Anda di halaman 1dari 19

Functional Chemicals Division

Product Range
Crop Protection
Edition 2008

Auxiliaries for Crop Protection Formulations


Product range anionic emulsifiers

Introduction
emulsifiers

Alkylbenzene sulfonates
adjuvants

24

Fatty alcohol ethoxylates Special emulsifiers Tristyrylphenol (TSP) ethoxylates Castor oil ethoxylates EO/PO block copolymers EO/PO alkoxylation products Nonylphenol ethoxylates Tributylphenol ethoxylates
disPersing agents

6 10 10 12 12 14 16 18

Amine ethoxylates Special adjuvants


blends

26 28

Emulsifier blends Performance blends Clariant matched pairs


other Products

30 30 30

Anionic condensation products Other dispersing agents Tristyrylphenol (TSP) ethoxylates, phosphated

20 20 22

Sulfosuccinates Solvents, crystallization inhibitors Glymes glycol diethers Polyethylene glycols

32 32 34 34

introduction
clariant is a market leader in formulation inerts, serving the agrochemical industry for several decades. our goal is to make agrochemical formulations more efficient and safe for the mutual benefit of manufacturers, consumers and the environment. We are continuously expanding our product range with new surfactants, focusing on safe and sustainable chemistry. clariant offers a complete range of additives for each formulation type and problem. this comprehensive brochure gives an overview of the various products by function. the following table shows the different product groups and their main applications by formulation type.

the aim of this publication is to support our customers in selecting the most suitable clariant product for their formulation needs. it contains the basic information, brand name, composition, active substance content, appearance, hlb value, basic specification, important physical data, and registration information. this information is not intended to replace technical data sheets or safety data sheets.

sYstematic overvieW of the most imPortant Product grouPs and their trade names

ProDuCt rANgE
Description Page

ProDuCt grouP
EC SC SE EW ME OD SL WG, SP WG, WP genapol C genapol LA genapol o genapol oX genapol t genapol uD
EC = Emulsifiable concentrate

Coconut fatty alcohol ethoxylates Lauryl fatty alcohol ethoxylates Oleyl alcohol ethoxylates Alcohol ethoxylates based on C12/C15 oxo alcohol C16/C18 fatty alcohol ethoxylates Alcohol ethoxylates based on C11 oxo alcohol Iso-tridecyl alcohol ethoxylates Iso-tridecyl alcohol ethoxylates methyl ethers Tristyryl phenol ethoxylates Castor oil ethoxylates EO/PO block copolymers Alcohol alkoxylates Nonylphenol ethoxylates Tri-sec.-butylphenol ethoxylates Dispersing agents of different types Anionic emulsifiers (Ca alkylbenzene sulfonates) Coconut fatty amine ethoxylates Oleyl amine ethoxylates Tallow amine ethoxylates Adjuvants and bio-enhancers Fatty acid dimethylamides

6 6 6 6 8 8 8 10 10 12 12 14 16 18 20 / 22 24 26 26 26 28 32

Fatty alcohol ethoxylates tristyrylphenol ethoxylates Castor oil ethoxylates Eo/Po block copolymers Eo/Po alcohol alkoxylates Nonylphenol ethoxylates tributylphenol ethoxylates Dispersing agents tSP ethoxylates, phosphated Alkylbenzene sulfonates Fatty amine ethoxylates Nonionic / anionic blends Sulfosuccinates Solvents / Crystallization inhibitors

genapol X genapol XM Emulsogen tS Emulsogen EL genapol PF, ED genapol EP


SC = Suspension concentrate SE = Suspo-emulsion EW = Emulsion (oil-in-water) ME = Microemulsion OD = Oil dispersion SL = Soluble concentrate WG, SP = Water-soluble granules, powder WG, WP = Water-dispersible granules, powder

Arkopal N Sapogenat t Dispersogen Phenylsulfonat, Calsogen genamin C genamin o genamin t Synergen genagen

