introduction
This Site Specific Buyers Guide provides you with essential information to identify the steel products needed for your site specific applications. It takes you step-by-step through the decision making process of ordering antenna mounting components for lattice towers, monopoles, and roof-top applications. Since no two sites are exactly the same, this easy-to-use guide provides the questions and answers you need to consider for each unique site and product type. Now you can be assured that the products you order are correct for your wireless component requirements. Ordering Steel Products has never been easier.
For a complete list of steel products and detailed specifications, visit www.andrew.com/products/steel or request the Steel Products Catalog (bulletin CA-101163-EN).
table of contents
tower applications...............................................................................1
quick-tee sector frames .....................................................................................2 universal cable ladder kits....................................................................................3 star support brackets ...........................................................................................3
1-800-255-1479
fax 1-800-349-5444
1-800-255-1479
fax 1-800-349-5444
tower applications
Quik-Tee Sector Frames
Application: Size: Design: Feature: Mounts to: Material: Includes: Lattice towers 10 ft 6 in (3.1 m) to 12 ft 6 in (3.8 m) face Welded frame with 48 in (1.2 m) stand-off Quickly assembled, dual pivoting frame with universal taper kit. Patented. Straight or tapered legs up to 8 in OD, 8 in angle 60, or 6 in angle 90 Hot dip galvanized steel Frame, clamps, stiff arm, pipes and saddle mounts
Quik-Tee Sector Frames 10 ft 6 in (3.1 m) wide
QT-SF10-2-72 Quik-Tee Sector Frame, 10 ft 6 in (3.1 m). Two 2-3/8 in OD x 72 in (60.3 mm OD x 1.8 m) pipe mounts included. Quik-Tee Sector Frame, 10 ft 6 in (3.1 m). Two 2-3/8 in OD x 96 in (60.3 mm OD x 2.4 m) pipe mounts included. Quik-Tee Sector Frame, 10 ft 6 in (3.1 m). Two 2-3/8 in OD x 126 in (60.3 mm OD x 3.2 m) pipe mounts included. Quik-Tee Sector Frame, 10 ft 6 in (3.1 m). Three 2-3/8 in OD x 72 in (60.3 mm OD x 1.8 m) pipe mounts included. Quik-Tee Sector Frame, 10 ft 6 in (3.1 m). Three 2-3/8 in OD x 96 in (60.3 mm OD x 2.4 m) pipe mounts included. Quik-Tee Sector Frame, 10 ft 6 in (3.1 m). Three 2-3/8 in OD x 126 in (60.3 mm OD x 3.2 m) pipe mounts included. Quik-Tee Sector Frame, 10 ft 6 in (3.1 m). Four 2-3/8 in OD x 72 in (60.3 mm OD x 1.8 m) pipe mounts included. Quik-Tee Sector Frame, 10 ft 6 in (3.1 m). Four 2-3/8 in OD x 96 in (60.3 mm OD x 2.4 m) pipe mounts included. Quik-Tee Sector Frame, 10 ft 6 in (3.1 m). Four 2-3/8 in OD x 126 in (60.3 mm OD x 3.2 m) pipe mounts included. 377.97 171.4 Each
QT-SF10-2-96
402.97
182.8
Each
QT-SF10-2-126
415.37
188.4
Each
QT-SF10-3-72
398.97
181
Each
436.47
198
Each
P A R T
N U M B E R
FACE WIDTH
G U I D E
PIPE QTY PIPE LENGTH
QT-SF10-3-126
455.07
206.4
Each
DESCRIPTION
Q T - S F 1 2 - 3 - 7 2
Quick-Tee Sector Frame 12 3 Antenna Pipes 72
QT-SF10-4-72
419.97
190.5
Each
QT-SF10-4-96
469.97
213.2
Each
QT-SF10-4-126
494.77
224.4
Each
QT-SF12-2-96
417.96
189.6
Each
QT-SF12-2-126
430.36
195.2
Each
QT-SF12-3-72
413.96
187.8
Each
QT-SF12-3-96
6 10- ) .1m
(3
451.46
204.8
Each
Dual
Pivot
Poin
ts
QT-SF12-3-126
470.06
213.2
Each
QT-SF12-4-72
Stand-off Distance 48 (1.2m)
434.96
197.3
Each
QT-SF12-4-96
484.96
220
Each
10
QT-SF12-4-126
40
(1m)
509.76
231.2
Each
Man Rating: 250 lb vertical man load at 15 mph (BWS) Wind Rating*: 90 mph per latest revision of TIA/EIA 222 at 150 ft AGL
1-800-255-1479
fax 1-800-349-5444
tower applications
Universal Cable Ladder Kits
Application: Size: Design: Feature: Mounts to: Material: Includes: Lattice towers 10 ft (3 m) and 20 ft (6 m) in three widths Angle rails with bolt-on channel rungs Complete ladder kit Round and angle legs Hot dip galvanized steel Ladder, splice plates, and attachment kits
CL-1210-U CL-0910-U
59
27.0
Each
62
28.0
Each
20
CL-0620-U
20
(508mm)
Universal Cable Ladder Kit, 20 in wide x 20 ft long 112 (355.6 mm x 6 m), 6-hole rung. Includes universal hardware kit for round and angle members. Universal Cable Ladder Kit, 30 in wide x 20 ft long 117 (762 mm x 6 m), 9-hole rung. Includes universal hardware kit for round and angle members. Universal Cable Ladder Kit, 38 in wide x 20 ft long 121 (1 m x 6 m), 12-hole rung. Includes universal hardware kit for round and angle members.
