Zero-Smog® System 3
Filter Technology 5
Filter Process 5
Volume Extraction 6 – 17
WFE 8S ........................................................................................... 8
WFE 4S ........................................................................................... 9
WFE 2X ......................................................................................... 10
WFE 2S ......................................................................................... 11
WFE 2ES / WFE 2CS .................................................................... 12
Installation Options .................................................................... 13
Accessories ......................................................................... 14 – 17
Spare Part Filter ........................................................................... 17
Tip Extraction 18 – 26
WFE .............................................................................................. 20
WFE P ........................................................................................... 20
WFE 20D ...................................................................................... 21
FE (Fume Extraction) Soldering Irons ............................. 22 – 23
Safety Rests ........................................................................ 23 – 24
Accessories .................................................................................. 25
Spare Part Filter .......................................................................... 25
Installation Options ................................................................... 26
Why Fume Extraction?
Many work environments today, including It is important to use the correct safety equip-
soldering, adhesives, welding and laser appli- ment to remove these hazardous substances.
cations, create particles and gases that can be Fine particles are more dangerous to inhale
harmful to the work place and the environment. than big particles as they get caught more
Most people thought that the move to lead- easily and block the alveoli in the lungs.
free soldering would be more nature friendly.
In reality lead-free soldering smoke emissions To protect the operator it is important to
contain more breathable fine dust particles. use an extraction system that is able to se-
More and smaller particles are produced due parate these particles and gases and then
to the higher working temperatures required re-circulates the cleaned air back into the
and because more flux is used in the soldering work place. This saves energy and reduces
process. energy costs.
Zero-Smog® System
The Zero-Smog® Systems from Weller® pro- The Zero-Smog® Systems help to create a good
tect operator and the environment. Their work environment. They are small and easy
filter systems catch the polluted air right to place and have low noise level emissions.
at the source, and prevent the diffusion of Extraction arms and nozzles are adjustable so
particles and gases. they can get close to the source and guarantee
optimum fume capture.
The Zero-Smog® Systems have a broad range
of filters that can be combined to provide the To increase filter lifetime and save energy,
best solution to the problem. The standard most Zero-Smog® Systems are fitted with an
filters are designed for the needs of lead-free automatic speed control (dependent on the
soldering, adhesives and laser applications number of workplaces connected). Effective
but Weller® has filters suitable for all the most pre-filters, integrated into the units, save the
common applications found in industry and main filter and can be exchanged very simply.
laboratories.
Zero-Smog® System
Tip Extraction
Tip Extraction
Volume Extraction
Volume Extraction
Filter Technology
Weller® Zero-Smog® Systems are specifically 1. The hazardous substances are efficiently Filter Class Recommended Application
designed for continuous operation in industrial captured by the nozzle and are absorbed F5 for standard applications
environments. Care and attention at the design into the filter.
stage plus careful component choice and a 2. Bigger particles get caught in the pre- F7 for applications with high
high quality manufacturing process have given filter and smaller particles get caught in flux content
Weller® extraction systems a world wide the HEPA (High Efficiency Particulate Air)
reputation for reliability and longevity. filter.
H12 / H13 filter for clean rooms
3. The Wide Band Gas Filter removes
1000 – 100
Weller® Zero-Smog® Systems have a three fumes and adhesives.
stage filter system for removing small
particles, fumes and gases that are produced End product – clean air – is re-circulated into
in different working processes: the workplace.
Volume Extraction
Volume extraction is the best choice where Weller® has a broad range of filter units for
extraction over a wide area is required. It is an volume extraction applications. Speed control
economical way to eliminate polluted process allows optimal air flow regulation for each
air as there is no need for fixed installations working place independent of the connected
and maintenance requirements are minimal. workplaces. Units can be remotely controlled
Arms and nozzles do not require daily cleaning. via a remote control system (available as acces-
Energy costs are saved because the cleaned sory) or by a PC (RS232) connection.
air is re-circulated back into the work area
and does not need to be heated or cooled like
external air.
