Created by :
2nd
Installing Processor
Place the Processor properly on the motherboard Pull down the lever to secure the CPU in place Apply the paste on top of processor
Place the heat sink on the processor Put the jacks in place Don't forget to connect the cable of the heatsink on the motherboard
Open the clips on the slot Socket of RAM Push down the RAM into the slots Make sure the both the clips hold the RAM properly
Pair the motherboard to the case Fasten the motherboard to the case with screw
Place the PSU into the cabinet Put the screws in place tightly
Remove the back plate on the cabinet corresponding to the graphics card Push the card into the slot Secure the card with a screw Plug in the power connection from PSU (if required)
Place harddisk into the case Secure the drive with screws Connect the power cable from Power Supply Connect the data cable from motherboard into the drive
Place Optic DVD into the case Secure the drive with screws Connect the power cable from Power Supply Connect the data cable from motherboard into the drive
Connect the large ATX power connector to the power supply port on your motherboard Next get hold of the smaller square power connector which supplies power to the processor and connect it to the appropriate port by taking help from your motherboard manual Connect the jumpers to the port in motherboard Plug the cable of cabinet fans
Connect VGA Cable into the VGA port. Connect mouse and keyboard into the PS/2 ports. Connect PowerCable into the port in the PSU Connect PowerCable in LCD to the port in PSU
PC is ready to use..