Logical Name
3GPP Name
3GPP Reference
GUI Name
Parameter Description This parameter indicates the transport time delay This parameter indicates the transport delay jitter The parameter indicates physical adjacent This parameter identifies which frequency When the neighboring cell is GSM cell, its BSIC (Base This parameter indicates BCCH absolute This parameter indicates BSC Identifier, This parameter is neighboring cell identity, it is valid only This parameter indicates whether the GSM cell is This parameter indicates the LAC of the neighboring
Instance
N/A
N/A
N/A
N/A
GSM Neighboring Cell GSM Neighboring Cell GSM Neighboring Cell GSM Neighboring Cell GSM Neighboring Cell GSM Neighboring Cell GSM Neighboring Cell GSM Neighboring Cell
TS 25.331: Base Station "RRC Base Station Colour Code Protocol Colour Code (BCC) Specification" TS 25.331: "RRC BCCH Protocol ARFCN Specification" BSC Identifier
N/A
N/A TS 25.423: "UTRAN Iur interface RNSAP signalling" N/A TS 25.423: "UTRAN Iur interface RNSAP signalling"
externalGsm CI Cell
Cell Identifier
This Maximum parameter Allowed UL indicates the TX maximum Power(dBm) allowed MCC Mobile uniquely externalGsm MCC[4] Country identifies the Cell Code country that the UE users This Mobile parameter externalGsm MNC[4] Network indicates the Cell Code LAC of the neighboring This parameter externalGsm MNCBcdCod MNC BCD N/A N/A indicatesthe Cell eLen[4] Code Length code length of the MNC When the TS 25.331: Network neighboring externalGsm "RRC Network NCC Colour Code cell is GSM Cell Protocol Colour Code (NCC) cell, its BSIC Specification" (Base The PLMN parameter externalGsm Number of PLmnNum N/A N/A indicates Cell Sharing the PLMN GSM Cell number of TS 25.423: The RAC; "UTRAN Iur parameter externalGsm Routing Area RAC Routing Area interface indicates Cell Code Code RNSAP RAC of the signalling" Gsm cell. TS 25.423: This SNAC; "UTRAN Iur Shared parameter externalGsm Shared SNAC[4] Network interface indicates the Cell Network Area Code RNSAP shared Area Code signalling" network area This Shared parameter externalGsm Network SNACNum N/A N/A indicates the Cell Area Code number of Number shared The Physical parameter externalUtran AdjPhyCId N/A N/A Adjacent indicates Cell Cell Identity physical adjacent cell TS 25.423: The "UTRAN Iur parameter externalUtran C-Id; Cell CId Cell Identity indicates the interface Cell Identifier RNSAP neighboring signalling" cell identity, maximum externalGsm MaxULTxPwr allowed UL Cell TX power TS 25.331: "RRC Protocol Specification" TS 25.423: MCC; Mobile "UTRAN Iur Country interface Code RNSAP signalling" TS 25.423: MNC; Mobile "UTRAN Iur Network interface Code RNSAP signalling"
GSM Neighboring Cell GSM Neighboring Cell GSM Neighboring Cell GSM Neighboring Cell GSM Neighboring Cell GSM Neighboring Cell GSM Neighboring Cell GSM Neighboring Cell GSM Neighboring Cell
Closed Loop Mode1 externalUtran Clm1SuptInd Support Cell Indicator; Diversity Continuous Packet externalUtran CpcDtxDrxSu Connectivity Cell ptInd DTX-DRX Support Continuous Packet externalUtran CpcHslessSu Connectivity Cell ptInd HS-SCCH less Support externalUtran DIurCmbInd Cell
This Closed Loop parameter Mode 1 indicates if Support the Indicator neighboring This CPC DTXparameter DRX indicates Support whether Indicator continuous Max U CPC This HS-SCCH parameter less Support indicates Indicator E whether DTX Cycle continuous This DRNC parameter Diversity N/A N/A defines the Combination neighboring Indicator cell diversity TS 25.423: This SRNC "UTRAN Iur parameter Diversity Diversity interface defines the Control Field Combination RNSAP neighboring Indicator signalling" cell diversity This 64QAM DL parameter N/A N/A Support indicates Indicator whether the neighboring UARFCN TS 25.331: This downlink "RRC parameter DUARFCN (Nd); DL Protocol indicates the UARFCN; Specification" occupied UARFCN; TS25.423 downlink TS 25.423: The Cell E-DCH "UTRAN Iur parameter Capability HARQ interface indicates the Container Combining RNSAP E-DCH FDD Capability signalling" HARQ TS 25.423: This Cell "UTRAN Iur parameter Capability E-DCH SF interface indicates the Container Capability RNSAP E-DCH SF FDD signalling" capability of TS 25.423: This Cell "UTRAN Iur 2ms E-TTI parameter Capability Support interface indicates if Container Indicator RNSAP the FDD signalling" neighboring Neighboring This Cell Cell parameter Capability TS 25.423 Enhanced F- indicates Container DPCH whether the FDD Support neighboring
TS 25.423: "UTRAN Iur interface RNSAP signalling" TS 25.423: "UTRAN Iur interface RNSAP signalling" TS 25.423: "UTRAN Iur interface RNSAP signalling"
Cell externalUtran FDpchSuptIn Capability Cell d Container FDD externalUtran FlexMacdSup N/A Cell tInd Frequency Band externalUtran FreqBandInd Indicator; Cell Frequency band externalUtran HspaSptMeth N/A Cell
TS 25.423: "UTRAN Iur interface RNSAP signalling" N/A TS 25.423: "UTRAN Iur interface RNSAP signalling" N/A
F-DPCH Support Indicator Flexible MAC-d PDU Size Support Indicator Frequency Band Indicator HSPA Support Method
TS 25.423: "UTRAN Iur externalUtran LAC interface Cell RNSAP signalling" TS 25.423: "UTRAN Iur externalUtran Max UE MaxDtxCyc interface Cell DTX Cycle RNSAP signalling" TS 25.423: Maximum "UTRAN Iur externalUtran MaxRACHTx Allowed UL interface Cell Pwr Tx Power RNSAP signalling" TS 25.423: MCC; Mobile "UTRAN Iur externalUtran MCC[4] Country interface Cell Code RNSAP signalling" TS 25.423: MCC; Mobile "UTRAN Iur externalUtran MCC[4] Country interface Cell Code RNSAP signalling" LAC; Location Area Code externalUtran Mimo64Qam N/A Cell SuptInd N/A
Max UE DTX Cycle (subframes) RACH Maximum Allowed UL TX Power(dBm) Mobile Country Code Mobile Country Code Mimo64Qam Support Indicator MIMO Support Indicator
N/A
This parameter indicates whether the neighboring This parameter indicates whether the neighboring This parameter indicates the frequency band of the This parameter indicates the supporting type of DCH, This parameter indicates the LAC of the neighboring This parameter indicates the maximum UE DTX This parameter is the maximum allowed MCC uniquely identifiesthe country that the UE users MCC uniquely identifiesthe country that the UE users This parameter indicates whether the neighboring This parameter indicates whether the neighboring
TS 25.423: MNC; Mobile "UTRAN Iur Network interface Code RNSAP signalling" Primary TS 25.423: CPICH "UTRAN Iur Power; interface Primary RNSAP CPICH Tx signalling" N/A
Mobile Network Code Primary CPICH Power(dBm) Primary CPICH Power Configuration Tag PLMN Number of Sharing the Cell Cell Primary Scrambling Code
N/A
N/A
TS 25.331: "RRC Protocol Specification" TS 25.423: TS 25.423: RAC; "UTRAN Iur Routing Area interface Code RNSAP signalling" TS 25.423: RNC-ID; "UTRAN Iur RNC interface Identifier RNSAP signalling" TS 25.423: SAC; "UTRAN Iur Service Area interface Code RNSAP signalling" N/A N/A
RNC Identity of Adjacent cell Service Area Code for BC Domain SACB Configuration Tag Service Area Code for CS and PS Domain Shared Network Area Code
TS 25.423: SAC; "UTRAN Iur Service Area interface Code RNSAP signalling" TS 25.423: SNAC; "UTRAN Iur Shared interface Network RNSAP Area Code signalling"
MNC identifies a specific PLMN inside one country This parameter indicates PCPICH transmission This parameter indicates whether PCPICH The parameter indicates PLMN number of The cell primary scrambling code is used to distinguish This parameter indicates routing area code of the This parameter indicates the RNC ID of the This parameter indicates the BC domain service area This parameter indicates whether SACB This parameter indicates the CS + PS domain This parameter indicates the shared network area
TS 25.423: "UTRAN Iur maxnoofSNA interface s RNSAP signalling" STTD TS 25.423: Support "UTRAN Iur Indicator; interface STTD RNSAP Indicator; signalling" N/A
Shared Network Area Code Number STTD Support Indicator Support R5/R6Conge stion Detection Indicator TUTRANGPS Measuremen t Support Indicator TX Diversity Indicator
externalUtran TutranGpsSp N/A Cell tInd Tx Diversity Indicator; TX Diversity Indicator; Transmit
N/A
gsmRelation CId
TS 25.423: "UTRAN Iur interface RNSAP signalling" TS 25.423: URA-ID; "UTRAN Iur URA ID; interface URA Identity RNSAP signalling" TS 25.331: "RRC maxURA Protocol Specification" UARFCN TS 25.331: uplink (Nu); "RRC UL Protocol UARFCN; Specification" UARFCN; TS25.423 TS 25.423: "UTRAN Iur C-Id; Cell interface Identifier RNSAP signalling" N/A
URA Identity
URA Number
UUARFCN
Cell Identity
gsmRelation
N/A
This parameter indicates the number of shared This parameter indicates whether STTD can This parameter indicates if the neighboring This parameter indicates if the neighboring This parameter indicates if the transmit diversity is This parameter indicates the UTRAN registration This parameter indicates the number of UTRAN This parameter indicates the occupied uplink carrier Cell Identity is valid only in the RNC where the cell locates. This parameter describes the neighboring The parameter indicates neighboring physical
UTRAN Cell
nodeB
AuditTimer
nodeB
DivContrlFiel d
nodeB
NodebNo
nodeB
NodeBType
nodeB
SuptCgtDetIn d
nodeB
TimeDelay
nodeB
TimeDelayJitt er
nodeB
HsSharMetho d
nodeB
HsSharUptPr d
This parameter N/A N/A indicates the audit timer of Node B TS 25.433: When there "UTRAN Iub exists a Diversity Diversity Interface radio link Control Field Control Field NBAP and needs to Signalling" build another This parameter N/A N/A NodeB No. indicates the Node B number, This parameter N/A N/A NodeB Type indicates the Node B type. Support This R5/R6 parameter N/A N/A Congestion indicates Detection whether Indicator Node B This parameter Transport N/A N/A indicates Time Delay theIub inferface This Transport parameter N/A N/A Time Delay indicates the Jitter(ms) Iub interface transport External This UTRAN Cell parameter N/A N/A Dual indicates Cell+MIMO whether the Support neighbouring Co-NodeB This HS-PDSCH parameter N/A N/A Code indicates the Sharing control Method method to Co-NodeB This HS-PDSCH parameter N/A N/A Code indicates the Sharing period to Update update the Cell MIMO This Precoding parameter N/A N/A Weight Set indicates Restriction whether Support Precoding
Node B
Node B
Node B
Node B
Node B
Node B
Node B
Node B
Node B
UTRAN Cell
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Reserved Parameter 1 for External UTRAN Cell Reserved Parameter 10 for External UTRAN Cell Reserved Parameter 11 for External UTRAN Cell Reserved Parameter 12 for External UTRAN Cell Reserved Parameter 13 for External UTRAN Cell Reserved Parameter 14 for External UTRAN Cell Reserved Parameter 15 for External UTRAN Cell Reserved Parameter 16 for External UTRAN Cell Reserved Parameter 17 for External UTRAN Cell Reserved Parameter 18 for External UTRAN Cell Reserved Parameter 19 for External UTRAN Cell
Reserved Parameter 1 for External UTRAN Cell Reserved Parameter 10 for External UTRAN Cell Reserved Parameter 11 for External UTRAN Cell Reserved Parameter 12 for External UTRAN Cell Reserved Parameter 13 for External UTRAN Cell Reserved Parameter 14 for External UTRAN Cell Reserved Parameter 15 for External UTRAN Cell Reserved Parameter 16 for External UTRAN Cell Reserved Parameter 17 for External UTRAN Cell Reserved Parameter 18 for External UTRAN Cell Reserved Parameter 19 for External UTRAN Cell
N/A
N/A
N/A
Reserved Parameter 2 for External UTRAN Cell Reserved Parameter 20 for External UTRAN Cell Reserved Parameter 3 for External UTRAN Cell Reserved Parameter 4 for External UTRAN Cell Reserved Parameter 5 for External UTRAN Cell Reserved Parameter 6 for External UTRAN Cell Reserved Parameter 7 for External UTRAN Cell Reserved Parameter 8 for External UTRAN Cell Reserved Parameter 9 for External UTRAN Cell
Reserved Parameter 2 for External UTRAN Cell Reserved Parameter 20 for External UTRAN Cell Reserved Parameter 4 for External UTRAN Cell
N/A
Reserved Parameter 4 External for External UTRAN Cell UTRAN Cell Reserved Parameter 5 External for External UTRAN Cell UTRAN Cell Reserved Parameter 6 External for External UTRAN Cell UTRAN Cell Reserved Parameter 7 External for External UTRAN Cell UTRAN Cell Reserved Parameter 8 External for External UTRAN Cell UTRAN Cell External UTRAN Cell
N/A
N/A
N/A
N/A
N/A
nodeB
NodebNo
N/A
N/A
gsmRelation
N/A
Reserved Parameter 9 for External UTRAN Cell This parameter NodeB No. indicates the Node B number, Does The Neighbouring parameter Cell Belong indicates to Self whether the Physical neighboring
Node B
N/A
N/A
Routing Area Routing Area External Colour Code Colour Code GSM Cell
CIntra
CIntra
CIntra
EvtMeasEcN N/A o
CIntra
EvtMeasRSC N/A P
CIntra
PrdMeasEcN N/A o
CIntra
PrdMeasRSC N/A P EvtRptAmou nt[MAX_INT Amount of RA_MEAS_E reporting VENT] EvtRptInterva l[MAX_INTR Reporting A_MEAS_EV interval ENT] Filter coefficient
Intra
Intra
Intra
FilterCoeff
Detected Set Measuremen N/A t Configuration Index for Detected Set Measuremen N/A t Configuration Index for UE Event Report N/A Configuration Index for CPICH Ec/No UE Event Report N/A Configuration Index for CPICH Period Report N/A Configuration Index for CPICH Ec/No Period Report N/A Configuration Index for CPICH TS 25.331: Amount of "RRC Reporting for Protocol Event Specification" 1A/1B/1C/1J Reporting TS 25.331: Interval for "RRC Event Protocol 1A/1B/1C/1J( Specification" ms) TS 25.331: "RRC Filter Protocol Coefficient Specification"
Intra
This parameter indicates the detected set measuremen This parameter indicates the detected set measuremen This parameter indicates the UE event report This parameter indicates the UE event report This parameter indicates the period report configuration This parameter indicates the period report configuration This parameter indicates the maximum times to This parameter indicates the time interval to report the This parameter indicates the filtering factor that This TS 25.331: parameter "RRC Hysteresis(d indicates the Protocol B) hysteresis Specification" used when
UTRAN Cell and Service Related UTRAN Cell and Service Related UTRAN Cell and Service Related UTRAN Cell and Service Related UTRAN Cell and Service Related UTRAN Cell and Service Related UTRAN Cell and Service Related UTRAN Cell and Service Related UTRAN Cell and Service Related UTRAN Cell and Service Related
Intra
IntraMeasCfg N/A No
N/A
Intra
N/A
Intra
Intra
Intra
Intra
Intra
Intra
Intra
Intra
Intra
MeaEvtId[MA TS 25.331: IntraIntraX_INTRA_M "RRC frequency frequency EAS_EVENT Protocol event identity Event Identity ] Specification" Event Number of MeasEvtNum N/A N/A Intrafrequency Measuremen TS 25.331: MeasQuantit Measuremen "RRC Measuremen y t quantity Protocol t Quantity Specification" Amount of TS 25.331: Reporting in PrdRptAmou Amount of "RRC Period nt reporting Protocol Report Specification" Criteria Reporting TS 25.331: Interval in PrdRptInterv Reporting "RRC Period al interval Protocol Report Specification" Criteria(ms) Replacement RplcActThr[M TS 25.331: Replacement Activation AX_INTRA_ "RRC activation Threshold MEAS_EVEN Protocol threshold for Event 1C T] Specification" and 1J Periodical TS 25.331: Reporting / "RRC Report RptCrt Event Protocol Criteria Trigger Specification" Reporting RptDeactThr[ TS 25.331: Reporting Reporting MAX_INTRA "RRC Deactivation deactivation _MEAS_EVE Protocol Threshold threshold NT] Specification" for Event 1A Reporting RptRange TS 25.331: Reporting Range [MAX_INTRA "RRC Range Constant for _MEAS_EVE Protocol Constant Event NT] Specification" 1A/1B(dB)
This parameter indicates the configuration index of the This parameter indicates the function of different This parameter indicates the event ID triggered by This parameter indicates number of events This parameter indicates the measuremen t quantity of This parameter indicates the maximum times to This parameter indicates the reporting interval for This parameter indicates the minimum number of This parameter indicates the report rules of the intraThis parameter indicates the maximum number of This parameter controls the triggering of event 1a/1b.
