Anda di halaman 1dari 101

sentron

3VL Molded Case Circuit-Breakers approved according to UL 489 up to 1600 A

CIRCUIT-BREAKERS

Catalog LV 1 Add-On October 2006

Related catalogs
Low-Voltage Controls and Distribution SIRIUS SENTRON SIVACON Order No. Catalog E86060-K1002-A101-A5-7600 Technical Information E86060-T1002-A101-A5-7600

Contents
Systems Controls: Contactors and contactor assemblies, solid-state switching devices Protection equipment Load feeders, motor starters and soft starters Monitoring and control devices Detecting devices Commanding and signaling devices Transformers Power supplies ALPHA FIX terminal blocks Planning and configuration with SIRIUS SIVACON busway and cubicle systems SENTRON switching and protection devices for power distribution: Air circuit-breakers, molded case circuit-breakers, switch disconnectors Planning, design and management with SIMARIS BETA modular installation devices

LV 1 LV 1 T

Industrial Communication Industrial Communication for Automation and Drives Order No.: E86060-K6710-A101-B5-7600 SICUBE System Cubicles and Cubicle Air-Conditioning Order No.: E86060-K1920-A101-A3-7600 SIDAC Reactors and Filters Order No.: E86060-K2803-A101-A3-7600

IK PI

PROFINET/Industrial Ethernet Industrial Mobile Communicaton PROFIBUS to IEC 61158/EN 50170 SIMATIC ET 200 distributed I/Os AS-Interface to EN 50295/IEC 61158 Remote operation with SINAUT Telecontrol Routers ECOFAST system

LV 50

System cubicles Cubicle modifications Cubicle expansion Accessories Special cubicles Cubicle solutions in practice Cubicle air-conditioning Special colors

LV 60

Commutating reactors for converters Mains reactors for frequency converters Iron-core output reactors Ferrite output reactors Iron-core smoothing reactors Smoothing air-core reactors Filter reactors Application-specific reactors Radio interference suppression filters dv/dt filters Sinewave filters

SIVACON 8PS Busway systems CD-K, BD01, BD2 up to 1250 A Order No.: E86060-K1870-A101-A2-7600 Automation & Drives The A&D Offline Mall CD-ROM: E86060-D4001-A110-C5-7600 DVD: E86060-D4001-A510-C5-7600 A&D Mall Internet: http://www.siemens.com/ automation/mall Catalog PDF Internet: http://www.automation. siemens.com/cd

LV 70

Busway systems, Overview CD-K system (25 A to 40 A) BD01 system (40 A to 160 A) BD2 system (160 A to 1250 A)

CA 01

All Automation and Drives products, including those in the catalogs listed above.

All Automation and Drives products, including those in the catalogs listed above.

All Catalogs of the Low-Voltage Controls available as downloadable PDF.

Registered trademarks
All product designations may be registered trademarks or product names of Siemens AG or other supplying companies. Third parties using these trademarks or product names for their own purposes may infringe upon the rights of the trademark owners. Further information about low-voltage controls is available on the Internet at: http://www.siemens.com/lowvoltage

Technical Assistance
Expert technical assistance for Low-voltage controls and electrical installation. Tel.: +49 (9 11) 8 95-59 00 Fax: +49 (9 11) 8 95-59 07 E-Mail: technicalassistance@siemens.com

Introduction

11

Supply
Power supplies

SENTRON 3VL Molded Case Circuit-Breakers approved according to UL 489 to 1600 A Catalog LV 1 Add-On 10/2006

Systems

12

Connecting with ALPHA


ALPHA FIX terminal blocks

Controls
Contactors and contactor assemblies

13

Engineering Software
Planning and configuration with SIRIUS

Invalid: Catalog LV 1 Add-On 04/2006 Contact your local Siemens representative for further information Siemens AG 2006

e
Protection equipment

n
Solid-state switching devices

14

Distributing with SIVACON


SIVACON power distribution boards, busway and cubicle systems

t u n F

Protecting

15

Switching and Protecting with SENTRON


Air circuit-breakers

Starting
Load feeders, motor starters and soft starters

16

Molded case circuit-breakers

The products and systems listed in this catalog are distributed/ manufactured using a certified quality management system which complies with EN ISO 9001 (Certificate Register Nos. can be found in the appendix). The certificates are recognized in all IQ Net countries.

Monitoring and Control


Monitoring and control devices

17

Switch disconnectors

Detection
Detecting devices

18

Engineering Software
Planning, design and management

Commanding and Signaling


Commanding and signaling devices

19

Protecting with BETA


BETA modular installation devices

10

Supply
Transformers

20

Appendix

Siemens LV 1 2006

0/1

Niederspannungs-Schalttechnik

Explanations

Delivery times (DT)


} A B C D X Preferred type 2 working days 1 week 3 weeks 6 week on request In exceptional cases, the actual delivery period may differ from that specified. Preferred types are available immediately from stock, i.e. are dispatched within 24 hours. Normal quantities of the products are usually delivred within the specified time following receipt of your order at our branch. The delivery periods apply up to the ramp at Siemens AG (products ready for dispatch). The transport times depend on the destination and type of shipping. The standard transport time for Germany is 1 day. The delivery times specified here represent the state of 10/2006. They are permanently optimized. Up-to-date information can be found at http://www.siemens.com/automation/mall.

Price units (PU)


The price unit defines the number of units, sets or meters to which the specified price and weight apply.

Packaging sizes (PS)


The packaging size defines the number, e.g. of units, sets or meters, for outer packaging. Only the quantity defined by the packaging size or a multiple thereof can be ordered! Multi-unit packaging and recyclable packaging, on request

Price groups (PG)


Each product is assigned to a price group.

Weight
The defined weight in kg refers to the price unit (PU).

Dimensions
All dimensions in mm.

Siemens LV 1 Add-On 10/2006

SENTRON Switching and Protection Devices Molded Case Circuit-Breakers

16
3VL Molded Case Circuit-Breakers approved according to UL 489 up to 1600 A Introduction - Overview General data - Benefits - Application 3-pole - Selection and ordering data Options - Selection and ordering data Accessories/spare parts - Selection and ordering data 3VL Molded Case Circuit-Breakers approved according to UL 489 up to 1600 A General data - Design - Function - Configuration - Technical specifications Project planning aids - Characteristic curves - Dimensional drawings - Schematics Siemens Contacts Worldwide Customer Support Metal Surcharges Conditions of Sale and Delivery Export Regulations

Catalog

16/2 16/4 16/5 16/6 16/17 16/19 Technical Information

16/42 16/49 16/52 16/53 16/57 16/57 16/88 Appendix 16/91 16/92 16/93

Siemens LV 1 Add-On 10/2006

3VL Molded Case Circuit-Breakers approved according to UL 489 up to 1600 A


Introduction

SENTRON Switching and Protection Devices Molded Case Circuit-Breakers

Overview

Type

VL150 UL, DG frame

VL250 UL, FG frame

VL400 UL, JG frame

3VL molded case circuit-breakers approved according to UL 489 up to 1600 A


Rated current In1) at 40 C ambient temperature Number of poles Rated operational voltage Ue (UL) AC 50/60 Hz DC2) Overcurrent trip unit Thermal-magnetic Solid-state LCD ETU Dimensions
N S E 0 _ 0 1 1 5 9

30 to 150 3

40 to 250 3 600 500 105 175 81 107

70 to 400 3 600 500 139 279 102 138

V V

600 500

A B

A B C D

mm mm mm mm

105 175 81 107

Switch-off capacities Standard switching capacity N Up to 240 V AC Up to 480 V AC Up to 600 V AC kA kA kA kA kA kA 65 35 18 30 18 -65 35 18 30 18 -65 35 25 30 25 --

16

Up to 250 V DC3) Up to 500 V DC3) Up to 600 V DC3) Switching capacity Icu/Ics RMS value according to IEC 60947-2 Up to 240 V AC Up to 415 V AC Up to 690 V AC Up to 250 V DC3) High switching capacity H Up to 240 V AC Up to 480 V AC Up to 600 V AC Up to 250 V DC3) Up to 500 V DC3) Up to 600 V DC3) Switching capacity Icu/Ics RMS value according to IEC 60947-2 Up to 240 V AC Up to 415 V AC Up to 690 V AC Up to 250 V DC3) Very high switching capacity L Up to 240 V AC Up to 480 V AC Up to 600 V AC Up to 250 V DC3) Up to 500 V DC3) Up to 600 V DC3) Switching capacity Icu/Ics RMS value according to IEC 60947-2 Up to 240 V AC Up to 415 V AC Up to 690 V AC Up to 250 V DC3) available -- Not available

kA kA kA kA kA kA kA kA kA kA

65/65 40/40 12/6 30/30 100 65 20 30 18 --

65/65 40/40 12/6 30/30 100 65 20 30 25 --

65/65 45/45 12/6 30/30 100 65 25 30 35 --

kA kA kA kA kA kA kA kA kA kA

100/75 70/70 12/6 30/30 200 100 25 30 18 --

100/75 70/70 12/6 30/30 200 100 25 30 30 --

100/75 70/70 15/8 30/30 200 100 25 30 35 --

kA kA kA kA

200/150 100/75 12/6 30/30

200/150 100/75 12/6 30/30

200/150 100/75 15/8 30/30

1) Rated value 80 % according to UL 489, 100 % according to IEC 60947-2.

16/2

Siemens LV 1 Add-On 10/2006

SENTRON Switching and Protection Devices Molded Case Circuit-Breakers


3VL Molded Case Circuit-Breakers approved according to UL 489 up to 1600 A
Introduction

VL400X UL, LG frame

VL800 UL, MG frame

VL1200 UL, NG frame

VL1600 UL, PG frame

3VL molded case circuit-breakers according to UL 489 up to 1600 A


150 to 600 3 600 500 139 279 102 138 200 to 800 3 600 500 190 406 118 151 300 to 1200 3 600 500 229 406 157 209 400 to 1600 3 600 500 229 406 157 209

65 35 25 30 25 --

65 35 25 22 35 --

65 35 25 22 35 --

65 35 25

65/65 45/45 12/6 30/30 100 65 25 30 35 --

65/65 50/50 20/10 30/30 100 65 35 25 50 --

65/35 50/25 20/10 30/30 100 65 35 25 50 --

65/35 50/25 20/10 30/30 100 65 35 25 50 --

100/75 70/70 15/8 30/30 200 100 25 30 35 --

100/75 70/70 30/15 30/30 200 100 50 42 65 --

100/50 70/35 30/15 30/30 200 100 65 42 65 --

100/50 70/35 30/15 30/30 200 100 65 42 65 --

200/150 100/75 15/8 30/30

200/150 100/75 35/17 30/30

200/100 100/50 35/17 30/30

200/100 100/50 35/17 30/30 3) The maximum permitted DC voltage for each conducting path needs to be taken into account for DC switching applications.

2) Rated DC voltage applies only to circuit-breakers with thermal-magnetic trip unit.

Siemens LV 1 Add-On 10/2006

16/3

16

22 35 --

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
General data

Benefits

The compact design of the SENTRON 3VL circuit-breakers coupled with excellent characteristics fulfills the high demands of today's electrical distribution systems. These circuit-breakers offer a broad product range, improved technology, space savings and easy operation. They are available both in thermal-magnetic (50 A to 1600 A) and in solid-state versions (30 A to 1600 A).

16
16/4

Siemens LV 1 Add-On 10/2006

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
General data

Application
The different versions of SENTRON 3VL UL circuit-breakers are suitable for the following applications: Incoming and outgoing circuit-breakers in distribution systems Switching and protection devices for motors (motor protection together with contactor and motor protection relay), transformers and capacitors Disconnector units with features for stopping and switching off in an emergency (main control switches and EMERGENCYSTOP switches) in conjunction with lockable rotary operating mechanisms. The SENTRON 3VL UL circuit-breakers are available in the following versions: 1. For system protection (in 3-pole versions) The overload and short-circuit releases are designed for the protection of cables, leads and non-motor loads. 2. For starter combinations (in 3-pole version) These circuit-breakers are used both for short-circuit protection as well as for isolating functions, which may be required in starter combinations consisting of circuit-breakers, overload relays and motor contactors. These circuit-breakers exclusively feature adjustable, instantaneous short-circuit releases. 3. As non-automatic air circuit-breakers (in 3-pole versions) These circuit-breakers can be used as feeder circuitbreakers, main control switches or disconnectors without overload protection. They incorporate an integrated shortcircuit self-protection system.

Standards and specifications SENTRON 3VL UL circuit-breakers comply with: UL 489, CSA (CSA - C22.2), IEC/EN 60947-2, isolating features according to IEC 60947-2, EN 60947-2, NOM (NMX-J-266-ANCE-2002) on request. Please contact Siemens for details of other standards. Operating conditions The SENTRON 3VL UL circuit-breakers are designed for operation in enclosed areas.

Siemens LV 1 Add-On 10/2006

16/5

16

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
3-pole

Selection and ordering data


Type Rated current In Set current of the inverse-time delayed overload trip unit "L" IR A Operational current DT of the instantaneous short-circuit trip unit "I" Ii A Icu up to 35 kA at 480 V, standard switching capacity N see "Overview". Order No. Order No. supplement required, see page 16/17 Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. kg

VL150 UL (DG frame) to VL1600 UL (PG frame) fixed-mounted circuit-breakers, thermal-magnetic overcurrent trip units System protection, TM, LI function
with permanently set thermal overload trip unit, adjustable short-circuit trip unit Connection type: Circuit-breakers without preassembled terminals, terminals must be ordered under "Accessories", "Plug-in versions/withdrawable versions", pages 16/25 to 16/29 and under "Accessories", "Connection parts for fixed-mounted circuit-breakers", pages 16/30 to 16/34. 3VL21 05-1KN30-.... 1 1 unit 113 2.200 50 450- 700 B 3VL21 06-1KN30-.... 1 1 unit 113 2.200 60 450- 700 B 3VL21 07-1KN30-.... 1 1 unit 113 2.200 70 450- 700 B 80 450- 800 B 3VL21 08-1KN30-.... 1 1 unit 113 2.200 3VL21 91-1KN30-.... 1 1 unit 113 2.200 90 500-1000 B 100 110 125 150 100 110 125 150 175 200 225 250 250 300 350 400 400 500 600 600 700 800 800 900 1000 1200 1200 1400 1600 500-1000 550-1100 625-1250 800-1600 625-1250 800-1600 800-1600 800-1600 1000-2000 1000-2000 1250-2500 1250-2500 1250-2500 1500-3000 1750-3500 2000-4000 2000-4000 2500-5000 2750-5500 3000-6000 3250-6500 3250-6500 4000-8000 6000-10000 6000-10000 7000-12000 7000-12000 7000-12000 7000-12000 B B B B B B B B B B B B B B B B B B B B B B B B B B B B B 3VL21 10-1KN30-.... 3VL21 11-1KN30-.... 3VL21 12-1KN30-.... 3VL21 15-1KN30-.... 3VL31 10-1KN30-.... 3VL31 11-1KN30-.... 3VL31 12-1KN30-.... 3VL31 15-1KN30-.... 3VL31 17-1KN30-.... 3VL31 20-1KN30-.... 3VL31 22-1KN30-.... 3VL31 25-1KN30-.... 3VL41 25-1KN30-.... 3VL41 30-1KN30-.... 3VL41 35-1KN30-.... 3VL41 40-1KN30-.... 3VL45 40-1KN30-.... 3VL45 50-1KN30-.... 3VL45 60-1KN30-.... 3VL61 60-1KN30-.... 3VL61 70-1KN30-.... 3VL61 80-1KN30-.... 3VL71 80-1KN30-.... 3VL71 90-1KN30-.... 3VL71 10-1KN30-.... 3VL71 12-1KN30-.... 3VL81 12-1KN30-.... 3VL81 14-1KN30-.... 3VL81 16-1KN30-.... 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 2.200 2.200 2.200 2.200 2.300 2.300 2.300 2.300 2.300 2.300 2.300 2.300 5.700 5.700 5.700 5.700 5.700 5.700 5.700 on req. on req. on req. on req. on req. on req. on req. on req. on req. on req.

VL150 UL, DG frame

50 60 70 80 90 100 110 125 150

VL250 UL, FG frame

100 110 125 150 175 200 225 250

VL400 UL, JG frame

250 300 350 400 400 500 600 600 700 800 800 900 1000 1200 1200 1400 1600

16

VL400X UL, LG frame

VL800 UL, MG frame

VL1200 UL, NG frame

VL1600 UL, PG frame

* You can order this quantity or a multiple thereof.

16/6

Siemens LV 1 Add-On 10/2006

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
3-pole

DT Icu up to 65 kA at 480 V, high switching capacity H Order No. Order No. supplement required, see page 16/17 Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. kg

DT

Icu up to 100 kA at 480 V, very high switching capacity L Order No. Order No. supplement required, see page 16/17 Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. kg

B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B

3VL21 05-2KN30-.... 3VL21 06-2KN30-.... 3VL21 07-2KN30-.... 3VL21 08-2KN30-.... 3VL21 91-2KN30-.... 3VL21 10-2KN30-.... 3VL21 11-2KN30-.... 3VL21 12-2KN30-.... 3VL21 15-2KN30-.... 3VL31 10-2KN30-.... 3VL31 11-2KN30-.... 3VL31 12-2KN30-.... 3VL31 15-2KN30-.... 3VL31 17-2KN30-.... 3VL31 20-2KN30-.... 3VL31 22-2KN30-.... 3VL31 25-2KN30-.... 3VL41 25-2KN30-.... 3VL41 30-2KN30-.... 3VL41 35-2KN30-.... 3VL41 40-2KN30-.... 3VL45 40-2KN30-.... 3VL45 50-2KN30-.... 3VL45 60-2KN30-.... 3VL61 60-2KN30-.... 3VL61 70-2KN30-.... 3VL61 80-2KN30-.... 3VL71 80-2KN30-.... 3VL71 90-2KN30-.... 3VL71 10-2KN30-.... 3VL71 12-2KN30-.... 3VL81 12-2KN30-.... 3VL81 14-2KN30-.... 3VL81 16-2KN30-....

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit

113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113

2.200 2.200 2.200 2.200 2.200 2.200 2.200 2.200 2.200 2.300 2.300 2.300 2.300 2.300

B B B B B B B B B

3VL21 05-3KN30-.... 3VL21 06-3KN30-.... 3VL21 07-3KN30-.... 3VL21 08-3KN30-.... 3VL21 91-3KN30-.... 3VL21 10-3KN30-.... 3VL21 11-3KN30-.... 3VL21 12-3KN30-.... 3VL21 15-3KN30-.... 3VL31 10-3KN30-.... 3VL31 11-3KN30-.... 3VL31 12-3KN30-.... 3VL31 15-3KN30-.... 3VL31 17-3KN30-.... 3VL31 20-3KN30-.... 3VL31 22-3KN30-.... 3VL31 25-3KN30-.... 3VL41 25-3KN30-.... 3VL41 30-3KN30-.... 3VL41 35-3KN30-.... 3VL41 40-3KN30-.... 3VL45 40-3KN30-.... 3VL45 50-3KN30-.... 3VL45 60-3KN30-.... 3VL61 60-3KN30-.... 3VL61 70-3KN30-.... 3VL61 80-3KN30-.... 3VL71 80-3KN30-.... 3VL71 90-3KN30-.... 3VL71 10-3KN30-.... 3VL71 12-3KN30-.... 3VL81 12-3KN30-.... 3VL81 14-3KN30-.... 3VL81 16-3KN30-....

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit

113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113

2.200 2.200 2.200 2.200 2.200 2.200 2.200 2.200 2.200 2.300 2.300 2.300 2.300 2.300 2.300 2.300 2.300 5.700 5.700 5.700 5.700 5.700 5.700 5.700 on req. on req. on req. on req. on req. on req. on req. on req. on req. on req.

B B B B B B 2.300 2.300 B 2.300 B 5.700 5.700 5.700 5.700 B B B B

5.700 B 5.700 B 5.700 B on req. B on req. B on req. B on req. on req. on req. on req. B B B B

on req. B on req. B on req. B

* You can order this quantity or a multiple thereof. Siemens LV 1 Add-On 10/2006

16/7

16

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
3-pole
Type Rated current In Operational current DT of the instantaneous short-circuit trip unit "I" Ii A Icu up to 35 kA at 480 V, standard switching capacity N see "Overview". Order No. Order No. supplement required, see page 16/17 Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. kg

VL150 UL (DG frame) to VL1600 UL (PG frame) fixed-mounted circuitbreakers, magnetic and solid-state overcurrent trip units Circuit-breakers for starter combination, I-function (motor circuit protector)
without overload trip unit, with adjustable short-circuit trip unit Connection type: Circuit-breakers without preassembled terminals, terminals must be ordered under "Accessories", "Plug-in versions/withdrawable versions", pages 16/25 to 16/29 and under "Accessories", "Connection parts for fixed-mounted circuit-breakers", pages 16/30 to 16/34. 150 150 150 250 250 250 400 400 600 600 800 1200 450- 900 750-1500 1250-2500 600-1200 1000-2000 1750-3500 1250-2500 2000-4000 2000-4000 2750-5500 3250-6500 7000-12000 -------------

NSE0_00707

VL150 UL, DG frame

VL250 UL, FG frame

VL400 UL, JG frame VL400X UL, LG frame VL800 UL, MG frame VL1200 UL, NG frame

Non-automatic molded case circuit-breakers


without overload release, with permanently set short-circuit releases (for intrinsic protection only) Connection type: Circuit-breakers without preassembled terminals, terminals must be ordered under "Accessories", "Plug-in versions/withdrawable versions", pages 16/25 to 16/29 and under "Accessories", "Connection parts for fixed-mounted circuit-breakers", pages 16/30 to 16/34. 2500 -3500 4400 5500 6500 12000 14000 -------

NSE0_00708

VL150 UL, DG frame VL250 UL, FG frame VL400 UL, JG frame

150 250 400 600 800 1200 1600

16

VL400X UL, LG frame VL800 UL, MG frame VL1200 UL, NG frame VL1600 UL,PG frame

* You can order this quantity or a multiple thereof.

16/8

Siemens LV 1 Add-On 10/2006

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
3-pole
DT Icu up to 65 kA at 480 V, high switching capacity H Order No. Order No. supplement required, see page 16/17 Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. kg DT Icu up to 100 kA at 480 V, very high switching capacity L Order No. Order No. supplement required, see page 16/17 Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. kg

B B B B B B B B B B B B

3VL21 15-2KJ30-.... 3VL21 15-2KK30-.... 3VL21 15-2KL30-.... 3VL31 25-2KJ30-.... 3VL31 25-2KK30-.... 3VL31 25-2KL30-.... 3VL41 40-2KJ30-.... 3VL41 40-2KK30-.... 3VL45 60-2KJ30-.... 3VL45 60-2KK30-.... 3VL61 80-2KK30-.... 3VL71 12-2KK30-....

1 1 1 1 1 1 1 1 1 1 1 1

1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit

113 113 113 113 113 113 113 113 113 113

2.200 2.200 2.200 2.300 2.300 2.300 5.700 5.700 5.700 5.700

-------------

113 on req. 113 on req.

B B B B B B B

3VL21 15-2KE30-.... 3VL31 25-2KE30-.... 3VL41 40-2KE30-.... 3VL45 60-2KE30-.... 3VL61 80-2KE30-.... 3VL71 12-2KE30-.... 3VL81 16-2KE30-....

1 1 1 1 1 1 1

1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit

113 113 113 113

2.200 B 2.300 B 5.700 B 5.700 B

3VL21 15-3KE30-.... 3VL31 25-3KE30-.... 3VL41 40-3KE30-.... 3VL45 60-3KE30-.... 3VL61 80-3KE30-.... 3VL71 12-3KE30-.... 3VL81 16-3KE30-....

1 1 1 1 1 1 1

1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit

113 113 113 113 113 113 113

2.200 2.300 5.700 5.700 15.700 23.500 29.800

113 15.700 B 113 23.500 B 113 29.800 B

* You can order this quantity or a multiple thereof. Siemens LV 1 Add-On 10/2006

16/9

16

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
3-pole
Type Rated Set current of current the inverseIn time delayed overload trip unit "L" IR A A Operating current of the instantaneous short-circuit trip unit "I" Ii A S function (short-time delayed shortcircuit trip unit) Isd DT Icu up to 35 kA at 480 V, standard switching capacity N see "Overview". Order No. Price Order No. supplement per PU required, see page 16/17 PU PS* (UNIT, SET, M) PG Weight per PU approx. kg

VL150 UL (DG frame) to VL1600 UL (PG frame) fixed-mounted circuitbreakers, solid-state overcurrent trip units System and generator protection
L S I
NSE0_00692

with solid-state overcurrent trip unit ETU (model 545) LSI function (tsd = 0 to 0.5 s) Connection type: Circuit-breakers without preassembled terminals, terminals must be ordered under "Accessories", "Plug-in versions/withdrawable versions", pages 16/25 to 16/29 and under "Accessories", "Connection parts for fixed-mounted circuit-breakers", pages 16/30 to 16/34. 30- 60 11 x In 1.5 - 10 x IR B 3VL21 06-1GE30-.... 1 1 unit 113 2.400 40- 100 11 x In 1.5 - 10 x IR B 3VL21 10-1GE30-.... 1 1 unit 113 2.400 1.5 - 10 x IR B 3VL21 15-1GE30-.... 1 1 unit 113 2.400 60- 150 11 x In 40- 100 60- 150 70- 250 70- 250 150- 400 150- 400 200- 600 200- 600 300- 800 300- 800 400-1000 400-1200 400-1200 700-1600 11 x In 11 x In 11 x In 11 x In 11 x In 11 x In 10 x In 10 x In 8 x In 11 x In 11 x In 10 x In 10 x In 6 x In 1.5 - 10 x IR 1.5 - 10 x IR 1.5 - 10 x IR 1.5 - 10 x IR 1.5 - 10 x IR 1.5 - 10 x IR 1.5 - 9 x IR 1.5 - 9 x IR 1.5 - 7 x IR 1.5 - 10 x IR 1.5 - 10 x IR 1.5 - 10 x IR 1.5 - 10 x IR 1.5 - 8 x IR B B B B B B B B B B B B B B 3VL31 10-1GE30-.... 3VL31 15-1GE30-.... 3VL31 25-1GE30-.... 3VL41 25-1GE30-.... 3VL41 40-1GE30-.... 3VL45 40-1GE30-.... 3VL45 60-1GE30-.... 3VL61 60-1GE30-.... 3VL61 80-1GE30-.... 3VL71 80-1GE30-.... 3VL71 10-1GE30-.... 3VL71 12-1GE30-.... 3VL81 12-1GE30-.... 3VL81 16-1GE30-.... 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 113 113 113 113 113 113 113 113 113 113 113 113 113 113 2.500 2.500 2.500 5.900 5.900 5.900 5.900 16.000 16.000 25.000 25.000 25.000 31.300 31.300

VL150 UL, DG frame

60 100 150 100 150 250 250 400 400 600 600 800 800 1000 1200 1200 1600

VL250 UL, FG frame

VL400 UL, JG frame VL400X UL, LG frame VL800 UL, MG frame VL1200 UL, NG frame

VL1600 UL, PG frame L = Overload

S = Short-circuit protection, short-time delayed I = Short-circuit protection, instantaneous

16

* You can order this quantity or a multiple thereof.