50.8
Each
CL-0920-U
52.9
Each
20 10
(3.0m) (6.1m)
CL-1220-U
55.1
Each
40
(1.0m)
Description
Wt. lb
Wt. kg
Kit Qty.
SS-TB6080
10
4.5
Each
(50.8mm)
(457
1 8 m) .2m
1-800-255-1479
fax 1-800-349-5444
1-800-255-1479
fax 1-800-349-5444
monopole applications
Monopole Co-location T-frame Kits
Application: Size: Design: Feature: Mounts to: Material: Includes: Monopoles 12 ft 6 in (3.8 m) and 14 ft 6 in (4.4 m) face 3-sector Complete co-location kit 10 in to 60 in (254 mm to 1542 mm) OD monopole Hot dip galvanized steel Ring mount, support arm, and pipe mounts
MC-K12S-6-96
455.7
Each
MC-K12S-9-72
478.7
Each
MC-K12S-9-96
511.3
Each
MC-K12S-12-72
523.4
Each
P A R T
DESCRIPTION
N U M B E R
FACE WIDTH
G U I D E
PIPE QTY PIPE LENGTH
MC-K12S-12-96
566.8
Each
M C - K 1 2 S - 9 - 7 2
Monopole T-Frame 12 10-30 9 Ring Antenna Mount Pipes 72
MC-K12L-6-96
510.1
Each
MC-K12L-9-72
533.1
Each
MC-K12L-9-96
565.6
Each
MC-K12L-12-72
577.8
Each
MC-K12L-12-96
621.1
Each
MC-K14S-6-96
488.4
Each
MC-K14S-9-72
3-1/2 OD
(89mm)
511.4
Each
2-3/8 OD
(60.3mm)
MC-K14S-9-96
543.9
Each
MC-K14S-12-72
556.1
Each
MC-K14S-12-96
mm) (914.4
599.4
Each
36
14 ft 6 in Face
1 3.8 (
Man Rating: 250 lb vertical man load at 15 mph (BWS) Wind Rating*: 120 mph (BWS) per latest revision of TIA/EIA 222 140 mph 3-second gust, Exposure D per FBC, at 150 ft AGL
1-800-255-1479
fax 1-800-349-5444
monopole applications
Monopole Co-location T-frame Kits
continued
ORDERING INFORMATION Part Number Description Wt. lb Wt. kg Kit Qty.
MC-K14L-6-96
542.7
Each
MC-K14L-9-72
565.7
Each
MC-K14L-9-96
598.3
Each
MC-K14L-12-72
610.4
Each
MC-K14L-12-96
653.8
Each
MC-PK12S-9-96
676.0
Each
MC-PK12S-9-126 Low-Profile Co-location Platform Kit, 1562.4 12 ft 6 in (3.8 m) face. 10 in to 30 in OD (254 mm to 762 mm), 31.4 in to 94.2 in (797.6 mm to 2392.7 mm) circumference. Nine 2-3/8 in OD x 126 in (60.3 mm x 3.2 m) pipe mounts included. MC-PK12S-12-72 Low-Profile Co-location Platform Kit, 1517.1 12 ft 6 in (3.8 m) face. 10 in to 30 in OD (254 mm to 762 mm), 31.4 in to 94.2 in (797.6 mm to 2392.7 mm) circumference. Twelve 2-3/8 in OD x 72 in (60.3 mm x 1.8 m) pipe mounts included. MC-PK12S-12-96 Low-Profile Co-location Platform Kit, 1612.8 12 ft 6 in (3.8 m) face. 10 in to 30 in OD (254 mm to 762 mm), 31.4 in to 94.2 in (797.6 mm to 2392.7 mm) circumference. Twelve 2-3/8 in OD x 96 in (60.3 mm x 2.4 m) pipe mounts included. MC-PK12S-12-126 Low-Profile Co-location Platform Kit, 1708.8 12 ft 6 in (3.8 m) face. 10 in to 30 in OD (254 mm to 762 mm), 31.4 in to 94.2 in (797.6 mm to 2392.7 mm) circumference. Twelve 2-3/8 in OD x 126 in (60.3 mm x 3.2 m) pipe mounts included.