Nonylphenol / nonylphenol ethoxylate Directive 2003/53/EC in general all products mentioned in the brochure are free of nonylphenols and nonylphenol ethoxylates. exceptions are marked as nPe-containing in the comments column and their use is restricted according to directive 2003/53/ec effective from 17th january 2005. see also: http://eur-lex.europa.eu/pri/en/oj/dat/2003/l_178/l_17820030717en00240027.pdf
NPE = nonylphenol ethoxylate, APE = alkylphenol ethoxylate

rEACH according to regulation (ec) no. 1907/2006 (reach), the manufacture or import of chemical substances in volumes exceeding 1 ton per year must be registered at the european chemicals agency (echa) in helsinki. reach registration is related to substances and not products, e.g. preparations/formulations of substances. Production, import and marketing of a reach-substance will be restricted to those uses evaluated in its registration dossier. the reach process starts with preregistration (1st june 2008 until 1st december 2008), which ensures the availability of preregistered substances to the registration date. the date of registration depends on the production volume of the substance and lies between 2010 and 2018. We confirm that we will, pursuant to reach requirements, pre-register all substances manufactured by clariant functional chemicals division in the eu or imported in the eu, that are relevant for the products listed in this brochure. however, no guarantee can be given that clariant will offer all listed products in the future, particularly over the 11 year phase of the reach implementation. if reach registration requirements lead to unacceptable costs, clariant will contact its customers to find an appropriate solution.

genapol, emulsogen, arkopal, sapogenat, dispersogen, calsogen, genamin, synergen, genagen are registered trademarks of clariant.

in this brochure a selection of clariants most important alkoxylates for crop Protection applications is shown. other types which are not mentioned here may be available locally or on request as well as aqueous emulsifier solutions of certain products (typically 80% or 90% active content) with improved handling properties.

emulsifiers

FAttY ALCoHoL EtHoXYLAtES


Composition Active cont. (%); Appearance 100; liquid 100; liquid 100; pasty, wax-like 100; pasty 100; pasty, wax-like 100; pasty, wax-like Cloud Point (C) ca. 73,0 ca. 50,5 ca. 90,5 ca. 67,0 ca. 77,0 ca. 60,0 mPas (50C) ca. 54,0 ca. 65,0 ca. 57,0 ca. 64,0 ca. 86,0 ca. 48,5 mg KOH/g ca. 68,5 ca. 80,5 ca. 50,0 ca. 58,0 ca. 72,0 ca. 75,0 ca. 64,0 ca. 73,0 ca. 77,0 ca. 63,5
A: 1% a.i. in water B: 5g / 25g / 25% BDG C: 1g / 100ml / 10% NaCl

Method B

HLB (calc.) 10 12 14

EPA *

Comments

genapol C 050 genapol C 070 genapol C 100 genapol C 120 genapol C 200 genapol C 250

Coconut fatty alcohol polyglycol ether with 5 EO Coconut fatty alcohol polyglycol ether with 7 EO Coconut fatty alcohol polyglycol ether with 10 EO Coconut fatty alcohol polyglycol ether with 12 EO Coconut fatty alcohol polyglycol ether with 20 EO Coconut fatty alcohol polyglycol ether with 25 EO

910, 930 910, 930 910, 930 910, 930 910, 930 910, 930

Genapol C 100 also shows adjuvant properties and enhances cuticular penetration (for details see Pesticide Formulations and Application Systems: 20th volume, ASTM STP 1400).

