code
Issue Date
V4.1 2011-05-31
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied.
Page 2 of 64
Contents
1 Purpose and Application Scope.......................................................5 2 Terms............................................................................................6 3 Overview.......................................................................................8
3.1 License Control Mechanism....................................................................................................................................8 3.1.1 License Mode....................................................................................................................................................8 3.1.2 License Control Mode.......................................................................................................................................8 3.1.3 License Time Control........................................................................................................................................8 3.1.4 Floating License Mechanism.............................................................................................................................8 3.1.5 Emergency License............................................................................................................................................9 3.1.6 License Revoking (from R12 Onwards)............................................................................................................9 3.1.7 Commissioning License (Add restriction from R12 Onwards).........................................................................9 3.1.8 Trial License (from R12 Onwards)..................................................................................................................10 3.2 License Distribution System..................................................................................................................................11
4 Preparations................................................................................13
4.1 Applying for an FNO Account...............................................................................................................................13 4.2 Preparing an ESN..................................................................................................................................................13 4.2.1 GO Mode.........................................................................................................................................................13 4.2.2 UO/GU Mode..................................................................................................................................................14 4.3 GBSS License Mapping Relation..........................................................................................................................14 4.3.1 GBSS9.0..........................................................................................................................................................14 4.3.2 GBSS12.0........................................................................................................................................................15 4.3.3 GBSS13.0........................................................................................................................................................17 4.4 RNC License Mapping Relation............................................................................................................................18 4.4.1 RAN11.1/RAN12.0/RAN13.0.........................................................................................................................18 4.5 License Incompatibility or Exception In Different Versions.................................................................................18 4.5.1 GBSS...............................................................................................................................................................18 4.5.2 RNC.................................................................................................................................................................24
Guide to Application for BSC6900 License 5.4 Obtaining the License Revoking Code..................................................................................................................28
Page 4 of 64
Page 5 of 64
2
Acronyms and Abbreviation s License Expansion Description License License files LSN ESN License Key License Serial No. Equipment Serial Number Revoke Code
Terms
The license is a software sales mode. After obtaining certain promised rights and the license certificate, the customers are entitled to use features, versions, and the capacity within a specific period. That is, customers only have the use right, whereas the manufactures reserve all rights. Served as an entity for use right authentication, the license key file is an electronic document generated based on orders. The LSN uniquely identifies a license file. The ESN is a string that uniquely identifies the equipment and ensures that the license is authorized to the specific equipment. It is also called equipment fingerprint. The revoking code is a string that is obtained when a license revoking command is executed on the NE. The revoking code is a certificate for you to log in to the FNO to change the ESN. After the license revoking command is executed, the license file on the NE is revoked. The FNO is a license distribution system purchased by Huawei. This system generates and distributes license keys according to orders. This system also manages license data. Visit http://License.huawei.com to log in to the FNO. License Application Workflow is used to submit and review the commercial and non-commercial license applications in exceptional circumstances. Visit the workflow at the following website: http://w3.huawei.com/dominoapp/isc/license/platform.nsf/fmDatabase? ReadForm
Revoke Code
FNO
Flexnet Operations
Page 6 of 64
Expansion
Description
License Tool
License Tool makes license activation and adjustment efficient. This tool must be used with the FNO. Visit the following website to download the license tool. http://support.huawei.com/support/pages/editionctrl/catalog/ShowVersio nDetail.do? actionFlag=clickNode&node=000001481289&colID=ROOTENWEB| CO0000000174
PAC
Preliminary Acceptance Certificate Net element GSM Only UMTS Only GSM and UMTS Operating Support System
The PAC indicates that Huawei equipment passes the preliminary acceptance test. In this article, NE means BSC6900. The work mode of BSC6900 in GSM. The work mode of BSC6900 in UMTS. The multi-work mode of BSC6900 in GSM and UMTS. Operating Support System (OSS) is originally used in the telecommunication world to describe the processes and teams that monitor the underlying networks. Predominantly looks after the functional and non-functional requirements of solutions/systems. Monitoring, end-to-end design, and error handling tend to be the main areas of work. A duly issued/signed legally binding purchase commitment. When Huawei accepts the customer purchase order, it becomes legally binding for the selling entity. Usually a customer PO is based on a frame contract. In some cases, for some simple projects, there may be no frame contracts signed between Huawei and customer, POs are considered to be valid independently as general sales contracts. A Huawei-developed in-house tool for solutions configuration. Bill of Quantity The package license means that in the Configurator, the numbers of licenses in many NEs are quoted in a package and the package is transmitted to the FNO. The FNO disassembles the required number of licenses for each NE from the license package. At present, only the licenses for BTSs outside China use the package license mode. That is, the overseas Configurator integrates the licenses for BTSs in multiple controllers into a package before delivery. The number of licenses corresponding to a controller is disassembled from the package license of the BTS on the FNO according to the network planning.
NE GO UO GU OSS
PO
Purchase Order
Page 7 of 64
3
3.1 License Control Mechanism
3.1.1 License Mode
The BSC6900 can work in GO, UO, or GU mode.
Overview
The BSC6900 license files can also be in GO, UO, or GU mode. If the GO feature sections (LGMIBA and LGMIBA2) are not contained in the license file, it is a UO license. If the UO feature section (RNCBASIC) is not contained, it is a GO license. If both the GO and UO feature sections are contained, it is a GU license. The GU feature section (GUSPEC) is irrelevant to the mode of the license file. The license file mode must be consistent with the system operation mode. Otherwise, the license file cannot be activated.