16/10

Siemens LV 1 Add-On 10/2006

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
3-pole
DT Icu up to 65 kA at 480 V, high switching capacity H Order No. Order No. supplement required, see page 16/17 Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. kg DT Icu up to 100 kA at 480 V, very high switching capacity L Order No. Order No. supplement required, see page 16/17 Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. kg

B B B B B B B B B B B B B B B B B

3VL21 06-2GE30-.... 3VL21 10-2GE30-.... 3VL21 15-2GE30-.... 3VL31 10-2GE30-.... 3VL31 15-2GE30-.... 3VL31 25-2GE30-.... 3VL41 25-2GE30-.... 3VL41 40-2GE30-.... 3VL45 40-2GE30-.... 3VL45 60-2GE30-.... 3VL61 60-2GE30-.... 3VL61 80-2GE30-.... 3VL71 80-2GE30-.... 3VL71 10-2GE30-.... 3VL71 12-2GE30-.... 3VL81 12-2GE30-.... 3VL81 16-2GE30-....

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit

113 113 113 113 113 113 113 113 113 113

2.400 B 2.400 B 2.400 B 2.500 B 2.500 B 2.500 B 5.900 B 5.900 B 5.900 B 5.900 B

3VL21 06-3GE30-.... 3VL21 10-3GE30-.... 3VL21 15-3GE30-.... 3VL31 10-3GE30-.... 3VL31 15-3GE30-.... 3VL31 25-3GE30-.... 3VL41 25-3GE30-.... 3VL41 40-3GE30-.... 3VL45 40-3GE30-.... 3VL45 60-3GE30-.... 3VL61 60-3GE30-.... 3VL61 80-3GE30-.... 3VL71 80-3GE30-.... 3VL71 10-3GE30-.... 3VL71 12-3GE30-.... 3VL81 12-3GE30-.... 3VL81 16-3GE30-....

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit

113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113

2.400 2.400 2.400 2.500 2.500 2.500 5.900 5.900 5.900 5.900 16.000 16.000 25.000 25.000 25.000 31.300 31.300

113 16.000 B 113 16.000 B 113 25.000 B 113 25.000 B 113 25.000 B 113 31.300 B 113 31.300 B

* You can order this quantity or a multiple thereof. Siemens LV 1 Add-On 10/2006

16/11

16

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
3-pole
Type Rated current In Set current of the inverse-time delayed overload trip unit "L" IR DT Icu up to 35 kA at 480 V, standard switching capacity N see "Overview". PU Price PS* (UNIT, Order No. supplement see page 16/16 SET, M) required, see page 16/17 Order No. PG Weight per PU approx. kg

VL150 UL (DG frame) to VL1600 UL (PG frame) fixed-mounted circuit-breakers, up to 1600 A, solid-state overcurrent trip units Circuit-breakers with solid-state overcurrent trip unit ETU
Connection type: Circuit-breakers without preassembled terminals, terminals must be ordered under "Accessories", "Plug-in versions/withdrawable versions", pages 16/25 to 16/29 and under "Accessories", "Connection parts for fixed-mounted circuit-breakers", pages 16/30 to 16/34. VL150 UL, 60 30- 60 B 3VL21 06-1@@30-.... DG frame VL250 UL, FG frame VL400 UL, JG frame VL400X UL, LG frame VL800 UL, MG frame VL1200 UL, NG frame VL1600 UL, PG frame 100 150 100 150 250 250 400 400 600 600 800 800 1000 1200 1200 1600 40- 100 60- 150 40- 100 60- 150 70- 250 70- 250 150- 400 150- 400 200- 600 200- 600 300- 800 300- 800 400-1000 400-1200 400-1200 700-1600 B B B B B B B B B B B B B B B B 3VL21 10-1@@30-.... 3VL21 15-1@@30-.... 3VL31 10-1@@30-.... 3VL31 15-1@@30-.... 3VL31 25-1@@30-.... 3VL41 25-1@@30-.... 3VL41 40-1@@30-.... 3VL45 40-1@@30-.... 3VL45 60-1@@30-.... 3VL61 60-1@@30-.... 3VL61 80-1@@30-.... 3VL71 80-1@@30-.... 3VL71 10-1@@30-.... 3VL71 12-1@@30-.... 3VL81 12-1@@30-.... 3VL81 16-1@@30-.... Order No. supplements GB

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit

113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113

2.400 2.400 2.400 2.500 2.500 2.500 5.900 5.900 9.300 9.300 16.000 16.000 25.000 25.000 25.000 31.300 31.300

ETU trip units, 3-pole versions

16

System protection with LI function

I
NSE0_00943

System protection with LIG function for 4-wire three-phase systems1)


L G I
NSE0_00693

GD

L S I
NSE0_00692

System and generator protection with LSI function

GE

L S G I
NSE0_00694

System and generator protection with LSIG function for 4-wire three-phase systems1)

GH

L = Overload S = Short-circuit protection, short-time delayed I = Short-circuit protection, instantaneous G = Ground-fault protection
1)

Vectorial summation current formation of the currents.

* You can order this quantity or a multiple thereof.

16/12

Siemens LV 1 Add-On 10/2006

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
3-pole
DT Icu up to 65 kA at 480 V, high switching capacity H Order No. Order No. supplement required, see page 16/17 PU Price PS* (UNIT, see page 16/16 SET, M) PG Weight per PU approx. kg DT Icu up to 100 kA at 480 V, very high switching capacity L Order No. Order No. supplement required, see page 16/17 PU Price PS* (UNIT, see page 16/16 SET, M) PG Weight per PU approx. kg

B B B B B B B B B B B B B B B B B

3VL21 06-2@@30-.... 3VL21 10-2@@30-.... 3VL21 15-2@@30-.... 3VL31 10-2@@30-.... 3VL31 15-2@@30-.... 3VL31 25-2@@30-.... 3VL41 25-2@@30-.... 3VL41 40-2@@30-.... 3VL45 40-2@@30-.... 3VL45 60-2@@30-.... 3VL61 60-2@@30-.... 3VL61 80-2@@30-.... 3VL71 80-2@@30-.... 3VL71 10-2@@30-.... 3VL71 12-2@@30-.... 3VL81 12-2@@30-.... 3VL81 16-2@@30-.... Order No. supplements GB

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit

113 113 113 113 113 113 113 113 113 113

2.400 2.400 2.400 2.500 2.500 2.500 5.900 5.900 9.300 9.300

B B B B B B B B B B B B B B B B B

3VL21 06-3@@30-.... 3VL21 10-3@@30-.... 3VL21 15-3@@30-.... 3VL31 10-3@@30-.... 3VL31 15-3@@30-.... 3VL31 25-3@@30-.... 3VL41 25-3@@30-.... 3VL41 40-3@@30-.... 3VL45 40-3@@30-.... 3VL45 60-3@@30-.... 3VL61 60-3@@30-.... 3VL61 80-3@@30-.... 3VL71 80-3@@30-.... 3VL71 10-3@@30-.... 3VL71 12-3@@30-.... 3VL81 12-3@@30-.... 3VL81 16-3@@30-.... Order No. supplements GB

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit

113 113 113 113 113 113 113 113 113 113

2.400 2.400 2.400 2.500 2.500 2.500 5.900 5.900 9.300 9.300

113 16.000 113 16.000 113 25.000 113 25.000 113 25.000 113 31.300 113 31.300

113 16.000 113 16.000 113 25.000 113 25.000 113 25.000 113 31.300 113 31.300

GD

GD

GE

GE

GH

GH

* You can order this quantity or a multiple thereof. Siemens LV 1 Add-On 10/2006

16/13

16

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
3-pole
Type Rated current In Set current of the inverse-time delayed overload trip unit "L" IR DT Icu up to 35 kA at 480 V, standard switching capacity N see "Overview". Order No. Order No. supplement required, see page 16/17 A A PU Price PS* (UNIT, see page 16/16 SET, M) PG Weight per PU approx. kg

VL150 UL (DG frame) to VL1600 UL (PG frame) fixed-mounted circuit-breakers, up to 1600 A, solid-state overcurrent trip units Circuit-breakers with solid-state overcurrent trip unit ETU
Connection type: Circuit-breakers without preassembled terminals, terminals must be ordered under "Accessories", "Plug-in versions/withdrawable versions", pages 16/25 to 16/29 and under "Accessories", "Connection parts for fixed-mounted circuit-breakers", pages 16/30 to 16/34. VL150 UL, 60 30- 60 B 3VL21 06-1@@30-.... DG frame VL250 UL, FG frame VL400 UL, JG frame VL400X UL, LG frame VL800 UL, MG frame VL1200 UL, NG frame VL1600 UL, PG frame 100 150 100 150 250 250 400 400 600 600 800 800 1000 1200 1200 1600 40- 100 60- 150 40- 100 60- 150 70- 250 70- 250 150- 400 150- 400 200- 600 200- 600 300- 800 300- 800 400-1000 400-1200 400-1200 700-1600 B B B B B B B B B B B B B B B B 3VL21 10-1@@30-.... 3VL21 15-1@@30-.... 3VL31 10-1@@30-.... 3VL31 15-1@@30-.... 3VL31 25-1@@30-.... 3VL41 25-1@@30-.... 3VL41 40-1@@30-.... 3VL45 40-1@@30-.... 3VL45 60-1@@30-.... 3VL61 60-1@@30-.... 3VL61 80-1@@30-.... 3VL71 80-1@@30-.... 3VL71 10-1@@30-.... 3VL71 12-1@@30-.... 3VL81 12-1@@30-.... 3VL81 16-1@@30-.... Order No. supplements

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit

113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113

2.400 2.400 2.400 2.500 2.500 2.500 5.900 5.900 9.300 9.300 16.000 16.000 25.000 25.000 25.000 31.300 31.300

16

LCD ETU trip unit, 3-pole version


L S I
NSE0_00696

System protection with LI/LS/LSI function

JH

System protection with LSIG function


L S G I
NSE0_00697

for 4-wire three-phase systems1)2)

JM

L = Overload S = Short-circuit protection, short-time delayed I = Short-circuit protection, instantaneous G = Ground-fault protection

1) 2)

External current transformer required in addition (on request). Vectorial summation current formation of the currents.

* You can order this quantity or a multiple thereof.

16/14

Siemens LV 1 Add-On 10/2006

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
3-pole
.

DT Icu up to 65 kA at 480 V, high switching capacity H Order No. Order No. supplement required, see page 16/17 PU Price PS* (UNIT, see page 16/16 SET, M) PG Weight per PU approx. kg

DT Icu up to 100 kA at 480 V, very high switching capacity L Order No. Order No. supplement required, see page 16/17 PU Price PS* (UNIT, see page 16/16 SET, M) PG Weight per PU approx. kg

B B B B B B B B B B B B B B B B B

3VL21 06-2@@30-.... 3VL21 10-2@@30-.... 3VL21 15-2@@30-.... 3VL31 10-2@@30-.... 3VL31 15-2@@30-.... 3VL31 25-2@@30-.... 3VL41 25-2@@30-.... 3VL41 40-2@@30-.... 3VL45 40-2@@30-.... 3VL45 60-2@@30-.... 3VL61 60-2@@30-.... 3VL61 80-2@@30-.... 3VL71 80-2@@30-.... 3VL71 10-2@@30-.... 3VL71 12-2@@30-.... 3VL81 12-2@@30-.... 3VL81 16-2@@30-.... Order No. supplements

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit

113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113

2.400 2.400 2.400 2.500 2.500 2.500 5.900 5.900 9.300 9.300 16.000 16.000 25.000 25.000 25.000 31.300 31.300

B B B B B B B B B B B B B B B B B

3VL21 06-3@@30-.... 3VL21 10-3@@30-.... 3VL21 15-3@@30-.... 3VL31 10-3@@30-.... 3VL31 15-3@@30-.... 3VL31 25-3@@30-.... 3VL41 25-3@@30-.... 3VL41 40-3@@30-.... 3VL45 40-3@@30-.... 3VL45 60-3@@30-.... 3VL61 60-3@@30-.... 3VL61 80-3@@30-.... 3VL71 80-3@@30-.... 3VL71 10-3@@30-.... 3VL71 12-3@@30-.... 3VL81 12-3@@30-.... 3VL81 16-3@@30-.... Order No. supplements

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit

113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113

2.400 2.400 2.400 2.500 2.500 2.500 5.900 5.900 9.300 9.300 16.000 16.000 25.000 25.000 25.000 31.300 31.300

JH

JH

JM

JM

* You can order this quantity or a multiple thereof. Siemens LV 1 Add-On 10/2006

16/15

16

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
3-pole
Order No. supplement Type (for complete Order No., VL150 UL see pages 16/12 to 16/15) (DG frame) 3VL. ..-. @@3.-.... Rated current In 60 A Price GB 100 A 150 A

VL250 UL (FG frame) 100 A 150 A 250 A

VL400 UL (JG frame) 250 A 400 A

VL400X UL (LG frame) 400 A 600 A

VL800 UL (MG frame) 600 A 800 A

GD

GE

GH

JH

JM

Order No. supplement (for complete Order No., see pages 16/12 to 16/15) 3VL. ..-. @@3.-....

VL1200 UL (NG frame) 800 A Price 1000 A 1200 A

VL1600 UL (PG frame) 1200 A 1600 A

16

GB

GD

GE

GH

JH

JM

Standard switching capacity N High switching capacity H Very high switching capacity L

16/16

Siemens LV 1 Add-On 10/2006

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Options

Selection and ordering data


1. Order No. supplement: Undervoltage or shunt trip unit, wiring directly to accessories Rated control supply voltage Us/frequency AC 50/60 Hz DC Order No. supplement 3VL . . . . - . . . . . -@@. . Circuit-breakers Type VL150 UL (DG frame) to VL400X UL (LG frame)1) Additional price Without auxiliary trip units With undervoltage trip units Only right pole V AC ------245) 110-127 220-250 208 277 380-415 440-480 500-525 6005) V DC 12 24 48 60 110-127 220-250 ---------2N 2P 2U 2V 2R 2S 2D 2G 2H 2M 2Q 2J 2K 2L 2T
1) 1) 1) 1) 1) 1) 1) 1) 1) 1) 1) 1) 1) 1) 1)

VL800 UL (MG frame) to VL1600 UL (PG frame) Additional price without

0A

without

With shunt trip units Only right pole V AC 24 ---48-60 110-127 208-277 380-600 V DC 24 48-60 110-127 220-250 ----8C 8J 8K 8Q 8M 8R 8T 8V
1) 1) 1) 1) 1) 1) 1) 1)

2. Order No. supplement: Auxiliary switches (HS) and alarm switches (AS), left/right pole, directly wired to accessories Equipment HS = 1 NO or 1 NC switch block AS = 1 NO switch block without auxiliary/alarm switches 2 HS (1 NO/1 NC)3) 4 HS (2 NO/2 NC) 2 HS (1 NO/1 NC) + 1 AS (1 NO) 2 HS (1 NO/1 NC) + 1 AS (1 NO)4) -- Not available
1)

Order No. supplement 3VL . . . . - . . . . . -. . @@ A0 B1 C1 D1 E1

Circuit-breakers Type VL150 UL (DG frame) to VL400X UL (LG frame) Additional price without
2)

VL800 UL (MG frame) to VL1600 UL (PG frame) Additional price without ---

---

2)

For SENTRON VL150 UL (DG frame)/VL250 UL (FG frame) circuit-breakers with solid-state overcurrent trip units, the only option is one undervoltage trip unit or shunt trip unit, or one auxiliary/alarm switch combination. Except for mounting in the left accessory sub-section of the SENTRON VL150 UL (DG frame)/VL250 UL (FG frame) circuit-breakers with electronic overcurrent trip units, since this sub-section is occupied by the tripping solenoid. Only one auxiliary trip unit or one auxiliary/alarm switch combination can be installed on the right-hand side. With mounting adapter up to 3 HS. With mounting adapter up to 2 HS +2 AS. On request.

2)

3) 4) 5)

Siemens LV 1 Add-On 10/2006

16/17

16

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Options
When ordering, add "-Z" to the complete Order No. and add the relevant order code(s). Order code Order No. with "Z"
1234 5 6 7 8 9 10 11 12 13 14 15 16

Additional price

3VL . . . . . . . . . . . . . Z and additional order code(s) @@@ + . . . + . . .

Code for further versions

For fixed-mounted circuit-breakers (wired in factory)


VL150 UL (DG frame) Wiring for internal accessories (auxiliary switches, alarm switches, auxiliary to VL1600 UL (PG frame) trip units not included in scope of supply) with connecting cables (2 m long) brought out at the rear VL150 UL (DG frame) Wiring for motorized operating to VL1600 UL (PG frame) mechanism (Motorized operating mechanism not included in the scope of supply, to order see pages 16/22 to 16/24) with connection cables (2 m long), brought out at the top on VL150 UL (DG frame) to VL400X UL (LG frame) or brought out at the right-hand side on VL800 UL (MG frame) to VL1600 UL (PG frame) Motorized operating mechanism (24 V DC) mounted on the circuit-breaker (motorized operating mechanism included in scope of supply) with wiring for internal accessories of the circuit-breaker with connecting cables (2 m long) brought out at the rear, (auxiliary switches, alarm switches, auxiliary trip units not included in scope of supply) Motorized operating mechanism (42-48 V AC/DC) mounted on the circuit-breaker (motorized operating mechanism included in scope of supply) with wiring for internal accessories of the circuit-breaker with connecting cables (2 m long) brought out at the rear, (auxiliary switches, alarm switches, auxiliary trip units not included in scope of supply) Motorized operating mechanism (60 V AC/DC) mounted on the circuit-breaker (motorized operating mechanism included in scope of supply) with wiring for internal accessories of the circuit-breaker with connecting cables (2 m long) brought out at the rear, (auxiliary switches, alarm switches, auxiliary trip units not included in scope of supply) Motorized operating mechanism (110-127 V AC/DC) mounted on the circuit-breaker (motorized operating mechanism included in scope of supply) with wiring for internal accessories of the circuit-breaker with connecting cables (2 m long) brought out at the rear, (auxiliary switches, alarm switches, auxiliary trip units not included in scope of supply) Motorized operating mechanism (220-250 V AC/DC) mounted on the circuit-breaker (motorized operating mechanism included in scope of supply) with wiring for internal accessories of the circuit-breaker with connecting cables (2 m long) brought out at the rear, (auxiliary switches, alarm switches, auxiliary trip units not included in scope of supply) VL150 UL (DG frame) to VL250 UL (FG frame) VL400 UL (JG frame) to VL400X UL (LG frame) VL800 UL (MG frame) VL1200 UL (NG frame) to VL1600 UL (PG frame)

@@@

@@@

@@@

VL150 UL (DG frame) to VL250 UL (FG frame) VL400 UL (JG frame) to VL400X UL (LG frame) VL800 UL (MG frame) VL1200 UL (NG frame) to VL1600 UL (PG frame)

@@@

16

VL150 UL (DG frame) to VL250 UL (FG frame) VL400 UL (JG frame) to VL400X UL (LG frame) VL800 UL (MG frame) VL1200 UL (NG frame) to VL1600 UL (PG frame)

@@@

VL150 UL (DG frame) to VL250 UL (FG frame) VL400 UL (JG frame) to VL400X UL (LG frame) VL800 UL (MG frame) VL1200 UL (NG frame) to VL1600 UL (PG frame)

@@@

VL150 UL (DG frame) to VL250 UL (FG frame) VL400 UL (JG frame) to VL400X UL (LG frame) VL800 UL (MG frame) VL1200 UL (NG frame) to VL1600 UL (PG frame)

@@@

16/18

Siemens LV 1 Add-On 10/2006

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Accessories/spare parts

Selection and ordering data


Wiring directly at accessories DT For VL150 UL (DG frame) to VL400X UL (LG frame) Order No. Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. kg

Auxiliary switches and auxiliary trip units 3-pole


Auxiliary switches (HS) and alarm switches (AS) for subsequent fitting Kits 2 HS (1 NO + 1 NC) 4 HS (2 NO + 2 NC) 2 HS (1 NC + 1 NO)
NSE0_00684

Mounting side N, left1), right N, left, right Left, right3) Left B B 3VL9 400-2AB01 -3VL9 400-2AD01 -see page 16/21. 1 1 unit 113 0.051 1 1 unit 113 0.027

+ 1 AS (1 NO) (kit) Shunt trip units 2) for subsequent fitting V AC 24 ---48-60 110-127 208-277 380-600 V DC 24 48-60 110-127 220-250 -----

Additional auxiliary switch/alarm switch combinations 3VL9 400-2A.01

Mounting side right pole only right pole only right pole only right pole only right pole only right pole only right pole only right pole only B B B B B B B B 3VL9 400-1SC01 3VL9 400-1SJ01 3VL9 400-1SK01 3VL9 400-1SQ01 3VL9 400-1SM01 3VL9 400-1SR01 3VL9 400-1ST01 3VL9 400-1SV01 1 1 1 1 1 1 1 1 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 113 113 113 113 113 113 113 113 0.075 0.075 0.075 0.075 0.075 0.075 0.075 0.075

Undervoltage trip unit for subsequent fitting


NSE0_00678

V AC ----244) 110-127 -208 220-250 -277 380-415 440-480 500-525 6004)

V DC 12 24 48 60 --110-127 --220-250 ------

Mounting side right pole only right pole only right pole only right pole only right pole only right pole only right pole only right pole only right pole only right pole only right pole only right pole only right pole only right pole only right pole only B B B B B B B B B B B B B B B 3VL9 400-1UN01 3VL9 400-1UP01 3VL9 400-1UU01 3VL9 400-1UV01 3VL9 400-1UD01 3VL9 400-1UG01 3VL9 400-1UR01 3VL9 400-1UM01 3VL9 400-1UH01 3VL9 400-1US01 3VL9 400-1UQ01 3VL9 400-1UJ01 3VL9 400-1UK01 3VL9 400-1UL01 3VL9 400-1UT01 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 0.075 0.075 0.075 0.075 0.075 0,075 0.075 0.075 0.075 0.075 0.075 0.075 0.075 0.075 0.075

3VL9 400-1S.01, 3VL9 400 1U.01

1)

Except for mounting in the left accessory sub-section of the SENTRON VL150 UL (DG frame)/VL250 UL (FG frame) circuit-breakers with solid-state overcurrent trip units, since this sub-section is occupied by the tripping solenoid. Shunt trip unit with disconnection contact (3SB3 for ON/OFF position) not isolated (see "Schematics"). For VL400 UL (JG frame)/VL400X UL (LG frame): Unsuitable for mounting in the right-hand accessory sub-section. The 3VL9 400-2AB01 installation kit with auxiliary switches only is recommended. On request

2) 3)

4)

* You can order this quantity or a multiple thereof. Siemens LV 1 Add-On 10/2006

16/19

16

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Accessories/spare parts
Wiring directly at accessories DT For VL800 UL (MG frame) to VL1600 UL (PG frame) Order No. Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. kg

Auxiliary switches and auxiliary trip units 3-pole


Auxiliary switches (HS) and alarm switches (AS) for subsequent fitting Kits 2 HS (1 NO + 1 NC) 4 HS (2 NO + 2 NC) 2 HS (1 NC + 1 NO)
NSE0_00684

Mounting side N, left, right N, left, right Left, right Left B B -3VL9 800-2AC01 -3VL9 800-2AE01 see page 16/21. 1 1 unit 113 0.060 1 1 unit 113 0.058

+ 1 AS (1 NO) (kit) Shunt trip units1) for subsequent fitting V AC 24 ---48-60 110-127 208-277 380-600 V DC 24 48-60 110-127 220-250 -----

3VL9 800-2A.01

Additional auxiliary switch/alarm switch combinations

Mounting side Right pole only Right pole only Right pole only Right pole only Right pole only Right pole only Right pole only Right pole only A A A A A A A A 3VL9 800-1SC01 3VL9 800-1SJ01 3VL9 800-1SK01 3VL9 800-1SQ01 3VL9 800-1SM01 3VL9 800-1SR01 3VL9 800-1ST01 3VL9 800-1SV01 1 1 1 1 1 1 1 1 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 113 113 113 113 113 113 113 113 0.175 0.140 0.177 0.163 0.162 0.160 0.170 0.181

Undervoltage trip unit for subsequent fitting


NSE0_00678

V AC ----242) 110-127 -208 220-250 -277 380-415 440-480 500-525 600

V DC 12 24 48 60 --110-127 --220-250 ------

Mounting side Right pole only Right pole only Right pole only Right pole only Right pole only Right pole only Right pole only Right pole only Right pole only Right pole only Right pole only Right pole only Right pole only Right pole only Right pole only A A B B B B B B B B B B B 3VL9 800-1UN01 3VL9 800-1UP01 3VL9 800-1UU01 3VL9 800-1UV01 3VL9 800-1UD01 3VL9 800-1UG01 3VL9 800-1UR01 3VL9 800-1UM01 3VL9 800-1UH01 3VL9 800-1US01 3VL9 800-1UQ01 3VL9 800-1UJ01 3VL9 800-1UK01 --1 1 1 1 1 1 1 1 1 1 1 1 1 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 113 113 113 113 113 113 113 113 113 113 113 113 113 0.127 0.136 0.125 0.146 0.088 0.088 0.127 0.136 0.137 0.135 0.138 0.131 0.132

16

3VL9 800-1S.01, 3VL9 800-1U.01

1) 2)

Shunt trip unit with disconnection contact (3SB3 for ON/OFF position) not isolated (see "Schematics"). On request.