UTRAN Cell and Service Related UTRAN Cell and Service Related UTRAN Cell and Service Related UTRAN Cell and Service Related UTRAN Cell and Service Related UTRAN Cell and Service Related UTRAN Cell and Service Related UTRAN Cell and Service Related UTRAN Cell and Service Related UTRAN Cell and Service Related UTRAN Cell and Service Related
Intra
ThreshUsedF Threshold req[MAX_INT used RA_MEAS_E frequency VENT] TrigTime[MA X_INTRA_M Time to EAS_EVENT trigger ] W[MAX_INT RA_MEAS_E W VENT]
Intra
Threshold of TS 25.331: the Quality "RRC of the Used Protocol Frequency Specification" for Event TS 25.331: "RRC Time To Protocol Trigger(ms) Specification"
Intra
externalUtran IurDcHsdsSu N/A Cell ptInd MCC4RANS haring [DBS_RR_M N/A AX_NUM_SH ARED_PLMN MinCEPerce nt [DBS_RR_M N/A AX_NUM_SH ARED_PLMN MNC4RANS haring [DBS_RR_M N/A AX_NUM_SH ARED_PLMN PlmnNum N/A
nodeB
nodeB
nodeB
nodeB
CelSel
CelSel
This parameter indicates the absolute threshold This parameter indicates the time difference This TS 25.331: parameter is "RRC Weight for used for Protocol Event 1A/1B quality Specification" judgment of This Possible parameter Secondary N/A describes Serving Cell the Possible ID Secondary This Dual-Cell HSparameter DSCH N/A indicate Support whether Indication Dual-Cell HSMCC for RAN MCC for N/A Sharing(MCC RAN Sharing ) Minimal Minimal percent of percent of N/A CE can be CE can be used by the used by the PLMN PLMN for MNC for RAN MNC for N/A Sharing(MNC RAN Sharing ) Number of Number of PLMN for N/A PLMN for RAN Sharing RAN Sharing while carrier sharing QqualminTS 25.331: offset is "RRC Qqualminused for Protocol offset(dB) restricting Specification" PLMN pingThis Qqualminparameter N/A offset indicates Present whether the Qrxlevmin-
UTRAN Cell and Service Related UTRAN Cell and Service Related UTRAN Cell and Service Related
Node B
Node B
Node B
Node B
UTRAN Cell
UTRAN Cell
CelSel
CelSel
N/A
nodeB
AdjType
Adjacent Cell Uplink N/A Enhanced Layer 2 Support Switch of CS 64kbps N/A Establishmen t for External UTRAN Cell Maximum Bit Rate on DL N/A DCH for NRT PS RAB in Maximum Bit Rate on EN/A DCH for NRT PS RAB in Maximum Bit Rate on UL N/A DCH for NRT PS RAB in Maximum Bit Rate on DL N/A DCH for RT PS RAB in External Maximum Bit Rate on EN/A DCH for RT PS RAB in External Maximum Bit Rate on UL N/A DCH for RT PS RAB in External TS 25.433: Adjustment "UTRAN Iub Type for DL Interface Power NBAP Balance Signalling"
QrxlevminOff set is used for restricting PLMN pingpong This parameter indicates whether the QrxlevminThis parameter indicates whether the adjacent cell This parameter indicates whether establishing This parameter indicates the maximum bit rate on DL This parameter indicates the maximum bit rate on UL EThis parameter indicates the maximum bit rate on UL This parameter indicates the maximum bit rate on DL This parameter indicates the maximum bit rate on UL EThis parameter indicates the maximum bit rate on UL This parameter indicates the balancing type of the
UTRAN Cell
UTRAN Cell
External UTRAN Cell and PLMN External UTRAN Cell and PLMN External UTRAN Cell and PLMN External UTRAN Cell and PLMN External UTRAN Cell and PLMN External UTRAN Cell and PLMN External UTRAN Cell and PLMN
Node B
Altitude
Direction of Altitude
Altitude
Geographical externalUtran AnteLatitude Coordinates Cell Sign >Latitude Sign Geographical externalUtran AnteLongitud Coordinates Cell e > Degrees Of Longitude externalUtran AnteType Cell
N/A
This parameter N/A indicates whether the neighboring TS 25.413: This Cell Altitude parameter is "UTRAN Iu for Cell Interface one of the Center(m) RANAP parameters Signalling" to describe TS 25.413: This "UTRAN Iu parameter is Altitude Interface one of the Accurary(m) RANAP parameters Signalling" to describe TS 25.413: This Direction of parameter "UTRAN Iu Altitude for Interface indicates the Cell Center altitude RANAP Signalling" direction of TS 25.413: This "UTRAN Iu parameter Antenna Interface indicates the Altitude(m) RANAP altitude of Signalling" the TS 25.413: Direction of Direction of Antenna "UTRAN Iu Antenna Interface Altitude. This Altitude RANAP parameter Signalling" indicates the TS 25.413: This Degree of "UTRAN Iu parameter Antenna Interface indicates the Latitude RANAP geographical Signalling" latitude TS 25.413: This "UTRAN Iu parameter Antenna Interface indicates the Latitude Sign RANAP latitude Signalling" direction of TS 25.413: This Degrees of "UTRAN Iu parameter Antenna Interface indicates the Longitude(de RANAP longitude of gree) Signalling" the This parameter Antenna N/A indicates the Type type of the transmission TS 25.331: Cell Cell "RRC description Description type, which Protocol Specification" Type indicates the TS 25.413: type to
N/A
Geographical Area
Confidence
Inner Angle
Geographical externalUtran Coordinates LatitudeSign Cell >Latitude Sign externalUtran Longitude Cell Geographical Coordinates > Degrees Of Longitude
Offset angle
PolygonexternalUtran PolygonPoint >Geographic Cell Num al Coordinates Geographical PolyLatitude[ externalUtran Coordinates MAX_POINT Cell > Degrees _NUM] Of Latitude Geographical PolyLatitudeS externalUtran Coordinates ign[MAX_POI Cell >Latitude NT_NUM] Sign
TS 25.413: "UTRAN Iu Interface RANAP Signalling" TS 25.413: "UTRAN Iu Interface RANAP Signalling" TS 25.413: "UTRAN Iu Interface RANAP Signalling" TS 25.453: "UTRAN Iupc interface Positioning TS 25.413: "UTRAN Iu Interface RANAP Signalling" TS 25.413: "UTRAN Iu Interface RANAP Signalling" TS 25.413: "UTRAN Iu Interface RANAP Signalling" TS 25.413: "UTRAN Iu Interface RANAP Signalling" TS 25.413: "UTRAN Iu Interface RANAP Signalling" TS 25.413: "UTRAN Iu Interface RANAP Signalling" TS 25.413: "UTRAN Iu Interface RANAP Signalling"
Cell Radius
Confidence( %)
Inner Angle Degrees of Latitude for Cell Center(degre e) Latitude Sign for Cell Center Degrees of Longitude for Cell Center(degre e) Offset Angle
Polygon Point Number Degree of Polygon Point Latitude(degr ee) Polygon Point Latitude Sign
This parameter is one of the parameters to describe This parameter indicates the geographical area report This parameter is one of the parameters to describe This parameter indicates the inner angel of the This parameter indicates the absolute value of the This parameter indicates the latitude direction of This parameter indicates the value of the longitude This parameter indicates the offset angle of the This parameter identifies how many points This parameter indicates the absolute value of the This parameter indicates the latitude direction of
TS 25.413: Geographical PolyLongitud "UTRAN Iu externalUtran Coordinates e[MAX_POIN Interface Cell > Degrees T_NUM] RANAP Of Longitude Signalling" externalUtran MNCBcdCod N/A Cell eLen[4] N/A
Degrees of Polygon Point Longitude(de gree) MNC BCD Code Length Access Class N Barred Indicator (N=0..15) Cell Barred Indicator
CelSel
CelSel
CelSel
TS 25.331: "RRC ACBarredOm Access Protocol cr Class Barred Specification" TS 25.304: TS 25.331: "RRC CellBarredInd Cell Barred Protocol Specification" TS 25.304: TS 25.331: Cell "RRC CellRsvExt Reservation Protocol Extension Specification" TS 25.304: CId N/A N/A
CelSel
Cell Identity
CelSel
CelSel
CelSel
CelSel
CelSel
Increment to the Minimum DltaQRxLev Required Min Received Level in the Increment to the Minimum DltaQRxLev Required MinPr Received Level in the HCS Serving TS 25.304: Cell HcsSrvCelInf "UE N/A Information oPre Procedures Configuration in Idle Mode" Tag IntraTS 25.331: Intrafrequency "RRC frequency InFreqReselI cell reProtocol Cell nd selection Specification" Reselection indicator TS 25.304: Indicator InterTS 25.331: Interfrequency "RRC frequency InterFreqSf ScalingFactor Protocol Scaling for Specification" Factor for Treselection TS 25.304: Treselection
TS 25.304: "UE DeltaQrxlevm Procedures in in Idle Mode" TS 25.331: TS 25.304: "UE N/A Procedures in Idle Mode"
This parameter indicates the value of the polygon This parameter indicatesthe code length of the MNC This parameter is the access class barred indicator for This parameter is cell barred indicator. If the cell This parameter is cell reservation extension Cell Identity is valid only in the RNC where the cell locates. This parameter indicates the extension of Qrxlevmin, This parameter is a switch indicating whether This parameter indicates whether HCS serving This parameter is intrafrequency cell This parameter indicates the scaling factor for cell
UTRAN Cell
UTRAN Cell
UTRAN Cell
UTRAN Cell
UTRAN Cell
UTRAN Cell
UTRAN Cell
UTRAN Cell
UTRAN Cell
CelSel
CelSel
InterRatSf
CelSel
InterRatSfPre N/A
CelSel
NCr
NCR
CelSel
NoHcsNCr
NonHCS_NCR
CelSel
NonNoHcsTCrMa HCS_TCrma x x NonNoHcsTCrMa HCS_TCRm xHyst axHyst Cell OperatorUseI Reserved for nd operator use
CelSel
CelSel
CelSel
CelSel
QHcsEcNo
Qhcs
CelSel
QHcsRSCP
Qhcs
TS 25.304: "UE Procedures in Idle Mode" TS 25.331: "RRC Protocol Specification" TS 25.304: TS 25.304: "UE Procedures in Idle Mode" TS 25.331: "RRC Protocol Specification" TS 25.304: TS 25.331: "RRC Protocol Specification" TS 25.304: TS 25.331: "RRC Protocol Specification" TS 25.304: TS 25.331: "RRC Protocol Specification" TS 25.304: TS 25.331: "RRC Protocol Specification" TS 25.304: TS 25.304: "UE Procedures in Idle Mode" TS 25.331: "RRC Protocol Specification" TS 25.304: TS 25.331: "RRC Protocol Specification" TS 25.304:
Interfrequency Scaling Factor for Treselection Inter-RAT Scaling Factor for Treselection Inter-RAT Scaling Factor for Treselection Configuration Maximum Number of Cell Reselections (NCR) Maximum Number of Cell Reselections in Case of Duration for Evaluating Allowed Amount of Cell NonHCS_TCRm axHyst Cell Reserved for Operator Use Inter-System Information Configuration Tag Quality Threshold Level for Applying Prioritised Quality Threshold Level for Applying Prioritised