708.7
Each
688.2
Each
731.6
Each
775.1
Each
P A R T
DESCRIPTION
N U M B E R
FACE WIDTH
G U I D E
PIPE QTY PIPE LENGTH
M C - P K 1 2 S - 1 2 - 9 6
Monopole Colocation Platform Kit 12 10-30 12 Ring Antenna Mount Pipes 96
1-800-255-1479
fax 1-800-349-5444
monopole applications
Low-profile Co-location Platform Kits
continued
Face Width 12 ft 6 in Face 14 ft 6 in Face EPA (no ice, sq ft): 8.75 10.2 EPA (1/2 in radial ice, sq ft): 11.3 13.1
MC-PK14S-9-96
Man Rating: 250 lb vertical man load at 15 mph (BWS) Wind Rating*: 120 mph (BWS) per latest revision of TIA/EIA 222 140 mph 3-second gust, Exposure D per FBC, at 150 ft AGL
721.5
Each
MC-PK14S-9-126 Low-Profile Co-location Platform Kit, 14 ft 6 in 1662.6 (4.4 m) face. 10 in to 30 in OD (254 mm to 762 mm), 931.4 in to 94.2 in (797.6 mm to 2392.7 mm) circumference. Nine 2-3/8 in OD x 126 in (60.3 mm x 3.2 m) pipe mounts included. MC-PK14S-12-72 Low-Profile Co-location Platform Kit, 14 ft 6 in 1617.4 (4.4 m) face. 10 in to 30 in OD (254 mm to 762 mm), 31.4 in to 94.2 in (797.6 mm to 2392.7 mm) circumference. Twelve 2-3/8 in OD x 72 in (60.3 mm x 1.8 m) pipe mounts included. MC-PK14S-12-96 Low-Profile Co-location Platform Kit, 14 ft 6 in 1713.0 (4.4 m) face. 10 in to 30 in OD (254 mm to 762 mm), 31.4 in to 94.2 in (797.6 mm to 2392.7 mm) circumference. Twelve 2-3/8 in OD x 96 in (60.3 mm x 2.4 m) pipe mounts included. MC-PK14S-12-126 Low-Profile Co-location Platform Kit, 1809.0 14 ft 6 in (4.4 m) face. 10 in to 30 in OD (254 mm to 762 mm), 31.4 in to 94.2 in (797.6 mm to 2392.7 mm) circumference. Twelve 2-3/8 in OD x 126 in (60.3 mm x 3.2 m) pipe mounts included.
754.2
Each
3-1/2" OD
(89mm)
733.7
Each
777.0
Each
820.6
Each
12' -6"
MC-PK14L-9-96
851.5
Each
MC-PK14L-9-126
884.2
Each
MC-PK14L-12-72
863.7
Each
MC-PK14L-12-96
907.0
Each
MC-PK14L-12-126 Low-Profile Co-location Platform Kit, 14 ft 6 in 2095.6 (4.4 m) face. 30 in to 60 in OD (762 mm to 1524 mm), 94.2 in to 188.4 in (2392.7 mm to 4785.4 mm) circumference. Twelve 2-3/8 in OD x 126 in (60.3 mm x 3.2 m) pipe mounts included.
