Welded Mesh
SHEETS Standard Specications
BS 4483 BRC Ref No. or SS:32 Ref No. SQUARE MESHES A10 A393 A9 A8 A252 A7 A193 A6 A142 D12 D11 D10 D9 D8 D7 D6 Main Wire Size Spacing mm mm 10 9 8 7 6 12 11 10 9 8 7 6 200 200 200 200 200 100 100 100 100 100 100 100 Cross Wire Cross-Sectional Area Mass Per Size Spacing Main Cross Unit Area mm mm mm/m mm/m kg/m 10 9 8 7 6 12 11 10 9 8 7 6 200 200 200 200 200 100 100 100 100 100 100 100 393 318 252 193 142 1131 950 785 636 503 385 283 393 318 252 193 142 1131 950 785 636 503 385 283 6.16 4.99 3.95 3.02 2.22 17.78 14.91 12.32 9.98 7.90 6.04 4.44 BS 4483 BRC Ref No. or SS:32 Ref No. Main Wire Size Spacing mm mm RECTANGULAR MESHES B13 13 100 B12 1131 12 100 B11 11 100 B10 785 10 100 B9 9 100 B8 503 8 100 B7 385 7 100 B6 283 6 100 B5 196 5 100 100 12 C12 11 100 C11 10 100 C10 785 9 100 636 C9 8 100 503 C8 7 100 C7 385 100 6 C6 283 Cross Wire Cross-Sectional Area Mass Per Size Spacing Main Cross Unit Area mm mm mm/m mm/m kg/m 10 8 8 8 8 8 7 7 7 8 8 6 6 5 5 5 200 200 200 200 200 200 200 200 200 400 400 400 400 400 400 400 1328 1131 950 785 636 503 385 283 196 1131 950 785 636 503 385 283 393 252 252 252 252 252 193 193 193 126 126 71 71 49 49 49 13.50 10.9 9.43 8.14 6.97 5.93 4.53 3.73 3.05 9.87 8.44 6.72 5.55 4.34 3.41 2.61
Building Products
Angle Bead
Protects plaster arrises; one size adjusts for thickness, ref 550 standard, ref 558 Maxicon (economy version). Also available in stainless steel.
Form Rib
Riblath
Used for external rendering and for interior plastering where high corrosion resistance is needed; ref 267.
AI00504 AI00505
L.D. AI00505 H.D. AI00504 0.30 (THK) x 2400 (L) x 610 (W)mm
Plaster Stop
Finishes plaster edges. In four depths: ref 562 10mm, ref 563 13mm, ref 566 19mm. Also available in stainless steel.
Strip Mesh
Brick Mesh
BUILDING MATERIAL
G-Loc Splices
Specications
Code No. Code No. AI00713 AI00714 AI00715 AI00716 AI00717 AI00718 AI00719 AI00720 AI00721 G-6 G-7 G-8 G-9 G-10 G-11 G-12 G-14 G-18 For Bar Size mm 20 22 25 28 32 35 38 44 57 in
3/4 7/8
Sleeve I/D mm 22.6 24.4 28.5 32.4 36.0 39.6 44.8 47.0 67.0 in 0.89 0.96 1.12 1.28 1.42 1.56 1.76 1.85 2.64
Sleeve Length A mm 152 152 152 152 178 203 203 254 305 in 6 6 6 6 7 8 8 10 12
Wedge Length B mm 203 203 203 203 229 254 254 305 355 in 8 8 8 8 9 10 10 12 14
Material Thickness mm 2.1 2.1 2.2 2.2 2.3 2.3 2.5 2.6 3.0
Reducer Inserts
Specications
Code No. G-1811 G-1411 G-1110 G-1009 G-98 G-87 Used With GLoc 57mm 44mm 35mm 32mm 28mm 25mm For Bar Size From 57 to 44 44 to 35 35 to 32 32 to 28 28 to 25 25 to 22
Reinforce Bars
Specications (nominal diameter)
BS 785-67 High Yield 60 (BS 4449-69) mm 10 (3/8) 13 (1/2) 16 (5/8) (3/4) 20 (7/8) 22 25 (1) 28 (11/8) 32 (11/4) 35 (13/8) 38 (11/2) JIS G 3112-64 ASTM-A305-56 mm 9.53 12.7 15.9 19.1 22.2 25.4 28.6 31.8 34.9 38.1 41.3 in 0.75 0.500 0.625 0.750 0.875 1.000 1.128 1.270 1.410
D10 D13 D16 D19 D22 D25 D29 D32 D35 D38 D41
#3 #4 #5 #6 #7 #8 #9 # 10 # 11
G-LOC SLEEVE
G-LOC WEDGE
Perforated Metals
Open Area Calculation Hole Number Calculation 60 Deg Staggered Round Hole
197
BUILDING MATERIAL
Shuttering Accessories
Dropforged quality for all shuttering systems. The vote for long life material quality
Allinton offers to the building industry a wide range of shuttering accessories of the highest quality. Scaffolding couplers and shutteing components are mostly dropforged, which offer signicant advantages compared with accessories produced by other means. Dropforgings have considerably better material properties, such as the greater toughness and tensile strength necessary to ttings under dynamic stress. Dropforged shuttering components will stand up much longer to hostile building site conditions owing to their greater wear resistance and also offer the benets of a markedly higher load factor. Indispensable: the Richee Tierod A essential component among shuttering accessories is the Richee tierod. It matches all other items such as base plates, threaded base and header plates, wing nuts and hexagonal nuts.