If UE is not detected in high mobility state, the cell This parameter indicates the scaling factor for cell If UE is not detected in high mobility state, the cell This parameter indicates the maximum number of If UE is detected in high mobility state, the cell This parameter indicates the duration for evaluating This parameter indicates the additional time period This parameter is cell reserved indicator for operator This parameter is a switch indicating whether interThis parameter indicates the quality threshold This parameter indicates the quality threshold
UTRAN Cell
UTRAN Cell
UTRAN Cell
UTRAN Cell
UTRAN Cell
UTRAN Cell
UTRAN Cell
UTRAN Cell
UTRAN Cell
UTRAN Cell
UTRAN Cell
CelSel
QHyst1S
Qhyst1s
CelSel
CelSel
QHyst1SPch
Qhyst1s, PCH
CelSel
QHyst2S
Qhyst2s
CelSel
CelSel
QHyst2SPch
Qhyst2s, PCH
CelSel
QQualMin
Qqualmin
CelSel
QRxLevMin
CelSel
QualMeas
CelSel
SHCSRat
CelSel
SHCSRatPre N/A
TS 25.331: "RRC Protocol Specification" TS 25.304: TS 25.331: "RRC Protocol Specification" TS 25.304: TS 25.331: "RRC Protocol Specification" TS 25.304: TS 25.331: "RRC Protocol Specification" TS 25.304: TS 25.331: "RRC Protocol Specification" TS 25.304: TS 25.331: "RRC Protocol Specification" TS 25.304: TS 25.304: "UE Procedures in Idle Mode" TS 25.331: TS 25.304: "UE Procedures in Idle Mode" TS 25.331: TS 25.331: "RRC Protocol Specification" TS 25.304: TS 25.304: "UE Procedures in Idle Mode" TS 25.331: TS 25.304: "UE Procedures in Idle Mode"
Reselection Hysteresis 1 of Serving Cell (QHyst1s)(dB Reselection Hysteresis 1 of Serving Cell for UE in Reselection Hysteresis 1 of Serving Cell for UE in Reselection Hysteresis 2 of Serving Cell (QHyst2s Reselection Hysteresis 2 of Serving Cell for UE in Reselection Hysteresis 2 of Serving Cell for UE in Minimum Required Quality Level in the Cell (Qqualmin)(d Minimum Required Received Level in the Cell Measuremen t Quantity for Cell Selection and Inter-System Measuremen t Trigger Threshold for HCS Cell
This parameter indicates the hysteresis value for This parameter indicates the hysteresis value This parameter indicates the hysteresis value This parameter indicates the hysteresis value for This parameter indicates the hysteresis value This parameter indicates the hysteresis value This parameter indicates the minimum required This parameter indicates the minimum required This parameter indicates the measuremen t quantity for This parameter indicates the inter-RAT measuremen This SHCS, RAT parameter is Configuration a switch Tag which indicates
UTRAN Cell
UTRAN Cell
UTRAN Cell
UTRAN Cell
UTRAN Cell
UTRAN Cell
UTRAN Cell
UTRAN Cell
UTRAN Cell
UTRAN Cell
UTRAN Cell
CelSel
Sib3orSib4
N/A
CelSel
SInterSearch Sintersearch
CelSel
CelSel
SIntraSearch Sintrasearch
CelSel
CelSel
SLimitRat
CelSel
SpSf
CelSel
SpSfPre
CelSel
SSearchHCS SsearchHCS
CelSel
CelSel
SSearchRat
Ssearch, RAT
TS 25.331: "RRC Protocol Specification" TS 25.304: "UE Procedures in Idle Mode" TS 25.331: TS 25.304: "UE Procedures in Idle Mode" TS 25.304: "UE Procedures in Idle Mode" TS 25.331: TS 25.304: "UE Procedures in Idle Mode" TS 25.304: "UE Procedures in Idle Mode" TS 25.331: TS 25.331: "RRC Protocol Specification" TS 25.304: TS 25.304: "UE Procedures in Idle Mode" TS 25.304: "UE Procedures in Idle Mode" TS 25.331: TS 25.304: "UE Procedures in Idle Mode" TS 25.304: "UE Procedures in Idle Mode" TS 25.331:
This Broadcast in parameter either SIB3 indicates or SIB4 whether the cell InterThis Frequency parameter Measuremen indicates the t Trigger interThreshold frequency This Sintersearch parameter is Configuration a switch Tag which indicates IntraThis Frequency parameter Measuremen indicates the t Trigger intraThreshold frequency This Sintrasearch parameter is Configuration a switch Tag indicating whether High HCS This Priority Inter- parameter system Cell indicates the Measuremen inter-RAT t Threshold measuremen Speed This Dependent parameter Scaling indicates the Factor for scaling Treselection factor of cell Speed This Dependent parameter is Scaling a switch Factor for which Treselection indicates Measuremen This t Trigger parameter Threshold indicates the for HCS Cell triggering Reselection threshold for This SsearchHCS parameter is Configuration a switch Tag which indicates Inter-System This Measuremen parameter t Trigger indicates the Threshold inter-RAT for Cell measuremen
UTRAN Cell
UTRAN Cell
UTRAN Cell
UTRAN Cell
UTRAN Cell
UTRAN Cell
UTRAN Cell
UTRAN Cell
UTRAN Cell
UTRAN Cell
UTRAN Cell
CelSel
TBarred
Tbarred
CelSel
TCrMax
TCRmax
CelSel
TCrMaxHyst TCrmaxHyst
CelSel
TReselection Treselections
CelSel
CelSel
TReselection Treselections Pch , PCH Deferred measuremen DefSibSuptS t control wch UTRAN support IntraIntraRptQSib frequency 3 reporting quantity SIB3 EvtMeasEcN N/A o
CelSel
TS 25.331: "RRC Protocol Specification" TS 25.304: TS 25.331: "RRC Protocol Specification" TS 25.304: TS 25.331: "RRC Protocol Specification" TS 25.304: TS 25.331: "RRC Protocol Specification" TS 25.304: TS 25.331: "RRC Protocol Specification" TS 25.304: TS 25.331: "RRC Protocol Specification" TS 25.304: TS 25.331: "System Information Block type 3"
Tbarred
TCRmax
TCrMaxHyst
CelSel
CInter
CInter
EvtMeasRSC N/A P
CRat
EvtMeasEcN N/A o2
Cell Reselection Timer Value (Treselection s)(s) Cell Reselection Timer Value for UE in CELL_FACH Cell Reselection Timer Value for UE in CELL_PCH Switch of Deferred SIB11/11bis/ 12 Support IntraTS 25.331: frequency "System reporting Information quantity Block type 3" SIB3 when UE Interfrequency N/A Event Measuremen t UE Interfrequency N/A Event Measuremen t UE Event Report N/A Configuration Index for Own System
This parameter indicates the barred time of a barred This parameter indicates the period for evaluating This parameter indicates the additional time duration This parameter indicates the cell reselection This parameter indicates the cell reselection This parameter indicates the cell reselection This parameter indicates whether deferred This parameter indicates when SIB11/11bis/ This parameter indicates the UE event report UE event report configuration index for CPICH This parameter is the UE event report configuration
UTRAN Cell
UTRAN Cell
UTRAN Cell
UTRAN Cell
UTRAN Cell
UTRAN Cell
UTRAN Cell
UTRAN Cell
UTRAN Cell and Service Related UTRAN Cell and Service Related UTRAN Cell and Service Related
CRat
EvtMeasRSC N/A P2
N/A
CInter
PrdMeasEcN N/A o
N/A
CInter
PrdMeasRSC N/A P
N/A
CInter
TrfCategory
N/A
N/A
CInter
TrfCatInterMI N/A dx
N/A
CInter
EvtMeasEcN N/A o2
N/A
CInter
EvtMeasRSC N/A P2
N/A
CInter
EvtMeasEcN N/A o3
N/A
CInter
EvtMeasRSC N/A P3
N/A
CIntra
TrfCategory
N/A
N/A
CIntra
TrfCatIntraMI N/A dx
N/A
UE Event Report Configuration Index for Own System UE Periodic Measuremen t Configuration Index for UE Periodic Measuremen t Configuration Index for Service and Bearer Type Used for Differentiatin g Handover Interfrequency Measuremen t Configuration UE Interfrequency Event Measuremen t UE Interfrequency Event Measuremen t UE Interfrequency Event Measuremen t UE Interfrequency Event Measuremen t Service and Bearer Type Used for Differentiatin g Handover Intrafrequency Measuremen t Configuration
This parameter is the UE event report configuration This parameter indicates the UE period report interThis parameter indicates the period report configuration This parameter differentiate different sets of handover This parameter indicates the configuration index of the This parameter indicates the UE CPICH Ec/No event This parameter indicates the UE CPICH RSCP event This parameter indicates the UE CPICH Ec/No event This parameter indicates the UE CPICH RSCP event This parameter differentiate different sets of handover This parameter indicates the configuration index of the
UTRAN Cell and Service Related UTRAN Cell and Service Related UTRAN Cell and Service Related UTRAN Cell and Service Related UTRAN Cell and Service Related
UTRAN Cell
UTRAN Cell
UTRAN Cell
UTRAN Cell
UTRAN Cell and Service Related UTRAN Cell and Service Related
CRat
EvtMeasEcN N/A o
N/A
CRat
EvtMeasRSC N/A P
N/A
CRat
PrdMeasEcN N/A o
N/A
CRat
PrdMeasRSC N/A P
N/A
CRat
TrfCategory
N/A
N/A
CRat
TrfCatRatMId N/A x
N/A
UE Event Report Configuration Index for Own System UE Event Report Configuration Index for Own System Periodical Report Configuration Index for Own System Periodical Report Configuration Index for Own System Service and Bearer Type Used for Differentiatin g Handover Inter-RAT Measuremen t Configuration Index Cell Individual Offset(dB) DeltaQrxlevm in in SIB11(dB) DeltaQrxlevm in in SIB11 Configuration Tag DeltaQrxlevm in in SIB12(dB) DeltaQrxlevm in in SIB12 Configuration Tag
TS 25.331: "RRC Protocol Specification" TS 25.331: "RRC externalGsm DtQrxLvMnSi DeltaQrxlevm Protocol Cell b11 in Specification" TS 25.304: TS 25.304: externalGsm DtQrxLvMnSi "UE N/A Cell b11Pr Procedures in Idle Mode" TS 25.331: "RRC externalGsm DtQrxLvMnSi Qrxlevmin Protocol Cell b12 Specification" TS 25.304: TS 25.304: externalGsm DtQrxLvMnSi "UE N/A Cell b12Pr Procedures in Idle Mode" Cell externalGsm CellIndivOffs Individual Cell et Offset
This parameter is the UE event report configuration This parameter is the UE event report configuration This parameter is period report configuration index for This parameter is period report configuration index for This parameter differentiate different sets of handover This parameter indicates the configuration index of the An offset is allocated for each cell being monitored. This parameter is the Qrxlevmin increment in This parameter indicates whether DeltaQrxlevm This parameter is the Qrxlevmin increment in This parameter indicates whether DeltaQrxlevm
UTRAN Cell and Service Related UTRAN Cell and Service Related UTRAN Cell and Service Related UTRAN Cell and Service Related UTRAN Cell and Service Related UTRAN Cell and Service Related GSM Neighboring Cell GSM Neighboring Cell GSM Neighboring Cell GSM Neighboring Cell GSM Neighboring Cell
N/A
GSM Downlink Load Threshold GSM Downlink RT Load Threshold GSM Uplink Load Threshold GSM Uplink RT Load Threshold
