2. Klik WAN 3. Find VPI/VCI: 8/81, Klik Edit 4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next 5. Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next 6. Cheklist Enable Bridge Service, Service Name: Speedy, Next 7. WAN Setup - Summary, Save 8. Save/Reboot
Setting PPPoE:
1. Klik Advanced Setup
2. Klik WAN 3. Find VPI/VCI: 8/81, Klik Edit 4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next 5. Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP- BRIDGING, Next 6. Put your PPP Username: nmrspeedy@telkom.net; PPP Password: (password dari telkom); PPPoE Service Name: Speedy, Next 7. Cheklist Enable WAN Service, Service Name: Speedy, Next 8. WAN Setup - Summary, Save 9. Save/Reboot
-------------------------------- Makin TINGGI makin BAIK
-------------------------------------------------------- 29,0 dB ~ ke atas = Outstanding (bagus sekali) 20,0 dB ~ 28,9 dB = Excellent (bagus) • Koneksi stabil. 11,0 dB ~ 19,9 dB = Good (baik) • Sinkronisasi sinyal ADSL dapat berlangsung lancar. 07,0 dB ~ 10,9 dB = Fair (cukup) • Rentan terhadap variasi perubahan kondisi pada jaringan. 00,0 dB ~ 06,9 dB = Bad (buruk) • Sinkronisasi sinyal gagal atau tidak lancar (ter-putus²). --------------------------------------------------------
Tabel 2: Klasifikasi Line Attenuation (Redaman pada Jalur)
---------------------------------- Makin RENDAH makin BAIK ---------------------------------------------------------- 00,0 dB ~ 19,99 dB = Outstanding (bagus sekali) 20,0 dB ~ 29,99 dB = Excellent (bagus) 30,0 dB ~ 39,99 dB = Very good (baik) 40,0 dB ~ 49,99 dB = Good (cukup) 50,0 dB ~ 59,99 dB = Poor (buruk) • Kemungkinan akan timbul masalah koneksi (tidak lancar, dsb). 60,0 dB ~ ke atas = Bad (amburadul) • Pasti akan timbul banyak gangguan koneksi (sinyal hilang, tidak bisa connect, dsb).