950.6
Each
Description
Wt. lb
1-800-255-1479
fax 1-800-349-5444
monopole applications
Low Profile Chain Mounts
Application: Size: Design: Feature: Mounts to: Material: Includes: Monopoles 2-3/8 in (60.3 mm) OD pipe mounts 3- or 6- antenna chain mounts Universal, low profile mount 8 in to 60 in (203.2 mm to 1524 mm) OD Hot dip galvanized steel See ordering information
6 to Pipe Face
(153mm)
Triple Chain Mount Kits, 8 in to 30 in (203.2 mm to 711.2 mm) OD, 25 in to 94.2 in (635 mm to 2393 mm) circumference
CM-30T-72 CM-30T-96 Triple Chain Mount Kit, three 2-3/8 in OD x 72 in pipes, 8 ft chain Triple Chain Mount Kit, three 2-3/8 in OD x 96 in pipes, 8 ft chain 113.76 151.26 51.6 68.6 Each Each
Triple Chain Mount Kits, 8 in to 60 in (203.2 mm to 1524 mm) OD, 25 in to 188 in (635 mm to 4785 mm) circumference
CM-60T-72 CM-60T-96 Triple Chain Mount Kit, three 2-3/8 in OD x 72 in pipes, 16 ft chain Triple Chain Mount Kit, three 2-3/8 in OD x 96 in pipes, 16 ft chain 123.76 163.26 56.1 74.1 Each Each
8 or 16 Long Chain
(2.44m or 4.9m)
Six Antenna Chain Mount Kits, 14 in to 60 in (356 mm to 1524 mm) OD, 44 in to 188 in (1117 mm to 4785 mm) circumference
CM-606-72 CM-606-96
2-3/8 OD Pipe
(60.3mm)
Six Antenna Mount Kit, three 2-3/8 in OD x 72 in pipes, 16 ft chain Six Antenna Mount Kit, three 2-3/8 in OD x 96 in pipes, 16 ft chain
231 275
104.8 124.7
Each Each
Man Rating: 250 lb vertical man load at 15 mph (BWS) Wind Rating*: 120 mph (BWS) 1/2 in radial ice at100 ft AGL per latest revision of TIA/EIA222
P A R T
N U M B E R
MONOPOLE PIPE OD QTY
G U I D E
PIPE LENGTH
DESCRIPTION
C M - 6 0 T - 7 2
Chain Mount
2-3/8(60.3mm) OD Pipe
60
3 Pipes
72
Description
Expansion/Compression Coaxial Mounting Band for 10 in to 60 in (254 mm to 1524 mm) OD round or polygon monopoles or 36 in to 60 in (914.4 mm to 1524 mm) ID access tubes 3 Hole Coaxial Mounting Bracket for expanding line capacity on Ex-Press Band
Wt. lb
6.2
EX-PH3
2.8
1.2
Kit of 10
1-800-255-1479
fax 1-800-349-5444
Choose the Cable Support-Roof-top Cover Applications (page 12) Self-splicing Coaxial Cable Cover Kits
1. How many holes are required (determined by the amount of coaxial cables required, coaxial cables may be stacked using SnapStak hangers)? Options: 4, 8, or 12 holes 2. What are the stacking configurations available? Options: 7/8 in cable (triple stacked), 1-1/4 in cable and 1-5/8 in cable (double stacked) 3. What is the section length (determined by the sectional length needed to reach the mount)? Option: 8 ft Z-bracket, Wall Coaxial Cable Support Covers (cover and Z-brackets sold separately) 1. How many holes are required (determined by the amount of coaxial cables required, coaxial cables may be stacked)? Options: 4, 8, or 12 holes 2. What is the width (determined by the amount of coaxial cables required, coaxial cables may be stacked using SnapStak hangers)? Options: 11-1/2 in, 23-1/2 in, or 35-1/2 in 3. What are the stacking configurations available? Options: 7/8 in (triple stacked), 1-1/4 in and 1-5/8 in (double stacked) 4. What is the section length (determined by the sectional length needed to reach the mount)? Option: 8 ft 5. What Z-bracket is required (determined by the cover purchased)? Options: 4, 8, or 12 hole Z-bracket (2 per cover)
Cantilever Wall Mount Bracket (page 11)
Z-bracket, Wall Coax Support Covers for SnapStak Hangers (page 12)
Self-splicing, Coax Cover Kits for SnapStack Hangers (page 12) Non-penetrating Roof Frames (pages 10-11)
Choose the Equipment Platform (page 14) (See options on Page 1 of this guide)
1-800-255-1479
fax 1-800-349-5444
roof-top applications
Non-penetrating Roof Frames
Application: Size: Design: Feature: Material: Includes: Roof-top 7 ft (2.1 m) to 14 ft 6 in (4.4 m) face Single sector roof mount Complete kit Hot dip galvanized steel Rubber mats, and pipe mounts
RF-N7-2-126 RF-N7-2-96
399.0
181.0
Each
416.9
189.1
Each
RF-N10-3-96
200.8
Each
RF-N10-3-126
213.1
Each
RF-N10-4-72
200.8
Each
RF-N10-4-96
213.9
Each
RF-N10-4-126
230.2
Each
RF-N12-3-96
207.9
Each
RF-N12-3-126
220.2
Each
RF-N12-4-72
207.9
Each
41.5
(1.05m)
RF-N12-4-96
Cinder Block Trays
221.0
Each
74.6
(1894.8mm)
RF-N12-4-126
33.1
(840.7mm)
237.3
Each
(2.1
8 4
m)
P A R T
N U M B E R
FACE WIDTH PIPE QTY
G U I D E
PIPE LENGTH
DESCRIPTION
Wind Rating*: 85 mph (BWS) per latest revision of TIA/EIA 222 Exposure "C" per UBC, at 100 ft AGL
R F - N 1 0 - 4 - 9 6
Non-Penetrating Roof Frame 10 4 Antenna Pipes 96
*Typical installation of four 120 in x 8 in panel antennas per sector Engineering data table for ballast available upon request
1-800-255-1479
fax 1-800-349-5444
10
roof-top applications
Non-penetrating Roof Frames
continued
ORDERING INFORMATION Part Number Description Wt. lb Wt. kg Kit Qty.