N/A
N/A
N/A
TS 25.331: "RRC externalGsm HCS_PRIO; HcsPrio Protocol Cell HCS Prio Specification" TS 25.423: TS 25.331: "RRC externalGsm QrxLevMinSi Qrxlevmin Protocol Cell b11 Specification" TS 25.304: TS 25.331: "RRC externalGsm QrxLevMinSi Qrxlevmin Protocol Cell b12 Specification" TS 25.304: TS 25.304: externalUtran DtQrxLvMnSi DeltaQrxlevm "UE Cell b11 in Procedures in Idle Mode" TS 25.304: "UE Procedures in Idle Mode" TS 25.331: "RRC externalUtran DtQrxLvMnSi DeltaQrxlevm Protocol Cell b12 in Specification" TS 25.304: TS 25.304: externalUtran DtQrxLvMnSi "UE N/A Cell b12Pr Procedures in Idle Mode" externalUtran DtQrxLvMnSi N/A Cell b11Pr
HCS_PRIO
Qrxlevmin in SIB11(dBm)
Qrxlevmin in SIB12(dBm)
DeltaQrxlevm in in SIB11(dB) DeltaQrxlevm in in SIB11 Configuration Tag DeltaQrxlevm in in SIB12(dB) DeltaQrxlevm in in SIB12 Configuration Tag
This parameter indicates the downlink overload This parameter indicates the downlink overload This parameter indicates the uplink overload This parameter indicates the uplink overload This parameter indicates the HCS priority level (0-7) This parameter indicates the minimum required This parameter indicates the minimum required This parameter is the Qrxlevmin increment in This parameter indicates whether DeltaQrxlevm This parameter is the Qrxlevmin increment in This parameter indicates whether DeltaQrxlevm
GSM Neighboring Cell GSM Neighboring Cell GSM Neighboring Cell GSM Neighboring Cell GSM Neighboring Cell GSM Neighboring Cell GSM Neighboring Cell
TS 25.331: "RRC Protocol Specification" TS 25.423: TS 25.331: "RRC Protocol Specification" TS 25.304: TS 25.331: "RRC Protocol Specification" TS 25.304: TS 25.331: "RRC Protocol Specification" TS 25.304: TS 25.331: "RRC Protocol Specification" TS 25.304: N/A
HCS_PRIO
Qqualmin in SIB11(dB)
Qqualmin in SIB12(dB)
Qrxlevmin in SIB11(dBm)
Qrxlevmin in SIB12(dBm) UE State Indicator Used for GSM Neighboring Measuremen t Priority of Neighboring GSM Cell Penalty Time in SIB11
gsmRelation
GsmStateMo N/A de
gsmRelation MeasPrio
N/A
N/A
TS 25.331: "RRC PenaltyTime gsmRelation Penalty_time Protocol Sib11 Specification" TS 25.304: TS 25.331: "RRC PenaltyTime gsmRelation Penalty_time Protocol Sib12 Specification" TS 25.304: TS 25.331: "RRC gsmRelation QhcsSib11 Qhcs Protocol Specification" TS 25.304: TS 25.331: "RRC gsmRelation QhcsSib12 Qhcs Protocol Specification" TS 25.304:
Penalty Time in SIB12 Quality Threshold Level (Qhcs) of Neighbouring Quality Threshold Level (Qhcs) of Neighbouring
This parameter indicates the HCS priority level (0-7) This parameter indicates the minimum required This parameter indicates the minimum required This parameter indicates the minimum required This parameter indicates the minimum required This parameter indicates the status of the GSM This parameter indicates the measuremen t priority of This parameter indicates the effective time of the This parameter indicates the effective time of the When cell selection and reselection is set to CPICH In the layered cell structure, This parameter
GSM Neighboring Cell GSM Neighboring Cell GSM Neighboring Cell GSM Neighboring Cell GSM Neighboring Cell GSM Neighboring Cell
TS 25.331: "RRC Qoffset1SNSi gsmRelation Qoffset1s, n Protocol b11 Specification" TS 25.304: TS 25.331: "RRC Qoffset1SNSi gsmRelation Qoffset1s, n Protocol b12 Specification" TS 25.304: TS 25.331: "RRC TempOffset1 Temporary_o gsmRelation Protocol Sib11 ffset1 Specification" TS 25.304: TS 25.331: "RRC TempOffset1 Temporary_o gsmRelation Protocol Sib12 ffset1 Specification" TS 25.304: TS 25.331: "RRC gsmRelation UseOfHCS Use of HCS Protocol Specification" Sib11orSib11 gsmRelation N/A bis
Quality Offset 1 (Qoffset1s, n) Between Serving Cell Quality Offset 1 (Qoffset1s, n) Between Serving Cell Temporary_o ffset1 in SIB11 Temporary_o ffset1 in SIB12 Use of HCS in Cell Reselection
TS 25.331: Broadcast in "RRC either SIB11 Protocol or SIB11bis Specification" TS 25.331: "RRC Filter Protocol Coefficient Specification" TS 25.331: "RRC Hysteresis(d Protocol B) Specification" Interfrequency N/A Measuremen t Configuration N/A Function of Configuration Parameters
Inter
FilterCoeff
Filter coefficient
Inter
Inter
Inter
Inter
MeaEvtId[MA TS 25.331: InterInterX_INTER_M "RRC frequency frequency EAS_EVENT Protocol event identity Event Identity ] Specification"
This parameter indicates the quality offset of the This parameter indicates the quality offset of the This parameter indicates the temporary offset for This parameter indicates the temporary offset of the This parameter indicates whether the HCS is used This parameter indicates whether the cell will be This parameter indicates the filtering factor that This parameter indicates the hysteresis used when This parameter indicates the configuration index of the This parameter indicates the purpose and functions of This parameter indicates the event triggered by
GSM Neighboring Cell GSM Neighboring Cell GSM Neighboring Cell GSM Neighboring Cell GSM Neighboring Cell GSM Neighboring Cell UTRAN Cell and Service Related UTRAN Cell and Service Related UTRAN Cell and Service Related UTRAN Cell and Service Related UTRAN Cell and Service Related
Inter
MeasEvtNum N/A Measuremen t quantity for MeasQuantit frequency y quality estimate PrdRptAmou Amount of nt reporting
N/A
Inter
Inter
Inter
Inter
RptCrt
Inter
ThreshNoUs Threshold edFreq[MAX non used _INTER_ME frequency AS_EVENT] ThreshUsedF Threshold req[MAX_INT used ER_MEAS_E frequency VENT] TrigTime[MA X_INTER_M Time to EAS_EVENT trigger ] WNoUsed[M AX_INTER_ W non-used MEAS_EVEN frequency T] Wused[MAX W used _INTER_ME frequency AS_EVENT]
Inter
Inter
Inter
Inter
TS 25.331: "RRC Measuremen Protocol t Quantity Specification" Amount of TS 25.331: Reporting in "RRC Period Protocol Report Specification" Criteria Reporting TS 25.331: Interval in "RRC Period Protocol Report Specification" Criteria TS 25.331: "RRC Reporting Protocol Criteria Specification" Absolute TS 25.331: Threshold of "RRC the Quality Protocol of the NonSpecification" used Absolute TS 25.331: Threshold of "RRC the Quality Protocol of the Specification" Currently TS 25.331: "RRC Time To Protocol Trigger Specification" Weight of TS 25.331: the Non"RRC used Protocol Frequency Specification" for Weight of TS 25.331: the Currently "RRC Used Protocol Frequency Specification" for N/A Mobility Configuration Scene
CIntra
HoCelSelSce N/A ne
This parameter indicates how many events are This parameter indicates the measuremen t quantity for This parameter indicates the times of the periodical This parameter indicates the intervals of periodical This parameter indicates the report criteria of the This parameter indicates the absolute threshold This parameter indicates the absolute threshold This parameter indicates the time difference This parameter is used when judging the quality of the This parameter is used for quality judgment for The parameter indicates handover and cell
UTRAN Cell and Service Related UTRAN Cell and Service Related UTRAN Cell and Service Related UTRAN Cell and Service Related UTRAN Cell and Service Related UTRAN Cell and Service Related UTRAN Cell and Service Related UTRAN Cell and Service Related UTRAN Cell and Service Related UTRAN Cell and Service Related
UTRAN Cell
CInter
HoCelSelSce N/A ne
N/A
CRat
HoCelSelSce N/A ne
N/A
N/A
N/A
NodeB
TWaitNBRea N/A ch
N/A
NodeB
N/A
NodeB
TIpRelLinkPr N/A o
N/A
The Mobility parameter Configuration indicates Scene handover and cell The Mobility parameter Configuration indicates Scene handover and cell This Sixteen parameter QAM UL indicates Support whether the Indicator neighboring This Classified parameter Zone identifies Indicator of whether the DRNC cell local cell is Time Delay Specifies the of Deleting time delay of Cell When deleting cell NodeB is resource Unreachable( when Node This ATM Link parameter Broken indicates Protection timer length Time Length of delay This IP Link parameter Broken indicates Protection timer length Time Length of delay
UTRAN Cell
UTRAN Cell
NodeB
RNC
RNC
Related FG
Unit
Default Value
Related Parameter
Type
RAN OMCR: Transmission 20ms, 100ms, Overview/Ha 250ms; ndover RNC: 0..2 RAN Transmission 0..100ms Overview
ms
20ms
N/A
N/A
ms
5ms
N/A
N/A
N/A
N/A
N/A Bandindicator of externalGsm Celll, BCCHARFC NCC BCC Bandindicator of externalGsm Celll, BCCHARFC N/A
N/A
Adjacent Gsm cell Basic Parameter Adjacent Gsm cell Basic Parameter Adjacent Gsm cell Basic Parameter Adjacent Gsm cell Basic Parameter Adjacent Gsm cell Basic Parameter Handover Control Adjacent Gsm cell Basic Parameter
0: DCS 1800 Band Used; 1: PCS 1900 N/A Band Used; 2: Standard 0..7 N/A
Bandindicator : DCS 1800, Network BCCHARFC Planing&Opti N: (512..885) mization Bandindicator N/A Network Planing&Opti mization
0-1023
N/A
Bandindicator : DCS 1800, Network BCCHARFC Planing&Opti N: (512..885) mization Bandindicator N/A Network Planing&Opti mization Network Planing&Opti mization Network Planing&Opti mization Network Planing&Opti mization
0-65535
N/A
0..65535
N/A
N/A
RAC
N/A
1..0xfffd, 0xffff
N/A
N/A
Adjacent Gsm cell Basic Parameter Adjacent Gsm cell Basic Parameter Adjacent Gsm cell Basic Parameter Adjacent Gsm cell Basic Parameter Adjacent Gsm cell Basic Parameter
dBm
30 dBm
N/A
N/A
Fixed
N/A
460
N/A
0..999
N/A
N/A
2..3
N/A
N/A
N/A
Fixed
0..7
N/A
BSIC BCC
N/A
Network Planing&Opti mization Network Planing&Opti mization Network Planing&Opti mization Network Planing&Opti mization Network Planing&Opti mization Network Planing&Opti mization Network Planing&Opti mization
N/A
N/A MCC of R8GsmCel, MNC of R8GsmCel, LAC of SNACNum of R8AdjCel, SNAC[4] of R8AdjCel
N/A
Adjacent Gsm cell Basic Parameter Adjacent Gsm cell Basic Parameter Adjacent Gsm cell Basic Parameter Inter_RNC Adjencent cell Basic Parameter Inter_RNC Adjencent cell Basic Parameter
0..255
N/A
N/A
0..65535
N/A
N/A