* You can order this quantity or a multiple thereof.

16/20

Siemens LV 1 Add-On 10/2006

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Accessories/spare parts
For circuitbreakers Maximum combination of auxiliary switches (HS) and alarm switches (AS) DT Order No. Price per PU PU (UNIT, SET, M) PS* PG Weight per PU approx. kg

Type

3SB adapters and 3SB switching elements Mounting adapters for auxiliary and alarm switch combinations
For installation in the left pole of the circuit-breaker VL150 UL (DG frame), up to 3 HS1) VL250 UL (FG frame), VL400 UL (JG frame), 2 HS + 1 AS1) 2) VL400X UL (LG frame) VL800 UL (MG frame), VL1200 UL (NG frame), VL1600 UL (PG frame) up to 4 HS 2 HS + 2 AS B B B B B B B 3VL9 400-2AH01 3VL9 400-2AJ11 3VL9 816-2AL01 3VL9 816-2AN11 3VL9 400-2AH01 3VL9 400-2AJ21 3VL9 816-2AL01 -2)

1 1 1 1 1 1 1

1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit

113 113 113 113 113 113 113

0.009 0.001 0.075 0.072 0.009 0.001 0.075

For fitting in the right pole of the circuit-breaker VL150 UL (DG frame), up to 3 HS1) VL250 UL (FG frame), VL400 UL (JG frame), 2 HS + 1 AS1) 2) VL400X UL (LG frame)2) VL800 UL (MG frame), VL1200 UL (NG frame), VL1600 UL (PG frame)
1)

up to 4 HS 2 HS + 2 AS

Except for mounting in the left accessory sub-section of the SENTRON VL150 UL (DG frame)/VL250 UL (FG frame) with solid-state overcurrent trip unit. Only one auxiliary trip unit or one auxiliary/alarm switch combination can be installed on the right-hand side.

For VL400 UL (JG frame)/VL400X UL (LG frame): 3VL9 400-2AJ21 unsuitable for mounting in the right-hand accessory sub-section.

For auxiliary/alarm switches

DT

Circuit-breaker Type VL150 UL (DG frame) to VL1600 UL (PG frame) Order No. Price per PU

PU (UNIT, SET, M)

PS*

PG

Weight per PU approx.

kg 1 1 1 unit 1 unit 102 102 0.010 0.010

1 NO 1 NC

B B

3SB34 00-0J 3SB34 00-0K

For auxiliary switch or alarm switch combinations not included in the kits provided as standard, the mounting adapters specified can be ordered separately together with the required switching elements: 1 HS or 1 AS with NO contact 3SB34 00-0J 1 HS or 1 AS with NC contact 3SB34 00-0K

Note: A maximum of 6 switch blocks (HS) are possible for each (VL150 UL (DG frame) to VL400X UL (LG frame)) circuit-breaker and a maximum of 8 switch blocks (HS) are possible for each (VL800 UL (MG frame) to VL1600 UL (PG frame) circuitbreaker). Four 3SB3 auxiliary switching elements and one mounting adapter (right), suitable for VL800 UL (MG frame) to VL1600 UL (PG frame) circuit-breakers.

NSE0_00684

For retrofitting/for possible complements, see "Design", "Auxiliary Trip Units and Auxiliary Switches".

* You can order this quantity or a multiple thereof. Siemens LV 1 Add-On 10/2006

16/21

16

Switch blocks for auxiliary and alarm switch combinations

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Accessories/spare parts
Version DT For VL150 UL (DG frame) to VL250 UL (FG frame) Order No. Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. kg

Operating mechanisms 3-pole


NSE0_00679

Front-operated rotary operating mechanisms For direct mounting on the circuit-breaker, without leading auxiliary switch Degree of protection IP301), black B EMERGENCY-STOP version Red knob, yellow indicator plate Safety locks for installation by the customer, see pages 16/36 to 16/39. Door-coupling rotary operating mechanisms, complete, installation in doors and covers Degree of protection IP65, including black knob with masking plate, indicator plate, removable door coupling, 300 mm extension shaft and front-operated rotary operating mechanism for the respective circuit-breaker B EMERGENCY-STOP version, Red knob, yellow indicator plate, without leading auxiliary switch Safety locks for installation by the customer, see pages 16/36 to 16/39. Leading auxiliary switches for installation in a front-operated rotary operating mechanism or door-coupling rotary operating mechanism Standard or EMERGENCY-STOP version "OFF after ON" Leading auxiliary switches when switching on 1 changeover contact with 1.5 m long cables 2 changeover contacts with 1.5 m long cables B B B

3VL9 300-3HA01 3VL9 300-3HC01

1 1

1 unit 1 unit

113 113

0.362 0.362

3VL9 .00-3H.01

NSE0_00711

3VL9 300-3HF01

1 unit

113

0.620

3VL9 .00-3H.01

3VL9 300-3HG01

1 unit

113

0.620

3VL9 .00-3A.11

NSE0_00712

3VL9 300-3AS11 3VL9 300-3AT11

1 1

1 unit 1 unit

113 113

0.080 0.130

16

"ON after OFF" Leading auxiliary switches when switching off 1 changeover contact with 1.5 m long cables 2 changeover contacts with 1.5 m long cables Motorized operating mechanisms with spring energy store2) Degree of protection IP30, with locking device for 3 padlocks, suitable for synchronizing
NSE0_00716

B B

3VL9 300-3AU11 3VL9 300-3AW11

1 1

1 unit 1 unit

113 113

0.080 0.130

50/60 Hz V AC -42-48 60 110-127 220-250

V DC 24 42-48 60 110-127 220-250 B B B B B 3VL9 300-3MJ01 3VL9 300-3ML01 3VL9 300-3MS01 3VL9 300-3MN01 3VL9 300-3MQ01 -1 1 1 1 1 1 unit 1 unit 1 unit 1 unit 1 unit 113 113 113 113 113 2.140 0.001 2.140 2.140 2.140

3VL9 .00-3M.01 Toggle handle extensions Max Flex operating mechanisms, complete with operating mechanism, lever and Bowden wire Degree of protection NEMA 1, 3R, 12 Bowden cable length 0.9 m Bowden cable length 1.2 m B 3VL9 300-3JM01 -1 1 unit 113 0.001

NSE0_01860

3VL9 .00-3JM01
1) 2)

IP40 with additional masking frame mounted on the door cut-out. For safety lock as an installation kit for retrofitting, see pages 16/36 to 16/39.

* You can order this quantity or a multiple thereof.

16/22

Siemens LV 1 Add-On 10/2006

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Accessories/spare parts
For VL400 UL (JG frame) to VL400X UL (LG frame) DT Order No. Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. kg For VL800 UL (MG frame) DT Order No. Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. kg

B B

3VL9 400-3HA01 3VL9 400-3HC01

1 1

1 unit 1 unit

113 113

0.725 B 0.725 B

3VL9 600-3HA01 3VL9 600-3HC01

1 1

1 unit 1 unit

113 113

0.834 0.834

3VL9 400-3HF01

1 unit

113

0.630 B

3VL9 600-3HF01

1 unit

113

1.837

3VL9 400-3HG01

1 unit

113

0.630 B

3VL9 600-3HG01

1 unit

113

1.837

B B

3VL9 400-3AS11 3VL9 400-3AT11

1 1

1 unit 1 unit

113 113

0.080 B 0.130 B

3VL9 600-3AS11 3VL9 600-3AT11

1 1

1 unit 1 unit

113 113

0.080 0.130

B B

3VL9 400-3AU11 3VL9 400-3AW11

1 1

1 unit 1 unit

113 113

0.080 B 0.130 B

3VL9 600-3AU11 3VL9 600-3AW11

1 1

1 unit 1 unit

113 113

0.080 0.130

B B B B B B

3VL9 400-3MJ01 3VL9 400-3ML01 3VL9 400-3MS01 3VL9 400-3MN01 3VL9 400-3MQ01 3VL9 400-3HN01

1 1 1 1 1 1

1 unit 1 unit 1 unit 1 unit 1 unit 1 unit

113 113 113 113 113 113

3.910 3.910 3.910 3.910 3.910

B B B B B

3VL9 600-3MJ01 3VL9 600-3ML01 3VL9 600-3MS01 3VL9 600-3MN01 3VL9 600-3MQ01 3VL9 600-3HN01

1 1 1 1 1 1

1 unit 1 unit 1 unit 1 unit 1 unit 1 unit

113 113 113 113 113 113

4.800 4.800 4.800 4.800 4.800 0.140

0.100 B

-B 3VL9 400-3JM01 1 1 unit 113 0.001 B

-3VL9 600-3JM01 1 1 unit 113 0.001

* You can order this quantity or a multiple thereof. Siemens LV 1 Add-On 10/2006

16/23

16

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Accessories/spare parts
Version DT For VL1200 UL (NG frame) to VL1600 UL (PG frame) Order No. Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. kg

Operating mechanisms 3-pole


NSE0_00679

Front-operated rotary operating mechanisms For direct mounting on the circuit-breaker, without leading auxiliary switch, degree of protection IP301), black B EMERGENCY-STOP version Red knob, yellow indicator plate Safety locks for installation by the customer, see pages 16/36 to 16/39. Door-coupling rotary operating mechanisms, complete, installation in doors and covers Degree of protection IP65, including black knob with masking plate, indicator plate, removable door coupling, 300 mm extension shaft and front-operated rotary operating mechanism for the respective circuit-breaker B EMERGENCY-STOP version, Red knob, yellow indicator plate, without leading auxiliary switch Safety locks for installation by the customer, see pages 16/36 to 16/39. Leading auxiliary switches for installation in a front-operated rotary operating mechanism or door-coupling rotary operating mechanism Standard or EMERGENCY-STOP version "OFF after ON" Leading auxiliary switches when switching on 1 changeover contact with 1.5 m long cables 2 changeover contacts with 1.5 m long cables B B B

3VL9 800-3HA01 3VL9 800-3HC01

1 1

1 unit 1 unit

113 113

2.831 2.831

3VL9 .00-3H.01

NSE0_00711

3VL9 800-3HF01

1 unit

113

3.257

3VL9 .00-3H.01

3VL9 800-3HG01

1 unit

113

3.257

3VL9 .00-3A.11

NSE0_00712

3VL9 800-3AS11 3VL9 800-3AT11

1 1

1 unit 1 unit

113 113

0.080 0.130

16

"ON after OFF" Leading auxiliary switches when switching off 1 changeover contact with 1.5 m long cables 2 changeover contacts with 1.5 m long cables Motorized operating mechanisms2) Degree of protection IP30, with locking device for 3 padlocks, not suitable for synchronizing
NSE0_00716

B B

3VL9 800-3AU11 3VL9 800-3AW11

1 1

1 unit 1 unit

113 113

0.080 0.130

50/60 Hz V AC -42-48 60 110-127 220-250

V DC 24 42-48 60 110-127 220-250 B B B B B B 3VL9 800-3MJ01 3VL9 800-3ML01 3VL9 800-3MS01 3VL9 800-3MN01 3VL9 800-3MQ01 3VL9 800-3HN01 1 1 1 1 1 1 1 unit 1 unit 1 unit 1 unit 1 unit 1 unit 113 113 113 113 113 113 6.800 6.800 6.800 6.800 6.800 0.234

3VL9 .00-3M.01

Toggle handle extensions

Max Flex operating mechanisms, complete with operating mechanism, lever and Bowden wire Degree of protection NEMA 1, 3R, 12 Bowden cable length 0.9 m Bowden cable length 1.2 m B -3VL9 800-3JM01 1 1 unit 113 0.001

NSE0_01860

3VL9 .00-3JM01
1) 2)

IP40 with additional masking frame mounted on the door cut-out. For safety lock as an installation kit for retrofitting, see pages 16/36 to 16/39.

* You can order this quantity or a multiple thereof.

16/24

Siemens LV 1 Add-On 10/2006

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Accessories/spare parts
Version DT For VL150 UL (DG frame) Order No. Price per PU PS* PU (UNIT, SET, M) PG Weight per PU approx. kg

Plug-in versions/withdrawable versions 3-pole


Plug-in base installation kits Complete with base plate, base, blade contacts for circuit-breakers, terminal covers for degree of protection IP20, fixing screws, trip pin
NSE0_00717

3VL9 .00-4PA31 Rear-accessible terminals 3-pole 90 angle connecting adapters for rear connection, 3-pole A 3VL9 300-4PE31 1 1 unit 113 0.375 B 3VL9 200-4PA31 1 1 unit 113 2.170

NSE00581

3VL9 .00-4PE31 Front-accessible terminals 3-pole Withdrawable version installation kits Upgrade of the plug-in base installation kit to withdrawable version including side panels and racking mechanism.
NSE0_00719

3VL9 200-4PC31

1 unit

113

1.980

3-pole

3VL9 300-4WF31

1 unit

113

1.260

3VL9 .00-4WF31 Withdrawable versions Same as plug-in base installation kit, with additional side panels and racking mechanism
NSE0_00683

Rear-accessible terminals 3-pole Front-accessible terminals 3-pole Blade contacts As replacement for converting fixed-mounted circuit-breakers into plug-in/withdrawable circuit-breakers, including trip pin 1 set = 6 units 3-pole

B B

3VL9 200-4WA31 3VL9 200-4WC31

1 1

1 unit 1 unit

113 113

3.430 3.240

3VL9 .00-4WA31

B A

3VL9 200-4PS31 3VL9 300-4PF01

1 1

1 unit 1 unit

113 113

0.248 0.013

Trip pins and springs As replacement for plug-in/withdrawable circuit-breaker Auxiliary circuit plug connections for plug-in bases Accessory connections for plug-in circuitbreakers (factory-wired connectors) and for plug-in bases or withdrawable version (coupling with screw terminal) 8 terminals Position indicator switches (connected/disconnected position) for plug-in/withdrawable base, 1 changeover contact, max. 2 signaling switches possible
1)

1)

3VL9 300-4PJ01

1 unit

113

0.134

3VL9 000-4WL01

1 unit

113

0.019

It is recommended to use a maximum of 2 auxiliary circuit plug-in systems per circuit-breaker (16 terminals).

* You can order this quantity or a multiple thereof. Siemens LV 1 Add-On 10/2006

16/25

16

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Accessories/spare parts
Version DT For VL250 UL (FG frame) Order No. Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. kg

Plug-in versions/withdrawable versions 3-pole


Plug-in base installation kits Complete with base plate, base, blade contacts for circuit-breakers, terminal covers for degree of protection IP20, fixing screws, trip pin
NSE0_00717

3VL9 .00-4PA31 Rear-accessible terminals 3-pole 90 angle connecting adapters for rear connection, 3-pole A 3VL9 300-4PE31 1 1 unit 113 0.375 A 3VL9 300-4PA31 1 1 unit 113 2.280

NSE00581

3VL9 .00-4PE31 Front-accessible terminals 3-pole Withdrawable version installation kits Upgrade of the plug-in base installation kit to withdrawable version including side panels and racking mechanism.
NSE0_00719

3VL9 300-4PC31

1 unit

113

2.090

3-pole

3VL9 300-4WF31

1 unit

113

1.260

16

3VL9 .00-4WF31 Withdrawable versions Same as plug-in base installation kit, with additional side panels and racking mechanism
NSE0_00683

Rear-accessible terminals 3-pole Front-accessible terminals 3-pole Blade contacts As replacement for converting fixed-mounted circuit-breakers into plug-in/withdrawable circuit-breakers, including trip pin 1 set = 6 units 3-pole Trip pins and springs As replacement for plug-in/withdrawable circuit-breaker

B B

3VL9 300-4WA31 3VL9 300-4WC31

1 1

1 unit 1 unit

113 113

3.540 3.350

3VL9 .00-4WA31

3VL9 300-4PS31

1 unit

113

0.342

3VL9 300-4PF01

1 unit

113

0.013

Auxiliary circuit plug connections for plug-in bases Accessory connections for plug-in circuit-breakers (factory-wired connectors) and for plug-in bases or withdrawable version (coupling with screw terminal) 8 terminals Position indicator switches (connected/disconnected position) for plug-in/withdrawable base, 1 changeover contact, max. 2 signaling switches possible
1) 2)

1)

3VL9 300-4PJ01

1 unit

113

0.134

3VL9 000-4WL01

1 unit

113

0.019

It is recommended to use a maximum of 2 auxiliary circuit plug-in systems per circuit-breaker (16 terminals). It is recommended to use a maximum of 3 auxiliary circuit plug-in systems per circuit-breaker (24 terminals).

* You can order this quantity or a multiple thereof.

16/26

Siemens LV 1 Add-On 10/2006

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Accessories/spare parts
For VL400 UL (JG frame) DT Order No. Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. kg DT For VL400X (LG frame) Order No. Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. kg

3VL9 400-4PA31 --

1 unit

113

5.869 B

3VL9 460-4PA31 --

1 unit

113

8.200

3VL9 400-4PC31

1 unit

113

5.424 B

3VL9 460-4PC31

1 unit

113

7.400

3VL9 400-4WF31

1 unit

113

3.400 B

3VL9 460-4WF31

1 unit

113

3.600

B B

3VL9 400-4WA31 3VL9 400-4WC31

1 1

1 unit 1 unit

113 113

8.769 B 8.324 B

3VL9 460-4WA31 3VL9 460-4WC31

1 1

1 unit 1 unit

113 113

11.000 10.300

3VL9 400-4PS31

1 unit

113

0.720 B

3VL9 460-4PS31

1 unit

113

1.260

3VL9 400-4PF01

1 unit

113

0.015 B

3VL9 460-4PF01

1 unit

113

0.018

2)

2)

3VL9 400-4PJ01

1 unit

113

0.144 B

3VL9 460-4PJ01

1 unit

113

0.144

3VL9 000-4WL01

1 unit

113

0.019 B

3VL9 000-4WL01

1 unit

113

0.019

* You can order this quantity or a multiple thereof. Siemens LV 1 Add-On 10/2006

16/27

16

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Accessories/spare parts
Version DT For VL800 UL (MG frame) Order No. Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. kg

Plug-in versions/withdrawable versions 3-pole


Plug-in base installation kits Complete with base plate, base, blade contacts for circuit-breakers, terminal covers for degree of protection IP20, fixing screws, trip pin
NSE0_00717

3VL9 .00-4PA31 Rear-accessible terminals 3-pole 90 angle connecting adapters for rear connection, 3-pole ---

NSE00581

3VL9 .00-4PE31 Front-accessible terminals 3-pole Withdrawable version installation kits Upgrade of the plug-in base installation kit to withdrawable version including side panels and racking mechanism.
NSE0_00719

--

3-pole

--

16

3VL9 .00-4WF31 Withdrawable versions Same as plug-in base installation kit, with additional side panels and racking mechanism
NSE0_00683

Rear-accessible terminals1) 3-pole Front-accessible terminals 3-pole Blade contacts As replacement for converting fixed-mounted circuit-breakers into plug-in/withdrawable circuit-breakers, including trip pin 1 set = 6 units 3-pole Trip pins and springs As replacement for plug-in/withdrawable circuit-breaker

B B

3VL9 600-4WA31 3VL9 600-4WC31

1 1

1 unit 1 unit

113 113

40.104 40.716

3VL9 .00-4WA31

3VL9 600-4PS31

1 unit

113

1.500

3VL9 600-4PF01

1 unit

113

0.025

Auxiliary circuit plug connections for plug-in bases Accessory connections for plug-in circuit-breakers (factory-wired connectors) and for plug-in bases or withdrawable version (coupling with screw terminal) 8 terminals Position indicator switches (connected/disconnected position) for plug-in/withdrawable base, 1 changeover contact, max. 2 signaling switches possible
1) 2)

2)

3VL9 600-4PJ01

1 unit

113

0.144

3VL9 000-4WL01

1 unit

113

0.019

With VL800 UL (MG frame) to VL1600 UL (PG frame) as vertical connection. It is recommended to use a maximum of 3 auxiliary circuit plug-in systems per circuit-breaker (24 terminals).

* You can order this quantity or a multiple thereof.

16/28

Siemens LV 1 Add-On 10/2006

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Accessories/spare parts
For VL1200 UL (NG frame) DT Order No. Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. kg DT For VL1600 UL (PG frame) Order No. Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. kg

---

---

--

--

--

--

B B

3VL9 800-4WA31 3VL9 800-4WC31

1 1

1 unit 1 unit

113 113

39.996 B 40.608 B

3VL9 800-4WA31 3VL9 800-4WC31

1 1

1 unit 1 unit

113 113

39.996 40.608

3VL9 800-4PS31

1 unit

113

2.000 B

3VL9 800-4PS31

1 unit

113

2.000

3VL9 800-4PF01

1 unit

113

0.030 B

3VL9 800-4PF01

1 unit

113

0.030

2)

2)

3VL9 800-4PJ01

1 unit

113

0.144 B

3VL9 800-4PJ01

1 unit

113

0.144

3VL9 000-4WL01

1 unit

113

0.019 B

3VL9 000-4WL01

1 unit

113

0.019

* You can order this quantity or a multiple thereof. Siemens LV 1 Add-On 10/2006

16/29

16

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Accessories/spare parts
Version For VL150 UL (DG frame) DT Order No. Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. kg

Connection parts for fixed-mounted circuit-breakers 3-pole


Rear-mounting terminals Short terminal (1 unit) Long terminal (1 unit) Terminal kit (2 short + 1 long) 3-pole
NSE0_00723

B B B

3VL9 200-4RA01 3VL9 200-4RB01 3VL9 200-4RC31

1 1 unit 1 1 unit 1 1 unit

113 113 113

0.126 0.229 0.408

3VL9 .00-4RA01, 3VL9 .00-4RB01 Short flat connector (1 unit) Long flat connector (1 unit) Flat connector kit (2 short + 1 long) 3-pole B B 3VL9 200-4RK01 3VL9 200-4RL01 1 1 unit 1 1 unit 113 113 0.104 0.200

NSE0_00724

3VL9 200-4RM31

1 1 unit

113

0.408

3VL9 .00-4RK01, 3VL9 .00-4RL01


NSE0_00725

Flat connecting bar (1 unit) Flat connecting bar 1 set = 3 units, 3-pole

---

3VL9 .00-4R..1 Box terminals Connection for flexible flat copper busbar or cable 1 set = 3 units
NSE0_00700a

3VL9 220-4TC31

1 1 unit

113

0.084

3VL9 ...-4TC.1

16

N S E 0 _ 0 1 5 2 9

Round cable terminals1) Only for cables (Al or Cu) Aluminum terminal (tinned) 1 set = 3 units B 3VL9 230-4TD31 1 1 unit 113 0.041

3VL9 ...-4TD.1 Multiple feed-in terminals Only for cables (Al or Cu) Aluminum terminal (tinned)
N S E 0 _ 0 1 5 4 2 N S E 0 _ 0 1 5 4 3

--

3 units Terminals with screw connection with insulator (for rear) for use with busbars and cable lugs

3VL9 ...-4TF.1

NSE0_00701a

3VL9 .00-4TA.1

1 set = 3 units 1 set = 3 units Cable lug connection 1 set = 3 units 1 set = 9 units 1 set = 12 units

metric thread inch thread

B B

3VL9 200-4TA31 3VL9 200-4TB31

1 1 unit 1 1 unit

113 113

0.055 0.055

3VL9 335-4TM31 ---

1 1 unit

113

0.001

1)

Round cable terminal for VL150 UL suitable for 60 to 150 A.

* You can order this quantity or a multiple thereof.

16/30

Siemens LV 1 Add-On 10/2006

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Accessories/spare parts
For VL250 UL (FG frame) DT Order No. Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. kg DT For VL400 UL (JG frame) Order No. Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. kg

B B B

3VL9 300-4RA01 3VL9 300-4RB01 3VL9 300-4RC31

1 1 1

1 unit 1 unit 1 unit

113 113 113

0.126 B 0.229 B 0.481 B

3VL9 400-4RA01 3VL9 400-4RB01 3VL9 400-4RC31

1 1 1

1 unit 1 unit 1 unit

113 113 113

0.219 0.377 0.816

B B

3VL9 300-4RK01 3VL9 300-4RL01

1 1

1 unit 1 unit

113 113

0.104 B 0.200 B

3VL9 400-4RK01 3VL9 400-4RL01

1 1

1 unit 1 unit

113 113

0.343 1.190

3VL9 300-4RM31

1 unit

113

0.408 B

3VL9 400-4RM31

1 unit

113

0.502

---

---

3VL9 335-4TC31

1 unit

113

0.084 B

3VL9 460-4TC31

1 unit

113

0.423

3VL9 335-4TD31

1 unit

113

0.159 B

3VL9 475-4TD31

1 unit

113

0.041

--

3VL9 425-4TF31

1 unit

113

0.420

B B

3VL9 300-4TA31 3VL9 300-4TB31

1 1

1 unit 1 unit

113 113

0.055 B 0.055

3VL9 400-4TA31 --

1 unit

113

0.055

3VL9 335-4TM31 ---

1 unit

113

0.001 B

3VL9 460-4TM31 ---

1 unit

113

0.001

* You can order this quantity or a multiple thereof. Siemens LV 1 Add-On 10/2006

16/31

16

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Accessories/spare parts
Version For VL400X UL (LG frame) DT Order No. Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. kg

Connection parts for fixed-mounted circuit-breakers 3-pole


Rear-mounting terminals Short terminal (1 unit) Long terminal (1 unit) Terminal kit (2 short + 1 long) 3-pole
NSE0_00723

----

3VL9 .00-4RA01, 3VL9 .00-4RB01 Short flat connector (1 unit) Long flat connector (1 unit) Flat connector kit (2 short + 1 long) 3-pole ---

NSE0_00724

--

3VL9 .00-4RK01, 3VL9 .00-4RL01


NSE0_00725

Flat connecting bar (1 unit) Flat connecting bar 1 set = 3 units, 3-pole

B B

3VL9 460-4RG01 3VL9 460-4RH31

1 1 unit 1 1 unit

113 113

0.358 1.075

3VL9 .00-4R..1 Box terminals Connection for flexible flat copper busbar or cable 1 set = 3 units
NSE0_00700a

--

3VL9 .00-4TC.1

16

N S E 0 _ 0 1 5 2 9

Round cable terminals Only for cables (Al or Cu) Aluminum terminal (tinned) 1 set = 3 units B 3VL9 475-4TD31 1 1 unit 113 0.041

3VL9 .00-4TD.1 Multiple feed-in terminals Only for cables (Al or Cu) Aluminum terminal (tinned)
N S E 0 _ 0 1 5 4 2 N S E 0 _ 0 1 5 4 3

1 set = 3 units

double Terminal on the incoming side1) Terminal on the outgoing side1) triple quadruple B B

-3VL9 460-4TX31 3VL9 460-4TY31 --1 1 unit 1 1 unit 113 113 0.420 0.420

3VL9 ...-4TF.1

Terminals with screw connection with insulator (for rear) for use with busbars and cable lugs
NSE0_00701a

3VL9 .00-4TA.1
1)

1 set = 3 units 1 set = 3 units

metric thread inch thread

B B

3VL9 460-4TA31 3VL9 460-4TB31

1 1 unit 1 1 unit

113 113

0.055 0.055

Extended terminal cover is included in the scope of supply.