14,5 16,5 17

Product specified by viscosity.

genapol LA 030 genapol LA 040 genapol LA 070 genapol LA 080 genapol LA 100 genapol LA 230

C12/14 fatty alcohol polyglycol ether with 3 EO C12/14 fatty alcohol polyglycol ether with 4 EO C12/14 fatty alcohol polyglycol ether with 7 EO C12/14 fatty alcohol polyglycol ether with 8 EO C12/14 fatty alcohol polyglycol ether with 10 EO C12/14 fatty alcohol polyglycol ether with 23 EO

100; liquid 100; liquid 100; liquid 100; liquid 100; pasty 100; waxy solid

8 9 12 13 14 17

910, 930 910, 930 910, 930 910, 930 910, 930 910, 930 Product specified by OH number.

genapol o 050 genapol o 080 genapol o 100 genapol o 120 genapol o 150 genapol o 200 genapol oX 050 genapol oX 070 genapol oX 080 genapol oX 100

Oleyl alcohol polyglycol ether with 5 EO Oleyl alcohol polyglycol ether with 8 EO Oleyl alcohol polyglycol ether with 10 EO Oleyl alcohol polyglycol ether with 12 EO Oleyl alcohol polyglycol ether with 15 EO Oleyl alcohol polyglycol ether with 20 EO C12/C15 oxo alcohol polyglycol ether with 5 EO C12/C15 oxo alcohol polyglycol ether with 7 EO C12/C15 oxo alcohol polyglycol ether with 8 EO C12/C15 oxo alcohol polyglycol ether with 10 EO

100; liquid 100; liquid-pasty 100; pasty, wax-like 100; pasty 100; wax-like 100; wax-like 100; liquid 100; liquid-pasty 100; liquid-pasty 100; pasty

9 11 12 13 14 15,5 10 12 13 14

910, 930 910, 930 910, 930 910, 930 910, 930 910, 930 910, 930 910, 930 910, 930 910, 930
* EPA: Exempted from tolerance under EPA regulation 40 CFR 180.xxx

FAttY ALCoHoL EtHoXYLAtES


Composition Active cont. (%); Appearance 100; powder Cloud Point (C) ca. 60,0 mPas (70C) ca. 105,0 mPas (70C) ca. 60,0 ca. 68,0 ca. 53,5 ca. 53,5 ca. 63,5 ca. 63,5 ca. 40,0 ca. 60,5 ca. 65,5 ca. 75,5 ca. 63,5 ca. 83,0 ca. 70,0
A: 1% a.i. in water B: 5g / 25g / 25% BDG C: 1g / 100ml / 10% NaCl

Method B

HLB (calc.) 16

EPA *

Comments

genapol t 250 Powder

C16/C18 fatty alcohol polyglycol ether with 25 EO

910, 930

Product specified by viscosity.

emulsifiers

genapol t 500 Powder genapol t 800 Powder genapol uD 050 genapol uD 070 genapol uD 079 genapol uD 080 genapol uD 110 genapol X 030 genapol X 050 genapol X 060 genapol X 080 genapol X 090 genapol X 100 genapol X 150

C16/C18 fatty alcohol polyglycol ether with 50 EO C16/C18 fatty alcohol polyglycol ether with 80 EO C11 oxo alcohol polyglycol ether with 5 EO C11 oxo alcohol polyglycol ether with 7 EO C11 oxo alcohol polyglycol ether with 7 EO C11 oxo alcohol polyglycol ether with 8 EO C11 oxo alcohol polyglycol ether with 11 EO Iso-tridecyl alcohol polyglycol ether with 3 EO Iso-tridecyl alcohol polyglycol ether with 5 EO Iso-tridecyl alcohol polyglycol ether with 6 EO Iso-tridecyl alcohol polyglycol ether with 8 EO Iso-tridecyl alcohol polyglycol ether with 9 EO Iso-tridecyl alcohol polyglycol ether with 10 EO Iso-tridecyl alcohol polyglycol ether with 15 EO

100; powder 100; powder 100; liquid 100; liquid 90; liquid 100; liquid 100; pasty 100; liquid 100; liquid 100; liquid 100; liquid 100; liquid 100; liquid 100; wax-like

18 19 11 13 13 13 15 7 10 11 13 13 14 15

910, 930 910, 930 910, 930 910, 930 910, 930 910, 930 910, 930 910, 930 910, 930 910, 930 910, 930 910, 930 910, 930 910, 930
* EPA: Exempted from tolerance under EPA regulation 40 CFR 180.xxx

Product specified by dropping point.