RAI contain MCC, MNC, LAC and RAC(RAI = MCC + MNC SNAC[4] is a list. the max element number of list is 4. the SNAC[4] is a SNACNum list. the max of R8AdjCel, element SNAC[4] of number of R8AdjCel list is 4. the N/A MCC of R8AdjCel, MNC of R8AdjCel, RncId of N/A
0.. 2^32-1
N/A
N/A
0..65535
N/A
N/A
N/A
Not Supported
N/A
N/A
Fixed
N/A
Support
N/A
N/A
Fixed-keep monitoring
HSPA Evolution Inter_RNC Adjencent cell Basic Parameter Inter_RNC Adjencent cell Basic Parameter Inter_RNC Adjencent cell Basic Parameter Inter_RNC Adjencent cell Basic Parameter Inter_RNC Adjencent cell Basic Parameter Inter_RNC Adjencent cell Basic Parameter Inter_RNC Adjencent cell Basic Parameter HSPA Evolution
N/A
Support
N/A
N/A
Fixed-keep monitoring
Combined
N/A
N/A
Fixed
N/A
May
N/A
N/A
Fixed
0: Not Supported N/A 1: Supported Band I: 10562..10838 N/A Band II: 9662..9938, 412, 437, 0: IR Combining N/A Capable 1: Combining (SF8[0], SF4[1], N/A 2SF4[2], 2SF2[3], 2SF2 and 0: Not Supported N/A 1: Supported 0: Supported 1: Not N/A Supported
Not Supported
N/A
N/A
N/A
N/A
Fixed
N/A
N/A
Fixed
Supported
N/A
N/A
1: Not Supported
This FDpchSuptIn parameter d of External can be set to Fixed UTRAN Cell 'supported' only when
Inter_RNC Adjencent cell Basic Parameter Inter_RNC Adjencent cell Basic Parameter Inter_RNC Adjencent cell Basic Parameter Handover Control / Load Balance /Admission Handover Control
1: Not Supported
N/A
N/A
Fixed
0: Not Supported N/A 1: Supported 0: Band I 1: Band II 2: Band III 4: Band V 5: Band VI 0: Not Support HSUPA and HSDPA 1: Support 1..0xfffd, 0xffff (5, 10, 20, 40, 64, 80, 128, 160) subframes OMCR: (50..33)dBm RNC: D=P+50 0..83
Not Supported
N/A
N/A
Network Planing&Opti mization Network Planing&Opti mization Network Planing&Opti mization Network Planing&Opti mization
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
160 subframes
N/A
N/A
Fixed-keep monitoring
dBm
24dBm
N/A
N/A
Fixed
N/A
460
N/A
N/A
N/A
460
N/A
N/A
0: Not parameter Supported N/A for future use 1: Supported 0: Not Supported N/A 1: Supported
0: Not Supported
N/A
N/A
Don't Care
Handover Control
0: Not Supported
N/A
N/A
Fixed
RAN Sharing 0..999 OMCR: (10..50)dBm step 0.1dBm; RNC: 0: False; 1: True
N/A
N/A
dBm
33.0dBm
N/A
N/A
FALSE
N/A
N/A
Fixed
N/A
N/A
N/A
Network Planing&Opti mization Network Planing&Opti mization Network Planing&Opti mization Network Planing&Opti mization
Inter_RNC Adjencent cell Basic Parameter Inter_RNC Adjencent cell Basic Parameter Inter_RNC Adjencent cell Basic Parameter
0..511
N/A
N/A
N/A
0..255
N/A
N/A
0..4095
N/A
N/A
N/A
N/A
N/A
Don't Care
0: False Parameter 1: True for future use Inter_RNC Adjencent cell Basic Parameter Handover Control
N/A
FALSE
N/A
Don't Care
0..65535
N/A
N/A
0..65535
N/A
N/A
SNAC[4] is a SNACNum list. the max Network of R8AdjCel, Planing&Opti element SNAC[4] of mization number of R8AdjCel list is 4. the
Inter_RNC Adjencent cell Basic Parameter Inter_RNC Adjencent cell Basic Parameter hsupa packet scheduling
0.. MAX_NUM_ SNAC_PER_ N/A GSMCEL, 0: Supported 1: Not N/A Supported Bit0: Not Support/Supp N/A ort HSDSCH Congestion
SNAC[4] is a SNACNum list. the max Network of R8AdjCel, Planing&Opti element SNAC[4] of mization number of R8AdjCel list is 4. the N/A N/A Fixed
Not Supported
0 Bit0: Not Support HS- N/A DSCH Congestion Not Supported N/A
N/A
Fixed-keep monitoring
0: Not Parameter Supported; N/A for future use 1: Supported Inter_RNC Adjencent cell Basic Parameter Inter_RNC Adjencent cell Basic Parameter Inter_RNC Adjencent cell Basic Parameter Inter_RNC Adjencent cell Basic Parameter 0: Inactive 1: Active
N/A
Don't Care
N/A
Inactive
N/A
N/A URA[4] is a list. the max element number of list is 4. the URA[4] is a list. the max element number of list is 4. the
Fixed
0..65535
N/A
N/A
Network Planing&Opti mization Network Planing&Opti mization Network Planing&Opti mization Network Planing&Opti mization Network Planing&Opti mization Network Planing&Opti mization
1.. MAX_URA, N/A MAX_URA=4 Band I: 9612..9888 Band II: 9262..9538, 12, 37, 62,
N/A
Basic Identification 0..65534 Parameter Handover Control /Load Balance Adjacent Gsm cell Basic Parameter
N/A
N/A
N/A
Neighbor
N/A
N/A
N/A
N/A
N/A
100ms
N/A
N/A
Fixed
0: May Node B 1: Must Management 2: Must not Basic Identification 0..65535 Parameter 0: General Basic NodeB Identification 1: Pico Node Parameter B 2: Home Bit0: Not hsupa Support/Supp packet ort HSscheduling DSCH Congestion RAN OMCR: Transmission 20ms, Overview 100ms, /Handover 250ms; Control RNC: 0..2 RAN Transmission 0..100ms Overview /HSUPA Packet 0: Not HSPA Support Evolution 1: Support 0: Not Sharing 1: RNC Control
N/A
May
N/A
N/A
Fixed
N/A
N/A
N/A
N/A
0: General NodeB
N/A
N/A
Fixed
N/A
N/A
Fixed-keep monitoring
ms
N/A
ms
5ms
N/A
N/A
N/A
0: Not Supported
N/A
N/A
Code Resource Allocation Code Resource Allocation Inter_RNC Adjencent cell Basic Parameter
N/A
0: Not Sharing
N/A
N/A
Fixed
20s
Valid only when HsSharMetho Fixed-keep HsSharMetho d monitoring d is set to "RNC N/A N/A Network Planing&Opti mization
N/A
0: Not Support
N/A
N/A
N/A
Don't Care
N/A
N/A
N/A
Don't Care
N/A
N/A
N/A
Don't Care
N/A
N/A
N/A
Don't Care
N/A
N/A
N/A
Don't Care
N/A
N/A
N/A
Don't Care
N/A
N/A
N/A
Don't Care
N/A
N/A
N/A
Don't Care
N/A
N/A
N/A
Don't Care
N/A
N/A
N/A
Don't Care
N/A
N/A
N/A
Don't Care
N/A
N/A
N/A
Don't Care
N/A
N/A
N/A
Don't Care
N/A
N/A
N/A
Don't Care
N/A
N/A
N/A
Don't Care
N/A
N/A
N/A
Don't Care
N/A
N/A
N/A
Don't Care
N/A
N/A
N/A
Don't Care
N/A
N/A
N/A
Don't Care
N/A
N/A
N/A
Don't Care
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
0-255
N/A
N/A
N/A IntraMeasCfg No of Intra, IntraMeasCfg Note of Intra, TrfCategory IntraMeasCfg No of Intra, IntraMeasCfg Note of Intra, TrfCategory IntraMeasCfg No of Intra, IntraMeasCfg Note of Intra, TrfCategory IntraMeasCfg No of Intra, IntraMeasCfg Note of Intra, TrfCategory IntraMeasCfg No of Intra, IntraMeasCfg Note of Intra, TrfCategory IntraMeasCfg No of Intra, IntraMeasCfg Note of Intra, TrfCategory RptCrt of Intra, MeaEvtId of Intra
N/A
Network Planing&Opti mization Network Planing&Opti mization Network Planing&Opti mization Network Planing&Opti mization Network Planing&Opti mization
0..65535
N/A
CIntraDefault
N/A
Handover Control
0..65535
N/A
CIntraDefault
N/A
Handover Control
0..65535
N/A
CIntraDefault
N/A
Handover Control
0..65535
N/A
CIntraDefault
N/A
Handover Control
0..65535
N/A
CIntraDefault
N/A
Fixed
Handover Control
0..65535
N/A
CIntraDefault
N/A
Fixed
Handover Control
Handover Control
Handover Control
(1[0], 2[1], 4[2], 8[3], 16[4], 32[5], N/A 64[6], Infinity[7]) (0[0], 250[1], 500[2], ms 1000[3], 2000[4], 4000[5], (0[0], 1[1], 2[2], 3[3], N/A 4[4], 5[5], 6[6], 7[7], 8[8], 9[9], (0..7.5)dB step 0.5dB N/A
Intra_Default
When RptCrt is 1 (Event Fixed Reporting Criteria) and MeaEvtId is When RptCrt is 1 (Event Fixed-keep Reporting monitoring Criteria) and MeaEvtId is N/A Fixed
Intra_Default N/A
Handover Control
Intra_Default
RptCrt of Intra
Handover Control
0..65535
N/A
Handover Control
Handover Control
Handover Control
Handover Control
Handover Control
Handover Control
0: Period Report Parameters for CPICH 1a[0], 1b[1], 1c[2], 1d[3], 1e[4], 1f[5], 1j[6] 1..MAX_INT RA_MEAS_E VENT Where MAX_INTRA 0: CPICH Ec/No 1: CPICH RSCP 2: Pathloss (1[0], 2[1], 4[2], 8[3], 16[4], 32[5], 64[6], Infinity[7]) (250[1], 500[2], 1000[3], 2000[4], 3000[5],
N/A
N/A
IntraMeasCfg No of Intra: Intra_Default IntraMeasCfg Note of Intra IntraMeasCfg IntraMeasCfg No of Intra, Intra_Default MeasQuantit y of Intra, RptCrt of RptCrt of Intra, Intra_Default MeasEvtNum of Intra, RptRange[]
N/A
N/A
N/A
For each value of IntraMeasCfg Note , there must be at According to IntraMeasCfg Note, the values of MeasQuantit MeaEvtId[] is an array. The maximum amount of Only valid when event RptCrt of Intra_Default reporting Intra criteria is used for the According to IntraMeasCfg IntraMeasCfg Note of Intra, Intra_Default Note, the RptCrt of values of Intra MeasQuantit RptCrt of Only valid for Intra, periodical Intra_Default PrdRptInterv measuremen al of Intra t. RptCrt of Intra, Intra_Default PrdRptAmou nt of Intra Only valid for periodical measuremen t. When RptCrt RptCrt of is 1(Event Intra, Intra_Default Reporting MeaEvtId of Criteria)and Intra MeaEvtId is According to IntraMeasCfg IntraMeasCfg Note of Intra, Intra_Default Note, the MeasQuantit values of y of Intra MeasQuantit When RptCrt RptCrt of is 1(Event Intra, Intra_Default Reporting MeaEvtId of Criteria)and Intra MeaEvtId is When RptCrt RptCrt of is 1(Event Intra, Intra_Default Reporting MeaEvtId of Criteria)and Intra MeaEvtId is
Network Planing&Opti mization Network Planing&Opti mization Network Planing&Opti mization Network Planing&Opti mization Network Planing&Opti mization
Fixed
ms
Fixed
Handover Control
(0, 1, 2, 3, 4, N/A 5, 6, 7) 1: Event Reporting N/A Criteria 2: Periodical Reporting (0, 1, 2, 3, 4, N/A 5, 6, 7)
Fixed
Handover Control
Fixed
Handover Control
Fixed
Handover Control
dB
Handover Control
Handover Control
CPICH RSCP: (115..-25) dBm CPICH (0[0], 10[1], 20[2], 40[3], 60[4], 80[5], 100[6], 120[7], (0.0..2.0) step 0.1
N/A
ms
Handover Control
N/A
HSPA Evolution
0...65535
N/A
When RptCrt is 1(Event Reporting Criteria)and MeaEvtId is When RptCrt is 1(Event RptCrt of Intra_Default Reporting Intra Criteria), TrigTime is When RptCrt RptCrt of is 1(Event Intra, Intra_Default Reporting MeaEvtId of Criteria)and Intra MeaEvtId is if the value of IURDCHSDS N/A IURDCHSDS SUPTIND SUPTIND is "False", this RptCrt of Intra, Intra_Default MeaEvtId of Intra 0: Not Supported N/A N/A
Fixed
Fixed
HSPA Evolution
Fixed
N/A
N/A
RAN Sharing (0...100)%, /Admission % step by 0.1% Control RAN Sharing INTEGER /Admission (0..999) Control RAN Sharing Enum (0, 2, /Admission 3, 4) Control Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior
N/A
N/A
N/A
N/A
N/A
if PLMNNUM= PLMNNUM 0, this of NodeB parameter is invalid if PLMNNUM= PLMNNUM 0, this of NodeB parameter is invalid if PLMNNUM= PLMNNUM 0, this of NodeB parameter is invalid MCC4RANS if the value haring of this MNC4RANS parameter is haring 0, the MinCEPerce following
