Anda di halaman 1dari 5

Installing Windows 7: Part 1

SETTING BIOS - PART 1 Ok, if you finish read part one i consider you already set the BIOS order to boot from CD/DVD. Here in part one it will cover boot from CD and customizing hard disk and partition for Windows 7 installation. Installing Windows 7: Part 1 1. make sure the Windows 7 DVD already in your DVD Drives. 2. Start you PC/Notebook and wait until it prompt "PRES ANY KEY TO BOOT FROM CD/DVD..." (figure 2), now press any key (it will only wait about 5-6 second, if you have new laptop that have no operating system it will automatically boot from DVD).

(figure 2:images from: http://www.microsoft.com/)

3.Then this screen will appear. just wait untill it finish loading files.

4. After that the screen (figure 3) will appear. Here just click next ( i recommend new user just left the setting default)

figure 3 5. After click next you will see the screen below (figure 4). Select Install Now

figure 4 6. Then select agree by checking the box. click next.

figure 5 7. When you arrive here (figure 6), you can select upgrade or costum: UPGRADE: recomend to those who already have VISTA installed. COSTUM : For other version such XP, 98, 2000, Me here for both vista and XP i suggest custom for fresh installation

figure 6

8. After select custom installation select the partition you wish to install (select C drive recommended) and hit next and skip no 9 and 10. If you have new HDD select advance driver option.

figure 7

figure 8 9. For creating new partition only! select new.

10. Choose the capacity for your new C drive then apply. (figure 9) (below recommended for end user, advance user=u know which better rite) 40GB: set to 20GB for c(20000MB) 80GB: set to 30GB for c 160GB: set to 60GB for c(20000MB) 250GB: set to 60-80GB for c(20000MB) others (for c normally min 50 and max 100)

figure 9 11. Then click next, now just wait and let it finish the installation.

figure 10

figure 11 at this point your PC/Notebook will restart, and you have to do nothing here.

continue part 2
Installing Windows 7: Part 2
SETTING BIOS - PART 2 Here will cover the final installation for windows 7. 1. let it finish the installation (may take several minutes time to finish)

2. Now here Insert your name (nickname or whatever you like), click next and set your password or just left it blank.

3. Here you can insert you cd-key to activate or just left it blanks if you plan to do it later.

4. Set the time. (up) 5.After that if you have wireless you can directly connect to our preferred network or skip.

Now if you see this screen, the installation FINISH.

Anda mungkin juga menyukai