License Forbid Threshold(%) is fixed to 115%. License Relieve Forbid Threshold(%) is fixed to 100%. License Alarm Threshold is set to 90%99%. License Resume Alarm Threshold(%) is set to 70%95%.
Precautions on license revoking are as follows: 1. Once the license revoking command is executed, the license is revoked and the data cannot be restored. Also, this command imposes serious impacts on the system. Run this command with caution. The license revoking command is not applicable to the case that the commissioning license is used or no license is used. The revoked license file on the NE cannot be activated again. If a license is revoked on the NE, the system sends a trial run alarm. That is, the license is still valid within 60 days since it is revoked. A new license must be applied within 60 days. Otherwise, the system has no license after 60 days and the services on the NE will be disrupted. The revoking operation of the license file must be performed on the source equipment. After the source equipment performed, whether to revoke the license file on other equipment is determined by GTS according to the carrier loyalty.
2. 3. 4.
5.
activated many times on the NE. Through the self-application process, the license can be applied for each ESN three times. Through the approval process, the license can be applied many times for each. License for a specific ESN, with a validity period of seven days. This type of license can be activated many times on the NE. It can be applied many times only through the self-application process. The license is used to deal with an emergency and takes effect as of the date of application. From R12 Onwards, restrictions of using the commissioning license on the NE whose ESN is ANY are as follows: 1. 2. 3. If the commercial license file is activated on the NE, the commissioning license file fails to be activated on the NE. If the commercial license expires on the NE, the commissioning license file fails to be activated on the NE whether the system enters the trial operation period or has no license. After the upgrade from R12 to a later version, the NE still uses the commercial license file of R12, instead of the new license file. The commissioning license file fails to be activated on the NE. Due to restrictions of old versions, the commissioning license can be activated on the NE that is upgraded to R12 from R11 or earlier.
4.
4.
5.
network should be used. 6. After the network is adjusted, expanded, and upgraded, to continue to use the feature, the customer needs to re-apply for the trial license.
License Application Workflow: It is used to submit and approve commercial and noncommercial license applications in exceptional circumstances. Visit the workflow on the following website: http://w3.huawei.com/dominoapp/isc/license/platform.nsf/fmDatabase?ReadForm
Page 11 of 64
License Tool: It improves license activation and adjustment efficiency. This tool must be used with the FNO. Visit the following website to download the license tool. http://support.huawei.com/support/pages/editionctrl/catalog/ShowVersionDetail.do? actionFlag=clickNode&node=000001481289&colID=ROOTENWEB|CO0000000174
Page 12 of 64
Preparations
The application workflow is for applying for the IT Account & Privilege rights (http://w3.huawei.com/dominoapp/oaf01/index.nsf/index?openform&App=itisr). For details, see the description in the workflow.
Page 13 of 64
The OPC must be bound with an activated cell in which the traffic volume is generated each 24 hours. Otherwise, the system regards the OPC invalid, and then enters the trail period and reports an alarm after the check every night.
81200267
82200954
If the core network equipment is provided by Huawei, this OSS feature must be configured.
Page 14 of 64
Remarks If the core network equipment is provided by Huawei, this OSS feature must be configured. This feature is restricted, and this OSS feature must be configured. If the core network equipment is provided by Huawei, this OSS feature must be configured. Mandatory
81201048
82201037
81201076
82200717
81201053
82201105 82201398
4.3.2 GBSS12.0
GBSC License Name PICO Solution Packet Function PICO Dual-band Auto-planning PICO Automatic Optimization Easy GSM Solution Packet Function 81201410 Pico BTS Frequency Automatic Optimizing -GBSS GSM Compact BTS Automatic Planning GSM Compact BTS Automatic Capacity Planning 82201338 Mandatory GBSC License Code 81200926 81201406 OSS License Name OSS License Code 82200722 Remarks
Mandatory
81200927
82200723 82200725
Mandatory
Page 15 of 64
Remarks
GSM Compact BTS Frequency Automatic Optimizing GSM Compact BTS Automatic Neighbor Relation Optimization-GBSS
Mandatory
Weather Adaptive Power Management RAN Sharing Function Encrypted Network Management Function MSC Pool Function
Weather Adaptive Energy Management -GBSS RAN Sharing ManagementGBSS Encrypted TransmissionGBSS MSC Pool Management-CN
Mandatory Mandatory Mandatory If the core network equipment is provided by Huawei, this OSS feature must be configured. If the core network equipment is provided by Huawei, this OSS feature must be configured. This feature is restricted, and this OSS feature must be configured. Mandatory
Gb Flex Function
81200456
82200963
BSC Node Redundancy Function GSM and UMTS Dynamic Power Sharing End-to-End MS Signaling Tracing Function 2G/3G Neighboring Cell Automatic Optimization Function
81201048
BSC Redundancy Management-GBSS MBTS Dynamic Power Sharing-GBSS GBSS Enhanced Subscriber Tracing
82201037
82201477
82201461
81201076
82200717
If the core network equipment is provided by Huawei, this OSS feature must be configured. Mandatory
81201053
82201105 82201398
Page 16 of 64
4.3.3 GBSS13.0
GBSC License Name PICO Solution Packet Function PICO Dual-band Auto-planning PICO Automatic Optimization Easy GSM Solution Packet Function 81201410 Pico BTS Frequency Automatic Optimizing -GBSS GSM Compact BTS Automatic Planning GSM Compact BTS Automatic Capacity Planning Automatic Neighbor Cell Planning and Optimization 82201429 GSM Compact BTS Frequency Automatic Optimizing GSM Compact BTS Automatic Neighbor Relation Optimization-GBSS Weather Adaptive Power Management RAN Sharing Function Encrypted Network Management Function MSC Pool Function 82201469 81200804 81201115 81200267 Weather Adaptive Energy Management -GBSS RAN Sharing ManagementGBSS Encrypted TransmissionGBSS MSC Pool Management-CN 81201449 82201297 82200936 82200954 Mandatory Mandatory Mandatory If the core network equipment is provided by Huawei, this OSS feature must be configured. If the core network equipment is provided by Huawei, this OSS feature must be configured. This feature is restricted, and this OSS feature must be configured. Mandatory 82200724 82201298 Mandatory 82201338 Mandatory GBSC License Code 81200926 81201406 OSS License Name OSS License Code 82200722 Remarks
Mandatory
81200927
82200723 82200725
Mandatory
Gb Flex Function
81200456
82200963
BSC Node Redundancy Function GSM and UMTS Dynamic Power Sharing
81201048
82201037
82201477
82201461
Page 17 of 64
GBSC License Name End-to-End MS Signaling Tracing Function 2G/3G Neighboring Cell Automatic Optimization Function
Remarks
If the core network equipment is provided by Huawei, this OSS feature must be configured. Mandatory
81201053
82201105 82201398
Solution
Versio n Path
License
Description about license incompatibility or exception maximum activated PDCH. This selling policy is only applied in China. For overseas market, the price of the inbuilt PCU board is not decreased. Therefore, this license is not sold in overseas market and the license is provided to customers by default. In the Quoter, the quotation is not provided. By default, the maximum license specifications are delivered.