Besides their high emulsifying performance, the iso-tridecanol based Genapol X types are also excellent wetting agents.

FAttY ALKoHoL EtHoXYLAtES


Composition Active cont. (%); Appearance ca. 100; liquid ca. 100; liquid ca. 100; liquid Cloud Point (C) ca. 70,5 ca. 67,0 ca. 86,0 A Method B C HLB (calc.) 9 9 11 EPA * Comments

Emulsogen LP Emulsogen M Emulsogen MC

Oleyl alcohol polyglycol ether Oleyl alcohol polyglycol ether Oleyl alcohol polyglycol ether

910, 930 910, 930 910, 930

Emulsogen LP and Emulsogen M are preferred emulsifiers for mineral oils. Both are characterized by a low pour point (ca. 0C) and remain homogeneous down to ca. 12C. Emulsogen MC is mainly used as an emulsifier for vegetable oils and leads to improved low temperature stability of the formulation.

A: 1% a.i. in water B: 5g / 25g / 25% BDG C: 1g / 100ml / 10% NaCl

EPA: Exempted from tolerance under EPA regulation 40 CFR 180.xxx

emulsifiers

SPECIAL EMuLSIFIErS
Composition Active cont. (%); Appearance 100; liquid 100; wax-like OH number (mg KOH/g) max. 11 HLB (calc.) 11 EPA * Comments

genapol XM 060

Iso-tridecyl alcohol ethoxylate methyl ether with 6 EO

not r.

Methylation of iso-tridecanol ethoxylates leads to the Genapol XM types which combine emulsifying as well as wetting power and chemical inertness, e.g. for hydrolytically sensitive active ingredients.

genapol XM 150

Iso-tridecyl alcohol ethoxylate methyl ether with 15 EO

max. 7

15

not r.

* EPA: Exempted from tolerance under EPA regulation 40 CFR 180.xxx

tSP-EtHoXYLAtES
Composition Active cont. (%); Appearance 100; liquid 100; liquid 100; liquid-pasty 100; wax-like 100; wax-like 100; wax 100; wax Cloud Point (C) ca. 67,0 A Method B C HLB (calc.) 10 EPA * Comments

Emulsogen tS 100

2,4,6-Tri(1-phenylethyl)-phenol polyglycol ether with 10 EO 2,4,6-Tri(1-phenylethyl)-phenol polyglycol ether with 16 EO 2,4,6-Tri(1-phenylethyl)-phenol polyglycol ether with 20 EO 2,4,6-Tri(1-phenylethyl)-phenol polyglycol ether with 29 EO 2,4,6-Tri(1-phenylethyl)-phenol polyglycol ether with 40 EO 2,4,6-Tri(1-phenylethyl)-phenol polyglycol ether with 54 EO 2,4,6-Tri(1-phenylethyl)-phenol polyglycol ether with 60 EO

920

Emulsogen tS 160

ca. 60,0

13

920

Emulsogen tS 200

ca. 57,5

13,5

920

Emulsogen tS 290

ca. 68,0

15

920

Emulsogen tS 400

ca. 71,0

17

920

Emulsogen tS 540

ca. 73,0

17

920

Emulsogen tS 600

ca. 19 mg KOH/g
A: 1% a.i. in water B: 5g / 25g / 25% BDG C: 1g / 100ml / 10% NaCl

17,5

920

Product specified by OH number.