* You can order this quantity or a multiple thereof.

16/32

Siemens LV 1 Add-On 10/2006

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Accessories/spare parts
For VL800 UL (MG frame) DT Order No. Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. kg DT For VL1200 UL (NG frame) Order No. Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. kg

----

----

---

---

--

--

B B

3VL9 600-4RG01 3VL9 600-4RH31

1 1

1 unit 1 unit

113 113

1.604 B 4.812 B

3VL9 700-4RG01 3VL9 700-4RH31

1 1

1 unit 1 unit

113 113

1.604 4.812

--

--

--

--

3VL9 675-4TF31 ---

1 unit

113

0.420

----

3VL9 660-4TG31 --

1 unit

113

0.918 B B

3VL9 760-4TG31 3VL9 750-4TH31

1 1

1 unit 1 unit

113 113

0.918 0.918

B B

3VL9 600-4TA31 3VL9 600-4TB31

1 1

1 unit 1 unit

113 113

0.055 B 0.055 B

3VL9 800-4TA31 3VL9 800-4TB31

1 1

1 unit 1 unit

113 113

0.055 0.055

* You can order this quantity or a multiple thereof. Siemens LV 1 Add-On 10/2006

16/33

16

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Accessories/spare parts
Version For VL1600 UL (PG frame) DT Order No. Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. kg

Connection parts for fixed-mounted circuit-breakers 3-pole


Rear-mounting terminals Short terminal (1 unit) Long terminal (1 unit) Terminal kit (2 short + 1 long) 3-pole
NSE0_00723

----

3VL9 .00-4RA01, 3VL9 .00-4RB01 Short flat connector (1 unit) Long flat connector (1 unit) Flat connector kit (2 short + 1 long) 3-pole ---

NSE0_00724

--

3VL9 .00-4RK01, 3VL9 .00-4RL01


NSE0_00725

Flat connecting bar (1 unit) Flat connecting bar 1 set = 3 units, 3-pole

B B

3VL9 800-4RG01 3VL9 800-4RH31

1 1 unit 1 1 unit

113 113

1.527 4.581

3VL9 .00-4R..1 Box terminals Connection for flexible flat copper busbar or cable 1 set = 3 units
NSE0_00700a

--

3VL9 ...-4TC.1

16

N S E 0 _ 0 1 5 2 9

Round cable terminals Only for cables (Al or Cu) Aluminum terminal (tinned) 1 set = 3 units --

3VL9 ...-4TD.1 Multiple feed-in terminals Only for cables (Al or Cu) Aluminum terminal (tinned) 1 set = 3 units
N S E 0 _ 0 1 5 4 4

--

3VL9 ...-4TG.1 Terminals with screw connection with insulator (for rear) for use with busbars and cable lugs
NSE0_00701a

3VL9 .00-4TA.1

1 set = 3 units 1 set = 3 units

metric thread inch thread

B B

3VL9 800-4TA31 3VL9 800-4TB31

1 1 unit 1 1 unit

113 113

0.055 0.055

* You can order this quantity or a multiple thereof.

16/34

Siemens LV 1 Add-On 10/2006

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Accessories/spare parts
Version DT For VL150 UL (DG frame) Order No. Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. kg

Interlocks 3-pole
Locking devices for toggle levers for locking the circuit-breaker in the "OFF" position. Up to 3 padlocks with 5 8 mm can be used. Removable (padlocks not included)
NSE0_00732

3VL9 300-3HL01

1 unit

113

0.052

3VL9 .00-3HL01

Rear interlocking modules for the mechanical interlocking of two adjacent circuit-breakers. The circuit-breakers must be of the same installation type and size. (Mounting plate not included in scope of supply) Fixed-mounted circuit-breakers B 3VL9 300-8LC01 1 1 unit 113 0.215

Interlocking modules for Bowden wire interlocking1) for the mechanical interlocking of two circuit-breakers. Interlocking module for one circuit-breaker B
NSE0_00733

Combinations of next size up/down possible (see Order No.) 3VL9 300-8LA01 1 1 unit 113 0.174

3VL9 .00-8L.01

Bowden wires for Bowden wire interlocking1) Bowden wire length 0.5 m Bowden wire length 1.0 m Bowden wire length 1.5 m Safety lock installation kits Key can be removed with the circuit-breaker in the "OFF" position For front-operated rotary operating mechanisms Lock types RONIS CES B B 3VL9 715-8HA01 3VL9 711-8HA01 1 1 1 unit 1 unit 113 113 0.309 0.210 B B B 3VL9 000-8LH11 3VL9 000-8LH21 3VL9 000-8LH31 1 1 1 1 unit 1 unit 1 unit 113 113 113 0.206 0.298 0.412

3VL9 .00-8LA01

NSE0_00680

NSE0_00734

For motorized operating mechanism with spring energy store Lock types RONIS Filli Giussani B Sets of fixing screws (metric thread) including the screws, washers and nuts required to secure a circuit-breaker to a prepared surface Set with 4 screws Transparent covers for trip units, sealable to prevent access by unqualified personnel and unauthorized changes to settings (seal not included) Solid-state overcurrent trip unit Thermal-magnetic Function testers for electronic trip units for ETU/LCD ETU trip unit B B B 3VL9 700-8BL01 3VL9 300-8BM01 3VL9 000-8AK01 1 1 1 1 unit 1 unit 1 unit 113 113 113 0.002 0.015 0.419 B 3VL9 300-8SA41 1 1 unit 113 0.015 -3VL9 321-8HA01 1 1 unit 113 0.053

3VL9 ...-8HA01

NSE-00573

3VL9 000-8AK01

Universal power supplies for function tester (50/60 Hz 120240 V AC) Adapter unit required if the battery power for the function tester is not used Battery power supplies for activating/parameterizing the LCD ETU trip unit (two 9 V blocks are required in addition)

3VL9 000-8AL01

1 unit

113

0.368

3VL9 000-8AP01

1 unit

113

0.605

3VL9 000-8AP01
1)

Two interlocking modules and one Bowden wire are required. Cannot be used in conjunction with motorized operating mechanism.

* You can order this quantity or a multiple thereof. Siemens LV 1 Add-On 10/2006

NSE0_01531a

16/35

16

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Accessories/spare parts
Version DT For VL250 UL (FG frame) Order No. Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. kg

Interlocks 3-pole
Locking devices for toggle levers for locking the circuit-breaker in the "OFF" position. Up to 3 padlocks with 5 8 mm can be used. Removable (padlocks not included)
NSE0_00732

3VL9 300-3HL01

1 unit

113

0.052

3VL9 .00-3HL01

Rear interlocking modules for the mechanical interlocking of two adjacent circuit-breakers. The circuit-breakers must be of the same installation type and size. (Mounting plate not included in scope of supply) Fixed-mounted circuit-breakers B 3VL9 300-8LC01 1 1 unit 113 0.215

Interlocking modules for Bowden wire interlocking 1) for the mechanical interlocking of two circuit-breakers. Interlocking module for one circuit-breaker B Bowden wires for Bowden wire interlocking1) Bowden wire length 0.5 m Bowden wire length 1.0 m
NSE0_00734

Combinations of next size up/down possible (see Order No.) 3VL9 300-8LA01 1 1 unit 113 0.174

NSE0_00733

3VL9 .00-8L.01

B B B

3VL9 000-8LH11 3VL9 000-8LH21 3VL9 000-8LH31

1 1 1

1 unit 1 unit 1 unit

113 113 113

0.206 0.298 0.412

Bowden wire length 1.5 m Safety lock installation kits Key can be removed with the circuit-breaker in the "OFF" position For front-operated rotary operating mechanisms Lock types RONIS CES

3VL9 .00-8LA01

B B

3VL9 715-8HA01 3VL9 711-8HA01

1 1

1 unit 1 unit

113 113

0.309 0.210

NSE0_00680

16

For motorized operating mechanism with spring energy store Lock types RONIS Filli Giussani B Sets of fixing screws (metric thread) including the screws, washers and nuts required to secure a circuit-breaker to a prepared surface Set with 4 screws Transparent covers for trip units, sealable to prevent access by unqualified personnel and unauthorized changes to settings (seal not included) Solid-state overcurrent trip unit Thermal-magnetic Function testers for electronic trip units for ETU/LCD ETU trip unit B B B 3VL9 700-8BL01 3VL9 300-8BM01 3VL9 000-8AK01 1 1 1 1 unit 1 unit 1 unit 113 113 113 0.002 0.015 0.419 B 3VL9 300-8SA41 1 1 unit 113 0.015 -3VL9 321-8HA01 1 1 unit 113 0.053

3VL9 ...-8HA01

NSE-00573

3VL9 000-8AK01

Universal power supplies for function tester (50/60 Hz 120240 V AC) Adapter unit required if the battery power for the function tester is not used Battery power supplies for activating/parameterizing the LCD ETU trip unit (two 9 V blocks are required in addition)

3VL9 000-8AL01

1 unit

113

0.368

3VL9 000-8AP01

1 unit

113

0.605

3VL9 000-8AP01
1)

Two interlocking modules and one Bowden wire are required. Cannot be used in conjunction with motorized operating mechanism.

NSE0_01531a

* You can order this quantity or a multiple thereof.

16/36

Siemens LV 1 Add-On 10/2006

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Accessories/spare parts
For VL400 UL (JG frame) DT Order No. Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. kg DT For VL400X UL (LG frame) Order No. Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. kg

3VL9 400-3HL01

1 unit

113

0.122 B

3VL9 400-3HL01

1 unit

113

0.122

3VL9 400-8LC01

1 unit

113

0.386 B

3VL9 400-8LC01

1 unit

113

0.386

Combinations of next size up/down possible (see Order No.) B 3VL9 400-8LA01 1 1 unit 113 0.196 B 3VL9 400-8LA01 1 1 unit 113 0.196

-B B 3VL9 000-8LH21 3VL9 000-8LH31 1 1 1 unit 1 unit 113 113 0.298 B 0.412 B

-3VL9 000-8LH21 3VL9 000-8LH31 1 1 1 unit 1 unit 113 113 0.298 0.412

B B

3VL9 715-8HA01 3VL9 711-8HA01

1 1

1 unit 1 unit

113 113

0.309 B 0.210 B

3VL9 715-8HA01 3VL9 711-8HA01

1 1

1 unit 1 unit

113 113

0.309 0.210

3VL9 715-8HA01 --

1 unit

113

0.309 B

3VL9 715-8HA01 --

1 unit

113

0.309

3VL9 400-8SA41

1 unit

113

0.017 B

3VL9 400-8SA41

1 unit

113

0.017

B B B

3VL9 700-8BL01 3VL9 400-8BM01 3VL9 000-8AK01

1 1 1

1 unit 1 unit 1 unit

113 113 113

0.002 B 0.017 B 0.419 B

3VL9 700-8BL01 3VL9 400-8BM01 3VL9 000-8AK01

1 1 1

1 unit 1 unit 1 unit

113 113 113

0.002 0.017 0.419

3VL9 000-8AL01

1 unit

113

0.368 B

3VL9 000-8AL01

1 unit

113

0.368

3VL9 000-8AP01

1 unit

113

0.605 B

3VL9 000-8AP01

1 unit

113

0.605

* You can order this quantity or a multiple thereof. Siemens LV 1 Add-On 10/2006

16/37

16

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Accessories/spare parts
Version DT For VL800 UL (MG frame) Order No. Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. kg

Interlocks 3-pole
Locking devices for toggle levers for locking the circuit-breaker in the "OFF" position. Up to 3 padlocks with 5 8 mm can be used. Removable (padlocks not included)
NSE0_00732

3VL9 600-3HL01

1 unit

113

0.130

3VL9 .00-3HL01

Rear interlocking modules for the mechanical interlocking of two adjacent circuit-breakers. The circuit-breakers must be of the same installation type and size. (Mounting plate not included in scope of supply) Fixed-mounted circuit-breakers B 3VL9 600-8LC01 1 1 unit 113 1.499

NSE0_00733

Interlocking modules for Bowden wire interlocking1) for the mechanical interlocking of two circuit-breakers. Interlocking module for one circuit-breaker B Bowden wires for Bowden wire interlocking1) Bowden wire length 0.5 m Bowden wire length 1.0 m B B

Combinations of next size up/down possible (see Order No.) 3VL9 600-8LA01 1 1 unit 113 0.244

3VL9 .00-8L.01

-3VL9 000-8LH21 3VL9 000-8LH31 1 1 1 unit 1 unit 113 113 0.298 0.412

NSE0_00734

Bowden wire length 1.5 m Safety lock installation kits Key can be removed with the circuit-breaker in the "OFF" position For front-operated rotary operating mechanisms Lock types RONIS CES

3VL9 .00-8LA01

B B

3VL9 715-8HA01 3VL9 711-8HA01

1 1

1 unit 1 unit

113 113

0.309 0.210

16

NSE0_00680

For motorized operating mechanism with spring energy store Lock types RONIS Filli Giussani Sets of fixing screws (metric thread) including the screws, washers and nuts required to secure a circuit-breaker to a prepared surface Set with 4 screws B 3VL9 600-8SA41 1 1 unit 113 1.499 Transparent covers for trip units, sealable to prevent access by unqualified personnel and unauthorized changes to settings (seal not included) Solid-state overcurrent trip unit B Thermal-magnetic Function testers for electronic trip units for ETU/LCD ETU trip unit B B 3VL9 715-8HA01 -1 1 unit 113 0.309

3VL9 ....-8HA01

3VL9 700-8BL01 -3VL9 000-8AK01

1 unit

113

0.002

1 unit

113

0.419

NSE-00573

3VL9 000-8AK01

Universal power supplies for function tester (50/60 Hz 120240 V AC) Adapter unit required if the battery power for the function tester is not used Battery power supplies for activating/parameterizing the LCD ETU trip unit (two 9 V blocks are required in addition)

3VL9 000-8AL01

1 unit

113

0.368

3VL9 000-8AP01

1 unit

113

0.605

3VL9 000-8AP01
1)

Two interlocking modules and one Bowden wire are required. Cannot be used in conjunction with motorized operating mechanism.

NSE0_01531a

* You can order this quantity or a multiple thereof.

16/38

Siemens LV 1 Add-On 10/2006

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Accessories/spare parts
For VL1200 UL (NG frame) DT Order No. Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. kg DT For VL1600 UL (PG frame) Order No. Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. kg

3VL9 800-3HL01

1 unit

113

0.238 B

3VL9 800-3HL01

1 unit

113

0.238

3VL9 800-8LC01

1 unit

113

2.935 B

3VL9 800-8LC01

1 unit

113

2.935

Combinations of next size up/down possible (see Order No.) B 3VL9 800-8LA01 1 1 unit 113 0.283 B 3VL9 800-8LA01 1 1 unit 113 0.283

--B 3VL9 000-8LH31 1 1 unit 113 0.412 B

--3VL9 000-8LH31 1 1 unit 113 0.412

B B

3VL9 715-8HA01 3VL9 711-8HA01

1 1

1 unit 1 unit

113 113

0.309 B 0.210 B

3VL9 715-8HA01 3VL9 711-8HA01

1 1

1 unit 1 unit

113 113

0.309 0.210

3VL9 715-8HA01 --

1 unit

113

0.309 B

3VL9 715-8HA01 --

1 unit

113

0.309

3VL9 800-8SA41

1 unit

113

2.935 B

3VL9 800-8SA41

1 unit

113

2.935

3VL9 700-8BL01 --

1 unit

113

0.002 B

3VL9 700-8BL01 --

1 unit

113

0.002

3VL9 000-8AK01

1 unit

113

0.419 B

3VL9 000-8AK01

1 unit

113

0.419

3VL9 000-8AL01

1 unit

113

0.368 B

3VL9 000-8AL01

1 unit

113

0.368

3VL9 000-8AP01

1 unit

113

0.605 B

3VL9 000-8AP01

1 unit

113

0.605

* You can order this quantity or a multiple thereof. Siemens LV 1 Add-On 10/2006

16/39

16

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Accessories/spare parts
Version DT For VL150 UL (DG frame) Order No. Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. kg

Further accessories 3-pole


Masking frames (cover frames) for door cut-outs A IP40 Fixed-mounted or plug-in circuit-breaker B 3VL9 300-8BC01 1 1 unit 113 0.038

NSE-00574

Masking frame A B1) IP40 Fixed-mounted, plug-in or withdrawable circuit-breaker with front-operated rotary operating mechanism or motorized operating mechanism

3VL9 300-8BG01

1 1 unit

113

0.099

NSE-00575

Masking frame B C IP20 Withdrawable circuit-breaker with toggle lever actuation. Installation kit contains masking frame and extended escutcheon (cannot be used together with a motorized operating B mechanism/rotary operating mechanism)

3VL9 300-8BH01

1 1 unit

113

0.267

Masking frame C Version DT For VL800 UL (MG frame) Order No. Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx.

16

Further accessories 3-pole


Masking frames (cover frames) for door cut-outs A IP40 B1) IP40 Fixed-mounted or plug-in circuit-breaker Fixed-mounted, plug-in or withdrawable circuit-breaker with front-operated rotary operating mechanism or motorized operating mechanism B 3VL9 600-8BC01 1 1 unit 113 0.055

3VL9 600-8BG01

1 1 unit

113

0.177

C IP20

Withdrawable circuit-breaker with toggle lever actuation. Installation kit contains masking frame and extended escutcheon (cannot be used together with a motorized operating mechanism/rotary operating mechanism) B

3VL9 600-8BH01

1 1 unit

113

0.575

1)

For withdrawable version IP20.

For type

Version

DT

Order No.

Price per PU

PU PS* (UNIT, SET, M)

PG

Weight per PU approx. kg

Accessories for communication 3-pole Data transmission using COM10


VL150 UL (DG frame) to VL1600 UL (PG frame) COM10 (PROFIBUS module for SENTRON 3VL UL) Module for connecting the SENTRON 3VL UL to the PROFIBUS DP, including switching function and Zone Selective Interlocking functionality, including connection cable to LCD ETU. B 3VL9 000-8AR01 1 1 unit 113 1.038

* You can order this quantity or a multiple thereof.

16/40

Siemens LV 1 Add-On 10/2006

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Accessories/spare parts
For VL250 UL (FG frame) DT Order No. Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. kg DT For VL400 UL (JG frame) and VL400X UL (LG frame) Order No. Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. kg

3VL9 300-8BC01

1 unit

113

0.038 B

3VL9 400-8BC01

1 unit

113

0.017

3VL9 300-8BG01

1 unit

113

0.099 B

3VL9 400-8BG01

1 unit

113

0.017

3VL9 300-8BH01

1 unit

113

0.267 B

3VL9 400-8BH01

1 unit

113

0.017

For VL1200 UL (NG frame) DT Order No. Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. kg DT

For VL1600 UL (PG frame) Order No. Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. kg

3VL9 800-8BC01

1 unit

113

0.043 B

3VL9 800-8BC01

1 unit

113

0.043

3VL9 800-8BG01

1 unit

113

0.192 B

3VL9 800-8BG01

1 unit

113

0.192

3VL9 800-8BH01

1 unit

113

0.531 B

3VL9 800-8BH01

1 unit

113

0.531

* You can order this quantity or a multiple thereof. Siemens LV 1 Add-On 10/2006

16/41

16

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
General data

Design
6

16

10

$ % & ( ) * + , . / 0 1 2 3 4 5 6

Withdrawable/plug-in base Side panels of withdrawable version Multiple feed-in terminal for Al/Cu (size-dependent) Round cable terminal for Al/Cu Box terminal for Cu Masking frame/cover frame for door cut-out Motorized operating mechanism (synchronizable) Front-operated rotary operating mechanism Door-coupling rotary operating mechanism Max Flex operating mechanism Electronic overcurrent trip unit (LCD ETU) Internal accessories 3VL molded case circuit-breakers UL (LCD ETU) Solid-state overcurrent trip units (ETU) TM Thermal-magnetic overcurrent trip units Manual tester for electronic trip unit COM10 PROFIBUS module Rear terminals flat and round

16/42

Siemens LV 1 Add-On 10/2006

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
General data

3 4 5

13 16

12

17

11 15

18 3 4 5

Siemens LV 1 Add-On 10/2006

16/43

16

14

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
General data
Rated current range from 30 A to 1600 A Different switching capacity for each frame size
N H L Standard (35 kA) High (65 kA) Very high (100 kA)

No derating or loss of performance up to 40 C Solid-state overcurrent trip units from size 150 A (VL150 UL, DG frame), particularly for time-based discrimination and ground-fault protection 2 families of internal accessories Full range of external accessories e.g. terminals for aluminum cable. All circuit-breakers are supplied with integrated overcurrent trip units. The SENTRON VL150 UL (DG-Frame) to VL1600 UL (PG-Frame) circuit-breakers are available with different connection variants (see "Main connections, basic equipment and options", page 16/48). Auxiliary switches/alarm switches or auxiliary trip units can be easily adapted by the customer, or they are also available ready installed if required. The switching capacity is shown on the front of every circuit-breaker. Standard switching capacity: Icu = 35 kA at 50/60 Hz 480 V AC High switching capacity: Icu = 65 kA at 50/60 Hz 480 V AC Very high switching capacity: Icu = 100 kA at 50/60 Hz 480 V AC Standards and specifications SENTRON 3VL UL circuit-breakers comply with: UL 489, CSA (CSA - C22.2), IEC/EN 60947-2, isolating features according to IEC 60947-2, EN 60947-2, NOM (NMX-J-266-ANCE-2002) on request. Please contact Siemens for details of other standards. The SENTRON 3VL UL circuit-breakers also comply with requirements for "disconnector units with features for stopping and switching off in an emergency" (EMERGENCY-STOP switches) in conjunction with lockable rotary operating mechanisms (red-yellow) and terminal covers. Please contact Siemens for details of other standards.

Connection The following connection types are available for the SENTRON 3VL approved according to UL 489: Box terminal, suitable for stranded conductors, flexible copper bars and finely stranded conductors with end sleeves Screw terminals for flat connector Round cable/multiple feed-in terminal for Al/Cu cable Cable lug connection The SENTRON VL1600 UL circuit-breakers are supplied with front connecting bars. The incoming and outgoing connections for the circuit-breaker can be freely selected. The electrical specifications remain the same. Bare conductors at the top connections must be insulated in the arc quenching space that is necessary above the arc chute. For the SENTRON VL150 UL (DG frame) to VL1600 UL (PG frame) circuit-breakers, the connections for the internal accessories (auxiliary trip units, auxiliary switches and alarm switches) are supplied with terminal screws. The auxiliary trip units (shunt trip units and undervoltage trip units), auxiliary switches and alarm switches for all SENTRON 3VL circuit-breakers can be connected easily and directly. The motorized operating mechanisms with stored-energy feature are always equipped with terminals. The leading auxiliary switches for the rotary operating mechanisms are always supplied with connecting cables.

16

16/44

Siemens LV 1 Add-On 10/2006

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
General data
SENTRON VL150 UL (DG frame) to VL1600 UL (PG frame) circuit-breakers The main components of the SENTRON 3VL UL circuit-breakers are the three conducting paths with the incoming and outgoing terminals. The fixed and moving contacts are designed in such a way that the contacts are magnetically repelled if there is a short-circuit. In conjunction with the arcing chambers, a dynamic impedance is created that causes current limiting due to a reduction in the damaging effects of I2t and Ip energy that arises during short-circuits. The circuit-breaker is trip-free. To the right and left of the operating mechanism, the doubleinsulated accessory compartments are situated for the auxiliary trip units and auxiliary switches. The trip units for the SENTRON VL150 UL (DG frame) to VL1600 UL (PG frame) have the following features: The trip units are available in thermal-magnetic and solid-state versions. The thermal-magnetic trip units have permanently set overload releases and adjustable short-circuit releases. As is the case for all versions of the SENTRON 3VL UL circuitbreakers with electronic trip units, the current transformers are in the same enclosure as the trip units. They send a signal which is proportional to the load current to the electronic overcurrent trip unit. All SENTRON 3VL UL circuit-breakers with electronic trip units measure the actual r.m.s. current. This type of measurement is the most accurate method and enables reliable evaluation of currents in today's electrical distribution systems with extreme harmonics. Overcurrent trip unit systems The trips units are delivered complete with the factory-installed contact unit. The incoming and outgoing connections of the circuit-breaker can only be freely selected with complete circuitbreakers. 1. Overcurrent trip unit for the SENTRON VL150 UL (DG frame) to VL1600 UL (PG frame) circuit-breakers, thermal-magnetic The overcurrent and short-circuit releases function with bimetallic and magnetic trip units. They are available with permanently set overload releases and adjustable short-circuit releases. The circuit-breakers for starter combination applications are usually combined with a motor contactor and a suitable overload relay.
Abbreviations (functions)
L S I = Long Time Delay = Short Time Delay = Instantaneous = Overload protection = Short-circuit protection (short-time delayed) = Short-circuit protection (instantaneous)

The non-automatic circuit-breakers have an integrated shortcircuit self-protection system eliminating the need for back-up fuses. Non-automatic circuit-breakers have no overload protection. 2. Overcurrent trip unit for the SENTRON VL150 UL (DG frame) to VL1600 UL (PG frame) circuit-breakers, solid-state, ETU The electronic overcurrent trip unit system consists of: 3 current transformers Evaluation electronics with microprocessor Internal power supply, no external auxiliary voltage necessary Tripping solenoid. For the SENTRON VL150 UL (DG frame) and VL250 (FG frame) circuit-breakers, the tripping solenoid is installed in the left accessory compartment. The protection functions of the solid-state overcurrent trip units are maintained without additional auxiliary voltage. The electronic trip units are powered by circuit-breaker-internal current transformers. The solid-state overcurrent trip unit has to be activated for parameterizing. This requires a load current of at least 20 % of the respective rated current In of the circuit-breaker. If this load current is not available, the necessary auxiliary power can be fed in through a 3VL9 000-8AP01 battery power supply or through the 3VL9 000-8AK01 function tester. For communication-capable circuit-breakers the trip unit is supplied with power through COM10. At the output of the electronic overcurrent trip unit module there is a tripping solenoid which trips in the case of overload or shortcircuit.