Solution
81200638: Dynamic Shutdown Trx PA Function (per TRX) 81200639: Time slot Intelligent Power Optimization Function
For the versions earlier than 8.1, the BTS is not restricted and is allowed to use by default. The function is enabled in the current network. If certain customers do not purchase the function, and the system is upgraded to the GBSS8.0 or later version, the power consumption of the entire network rises. Before the GBSS 9.0, the single carrier in multi-transceivers is not controlled by license; after GBSS 9.0, when the single carrier power is between [60W, 80W), the single carrier is controlled by 60 W power license. When the single carrier is between [80W, ), it is controlled by the 80W license. If the power higher than 60 W of the single carrier is configured before the GBSS 9.0 on the current network, after upgrading to the GBSS 9.0, owing to the lack of licenses, the configuration will be restricted after the license file is activated. The field engineers must check the license item before upgrading.
Energy-saving feature; the feature does not affect the network greatly owing to the limited number of offices. Do not promote the feature initiatively. The license should be purchased. If any problem is encountered, any question will be processed by the marketing engineers.
82201139: 60W High Power Resource 82201140: 80W High Power Resource
1.
If the GBSS 8.1 is upgraded to the GBSS 9.0 or later version, the customers have configured the high-power capability, the field engineers should sell the 60W or 80W licenses.
If the customer is willing to purchase the feature, quote by inserting license BBOM (82201139 and 82201140) into GBSS9.0 configurator. The license is delivered normally through the configurator. If the customer refuses to repurchase the license in the upgrade, apply for the relevant license through exceptional application (Upgrade version--Feature Non-compatibility among version).
2.
Upgrade the GBSS 9.0 to higher version. If the customer is not configured with the single carrier high-power capability, the field sales engineers should try to sell the 60W and 80W high power licenses. In the GBSS 9.0, quote by inserting license BBOM. In GBSS 12.0, quote in the BTS configurator.
Page 19 of 64
Versio n Path Upgrade from GBSS 8.X to GBSS 9.0, or later versions
License
Description about license incompatibility or exception The associated GBSS 8.X of the BTS3900 series BTS support the Clock over IP (private protocol); the associated GBSS9.0 does not support the Clock over IP (private protocol) but support the Clock over IP (1588V2). Before upgrading (GBSS 8.X), if customers purchased the Clock over IP (private protocol) for the BTS3900 series equipment, after upgrading to the GBSS9.0, the Clock over IP (private protocol) is not supported, at the same time, the Clock over IP (1588V2) license is not available, the BTS cannot user the Clock over IP function.
Solution
81201119: Clock over IP Function 81201050: Clock over IP support 1588V2 Function
For the offices in which the associated 3900 series BTSs using the GBSS8.X Clock over IP function, after the field engineers upgrades the version to GBSS9.0 or later version, ensure the 81201050:Clock over IP support 1588V2 Function license is delivered. The license application template and the FNO support the automatic conversion. The GTS processes the task according to the license upgrading flow.
81201170: Multi-Carrier Intelligent Voltage Function 81200639: Time slot Intelligent Power Optimization Function
For the versions earlier than V9R8C12SPH15, two functions are controlled by one license. The SP15 version splits the Multi-Carrier Intelligent Voltage Function to be controlled by respective license. When the earlier V9R8C12SPH15 version is upgraded to the GBSS 9.0, no matter whether the Time slot Intelligent Power Optimization Function is enabled, the MultiCarrier Intelligent Voltage Function is disabled. The field engineers must check the license item before upgrading.
1.
For the upgrade of the customers who buy the Time slot Intelligent Power Optimization Function only, the delivery of license is not required and the Multi-Carrier Intelligent Voltage Function should be disabled. If users enable the function, enter the restricted configuration mode. The normal status can be restored only after the MultiCarrier Intelligent Voltage Function is disabled. For the upgrade of the customers who have purchased the Multi-Carrier Intelligent Voltage Function, exceptional application for the license (Upgrade version--Feature Noncompatibility among version) should be performed. The base of the approval is that the 81201170 license is contained in the contract BoQ.