* EPA: Exempted from tolerance under EPA regulation 40 CFR 180.xxx

10

11

CAStor oIL EtHoXYLAtES


Composition Active cont. (%); Appearance 100; liquid 100; liquid 100; liquid 100; pasty 100; pasty Saponification number (mg KOH/g) 87,0 97,0 Cloud point ca. 72,5C (1% in 20% acetic acid) 64,0 69,0 60,0 64,0 49,0 53,0 HLB (calc.) 10,5 12,5 13,5 14 15 EPA *

Emulsogen EL 200

Castor oil ethoxylate with 20 EO Castor oil ethoxylate with 30 EO Castor oil ethoxylate with 36 EO Castor oil ethoxylate with 40 EO Castor oil ethoxylate with 54 EO

960 960 960 960 960


* EPA: Exempted from tolerance under EPA regulation 40 CFR 180.xxx

emulsifiers

Emulsogen EL 300 Emulsogen EL 360 Emulsogen EL 400 Emulsogen EL 540

Eo / Po BLoCK CoPoLYMErS
Composition Active cont. (%); Appearance 100; pasty 100; wax-like 100; wax-like Cloud Point (C) ca. 72,9 ca. 69,0 ca. 775 mPas (70C)* ca. 35,4 ca. 56,8 ca. 67,8 A Method B C HLB (calc.) 6 17,5 17,5 EPA* Comments

Emulsogen V 1816 Emulsogen 4084 genapol V 5008

EO/PO block copolymer EO/PO block copolymer EO/PO/EO block polymer

960 960 960

genapol PF 10 genapol PF 20 genapol PF 40

Block copolymer of EO/PO containing 10% EO Block copolymer of EO/PO containing 20% EO Block copolymer of EO/PO containing 40% EO

100; liquid 100; liquid 100; liquid

13,5 14 16

960 960 960

Low molecular weight EO/POs typically have a molecular weight below 1000 g/mol. These surfactant molecules are small and flexible and can quickly adhere to newly formed surfaces. Medium molecular weight EO/POs typically cover molecular weights from about 1000 3000 g/mol. As a consequence of the increased molecular weight, these products tend to exhibit higher viscosity and/or waxier consistency. Their main application fields are as emulsifiers and dispersants in EC and SC formulations. High molecular weight EO/ POs have molecular weights typically above 3000 g/mol and are mostly waxy, only a few being liquid. They are used as co-emulsifiers or dispersants in EC or SC formulations.

genapol PF 80 Powder

Block copolymer of EO/PO containing 80% EO

100; powder

ca. 1200 mPas (70C)* ca. 1200 mPas (70C)* ca. 1200 mPas (70C)* ca. 73,0 (10% a.m. in water) ca. 53,6 ca. 28,6
A: 1% a.i. in water B: 5g / 25g / 25% BDG C: 1g / 100ml / 10% NaCl

19

960

genapol PF 80

Block copolymer of EO/PO containing 80% EO

100; wax-like

19

960

genapol PF 80 FP

Block copolymer of EO/PO containing 80% EO

100; powder

19

960

Genapol PF 80 FP is a finely powdered version of Genapol PF 80.

genapol ED 1616

Ethylene diamine EO/PO block copolymer

100; liquid

16

960

genapol ED 3030 genapol ED 3060

Ethylene diamine EO/PO block copolymer Ethylene diamine EO/PO block copolymer

100; viscous liquid 100; viscous liquid

16 15

960 960
* EPA: Exempted from tolerance under EPA regulation 40 CFR 180.xxx * Product specified by viscosity.

12

13

emulsifiers

Eo / Po ALKoXYLAtIoN ProDuCtS
Composition Active cont. (%); Appearance 100; wax-like 100; wax-like 100; liquid 100; liquid 100; viscous liquid 100; viscous liquid 100; viscous liquid 100; liquid 100; liquid 100; liquid 100; liquid 100; liquid 100; liquid 100; liquid 100; liquid 100; liquid Cloud Point (C) ca. 67,0 ca. 85,0 ca. 73,5 ca. 29,0 ca. 72,5 ca. 72,5 ca. 72,5 ca. 36,5 ca. 51,0 ca. 59,0 ca. 26,0 ca. 44,0 ca. 32,0 ca. 40,0 ca. 30,0 ca. 40,5
A: 1% a.i. in water B: 5g / 25g / 25% BDG C: 1g / 100ml / 10% NaCl