Volume Extraction Units
Characteristics
Areas of application
up to 2 workplaces
Volume Extraction
WFE 8S
Powerful fume extraction unit
with large integrated pre-filter Attributes
The fume extraction unit WFE 8S can be con- Its high quality components keep service
nected to up to 8 extraction arms. This makes needs to a minimum. The combination of low
the unit suitable to use as a small central running costs and a flexible system indepen-
system in applications such as soldering, ad- dent of fixed installations produces a unit with
hesives, clean-room work and laser work. It is a very low cost of ownership. WFE 8S can be
also capable for connection to small, selective connected so that it exhausts air. This is an
reflow and soldering ovens. The large integra- advantage in applications where re-circulation
ted pre-filter makes the WFE 8S very suitable is not allowed. To further increase the filter
for lead-free soldering as it is able to catch lifetime and save energy, the WFE 8S has an
a large quantity of particles. The WFE 8S is a automatic airflow control - depending on the
mobile system that is simple to install – it does number of connected workplaces.
not require any permanent installation.
Fine dust
pre-filter F7
WFE 4S Pre-filter to extend capacity of
Mobile fume extraction unit purifies WFE 2S, WFE 4S, WFE 2X
air up to 8 soldering workplaces Attributes
The fume extraction system WFE 4S is user- The powerful maintenance free variable speed
friendly with quick and simple installation and turbine is electronically controlled and has a
filter exchange. It has a low noise emission maximum capacity of 615 m3/h. It has 3 opera-
level and is small and convenient to locate ting modes: Fine dust pre-filter F7
within the work area. 1. Standard speed control – selected by the user
irrespective of the load on the system.
The high quality components used in the 2. Speed limiting control – the pump speed is
WFE 4S result in low servicing requirements automatically varied to match the load on
and long system life. To increase filter lifetime the system.
and save on energy, the WFE 4S is fitted with 3. Economy control – the rate of fume HEPA filter H13
an automatic airflow speed control - depending absorption is maintained at a constant value. and
on the number of connected workplaces. To The operating hours and the filter condition wide band gas filter
extend the capacity an external pre-filter can are recorded for maintenance purposes.
be fixed directly to the WFE 4S.
Volume Extraction
WFE 2X
Mobile fume extraction unit
purifies air up to two workplaces Attributes
10
WFE 2S WFE 2 Kit 1
Mobile fume extraction unit
available in two kits Attributes
Scope of supply
Scope of supply WFE 2S
005 36 266 99 WFE 2S Fume extraction
WFE 2S Fume extraction unit 120/230 V / 50/60 Hz unit 120/230 V / 50/60 Hz
Compact filter 2 x 005 36 572 99 KIT 1 WF Sloped 60 for
Technical Data Consists of: HEPA filter H13, wide band gas filter volume extraction
Maximum capacity 2 work places (50 % active carbon / 50 % Puratex) consists of:
Maximum extraction rate 230 m3/h Fine dust pre-filter F7 2 x 005 36 578 99 Extraction arm
Sound level 48 db (A) in 1 m distance 2 x 005 36 577 99 Slopped nozzle
Order No. 230V 005 36 266 99
2 x 005 36 574 99 Stop valve
Standard connection pipe system 50 Order No. 120V WFE2S 2 x 005 365 75 99 Bench mounting bracket
Operating voltage 120/230 V / 50/60 Hz 2 x 005 36 576 99 Extraction hose
Power input 275 VA Option: WFE 2S with gas filter
