Anda di halaman 1dari 3

P O W E R

T R A N S M I S S I O N

P R O D U C T S

V - B E L T

H Y- T W E D G E

A P P L I C AT I O N S
Narrow profile belts for compact, high horsepower drives and high shock loading on short centers and small diameters. For designing compact, heavy-duty drives where space limitation is a factor.

K E Y F E AT U R E S & B E N E F I T S
Narrow profile provides savings through efficiency. Greater horsepower than the classical belt. Strong Vytacord (polyester) tensile members. High-grade engineered rubber. Oil, heat, ozone, and abrasion resistant. Available in raw-edge construction with cogs or envelope construction. Matchmaker to eliminate mismatch. Static conductive.

Part No: 5V1400 5V .62" Top Width Narrow Profile 1400 140.0" Nominal Outside Length Envelope Uncogged Construction Shown

A NARROWER CROSS SECTION & STRONGER CONSTRUCTION REDUCES DRIVE COSTS


The savings start in the basic wedge or narrow design of the HY-T Wedge belt. It has a narrower cross section than standard V-belts so it distributes stresses more uniformly to deliver more consistent, more reliable power transmission. A narrower cross section means the belts are smaller and weigh less. Smaller belts allow for the use of smaller and lighter sheaves, resulting in a more efficient drive. The savings continue through the higher horsepower capacity provided by Go o d year HY-T V-belt construction. Vy t a c o rd tension members, provide strength and dimensional stability. Higher horsepower capacity is also provided through a tough engineered rubber compound cushion, adding to belt strength. HY-T Wedge is so strong that small sheave diameters arent a problem. Its often possible to achieve a required horsepower with fewer HY-T Wedge belts than with standard V-belts, reducing sheave size, sheave costs, and belt costs even more. Since less power is required to run the smaller, lighter drives, more power gets to the load. Therefore, you may be able to downsize drive motors and/or increase drive efficiency for even more savings.

WEDGE OR ENVELOPE CONSTRUCTIONS PROVIDE OPTIMUM PERFORMANCE


HY-T Wedge belts are available in a raw-edge construction with cogs for increased flexibility and heat dissipation or envelope construction for drives where pulsation, shock loads, high tension, and long centers are involved. HY-T Wedge Cogged belts are high-horsepower belt constructions that are identified with a 3VX and 5VX prefix and are available in lengths up to 200". The cogged construction provides the high flexibility required for short center distances. The cogs also provide a larger surface area to dissipate heat and prolong belt life. Im p roved material properties and advanced construction technology results in an average horsepower increase of 30% over standard Classical V-belt and wedge belts. HY-T Wedge Envelope belts are identified with a 3V, 5V, or 8V prefix and are recommended for drives where pulsation, shock loads, high tension, and long centers are involved. It features a continuous V-section that is protected by a wide angle, synthetic fabric impregnated with high-quality Goodyear engineered rubber compound. This unique envelope achieves the high strength HY-T Wedge belts need to withstand high loading forces. It also provides the torsional rigidity required in long center drives delivering the traction needed for accurate tracking and precision performance.

M AT C H M A K E R P E R F O R M A N C E
HY-T Wedge belts eliminate mismatch problems as each Matchmaker belt in a single length code is identical in size and performance to every other HY-T Wedge belt in that size, no matter when or where it was produced.

54

P O W E R

T R A N S M I S S I O N

P R O D U C T S

V - B E L T

2 0 0 6

H Y- T W E D G E

3VX

5VX

8VX

COGGED SIZES
Part Number 3VX250 3VX265 3VX280 3VX300 3VX315 3VX335 3VX355 Part Number 5VX450 5VX470 5VX490 5VX500 5VX510 5VX530 5VX540 5VX550 5VX560 5VX570 5VX580 Effective Length (in) 25.0 26.5 28.0 30.0 31.5 33.5 35.5 Effective Length (in) 45.0 47.0 49.0 50.0 51.0 53.0 54.0 55.0 56.0 57.0 58.0 Part Number 3VX375 3VX400 3VX425 3VX450 3VX475 3VX500 3VX530 Part Number 5VX590 5VX600 5VX610 5VX630 5VX650 5VX660 5VX670 5VX680 5VX690 5VX710 5VX730 Effective Length (in) 37.5 40.0 42.5 45.0 47.5 50.0 53.0 Effective Length (in) 59.0 60.0 61.0 63.0 65.0 66.0 67.0 68.0 69.0 71.0 73.0 Part Number 3VX560 3VX600 3VX630 3VX670 3VX710 3VX750 3VX800 Part Number 5VX740 5VX750 5VX780 5VX800 5VX810 5VX830 5VX840 5VX850 5VX860 5VX880 5VX900 Effective Length (in) 56.0 60.0 63.0 67.0 71.0 75.0 80.0 Effective Length (in) 74.0 75.0 78.0 80.0 81.0 83.0 84.0 85.0 86.0 88.0 90.0 Part Number 3VX850 3VX900 3VX950 3VX1000 3VX1060 3VX1120 3VX1180 Part Number 5VX930 5VX950 5VX960 5VX1000 5VX1030 5VX1060 5VX1080 5VX1120 5VX1150 5VX1180 5VX1230 Effective Length (in) 85.0 90.0 95.0 100.0 106.0 112.0 118.0 Effective Length (in) 93.0 95.0 96.0 100.0 103.0 106.0 109.0 112.0 115.0 119.0 123.0 Part Number 3VX1250 3VX1320 3VX1400 3VX1500 Effective Length (in) 125.0 132.0 140.0 150.0