N G

= Neutral Protection = Neutral conductor protection = Ground Fault = Ground-fault protection

Siemens LV 1 Add-On 10/2006

16/45

16

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
General data
Electronic trip unit VL150 UL (DG frame) to VL1600 UL (PG frame) functional overview

Generator protection

System protection

Starter protection

Setting options L Function Overload protection Ir = In S1) Short-circuit protection (short-time delayed) Isd = Ir ------1.5-10 1.5-10 1.25-10 1.25-10 tsd [s] ------0-0.5 0-0.5 0-0.5 0-0.5 I1) Short-circuit protection (instantaneous) Ii = In 3-6 4-10 7-16 5-10 1.25-11 1.25-11 11 11 1.25-11 1.25-11 G Ground-fault protection Ig = In -----1 -1 -0.4-13)

Trip unit/model

Order No. supplement

KJ KK KL KN GB GD GE GH JH JM

M M M 525 (corresponds to TM) 2) 545 (corresponds to ETU10) 545 (corresponds to ETU12) 545 (corresponds to ETU20) 545 (corresponds to ETU22) 576 (corresponds to LCD ETU 40) 576 (corresponds to LCD ETU 42)

---

--------

------ ---

I I I LI LI LIG LSI LSIG LI, LSI LSIG

----0.4-1 0.4-1 0.4-1 0.4-1 0.4-1 0.4-1

Communication-capable

Ground-fault protection

Solid-state trip unit

Time-lag class (tR)

Number of poles

Phase failure

I2t (ON/OFF)

Trip class (tC)

Thermal-magnetic trip unit

Trip unit/model

16

KJ KK KL KN GB GD GE GH JH JM

M M M 525 (corresponds to TM) 2) 545 (corresponds to ETU10) 545 (corresponds to ETU12) 545 (corresponds to ETU20) 545 (corresponds to ETU22) 576 (corresponds to LCD ETU 40) 576 (corresponds to LCD ETU 42)

---

-----------

--------

-----$ -$ -$/%

3 3 3 3 3 3 3 3 3 3

-----

-----------

----2.5-30 2.5-30 --2.5-30 2.5-30

--- -------

--------

----

--------

Ground-fault protection $ Vectorial summation current formation (4-conductor system) % Direct detection of ground-fault current in the neutral point of the transformer
1) 2) 3)

Depends on size TM up to In = 1600 A tg 0.10.5 s.

16/46

Siemens LV 1 Add-On 10/2006

LCD display

Order No. supplement

Magnetic trip unit

Thermal image

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
General data
Internal accessories (auxiliary switches, undervoltage trip units, shunt trip units) The SENTRON 3VL UL circuit-breakers can be supplied with all the internal accessories (e.g. auxiliary switches, undervoltage trip units or shunt trip units). The available versions can be found in the tables with the Order No. supplements. Fixed mounting, plug-in or withdrawable version The fixed-mounting circuit-breaker is the basic version. This can be converted very easily into a plug-in or withdrawable version with the aid of the appropriate installation kit. This kit contains blade contacts, a trip pin and terminal covers for the plug-in version. The kit for the withdrawable version also contains side panels and a racking mechanism. Even when the masking frame is mounted, the withdraw handle mechanism can still be used with the door closed. Operating mechanisms The basic versions of the SENTRON 3VL UL circuit-breakers are equipped with a toggle lever as an operating mechanism which is also used as a position indicator. As well as "ON" and "OFF", "Tripped" is also indicated. The toggle lever assumes the "tripped" position when the internal tripping mechanism is activated by an overcurrent trip operation, e.g. an overload or short-circuit. The activation of an undervoltage trip unit or shunt trip unit also causes the toggle lever to assume the "tripped" position. The toggle lever must be put into the "OFF/RESET" position before the circuit-breakers can be reclosed. It will then be possible to reset the internal tripping mechanism and reclose the main contacts on the circuit-breaker (see figure). A toggle handle extension is supplied with the SENTRON VL 1200 UL (NG frame) and VL1600 UL (PG frame) circuit-breakers. This accessory must be ordered separately for SENTRON VL400 UL (JG frame) to VL800 UL (MG frame) circuit-breakers, if required. Front-operated rotary operating mechanisms These operating mechanisms have been designed for direct mounting to the circuit-breaker and change the toggle lever movement from a linear to a rotary motion. A leading voltage can be applied to the undervoltage trip unit of a circuit-breaker with leading auxiliary switches which makes the circuit-breaker ready-to-close. Door-coupling rotary operating mechanisms (complete operating mechanisms) Door-coupling rotary operating mechanisms and removable covers are available for circuit-breakers which are installed into control cabinets and distribution boards. These are supplied as complete sets, including an articulated-shaft mechanism. According to the switching position and the "RESET" position, the same applies to the rotary operating mechanisms as to the toggle lever. The position of the operator lever (knob) indicates the status.
OFF RESET ON

This means that all SENTRON 3VL UL circuit-breakers which have these rotary operating mechanisms as well as the corresponding terminal covers can be used as main control switches.

NSE0_ 00038a

Tripped

Toggle lever operating mechanism positions

Rotary operating mechanism secured with a padlock

Motorized operating mechanisms The SENTRON VL150 UL (DG frame) to VL1600 UL (PG frame) circuit-breakers can be equipped with motorized operating mechanism for remote opening and closing during operation. These motorized operating mechanisms for SENTRON VL150 UL (DG frame) to VL800 UL (MG frame) circuit-breakers have a stored-energy feature (for synchronization) with a maximum ON period of tE 100 ms. For SENTRON VL1200 UL (NG-frame) and VL1600 UL (PG frame) circuit-breakers, there are motorized operating mechanisms without a stored-energy feature for remotecontrolled ON and OFF switching. All motorized operating mechanisms are always supplied with a locking device for padlocks. Optional safety locks are also available for motorized operating mechanisms with storedenergy feature. These locking devices can be used to block the operating mechanism electrically and mechanically. All remote-controlled operating mechanisms are equipped with a manual operation option for maintenance purposes. The motorized operating mechanisms with stored-energy feature for VL150 UL (DG frame) to VL800 UL (MG frame) as well as the motorized operating mechanisms for VL1200 UL (NG frame) and VL1600 UL (PG frame) are each equipped inside with a floating signaling contact (NO) for the following functions:

NSE0_00699

- Querying the auto/manual selector switch for VL150 UL


(DG frame) to VL800 UL (MG frame)

- Actuating the mechanical OFF/0 button

Siemens LV 1 Add-On 10/2006

16/47

16

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
General data
Main connections, basic equipment and options

NSE0_00701a NSE0_00700a
N S E 0 _ 0 1 5 4 1

Box terminal (for copper cables or solid/ flexible busbars)

Terminal with screw connection (metric/inch)

Round cable terminal/ multiple feed-in terminal (for Al/Cu cable)

Main connections (see operating instructions for conductor cross-sections)


Circuit-breaker Connection overview and further options Box terminals Screw terminal Round cable terminal/ multiple feed-in terminal inch thread Cu or Al Rear-mounting terminals Cable lug connection Direct connection of busbars is possible

only Cu

with metric thread for flat connector

VL150 UL (DG frame) VL250 UL (FG frame) VL400 UL (JG frame) VL400X UL (LG frame) VL800 UL (MG frame) VL1200 UL (NG frame) VL1600 UL (PG frame) Available -- Not available

-----

-
1)

1)2) 1)2) 1) 1) --

--

Multiple feed-in terminal 2) Round cable terminal also available.

Auxiliary trip units and auxiliary switches Undervoltage trip units, leading auxiliary switches The circuit-breaker cannot be closed if there is no voltage present at the undervoltage trip unit. If voltage is not applied to the release, operation of the circuit-breaker will result in re-tripping. Frequent re-tripping should be avoided because of its adverse effect on the endurance of the circuit-breaker. A leading voltage can be applied to the undervoltage trip unit of a circuit-breaker with leading auxiliary switches which makes the circuit-breaker ready-to-close. For SENTRON 3VL UL circuit-breakers, the leading auxiliary switch can be supplied with the front rotary operating mechanism or complete operating mechanism. For more detailed information, please refer to the selection and ordering data tables for accessories. Shunt trip unit The shunt trip unit is used for remote tripping of the circuitbreaker. The coil of the shunt trip unit is designed for short-time operation only. A coil-trip is implemented internally. It is not permissible to apply a continuous trip command to a shunt trip unit to prevent closing when the circuit-breaker is tripped. A central tap is provided as standard for checking the conductivity of the coil.
VL150 UL (DG frame) VL250 UL (FG frame) VL400 UL (JG frame) VL400X UL (LG frame) VL800 UL (MG frame) VL1200 UL (NG frame) VL1600 UL (PG frame) X2: Left accessory sub-section optionally: Max. 3 HS Max. 3 HS Max. 3 HS Max. 3 HS Max. 4 HS Max. 4 HS Max. 4 HS Max. 4 HS Max. 2 HS + 1 AS Max. 2 HS + 1 AS Max. 2 HS + 1 AS Max. 2 HS + 1 AS Max. 2 HS + 2 AS Max. 2 HS + 2 AS Max. 2 HS + 2 AS Max. 2 HS + 2 AS
U<

X1: Right accessory sub-section optionally: Max. Max. 3 HS 2 HS + 1 AS Max. Max. 3 HS 2 HS + 1 AS Max. Max. 3 HS 2 HS + 1 AS Max. 3 HS Max. 4 HS Max. 4 HS Max. 4 HS Max. 4 HS

16

U<

U<

U<

U<

U<

U<

U<

VL150 UL (DG frame) / VL250 UL (FG frame) with with solid-state overcurrent trip unit (ETU or LCD ETU): Left accessory sub-section is occupied by tripping solenoid
NSE0_01827

Shunt trip unit or underU< voltage trip unit HS an auxiliary switch 1 NO or 1 NC AS an alarm switch 1 NO or 1 NC Note: Maximum 6 switch blocks (HS) per circuit-breaker VL150 UL (DG frame) to VL400X UL (LG frame) Maximum 8 switch blocks (HS) per circuit-breaker VL800 UL (MG frame) to VL1600 UL (PG frame)

Possible complements for the insulated accessory subsections in the SENTRON 3VL UL circuit-breakers Before ordering, use the table above to check whether the required combination of shunt trip units, undervoltage trip units and auxiliary/alarm switches is feasible.

16/48

Siemens LV 1 Add-On 10/2006

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
General data
Auxiliary switches Auxiliary switches (HS) are used for indication and control. The contacts of the auxiliary switch close and open together with the main contacts. Alarm switches The alarm switches (AS) are active when the circuit-breaker has been tripped due to an overcurrent e.g. overload or short-circuit. However, they are also activated if the circuit-breaker has been tripped by a shunt trip unit or undervoltage trip unit. Installation of internal accessories The insulated accessory subsections for installing accessories (auxiliary trip units and auxiliary/alarm switches) have the designations X1, X2 and X4. The equipping of the circuit-breaker with internal accessories and the configuration options for circuit-breakers with auxiliary trip units and auxiliary/alarm switches depend on the mounting position and size of the circuit-breaker (see the illustration "Possible complements for the insulated accessory subsections of the 3VL UL circuit-breakers"). PLC controls The auxiliary and alarm switches can be used to send signals to programmable controllers. These switch blocks are part of the Siemens 3SB3 range. Leading auxiliary switches The leading auxiliary switches OFF to ON or ON to OFF are available as a retrofit set for rotary operating mechanisms.
-T 6

The following measurement methods can be used to detect neutral conductor and ground-fault currents: Vectorial summation current formation (measurement method 1) Ground-fault detection in symmetrically loaded systems The three phase currents are evaluated using the vectorial summation current summation.
L1 L2 L3 PE
NSE0_00685

3VL

Ground-fault detection in asymmetrically loaded systems The neutral conductor current is measured directly. For the 3pole circuit-breakers, this measurement is only evaluated for ground-fault protection. The electronic trip unit determines the ground-fault current for the three phase currents and neutral conductor current by means of vectorial summation current formation.
L 1 L 2 L 3 N P E
N S E 0 _ 0 0 6 8 6 a

3 V L

Function
Current limiting The SENTRON 3VL UL circuit-breakers utilize the design principle of magnetic repulsion of the contacts. The contacts open before the anticipated peak value of the short-circuit current is achieved. The current-limiting effects of the SENTRON 3VL UL circuit-breakers provide effective protection for system components against the thermal and dynamic effects of the short-circuit current in the event of an electrical fault. Ground-fault protection Ground-fault release "G" senses fault currents that flow to ground and that can cause fire in the plant. Several circuit-breakers connected in series can provide graduated discrimination by means of the adjustable delay time.

3-pole circuit-breaker, current transformer in the neutral conductor

Direct detection of the ground-fault current through a current transformer in the grounded neutral point of the transformer (measurement method 2) The current transformer is installed directly in the grounded neutral point of the transformer.
L1 L2 L3 N T6 PE
NSE0_00688

3VL

3-pole circuit-breakers, current transformers in the grounded neutral point of the transformer.

Transformer protection The SENTRON 3VL UL circuit-breakers protect energy distribution systems against overload and short-circuit on the lowvoltage side of the infeed transformer. The resulting requirements with respect to current-based and/or time-based discrimination are reliably fulfilled by the SENTRON 3VL UL circuit-breakers for system protection (equipped with thermal-magnetic (TM) or solid-state overcurrent trip units (ETU or LCD ETU).

Siemens LV 1 Add-On 10/2006

16/49

16

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
General data
Thermal-magnetic overcurrent trip unit Application: System protection TM/model 525, LI/LIN function
NSE0_01828

L I
NSE0_00691

Overload protection, fixed, short-circuit protection, adjustable Ii = 5 to 10 In, for VL150 UL (DG frame) to VL1600 UL (PG frame) Application: Starter protection M, I function

I n = 1600 A Ii 40 C TM ~
7000 Amps 12000 Trip Unit/Disparador 525 7000 Amps 12000 7000 Amps 12000

Ii

Ii

I
N S E 0 _ 0 1 5 3 9

Short-circuit protection, adjustable Ii = 3 to 16 In1), for VL150 UL (DG frame) to VL1200 UL (NG frame)

Solid-state overcurrent trip unit ETU General information: For types VL150 UL No auxiliary voltage for tripping unit required (DG frame) to VL1600 UL All ETUs have a thermal image (PG frame) Flashing green LED indicates faultless operation of microprocessor Application: System protection model 545, LI/LIN function (corresponds to ETU10)
L I
NSE0_00691

Overload status (I > 1.05 IR) is indicated by continuous yellow LED (alarm) Integrated self-test function Female connector for test unit

NSE0_01831
Alarm >1.05

Overload protection IR = 0.4 to 1 In, time-lag class tR = 2.5 to 30 Short-circuit protection (instantaneous) Ii = 1.25 to 11 In1)

X3

100 125 80 150 70 160 175 250 225 200 Amps


I n =250 A ~

Ir

tr
4 2.5 30 Sec.

8 10 14 17

25 20

500 750 375 1000 312 1250 1500 2750 2500 2000 Amps Active

Ii

Trip Unit/Disparador 545

2 250 A LI/LIG - FG/JG

Application: System and generator protection model 545, LSI/LSIN function (corresponds to ETU20)
S I

NSE0_01830
Alarm >1.05

16

Overload protection IR = 0.4 to 1 In, Short-circuit protection (short-time delayed) Isd = 1.5 to 10 IR1), tsd = 0 to 0.5 s, I2t selectable on/off Short-circuit protection (instantaneous) Ii = 11 In (fixed)1) Application: System protection model 545, LIG/LING function (corresponds to ETU12)

X3

100 125 80 150 70 160 175 250

Ir

I sd
2 1.5 10

2.5 3 4 5 6 8 7

t sd Sec.

.1 0 .4

.2 .3

.4 OFF .5

I 2t

Amps 225 200


Trip Unit/Disparador 545 I n =250 A ~

xI r

I 2t .3 .2 .1 ON Active

NSE0_00920

2 250 A LSI/LSIG - FG/JG

NSE0_01831
Alarm >1.05

L G I
NSE0_00693

Overload protection IR = 0.4 to 1 In, time-lag class tR = 2.5 to 30 Short-circuit protection (instantaneous) I = 1.25 to 11 In1) Ground-fault protection: Measurement method 1: (GR) vectorial summation current formation for the currents of the three phases/and neutral conductor (four-conductor systems); IDn = In.

X3

100 125 80 150 70 160 175 250 225 200 Amps


I n =250 A ~

Ir

tr
4 2.5 30 Sec.

8 10 14 17

25 20

500 750 375 1000 312 1250 1500 2750 2500 2000 Amps Active

Ii

Trip Unit/Disparador 545

2 250 A LI/LIG - FG/JG

L S G I
NSE0_00921

Application: System and generator protection model 545, LSIG/LSING function (corresponds to ETU22) Overload protection IR = 0.4 to 1 In, Short-circuit protection (short-time delayed) Isd = 1.5 to 10 IR, tsd = 0 to 0.5 s, I2t selectable on/off Short-circuit protection (instantaneous) Ii = 11 In (fixed)1) Ground-fault protection: Measurement method 1: (GR) vectorial summation current formation for the currents of the three phases/and neutral conductor (four-conductor systems); IDn =In.

NSE0_01830
Alarm >1.05

X3

100 125 80 150 70 160 175 250

Ir

I sd
2 1.5 10

2.5 3 4 5 6 8 7

t sd Sec.

.1 0 .4

.2 .3

.4 OFF .5

I 2t

Amps 225 200


Trip Unit/Disparador 545 I n =250 A ~

xI r

I 2t .3 .2 .1 ON Active

2 250 A LSI/LSIG - FG/JG

1)

Size dependent, see "Selection and Ordering Data".

16/50

Siemens LV 1 Add-On 10/2006

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
General data
Solid-state overcurrent trip unit LCD ETU General information: No auxiliary voltage for tripping unit required Current indicator Illuminated LCD display indicates faultless operation of microprocessor The overload status (I > 105 % IR) is indicated by "overload" on the LCD display Application: System protection model 576, LSI/LSIN functions (corresponds to ETU40)
S I
NSE0_00696

User-friendly, menu-driven setting of protection parameters in absolute ampere values by means of keys Integrated self-test function Female connector for test unit Communication link to PROFIBUS DP is possible.

NSE0_01833

Overload protection IR = 0.4 to 1 In, time-lag class tR = 2.5 to 30 On/off selectable thermal image Short-circuit protection (short-time delayed) Isd = 1.25 to 10 IR1), tsd = 0 to 0.5 s, I2t selectable on/off
X3 816JM

ESC

A= 1157 B= 1164 C= 1160 N= 0

I
NSE0_00944

Short-circuit protection (instantaneous) Ii = 1.25 to 11 In1) Application: System protection model 576, LSIG/LSING function (corresponds to ETU42)

L S G I
NSE0_00697

NSE0_01833

Overload protection IR = 0.4 to 1 x In, time-lag class tR = 2.5 to 30 On/off selectable thermal image Short-circuit protection (short-time delayed) Isd = 1.25 to 10 IR1), tsd = 0 to 0.5 s, I2t selectable on/off Short-circuit protection (instantaneous) Ii = 1.25 to 11 In1) Ground-fault protection: Measurement method 1: (GR) vectorial summation current formation for the currents of the three phases/and neutral conductor (four-conductor systems); IDn = 0.4 to 1 In. Measurement method 2: (GGND) direct detection of ground-fault current by means of current transformer, Ig = 0.4 to 1 In, tg = 0.1 to 0.5 s.
X3 816JM

ESC

A= 1157 B= 1164 C= 1160 N= 0

1)

Size dependent, see "Selection and Ordering Data".

Siemens LV 1 Add-On 10/2006

16/51

16

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
General data

Configuration
Communication Two alternatives are available for communication. An LCD ETU (model 576) is required in addition for the more extensive communication with COM10. It can be switched on and off using an optional motorized operating mechanism.
Data transmission through COM10

Transmittable data
Commands Switch on/off Delete alarm and tripping memory, min./max. measured values and maintenance information Operating statuses ON or OFF status trip position Event signals Tripped signals with tripping current and time stamp Alarm signals with time stamp (e.g. overload, phase unbalance current etc.) Threshold value warning, with time stamp (e.g. phase currents) Measured values Phase currents and neutral conductor current, each with min./max. value and time stamp Parameter values Read and write Maintenance information (e.g. number of tripping operations, number of switching operations) Device identification data Time-of-day synchronization Available Function -- Not available Electronic trip unit version TM ETU -LCD ETU - COM10 module Breaker Data Adapter Breaker Data Adapter Plus

16

Function of the communication components


Transmission of the operating status (ON, OFF, tripped, warnings, causes of tripping, event log) to the PROFIBUS Display of measured values (current only) and parameters in trip unit, change parameters through display Transmission of maximum value of present current in % Transmission of individual present phase currents incl. min./max. and time stamp Transmission of identification data Transmission of switch information on HTML basis locally to a PC Transmission of switch information on HTML basis through Ethernet Read out and adjust protection parameters through PROFIBUS Required Function can optionally be taken over by more than one trip unit. Function can optionally be taken over by one of these modules. -Not necessary for this function, optionally combinable Function not available --

--

--

------

------

16/52

Siemens LV 1 Add-On 10/2006

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
General data
Switching of DC currents The VL150 UL (DG frame) to VL1600 UL (PG frame) circuit-breakers (for system protection with TM, for starter combinations, non-automatic circuit-breakers) can also be used for DC switching and protection applications. The VL150 UL (DG frame) to VL1600 UL (PG frame) circuit-breakers with solid-state trip units (ETU) are not suitable for DC applications. However, the maximum permitted DC voltage for each conducting path needs to be taken into account for DC switching applications.
Recommended connection/Maximum permitted DC voltage Ue Circuit A Circuit B 500 V DC
1 2 L 4 3 6 5 L

For voltages above 250 V for VL150 UL (DG frame) to VL1600 UL (PG frame), a series connection of 2 or 3 conducting paths is required. As the current has to flow through all of the conducting paths, the following connections are recommended in order to satisfy the thermal tripping characteristics. With DC applications, the response values of the instantaneous short-circuit releases ("I" trip units) are increased by 30 to 40 %.

Remarks

For 3-pole circuit-breaker


250 V DC
1 L 2 3L 4
NSE0_01861

2-pole switching (non-grounded system) If there is no possibility of a ground fault, or if every ground fault is rectified immediately (ground-fault monitoring), then the maximum permitted DC voltage is 500 V for both circuits. In the event of a ground fault in circuit A, there must always be 2 conducting paths in series, and 3 conducting paths in series in the event of a ground fault in circuit B.

N S E 0 _ 0 0 7 4 1 a

Technical specifications
Type Max. rated current In Rated insulation voltage Ui only according to IEC 60947-2 Main circuits Auxiliary circuits Rated operational voltage Ue NEMA 50/60 Hz IEC Utilization categories Permissible ambient temperature Operation Storage Permissible load at various ambient temperatures Close to the circuit-breaker, related to the rated current of the circuit-breaker Circuit-breakers for system protection TM/ETU TM/ETU TM/ETU Circuit-breakers for starter combinations and non-automatic circuit-breakers Weights of 3-pole circuit-breakers Basic unit without electronic trip unit Thermal-magnetic overcurrent trip unit Solid-state overcurrent trip unit Basic unit with thermal-magnetic overcurrent trip unit with solid-state overcurrent trip unit Rated short-circuit breaking capacity
1) 2)

VL150 UL DG frame A 150

VL250 UL FG frame 250

VL400 UL JG frame 400

VL400X UL VL800 UL LG frame MG frame 600 800

VL1200 UL VL1600 UL NG frame PG frame 1200 1600

AC AC AC DC1) AC

V 800 V 690 V 600 V 500 V 690 A

800 690 600 500 690 A

800 690 600 500 690 A

800 690 600 500 690 A B 2)

800 690 600 500 690 A B 2) -25 to +70 -40 to +80

800 690 600 500 690 A B 2) -25 to +70 -40 to +80

800 690 600 500 690 A B 2) -25 to +70 -40 to +80

50/60 Hz

C C

-25 to +70 -40 to +80

-25 to +70 -40 to +80

-25 to +70 -40 to +80

-25 to +70 -40 to +80

up to 40 C % 100/100 at 50 C % 93/95 at 60 C % 86/80 up to 40 C % 100 at 50 C % 93 at 60 C % 86 kg 1.5 kg 0.7 kg 0.9 kg 2.2 kg 2.4

100/100 93/95 86/80 100 93 86 1.6 0.7 0.9 2.3 2.5

100/100 93/95 86/80 100 93 86 4.2 1.5 1.7 5.7 5.9

100/100 93/95 86/80 100 93 86 7.8 1.2 1.5 9.0 9.3

--/100 --/95 --/80 100 93 86 14.2 -1.8 -16.0

--/100 --/95 --/80 100 93 86 21 -4.0 -25.0

--/100 --/95 --/80 100 93 86 27.3 -4.0 -31.3

For rated short-circuit breaking capacity see table under "Overview".