Compact filter for adhesive fumes. Consists of:
Maximum vacuum 2.700 Pa Order No. 230V 005 36 456 99
wide band gas filter (50 % active carbon / 50 % Puratex)
Dimensions (L x W x H) 320 x 320 x 395 mm Order No. 120V WFE2Kit2
12.6 x 12.6 x 15.5 in Order No. 230V 005 36 466 99
Weight 19 kg / 41.8 lb Order No. 120V WFE2SG
11
Volume Extraction
12
Installation Options
extraction hose 60
sold by meter
rubber hose
005 87 627 52 005 87 354 27
connecting piece
005 87 627 51 RS 232 cable (2 m)
O-ring 005 31 191 99
005 87 627 53
remote control
WSD 81 005 87 359 09
rubber hose
Installation option for a central and hose connection 50
005 87 358 47
005 87 627 52
connecting piece
Kit WF Funnel 60
005 36 571 99
005 87 627 51
stand alone system with WFE 4S hose connection 70 90
005 87 358 33
O-ring
005 87 627 53
WF extraction arm 60
damper WFV 60 005 36 578 99
005 36 574 99
extraction hose 60
sold by meter extraction hose 75 rubber hose
005 87 354 27 005 87 353 13 005 87 627 52 pipe clamps 75
connecting piece 005 87 358 64
005 87 627 51
O-ring
hose clamp 70-90 005 87 627 53 adapter 75/50
WFE 4S 005 87 358 31 005 87 358 56
T piece 75
extraction hose 60 005 87 358 71
3m
005 36 576 99 rubber hose
005 87 627 52
connecting piece
005 87 627 51
O-ring
005 87 627 53
RS 232 cable (2 m)
005 31 191 99
rubber hose remote control
005 87 627 52 005 87 359 09
connecting piece Kit WF Sloped 60
005 87 627 51 005 36 572 99
O-ring 160
005 87 627 53
extraction arm with stativ extraction arm 60
005 36 989 99 005 36 578 99
extraction hose 60
3m
005 36 57 699 WF nozzle sloped
005 36 577 99
end seal 75
WD 2000M 005 87 358 55
WFE 8S
RS 232 cable (2 m)
005 31 191 99
bench mounting bracket 60
005 36 574 99
damper WFV 60
005 36 574 99
remote control
005 87 359 09
13
Volume Extraction
Accessories When soldering, gluing or working with The Weller® 60 mm (2.36 in) flexible extraction
solvents it is important to place the nozzle arms allow the quiet and efficient capture of
as close to the source as possible to prevent polluted air. The arms and nozzles are simple
harmful particles and gases being spread into to install due to the click-on funnels and can
work area. easily be fixed into the required position.
005 87 358 32 Hose connection 75 for WFE 2S and WFE 4S, e.g. for connection to a stand alone
system by means 75 mm (2.95 in) pipe or 75 mm (2.95 in) extraction hose. Plastic, black.
005 87 358 48 Hose connection 50, 90° for WFE 2S and WFE 4S, e.g. for the direct connection of
accessories by means of 50 mm (1.96 in) extraction hose. Plastic, black.
005 87 358 33 Hose connection 75, 90° for WFE 2S and WFE 4S, e.g. for connection to a stand alone
system by means of 75 mm (2.95 in) pipe or 75 mm (2.95 in) extraction hose. Plastic, black.
005 87 353 13 Extraction hose 75, ø 75 mm (2.95 in), for connection to pipe system 75.
Sold by metre. Plastic, grey/black, flexible.
005 36 576 99 Extraction hose 60, ø 60 mm (2.36 in), for connection to pipe system 50.
3 m (118.11 in). Plastic, grey/black, flexible.
005 87 354 27 Extraction hose 60, ø 60 mm (2.36 in), for connection to pipe system 50.
Sold by metre. Plastic, grey/black, flexible.
005 87 358 79 Hose clamp 50 – 70 mm, (1.96 - 2.75 in), 2 units, for securing extraction hose 50.
005 87 358 31 Hose clamp 70 – 90 mm, (2.75 - 3.54 in), 2 units, for securing extraction hose 75.
14
Order No. Description
005 36 598 99 Stativ extraction arm, 60 mm diameter, flexible extraction arm
with articulated joint and airflow control valve and bench clamp. ESD safe.