TieRod
15mm , load: P permissible 91 kN (DIN 18 216). (Continuos thread, Dywidag dimensions)
Water Barrier
Thread: 15mm
Plug
For resealing tube supports Material: PVC
AI00737
AI00738
AI00740
AI00741
Wedge Clamp
Greater formwork pressure, bigger clamping with clip. Double Locking plus around 40% time saving for tting and removing.
AI00742
AI00743
48.6 Pipe Joint AI00912 48.6 Base AI00910 42.7 Pipe Joint AI00746
BUILDING MATERIAL
Form Tie
Stud Wale FORMTIE Wale
21065
Inner Unit Parts Quantity Diameter Form Tie with a Nut 2 pcs W5/16 W3/8 Inner Unit B 1 pc W5/16 W3/8 Plastic Cone 2 pcs W5/16 W3/8 Flat Rib Washer 2 pcs Common Parts Form Tie with a Nut Inner Unit C Flat Rib Washer
Quantity 2 pcs 1 pc 1 pc
L50 Cone
Slab Jointer
21076
21077
21078
21079
Cone
Panel Metal Form Diagrams A (m/m) For Metal 12 Ply Wood Panel
21069
B
W3/8 W3/8 W3/8 W3/8
Remarks a. There are two diameters for inner units i.e. W5/16 and W3/8 b. A Panel thickness B Panel thickness
16 24
How to Order: Please specify concrete panel thickness (A) and the inne unit diameter (B). (Ex. Plastic Cone 12m/m x W5/16)
Type D
21071
How to Order: Please specify panel thickness (A) and the Inner Unit diameter (B)
Formite Spanner
21074
21075
199
BUILDING MATERIAL
Scaffold Clamp / Pipe Clamp / End Clamp
Size
Beam Clamp Swivel
GH4666
Type Scaffold Keeper A350 Adjustable Length 280~400 Pipe Length 190 Thread Length 155
Scaffold Chain
21122
Test Load Braking Load Safety Working Load Single Use Loop Use
Size
1m 2m 3m 4m 5m 6m
Turubuckles
Specications Model No. M60 M70 M90 Fully Extended Closed 3,110mm (102) 1,860mm (61) 3,400mm (112) 2,165mm (71) 4,000mm (132) 2,755mm (91) Weight 12.9kgs 13.8kgs 15.2kgs
BUILDING MATERIAL
Scaffolding
Components
21080
21081 21082
21083
21085
21090
21091
21092
End Frame
Code R-1212L A B 1219 1219 Wt. kg 15
End Frame
Code R-1215L A B 1219 1524 Wt. kg 17
End Frame
Code R-1209L A 1219 B 914 Wt. kg 11
21096
21099
21104
Scaffold Board
21093
Swivel Castor
Length 4000 3000 2000 Wt. kg 14 10.5 7 Code WH5 WH6 WH8 A 130 150 200 Wt. kg 3.7 4.2 6.2
Cat Walk
Code RC-518 A B 1829 500
21094 Wt. kg 16
Couplers
21107 Size (mm) 42.7 x 42.7 B 250 450 Wt. kg 3.2 4.2 42.7 x 48.6 48.6 x 48.6 Wt. kg Right Angle C-1 E-1 B-1 0.7
Cross Brace
Code R-1812 R-1512 R1212 R-1809 R-1509 R-1209 R-1806 R-1506 R-1206 R-0906 R-1803 R-1503 R-1203 A 1829 1524 1219 1829 1524 1219 1829 1524 1219 914 1829 1524 1219 B 1219 1219 1219 914 914 914 610 610 610 610 280 280 280
21115 C Wt.kg 2198 4.2 1952 3.7 1724 3.3 2045 4.0 1777 3.4 1524 2.9 1928 3.7 1642 3.2 1363 2.6 1099 2.2 1850 3.5 1549 3.0 1250 2.8
Adjustable Base
Code RC-40 RC-60 A 400 600
21108
Arm Lock
Code RC-826 RC-739 RC-509 RC-441 RC-333 RC-5 RC-419 A 826 737 507 441 330 501 417
Adjustable Uhead
Code RC-40H RC-60H A 400 600 B 230 430 Wt. kg 4 5
Stair
Code R-917S R-1219S A 450 450 B 1725 1955
21116 Wt. kg 26 28
201