RF-N14-3-96
208.8
Each
RF-N14-3-126
221.1
Each
RF-N14-4-72
208.8
Each
RF-N14-4-96
221.9
Each
RF-N14-4-126
238.2
Each
Description
Cantilever Wall Mount Bracket. Order 2-3/8 in (60.3 mm) OD pipe separately. Cantilever Wall Mount Bracket. 5-1/2 in Standoff. Order 2-3/8 in (60.3 mm) OD pipe separately.
Wt. lb
20.6 24.5
5m (30
12 m)
(76
3 m) m
.2
11
1-800-255-1479
fax 1-800-349-5444
roof-top applications
Self Splicing, Coax Cover Kits for SnapStak Snap-in Hangers
Application: Size: Design: Feature: Mounts to: Material: Includes: Roof-top 8 ft (2.4 m) long Self-splicing cover with PVC sleeper supports and hold-down clamps, simplified cover installation Stack up to two 1-5/8 in or three 7/8 in SnapStak hangers per holethree versions Non-penetrating design Hot dip galvanized steel Channel, three sleepers, hold-down clamps, and hardware
4 Square
(101.6mm)
Description
Roof-Top Cover Kits for SnapStak Snap-in Hangers, 4 holes Roof-Top Cover Kits for SnapStak Snap-in Hangers, 8 holes Roof-Top Cover Kits for SnapStak Snap-in Hangers, 12 holes
Wt. lb
86.0 122.5 162.5
96 m) .4
(2
(177.8mm)
Shown with double 1-5/8 in SnapStak hangers. Allows triple stacking of 7/8 in SnapStak hangers.
11-1/4, 21-1/4 or 33
Description
Z-bracket, Wall Coax Support Covers for SnapStak Hangers. ZB-H4 Z-brackets sold separately. Z-bracket, Wall Coax Support Covers for SnapStak Hangers. ZB-H8 Z-brackets sold separately. Z-bracket, Wall Coax Support Covers for SnapStak Hangers. ZB-H12 Z-brackets sold separately.
Wt. lb
73.3
WC-SC8D
99.5
45.1
Each
WC-SC12D
125.8
57.0
Each
96 m) .4
(2
(228.6mm)
Allows double stacking of 1-5/8 in SnapStak hangers. Allows triple stacking of 7/8 in SnapStak hangers.
