DATA SHEET
M3D793
Philips Semiconductors
Product specication
BZB984 series
PINNING PIN 1 2 3 DESCRIPTION cathode 1 cathode 2 common anode
3
1
3 2
DESCRIPTION Low-power voltage regulator diodes in a SOT663 ultra small plastic SMD package. Fig.1
1
Top view
2
MHC314
MARKING TYPE NUMBER BZB984-C2V4 BZB984-C2V7 BZB984-C3V0 BZB984-C3V3 BZB984-C3V6 MARKING CODE 91 92 93 94 95 TYPE NUMBER BZB984-C3V9 BZB984-C4V3 BZB984-C4V7 BZB984-C5V1 BZB984-C5V6 MARKING CODE 96 97 98 99 9A TYPE NUMBER BZB984-C6V2 BZB984-C6V8 BZB984-C7V5 BZB984-C8V2 BZB984-C9V1 MARKING CODE 9B 9C 9D 9E 9F TYPE NUMBER BZB984-C10 BZB984-C11 BZB984-C12 BZB984-C13 BZB984-C15 MARKING CODE 9G 9H 9J 9K 9L
LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL IF IZSM Ptot PZSM Tstg Tj Note 1. Device mounted on an FR4 printed-circuit board. PARAMETER continuous forward current non-repetitive peak reverse current total power dissipation non-repetitive peak reverse dissipation storage temperature junction temperature tp = 100 s; square wave; Tamb = 25 C; prior to surge Tamb = 25 C; 2 diodes loaded; note 1 Tamb = 25 C; 1 diode loaded; note 1 tp = 100 s; square wave; Tamb = 25 C; prior to surge CONDITIONS MIN. MAX. 200 UNIT mA
2002 Jun 21
Philips Semiconductors
Product specication
BZB984 series
UNIT
A A A A A A A A A A A A A nA nA nA nA nA nA nA
2002 Jun 21
This text is here in white to force landscape pages to be rotated correctly when browsing through the pdf in the Acrobat reader.This text is here in _white to force landscape pages to be rotated correctly when browsing through the pdf in the Acrobat reader.This text is here inThis text is here in white to force landscape pages to be rotated correctly when browsing through the pdf in the Acrobat reader. white to force landscape pages to be ... Table 1 Per type BZB984-C2V4 to C15 Tj = 25 C unless otherwise specified. WORKING VOLTAGE VZ (V) at IZ = 5 mA BZB984Cxxx Tol. 5% MIN. 2V4 2V7 3V0 3V3 3V6 3V9 4V3 4V7 5V1 5V6 6V2 6V8 7V5 8V2 9V1 10 11 12 13 15 4 2.2 2.5 2.8 3.1 3.4 3.7 4.0 4.4 4.8 5.2 5.8 6.4 7.0 7.7 8.5 9.4 10.4 11.4 12.4 13.8 MAX. 2.6 2.9 3.2 3.5 3.8 4.1 4.6 5.0 5.4 6.0 6.6 7.2 7.9 8.7 9.6 10.6 11.6 12.7 14.1 15.6 DIFFERENTIAL RESISTANCE rdif () at IZ = 1 mA TYP. 275 300 325 350 375 400 410 425 400 80 40 30 30 40 40 50 50 50 50 50 MAX. 600 600 600 600 600 600 600 500 480 400 150 80 80 80 100 150 150 150 170 200 at IZ = 5 mA TYP. 70 75 80 85 85 85 80 50 40 15 6 6 6 6 6 8 10 10 10 10 MAX. 100 100 95 95 90 90 90 80 60 40 10 15 15 15 15 20 20 25 30 30 1.3 1.4 1.6 1.8 1.9 1.9 1.7 1.2 0.5 1.0 2.2 3.0 3.6 4.3 5.2 6.0 6.9 7.9 8.8 10.7 TEMP. COEFF. SZ (mV/K) at IZtest = 5 mA (see Figs 3 and 4) TYP. 450 450 450 450 450 450 450 300 300 300 200 200 150 150 150 90 90 85 80 75 DIODE CAP. Cd (pF) at f = 1 MHz; VR = 0 V MAX. 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 4.0 4.0 3.0 3.0 2.5 2.5 2.5 2.0 NON-REPETITIVE PEAK REVERSE CURRENT IZSM (A) at tp = 100 s; Tamb = 25 C MAX. 2002 Jun 21 Philips Semiconductors
Product specication
Philips Semiconductors
Product specication
BZB984 series
handbook, halfpage
300
MLD362
MLD363
handbook, halfpage
0.5
IF (mA) 200
SZ (mV/K) 0
4V7
0 0.6
0.7
0.8
0.9
VF (V)
2 101
10
IZ (mA)
102
Fig.2
Fig.3
2002 Jun 21
Philips Semiconductors
Product specication
BZB984 series
handbook, halfpage
12
MLD364
SZ (mV/K) 8
4 101
10
IZ (mA)
102
Fig.4
2002 Jun 21
Philips Semiconductors
Product specication
BZB984 series
SOT663
Y HE
1
e1 e bp
2
w M B Lp detail X
1 scale
2 mm
DIMENSIONS (mm are the original dimensions) UNIT mm A 0.6 0.5 bp 0.33 0.23 c 0.18 0.08 D 1.7 1.5 E 1.3 1.1 e 1.0 e1 0.5 HE 1.7 1.5 Lp 0.3 0.1 w 0.1 y 0.1
EUROPEAN PROJECTION
2002 Jun 21
Philips Semiconductors
Product specication
BZB984 series
This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specication in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specication without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Changes will be communicated according to the Customer Product/Process Change Notication (CPCN) procedure SNW-SQ-650A.
Preliminary data
Qualication
Product data
Production
Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. DEFINITIONS Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. DISCLAIMERS Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified.
2002 Jun 21
Philips Semiconductors
Product specication
BZB984 series
2002 Jun 21
Philips Semiconductors
Product specication
BZB984 series
2002 Jun 21
10
Philips Semiconductors
Product specication
BZB984 series
2002 Jun 21
11
Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 For sales ofces addresses send e-mail to: sales.addresses@www.semiconductors.philips.com.
SCA74
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights.
613514/02/pp12
Jun 21