Effective Part Number Length (in) 5VX1250 125.0 5VX1320 132.0 5VX1400 140.0 5VX1500 150.0 5VX1600 160.0 5VX1700 170.0 5VX1800 180.0 5VX1900 190.0 5VX2000 200.0

NONCOGGED SIZES
Part Number 3V250 3V265 3V280 3V300 3V315 3V335 3V355 Part Number 5V500 5V560 5V630 5V670 5V710 5V750 5V800 Part Number 8V1000 8V1060 8V1120 8V1180 8V1250 8V1320 Effective Length (in) 25.0 26.5 28.0 30.0 31.5 33.5 35.5 Effective Length (in) 50.0 56.0 63.0 67.0 71.0 75.0 80.0 Effective Length (in) 100.0 106.0 112.0 118.0 125.0 132.0 Part Number 3V375 3V400 3V425 3V450 3V475 3V500 3V530 Part Number 5V850 5V900 5V950 5V1000 5V1060 5V1120 5V1180 Part Number 8V1400 8V1500 8V1600 8V1700 8V1800 8V1900 Effective Length (in) 37.5 40.0 42.5 45.0 47.5 50.0 53.0 Effective Length (in) 85.0 90.0 95.0 100.0 106.0 112.0 118.0 Effective Length (in) 140.0 150.0 160.0 170.0 180.0 190.0 Part Number 3V560 3V600 3V630 3V670 3V710 3V750 3V800 Part Number 5V1250 5V1320 5V1400 5V1500 5V1600 5V1700 5V1800 Part Number 8V2000 8V2120 8V2240 8V2360 8V2500 8V2650 Effective Length (in) 56.0 60.0 63.0 67.0 71.0 75.0 80.0 Effective Length (in) 125.0 132.0 140.0 150.0 160.0 170.0 180.0 Effective Length (in) 200.0 212.0 224.0 236.0 250.0 265.0 Part Number 3V850 3V900 3V950 3V1000 3V1060 3V1120 3V1180 Part Number 5V1900 5V2000 5V2120 5V2240 5V2360 5V2500 5V2650 Part Number 8V2800 8V3000 8V3150 8V3350 8V3550 8V3750 Effective Length (in) 85.0 90.0 95.0 100.0 106.0 112.0 118.0 Effective Length (in) 190.0 200.0 212.0 224.0 236.0 250.0 265.0 Effective Length (in) 280.0 300.0 315.0 335.0 355.0 375.0 Part Number 3V1250 3V1320 3V1400 Effective Length (in) 125.0 132.0 140.0

Part Number 5V2800 5V3000 5V3150 5V3350 5V3550

Effective Length (in) 280.0 300.0 315.0 335.0 355.0

Part Number 8V4000 8V4250 8V4500 8V4750 8V5000 8V5600

Effective Length (in) 400.0 425.0 450.0 475.0 500.0 560.0

55

P O W E R

T R A N S M I S S I O N

P R O D U C T S

V - B E L T

NARROW
3V
2.20 2.35 2.50 2.65 2.80 3.00 3.15 3.35 Available Sizes Diameter (in) JA JA JA JA JA JA, SH JA, SH JA, SH 3.65 4.12 4.50 4.75 5.00 5.30 5.60 6.00

( U LT R A - V )

S H E AV E S

SH SH SH, SDS SH, SDS, SK SH, SDS, SK SH, SDS, SK SH, SDS, SK SH, SDS, SK

6.50 6.90 8.00 10.60 14.00 19.00 25.00 33.50

SH, SDS, SK SH, SDS, SK SDS, SK, SF SDS, SK, SF, E SK, SF, E SK, SF, E SF, E, F SF, E, F

5V
4.40 4.65 4.90 5.20 5.50 5.90 6.30 6.70 7.10 7.50 8.00

Available Sizes

Diameter (in) SH, SDS, SD SDS, SD SDS, SD SDS, SD SDS, SD SDS, SD, SK SK SK, SF SK, SF SK, SF SK, SF, E 8.50 9.00 9.25 9.75 10.30 10.90 11.30 11.80 12.50 13.20 14.20 SK, SF, E SK, SF, E, F SK, SF, E, F SK, SF, E, F SK, SF, E, F SK, SF, E, F SK, SF, E, F SK, SF, E, F SF, E, F, J SF, E, F, J SF, E, F, J 15.00 16.00 18.70 21.20 23.60 28.00 31.50 37.50 50.00 SF, E, F, J SF, E, F, J SF, E, F, J SF, E, F, J E, F, J, M E, F, J, M F, J, M F, J, M F, J, M

8V
12.50 13.20 14.00 15.00 16.00 17.00 18.00

Available Sizes

Diameter (in) F, J, M F, J, M F, J, M F, J, M F, J, M F, J, M F, J, M 19.00 20.00 21.20 22.40 24.80 30.00 35.50 F, J, M, N J, M, N J, M, N J, M, N M, N M, N, P M, N, P 40.00 44.50 53.00 63.00 71.00 M, N, P M, N, P M, N, P, W P, W P, W

56

Anda mungkin juga menyukai