11-1/2, 23-1/2, or 35-1/2
Horizontal Z-brackets
Application: Size: Design: Feature: Material: Includes: Roof-top 3/4 in (19.1 mm) and 7/16 in (11.1 mm) holes Z-shaped coaxial cable bracket Fits any hanger style Hot dip galvanized steel Z-bracket
Description
Horizontal Z-bracket, 11 in (279.4 mm) wide for seven runs of coaxial cable Horizontal Z-bracket, 23 in (584.2 mm) wide for fourteen runs of coaxial cable Horizontal Z-bracket, 35 in (889 mm) wide for twenty two runs of coaxial cable
Wt. lb
2.6 5.3 8.1
2-7/8m)
(73m
(39.7mm)
1-9/16
5- .7mm 9 (13
1 /2
(19.1mm) (11.1mm)
3/4
7/16
1-800-255-1479
fax 1-800-349-5444
12
Description
Safety Grated Waveguide Bridge Kit, 12 in x 10 ft (0.3 m x 3.0 m), with two 13 ft 4 in (4.1 m) direct burial posts Safety Grated Waveguide Bridge Kit, 12 in x 10 ft (0.3 m x 3.0 m), with two 10 ft 6 in (3.2 m) base shoe posts Safety Grated Waveguide Bridge Kit, 24 in x 10 ft (0.6 m x 3.0 m), with two 13 ft 4 in (4.1 m) direct burial posts Safety Grated Waveguide Bridge Kit, 24 in x 10 ft (0.6 m x 3.0 m), with two 15 ft 4 in (4.7 m) direct burial posts Safety Grated Waveguide Bridge Kit, 24 in x 10 ft (0.6 m x 3.0 m), with two 21 ft (6.4 m) direct burial posts Safety Grated Waveguide Bridge Kit, 24 in x 10 ft (0.6 m x 3.0 m), with two 10 ft 6 in (3.2 m) base shoe posts
Wt. lb
325.0
308.0
139.7
Each
385.0
174.6
Each
WB-K210-B15
415.3
188.4
Each
WB-K210-B21
(3.0 m)
501.2
227.3
Each
10
WB-K210-S
367.0
166.5
Each
13 -4, 15 -4, or 21
(4.1 m, 4.7 m, or 6.4 m)
12 or 24
3-1/2 OD
(89 mm)
WB-K110-B
WB-K210-S
Description
Safety Grated Waveguide Bridge Kit, 24 in x 10 ft (0.6 m x 3.0 m), with four 13 ft 4 in (4.1 m) direct burial posts Safety Grated Waveguide Bridge Kit, 24 in x 10 ft (0.6 m x 3.0 m), with four 15 ft 4 in (4.7 m) direct burial posts Safety Grated Waveguide Bridge Kit, 24 in x 10 ft (0.6 m x 3.0 m), with four 21 ft (6.4 m) direct burial posts Safety Grated Waveguide Bridge Kit, 24 in x 10 ft (0.6 m x 3.0 m), with four 10 ft 6 in (3.2 m) base shoe posts
Wt. lb
596.0
WB-K410-B15
656.6
297.8
Each
WB-K410-B21
828.3
373.7
Each
WB-K410-S
10 ) m
560.0
254.0
Each
(610 mm)
24
(3.0
13 -4, 15 -4, or 21
(4.1 m, 4.7 m, or 6.4 m)
3-1/2 OD
(89 mm)
13
1-800-255-1479
fax 1-800-349-5444
Equipment Platform, 10 ft x 15 ft 2610 (3 m x 4.6 m) base with sixteen displacement legs Equipment Platform, 10 ft x 20 ft 3506 (3 m x 6.1 m) base with twenty displacement legs
1 (3. 0' 0m )
Note: Equipment platforms in additional sizes available. Contact the Customer Support Center for details.
EQ-P-AL EQ-P-DF
4
(101.6mm)
1-800-255-1479
fax 1-800-349-5444
14
15
1-800-255-1479
fax 1-800-349-5444
fraction/decimal/metric chart
Inches Fraction 1/16 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 Inches Decimal 0.0625 0.1250 0.1875 0.2500 0.3125 0.3750 0.4375 0.5000 0.5625 0.6250 0.6875 0.7500 0.8125 0.8750 0.9375 1.0000 Millimeters 1.6 3.2 4.8 6.4 7.9 9.5 11.1 12.7 14.3 15.9 17.5 19.1 20.6 22.2 23.8 25.4
steel thicknesses
Gage 10 11 12 13 14 15 16 Thickness (inches) 0.1345 0.1196 0.1046 0.0897 0.0747 0.0673 0.0598 Thickness (mm) 3.416 3.038 2.657 2.278 1.897 1.709 1.519
conversion factors
Convert From Length foot (ft) inch (in) inch (in) meter (m) meter (m) centimeter (cm) millimeter (mm) Area square foot (ft) square meter (m) Convert To meter (m) meter (m) centimeter (cm) foot (ft) inch (in) inch (in) inch (in) Multiply By 0.3048 0.0254 2.5400 3.2808 39.3700 0.3937 0.0393
0.0929 10.7639
Circle radius diameter diameter radius Weight pound (lb) kilogram (kg)
0.4536 2.2046
All designs, specifications and availabilities of products and services presented in this bulletin are subject to change without notice. Bulletin BR-101198-EN (1/07) 2007 Andrew Corporation, Westchester, IL 60154 USA