Fixed
Fixed
Fixed
Fixed
dB
Fixed
0: False 1: True
N/A
Fixed
Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior HSPA Evolution Dynamic Radio Bearer Control /Handover Dynamic Radio Bearer Control /Handover Dynamic Radio Bearer Control /Handover Dynamic Radio Bearer Control /Handover Dynamic Radio Bearer Control /Handover Dynamic Radio Bearer Control /Handover Dynamic Radio Bearer Control /Handover Power Control
(2..16)step 2dB
dB
Fixed
0: False 1: True
N/A
Fixed
N/A
N/A
N/A
Fixed
N/A
On
N/A
N/A
Fixed-keep monitoring
0..384 kbps
kbps
384 kbps
MaxBitRate of SubSrv, Direction of SubSrv MaxBitRate of SubSrv, Direction of SubSrv MaxBitRate of SubSrv, Direction of SubSrv MaxBitRate of SubSrv, Direction of SubSrv MaxBitRate of SubSrv, Direction of SubSrv MaxBitRate of SubSrv, Direction of SubSrv
N/A
Fixed-keep monitoring
0..65535 kbps
kbps
5760kbps
N/A
Fixed-keep monitoring
0..384 kbps
kbps
384 kbps
N/A
Fixed-keep monitoring
0..384 kbps
kbps
384 kbps
N/A
Fixed-keep monitoring
0..65535 kbps
kbps
5760kbps
N/A
Fixed-keep monitoring
0..384 kbps
kbps
384 kbps
N/A
Fixed-keep monitoring
0: None 1: Common
N/A
Common
N/A
N/A
Fixed
0: Not Supported
N/A
N/A
Fixed
(0..215-1)m
meter
N/A
N/A
Fixed
Location Service
(0...990)m
meter
N/A
N/A
Fixed
Location Service
0: Height 1: Depth
N/A
N/A
N/A
Fixed
Location Service
(0..215-1)m
meter
N/A
N/A
Fixed
Location Service
0: Height 1: Depth OMCR: (0.. 90)step 1" RNC: 0..2^23-1 When the 0: North 1: South
N/A
N/A
N/A
Fixed
Location Service
Degree
N/A
N/A
Fixed
Location Service
N/A
N/A
N/A
Fixed
Location Service
Location Service
OMCR: (180.. 180)step 1" Degree RNC: 0..2^24-1 0: Omni Antenna N/A 1: Beam Antenna 0: Center Point with Altitude and Cell Radius 1: Polygon
N/A
N/A
Fixed
Only when AnteType, AnteType is OffsetAngle, 1(Beam Fixed InnerAngle Antenna), OffsetAngle/I N/A N/A Fixed
Location Service
N/A
Location Service
(0..1806627) meter m 0: Ellipsoid Point 1: Ellipsoid Point with Uncertainty (0..100)% OMCR: (0..360) RNC: (0..360) OMCR: (0.. 90) step 1" RNC: 0.. 2^23-1 When the 0: North 1: South OMCR: (180.. 180) step 1" RNC: 0..2^24-1 OMCR: (0..360) RNC: (0..360)
N/A
N/A
Fixed
Location Service
N/A
when CellDescripT CellDescripT ype, Fixed ype set 0, GARptType GARptType can be set 0, N/A N/A Fixed
Location Service
N/A
Location Service
Degree
Only when AnteType, AnteType is OffsetAngle, 1(Beam Fixed InnerAngle Antenna), OffsetAngle/I N/A N/A Fixed
Location Service
Degree
Location Service
N/A
N/A
N/A
Fixed
Location Service
Degree
N/A
N/A
Fixed
Location Service
Degree
3.. MAX_POINT Parameter N/A _NUM for future use And, MAX_POINT OMCR: (0.. 90) step 1"; Location Degree RNC: Service 0..2^23-1 When the Location Service 0: North; 1: South N/A
Only when AnteType, AnteType is OffsetAngle, 1(Beam InnerAngle Antenna), OffsetAngle/I PolygonPoint 1)PolyLatitud Num, eSign[15], PolyLatitudeS PolyLatitude[ ign[15], 15], PolyLatitude[ PolyLongitud PolygonPoint Num of UtranCell/ext N/A ernalUtranCe ll, PolygonPoint 1)PolyLatitud Num, eSign[15], PolyLatitudeS PolyLatitude[ ign[15], 15], PolyLatitude[ PolyLongitud
Fixed
Don't Care
Fixed
Fixed
Location Service
Degree
1)PolyLatitud eSign[15], PolyLatitude[ Fixed 15], PolyLongitud N/A Network Planing&Opti mization
Handover Control Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior
N/A
The first instance of N/A the parameter corresponds 1: Barred N/A 2: Not Barred
65535
N/A
N/A
Fixed
N/A
Fixed
N/A
N/A
Fixed
Basic Identification 0..65534 Parameter Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior
N/A
N/A
N/A
(-4..-2)dB Step2dB
dB
-2dB
N/A
0: False 1: True
N/A
FALSE
QRxLevMin of CelSel
N/A
0: False 1: True
N/A
N/A
Fixed
0: Allowed
N/A
N/A
Fixed
N/A
Fixed
Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior
0: False 1: True
N/A
N/A
Fixed
N/A
Fixed
0: False 1: True
N/A
N/A
Fixed
1..16
HcsSrvCelInf oPre of CelSel_Defa N/A CelSel, ult TcrMax of CelSel CelSel_Defa NoHcsTcrMa N/A ult x of CelSel
Fixed
1..16
N/A
Fixed
(Not Used, 30, 60, 120, 180, 240)S (Not Used, 10, 20, 30, 40, 50, 60, 70)s 0: Reserved 1: Not Reserved
Fixed
Fixed
N/A
N/A
0 : False 1: True
N/A
N/A
Fixed
dB
-12dB
N/A
N/A
Fixed
-92dBm
N/A
N/A
Fixed
Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior
(0..40)dB step2 dB
dB
N/A
dB
N/A
Fixed
dB
N/A
Fixed
(0..40)dB step 2 dB
dB
CelSel_Defa QualMeas of N/A ult CelSel Sib3orSib4 CelSel_Defa of CelSel, N/A ult QualMeas of CelSel Sib3orSib4 CelSel_Defa of CelSel, N/A ult QualMeas of CelSel
dB
Fixed
dB
Fixed
dB
-18dB
N/A
N/A
(-115..25)dBm step dBm 2dBm 1: CPICH Ec/No 2: CPICH RSCP (1..91)dB step 2dB
-115dBm
N/A
N/A
N/A
N/A
dB
OtherRATInf CelSel_Defa oPre of N/A ult CelSel OtherRATInf CelSel_Defa oPre of N/A ult CelSel
Fixed
0: False 1: True
N/A
Fixed
Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior
0: SIB3 1: SIB4
N/A
N/A
Fixed
dB
Network Planing&Opti mization Network Planing&Opti mization Network Planing&Opti mization Network Planing&Opti mization
0: False 1: True
N/A
N/A
dB
0: False 1: True
N/A
N/A
dB
Fixed
N/A
N/A
Fixed
0: False 1: True
N/A
N/A
Fixed
(1..91)dB step2dB
dB
Fixed
0: False 1: True
N/A
N/A
Fixed
dB
Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior
(10, 20, 40, 80, 160, 320, s 640, 1280)s (Not Used, 30, 60, 120, 180, 240)s (Not Used, 10, 20, 30, 40, 50, 60, 70)s
N/A
Fixed
HcsSrvCelInf CelSel_Defa oPre of N/A ult CelSel HcsSrvCelInf oPre of CelSel_Defa N/A CelSel, ult TcrMax of CelSel CelSel_Defa N/A ult N/A
Fixed
Fixed
(0..31)s step s 1s
Fixed
N/A
Fixed
(0..31)s step s 1s
N/A
Fixed
N/A
Off
N/A
N/A
Fixed-keep monitoring
N/A
N/A
Fixed-keep monitoring
Handover Control
0..65535
N/A
Handover Control
0..65535
N/A
InterMeasCfg No of Inter, CInterDefault InterMeasCfg N/A Note of Inter, TrfCategory InterMeasCfg No of Inter, CInterDefault InterMeasCfg N/A Note of Inter, TrfCategory CRATDefault N/A N/A
Handover Control
0..65535
N/A
Handover Control
0..65535
N/A
CRATDefault N/A
N/A
Handover Control
0..65535
N/A
Handover Control
N/A
Handover Control
N/A
InterMeasCfg No of Inter, CInterDefault InterMeasCfg N/A Note of Inter, TrfCategory InterMeasCfg No of Inter, CInterDefault InterMeasCfg N/A Note of Inter, TrfCategory PrdMeasEcN o of Inter, CInterDefault PrdMeasRSC N/A P of Inter, EvtMeasEcN CInterDefault N/A InterMeasCfg No of Inter, InterMeasCfg Note of Inter, TrfCategory InterMeasCfg No of Inter, InterMeasCfg Note of Inter, TrfCategory InterMeasCfg No of Inter, InterMeasCfg Note of Inter, TrfCategory InterMeasCfg No of Inter, InterMeasCfg Note of Inter, TrfCategory N/A
Fixed
Fixed
Network Planing&Opti mization Network Planing&Opti mization Network Planing&Opti mization Network Planing&Opti mization Network Planing&Opti mization Network Planing&Opti mization Network Planing&Opti mization Network Planing&Opti mization
Handover Control
N/A
handover control
0..65535
N/A
CInterDefault
N/A
handover control
0..65535
N/A
CInterDefault
N/A
handover control
0..65535
N/A
CInterDefault
N/A
handover control
N/A
CInterDefault
N/A
Handover Control
N/A
CIntraDefault N/A
N/A
Handover Control
N/A
CIntraDefault N/A
N/A
Handover Control
0..65535
N/A
CRATDefault
Handover Control
0..65535
N/A
CRATDefault
Handover Control
0..65535
N/A
CRATDefault
Handover Control
N/A
CRATDefault
InterRatCfgN o of Rat, InterRatCfgN ote of Rat, TrfCategory InterRatCfgN o of Rat, InterRatCfgN ote of Rat, TrfCategory InterRatCfgN o of Rat, InterRatCfgN ote of Rat, TrfCategory InterRatCfgN o of Rat, InterRatCfgN ote of Rat, TrfCategory
N/A
N/A
N/A
Fixed
N/A
Fixed
Handover Control
N/A
CRATDefault N/A
N/A
Network Planing&Opti mization Network Planing&Opti mization Network Planing&Opti mization Network Planing&Opti mization Network Planing&Opti mization
Handover Control
N/A
CRATDefault N/A
N/A
Handover Control Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior
OMCR: (10..10)dB dB step 0.5 RNC: D=(P+10)*2, OMCR: (-4..2)dBm dB Step2dBm RNC: D=(P+4)/2 0: False 1: True N/A
0dB
N/A
N/A
-2dB
FALSE
-2dB
FALSE
Only valid DtQrxLvMnSi when b11Pr of DtQrxLvMnSi externalGsm b11Pr is Cell 'True'. When DtQrxLvMnSi QrxLevMinSi b11 of b11 is less externalGsm than Cell 115dBm, DtQrxLvMnSi b12Pr of N/A externalGsm Cell When DtQrxLvMnSi QrxLevMinSi b12 of b12 is less externalGsm than Cell 115dBm,
Fixed
Fixed
Handover Control
N/A
0.85
N/A
N/A
Fixed
Handover Control
N/A
0.75
N/A
N/A
Fixed
Handover Control
N/A
0.85
N/A
N/A
Fixed
Handover Control Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior
N/A
0.75
N/A
N/A
Fixed
0..7
N/A
N/A
N/A
Fixed
OMCR: (115..-25)dB dBm step 2 dB RNC: D=(P+115)/2 OMCR: (115..25)dBm step dBm 2 dBm RNC: OMCR: (-4..2)dBm dB Step2dBm RNC: D=(P+4)/2 0: False 1: True N/A
-115dBm
N/A
N/A
-115dBm
N/A QrxLevMinSi b11Pr of externalUtran Cell QrxLevMinSi b11 of externalUtran Cell QrxLevMinSi b12Pr of externalUtran Cell QrxLevMinSi b12 of externalUtran Cell
N/A Only valid when DtQrxLvMnSi b11Pr is 'True', and When QrxLevMinSi b11 is less than 115dBm, Only valid when DtQrxLvMnSi b12Pr is 'True'. When QrxLevMinSi b12 is less than 115dBm,
Fixed
-2dB
FALSE
-2dB
Fixed
FALSE
Fixed
Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Handover Control Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior
0..7
N/A
N/A
N/A
Fixed
OMCR: (24..0)dB
dB
-18dB
N/A
N/A
OMCR: (24..0)dB
dB
-18dB
N/A
N/A
Fixed
OMCR: (115..25)dBmstep dBm 2 dBm RNC: OMCR: (115..25)dBm step dBm 2 dBm RNC: 0: Idle State Only 1: Cell_DCH N/A State Only 2: 0..2 OMCR: (Not Used[0], 10[1], 20[2], 30[3], 40[4], 50[5], 60[6] )s OMCR: (Not Used[0], 10[1], 20[2], 30[3], 40[4], 50[5], 60[6] )s OMCR: (110..-37)dBm RNC: D=P+110, 0..73 (OMCR: 110..-37)dBm RNC: D=P+110 0..73 N/A
-115dBm
N/A
N/A
N/A
N/A
Fixed
N/A
N/A
N/A
N/A
N/A
Not Used
UseOfHCS Only valid of when gsmRelation UseOfHCS is 'Used'. UseOfHCS Only valid of when gsmRelation UseOfHCS is 'Used'. UseOfHCS Only valid of when gsmRelation UseOfHCS is 'Used'. UseOfHCS Only valid of when gsmRelation UseOfHCS is 'Used'.