2.
The 2G/2G Neighboring Cell Automatic Optimization is a test function in the GBSS 8.X. In the GBSS9.0 package feature, the license control function is added. The function is unavailable after upgrading. The 2G/2G Neighboring Cell Automatic Optimization Function is changed to out of
For the Neighboring Cell Automatic Optimization Function, if the data source of the BSS is not controlled, it is risky that the carrier or a third party may use the function. Therefore, the BSS reserves the license control of the GSM Neighboring Cell Automatic Optimization Function. Redeliver the GBSS license for the office to which the associated OSS feature GSM Neighboring Cell Analysis is sold.
Page 20 of 64
Versio n Path
License
Description about license incompatibility or exception control of the license in V9R11SPH726. From the version on, special processing is not required, namely, perform normal operation. The 2G/3G Neighboring Cell Automatic Optimization Function is a new feature in version 9.0. No problem is encountered in this feature.
Solution
81201129: Short Message Service Cell Broadcast (TS23) Function 81201130: Simplified Cell Broadcast Function 81201182: NC2 Function 81201181: NACC Function
The resource item of the BSC6000 is changed into the switch item. If the Number of TRXs supporting short message service cell broadcast (SMSCB) in the original license file is greater than 0, the 81201129 and 81201130 in the license file of new version should be enabled, namely 1. If the Number of cells supporting NACC in the original license file is greater than 0, the 81201181 in the license file of new version must be 1; if the Number of cells supporting NC2 in the original license file is greater than 0, the 81201182 in the license file of new version must be 1. The service patches before the BSC6900 R12SPC506/R11C01SPC506 (customized by China Mobile) are faulty. The air interface soft synchronization redundant data is checked in a centralized mode. As a result, in the case of activating the license after the upgrade, the configuration is restricted. The R11C00 and R13 version is normal.
The license application template and the FNO support the automatic conversion. The GTS processes the task according to the license upgrading flow.
Refer to Pre-warning for the Fault That The Configuration Data Exceeds the License authorization in the Case of Activating License File After Upgrading BSC6000 to BSC 6900 V900R012.
Page 21 of 64
License
Description about license incompatibility or exception The R11 test function, in the R12 package feature, the license control function is added. As a result, the configuration is restricted after the R11 office configured with Allow Incoming BSC Handover at Iur-g is upgraded to R12. The field engineers must check the license item before upgrading.
Solution
1.
The test function is commercial in GBSS12.0, and the license should be purchased. Before upgrading, discuss the license change with the office in advance. The test function in old version should be closed if the configuration is restricted after upgrading.
2. 3.
82201949: Multi Technology Neighbor Cell Based Handover 82202060: Fast LTE Reselection at GSM CS Call Release 82202061: CSFB
The R12 test function, in the R13 package feature, the license control function is added. As a result, the configuration is restricted after the R12 office configured with the parameters is upgraded to R13. The field engineers must check the license item before upgrading. In R12, parameters are embedded and licenses are not embedded. In R13 package feature, the license control function is added. The parameter upgrade takes the compatibility into consideration. Therefore, the configuration is not restricted. For the users do not purchase the license, in the upgrading to R13, the configured parameters will not be delivered to the BTS and the function cannot be used. The configuration of SI2Quater and SI13 sent by extended BCCH is not controlled by license in GBSS9.0 and GBSS12.0, controlled by license in GBSS13.0. The field engineers must check the license item before upgrading.
1.
The test function is commercial in GBSS13.0, and the license should be purchased. Before upgrading, discuss the license change with the office in advance. The test function in old version should be closed if the configuration is restricted after upgrading.
2. 3.
1.
1.
The test function is commercial in GBSS13.0, and the license should be purchased. Before upgrading, discuss the license change with the office in advance. The test function in old version should be closed if the configuration is restricted after upgrading.
2. 3.
Upgrade
81200926:
License
Description about license incompatibility or exception R12 license usage report is mapped by 82200086: Maximum TRX number allowed Resource; for R13, the value is mapped by 82201439: Maximum PICO TRX number allowed Resource. As PICO can borrow the macro BTSs license, the authorization value could be 0 and the usage value is larger than 0 after upgrading.
Solution
Whether or not to activate the PICO Solution Packet function 81201406: PICO Dualband Autoplanning 81201407: PICO USB Encryption 81201408: PICO Access Control List(ACL) 81201409: PICO Sleeping Mode 81201410: PICO Automatic Optimization
Upgrade from GBSS 12.0 to GBSS 13.0, or later versions Upgrade from GBSS 9.0 to GBSS 13.0, or later versions
81201411: Compact BTS Timing Power Off 81201412: Local User Management 82200192: Flex Abis Resource
The authorization value in the R12 license usage report is mapped by 82200086: Maximum TRX number allowed Resource; for R13, the value is mapped by 82201429: Automatic Neighbor Cell Planning and Optimization. The R11/R12 only counts the channel occupation of the CS and that of the PS is not counted. The R13 counts the PS channel. After the version is upgraded to R13, the value may be increased.
The authorization values in the license usage report are different, but the functions are not affected.
If the alarm of exceeding the license limit occurs after upgrade, the usage will not be affected and version rollback is not required.
Page 23 of 64
4.5.2 RNC
Versio n Path License Description about license incompatibility or exception Automatically reward this license. Solution
Upgrade from RAN10 to RAN11.0 or later version Upgrade from V2R9 to V2R10 or later versions
The license application template and the FNO support the automatic conversion. The GTS processes the task according to the license upgrading flow.