005 36 578 99 Flexible extraction arm, 60 mm (2.36 in) diameter, for sloped and funnel nozzles.
Maximum length 1 m (39.37 in), ESD safe.
100 mm 100 mm
200 mm 200 mm
300 mm 300 mm
300 mm
200 mm
100 mm
100 mm
200 mm
300 mm
300 mm
200 mm
100 mm
100 mm
200 mm
300 mm
300 mm
200 mm
100 mm
100 mm
200 mm
300 mm
0 mm
0 mm
005 36 573 99 WF funnel nozzle 60, for flexible and stativ extraction arm, 100 mm (3.93 in) diameter. 0 mm
100 mm
200 mm
300 mm
300 mm
200 mm
100 mm
100 mm
200 mm
300 mm
005 87 358 45 Exhaust hood, 200 x 100 mm (7.87 x 3.93 in), recommended for use with hot air
soldering operations uses extraction hose 60.
005 36 380 99 WFDD 50 Extraction plate with 1 m (39.37 in) flexible hose, 300 x 210 mm
(11.81 x 8.26 in), for adhesive and solvent fume extraction. ESD safe.
15
Volume Extraction
Accessories
005 36 575 99 Bench mounting bracket. Maximum width of clamp 100 mm (3.93 in).
100 mm (3.93 in) diameter. Metal, black.
005 36 348 99 Extraction arm, can be mounted directly to work bench, ESD safe.
005 36 349 99 Extraction hood PE transparent, 296 x 248 mm (11.65 x 9.76 in).
005 87 627 50 60/50 Adapter for applications using the 60 mm (2.36 in) extraction system
connected to the former 50WFTB and WFFMP50.
16
Exhaust accessories to blow waste Order No. Description
air out of a building 005 87 359 20 Exhaust adapter of pipe 100 to fume extraction unit WFE 20D.
005 87 358 40 Exhaust adapter of pipe 100 to fume extraction unit WFE 4S.
005 87 359 15 Exhaust adapter of pipe 75 for fume extraction unit WFE 2S.
005 36 593 99 Remote control for fume extraction unit WFE 2X with 2 m (78.74 in) cable.
005 31 191 99 Interface cable RS 232, 2 m (78.74 in) for remote monitoring by PC (type 1:1).
Order No. Spare filter WFE 8S: Order No. Spare filter for WFE 2X: Order No. Spare filter for WFE 4S:
005 36 594 99 Replacement pre-filter 005 36 590 99 Replacement compact filter 005 87 358 37 Fine dust filter F5 (10 pieces)
005 36 595 99 Replacement compact filter Consists of: HEPA filter H13, 005 87 358 36 Fine dust filter F7 (10 pieces)
(4 pieces in one pack) wide band gas filter (50 % 005 87 358 38 Compact filter
Consists of: HEPA filter H13, active carbon, 50 % Puratex) Consists of: HEPA filter H13,
wide band gas filter (50 % wide band gas filter (50 %
active carbon, 50 % Puratex) active carbon, 50 % Puratex)
005 87 358 35 Option: Adhesive fume filter
(50 % active carbon, 50 %
Puratex)
Order No. Spare filter for WFE 2S: Order No. Spare filter for WFE 2ES: Order No. Spare filter WFE 2S/WFE 4S:
005 87 358 84 Fine dust filter F5 (10 pieces) 005 87 627 01 Fine dust filter F5 (10 pieces) 005 87 358 60 Filtering ash F7 for large
005 87 358 85 Fine dust filter F7 (10 pieces) Compact filter quantities of dust
005 87 358 83 Compact filter Consists of: HEPA filter H12, 005 87 359 24 Filtering fine dust for sticky of
Consists of: HEPA filter H13, wide band gas filter arrears (e.g. large quantities of
wide band gas filter (50 % active (10 % active carbonate foam) liquid flux)
carbon, 50 % Puratex)
005 87 358 95 Option: Adhesive fume filter
(50 % active carbon, 50 %
Puratex)
17
Tip Extraction
Tip Extraction
Weller® FE (Fume Extraction) soldering irons A safety rest with Stop + Go function switches
have a smoke tube adapted to the handle. the extraction system on when the FE soldering
When soldering the tube is positioned directly iron is removed from the safety rest and off af-
above the joint and collects any fumes produ- ter a short delay when the iron is replaced (WFE
ced. Fume extraction irons can be connected & WFE P only). Fume extraction attachments
to the Weller® Zero-Smog® Systems WFE, can be retro-fitted to non fume extraction
WFE P (both bench mounted units driving up Weller® soldering irons.