Fixed
Not Used
Fixed
dBm
-90dBm
Fixed
dBm
-90dBm
Fixed
Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Idle Mode and Common Channel Behavior Handover Control
OMCR: (50..50)dB
dB
0dB
N/A
N/A
OMCR: (50..50)dB OMCR: (3[0], 6[1], 9[2], 12[3], 15[4], 18[5], 21[6], OMCR: (3[0], 6[1], 9[2], 12[3], 15[4], 18[5], 21[6], 1: Not Used 2: Used
dB
0dB
N/A
N/A
Fixed
dB
3dB
dB
3dB
If PenaltyTime PenaltyTime Sib11 of Sib11 is 'Not Fixed gsmRelation used', it is no need to If PenaltyTime PenaltyTime Sib12 of Sib12 is 'Not Fixed gsmRelation used', it is no need to N/A N/A Fixed
N/A
Not Used
0: SIB11 1: SIB11bis
N/A
SIB11
If GsmStateMo GsmStateMo Network de of Planing&Opti de is "1", gsmRelation GSMSIB11O mization RSIB11BIS N/A Fixed
(0, 1, 2, 3, 4, 5, 6, 7, 8, 9, N/A 11, 13, 15, 17, 19) (0, 0.5..14.5)dB step 0.5dB
Inter_Default N/A
Handover Control
dB
MeasEvtNum Inter, RptCrt Inter_Default of Inter, N/A ThreshUsedF req[] of Inter, Inter_Default InterMeasCfg N/A Note of Inter
Handover Control
0..65535
N/A
Handover Control
0: UE Period Report Parameters N/A for CPICH Ec/No 2a, 2b, 2c, 2d, 2e, 2f N/A
Handover Control
InterMeasCfg No of Inter, Inter_Default MeasQuantit N/A y of Inter, RptCrt of RptCrt of Inter, Inter_Default N/A MeasEvtNum of Inter
Fixed
Handover Control
Handover Control
1..MAX_INT ER_MEAS_E N/A VENT Where MAX_INTER 0: CPICH Ec/No N/A 1: CPICH RSCP 1, 2, 4, 8, 16, 32, 64, N/A Infinity (250, 500, 1000, 2000, 3000, 4000, 6000, 8000, 12000, 2: Interfrequency Event Reporting Criteria CPICH RSCP: (115..-25 )dBm step 1dBm CPICH RSCP: (115..-25 )dBm step 1dBm (0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, (0.0..2.0 ) step 0.1
Inter_Default
RptCrt of Inter
N/A
Fixed
InterMeasCfg Note of Inter, Inter_Default N/A RptCrt of Inter RptCrt of Inter, Inter_Default N/A PrdRptInterv al of Inter RptCrt of Inter, Inter_Default N/A PrdRptAmou nt of Inter InterMeasCfg Note of Inter, RptCrt of Inter MeasEvtNum Inter, MeaEvtIdof Inter, RptCrt of Inter, MeasEvtNum Inter, MeaEvtIdof Inter, RptCrt of Inter, MeasEvtNum Inter, RptCrt of Inter, ThreshUsedF req[] of Inter, MeasEvtNum Inter, MeaEvtIdof Inter, RptCrt of Inter, MeasEvtNum Inter, MeaEvtIdof Inter, RptCrt of Inter, N/A
Handover Control
Fixed
Handover Control
ms
Fixed
Handover Control
N/A
Inter_Default
N/A
Network Planing&Opti mization Network Planing&Opti mization Network Planing&Opti mization Network Planing&Opti mization
Handover Control
dBm
Inter_Default
N/A
Handover Control
dBm
Inter_Default
N/A
Handover Control
ms
Inter_Default
N/A
Handover Control
N/A
Inter_Default
N/A
Fixed
Handover Control
N/A
Inter_Default
N/A
Fixed
Handover Control
N/A
N/A
Fixed-keep monitoring
Handover Control
0: Outdoor Scene 1: HighMobility Outdoor 0: Outdoor Scene 1: HighMobility Outdoor 0: Not Support 1: Support 0: False 1: True
N/A
N/A
N/A
Fixed-keep monitoring
N/A
N/A
N/A
Fixed-keep monitoring
N/A
0: Not Support
N/A
N/A
Fixed-keep monitoring
N/A
0: False
N/A
N/A
Fixed
100ms
600
N/A
N/A
Fixed
100 ms
100
N/A
N/A
Fixed
100 ms
100
N/A
N/A
Fixed
Function Switch
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
Configuratio n Rule and Adjustment Suggestion The parameter is configuredac cording to the The protocol parameter TOAWS is configured according to Function of this parameter: Unique physical Function: neighboring GSM cells' BCCH ARFCN. Function: neighboring GSM cells' BSIC. Configuration Function: neighboring GSM cells' absolute radio Function: neighboring GSM cells' BSC Identifier Function: neighboring cell identity Configuration Rule: This Function: GERAN Cell Indicator Configuration Rule: This Function: LAC of the neighboring cell Configuration
Default Value Change Service or Configuratio take effect Node Impact n Reason according to the transport delay from a New Session N SRNC to a related according to the transport New Session N delay jitter from a RNC to a related N/A This parameter should be set according to This parameter should be set according to This parameter should be set according to This parameter should be set according to This parameter should be set according to This parameter should be set according to This parameter should be set according to
New connection
New connection
New connection
New connection
New connection
New connection
New connection
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
Function: maximum allowed uplink transmit Function: neighboring GSM cells' MCC. Configuration Function: neighboring GSM cells' MNC. Configuration Function: neighboring GSM cells' MNC BCD Length Function: neighboring GSM cells' NCC Configuration Function of this parameter: configure the PLMN of Function of this parameter: configure the RAC of GSM Function of this parameter: configure the SANC info of Function of this parameter: configure the SANC Function of this parameter: Unique physical Function of this parameter: configure cell-id of
UE capability is taken into account in default value. This parameter should be set according to This parameter should be set according to This parameter should be set according to This parameter should be set according to The default value is deicided by the factor that the N/A
New connection
New connection
New connection
New connection
New connection
New users
New users
New users
New users
N/A
New users
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
Function: This parameter indicates if the Function: This parameter indicates if the Function: This parameter indicates if the Function of this parameter: configure combine Function of this parameter: SRNC indicate the Function: This parameter indicates if the Function: downlink carrier central frequency Function: The parameter indicates the E-DCH Function: The parameter indicates the E-DCH SF Function: The parameter indicates whether EIt shoulde be set to "Supported" if the external
Default value is set to "Not Support", which should be adjusted Default value is set to "Support", which should be adjusted Default value is set to "Support", which should be adjusted The default value is to save transmission resource. The default value is to ensure best compatiablity Default value is set to "Not Support", which should be adjusted This parameter should be set according to Default value is set to "IR and Chase Combining Capable", Default value is set to "2SF2 and 2SF4", which should be Default value is set to "Supported", which should be adjusted N/A
At next judgment (i.e., shall not affect ongoing At next judgment (i.e., shall not affect ongoing At next judgment (i.e., shall not affect ongoing Next Radio Link Add Request Over Iur Next Radio Link Add Request Over Iur At next judgment (i.e., shall not affect ongoing New connection At next judgment (i.e., shall not affect ongoing At next judgment (i.e., shall not affect ongoing At next judgment (i.e., shall not affect ongoing Take effect for the next call
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
It shoulde be set to "Supported" if the external The function of this parameter: This paratmeter Function: frequency band of the central frequency of Function: Neighboring cells' HSPA capability Configuration Function: Location area code Configuration Rule: This Function: The parameter indicates the Max UE Function: maximum transmit power Configuration Function: Mobile country code Configuration Rule: This Function: Mobile country code Configuration Rule: This It shoulde be set to "Supported" if the external It shoulde be set to "Supported" if the external
N/A the desault value is "0: closed" and should be set This parameter should be set according to In general, HSPA capability will be support. This parameter should be set according to Default value is set to "160 subframes", which should be adjusted UE capability is taken into account in default value. This parameter should be set according to This parameter should be set according to N/A
Immediately
New connection
New connection At next judgment (i.e., shall not affect ongoing New connection
New connection
New connection
Take effect for the next call Take effect for the next call
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
Yes
N/A
No
N/A
Function of this parameter: configure MNC of Parameter Function: This parameter indicates Parameter Function: This parameter indicates Function of this parameter: configure PLMN This parameter indicates the Primary Scrambling Function: Routing area code Configuration Rule: This Function: RNC ID of the neighboring cell This parameter is not used in current SW version. This parameter is not used in current SW version. Function: Service area code for CS and PS domain Function of this parameter: configure the SANC info of
N/A The default value is configured by network planning & The default value is configured by the network The default value is deicided by the factor that the N/A This parameter should be set according to This parameter should be set according to not used parameter
New users
Immediately
Immediately
New users Take effect after the the system information is updated New connection
New connection
N/A
N/A
New connection
New users
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
Function of this parameter: configure the SANC Function: STTD indicator Configuration Rule: This It is set to be "Support HSDSCH Congestion Detection" in This parameter is not used in current SW version Function: neighboring cells's transmit diversity Function of this parameter: configure the URA info of Function of this parameter: configure the URA number Function: occupied uplink carrier central frequency Function: neighboring GSM Cell Identifier Configuration Function: relation between UTRAN cell and GSM Function of this parameter: Unique physical
The default value is deicided by the factor that no This parameter should be set according to The feature of most RNCs and NodeBs is not stable, N/A This parameter should be set according to N/A The default value is decided by the mobilty of UE and This parameter should be set according to This parameter should be set according to This parameter should be set according to N/A
New users
At next use
New Session N
at next use
At next use
New users
New users
New connection
At next use
No
N/A
No
Yes
No
N/A
No
N/A
No
YES
No
N/A
No
N/A
No
YES
No
YES
No
N/A
No
N/A
Main function: This parameter indicates the Function: combination of soft handover indicator Main function: This parameter indicates the Configuration Rule: Generally, this parameter is It is set to be "Support HSDSCH Congestion Detection" in The parameter is configuredac cording to the The protocol parameter TOAWS is configured according to Function of this parameter: it indicates whether Function: This parameter indicates the control Function: This parameter indicates the period to Function: The parameter indicates whether the
The default value is considering Immediately all factors: the timer Combination of soft New handover is connection considered to define this None The parameter should be set to "General The feature of most RNCs and NodeBs is not stable, according to the transport delay from a RNC to a related according to the transport delay jitter from a RNC to a related N/A Usually, it should be set to "Not sharing" unless the N/A
Immediately
New Session N
Immediately
Immediately
N/A
Take effect after the N change is loaded to the RNC Take effect after the N change is loaded to the RNC Take effect after the N change is loaded to the RNC
No
N/A
reserved parameter
Reserved parameter, Immediately default value equal 0 Reserved parameter, Immediately default value equal 0 Reserved parameter, Immediately default value equal 0 Reserved parameter, Immediately default value equal 0 Reserved parameter, Immediately default value equal 0 Reserved parameter, Immediately default value equal 0 Reserved parameter, Immediately default value equal 0 Reserved parameter, Immediately default value equal 0 Reserved parameter, Immediately default value equal 0 Reserved parameter, Immediately default value equal 0 Reserved parameter, Immediately default value equal 0
No
N/A
reserved parameter
No
N/A
reserved parameter
No
N/A
reserved parameter
No
N/A
reserved parameter
No
N/A
reserved parameter
No
N/A
reserved parameter
No
N/A
reserved parameter
No
N/A
reserved parameter
No
N/A
reserved parameter
No
N/A
reserved parameter
No
N/A
reserved parameter
Reserved parameter, Immediately default value equal 0 Reserved parameter, Immediately default value equal 0 Reserved parameter, Immediately default value equal 0 Reserved parameter, Immediately default value equal 0 Reserved parameter, Immediately default value equal 0 Reserved parameter, Immediately default value equal 0 Reserved parameter, Immediately default value equal 0 Reserved parameter, Immediately default value equal 0 Reserved parameter, Immediately default value equal 0
No
N/A
reserved parameter
No
N/A
reserved parameter
No
N/A
reserved parameter
No
N/A
reserved parameter
No
N/A
reserved parameter
No
N/A
reserved parameter
No
N/A
reserved parameter
No
N/A
reserved parameter Main function: This parameter indicates the Main function: This parameter indicates the
No
N/A
N/A The default value is 8s, considering all factors: cost time of
Can't Modify N
No
N/A
Immediately
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
The parameter wasn't be used by RNC. Function: UE detected set configuration index for Cpich Ec/No Function: UE detected set configuration index for Cpich RSCP Function: UE intrafrequency event report configuration Function: UE intrafrequency event report configuration Invalid, not support period measuremen t Invalid, not support period measuremen t Function: Report amount after event triggered in Function: Report interval after event triggered in Function: L3 filtering on the measuremen t results Function: used to delay event reporting, decrease
N/A This parameter should be set according to This parameter should be set according to This parameter should be set according to This parameter should be set according to This parameter should be set according to This parameter should be set according to HO success rate is considered to define this default value. HO success rate is considered to define this default value. The actual application is considered to define this default value. Normal mobility scenario and HO success rate are
N/A
When best cell is changed When best cell is changed When best cell is changed When best cell is changed When best cell is changed When best cell is changed When best cell is changed When best cell is changed When best cell is changed When best cell is changed
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
Function: index of intrafrequency measuremen t parameters Function: purpose and functions of intrafrequency Function: used to indicate measuremen t event Function: number of events required to be Function: measuremen t quantity of the intrafrequency Function: report amounts in periodical reporting Function: Report interval in periodical reporting Function: to control radio links replace Related factor: Function: report rules of the intrafrequency measuremen Function: control the maximum number of cells in Function: used for soft HO addition and deletion. Related
This parameter should be set according to HO scenario, measuremen t quantity and report 3GPP definition is considered to define this default value. Measuremen t purpose is considered to define this default value. Measuremen t accuracy is considered to define this default value. HO success rate is considered to define this default value. HO success rate is considered to define this default value. Proper macro gain and soft HO times are considered System capacity is considered to define this default value. Proper macro gain is considered to define this Proper soft HO ratio, soft HO success rate and system
Can't Modify N
When best cell is changed When best cell is changed When best cell is changed When best cell is changed When best cell is changed When best cell is changed When best cell is changed When best cell is changed When best cell is changed
No
N/A
No
N/A
No
N/A
No
N/A
No
Yes
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
Function: used to delay event reporting, decrease Function: used to delay event reporting, decrease Function: weight when eveluating cell's quality Related The function of this parameter: This paratmeter The function of this parameter: This parameter The function of this parameter: MCC for RAN CE The function of this parameter: Minimal percent of The function of this parameter: MNC for RAN CE The function of this parameter: This parameter Function: Qqualminoffset is used for restricting Function: This parameter indicates whether the
Average HO times and HO success rate are considered Normal mobility scenario and HO success rate are HO success rate is mainly considered to define this network planning parameter, no default value(second it's set according to the cell DC capability network planning parameter, no default value(MCC) network planning parameter, no default value(networ network planning parameter, no default value(MNC) network planning parameter, no default value(networ The parament is set to decrease the risk of reThis parameter will not be used.
When best cell is changed When best cell is changed When best cell is changed when interRNC handover happen
Immediately New CAC(Service Setup, handover or Service New CAC(Service Setup, handover or Service New CAC(Service Setup, handover or Service New CAC(Service Setup, handover or Service When system information is changed When system information is changed
No
N/A
No
N/A
No
Yes
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
Function: QrxlevminOff set is used for restricting PLMN pingFunction: This parameter indicates whether the Function: This parameter indicates whether the Function: Switch of CS 64kbps Establishmen t in external Function: Maximum Bit Rate on DL DCH for NRT PS Function: Maximum Bit Rate on EDCH for NRT PS Function: Maximum Bit Rate on UL DCH for NRT PS Function: Maximum Bit Rate on DL DCH for RT PS RAB in Function: Maximum Bit Rate on EDCH for RT PS RAB in Function: Maximum Bit Rate on UL DCH for RT PS RAB in Parameter Function: This parameter indicates the
The parament is set to decrease the risk of reThis parameter will not be used.