The V2R9 is sold but the license is not embedded. In V2R10, the license is embedded. After upgrade, there is no license and relevant functions are disabled. The field engineers must check the license item before upgrading.
Re-deliver these licenses through the exceptional application (Upgrade version-Feature Non-compatibility among version).The network design engineers approve the application according to the contract BoQ information.
Re-pack the license in RAN11.1. After the upgrade, no license is available. The simplified cell shutdown function is disabled. The field engineers must check the license item before upgrading.
For the offices purchased 81200086:Cell broadcast service, if the embedded CBC server is used, re-deliver the license through exceptional application (Upgrade version-Feature Non-compatibility among version).The network design engineers approve the application according to the contract BoQ information. For the offices have used the Iu interface satellite transmission, re-deliver the license through exceptional application (Upgrade version--Feature Non-compatibility among version).The network design engineers approve the application according to the contract BoQ information.
Re-pack the license in RAN11.1. After the upgrade, no license is available. Constructing satellite link in the Iu interface is not allowed. The field engineers must check the license item before upgrading.
Page 24 of 64
AMR
This license controls wideband AMR service establishment according to the design specifications of RAN13.0. In versions earlier than RAN13.0, this license, however, does not take effect. If the wideband AMR function is enabled at a site but the operator does not purchase the license, an upgrade to RAN13.0 will cause a failure in establishing wideband AMR services.
If the wideband AMR function is enabled at a site, the operator must apply for the license. Otherwise, wideband AMR services may be interrupted.
The field engineers must check the license item before upgrading.
Upgrade to RAN13.0 or later versions 81200079: AMR Rate Control License This license controls rate adjustments of AMR services (including wideband and narrowband AMR services) according to the design specifications of RAN13.0. In versions earlier than RAN13.0, this license, however, does not control rate adjustments of wideband AMR services. If the wideband AMR rate control function is enabled at a site but the operator does not purchase the license, an upgrade to RAN13.0 will cause a failure in adjusting the rates of wideband AMR services. If the wideband AMR rate control function is enabled at a site, the operator must apply for the license. Otherwise, rates of wideband AMR services cannot be adjusted.
The field engineers must check the license item before upgrading.
Page 25 of 64
5
Procedure
This chapter describes how to obtain the license file, query the ESN, install, and revoke the license.
Step 2 On the LMT, run the ULD LICENSE command to upload the license file to the PC.
Page 26 of 64
Page 27 of 64
Step 2 On the LMT, run the DLD LICENSE command to download the license file to the NE. See the following figure.
Step 3 On the LMT, run the LST LICENSE command to query the items specified in license file. Check whether the ESN specified in the license file the same as that of the NE. Check the command execution result to determine whether the license expires and whether the function items specified in the license file are the same as those of the applied ones. If they are not the same, apply for a new license file. Step 4 On the LMT, run the ACT LICENSE command to activate the specified license file. For details on precautions, see the online help of the command. Pay special attention to the following items: 1. When the GO/GU license is activated, the consistency check needs to be performed between the configured data and license data. During feature configuration, the consistency check also needs to be performed. If the consistency check fails, the features will fail to be configured. When the UO license is activated, the consistency check between the configured data and the license data is ignored. Features can be enabled only when both the feature configuration and the license switch take effect. The license file mode must be consistent with the system operation mode. Otherwise, the license file cannot be activated. You can run the LST MBSCMODE command to query the system operation mode. The BSC6000 and BSC6810 are single-mode products. Therefore, there is no license mode problem. The LST MBSCMODE command does not work on the BSC6000 or BSC6810.
2.
3.
4.
Page 28 of 64
The license revoking code is in format of LSN: an encrypted string, as shown by the "Revoking Code" field in the preceding figure.
Page 29 of 64
Instructions on License
The ESN is not ANY and the validity period is three months. One NE can download this type of license only three times from FNO.
Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd Page 30 of 64
The ESN is not ANY and the validity period is seven days. This type of license can be downloaded many times as required.
As a non-commercial license, the commissioning license must be replaced by a permanent commercial license. The BSC6900 can only support the self-application for a commercial license available for three months or seven days for an ESN that is not ANY. For the self-applied license, all license items are set to the same value. If special requirements are raised, fill the non-commercial license template and obtain the license through the License Application Workflow. Prior to version upgrade, a commercial license file which has a validity period of seven days and carries an ESN is required for emergency use. If the self-application does not work, fill the non-commercial license template and obtain a license through the License Application Workflow.
Procedure
Step 2 Enter the user name and password in the CHINA domain to log in to the FNO (http://license.huawei.com). Step 3 Click Download Commissioning License on the left navigation tree. The Download Commissioning License dialog box is displayed.
Step 4 Click Search. In the displayed Select Product dialog box, enter the product name in the Product Name text box and click Search. Commissioning licenses for all product versions are displayed. Select the specific version and click Confirm.
Page 31 of 64
The following versions are for the BSC6900: V900R013 (GO China Mobile): indicates V900R013 used by China Mobile. V900R013 (UO): indicates V900R013 UO used globally. V900R013 UO (GO Overseas): indicates V900R013 GO used by overseas market and China Unicom. V900R013 (GU): indicates V900R013 GU used globally. The following versions are for the BSC6810: V200R010 (ALL): indicates V200R010 used globally. V200R011 (ALL): indicates V200R011 used globally. The following versions are for the BSC6000: V900R001 (ALL): indicates V900R001 used globally. V900R003 (ALL): indicates V900R001 used globally. V900R008C01 (ALL): indicates V900R001 used globally. V900R008C12 (ALL): indicates V900R001 used globally. V900R008C15 (ALL): indicates V900R001 used globally. The following versions are for the BSC6800: V100R010 (ALL): indicates V100R010 used globally. V100R011 (ALL): indicates V100R011 used globally. V100R012 (ALL): indicates V100R012 used globally.