Rated DC data apply only for thermal-magnetic overcurrent trip units. On request.

Siemens LV 1 Add-On 10/2006

16/53

16

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
General data
Type Endurance Electrical endurance Max. switching frequency Types of connection Conductor cross-sections Power loss per circuit-breaker at max. rated current System protection System protection for starter combinations or non-automatic circuit-breakers Permissible mounting position1)
9 0
N S E 0 _ 0 0 0 2 6 a

VL150 UL DG frame Operating cycles 20000 Operating cycles 10000 1/h 120

VL250 UL FG frame 20000 10000 120

VL400 UL JG frame 20000 10000 120

VL400X UL VL800 UL LG frame MG frame 10000 5000 60 10000 3000 60

VL1200 UL VL1600 UL NG frame PG frame 3000 1500 30 3000 1500 30

see "Main connections, basic equipment and options", see operating instructions.

TM 0.8-1.0 ETU or LCD ETU

W 15-48 W 40 W 40
9 0

32-80 60 60
9 0

60-175 90 90
3 0

85-230 160 160


2)

-250 250

-210 210

-260 260

3 0 -9 0
N S E 0 _ 0 1 5 4 5 b

N S E _ 0 0 9 2 3 a

Auxiliary and alarm switches


Conventional free-air thermal current Ith Rated making capacity AC Rated operational voltage Rated operational current DC Rated operational voltage Rated operational current Back-up fuse/ miniature circuit-breaker Leading auxiliary switch with rotary operating mechanism Rated thermal current Ith Rated making capacity Rated operational voltage Rated operational current Rated switching capacity, inductive, power factor = 0.7 Rated switching capacity Back-up fuse, quick Position indicator switches Rated thermal current Ith Rated making capacity Rated operational voltage Rated operational current Rated switching capacity, inductive, power factor = 0.7 Rated switching capacity Back-up fuse, quick
1) 2)

A 10 A 10 V 24 AC-12 AC-15 A 10 A 6 V 24 DC-12 DC-13 A 10 A 3

10 10 48 10 6 48 5 1.5

10 10 110 10 6 110 2.5 0.7

10 10 230 10 6 230 1 0.3

10 10 400 10 3

10 10 600 10 1

10 10

A 10 TDz / 10 10 TDz / 10 10 TDz / 10 10 TDz / 10 10 TDz / 10 10 TDz / 10 10 TDz / 10 A 2 2 2 2 2 2 2 A 2 (ind. 0.5) 2 (ind. 0.5) 2 (ind. 0.5) 2 (ind. 0.5) 2 (ind. 0.5) 2 (ind. 0.5) 2 (ind. 0.5) V AC 230 230 230 230 230 230 230 2 2 2 2 2 2 A 2 0.5 0.5 0.5 0.5 0.5 0.5 A 0.5 A A A A V AC A A 2 2 16 16 250 16 4 2 2 16 10 400 10 4 10 10 2 2 2 2 2 2 2 2 2 2

16

A 16 A 16

For VL800 UL (MG frame) to VL1600 UL (PG frame) circuit-breakers with guide frame in lateral mounting position. Adapter set on request. Permissible current load factor 0.9; only with internal accessories.

16/54

Siemens LV 1 Add-On 10/2006

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
General data
Type VL150 UL DG frame VL250 UL FG frame VL400 UL JG frame VL400X UL VL800 UL LG frame MG frame VL1200 UL VL1600 UL NG frame PG frame

Trip units
Group 1: VL150 UL (DG frame) to VL400X UL (LG frame) Undervoltage trip unit Response voltage: Release (circuit-breaker is tripped) Pick-up (circuit-breaker can be closed) Power consumption (continuous duty) at: 50/60 Hz 24 V AC1) 50/60 Hz 110-127 V AC 50/60 Hz 220-250 V AC 50/60 Hz 208 V AC 50/60 Hz 277 V AC 50/60 Hz 380-415 V AC 50/60 Hz 440-480 V AC 50/60 Hz 500-525 V AC 50/60 Hz 600 V AC1) 12 V DC 24 V DC 48 V DC 60 V DC 110 -127 V DC 220-250 V DC Max. opening time Shunt trip unit Response voltage: Pick-up (circuit-breaker is tripped) Power consumption (short time) at: 50/60 Hz 24 V AC 50/60 Hz 48-60 V AC 50/60 Hz 110-127 V AC 50/60 Hz 208-277 V AC 50/60 Hz 380-600 V AC 24 V DC 48-60 V DC 110-127 V DC 220-250 V DC Max. opening time Max. duration of operating voltage
1)

Group 2: VL800 UL (MG frame) to VL1600 UL (PG frame)

V 0.35-0.70 Us V 0.85-1.1 Us VA VA VA VA VA VA VA VA VA 1.4 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0

0.35-0.70 Us 0.85-1.1 Us 1.2 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.5 1.5 1.5 1.5 1.5 1.5 50 Us 0.7-1.1 330 380-460 330-430 520-800 228-750 385 480-720

W 0.8 W 0.8 W 0.8 W 0.8 W 0.8 W 0.8 ms 50 Us V 0.7-1.1 VA VA VA VA VA 310 335-465 470-630 585-1000 180-500

W 360 W 380-590 W 506-680 W 470-580 ms 50 s interrupts automatically, less than 10 ms

50 interrupts automatically, less than 10 ms

On request.

Siemens LV 1 Add-On 10/2006

16/55

16

362-424 418-476

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
General data
Type Motorized operating mechanism Motorized operating mechanism with spring energy store (synchronizable) Motorized operating mechanism Power consumption Rated control supply voltage Us Melting fuse (gG operational class, characteristic slow) Miniature circuit-breakers (MCBs) Operating range Minimum command duration at Us Max. command duration, depends on circuit1) Total make-time Break-time Interval time between OFF and ON commands Interval time between ON and OFF commands Max. permissible switching frequency Motorized operating mechanism with spring energy store (synchronizable) Power consumption Rated control supply voltage Us VA/W 50/60Hz V AC < 100 42-48 / 60 < 100 < 200 < 250 < 250 --------VA/W -50/60Hz V AC -V DC -A -----------------< 250 42-48 / 60 4 < 250 110-127 / 220-250 2 VL150 UL DG frame -x VL250 UL FG frame -x VL400 UL JG frame -x VL400X UL VL800 UL LG frame MG frame -x -x VL1200 UL NG frame x -VL1600 UL PG frame x --

24 / 42-48 / 60 110-127 / 220-250

A -V -ms --

----

----------

----------

----------

4 0.85 -1.1 x Us 50

2 0.85 -1.1 x Us 50

Non-maintained or continuous command s -s -s -s -1/h -------

Non-maintained or continuous command <5 <5 >5 >5 30 <5 <5 >5 >5 30

110-127 / 220-250 110-127 / 220-250 2

V DC 24 / 42-48 / 60 Melting fuse (gG operational class, characteristic slow) Miniature circuit-breakers (MCBs) Operating range Minimum command duration at Us Max. command duration, depends on circuit1) Total make-time Break-time Interval time between OFF and ON commands Interval time between ON and OFF commands Max. permissible switching frequency x Available -- Not available
1)

A 4

16

A 4

--

----------

V 0.85 -1.1 x 0.85 -1.1 x 0.85 -1.1 x 0.85 -1.1 x 0.85 -1.1 x -Us Us Us Us Us ms 50 50 50 50 50 --< 100 <5 >5 >1 60 -----Non-maintained or continuous command ms < 100 s <5 s >5 s >1 1/h 120 < 100 <5 >5 >1 120 < 100 <5 >5 >1 120 < 100 <5 >5 >1 60

Changeover contact also permissible, note Interval times between ON and OFF commands

16/56

Siemens LV 1 Add-On 10/2006

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Project planning aids

Characteristic curves
General information: Tripping characteristic curves of the SENTRON VL150 UL (DG

The indicated tripping values for the inverse-time delayed overcurrent trip units (thermal overload releases, "L" trip units) are mean values taken from the spread of all setting ranges from the cold state and under even load conditions on the conducting paths. The tripping characteristic curves of the instantaneous (electromagnetic) short-circuit releases ("I" trip units) are based on the phase rated current In.
For thermal-magnetic trip units (TM), the following applies:

frame) to VL1600 UL (PG frame) circuit-breakers for generator protection with solid-state overcurrent trip units. The tripping times of the inverse-time delayed overcurrent trip units apply to the non-preloaded (cold) state. In the operating/warm state (after application of a load at the rated current), the tripping times are reduced to approx. 33 %. After a tripping operation due to overcurrent, the tripping times are reduced in accordance with the dynamic tripping response, which means that a cooling time of a few minutes is required before the next motor start. Detailed time/current characteristic curves, current limiting characteristic curves and I2t curves can be ordered from "Technical Assistance" (e-mail: technicalassistance@siemens.com) or downloaded from the following Internet site: http://www.siemens.com/lowvoltage/characteristics

The characteristic curves apply to the cold state; at operating temperature, the tripping times of the thermal trip units are reduced to approximately 25 %. Under normal operating conditions, all three poles of the device must be loaded. The three main conducting paths must be connected in series in order to protect single-phase or DC loads.

Dimensional drawings
VL150 UL (DG frame) and VL250 UL (FG frame), 3- and 4-pole, up to 250 A Circuit-breakers
SENTRON VL150 UL/VL250 UL (DG frame and FG frame) circuit-breaker SENTRON VL150 UL (DG frame) circuit-breaker SENTRON VL250 UL (FG frame) circuit-breaker SENTRON VL150 UL and VL250 UL (DG frame and FG frame) circuitbreaker assembly note

15.5

106.5 90.5 87 81.5

Z Y

Y 5 .5 17.5 35 35 35 6 x 6.2 3 5 3 5 3 5

1 7 .5 6 X 8 .4

4-(250) 2.5-(160)

3 5 (3 P )

1 7 .5

8 8 .5 1 1

88.5

75.5

7 5 .5

174.5

1 7 4 .5

58 31.5

120.5 63.5

1 1 .5

1 8 5 .5

149

11

7 13

24

5 .5

4 19 52.5 104.5 139.5

12 24.5

(8 ) 1 0 4 .5 1 3 9 .5
Y

1 8 5 2 .5

1 3

2 4 .5

7 0 (4 P )

2 X 4 X

1 9 .5

NSE0_01834

N S E 0 _ 0 0 7 7 3

(8 )

1 6 16 32

3 2

Note: The 5.5 mm extension at each end of the SENTRON VL250 UL (FG frame) circuit-breaker only applies when using box terminals or round cable terminals (8).

Siemens LV 1 Add-On 10/2006

16/57

1 3 1 .5

1 4 9

6 5

5 .5 (3 P ) 5 .5 (4 P )

16

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Project planning aids
VL150 UL (DG frame) and VL250 UL (FG frame), 3- and 4-pole, up to 250 A Operating mechanisms
Motorized operating mechanism with spring energy store
1 0 4 .5
Y

1 7 3 (4 )
Y

5 2

8 6 .5
Z

2 5 8

1 4 1 .5 (7 )

(7 ) (7 ) (5 ) 8 8 .5
O N

9 8 .5

O F F

O F F

1 7 1 .5

O N

(7 ) CL
X

6 3 5 8

X
N S E 0 _ 0 0 7 7 4 a

7 4 .5

(1 )

(4 ) 1 - 3 2 2 8 (6 )

4 7 .5 (5 ) 9 5

Front-operated rotary operating mechanism


5 2 1 0 4 .5
Y

(4 ) (2 ) (1 )

1 7 3

8 6 .5
Z

2 0 1 4 0

(2 ) (2 ) 1 7 1 .5
T R IP P E D

(2 ) CL
X

6 2 5 8

T R IP P E D

X X
N S E 0 _ 0 0 7 7 5 a

(5 ) 8 8 .5

9 7 .5

7 4 .5

(4 )
Y

(3 )

4 7 .5

1 - 3 1 2 6 .5 1 4 0 (6 )

(5 ) 9 5

16

(1) Safety locks (2) Front-operated rotary operating mechanism (3) Padlock (4) Masking frame for door cut-out (for circuit-breaker with operating mechanism) (5) Step for cover (6) Outside surface of cabinet door (7) Motorized operating mechanism with spring energy store (8) Terminal insulation

Terminals
Circuit-breaker with rear terminals long and short
1 2 0 .5 1 0 8
Z

1 - 3

1 2 3

1 3 9 (4 P ) 1 0 4 (3 P )
X

3 8

5 2

(8 )

(4) Threaded rear terminals, round stock (long) (5) Threaded rear terminals, round stock (short) (7) Installation level (8) Rear flat connector (long) (9) Rear flat connector (short)

1 0 .8
X

(4 ) B (5 ) M 1 2 x 1 .7 5

1 1 2 5 .5

8 1 .5
Z

3 8 6 6 (7 )

8 1 .5 (7 )

5 1 6 3 1 - 3

(9 )

N S E 0 _ 0 1 8 3 5

Type VL150 UL VL250 UL (DG frame) (FG frame)

A 75.5 75.5

B 149 149

C 101 101

D 199 199

16/58

Siemens LV 1 Add-On 10/2006

1 4

1 4

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Project planning aids
VL150 UL (DG frame) and VL250 UL (FG frame), 3- and 4-pole, up to 250 A Locking device for toggle lever

48,3 60,2

NSE0_01555

35 ,9

27,7

6,1

20,3

34

28,3 30,1

Rear interlocking module


Rear interlocking module for plug-in/withdrawable circuit-breakers, with front connection For more detailed dimensional drawings, see installation instructions for rear interlocking module
35 (3P) 70 (4P) 212,5 17,5 4 x 5,5 Y

Rear interlocking module


38,1
NSE0_01552

22,9
m 3-6 m

233,2 212,6 38,1

Mounting plate, example 1, not included in scope of supply

17,5

98

2 x 4,5 Y X

14

90

NSE0_01549a

19

37,2 44,8

16,5

Type VL150 UL (DG frame), VL250 UL (FG frame)

A 194

Mounting plate, example 2, not included in scope of supply


32 mm x 32 mm x 3 mm x 457 mm

NSE0_01553

3-6

mm

6 x M6

6 x - M6 2,0 Nm

NSE0_01554a

Siemens LV 1 Add-On 10/2006

16/59

16

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Project planning aids
VL150 UL (DG frame) and VL250 UL (FG frame), 3- and 4-pole, up to 250 A Accessories
Circuit-breaker with door-coupling rotary operating mechanism
4 3 9 M A X - 2 2 2 M IN (2 9 1 M IN W IT H (1 0 )) 2 6 7

1 5 7 .5 1 4 4

8 6 .5 Z
N S E 0 _ 0 1 8 3 6

(2 ) 2 2 5 8 2 7 7 M A X - 6 0 M IN (1 2 ) X

2 .5

8 x 8 (2 )

(1 1 ) 2 8

(6 ) 1 .5 - 3

(1 0 )

(7 )

Masking frame for door cut-out for circuit-breaker with toggle lever
1 0 1 .5
Y

5 1

1 - 3 9 (6 )

16

1 3 8 .5

6 1 .5

X
N S E 0 _ 0 0 7 7 7

(4 )

(4 )

9 5 .5

Masking frame for door cut-out for circuit-breaker with operating mechanism
1 7 3
Y

8 6 .5

N S E 0 _ 0 0 7 7 8

(3 )

(2) Door-coupling rotary operating mechanism (3) Masking frame for door cut-out (for circuit-breaker with operating mechanism) (4) Masking frame for door cut-out (for circuit-breaker with toggle lever) (6) Outside surface of cabinet door (7) Installation level (10) Support bracket (11) Extension (12) Center line of operating shaft

16/60

Siemens LV 1 Add-On 10/2006

7 4 .5

1 7 1 .5

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Project planning aids
VL150 UL (DG frame) and VL250 UL (FG frame), 3- and 4-pole, up to 250 A Door cut-outs
Door cut-out for toggle lever (without masking frame)
Y X

Door cut-out Door cut-out for front-operated rotary operating mechanism and motorized operating mechanism Door-coupling rotary operating mechanism with spring energy store (without masking frame)
9 7 4 8 .5 4 x 4 .5 Y X 3

N S E 0 _ 0 0 7 7 9 a

9 0 .5

1 8

4 2 -5 0 Y
N S E 0 _ 0 0 7 8 0

3 6

N S E 0 _ 0 0 7 8 1 a

6 5

3 2 .5

Door cut-out for toggle lever (with masking frame)

Door cut-out for front-operated rotary operating mechanism, motorized operating mechanism with spring energy store and extended escutcheon (with masking frame)
6 X 5 .5 Y 1 6 0 .5 8 0

Hole pattern and cut-out for plug-in base with rear connecting bars

4 X 5 .5 Y

9 2 .5

7 0 (4 P ) - 3 5 (3 P )

4 6

1 7 .5 4 X 5 .5

5 5

5 2

8 1

7 9 .5

6 5
1 4 4 .5 X

6 8

3 2 .5

5 9

2 .5

3 4

1 0 5

N S E 0 _ 0 0 7 8 2

1 2 7

9 8

1 5 9

1 1

1 4

1 9 4

1 3 5 (4 P ) - 1 0 0 (3 P ) 3 8
N S E 0 _ 0 0 5 6 7 a

4 1 .5 8 3
N S E 0 _ 0 0 7 8 3 a

7 3 .5 1 2 1 4 7 .5

7 0

3 6 .5

5 0

3 8

Hole pattern and cut-out for rear terminals


N S E 0 _ 0 0 7 8 5 a

1 0 5 (4 P ) 7 0 (3 P ) 3 5 1 3 Y

Door hinge point


Y D

8 X 6 X

2 6 (4 P ) 2 6 (3 P )

Note: A minimum distance between reference point Y and the door hinge is required for the door cut-outs.

X A D

N S E 0 _ 0 0 7 8 6

D > A from table + (P x 5)


2 X 4 X 5 .5 (3 P ) 5 .5 (4 P ) 7 0 (4 P ) 1 7 .5 3 5 (3 P )

Combination Type A B 65 65 C D Circuit-breaker only Circuit-breaker + plug-in base + motorized operating mechanism with spring energy store Circuit-breaker + plug-in base + front-operated rotary operating mechanism Circuit-breaker + withdrawable version VL150 UL (DG frame) 131.5 VL250 UL (FG frame) 131.5 75.5 149 75.5 149

A 100 100

200

200

Siemens LV 1 Add-On 10/2006

16/61

16

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Project planning aids
VL150 UL (DG frame) and VL250 UL (FG frame), 3- and 4-pole, up to 250 A Plug-in bases and accessories
Plug-in base with front connecting bars
Z 174 165.5 78.5 73.5 38.5 (9) 133.5 (4P) 99 (3P) 49.5 35 Y

Hole pattern for plug-in base with front connecting bars

(9)

(8)

70 (4P) 35 (3P) 17.5 216 4x 5.5 Y 98 X 254 194 12.5 25.5


NSE0_01837

X 429.5

(4) 28.5

(9) (8)

16

(7)

Plug-in base with rear flat bar connection


165.5 78.5 61.5 Z 133.5 (4P) 99 (3P) 49.5 (1) Y

(2)

53

113.5

103.5

223.5

(2)
NSE0_01838

(1)

(3) (7) 1-3 58 Z (7) 45.5 12.5

56

1-3

128.5

(6)

(1) Plug-in base with rear terminal covers (2) Plug-in base (3) Plug-in base with rear flat bar connection (4) Masking frame for door cut-out (for circuit-breaker with toggle lever)
70

35

(6) Outside surface of cabinet door


105

(7) Installation level (8) Plug-in base with front connecting bars
25.5

(9) Plug-in base with terminal covers on the front * Extended middle phase with 3-pole circuit-breaker

(2)

(3)

8 x 11

109.5 * )

16/62

Siemens LV 1 Add-On 10/2006

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Project planning aids
VL150 UL (DG frame) and VL250 UL (FG frame), 3- and 4-pole, up to 250 A Withdrawable version and accessories
SENTRON VL150 UL (DG frame) and VL250 UL (FG frame) circuit-breakers with motorized operating mechanism with spring energy store (connected position)
NSE0_01839

SENTRON VL150 UL (DG frame) and VL250 UL (FG frame) circuit-breakers with motorized operating mechanism with spring energy store (disconnected position)
364 57 114 (4) (2) (3) 228 201
NSE0_01840

Z 337 30 141.5 (4) (3) 307 228 (2) 61.5 (1)

Z 307 61.5 (1)

(8) C L X

(8) C L X

14

14

1-3

(11)

1-3

(11)

(10) (6) (7)

(6)

(10) (7)

SENTRON VL150 UL (DG frame) and VL250 UL (FG frame) circuit-breakers with front-operated rotary operating mechanism (connected position)
NSE0_01841

SENTRON VL150 UL (DG frame) and VL250 UL (FG frame) circuit-breakers with front-operated rotary operating mechanism (disconnected position)
307 40.5 18 246 126.5 99 (3) (2)
NSE0_01842

Z 280 13 45 218.5 126.5 (2) 205.5 61.5 (1)

Z 205.5 61.5 (1)

(3) (9) C L X 14 (9) C L X

14

(4) (11) 1-3 (6) (10) (7)

(4)

1-3 (6) (10) (7)

(1) Plug-in base with terminal covers (2) Plug-in base (3) Circuit-breaker (4) Masking frame for door cut-out (for circuit-breaker with operating mechanism) (6) Outside surface of cabinet door (7) Installation level (8) Motorized operating mechanism with spring energy store (9) Front-operated rotary operating mechanism (10) Locking device for racking mechanism (11) Racking mechanism

Siemens LV 1 Add-On 10/2006

16/63

16

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Project planning aids
VL150 UL (DG frame) and VL250 UL (FG frame), 3- and 4-pole, up to 250 A Withdrawable version and accessories
SENTRON VL150 UL (DG frame) and VL250 UL (FG frame) circuit-breakers SENTRON VL150 UL (DG frame) and VL250 UL (FG frame) with extended escutcheon (connected position) circuit-breakers with extended escutcheon (disconnected position)
NSE0_01843

218 13 45 (3) (4) (8) C L 205.5 126.5 (2)

245.5 40 18 (3) (2) (8) C L X 126.5 99 205.5 61.5 (1)

61.5 (1)

NSE0_01844

X 14

(6) 1-3

(11) (6) (10) (7) 1-3 (10) (11) (7)

Dimensions of extended escutcheon


1 0 2 .5 (8 ) 5 1 .5 Y (8 )

(1) Plug-in base with terminal covers (2) Plug-in base (3) Circuit-breaker (4) Masking frame for door cut-out (for circuit-breaker with operating mechanism) (6) Outside surface of cabinet door (7) Installation level

9 6 .5 (8 )

16

X
3 4 .5

(8) Extended escutcheon (10) Locking device for racking mechanism (11) Racking mechanism

N S E 0 _ 0 1 1 7 8 a

(4 )

Dimensions of withdrawable version


1 7 3 Y
N S E 0 _ 0 1 1 7 9

8 6 .5

1 7 1 .5

7 4 .5

(4 ) (1 0 ) + (2 ) 1 5 2 .5 (3 P ) 1 8 7 (4 P )

7 8 (1 1 ) 8 5

16/64

Siemens LV 1 Add-On 10/2006

5 6 (1 1 )

14

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Project planning aids
VL400 UL (JG frame) and VL400X UL (LG frame), 3- and 4-pole, up to 600 A Circuit-breaker
SENTRON VL400 UL (JG frame) and VL400X UL (LG frame) circuit-breakers
163.5 138.5 115 106.5 101.5

Circuit-breaker installation instructions

44.5 Z 32 44.5 44.5


Y

Y 8.3 (JG-Frame)
10.7 (LG-Frame)

89 (4P) 22

44

44.5 150.5 118.5 134.5 215.5


NSE0_01845

67.5 82.5 41.5

279.5

150

(9) 46.5

15

5 16.5 139 (3P) 183.5 (4P)

24.5 33 69.5

32

4 x 7.1

30.5 61.5

Motorized operating mechanism with spring energy store


2 2 4 (4 ) (7 ) 1 -3 Z Y (4 ) 4 5 1 3 0 Y (7 )

247.5

2 3 9 .5

2 5

X
I O

X
I O

3 4 .5

N S E 0 _ 0 0 7 8 8 b

(1 ) 1 2 2 .5 (8 ) 1 1 4 .5 2 1 8 .5

1 0 0

6 9 .5 1 3 9

Front-operated rotary operating mechanism


(6 ) 7 9 .5

4 6 .5
1 4 .5

(4 )

4 5 (1 )

5 4

1 5 8 .5

1 5 0

(1) Safety lock


(2 )

(2) Front-operated rotary operating mechanism (3) Padlock (4) Masking frame for door cut-out (for circuit-breaker with operating mechanism) (6) Outside surface of cabinet door (7) Motorized operating mechanism with spring energy store (8) Installation level

(2 )
I

2 3 9 .5

1 0 0

(3 )

(4 ) 1 - 3 1 4 8 (8 )

N S E 0 _ 0 0 7 8 9 b

5 4 .5

1 5 9

X X

1 5 0

1 1 4 .5 2 1 8 .5

1 3 9

6 9 .5

(9) Toggle lever extension

Siemens LV 1 Add-On 10/2006

16/65

16

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Project planning aids
VL400 UL (JG frame) and VL400X UL (LG frame), 3- and 4-pole, up to 600 A Terminals
Only for VL400 UL (JG frame)
101.5
Z

131.5 (JG-Frame) 138 * ) (LG-Frame)

171.5 157 (8) (8)/ (9)

182 (4P) 137.5 (3P)


Y

68.5

40.5 118.5 (4)


X

118.5

28 min. 28

215.5

215.5

(5) (9)
NSE0_01846

1-5

73 (JG-Frame) 82 * ) (LG-Frame)

98.5 113 (7) 1-5

M12x1.75

34

(4) Rear terminal (long) (5) Rear terminal (short) (7) Installation level (8) Rear flat connector (long, VL400 UL, JG frame) (9) Rear flat connector (short, VL400 UL, JG frame) * Rear terminals for VL400X UL (LG frame) are flat connectors. For more detailed dimensional drawings, see installation instructions for rear terminals.