to 2 irons) or WFE 20D – a mobile unit driving
up to 40 irons.
18
Tip Extraction Units
Characteristics
WFE P
up to 2 workplaces
WFE
up to 2 workplaces
19
Tip Extraction
WFE Attributes
Small, portable, compressed air driven
fume extraction unit The fume extraction unit WFE requires clean Up to 2 FE soldering irons can be
and oil-free compressed air. The vacuum is ge- connected
nerated by a maintenance-free compressed air Maintenance-free compressed air
converter. The contaminated air is purified by a converter
pre-filter and main filter system. A compressed Portable unit for stand alone applications
air cleaning filter removes additional odours
caused by the compressed air. This highly
efficient filter system makes the WFE a genuine
air recovery system. The filter-lift system allows
fast and convenient filter cartridge replace-
ment. The FE (Fume Extraction) soldering irons
HEPA filter H13
are connected directly to the unit – additional
and
leads are not required.
wide band gas filter
ESD safe low sound level
WFE P Attributes
Small, portable, electrically driven
fume extraction unit The Weller® WFE P is a line voltage fume Up to 2 FE soldering irons can be
extraction unit designed to run with one or two connected
FE (Fume Extraction) soldering irons. The WFE P Electric vacuum pump to produce the
has an electric, long-life, soundproofed vacuum required vacuum
pump to produce the required vacuum – it does 2 power stages for higher extraction
not need a compressed air supply. The vacuum perfomance with 2 FE soldering irons
pump has two power settings which can be se- Portable unit for stand alone applications
lected by means of rocker switches depending
on the number of FE soldering irons connected
to the unit. This saves energy. The motor is
maintenance-free and has a thermal over load
to protect the unit. The filter lift system allows
HEPA filter H13
fast and convenient main filter replacement.
and
FE soldering irons are connected directly to unit
wide band gas filter
– additional leads are not required.
ESD safe low sound level
Technical Data
Maximum capacity 2 FE soldering irons Scope of supply
Sound level < 45 db (A) at 1 m distance
WFE P Fume extraction unit
Operating voltage 230 V / 50 Hz
Compact filter Fine dust pre-filter F7
Power input 70 W Consists of: HEPA filter H13, wide band gas filter
Maximum vacuum 30.000 Pa (50 % active carbon, 50 % Puratex)
Height 295 mm (11.6 in) Fine dust filter F7
Diameter 140 mm (5.5 in) Order No. 230V 005 36 386 99
Weight 4 kg / 8.8 lb Order No. 120V WFE2P
20
WFE 20D
Mobile, powerful, electronically
driven fume extraction unit Characteristics
Up to 5 Weller® FE (Fume Extraction) soldering controlled. Operating hours and filter conta- Attributes
irons can be connected directly to the fume mination level are also recorded electronically.