Step 5 The Download Commissioning License dialog box is displayed, as shown in the following figure. Select a type in the Type drop-down list box. Information about control items of this commissioning license is displayed.
Page 32 of 64
You can download the ESN-specific commissioning license of three months or seven days. The license of three months can be downloaded for one NE only three times. Enter the ESN in the ESN text box, set Expiration Term, and click Submit. The License Key File page is displayed.
Page 33 of 64
Resource-BSC6000-LGMITRU60WNO-Number of High Output Power TRU Resource-BSC6000-LGMIDULNO-V9R1&V9R3:Number of DTRU which works as Dual Transceiver;V9R8: Number of Multi transceivers Resource-BSC6000-LGMIPBTNO-V9R1&V9R3:Number of DTRU which Transmitter is PBT;V9R8:Number of multi-transceivers supporting PBT transmit Resource-BSC6000-LGMIDIVNO-V9R1&V9R3:Number of DTRU which Transmitter is Diversity Transmitter;V9R8:Number of multi-transceivers supporting diversity transmit
82200171
Page 34 of 64
82200176
Resource-BSC6000-LGMI4DIVNO-V9R1&V9R3:Number of DTRU which Receiver is Four Diversity Receiver;V9R8:Number of multi-transceivers supporting 4-way receive diversity
Procedure
Step 1 Obtain the ESN of the NE. Step 2 Query the license order line based on the contract number. Enter the ESN to bind one license file. 1. 2. Enter user name and password in the CHINA domain to log in to the FNO (http://license.huawei.com). Enter the Online Single Activation page by choosing GTS Portal > Activate License > Online Single Activation from the navigation tree.
Page 35 of 64
3.
Select Contract NO.(PO) in the Search By drop-down list box and enter the contract number in the Search For text box. Click to query all order lines corresponding to the contract.
4.
Select the order line to be activated. Click Activate to open the following license activation window. Then, click Next and enter the ESN bound with the license to be activated.
Click Add New ESN and enter the ESN in the ESN text box in the following dialog box.
5.
Click Generate to open the license download dialog window. Click Download Licenses to download the license file to the PC.
Page 36 of 64
6.2.3 Applying for the License for One NE Online After Spliting Package
Procedure
Step 1 Obtaining the ESN of the NE Step 2 Click the Split Package Order at the navigation tree to enter the Split Package Order page. The package orders are displayed in this page. Enter the contract number to query the relevant package order. Select the package to be split. Then, click Next to enter the page for splitting the package.
Step 3 Type the ESN and the number of copies to be split. Then, click Submit. After submission, the FNO creates a task to run automatically in the server.
Page 37 of 64
Step 4 After the task is complete, the FNO sends mails to the email address of the submitter. Obtain the task ID from the email. Then, log in to the FNO system. The My Task page is displayed by default. Type Task ID to query the relevant task.
Step 5 Merge the license file split from the GBTS package and the license file of the GBSC. 1. Click Manage Licenses at the navigation tree. The Manage Licenses page is displayed.
Page 38 of 64
2.
In the Search By option box, select ESN and type the NE ESN in the edit box of Search For. Click to query all licenses of the NE.
3.
Select all NE licenses of the same product. Click Consolidate. The page for downloading consolidated files is displayed. After selecting the consolidated files to be downloaded, click Save to File to save the files to the local computer.
Page 39 of 64
Version Before Upgrade BSC6000 V900R001 BSC6000 V900R003 BSC6000 V900R008 BSC6810 V200R010 BSC6810 V200R011 BSC6000 V900R001 BSC6000 V900R003 BSC6000 V900R008 BSC6810 V200R010 BSC6810 V200R011 BSC6000 V900R001 BSC6000 V900R003 BSC6000 V900R008 BSC6810 V200R010 BSC6810 V200R011
BSC6900 V900R012
BSC6900 V900R012
BSC6900 V900R013
BSC6900 V900R013
For the upgrade of the following versions, exceptional application for license is required. Version Before Upgrade BSC6810 V200R009 Version After Upgrade BSC6900 V900R011 BSC6900 V900R012 BSC6900 V900R013 Application Mode of the License For the exceptional application, follow the process of Upgrade version to fix the bug in The authorized work notification.
Page 40 of 64
BSC6810 V200R009
For the exceptional application, follow the process of Upgrade version--Feature Noncompatibility among version.
Procedure
Step 1 Obtain the ESN of the NE. Step 2 Enter the ESN. Active the license order line for the NE capacity expansion to generate a new license file. For details, see step 2 of section 6.2.2 "Applying for One License Online Each Time." For the GBTS expansion, determine whether splitting the license into the expansion licenses belonging to different BSCs based on the actual condition. For the splitting procedure, refer to step 2 to step 4 in section 6.2.3. Step 3 Consolidate the license file for capacity expansion and the existing license file. 1. 2. 3. Click Manage Licenses on the navigation tree. The Manage Licenses window is displayed. Select ESN in the Search By drop-down list box and enter the ESN in the ESN text box. Click to query all license files of the NE. Select the license files of the NE, and then click Consolidate. The license file download window is displayed. Select the consolidated license files to be downloaded, and then click Save to save the license files to the PC.