Method B

HLB (calc.) 11 11 16,5 14 16 16 15,5 11 12,5 13,5 9 12 10 10,5 11 12

EPA*

Comments

Emulsogen V 2436 Emulsogen 3510 Emulsogen EP 4901 genapol EP 4103 Emulsogen NPA 200 Emulsogen ItA 200 Emulsogen tBA 200 genapol EP 0244 genapol EP 0858 genapol EP 1182 genapol EP 2424 genapol EP 2464 genapol EP 2544 genapol EP 2552 genapol EP 2564 genapol EP 2584

Fatty alcohol alkoxylate n-Butanol alkoxylate n-Butanol alkoxylate n-Butanol alkoxylate Nonylphenol alkoxylate Iso-tridecyl alcohol alkoxylate Tributylphenol alkoxylate Fatty alcohol alkoxylate Fatty alcohol alkoxylate Fatty alcohol alkoxylate Fatty alcohol alkoxylate Fatty alcohol alkoxylate Fatty alcohol alkoxylate Fatty alcohol alkoxylate Fatty alcohol alkoxylate Fatty alcohol alkoxylate

not reg. 960 960 960 not reg. 960 not reg. not reg. not reg. 910 not reg. 910, 930 920 not reg. 920 920
* EPA: Exempted from tolerance under EPA regulation 40 CFR 180.xxx

Emulsogen EP 4901 is a liquefied alternative to Emulsogen 3510 for easier handling.

NPE-containing. Emulsogen ITA 200 is an APE-free alternative to Emulsogen NPA 200 and Emulsogen TBA 200.

Genapol EP 1182 exhibits excellent spreading/wetting properties and a very good cold water solubility.

14

15

emulsifiers

NoNYLPHENoL EtHoXYLAtES
Composition Active cont. (%); Appearance 100; liquid 100; liquid 100; liquid 100; liquid 100; liquid 100; liquid 100; liquid 100; liquid-pasty 100; pasty 100; pasty 100; pasty Cloud Point (C) ca. 37,0 A Method B C HLB (calc.) 9 EPA* NPEcontaining Comments

Arkopal N 040

Nonylphenol polyglycol ether with 4 EO

910 930

Arkopal N 060

Nonylphenol polyglycol ether with 6 EO

ca. 62,0

11

910 930

Arkopal N 080

Nonylphenol polyglycol ether with 8 EO

ca. 33,0

12,5

910 930

Arkopal N 090

Nonylphenol polyglycol ether with 9 EO

ca. 53,0

13

910 930

Arkopal N 100

Nonylphenol polyglycol ether with 10 EO

ca. 63,5

13,5

910 930

NPE replacements: As substitutes for Arkopal N 090 and N 100 we recommend ethoxylates based on synthetic alcohols, e.g. Genapol OX 070, 080, 100 Genapol UD 070, 080 Genapol X 080.

Arkopal N 110

Nonylphenol polyglycol ether with 11 EO

ca. 72,5

14

910 930

Arkopal N 130

Nonylphenol polyglycol ether with 13 EO

ca. 84,5

15

910 930

Arkopal N 150

Nonylphenol polyglycol ether with 15 EO

ca. 62,0

15,5

930

Arkopal N 200

Nonylphenol polyglycol ether with 20 EO

ca. 71,5

16,5

not reg.

Arkopal N 230

Nonylphenol polyglycol ether with 23 EO

ca. 74,0

17,0

not reg.

Arkopal N 300

Nonylphenol polyglycol ether with 30 EO

ca. 76,5

18

910 930

A: 1% a.i. in water B: 5g / 25g / 25% BDG C: 1g / 100ml / 10% NaCl

* EPA: Exempted from tolerance under EPA regulation 40 CFR 180.xxx

16

17

emulsifiers

trIButYLPHENoL EtHoXYLAtES
Composition Active cont. (%); Appearance 100; liquid 100; liquid 100; liquid 100; liquid 100; liquid-pasty 100; wax-like 100; wax-like 100; wax-like Cloud Point (C) ca. 27,5 A Method B C HLB (calc.) 8 EPA* Comments

Sapogenat t 040

Tri-sec-butylphenol polyglycol ether with 4 EO

not reg.