Rear interlocking module

16

Rear interlocking module for plug-in/withdrawable circuit-breakers for front connection For more detailed dimensional drawings see installation instructions for rear interlocking module
Y 89 (4P) 44,5 (3P) 22 (3P+4P) 381 38 2 x 0,9 X 3-6 Y

Type VL400 UL (JG frame) and VL400X UL (LG frame)

316

11 14.5

168.5

A 289

155

149,5 22 31 25

29,5

4 x 7,1

Rear interlocking module


NSE0_01564

32,8 22,9

431,8 69,9 4 x 8,3 38,1

59,8

369,4 409,1

3,8

16/66

Siemens LV 1 Add-On 10/2006

NSE0_01562

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Project planning aids
VL400 UL (JG frame) and VL400X UL (LG frame), 3- and 4-pole, up to 600 A Locking device for toggle lever
J E F G
A G D B H C K

Type 3VL9 4 3VL9 6 3VL9 8

a 20.3 21.6 21.6

d 52.8 62.0 96.5

e 49.3 50.4 77.2

f 49.8 46.5 69.1

NSE0_01556

g 6.35 12.9 11.7

h 6.3 8.9 5.1

I 11.2 8.6 24.8

k 58.5 72.2 90.0

80.3 57.4 79.8 71.1 110.5 88.9

Accessories
Plug-in base for door-coupling rotary operating mechanism
1 0 1 4 9 0 M A X - 2 3 0 M IN (3 1 2 M IN W IT H (1 1 )) 3 0 0 M A X - 6 0 M IN

1 8 6 .5 1 6 2 .5 1 0 1 .5 Z

(3 ) 1 2 6 .5 (9 )

N S E 0 _ 0 1 8 4 7

(1 2 ) (9 ) 1 2 x 1 2 (1 1 ) 4 0

(9 )

(6 )

2 2 .5

2 .5

(7 )

Masking frame for door cut-out for circuit-breaker with toggle lever
1 2 0 1 0 6 .5 Z Y

(1 0 )

(1 0 )

O N

X X

(3) Circuit-breaker
1 3 8 .5

(6) Outside surface of cabinet door (7) Installation level (9) Door-coupling rotary operating mechanism (10) Masking frame for door cut-out (for circuit-breaker with toggle lever) (11) Support bracket

O F F

N S E 0 _ 0 0 7 9 1

7 7

5 1 (6 ) 1 - 3 (7 ) 1 0 2

(12) Center line of operating shaft

Siemens LV 1 Add-On 10/2006

16/67

16

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Project planning aids
VL400 UL (JG frame) and VL400X UL (LG frame), 3- and 4-pole, up to 600 A Door cut-outs
Door cut-out for toggle lever operating mechanism Door cut-out for front-operated rotary operating Door cut-out (without masking frame) mechanism and motorized operating mechanism Door-coupling rotary operating mechanism with spring energy store (without masking frame)
Y Y X X 6 4 Y

8 7

1 0 1

2 .5
8 8 7 4 4 4 x 4 4 .5 (3 P ) 8 9 (4 P ) 7 .1 2 2

4 3 .5

1 5 2 .5

N S E 0 _ 0 0 7 9 2 a

X 6 5 3 2 .5
N S E 0 _ 0 0 7 9 3

6 6 1 3 2 .5

Door cut-out for toggle lever operating mechanism Door cut-out for front-operated rotary operating Hole pattern and cut-out for plug-in base (with masking frame) mechanism, motorized operating mechanism with with rear flat connecting bars spring energy store and extended escutcheon (with masking frame)
9 2 .5 4 6 .5

2 0 6
4 x 5 .5

Y
5 5 .5

1 0 8

6 x

5 .5
4 X

1 9 .5

X
N S E 0 _ 0 0 7 9 5 b

1 2 1 .5

1 1 3 .5

5 2

1 5 5 .5

1 2 7

1 0 5

N S E 0 _ 0 0 7 9 4 b

4 4
5 .5

8 8
2 2 6 .5 8 0 .5 5 4 3 8 6 4 .5 1 2 9 (3 P ) 1 7 3 .5 (4 P ) 3 8
N S B 0 _ 0 0 7 9 7 b

1 9 4

8 1 .5

4 0 .5
N S E 0 _ 0 0 7 9 6 b

16

1 7 5

8 7 1 0 5 .5

1 4

Hole pattern and cut-out for rear-mounting terminals


P 133.5 (4P) 4 x 7.1 44.5 44.5

Door hinge point


Y D

Note: A minimum distance between reference point Y and the door hinge is required for the door cut-outs.

134.5

118.5

247.5

215.5

N S E 0 _ 0 0 7 8 6

D > A from table + (P x 5)


6 x 36.5 (3P) 8 x 36.5 (4P)

NSE0_01848

22 44.5 89 (4P)

Combination Circuit-breaker only Circuit-breaker + plug-in base + motorized operating mechanism with stored-energy feature Circuit-breaker + plug-in base + front-operated rotary operating mechanism Circuit-breaker + withdrawable version

A 150 150

200

200

16/68

Siemens LV 1 Add-On 10/2006

2 8 9

8 6

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Project planning aids
VL400 UL (JG frame) and VL400X UL (LG frame), 3- and 4-pole, up to 600 A Plug-in bases and accessories
Z 210 (9) 103.5 85.5 42.5 44.5 173 (4P) 129 (3P) 64.5 Y 44.5 22

Hole pattern for plug-in base with front connecting bars

9.5 (2)

(8)

11

44.5 (3P) 89 (4P) 22

285 262

4 x 7.1 Y 190 155.5 358 (9) 44.5 44.5 44.5 503 289 X

548.5

1-3 25.5

(8) (7)

NSE0_01849

12.5

(6)

Z 210 (1) 103.5 85.5 (1)

173 (4P) 129 (3P) 64.5 Y

9.5

68 114.5

321.5 (2)

171.5

176

(2) (6) (3)

1-3 (7) 46.5 (2) 12.5

NSE0_01850

44.5 44.5

44.5

(1) Plug-in base with rear terminal covers (2) Plug-in base (3) Plug-in base with rear flat connecting bars (6) Outside surface of cabinet door (7) Installation level (8) Plug-in base with front connecting bars (9) Plug-in base with terminal covers on the front * Extended middle phase with 3-pole circuit-breaker

11

2-6 107.5* )

44.5 25.5 89 133.5

(3)

330 (1)

Siemens LV 1 Add-On 10/2006

16/69

16

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Project planning aids
VL400 UL (JG frame) and VL400X UL (LG frame), 3- and 4-pole, up to 600 A Plug-in bases and accessories
Plug-in base for front-operated rotary operating mechanism (connected position)
1 4 8 2 5 1 .5
Z

Plug-in base for front-operated rotary operating mechanism (disconnected position)


1 4 8 2 5 1 .5 2 7
Z

4 6 .5

1 9 .5

(4 )
N S E 0 _ 0 1 8 5 1

(4 )
N S E 0 _ 0 1 8 5 2

(6 )

(6 )
1 - 3

1 - 3

(1 )

(7 )

(1 )

(7 )

Plug-in base for motorized operating mechanism with spring energy store (connected position)
361.5 327.5 224 122.5
Z

Plug-in base for motorized operating mechanism with spring energy store (disconnected position)
388.5 327.5 224 197 95.5 27
Z

(8) (8)

16

(4)
NSE0_01853

(4) (11)
NSE0_01854

(6) 1-3 (10) (1) (7)

(11) (6) 1-3 (10) (1) (7)

(1) Plug-in base with terminal covers (4) Masking frame for door cut-out (for circuit-breaker with operating mechanism) (6) Outside surface of cabinet door (7) Installation level (8) Motorized operating mechanism with spring energy store (9) Front-operated rotary operating mechanism (10) Locking device for racking mechanism (11) Racking mechanism

16/70

Siemens LV 1 Add-On 10/2006

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Project planning aids
VL400 UL (JG frame) and VL400X UL (LG frame), 3- and 4-pole, up to 600 A Plug-in bases and accessories
Plug-in base for extended escutcheon (connected position)
262.5 251.5 148 46.5 Z 148 19.5

Plug-in base for extended escutcheon (disconnected position)


289.5 251.5 27 Z

(8)

(8)

(4)
NSE0_01855

(4) (11) (6) 1-3 (10) (1) (7)


NSE0_01856

(11) (6) 1-3 (10) (1) (7)

Extended escutcheon mounted on withdrawable version


2 1 8 .5 (4 ) 1 1 4 .5 (4 )

2 3 9 .5 (4 )

O N I

1 0 0

O F F

8 0 .5 (1 1 )

(1 1 )
N S E 0 _ 0 0 8 7 5 a

Y 1 0 5 .5 (1 1 ) 2 5 2 .5 (4 P ) 2 0 8 (3 P )

Locking devices for racking mechanism


(1) Plug-in base with terminal covers (4) Masking frame for door cut-out (for circuit-breaker with operating mechanism) (6) Outside surface of cabinet door (7) Installation level (8) Extended escutcheon (10) Locking device for racking mechanism (11) Racking mechanism

1 6 1

Siemens LV 1 Add-On 10/2006

16/71

16

(1 0 )

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Project planning aids
VL800 UL (MG frame), 3- and 4-pole, up to 800 A Circuit-breaker
SENTRON VL800 UL (MG frame) circuit-breaker
1 7 6 .5 1 5 1 .5 1 2 8 1 1 9 1 1 4 .5
Z

Circuit-breaker installation instructions


Y Y

6 3 .5 (4 P ) 5 8 4 2

6 3 .5

6 3 .5

9 5

(4 P ) 3 1 .5

1 6

2 1 4 .5

1 7 2 .5

6 7 .5 8 2 .5 4 1 .5

4 0 6 .5

3 2 2 .5 3 3 3 .5

1 5 0

(9 ) 3 6 .5

1 6 1 7 .5 3 3 .5

4 2

5 8

5 0

1 9 0 (3 P ) 2 5 3 .5 (4 P )
Y

9 5

4 X

7 .1

3 1 .5

3 7

7 4

Operating mechanisms
Motorized operating mechanism with spring energy store
2 3 6 .5
Z Y

N S E 0 _ 0 0 8 1 5 a

9 4 .5 (4 )

1 8 9
Y

16

(6 )

(7 ) 2 4 8 1 7 2
O N /O F F

X
X

(1 )
O N

1 6 4 (5 )

(7 ) (4 ) 3 5 1 1 7 .5 1 - 3 (8 )
N S E 0 _ 0 0 8 1 6 a

2 6 8 .5

1 3 9 .5 9 0 .5 1 8 0 .5 (5 )

Front-operated rotary operating mechanism


Z

1 0 0

(6 ) 8 6 1 4 .5 (2 )

1 6 1

9 4 .5

1 8 9
Y

1 1 3 .5

1 0 9

2 4 7 .5

1 3 4 .5

(1) Safety lock


Y

(1 )

(4 )

(2) Front-operated rotary operating mechanism (3) Padlock (4) Masking frame for door cut-out (for circuit-breaker with operating mechanism) (5) Step for cover (6) Outside surface of cabinet door (7) Motorized operating mechanism with spring energy store (8) Installation level (9) Toggle lever extension
1 1 3 .5 1 7 2 9 0 .5 1 8 0 .5 (5 )

(2 ) 1 6 4 (5 ) 1 0 9
X

(4 ) 1 - 3 2 6 8 .5

1 3 9 .5

(8 )

16/72

Siemens LV 1 Add-On 10/2006

N S E 0 _ 0 0 8 1 7 a

1 3

1 0 0

(3 )

2 4 8

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Project planning aids
VL800 UL (MG frame), 3- and 4-pole, up to 800 A Withdrawable versions
Withdrawable version with front-operated rotary operating mechanism Insert position
4 2 0 (1 ) 3 4 8 .5 (1 ) 3 3 4 2 8 7 .5 (1 ) 1 6

Withdrawable version with front-operated rotary operating mechanism Withdraw position


3 3 4 1 6
Z

3 3 > 3

Z 3 3 > 3

2 4 2 .5

2 4 2 .5
X

5 1 4

(2 ) (3 )

(3 ) 1 -3

2 7 1 .5

(2 )

1 -3

N S E 0 _ 0 1 0 4 7

> 3

N S E 0 _ 0 1 0 4 6

8 7 3 1 9 (5 ) 3 8 0 (5 ) 4 5 1 .5 (5 )

8 7

3 6

> 3

8 7

8 7

3 6

(4 )

Insert position
4 4 4 .5 (1 ) 4 0 9 .5 2 8 7 .5 (1 )

Withdraw position
Z
6 2 > 3 1 3 .5

4 0 9 .5 > 3

Z 6 2 1 3 .5

6 3 .5

1 6 2

3 0 2

6 3 .5 2 7 1 .5

(2 )

1 -3
1 0 0

1 -3
N S E 0 _ 0 1 0 4 8

> 3

(3 )

N S E 0 _ 0 1 0 4 9

8 7 3 1 9 (5 ) 4 7 6 (5 )

8 7

3 6

(4 )

> 3

(4 )
8 7 8 7 3 6

(1) Connected position (2) Masking frame for door cut-out (3) Outside surface of cabinet door (4) Installation level (5) Disconnected position

1 0 0

(3 )

Siemens LV 1 Add-On 10/2006

2 7 1 .5

(2 )

3 0 2

1 6 2

6 3 .5

6 3 .5

16/73

16

Withdrawable version with motorized operating mechanism with spring energy store

Withdrawable version with motorized operating mechanism with spring energy store

2 7 1 .5
(4 )

5 1 4

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Project planning aids
VL800 UL (MG frame), 3- and 4-pole, up to 800 A
Withdrawable version with extended escutcheon (without masking frame) Insert position
N S E 0 _ 0 1 0 5 0

Withdrawable version with extended escutcheon (without masking frame) Withdraw position

3 3 4 2 8 7 .5 (1 )

N S E 0 _ 0 1 0 5 1

3 4 5 (1 )

3 3 4 Z

X X (2 ) (3 ) (2 ) (3 ) 1 -3 8 7 3 1 9 (5 ) 3 7 6 .5 (5 ) 8 7 3 6 (4 ) 1 -3

8 7

8 7

3 6

(4 )

(1) Connected position (2) Masking frame for door cut-out (3) Outside surface of cabinet door (4) Installation level (5) Disconnected position

16

16/74

Siemens LV 1 Add-On 10/2006

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Project planning aids
VL800 UL (MG frame), 3- and 4-pole, up to 800 A Withdrawable versions
3 7 3 (4 P ) 2 9 7 (3 P ) 7 6 (4 P ) 7 6 1 5 5 .5 7 6 6 .5

3 0 4 .5

2 2 3

1 1 9 .5

1 9 .5

1 5 9 X

5 1 4

4 2 4

5 0 .5
Y
1 6 6

3 9 5 .5 (4 P ) 3 1 9 .5 (3 P )

1 7 4

8 7

3 6

2 7 1 .5
Z

N S E 0 _ 0 1 0 5 2 a

Terminals
Z

119 97.5 33.5

63.5 (4P)

(7) Installation level

63.5

63.5

286

279

551.5

51 (7)

25

NSE0_01857

536

9.5

13

25.5

485

253.5

Siemens LV 1 Add-On 10/2006

16/75

16

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Project planning aids
VL800 UL (MG frame), 3- and 4-pole, up to 800 A Interlocks Locking device for toggle lever
Type a b c d e f g h I 8.6 k 72.2
J G F
NSE0_01556

3VL9 4 20.3 3VL9 6 21.6

80.3 57.4 52.8 49.3 49.8 6.35 6.3 79.8 71.1 62.0 50.4 46.5 12.9 8.9

11.2 58.5 24.8 90.0

3VL9 8 21.6 110.5 88.9 96.5 77.2 69.1 11.7 5.1

G D B H C K

Rear interlocking module


Rear interlocking module 3-pole circuit-breaker
32,8 22,9
431,8 317,5 4 x 8,3 38,2

For more detailed dimensional drawings, see installation instructions for rear interlocking module

NSE0_01565

59,8

369,4 409,1

3,8

16
Rear interlocking module 4-pole circuit-breaker
571,5
NSE0_01571

89,4 63,5

55,4

9,5

203,2

45,5

Rear interlocking module

NSE0_01570

169 381 432

(152,5 with withdrawable unit)

16/76

Siemens LV 1 Add-On 10/2006

70

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Project planning aids
VL800 UL (MG frame), 3- and 4-pole, up to 800 A Accessories
Door-coupling rotary operating mechanism
1 0 1 5 0 3 M A X - 2 6 3 M IN (5 0 3 M A X - 3 3 0 M IN W IT H (1 2 ))

1 9 9 .5 1 7 9 .5 1 1 4 .5

1 - 3 Z (3 ) (9 ) (6 ) 3 0 0 M A X - 6 0 M IN (3 0 0 M A X - 1 3 0 M IN W IT H (1 3 ) C X L (9 ) 1 2 x 1 2 (1 2 ) 4 0 2 2 .5 (7 ) (1 2 ))

(9 )

Masking frame for door cut-out for circuit-breaker with toggle lever
1 3 2 .5 1 1 9
Z Y

0 .5

N S E 0 _ 0 1 8 5 8

Masking frame for door cut-out for circuit-breaker with operating mechanism
Y

(1 1 )

9 5 .5

1 7 5 .5

(6 )
N S E 0 _ 0 0 8 0 0 a

1 3 9 .5 7 0 .5 2 6 8 .5

1 - 3

(7 )

1 4 0 .5

Toggle handle extension


1 7 6 .5 (4 ) 1 5 1 .5
Z

(4 )

(3) Circuit-breaker (4) Toggle handle extension (6) Outside surface of cabinet door (7) Installation level (9) Door-coupling rotary operating mechanism (10) Masking frame for door cut-out (for circuit-breaker with toggle lever)
N S E 0 _ 0 0 8 2 0 a

3 4 .5

4 3 (4 )

(11) Masking frame for door cut-out (for circuit-breaker with toggle lever) (12) Support bracket (13) Center line of operating shaft
(7 )

N S E 0 _ 0 0 8 1 9

1 0 0

Siemens LV 1 Add-On 10/2006

16/77

16

(1 0 )

(1 0 )
X

2 4 8

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Project planning aids
VL800 UL (MG frame), 3- and 4-pole, up to 800 A Door cut-outs
Door cut-out Door-coupling rotary operating mechanism
Y

Door cut-out for toggle lever (without masking frame)


Y
N S E 0 _ 0 0 8 2 2 a

6 4 7
X

4 x

5 .5
X

8 8

N S E 0 _ 0 0 8 2 1 a

0 .5

3 9

4 4

7 8

8 8

4 4

Door cut-out for front-operated rotary operating mechanism, motorized operating mechanism with spring energy store and extended escutcheon (without masking frame)
Y

Door cut-out for toggle lever (with masking frame)


1 2 9 .5
Y

4 3 .5 6 5 4 X 7 1 5 .5 7 3 .5
X

1 6 7

X
N S E 0 _ 0 0 8 2 3 a

1 1 1

8 7

1 8 4 .5

9 2
N S E 0 _ 0 0 8 2 4

1 6 4

1 2 2

6 1

Door cut-out for front-operated rotary operating mechanism, motorized operating mechanism with spring energy store and extended escutcheon (with masking frame)
2 5 6
Y

1 3 3

6 X

5 .5

16

1 1 7 .5

1 5 9
N S E 0 _ 0 0 8 2 5 a

1 3 1 1 1 3 2 2 6

5 0 .5

2 2 2 2 3 5

2 0 9

1 4 1 .5

1 3 2

1 1 (1 ) 1 4

(1) Withdrawable version only

Door hinge point


Y D

Note: A minimum distance between reference point Y and the door hinge is required for the door cut-outs.

N S E 0 _ 0 0 7 8 6

D > A from table + (P x 5)

Combination Circuit-breaker only Circuit-breaker + plug-in base + motorized operating mechanism with stored-energy feature Circuit-breaker + plug-in base + front-operated rotary operating mechanism Circuit-breaker + withdrawable version

A 150 150

200

200

16/78

Siemens LV 1 Add-On 10/2006

1 4 2

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Project planning aids
VL1200 UL (NG frame) and VL1600 UL (PG frame), 3- and 4-pole, up to 1600 A Circuit-breaker
SENTRON VL1200 UL (NG frame) circuit-breaker
2 0 9
Y Z

Circuit-breaker installation instructions

3 7 .5

1 3 .5 3 7 .5

7 6 (4 P )

7 6

7 6

5 3 .5

1 7 1 5 1 5 3 6 7

4 2 .5 .5 1 9 1 1 4 .5 (4 P )
Y

3 8

2 2 2 1 8 4 .5

(1 ) 1 9 9 .5
O N

7 6

3 3 2

5 9 .5

4 0 6 .5

O F F

1 9 0 .5

1 1 9

N S E 0 _ 0 0 8 2 7 c

5 3 6 1

2 2 8 .5 (3 P ) 3 0 5 (4 P ) 4 8 .5 9 7
Y

3 3 3 .5

SENTRON VL1600 UL (PG frame) circuit-breaker


Y

Circuit-breaker installation instructions


1 4 3
Z

2 0

7 6 (4 P )

7 6

7 6

6 0

3 0

1 3

1 6

3 6 .5
Y

1 1 4 .5 (4 P )

3 8 (3 P )

3 0 7

3 1 4 .5

2 4 7

(1 ) 1 9 9 .5

O N

5 3 7

5 7 7

O F F

5 9 1 .5

3 8 4 0
N S E 0 _ 0 0 8 2 8 a

3 8

4 x

2 2

7 6

3 8

3 8

1 6 3 6 .5

(1) Toggle handle extension

3 6 2

I I

Siemens LV 1 Add-On 10/2006

16/79

16

2 2

1 1 4 .5

8 .9

1 9 .5 1 7 .5

3 7 .5 5 5

1 6 1 .5

3 8

3 8

4 x

3 6 2

I I

X X

5 2

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Project planning aids
VL1200 UL (NG frame) and VL1600 UL (PG frame), 3- and 4-pole, up to 1600 A Operating mechanisms
Motorized operating mechanism
3 4 1 3 3 1
Z

2 2 7 (2 )
Y

1 1 3 .5 (1 )

1 3 (2 )

1 3 4

(1 ) (4 ) 1 5 2 .5
N S E 0 _ 0 0 8 2 9 b

(6 ) 1 6 1

2 9 5 (5 )

3 1 0

Front-operated rotary operating mechanism


3 3 6 .5
Z

2 3 6 2 2 0

3 1 0 (1 ) 1 5 2 .5
Y

1 6 1 (1 )

(3 )

(1 )
2 8 9 .5 (1 ) 1 6 9 .5 (1 )

16

(3 )

(1 ) (4 ) 1 -3 (5 )
N S E 0 _ 0 0 8 3 0 a

(6 ) 1 1 3 .5

2 2 7 (3 )

(1) Masking frame for door cut-out (for circuit-breaker with toggle lever) (2) Motorized operating mechanism (3) Front-operated rotary operating mechanism (4) Outside surface of cabinet door (5) Installation level (6) Safety lock

16/80

Siemens LV 1 Add-On 10/2006

1 3 4 (3 ) 2 1 2 (3 )

2 8 9 .5

2 1 2

1 6 9 .5

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Project planning aids
VL1200 UL (NG frame) and VL1600 UL (PG frame), 3- and 4-pole, up to 1600 A Withdrawable versions
Withdrawable version with front-operated rotary operating mechanism Insert position
4 7 4 .5 (1 ) 3 8 1 .5 (1 ) 3 6 5 .5 2 9 8 (1 ) 1 6 3 3 Z

Withdrawable version with front-operated rotary operating mechanism Withdraw position


3 6 5 .5 1 6 3 3 Z

2 4 9 .5

7 .5

(2 ) (3 ) (2 ) (3 )

2 6 4 .5

1 -3

> 3

N S E 0 _ 0 1 0 5 4

> 3

> 3

1 -3

(4 )
N S E 0 _ 0 1 0 5 3

3 2 9 .5 (5 ) (4 ) > 3 4 1 3 (5 ) 5 1 3 .5 (5 )

Insert position
4 8 6 .5 (1 ) 4 7 6 .5 (1 ) 4 4 0 .5 Z 2 9 8 (1 ) 6 2 1 3 .5

Withdraw position
4 4 0 .5 6 2 1 3 .5

6 3 .5

1 6 8 .5

3 0 2

1 6 8 .5

(2 ) 6 3 .5 2 6 4 .5

3 0 2

6 3 .5 2 6 4 .5

(2 )

(3 )
N S E 0 _ 0 1 0 5 6 a

1 0 0

1 -3

> 3

(4 ) 3 2 9 .5 (5 ) Z

> 3

(3 )

1 -3

> 3

N S E 0 _ 0 1 0 5 5

(4 )

> 3

(1) Connected position (2) Masking frame for door cut-out (3) Outside surface of cabinet door (4) Installation level (5) Disconnected position

1 0 0

6 3 .5

Siemens LV 1 Add-On 10/2006

16/81

16

Withdrawable version with motorized operating mechanism with spring energy store

Withdrawable version with motorized operating mechanism with spring energy store

2 6 4 .5

2 4 9 .5

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Project planning aids
VL1200 UL (NG frame) and VL1600 UL (PG frame), 3- and 4-pole, up to 1600 A Withdrawable versions
Withdrawable version with extended escutcheon (without masking frame) Insert position
3 7 8 .5 (1 ) 3 6 5 .5 2 9 8 (1 ) Z

Withdrawable version with extended escutcheon (without masking frame) Withdraw position
3 6 5 .5 Z

X X

(2 )

N S E 0 _ 0 1 0 5 7

(3 )

1 -3

(4 )

(1) Connected position (2) Masking frame for door cut-out (3) Outside surface of the cabinet door (4) Installation level (5) Disconnected position

(2 )

N S E 0 _ 0 1 0 5 8

(3 )

1 -3 (4 ) 3 2 9 .5 (5 ) 4 1 0 (5 )