When system information is changed When system information is changed New connection or new radio link Effective with new service, without effect of Effective with new service, without effect of Effective with new service, without effect of Effective with new service, without effect of Effective with new service, without effect of Effective with new service, without effect of Effective with new service, without effect of
N/A
The reason that the default value of the parameter is The reason that the default value of the parameter is The reason that the default value of the parameter is The reason that the default value of the parameter is The reason that the default value of the parameter is The reason that the default value of the parameter is The reason that the default value of the parameter is The power balancing Immediately type "Common" can resolve
No
N/A
No
N/A
Immediately
At next positioning transaction At next positioning transaction At next positioning transaction At next positioning transaction At next positioning transaction At next positioning transaction At next positioning transaction At next positioning transaction At next positioning transaction At next positioning transaction
No
N/A
It is configured N/A according to cell condition. It is configured N/A according to cell condition. It is configured N/A according to cell condition. It is configured N/A according to cell condition. It is configured N/A according to cell condition. It is configured N/A according to cell condition. It is configured N/A according to cell condition. because It is most cell is configured set Omni according to Antenna, so cell condition. this Configure It is usually according configured anteType by 0. default Value.If
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
It is configured according to cell condition. It is related with the positioning function, and is used in It is configured according to cell condition.The It is related with the positioning function, and is used in It is configured according to cell condition.
N/A
At next positioning transaction At next positioning transaction At next positioning transaction At next positioning transaction At next positioning transaction At next positioning transaction At next positioning transaction At next positioning transaction
N/A
N/A
N/A
N/A
No
N/A
It is configured N/A according to cell condition. It is configured N/A according to cell condition. It is configured N/A according to cell condition. It is configured N/A according to cell condition. This parameter is N/A not used in current SW version It is configured N/A according to cell condition.
No
N/A
No
N/A
No
N/A
at next use
No
N/A
at next use
No
N/A
at next use
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
It is configured according to cell condition. Parameter function: network planning parameter. Function: This parameter is the access class barred Function: Cell Barred Indicator. Cell selection/res Function: This parameter is cell reservation Function: Cell Identity Configuration Rule: This parameter is Function: To extend the minimum value of QrxLevMin(th Function: The parameter value is "True" to Function: This parameter indicates whether Function: The parameter value is "IntraFunction: This parameter indicates the scaling
N/A
at next use
N/A If the parameter value is "Barred", users will not If the parameter value is "Barred", users will not This parameter is determined by the operator. This parameter should be set according to This parameter is set according to the cell This parameter is set according to the cell This parameter will not be used. To guarentee the continuity of cell selection. The parament is set according to the velocities
At next use
When system information is changed When system information is changed When system information is changed
When system information is changed When system information is changed When system information is changed When system information is changed When system information is changed
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
Function: Interfrequency Scaling Factor for Function: Inter-RAT Scaling Factor for Treselection. Function: Inter-RAT Scaling Factor for Treselection Function: This parameter indicates the maximum Function: This parameter indicates the maximum Function: Duration for Evaluating Allowed Amount of Function: This parameter indicates the additional Function: If operater expect that some cells are not Function: This parameter is a switch indicating Function: Quality Threshold Level for Applying Function: Quality Threshold Level for Applying
To guarentee the time of cell selection, The parament is set according to the velocities To guarentee the time of cell selection, The parament is set according to the velocities The parament is set according to the velocities The parament is set according to the velocities The parament is set according to the velocities If operator has no specil use , the cell should be campped on. The parament is set according to the The parament is set according to the change The parament is set according to the change
When system information is changed When system information is changed When system information is changed When system information is changed When system information is changed When system information is changed When system information is changed When system information is changed When system information is changed When system information is changed When system information is changed
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
Function: Reselection Hysteresis 1 of Serving Cell Function: Reselection Hysteresis 1 of Serving Cell for UE Function: Reselection Hysteresis 1 of Serving Cell for UE Function: Reselection Hysteresis 2 of Serving Cell Function: Reselection Hysteresis 2 of Serving Cell for UE Function: Reselection Hysteresis 2 of Serving Cell for UE Function: This parameter indicates the minimum Function: This parameter indicates the minimum Function: This parameter indicates the measuremen Function: This parameter indicates the inter-RAT Function: SHCS, RAT Configuration Tag. Configuration
The parament is set according to the velocities The parament is set according to the velocities The parament is set according to the velocities The parament is set according to the velocities The parament is set according to the velocities The parament is set according to the velocities This parameter is set according to the cell This parameter is set according to the cell The default value is set to guarentee the accuracy of The parament is set according to the This parameter will not be used.
When system information is changed When system information is changed When system information is changed When system information is changed When system information is changed When system information is changed When system information is changed When system information is changed When system information is changed When system information is changed When system information is changed
No
YES
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
Function: This parameter indicates whether the Function: InterFrequency Measuremen t Trigger Function: Sintersearch Configuration Tag. Configuration Function: IntraFrequency Measuremen t Trigger Function: Sintrasearch Configuration Tag. Configuration Function: High HCS Priority Intersystem Cell Measuremen function: Speed Dependent Scaling Factor for Function: Speed Dependent Scaling Factor for Function: Measuremen t Trigger Threshold for HCS Cell Function: SsearchHCS Configuration Tag. Configuration Function: Inter-System Measuremen t Trigger Threshold
The parameters of cell selection and The parament is set according to the cell The parament is set according to the cell The parament is set according to the cell The parament is set according to the cell The parament is set according to the cell The parament is set according to the velocities This function is not be used as usual. The parament is set according to the cell This function is not be used as usual. The parament is set according to the cell
When system information is changed When system information is changed When system information is changed When system information is changed When system information is changed When system information is changed When system information is changed When system information is changed When system information is changed When system information is changed When system information is changed
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
YES
No
N/A
No
N/A
No
N/A
No
N/A
Function: This parameter indicates the barred time Function: This parameter indicates the period for Function: This parameter indicates the additional Function: This parameter indicates the cell Function: This parameter indicates the cell Function: This parameter indicates the cell Reduced service outage period after cell Function: intrafrquency measuremen t quantity in Function: UE interfrequency event report configuration Function: UE interfrequency event report configuration Function: UE interfrequency event report configuration
This parameter should be set according to The parament is set according to the velocities The parament is set according to the velocities To guarentee the time of cell selection, To guarentee the time of cell selection, To guarentee the time of cell selection, Access delayl is taken into account in default value. This parameter should be set according to This parameter should be set according to This parameter should be set according to This parameter should be set according to
When system information is changed When system information is changed When system information is changed When system information is changed When system information is changed When system information is changed When system information is changed When system information is changed When best cell is changed When best cell is changed When best cell is changed
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
Function: UE interfrequency event report configuration Invalid, not support period measuremen t Invalid, not support period measuremen t Function: Sevice type in interfrequency measuremen Function: Interfrequency Measuremen t Function: UE interfrequency event report configuration Function: UE interfrequency event report configuration Function: UE interfrequency event report configuration Function: UE interfrequency event report configuration Function: Sevice type in intrafrequency measuremen Function: Sevice type in intrafrequency measuremen
This parameter should be set according to This parameter should be set according to This parameter should be set according to This parameter should be set according to This parameter should be set according to This parameter should be set according to This parameter should be set according to This parameter should be set according to This parameter should be set according to This parameter should be set according to This parameter should be set according to
When best cell is changed When best cell is changed When best cell is changed
When best cell is changed When best cell is changed When best cell is changed When best cell is changed
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
Function: UE inter-Rat event report configuration index for Function: UE inter-Rat event report configuration index for Function: UE inter-Rat period report configuration index for Function: UE inter-Rat period report configuration index for Function: The paramter is the service type index in Function: This parameter is the configuration Function: Handover difficult level is controlled by adjusting Function: To extend the minimum value of QrxLevMin(th Function: To extend the minimum value of QrxLevMin(th Function: To extend the minimum value of QrxLevMin(th Function: To extend the minimum value of QrxLevMin(th
This parameter should be set according to This parameter should be set according to This parameter should be set according to This parameter should be set according to This parameter should be set according to This parameter should be set according to Handover difficult level, handover timeliness, handover cell covering radius is taken into account in default value. cell covering radius is taken into account in default value. cell covering radius is taken into account in default value. cell covering radius is taken into account in default value.
When best cell is changed When best cell is changed When best cell is changed When best cell is changed
When best cell is changed When system information is changed When system information is changed When system information is changed When system information is changed
No
N/A
No
N/A
No
N/A
No
N/A
Function: The parameter is used to judge the Function: The parameter is used to judge the Function: The parameter is used to judge the Function: The parameter is used to judge the Function: HCS priority Configuration Rule: UE Function: the minimum required RX level Configuration Function: the minimum required RX level Configuration Function: To extend the minimum value of QrxLevMin(th Function: To extend the minimum value of QrxLevMin(th Function: To extend the minimum value of QrxLevMin(th Function: To extend the minimum value of QrxLevMin(th
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
Inter-Rat handover probability and load of GSM cell is Inter-Rat handover probability and load of GSM cell is Inter-Rat handover probability and load of GSM cell is Inter-Rat handover probability and load of GSM cell is HCS is not used in current network. Cell coverage area is taken into account in default Cell coverage area is taken into account in default cell covering radius is taken into account in default value. cell covering radius is taken into account in default value. cell covering radius is taken into account in default value. cell covering radius is taken into account in default value.
At next use
When best cell is changed When best cell is changed When best cell is changed When best cell is changed When system information is changed When system information is changed When system information is changed When system information is changed When system information is changed When system information is changed
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
Function: HCS priority Configuration Rule: UE mobility Function: the minimum required quality level Configuration Function: the minimum required quality level Configuration Function: the minimum required RX level Configuration Function: the minimum required RX level Configuration Function: neighboring GSM cells state Configuration Function: neighboring GSM cells priority Configuration Function: cell reselection penalty time Configuration Function: cell reselection penalty time Configuration Function: quality threshold level in HCS Configuration Function: quality threshold level in HCS Configuration
HCS is not used in current network. Cell coverage area is taken into account in default Cell coverage area is taken into account in default Cell coverage area is taken into account in default Cell coverage area is taken into account in default This parameter should be set according to network planning including GSM cells'location, Cell reselection difficult level is taken into account in Cell reselection difficult level is taken into account in Cell reselection difficult level is taken into account in Cell reselection difficult level is taken into account in
When system information is changed When system information is changed When system information is changed When system information is changed When system information is changed New connection
When best cell is changed When system information is changed When system information is changed When system information is changed When system information is changed
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
Function: quality offset of neighboring cells Function: quality offset of neighboring cells Function: temporary offset in cell reselection Configuration Function: temporary offset in cell reselection Configuration Function: HCS function switch Configuration Function: broadcast in SIB11 or SIB11bits.Be cause the Function: L3 filtering on the measuremen t results Function: used to delay event reporting, decrease Function: configuration index of the interfrequency Function: purpose and functions of interfrequency Function: used to indicate measuremen t event
Cell reselection difficult level is taken into account in Cell reselection difficult level is taken into account in Cell reselection difficult level is taken into account in Cell reselection difficult level is taken into account in HCS is not used in current network. Neighboring cells number and neighboring cells priority Signal quality variation and measuremen t timeliness Average handover times, handover success This parameter should be set according to This parameter should be set according to 3GPP definition is considered to define this default value.
When system information is changed When system information is changed When system information is changed When system information is changed When system information is changed New connection
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
No
N/A
Function: number of events required to be Function: measuremen t quantity of the interfrequency Function: RLC mode of the measuremen t report Function: Configuration Rule: measuremen t purpose Function: report rules of the interfrequency measuremen Function: used to delay event reporting, decrease Function: used to delay event reporting, decrease Function: used to delay event reporting, decrease Function: weight when eveluating cell's quality of non-used Function: weight when eveluating cell's quality of used Function: scene parameter for handover/res
Measuremen t purpose is considered to define this default value. Measuremen t accuracy is considered to define this default value. Accurate of transmit and system capacity are considered handover success rate is considered to define this System capacity is considered to define this default value. Average handover times and handover success rate Average handover times and handover success rate Average handover times, handover success rate Handover success rate is considered to define this handover success rate is considered to define this the actual scence is considered to define this default value.
When best cell is changed When best cell is changed When best cell is changed When best cell is changed When best cell is changed When best cell is changed When best cell is changed When best cell is changed When best cell is changed When best cell is changed
Immediately
No
N/A
No
N/A
No
YES
No
N/A
No
N/A
No
N/A
No
N/A
Function: scene parameter for handover/res Function: scene parameter for handover/res It shoulde be set to "Supported" if the external When UE is detected entering specific area from nonsetting according transport quality The bigger the parameter is, the better the UTRAN The bigger the parameter is, the better the UTRAN
the actual scence is considered to define this default value. the actual scence is considered to define this default value. Default value is set to "Not Support", which should be adjusted N/A
Immediately
Immediately
Take effect for the next call take effect on next action
N/A
Immediately
N/A
Immediately
N/A
Immediately
How to Impact If the value of the parameter is configured too large or If the value of the parameter is configured too large, the N/A
OMC Access path View>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NE-
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NE-
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NE-
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NE-
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NE-
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NE-
N/A
N/A
N/A
N/A
N/A The Related common transport channel will be The Related common transport channel will be N/A
N/A
N/A
N/A
View>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NE-
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NE-
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NE-
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NE-
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NE-
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NE-
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NE-
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NE-
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NE-
View>Configuratio N/A n Management ->RNC NEView>Configuratio N/A n Management ->RNC NEView>Configuratio N/A n Management ->RNC NEIf the cell Viewbarred >Configuratio indicator is n set to Management 'Barred', UEs ->RNC NEIf ViewInFreqReselI >Configuratio nd is "Not n Allowed" and Management CellRsvExt ->RNC NEView>Configuratio N/A n Management ->RNC NEView>Configuratio N/A n Management ->RNC NEView>Configuratio N/A n Management ->RNC NEView>Configuratio N/A n Management ->RNC NEView>Configuratio N/A n Management ->RNC NEView>Configuratio N/A n Management ->RNC NE-
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NE-
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NE-
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NE-
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NE-
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NE-
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NE-
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NE-
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NE-
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NE-
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NE-
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NEView>Configuratio n Management ->RNC NE-