Sapogenat t 060

Tri-sec-butylphenol polyglycol ether with 6 EO

ca. 54,7

10

not reg.

Sapogenat t 080

Tri-sec-butylphenol polyglycol ether with 8 EO

ca. 67,0

11

not reg.

4-Nonylphenol ethoxylates (NPEs) and 4-Octylphenol ethoxylates (OPEs) as well as the underlying phenols are listed in the EU SEC (2004) Document as substances with evidence of endocrinedisrupting effects (Category 1) whereas 2,4,6-Tri-sec.-butylphenol as well as its ethoxylated derivatives (Sapogenat T types) are not listed. Based on the structural elements of known endocrine disrupters (EDs), it is likely that the endocrine-disrupting effect of alkylphenols and derived ethoxylates is associated with - a para-substituted alkyl group on the aromatic ring with at least 3 carbon atoms - no polyalkylation on the aromatic ring Supporting evidence was obtained using three different in vitro receptor binding tests with Sapogenat T 130 and 2,4,6-Tri-sec.- butylphenol in which both molecules did NOT show endocrine- disrupting effects in any of these tests. In these test models the known EDs estradiol and 4-Octylphenol clearly showed endocrine-disrupting effects demonstrating the suitability of the test models. Based on available scientific facts published in literature as well as on the results from 3 different in vitro tests it can be concluded in a weight of evidence approach that it is unlikely that 2,4,6-Tri-sec.-butylphenol and the ethoxylated derivatives (Sapogenat T types) exhibit endocrine-disrupting effects.

Sapogenat t 110

Tri-sec-butylphenol polyglycol ether with 11 EO

ca. 43,0

13

not reg.

Sapogenat t 130

Tri-sec-butylphenol polyglycol ether with 13 EO

ca. 63,0

14

not reg.

Sapogenat t 180

Tri-sec-butylphenol polyglycol ether with 18 EO

ca. 62,5

15

not reg.

Sapogenat t 300

Tri-sec-butylphenol polyglycol ether with 30 EO

ca.70 mPas (70C)* ca. 140 mPas (70C)*

17

not reg.

Sapogenat t 500

Tri-sec-butylphenol polyglycol ether with 50 EO

18

not reg.

A: 1% a.i. in water B: 5g / 25g / 25% BDG C: 1g / 100ml / 10% NaCl

* EPA: Exempted from tolerance under EPA regulation 40 CFR 180.xxx * Product specified by viscosity.

18

19

disPersing agents

ANIoNIC CoNDENSAtIoN ProDuCtS


Composition Active cont. (%); Appearance ca. 80; powder ca. 35; liquid ca. 35; liquid ca. 62; powder Type Water solubility EPA* Comments

Dispersogen 1494

Sodium salt of a cresol-formaldehyde condensation product Sodium salt of a cresol-formaldehyde condensation product Sodium salt of a cresol-formaldehyde condensation product Combination of anionic surfactants mixed with a carrier

anionic

yes

not reg.

Dispersogen 1494 liq.

anionic

yes

not reg.

rapidaminreserve CL

anionic

yes

not reg.

Dispersogen SI

anionic

no

910, (920), 930

* EPA: Exempted from tolerance under EPA regulation 40 CFR 180.xxx

otHEr DISPErSINg AgENtS


Composition Active cont. (%); Appearance ca. 60-65; powder ca. 100; pasty ca. 80; liquid ca. 70; liquid ca. 100; powder ca. 97; wax Type Water solubility EPA* Comments

Hostapon tPHC

Fatty acid methyl tauride sodium salt

anionic

yes

910, 930, (950)

All products displayed under Other dispersing agents are APE-free. Clariant has recently extended its range of dispersing agents for agro formulations with new and environmentally friendly products. These dispersing agents are polymers and are available as highly concentrated products.

