75%(4)75% menganggap dokumen ini bermanfaat (4 suara)
10K tayangan62 halaman
This standard covers mechanical and electrical aspects related to design, manufacture, erection and testing of electric overhead travelling cranes and gantry cranes. Electrical motors and electric thruster unit for brakes, limit switches, Pendant push button station and panels shall be of flameproof suitable for Gas (group 2c) as followed in the International Standards, structural provisions for cabin, walkways and means of access are not included in this standard. Provisions in is 807 for allowable stresses, deflection criteria, wheel base to span ratio
This standard covers mechanical and electrical aspects related to design, manufacture, erection and testing of electric overhead travelling cranes and gantry cranes. Electrical motors and electric thruster unit for brakes, limit switches, Pendant push button station and panels shall be of flameproof suitable for Gas (group 2c) as followed in the International Standards, structural provisions for cabin, walkways and means of access are not included in this standard. Provisions in is 807 for allowable stresses, deflection criteria, wheel base to span ratio
Hak Cipta:
Attribution Non-Commercial (BY-NC)
Format Tersedia
Unduh sebagai PDF, TXT atau baca online dari Scribd
This standard covers mechanical and electrical aspects related to design, manufacture, erection and testing of electric overhead travelling cranes and gantry cranes. Electrical motors and electric thruster unit for brakes, limit switches, Pendant push button station and panels shall be of flameproof suitable for Gas (group 2c) as followed in the International Standards, structural provisions for cabin, walkways and means of access are not included in this standard. Provisions in is 807 for allowable stresses, deflection criteria, wheel base to span ratio
Hak Cipta:
Attribution Non-Commercial (BY-NC)
Format Tersedia
Unduh sebagai PDF, TXT atau baca online dari Scribd