extraction unit WFE 20D. Using the Pipe System The filter system achieves a filtration rate of Up to 40 FE soldering irons can be
50 (available as accessory) up to 40 FE solde- 99,95 % as per EN 1822 with a particle size of connected
ring irons can be supported by the unit. The 0,12 μm. Electric driven, maintenance free turbine
powerful maintenance-free turbine generates produces the required vacuum
a vacuum of 12.000 Pa and is electronically 4 wheels to allow easy movement
of the unit
Mobile unit for central and stand alone
applications
Central installation for pipe systems up
to 200 m (7874 in)
The smoke absorption tube is integrated into can be driven from any Weller® power unit
the handle. It can be placed over the joint compatible with the rating of the iron or any
when soldering but can be retracted when Weller® rework station. The range of iron power
access to the joint is a problem and can also be ratings and the extensive range of solder tips
removed for cleaning. The irons are tempera- mean that there is an iron to suit all applica-
ture controlled, ergonomic and allow precise tions. The FE soldering irons are supplied with a
handling. These electronically controlled irons burn proof hose 5 mm (0.19 in) diameter, 2,5 m
(98.42 in) long.
ESD safe
005 32 152 99 FE 50M Soldering iron set 50 W / 24 V, Magnastat controlled with safety rest KH 20*.
Not available in US.
* Cleaning brush for FE tubes and fume extraction funnels are included in the scope of supply of the soldering irons
for use with KH 20 and KH 23 safety rests.
FE Attachments
A range of FE attachments are available to fit For Weller® soldering irons WP 120, WP 80,
standard Weller® soldering and desoldering WSP 80, WMP, MLR 21 or soldering irons with
irons to convert them to fume extraction handle diameter 10 –13 mm (0.39 – 0.51 in).
versions. The attachments are supplied with all Clip will be fixed with an silicone O-ring to the
necessary fittings and hoses. The performance soldering iron.
of the retro-fitted tools is not affected.
22
Accessories for FE Irons
23
Tip Extraction
The Weller® Stop + Go safety rests are recom- safety rest and off when the FE soldering iron
mended accessories for FE soldering irons is replaced in the safety rest. After a short delay
using the WFE or WFE P extraction units. A fibre to gather the fumes from any solder on the tip,
optic sensor switches the extraction unit on it switches the unit off. This saves the soldering
when the FE soldering iron is removed from the tip and reduces the running costs.
24
Accessories
for workbench installations
005 36 414 00 Extraction hose 40, ø 40 mm (1.5 in) without connecting elements.
Sold by metre. Plastic, grey / black, flexible.
005 36 415 99 Connecting element 40 – 50 for connecting extraction hose 40 and pipe system 50.
Rubber, black.
005 36 326 99 Extension hose DN 17 (13 x 3 mm), 5 m (198.85 in), ø 17 mm (0.6 in),
used where the fume extraction iron is further than 2,5 m (98.42 in) from the
pipe system 50.
Note: Connection nipple for hose 17 and adapter 17 will be required. Plastic, transparent.
005 87 358 65 Connection nipple for extension hose 17. Amend direction to read direct.
005 36 343 99 Adapter 17 for connection extension hose DN 17 with ø 5 mm (0.19 in)
extension hose of FE irons.
005 36 338 99 Connection nipple for 5 mm (0.19 in) diameter extraction hose to connect
FE soldering irons directly to pipe system 50. The connection nipple is screwed
at any point into the pipe system.
