Odour Management
Anotec® 0307
Odour Control – Vapour Phase
Features
• Removal Efficiency for Odour mitigation chemical for industrial, fugitive and related
Odour >90% odorous emissions.
• Safe Non-toxic and
immediate reduction
Applications:
• To significantly reduce and / or eliminate malodours associated with
landfill, site remediation and waste management facilities using
engineered atomising devices.
Typical Properties:
*Specification Writers: Please contact your local Anotec sales office before
writing specifications for this product
DESCRIPTION
The chemical constituents of Anotec® 0307 are to exert a significant effect on the rate of
highly active organic compounds that include but degradation. Run-off can be disposed of via normal
are not limited to sugar derivatives and peptides. wastewater channels.
Anotec’s unique blend of compounds forms
complexes that effectively absorb and treat The proprietary additives for binding, enhancing
offending odour molecules. Further, the Anotec® biodegradation and odour profiling – each of which
0307 blend, when applied, reduces the surface is >2% - are all food grade quality.
tension in the liquid phase and assists in the The active ingredients in this product have boiling
blocking or inhibition of volatisation of malodours. points in >1500C. Anotec® 0307 is fully miscible in
water and the product does not have a measurable
The effectiveness of Anotec® 0307 Odour Control flash point.
formulations stems from the unique chemistry of Application via a misting or fogging system ensures
synergised surfactants ad odour profiling direct contact between the Anotec odour control
technology, enabling efficient and immediate formulation and the malodorous emission. Upon
reduction in chemical odour concentrations when direct contact, odour analysis shows a significant
compared to conventional odour abatement reduction in chemical odour concentrations for each
technologies. component identified in any malodorous mix. 1
PERFORMANCE CHARACTERISTICS
Performance Characteristics of Anotec® 0307 odour control formula compared with Conventional Odour
Abatement Methods (Masking Agent)
HOW TO USE
LIMITATIONS
Industrial & Waste Management
(Vapour Phase) Formulations Anotec products are neither tested nor represented
as suitable for medical or pharmacological use.
Anotec® 0307 odour control formulations are
diluted with clean water prior to use. Once the PRODUCT EVALUATION & ASSESSMENT
chemistry of the emission has been determined, the INFORMATION
appropriate Anotec® 0307 formulation will be
supplied. As a guideline, Dilution rates vary Evaluation of Anotec odour control formulations
between 1:40 – 1:1000. Example, small sewage have been carried out by numerous government
installations with low-medium odour levels will dilute and private laboratories and organisations. These
Anotec® 0307 1:40 prior to use. include but are not limited to ANSTO,
Environmental Science Program (AUS), Odor
Anotec® 0307 products can be applied via high Science Engineering (USA), Korea Heavy Industry
pressure or air atomisation devices, via portable Group (ROK), Stephenson & Associates (AUS),
(hand-held and larger) misting systems or custom CH2MHill (AUS), Dow Corning (NZ for PRO5L),
built application equipment depending on the University of New South Wales (AUS).
industry type and area to be treated. Removal Efficiency (RE%) using Anotec
formulations to challenge malodours have
APPLICATION consistently been reported to be >80%.
Achieving the correct droplet size is fundamental in LIMITED WARRANTY INFORMATION – PLEASE
ensuring the efficacy of Anotec odour control READ CAREFULLY
formulations. Anotec product consumption rates
heavily depend on application device and duration The information contained herein is offered in good
of atomisation. faith and is believed to be accurate. However, due
to varying conditions and methodologies engaged
USABLE LIFE & STORAGE by clients when using our products that are beyond
our control, we strongly advise against using this
When stored between 200C ad 400C Anotec® 0307 information in conjunction with any other product
odour control products have a shelf life of two years and forbid the use of any analytical or sensory
from the date of manufacture. Once opened, the assessments to be used as support for
product will need to be consumed within 6 months implementation at any given site unless a
to retain efficacy. comparative study is conducted onsite.
Photograph – Anotec Pty Ltd 2006 Photograph – Anotec Pty Ltd 2006
Cluster nozzles (high pressure system) Anotec® 0307 product onsite storage
2
Calculation for area approximating 300m (there
may be a need to simply apply product to pre-
Photograph – Kaplan Ticaret 2006 determined areas hence the omission to calculate
Truck mounted system front view encompassing the nominated and specified
measurement of 900 x 70 x 35