Clearos Sebagai Standalone Server
Clearos Sebagai Standalone Server
MODEM : 192.168.1.1 COS : 192.168.2.1 LAN CLIENT : 192.168.88.10-192.168.88.18 MIKROTIK LAN INTERFACE KE MODEM LAN INTERFACE KE COS LAN INTERFACE KE LAN/HUB
(eth1) Nama Interface : WAN (eth3) Nama Interface : COS (eth2) Nama Interface : LAN
Masuk ke Mikrotik via WINBOX Pilih New Terminal > /ip dns static add address=192.168.2.1 comment="" disabled=yes name=proxy ttl=1d /ip firewall nat add action=dst-nat chain=dstnat comment="TRANSPARENT DNS" disabled=no dst-port=53 \ in-interface= LAN protocol=tcp to-ports=53 add action=src-nat chain=srcnat comment="1. DNS nat LAN" disabled=yes \ dst-address=0.0.0.0/0 out-interface="WAN" protocol=tcp src-address=\ 192.168.88.0/24 to-addresses=192.168.1.2 to-ports=0-65535 add action=src-nat chain=srcnat comment="2. LINK PROXY " disabled=yes \ dst-address=0.0.0.0/0 out-interface="WAN" protocol=tcp src-address=\ 192.168.2.0/24 to-addresses=192.168.1.2 to-ports=0-65535 add action=dst-nat chain=dstnat comment="3. TRANSPROXY lan" disabled=yes \ dst-port=80,8080 in-interface="LAN" protocol=tcp src-address=\ !192.168.2.1 to-addresses=192.168.2.1 to-ports=3128 add action=dst-nat chain=dstnat comment="4. Trans Proxy DNS" disabled=yes \ dst-port=53 in-interface="COS" protocol=tcp to-ports=53
KET : Status Script MT diatas pada posisi disable, jika smua langkah dlm tutorial ini telah dilakukan dgn berurut & sukses silahkan tuk meng-enable script diatas pada MT
Ubah
SQUID_TRANSPARENT="0n" SQUID_FILTER_PORT=""
Cari tulisan
nameserver 8.8.8.8 nameserver 8.8.4.4
Ubah
nameserver nameserver nameserver nameserver 202.134.1.10 203.130.209.242 8.8.8.8 8.8.4.4
3. Masuk ke Direktory
/etc/sysconfig/network-scripts EDIT
DEVICE=eth0 TYPE="Ethernet" ONBOOT="yes" USERCTL="no" BOOTPROTO="static" IPADDR="192.168.2.1" NETMASK="255.255.255.0" HWADDR="00:50:da:93:4c:53" GATEWAY="192.168.2.2"
5. Masuk ke menu : Gateway>Bandwith and Qos>Bandwith Input Upload dan Download kecepatan BW anda kemudian klik update
6. Buat Access Control tiap kelas IP (kelas tuk client) Masuk ke Menu : Gateway>Protocol Filter>Acces Control add time periods Beri nama : NonStop centang semua hari - set time 00:00 24:00
Kemudian masuk di menu Access Control list Name ACL Type Time-of-Day ACL Restriction Method of Identification Apply ACL to IP Address Update : LAN : Allow : NonStop : Within time restrictions : IP Address : 192.168.88.1
Selebihnya silahkan buat Access Control buat kelas IP lain yg membutuhkan 7. Login Menggunakan Putty Sebagai Root [root@system ~]# system squid restart
IP>Firewall>NAT enable kan direct yang tadi caranya Klik kanan Enable
a. http://www.lagado.com/proxy-test
c. Stafaband.info
KET : 1. 2. 3. 4. 5. SEBAIK NYA UPDATE MODUL DAN REGISTER CLEAROS ANDA. PERIKSA BAIK-BAIK PEMASANGAN KABEL JARINGAN ANDA. SEBELUM MULAI MENGOPREK SEBAIK TES PING MASING-MASING INTERFACE. JIKA MASIH BELUM SUKSES, SILAHKAN REVIEW KEMBALI LANGKAH2 ANDA. JANGAN MENYERAH DAN TERUS BERUSAHA. THANKS TO Seorang Chiwank (A Muh Ichwan P)
http://www.facebook.com/chev01 email : chev.010386@gmail.com
Tutor ini disadur dari tutor MT + Standalone Proxy COS.rsc by -chiwankSekian semoga ada TUT yang lebih baik lagi Email : hendrasyam@gmail.com