Order No. Spare filter for WFE: Order No. Spare filter WFE 20D: Order No. Spare filter for WFE P:
005 87 357 57 Compressed air - cleaning filter 005 87 358 37 Fine dust filter F5 005 36 410 99 Compact filter
005 36 410 99 Compact filter 005 87 358 36 Fine dust filter F7 Consists of: HEPA filter H13,
Consists of: HEPA filter H13, 005 87 358 38 Compact filter wide band gas filter (50 %
wide band gas filter (50 % Constists of: HEPA filter H13, active carbon, 50 % Puratex)
active carbon, 50 % Puratex) wide band gas filter (50 % 005 36 407 99 Compact filter
005 36 407 99 Compact filter active carbon, 50 % Puratex) Consists of: HEPA filter H13,
Consists of: HEPA filter H13, wide band gas filter (100 %
wide band gas filter (100 % active carbon)
active carbon) 005 36 421 99 Fine dust filter F7 (3 pieces)
005 36 421 99 Fine dust filter F7 (3 pieces) 005 36 597 99 Compact filter with enlarged
005 36 597 99 Compact filter with enlarged pre-filter
pre-filter
25
Tip Extraction
Installation Options
KH E
Stop + Go-support
WDD 161V
WFE P
soldering
iron
desoldering
iron
right angle
pipe 50 pipe 50 T-piece 50 pipe 50 branch 50
005 36 322 99 005 36 323 99 005 36 344 99 005 36 323 99 005 36 321 99
end seal 50
extraction hose 5 mm 005 36 324 99
pipe clamps 50
> 2,5 m bis max. 10 m connecting nipple 005 36 329 99
005 25 410 00 double socket 50 for extraction hose
WSD 81 connecting element 40-50 005 36 319 99 5 mm
005 36 415 99 connecting nipple pipe 50
005 36 338 99 for hose 17
connecting 005 36 323 99
element 40-50 005 36 358 65
005 36 415 99
WMD 3
end seal 50
ESD
SAF
E
005 36 324 99
extraction
hose 40
005 36 414 00
extension hose 17
005 36 326 99
adapter 17
005 36 343 99
WFE 20D
RS 232 cable (2 m)
005 31 191 99
remote control
005 87 359 09
26
Pipe Systems for Tip and Volume Extraction
Tip extraction systems demand a high quality, constant level of vacuum Volume extraction systems require a large volume of air to be extracted
across the installation. To achieve this it is necessary to use a pipe system and the level of vacuum is of lesser importance. This means that a rela-
with a relatively small diameter. The Weller® pipe system 50 allows tively large diameter pipe system is required. If the pipe diameter is too
extraction installations of up to 200 m (7874 in) when used with the small the flow resistance is increased and extraction capacity reduced.
WFE 20D unit in a stand alone system. The pipe sections are designed to The pipe system 75 allows installations up to 30 m (1191.1 in) with
join together and have internal sealing bushes. In a central system, the FE the WFE 4S used in a stand alone system. The pipe sections are designed
soldering irons are connected directly to the fume extraction units. to join together and have internal sealing bushes.
005 36 322 99 005 87 358 69 Right angle pipe, 90°, 0,2 m (7.87 in),
with seal at one end. PEHD*, black.
005 36 344 99 005 87 358 71 T-piece, 2 x 90°, 0,5 m (19.68 in), with 3 seals.
PEHD*, black.
005 36 329 99 005 87 358 64 Pipe clamps for pipes, e.g. for securing to wall.
Plastic, grey.
27
G E R M A N Y USA FRANCE
Cooper Tools GmbH Cooper Hand Tools Cooper Tools S.A.S.
Carl-Benz-Straße 2 World Headquarters 25 Rue Maurice Chevalier BP 46
74354 Besigheim 1000 Lufkin Road 77832 Ozoir-la-Ferrière Cedex
Tel: (07143) 580-0 Apex, NC 27539 USA Tel: (01) 60.18.55.40
Fax: (07143) 580-108 Tel: (919) 387 0099 Fax: (01) 64.40.33.05
Fax: (919) 387 2614
C A N A D A CHINA AUSTRALIA
Cooper Hand Tools – Canada Cooper Hand Tools Cooper Tools Pty. Limited
164 Innisfil Street 18th Floor, Yu An Building P.O. Box 366
Barrie, Ontario 738 Dongfang Road 519 Nurigong Street
Canada L4N 3E7 Pudong, Shanghai Albury, N.S.W. 2640
Tel: (705) 728 5564 200122 China Australia
Fax: (800) 403 8665 Tel: (21) 5111 8300 Tel: (2) 6058-0300
Fax: (21) 5111 8446 Fax: (2) 6021-7403
www.cooperhandtools.com/europe
www.weller.eu