Page 41 of 64
After the FNO phase-2 is online, the licenses of different product names and VR versions can be adjusted offline by using the license tool.
Step 1 Obtain the revoking code of the NE license file that needs to be adjusted. Step 2 Enter the revoking code in the FNO for the license adjustment and then generate the license file. 1. 2. Enter the user name and password in the CHINA domain to log in to the FNO on the website: http://license.huawei.com. Click Online Adjustment on the navigation tree. The Online Adjustment dialog box is displayed.
Page 42 of 64
3.
Enter the revoking code of the license file for the NE to be adjusted and click Search. The capacity of the license file corresponding to the revoking code is displayed.
4.
Increase or decrease the license capacity of each NE and click Submit. The license file adjustment task is created on the FNO.
Page 43 of 64
After the task is created successfully, the following dialog box is displayed.
5.
Click My Task. In the displayed My Task dialog box, check Task Status of all tasks. The system performs tasks in sequence.
6.
After the task is finished, the FNO sends an Email to the person who submits this task. Obtain Task ID from the Email and log in to the FNO again. By default, the My Task dialog box is displayed. Enter the task ID to query specific tasks. Download the .zip file in the Task Result Download column and save it in the PC.
Page 44 of 64
Or, after the task is submitted successfully, click Search in the My Task dialog box to check whether the task is finished. The Task Status column cannot be automatically updated. Therefore, you are advised to click Search every ten seconds to check whether the task is finished. Step 3 Install the adjusted license files to the NEs.
Page 45 of 64
Step 4 Export the license files to be adjusted and revoking codes from the M2000 or LMT. Step 5 Enter the license file information and revoking codes and adjust the license files on the License Tool. Then, export the adjusted license files. The following describes the operation on the same VR version. 1. Import the NE license information or license file information a. In the start interface of the License Tool, click Adjust License. In the popup dialog box of License Information, click Import. Select one or multiple license files (.dat). Then, click OK. b. In the License Information dialog box, the selected license files are displayed. If certain license files are invalid or repeated, the system prompts that the import failed. Select the records with the same product name and customer name to import. If the preceding information does not match, the system prompts the error. Users can edit the revoke code in the interface.
c. Click Ok to import license files. Details about all selected license files are displayed in the License Tool Adjust License dialog box. 2. Adjust the capacity of license files. In the License Tool - Adjust License interface, select the license files to be adjusted. Type relevant values in the Change to adjust the current license.
Page 46 of 64
3.
Export the adjustment result. a. In the License Tool - Adjust License interface, click Export. The License Adjustment Summary dialog box is displayed.
Page 47 of 64
b. Click Export. The Save dialog box is displayed. Click Save. Step 6 Import the adjustment results generated by the License Tool to the FNO to generate new license files. 1. 2. Enter the user name and password in the CHINA domain to log in to the FNO (http://license.huawei.com). Click Offline Adjustment on the navigation tree. The Offline Adjustment dialog box is displayed.
3.
Import the result summary in .html format that is adjusted by the License Tool. Then, the system resolves and displays this file. After confirming the information, click Submit. Activation tasks are created on the FNO in batches.
Page 48 of 64
After tasks are created successfully, the following dialog box is displayed.
4.
Click My Task. In the displayed My Task dialog box, check Task Status of all tasks. The system performs tasks in sequence.
5.
After the task is finished, the FNO sends an Email to the person who submits this task. Obtain Task ID from the Email and log in to the FNO system again. By default, the My Task dialog box is displayed. Enter Task ID. Specific tasks are queried. Download the .zip file in the Task Result Download column and save it in the PC.
Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd Page 49 of 64
Or, after the task is submitted successfully, click Search in the My Task dialog box to check whether the task is finished. The value of Task Status cannot be automatically updated. Therefore, you are advised to click Search every ten seconds to check whether the task is finished. Step 7 Install the adjusted license files to the NEs.
Log in to http://w3.huawei.com/dominoapp/isc/license/libvcg.nsf/fmDatabase?ReadForm. Select Platform License Application. Choose New Application > Commercial License.
Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd Page 50 of 64
The Platform Commercial License Application window is displayed. Set Main Scenario to License adjustment between NE and Sub Scenario to License adjustment before PAC.
3.
Fill in the form according to workflow requirements. Attach the adjustment result in .html format to the workflow, and then click Submit.
Step 11 Download the adjusted license files from the license application workflow. Step 12 Install the adjusted license files to the NEs.
3.
Issue V4.1 (2011-05-31)
Fill in the form according to workflow requirements. Attach the adjustment result in .html format to the workflow, and then click Submit.
Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd Page 51 of 64
Step 4 Download the adjusted license files from the license application workflow. Step 5 Install the adjusted license files to the NEs.
3.
Enter the revoking code corresponding to the license file to be changed and the new ESN. Click Submit to submit the ESN change task. After the task is created successfully, the following dialog box is displayed.
Page 52 of 64
4.
Click My Task. In the displayed My Task dialog box, check Task Status of all tasks. The system performs tasks in sequence.
5.
After the task is finished, the FNO sends an Email to the person who submits this task. Obtain Task ID from the Email and log in to the FNO system again. By default, the My Task dialog box is displayed. Enter Task ID. Specific tasks are queried. Download the .zip file in the Task Result Download column and save it in the PC.
Or, after the task is submitted successfully, click Search in the My Task dialog box to check whether the task is finished. The Task Status cannot be automatically updated. Therefore, you are advised to click Search every ten seconds to check whether the task is finished. Step 3 Installing the License File on the NE
http://w3.huawei.com/dominoapp/isc/license/platform.nsf/fmDatabase?ReadForm 2. Select Platform License Application. Choose New Application > Commercial License. The Platform Commercial License Application window is displayed. Set Main Scenario to ESN changing and Sub Scenario to ESN changing before PAC or ESN changing after PAC.
