0
"Please read this document first." C onte nt s
1 Package Contents
2 2
2 Product Registration
3 Installation
Installation of manga Studio 4.0 5 Installation of materials (first-time startup) 8 Serial number Input (first-time startup) 9 Serial number 9 Installation of manga Studio 4.0 materials (other than first-time startup) 10 Installation of "Computones" (EX only) 11 Uninstallation 13
1 Package Contents
1
Package's Content Listing
2
User Registration
Product Registration
Thank you for purchasing our product. Please take a moment to register you software. Product registration entitles you to future upgrades, special discounts and offers, and product announcement. Product Registration is required prior to receiving support. You will be issued a User Id and a Support number for reference after registering you product.
3
Installation
(1)Online registration
Open your browser and visit the smith Micro Product registration page http://my.smithmicro.com/register
1
Package's Content Listing
2
User Registration
After you have registered your product, you will receive an email containing your User Id, corresponding password and Support number for reference. Please keep this email for your records.
3
Installation
registration by Mail 2
If you are registering your product by mail, please fill out the Product Registration postcard included in your package. Please write legibly and complete the entire card. no postage is necessary if mailed in the United States.
Serial number
1
Package's Content Listing
2
User Registration registration
3
Installation
Installation
The application installation must be performed by logging in to your computer with "system administrator" privileges. Please close all other applications, before starting with the installation.
Note:
1
Package's Content Listing
2
User Registration
step 1
3
Installation
step 2 step 3
The "Welcome to manga Studio 4.0 Setup" dialog will be displayed at the same time as the manga Studio 4.0 installation screen. Review the text in the dialog box and then click the "next" button.
When the "End-User License Agreement" is displayed, review the "manga Studio 4.0 Sof t ware License Agreement", and then select "I Agree" and click the "next" button. * Please note that if you do not agree to the "manga Studio 4.0 Software License Agreement," manga Studio 4.0 software cannot be installed.
step 4
step 6
1
Package's Content Listing
When the "Select Installation folder" dialog box is displayed, click the "next" button.
When the installation starts, the installations progress status will be displayed on the screen. Please wait until the "Installation Complete" dialog box appears.
2
User Registration
step 5
step 7
3
Installation
step 1
When the Confirm Installation" dialog box is displayed, click the "next" button.
W hen the "Installation Complete" dialog box is displayed, click the "Close" button. The application installation is now complete.
After completing the application installation, the tone and balloon materials are still not installed. To install those components, another step is necessary. Keep the "Application disc" still in the dVd drive, and read the instructions "Install content (firsttime startup)" on page 8.
For Windows XP
*for Windows Vista, refer to page 5. Place the "Application disc" for manga Studio 4.0 in your computers dVd drive. When the installation screen is displayed, click the "Install manga Studio" button.
*If the installation screen is not displayed, execute "autorun.exe," found on the "Application disc."
step 2
step 5
1
Package's Content Listing
The "Welcome" dialog will be displayed at the same time as the manga Studio 4.0 installation screen. Review the text in the dialog box and then click the "next" button.
step 3 step 6
When the "Selec t Program folder" dialog box is displayed, click the "next" button.
2
User Registration
When the "Software License Agreement" dialog box is displayed, review the "manga Studio 4.0 Software License Agreement" and then click the "Yes" button. Please note that if you do not agree to the "manga Studio 4.0 Product License Agreement," the manga Studio 4.0 software cannot be used.
When installation starts, the installations progress status will be displayed on the screen. Please wait until the "Installation Completed" dialog is displayed.
3
Installation
step 4
step 7
When the "Choose destination Location" dialog box is displayed, click the "next" button.
When the "Setup Complete" dialog box is displayed, click the "finish" button. The application installation is now complete.
After completing the application installation, the tone and balloon materials are still not installed. To install those components, another step is necessary. Keep the "Application disc" in the dVd drive, and read the instructions "Install content (first-time startup)" on page 8.
1
Package's Content Listing
2
User Registration
step 3
Once the materials installation has started, the progress When the "Installing materials" dialog box is displayed, click the "Install the materials" button. status will be displayed in the "Install material" dialog. Please wait for the installation to finish.
step 6
3
Installation
When "Select the material disc to install" appears in the "Install material" dialog box, click the "Install from disc" button. If the "Application disc" is not in the dVd drive, then insert the disc now.
step 7
When the materials installation is complete, a confirmation message will be displayed. Click the "OK" button.
*If "Continue without installing" is clicked, the materials installation will not be carried out. Proceed to "Input of serial number (first-time startup)" ( p.9). *If you wish to install the materials of manga Studio 4.0 at a later time, refer to "Installation of manga Studio 4.0 materials (other than first-time startup)" ( p.10). * for the installation of the materials on "Computones for manga Studio materials disc," refer to "Installation of Computones Built-in Tones" ( p.11). * The materials stored on each disc must be installed together. The materials within the folders cannot be individually chosen. (This cannot be done through the "Install from folder..." button, either.
When "Installation was completed successfully" is displayed after the materials disc name in the "Install material" dialog box, you can remove the "Application disc" from the dVd drive.
1
Package's Content Listing
If an alert is displayed, place the "Application disc" of manga Studio 4.0 into the computers dVd drive and then click the After installing the application, the serial number input dialog box is displayed only when manga Studio 4.0 is started the first time. Entering the products serial number and clicking the "OK" button validates the application disc and starts manga Studio 4.0. "OK" button.
2
User Registration
The serial number is found on the Cd Sleeve (debut) or Cd Case (EX). do not remove the "Application disc" from the dVd drive before the serial number input has been completed. note that if the serial number is lost, it cannot be reissued. T he serial number must not be revealed to third parties or left in a place where it is visible to a large number of people.
Note:
3
Serial number
The serial number is an important piece of information that is necessary in order to use manga Studio 4.0. Please keep it in a safe place and do not lose it.
Installation
Confusing characters:
during entry, note the difference between the following numbers and letters.
(1) numerical
(zero) and
alphabetical
(O)
(2) numerical
(one) and
alphabetical
(I)
(five) and
alphabetical
(S)
(eight) and
alphabetical
(B)
1
Package's Content Listing
If the materials stored on the "Application disc" are not installed when you start the program for the first time, then you can install the materials by following the steps described below.
Supported materials:
Application disc
2
User Registration
Installation method
Open manga Studio 4.0, and select "Install materials" from the "file" menu. Then, proceed to "Installation of materials (first-time startup)"( p.8).
3
Installation
10
Supported materials:
1
Package's Content Listing
Installation method
step 1 step 3
2
User Registration
Place the "Computones for manga Studio materials disc" (mS4CT) in your computers dVd drive and double-click on "Installer.exe" in the "Computones for manga Studio materials disc." When the "Select installation files" dialog box appears, check the "file to be installed" column. If tone files that you do not wish to install are present, select the tone files and click the "Remove<-" button.
step 2
step 4
Click the "OK" button in the "Select installation files" dialog. The tone files displayed in the "files on the folder" column will be installed.
3
Installation
When the "Browse for folder" dialog is displayed, select the dVd drive in which the "Computones for manga Studio materials disc" (mS4CT) is placed.
11
Uninstallation
1
Package's Content Listing
2
User Registration
3
Installation
12