Withdrawable versions
373 (4P) 297 (3P) 19,5 148,5

16

119,5

Y 249,5 X 44,5
NSE0_01059

514 424

304,5

230

12,5 395,5 (4P) 319,5 (3P) 159,5 Z 36 87 174 (6 x 8) Y

16/82

Siemens LV 1 Add-On 10/2006

264,5

152,5

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Project planning aids
VL1200 UL (NG frame) and VL1600 UL (PG frame), 3- and 4-pole, up to 1600 A Terminals
Z

143 16

36.5

76 (4P)

76

76

13

314.5

247

ON

591.5

I
X

537

OFF

(2) 40

NSE0_01859

(2) (3)

60 76

76

(2) Front connecting bars (only for VL1600 UL) (3) Installation level

577

307

Siemens LV 1 Add-On 10/2006

16/83

16

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Project planning aids
VL1200 UL (NG frame) and VL1600 UL (PG frame), 3- and 4-pole, up to 1600 A Rear interlocking module
Rear interlocking module For more detailed dimensional drawings, see installation instructions for rear interlocking module.
571,5 203,2 120,3 69,5 30 89,4 63,5

30

NSE0_01572

31,75 88,9

88,9

45,5

3-pole version
305 123

NSE0_01573

305

16

4-pole version
508 225

18,2
NSE0_01574

508

16/84

Siemens LV 1 Add-On 10/2006

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Project planning aids
VL1200 UL (NG frame) and VL1600 UL (PG frame), 3- and 4-pole, up to 1600 A Interlocks Locking device for toggle lever
J E F G
A G D B H C K

Type 3VL9 4 3VL9 6 3VL9 8

a 20.3 21.6 21.6

d 52.8 62.0 96.5

e 49.3 50.4 77.2

f 49.8 46.5 69.1

g 6.35 12.9 11.7

NSE0_01556

h 6.3 8.9 5.1

I 11.2 8.6 24.8

k 58.5 72.2 90.0

80.3 57.4 79.8 71.1 110.5 88.9

Accessories
Door-coupling rotary operating mechanism
5 2 9 M A X - 2 8 9 M IN (3 8 0 M IN W IT H (4 )) 2 3 6 2 3 1

1 5 2 .5 Z

1 -3

1 0 1 2 2

(4 )

4 0 .5

C L(2 )

1 3 9 .5 7 7 .5

1 2 x 1 2

1 7 X

(2 )

(3 )

2 2 .5 (2 )

N S E 0 _ 0 0 8 3 1 c

(5 )

Masking frame for door cut-out for circuit-breaker with toggle lever
Z

169 152.5

(1)

I
X

80

ON

(1)

OFF

175.5

(1) Masking frame for door cut-out (for circuit-breaker with toggle lever) (2) Door-coupling rotary operating mechanism (3) Outside surface of cabinet door

(3)

1-3 (5)

NSE0_00832b

70.5 140.5

(4) Support bracket (5) Installation level

Siemens LV 1 Add-On 10/2006

16/85

16

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Project planning aids
VL1200 UL (NG frame) and VL1600 UL (PG frame), 3- and 4-pole, up to 1600 A Door cut-outs
Door cut-out for toggle lever (without masking frame)
Y X
N S E 0 _ 0 0 8 3 3 a

Door cut-out for front-operated rotary operating mechanism and motorized operating mechanism (without masking frame)
Y

Door cut-out for door-coupling rotary operating mechanism


Y

4 x 6 2 1 2 4 1 3 3

5 .5

5 7 6 4

2 1 1

4 4

8 8

N S E 0 _ 0 0 8 3 4 a

1 0 2

5 1

X
N S E 0 _ 0 0 8 3 5 a

4 4 8 8

2 2 3

1 1 1 .5

Door cut-out for toggle lever (with masking frame)


1 2 9 .5
N S E 0 _ 0 0 8 3 6 a

Door cut-out for front-operated rotary operating mechanism, motorized operating mechanism and extended escutcheon (with masking frame)
2 9 7 1 4 2 .5
Y

6 5
Y

6 X

5 .5

7 3 .5

1 4 2

7 1

1 6 4

1 6 3

4 4 .5

4 X

5 .5

6 1
2 4 .5

1 2 2

2 7 6 .5

N S E 0 _ 0 0 8 3 7 a

16

2 6 0

1 3 0 1 5 2 .5

16/86

Siemens LV 1 Add-On 10/2006

9 5

1 4

2 4 5 .5

7 7 .5

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Project planning aids
VL150 UL (DG frame) to VL1600 UL (PG frame), 3- and 4-pole, up to 1600 A Interlock with Bowden wire
VL150 UL (DG frame), VL250 (FG frame)
R>60 mm

VL400 UL (JG frame), VL400X UL (LG frame)

VL800 UL (MG frame)


127 112 R>60 mm Y

VL400 UL (JG frame), VL400X UL (LG frame)


Y

127 112

216

96

69 150.5 66
X X

78 89

76

NSE00896

NSE00897

52.5 85

94 94

68.5 112

Combination options

66

151

N S E 0 _ 0 1 2 3 9

NSE00898

3VL9 300-8LA01 for VL150 UL (DG frame) and VL250 UL (FG frame)

3VL9 400-8LA01 for VL400 UL (JG frame) and VL400X UL (LG frame)

3VL9 600-8LA01 for VL800 UL (MG frame)

3VL9 800-8LA01 for VL1200 UL (NG frame) and VL1600 UL (PG frame) --

Interlock with Bowden wire


3VL9 300-8LA01 for VL150 UL (DG frame) and VL250 UL (FG frame) 3VL9 400-8LA01 for VL400 UL (JG frame) and VL400X UL (LG frame) 3VL9 600-8LA01 for VL800 UL (MG frame) 3VL9 800-8LA01 for VL1200 UL (NG frame) and VL1600 UL (PG frame) Combination possible

--

--

--

NSE00900

Siemens LV 1 Add-On 10/2006

16/87

16

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Project planning aids

Schematics
The graphical symbols used in the circuit diagrams provide information about the type, circuit and mode of operation of the devices, but contain no information about the design. As it is not possible to show all of the potential combinations here, it may be necessary to alter the schematics accordingly for different versions. The purpose of these circuit diagrams is merely to help improve the understanding of way in which the devices function.
Rotary operating mechanism Leading auxiliary switch
3 2 EMS 1 8 9 EBS 7
NSE 00758a

N 1 3 5

F3 F2
C1 C2 D1 D2

14 A1

K1HS
1 3

F1 + 15

Auxiliary switch Rotary operating mechanism Leading auxiliary switch


3 2 6 5

2 4

Q1

AS
5 7 6 8 K

Alarm switch

T1
L K

6 5 N 1 4 11 12 10 1 1 N C1 C2 D1 U< D2 2 1 4 1 6 3 5

HS 1 3 2 4 Auxiliary switch AS 5 7

EMS 1 EBS 7
NSE0_00759c

T2
L K L

8 9 11 12 10

T3
K

T4
L N 2 4 6

T5 T6

6 8 Alarm switch

Connection diagram for SENTRON VL150 UL (DG frame) to VL1600 UL (PG frame) circuit-breakers for system protection with thermal-magnetic overcurrent trip units

Internal circuit diagram for SENTRON VL150 UL (DG frame) and VL250 UL (FG frame) circuit-breakers for system protection with solidstate overcurrent trip units

N 1 3 5

F3 F2
C1 C2

D1

A1 F1 + _ > >

D2

HS
1 3

16

Auxiliary switch Rotary operating mechanism Leading auxiliary switch


3 2 6 5

2 4

Q1

AS
5 7 6 8 K

Q1 A1 F1 F2 F3 HS AS EBS EMS T1 ... T6

Main contacts Solid-state overcurrent trip unit Tripping solenoid for A1 Undervoltage trip unit Shunt trip unit Auxiliary switches Alarm switches Leading auxiliary switch from ON to OFF (installed in rotary operating mechanism) Leading auxiliary switch from OFF to ON (installed in rotary operating mechanism) Current transformers

Alarm switch

T1
L K

EMS EBS

4 8 9 11 12 1 7 10

T2
L K

T3
K L

NSE0_00760d

T4
L N 2 4 6

T5

T6

Internal circuit diagram for SENTRON VL400 UL (JG frame) to VL1600 UL (PG frame) circuit-breakers for system protection with solid-state overcurrent trip units

16/88

Siemens LV 1 Add-On 10/2006

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Project planning aids
L1 (L+) F S1 ON S0 OFF -X20 2 S2A 3 S2B
LOCAL OFF

L1 (L+) F S1 ON S0 OFF

4
Motorized operating mechanism with spring energy store MANUAL
OFF/0 ON/1 AUTO/ MANUAL OFF/ CHARGE HANDLE

-X20
S2A

3
S2B

4
Motorized operating mechanism with spring energy store MANUAL
OFF/0 ON/1 AUTO/ MANUAL OFF/ CHARGE HANDLE

Y1

LOCK OUT

Y1

LOCAL OFF

LOCK OUT

CB OPEN

CB CLOSED

PE
N (L2,L-) F

CB OPEN

CB CLOSED

M 5 PE

S4

N (L2,L-)

-X20

1
NSE0_00761d

-X20 1
NSE0_00762c

S0 S1 S2 S4 Y1 F S01 K1

OFF (to be provided by customer) ON (to be provided by customer) Selector switch auto/manual Interlocking switch Closing solenoid Fuse in control circuit Remote control (to be provided by customer) Contactor relay (to be provided by customer)

S0 S1 S2 S4 Y1 F S01 K1

OFF (to be provided by customer) ON (to be provided by customer) Selector switch auto/manual Interlocking switch Closing solenoid Fuse in control circuit Remote control (to be provided by customer) Contactor relay (to be provided by customer)

Motorized operating mechanism with spring energy store for SENTRON VL150 UL (DG frame) and VL250 UL (FG frame) circuit-breakers without undervoltage trip units

Motorized operating mechanism with spring energy store for SENTRON VL400 UL (JG frame) to VL800 UL (MG frame) circuit-breakers without undervoltage trip units

L1 (L+) F S1 ON S01 S0 OFF K1 7 8


Alarm switch

L1 (L+) F S1 ON S01 K1
Motorized operating mechanism with spring energy store MANUAL
OFF/0 ON/1 AUTO/ MANUAL OFF/ CHARGE HANDLE

7 S0 OFF
Alarm switch

-X20 2 3
S2A S2B
LOCAL OFF

-X20 2 3
S2A S2B

4
OFF/ CHARGE HANDLE

OFF/0

ON/1

AUTO/ MANUAL

Y1

LOCK OUT

Y1

LOCAL OFF

LOCK OUT

K1
CB OPEN CB CLOSED

K1
M

PE N (L2,L-)

CB OPEN

CB CLOSED

5 PE

S4

N (L2,L-) F

-X20

1
NSE0_00591d

-X20 1
F
NSE0_00763d

S0 S1 S2 Y1 F S01 K1

OFF (to be provided by customer) ON (to be provided by customer) Selector switch auto/manual Closing solenoid Fuse in control circuit Remote control (to be provided by customer) Contactor relay (to be provided by customer)

S0 S1 S2 S4 Y1 F S01 K1

OFF (to be provided by customer) ON (to be provided by customer) Selector switch auto/manual Interlocking switch Closing solenoid Fuse in control circuit Remote control (to be provided by customer) Contactor relay (to be provided by customer)

Note: a separate alarm switch (7-8) can be incorporated for automatic charging after a release. Automatic closing of a tripped circuit-breaker is not recommended, in order to prevent a switch of the circuit-breaker to a fault in the protected circuit. Motorized operating mechanism with spring energy store for SENTRON VL150 UL (DG frame) and VL250 UL (FG frame) circuit-breakers with undervoltage trip units

Note: a separate alarm switch (7-8) can be incorporated for automatic charging after a release. Automatic closing of a tripped circuit-breaker is not recommended, in order to prevent a switch of the circuit-breaker to a fault in the protected circuit. Motorized operating mechanism with spring energy store for SENTRON VL400 UL (JG frame) to VL800 UL (MG frame) circuit-breakers with undervoltage trip units

Siemens LV 1 Add-On 10/2006

16/89

16

Motorized operating mechanism with spring energy store MANUAL

3VL Molded Case Circuit-Breakers


approved according to UL 489 up to 1600 A
Project planning aids
L1 (L+) F S1 S0 Motorized operating mechanism
LOCAL ON LOCAL OFF ON OFF

L 1 (L + ) F 4
3 4

L 1 (L + ) F 4 S 0 S 0

-X20 2

X 1 .1 D 1 F 2 D 2
LOCK OUT CB OPEN CB CLOSED

"S contact" is integrated into shunt trip unit


S

X 1 .1

F 3

C 1 C 2 X 1 .2

S4
INTERLOCK OPEN

S2
LOCK OUT

X 1 .2
PE

N (L2,L-)

-X20 1
F
NSE0_00764b

N (L 2 ,L -) F 5
N S E 0 _ 0 0 7 6 6 a

N (L 2 ,L -) F 5
N S E 0 _ 0 0 7 6 7 a

UNDERVOLTAGE TRIP UNIT

SHUNT TRIP UNIT

S0 S1 S2 S4 F S01 K1

OFF (to be provided by customer)) ON (to be provided by customer) Lock out Interlock open Fuse in control circuit Remote control Contactor relay

Undervoltage and shunt trip unit for SENTRON VL150 UL (DG frame) to VL1600 UL (PG frame) circuit-breakers

Motorized operating mechanism for SENTRON VL1200 UL (NG frame) and VL1600 UL (PG frame) circuit-breakers without undervoltage trip units

L1 (L+) F S1 K1 S0 -X20 2
Motorized operating mechanism
LOCAL ON LOCAL OFF ON OFF

7 8 3 4
Alarm switch

S01

16

K1

LOCK OUT

M S4
INTERLOCK OPEN

S2
LOCK OUT

CB OPEN

CB CLOSED

5 PE

N (L2,L-) F

-X20

1
NSE0_00592c

S0 S1 S2 S4 F S01 K1

OFF (to be provided by customer) ON (to be provided by customer) Lock out Interlock open Fuse in control circuit Remote control Contactor relay

Note: a separate alarm switch (7-8) can be incorporated for automatic charging after a release. Automatic closing of a tripped circuit-breaker is not recommended, in order to prevent a switch of the circuit-breaker to a fault in the protected circuit. Motorized operating mechanism for SENTRON VL1200 UL (NG frame) and VL1600 UL (PG frame) circuit-breakers with undervoltage trip units

16/90

Siemens LV 1 Add-On 10/2006

Appendix
Siemens Contacts Worldwide
At http://www.siemens.com/automation/partner you can find details of Siemens contact partners worldwide responsible for particular technologies. You can obtain in most cases a contact partner for Technical support, Spare parts/repairs, Service, Training, Sales or Consultation/engineering. You start by selecting a Country, Product or Sector. By further specifying the remaining criteria you will find exactly the right contact partner with his/her respective expertise.

Siemens LV 1 Add-On 10/2006

16/91

16

Appendix
Customer Support

Configuration and software engineering

Support in configuring and developing with customeroriented services from actual configuration to implementation of the automation project2)

.I

Technical support

In the face of harsh competition you need optimum conditions to keep ahead all the time: A strong starting position. A sophisticated strategy and team for the necessary support - in every phase. Service & Support from Siemens provides this support with a complete range of different services for automation and drives. In every phase: from planning and startup to maintenance and upgrading. Our specialists know when and where to act to keep the productivity and cost-effectiveness of your system running in top form.

Competent consulting in technical questions covering a wide range of customeroriented services for all our products and systems. Tel.: +49 (180) 50 50 222 Fax: +49 (180) 50 50 223 http://www.siemens.com/ automation/support-request

Online support

The comprehensive information system available round the clock via Internet ranging from Product Support and Service & Support services to Support Tools in the Shop. http://www.siemens.com/ automation/service&support

Service on site

With Service On Site we offer services for startup and maintenance, essential for ensuring system availability. Tel.: +49 (180) 50 50 4442)

16

Technical consulting

Repairs and Spare Parts


Support in the planning and designing of your project from detailedactual-state analysis, target definition and consulting on product and system questions right to the creation of the automation solution2).

In the operating phase of a machine or automation system we provide a comprehensive repair and spare parts service ensuring the highest degree of operating safety and reliability. In Germany Tel.: +49 (180) 50 50 4462)

Technical assistance Expert technical assistance1) for Low-voltage controls and electrical installation. Tel.: +49 (9 11) 8 95-59 00 Fax: +49 (9 11) 8 95-59 07 E-mail: technical-assistance @siemens.com

Optimization and upgrading

To enhance productivity and save costs in your project we offer high-quality services in optimization and upgrading2)

1)

Contact: Technical assistance for product selection Old/new coding Competitor coding Special versions Special requirements Sales promotion (Infoline). Your regional contacts for sales support (prices, discounts, delivery times). Technical Support for commissioning support and after-sales services.

2)

For country-specific telephone numbers go to our Internet site at: http://www.siemens.com/automation/service&support

16/92

Siemens LV 1 Add-On 10/2006

Appendix
Metal Surcharges

Explanation of the metal factor


Surcharges will be added to the prices of products that contain silver, copper, aluminum, lead and/or gold if the respective basic official prices for these metals are exceeded. The surcharges will be determined based on the following criteria: Official price of the metal Official price on the day prior to receipt of the order or prior to the release order (=daily price) for - silver (verarbeitet), - gold (verarbeitet) Source: Umicore, Hanau (http://www.metalsmanagement.umicore.com) and for - copper (niedrige DEL-Notiz + 1%), - aluminum (ALU in Kabeln) and - lead (Blei in Kabeln) Source: German Trade Association for Cables and Conductors (http://www.kabelverband.de) Metal factor of the products Certain products are assigned a metal factor. The metal factor determines the official price as of which the metal surcharges are charged and the calculation method used (weight or percentage method). An exact explanation is given below. Structure of the metal factor The metal factor consists of several digits; the first digit indicates whether the method of calculation refers to the list price or a discounted price (customer net price) (L = list price / N = customer net price). The remaining digits indicate the method of calculation used for the respective metal. If no surcharge is added, a "-" is used.
1st digit 2nd digit 3rd digit 4th digit 5th digit 6th digit List or customer net price using the percentage method for silver (AG) for copper (CU) for aluminum (AL) for lead (PB) for gold (AU) N A 6 Basis for % surcharge: Customer net price No surcharge for silver Copper: basis 150 , step range 50 , 0.1 % Aluminum acc. to weight, basic offic. price 225 No surcharge for lead No surcharge for gold 3 No basis necessary No surcharge for silver Copper acc. to weight, basic official price150 No surcharge for aluminum No surcharge for lead No surcharge for gold
A&D/MZ_1/En 05.09.06

Weight method The weight method uses the basic official price, the daily price and the raw material weight. In order to calculate the surcharge, the basic official price must be subtracted from the daily price. The result is then multiplied by the raw material weight. The basic official price can be found in the table below using the number (2 to 9) of the respective digit of the metal factor. The raw material weight can be found in the respective product descriptions. Percentage method Use of the percentage method is indicated by the letters A-Z at the respective digit of the metal factor. The surcharge is increased - dependent on the deviation of the daily price compared with the basic official price - using the percentage method in "steps" and consequently offers surcharges that remain constant within the framework of this "step range". A higher percentage rate is charged for each new step. The respective percentage level can be found in the table below. Metal factor examples
LEA Basis for % surcharge: List price Silver: basis 150 , step range 50 , 0.5% Copper: basis 150 , step range 50 , 0.1 % No surcharge for aluminum No surcharge for lead No surcharge for gold

Siemens LV 1 Add-On 10/2006

16/93

16

Appendix
Metal Surcharges

Values of the metal factor


Percentage method Basic official price Step range % surcharge 1st step Official price A B C D E F G H I J K L M O P Q R S 150 150 150 150 150 150 150 150 150 150 150 150 150 175 175 175 175 225 225 225 225 225 125 150 400 Price basis (1st digit) L N Weight method 2 3 4 5 6 7 8 9 Misc. No metal surcharge
A&D/MZ_2/En 05.09.06

% surcharge 2nd step Official price 0.2 0.4 0.6 0.8 1.0 1.2 1.4 2.4 3.2 3.6 3.5 4.4 5.0 0.2 0.4 0.6 1.0 0.4 1.0 2.0 1.5 2.5 3.8 0.6 0.2

% surcharge 3rd step Official price 0.3 0.6 0.9 1.2 1.5 1.8 2.1 3.6 4.8 5.4 5.0 6.6 7.5 0.3 0.6 0.9 1.5 0.6 1.5 3.0 2.0 3.5 5.7 0.9 0.3

% surcharge 4th step Official price 0.4 0.8 1.2 1.6 2.0 2.4 2.8 4.8 6.4 7.2 6.5 8.8 10.0

% surcharge per additional step

151 - 200 201 - 250 251 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 25 25 25 0.1 0.2 0.3 0.4 0.5 0.6 0.7 1.2 1.6 1.8 2.0 2.2 2.5 0.1 0.2 0.3 0.5 0.2 0.5 1.0 1.0 1.2 1.9 0.3 0.1

300 301 - 350 0.1 0.2 0.3 0.4 0.5 0.6 0.7 1.2 1.6 1.8 1.5 2.2 2.5 0.1 0.2 0.3 0.5 0.2 0.5 1.0 1.0 1.0 1.9 0.3 0.1

176 - 225 226 - 275 276

325 326 - 375 0.4 0.8 1.2 2.0 375 376 - 425 0.8 2.0 4.0 3.0 4.5 200 201 - 225 7.6 225 226 - 250 1.2 475 476 - 500 0.4

226 - 275 276 - 325 326 T U V W X Y Z

16

126 - 150 151 - 175 176 151 - 175 176 - 200 201 401 - 425 426 - 450 451

Charged on the list price Charged on the customer net price or discounted list price
Basic official price

100 150 175 200 225 300 400 555 Calculation based on raw material weight

16/94

Siemens LV 1 Add-On 10/2006

Appendix
Conditions of Sale and Delivery Export Regulations

Terms and Conditions of Sale and Delivery


By using this catalog you can acquire hardware and software products described therein from Siemens AG subject to the following terms. Please note! The scope, the quality and the conditions for supplies and services, including software products, by any Siemens entity having a registered office outside of Germany, shall be subject exclusively to the General Terms and Conditions of the respective Siemens entity. The following terms apply exclusivelyfor orders placed with Siemens AG. For customers with a seat or registered office in Germany The General Terms of Payment as well as the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry shall apply. For software products, the General License Conditions for Software Products for Automation and Drives for Customers with a Seat or registered Office in Germany shall apply. For customers with a seat or registered office outside of Germany The General Terms of Payment as well as the General Conditions for Supplies of Siemens, Automation and Drives for Customers with a Seat or registered Office outside of Germany shall apply. For software products, the General License Conditions for Software Products for Automation and Drives for Customers with a Seat or registered Office outside of Germany shall apply. General The dimensions are in mm. In Germany, according to the German law on units in measuring technology, data in inches only apply to devices for export. Illustrations are not binding. Insofar as there are no remarks on the corresponding pages, - especially with regard to data, dimensions and weights given these are subject to change without prior notice. The prices are in (Euro) ex works, exclusive packaging. The sales tax (value added tax) is not included in the prices. It shall be debited separately at the respective rate according to the applicable legal regulations. Prices are subject to change without prior notice. We will debit the prices valid at the time of delivery. Surcharges will be added to the prices of products that contain silver, copper, aluminum, lead and/or gold, if the respective basic official prices for these metals are exceeded. These surcharges will be determined based on the official price and the metal factor of the respective product. The surcharge will be calculated on the basis of the official price on the day prior to receipt of the order or prior to the release order. The metal factor determines the official price as of which the metal surcharges are charged and the calculation method used. The metal factor, provided it is relevant, is included with the price information of the respective products. An exact explanation of the metal factor can be found on the page entitled Metal surcharges.

The texts of the Comprehensive Terms and Conditions of Sale and Delivery are available free of charge from your local Siemens business office under the following Order Nos.: 6ZB5310-0KR30-0BA1 (for customers based in Germany) 6ZB5310-0KS53-0BA1 (for customers based outside of Germany) or download them from the Internet http://www.siemens.com/automation/mall (Germany: A&D Mall Online-Help System)

Export regulations
The products listed in this catalog / price list may be subject to European / German and/or US export regulations. Therefore, any export requiring a license is subject to approval by the competent authorities. According to current provisions, the following export regulations must be observed with respect to the products featured in this catalog / price list: AL Number of the German Export List Products marked other than N require an export license. In the case of software products, the export designations of the relevant data medium must also be generally adhered to. Goods labeled with an AL not equal to N are subject to a European or German export authorization when being exported out of the EU. Export Control Classification Number. Products marked other than N are subject to a reexport license to specific countries. In the case of software products, the export designations of the relevant data medium must also be generally adhered to. Goods labeled with an ECCN not equal to N are subject to a US re-export authorization.

ECCN

Even without a label or with an AL: N or ECCN: N, authorization may be required due to the final destination and purpose for which the goods are to be used. The deciding factors are the AL or ECCN export authorization indicated on order confirmations, delivery notes and invoices. Errors excepted and subject to change without prior notice.
A&D/VuL_mit MZ/En 05.09.06

16/16

www.siemens.com/lowvoltage
Siemens AG Automation and Drives Low-Voltage Controls and Distribution Postfach 48 48 90327 NRNBERG GERMANY w w w. s i e m e n s . c o m / a u to m a t i o n
The information provided in this catalog contains descriptions or characteristics of performance which in case of actual use do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressly agreed in the terms of contract. Availability and technical specifications are subject to change without notice. All product designations may be trademarks or product names of Siemens AG or supplier companies whose use by third parties for their own purposes could violate the rights of the owners.

Order No. E86060-K1002-A151-A2-7600

Token fee: 2,00

Subject to change without prior notice | Dispo 68201 | KG 1006 3. E 96 En / 603021 | Printed in Germany | Siemens AG 2006

3VL Molded Case Circuit-Breakers approved according to UL 489 up to 1600 A

Catalog LV 1 Add-On October 2006

Anda mungkin juga menyukai