3. 4.
Then, enter the original ESN, new ESN, and other related information. Click Upload to upload the license file corresponding to the ESN to be changed. After the application is approved, obtain the new license file from the workflow.
Procedure
Step 1 Enter the user name and password in the CHINA domain to log in to the FNO (http://license.huawei.com). Step 2 Click Rollback Disabled License under the left navigation tree. The Rollback Disabled License window is displayed.
Page 54 of 64
Step 3 Enter the revoking code corresponding to the license that is revoked on the NE. Then, click Submit.
Step 4 No task is created during the rollback. After the revoking code is submitted, a new license file is returned. Click Save to save this file.
Page 55 of 64
Procedure
Step 1 Obtain the commercial license file from an NE. Step 2 Fill in the trial license application workflow. 1. 2. Visit the following website to log in to the license application workflow: http://w3.huawei.com/dominoapp/isc/license/platform.nsf/fmDatabase?ReadForm Select Platform License Application. Choose New Application > Commercial License. The Platform Commercial License Application page is displayed. Set Main Scenario to Temporarily License application and Sub Scenario to Experience new feature before purchasing.
The trial license is supported after the V900R012.
3.
Click Get License Application Template to obtain the license template. Then, click Trial License Tool, and then import the commercial permanent license file extracted from the NE.
Page 56 of 64
4.
Enter the applicant, contract number, deadline of the trial license, and involved features.
5.
Attach the compressed trial license file and license application template to the license application workflow for exceptional cases. See the following figure.
Page 57 of 64
6.
After the application is approved, obtain the trial license file from the workflow.
6.8.1 Procedure
(1) Visit the following website: http://w3.huawei.com/dominoapp/isc/license/platform.nsf/fmDatabase?ReadForm
(2.1) For the application of a Huawei commercial license, click Then, choose New Application > Commercial License. Fill in the following license application form.
Page 58 of 64
(2.2) For the application of a Motorola commercial license, click Then, choose New Application > Commercial License. Fill in the following license application form.
(3) After selecting the NE for which the license is applied, click to download the latest commercial license application form for the related NE version. Then, fill this application form by referring to the help information in the form and the information about the live network.
Issue V4.1 (2011-05-31) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd Page 59 of 64
(4) Select the application scenario according to the prompt of the website. The website prompts the files to be submitted. Compress and upload the attachments according to the prompt. If the selected scenario is incorrect, the license center will reject the application. If the users are not sure about the scenario, contact the license center or profit representative. (5). After these files are submitted, the License Distribution Center (LDC) will provide the license file in the workflow. In certain scenarios (such as quotation template), the LAC is provided. The field engineers use the LAC code. Bind the ESN activation license file through http://license.huawei.com/.After obtaining the license file, the license application process is complete. To ensure that the total license capacity remains the same before and after the adjustment, the licenses (especially the licenses with reduced capacity) obtained after the network adjustment must be loaded to the corresponding BSC6900.
Page 60 of 64
Page 61 of 64
For office 2007, enable all macros according to the following figure.
When the modification of the template is complete, before saving the modification, the office 2007 will prompt the compatibility problem. Ignore the prompt messages and click OK. 2. If the local language of the Windows operating system is not Chinese or the simplified Chinese character set is not installed, an error occurs when you use the template. To rectify this error, install the simplified Chinese character set or fill in the license application template and send it to the Chinese staff to generate the template. If the license of the old version is upgraded to a new version, select the Version Upgrade Tools sheet and select Old Release BSC Mode and Change from XXX on the sheet. Then, click Input original file and change. In UMTS mode, if you confirm that the builtin CBC and Iu interface adopt the satellite transmission mode, enter the information about the old version and new version by following the prompts. After that, click Copy to Application Table. Then, the upgraded license data is automatically imported to the Application Table sheet. After filling the site information in yellow cells, click Check and Generate to generate the license data in green cells. If the capacity expansion is based on the old license, select the Application Table sheet. Click Import License File and enter the specific information in yellow cells of the Add column. Then, click Check and Generate to generate the license data in green cells. If there is no old license, fill each item in the Application Table sheet. The correlation (see the feature list and feature description of the NE) between features cannot be automatically established through the license application template. Before filling in the template, determine features to be activated and their dependent features. To ensure that all related features are included, collect all features to be activated and their dependent features before applying for the license.
3.
4.
5. 6.
Page 62 of 64
7
No. 1 Person 2 3
Responsibility 1. Responsible for solving problems concerning the workflow for distributing the commercial license 2. Responsible for solving problems concerning operations on the FNO and License Tool
Responsible for handling FNO-related exceptions Responsible for solving problems concerning the application of the FNO account as well as FNO login failures BSC6900 GO license coordinator BSC6900 UO license coordinator BSC6900 GU license coordinator GSM profit representative UMTS profit representative SRAN profit representative
4 5 6 7 8 9
Zhou Yu(employee ID: 00151771) Han He Sheng (employee ID: 00137728) Huang Bin (employee ID: 00168074) Qiu HuaiShan (employee ID: 53000) Han XiaoXing(employee ID: 42667) Huang Ping(employee ID: 00120848)
Page 63 of 64
8
No. 1 2 3 Document Name Commercial License Distribution Process 3.1 License Distribution System User Guide V1.0 BSC6900 Deployment Guide
References
Page 64 of 64