Dispersogen PSL 100

Polyacrylate graft copolymer

non-ionic

yes

not reg.

Dispersogen 4387

Anionic polymeric ester

anionic

yes

not reg.

Dispersogen S-r

Nonionic polyester

non-ionic

yes

not reg.

Dispersogen S-rA

Anionic modified polyester

anionic

yes

not reg.

Dispersing Agent 3618

Phosphate ester of EO-PO-EO blockpolymer

anionic

yes

920, 960

* EPA: Exempted from tolerance under EPA regulation 40 CFR 180.xxx

20

21

disPersing agents

tSP-EtHoXYLAtES, PHoSPHAtED
Composition Active cont. (%); Appearance ca. 97; liquid ca. 96; viscous liquid ca. 60; viscous liquid ca. 97,5; viscous liquid ca. 97,5; viscous liquid ca. 60; liquid ca. 85; viscous liquid Type Water solubility EPA* Comments

Dispersogen LFH

2,4,6-Tri-(1-phenylethyl)-phenol polyglycol ether phosphoric acid ester 2,4,6-Tri-(1-phenylethyl)-phenol polyglycol ether phosphoric acid ester triethanolamine salt 2,4,6-Tri-(1-phenylethyl)-phenol polyglycol ether phosphoric acid ester ammonium salt 2,4,6-Tri-(1-phenylethyl)-phenol polyglycol ether phosphoric acid ester 2,4,6-Tri-(1-phenylethyl)-phenol polyglycol ether phosphoric acid ester triethanolamine salt 2,4,6-Tri-(1-phenylethyl)-phenol polyglycol ether phosphoric acid ester triethanolamine salt 2,4,6-Tri-(1-phenylethyl)-phenol polyglycol ether phosphoric acid ester ammonium salt

anionic

yes

920

Dispersogen LFS

anionic

yes

not reg.

Dispersogen LFA *

anionic

yes

920

Phosphated TSP ethoxylates are anionic emulsifiers and dispersing agents. Dispersogen TP and LF types differ in their degree of ethoxylation (TP: 16 moles EO, LF: 20 moles EO) and their mono-/diester ratio. The LF types are stand-alone products that offer better electrolyte stability compared to the TP types as well as higher dispersing power at low dispersion viscosity.

Dispersogen tP 160

anionic

yes

920

Dispersogen tP 160 t

anionic

yes

not reg.

Dispersogen tP 166 t *

anionic

yes

not reg.

Dispersogen tP 169 A *

anionic

yes

920

* Development product; samples available

* EPA: Exempted from tolerance under EPA regulation 40 CFR 180.xxx

22

23

ALKYLBENzENE SuLFoNAtES
Composition Solvent Type Active content (%); Appearance ca. 70; viscous liquid ca. 62; viscous liquid ca. 70; viscous liquid ca. 40+10; liquid ca. 40+10; liquid ca. 40+10; liquid ca. 40+10; liquid ca. 50+7; liquid ca. 58; viscous liquid ca. 58; viscous liquid Flash point (C) 33C EPA* Water content K.F. (%) max. 0,5 Comments

Phenylsulfonat CA

iso-C12 alkyl benzene sulfonate calcium salt

Isobutanol

branched

910, (920), 930 910, (920), 930 910, (920), 930 910, 930

anionic emulsifiers alkYlbenzene sulfonates

The ND types (Naphthalene Depleted) are alkylbenzene sulfonates in a solvent with a low content of naphthalene (max. 0,9 %).

Phenylsulfonat CA 62

iso-C12 alkyl benzene sulfonate calcium salt

Isobutanol

branched

33C

max. 0,5

Phenylsulfonat CAL

n-C12 alkyl benzene sulfonate calcium salt

Isobutanol

linear

33C

max. 0,5

Calsogen Ar 100

iso-C12 alkyl benzene sulfonate calcium salt

Solvesso 200

branched

> 100C

max. 0,5

Calsogen Ar 100 ND

iso-C12 alkyl benzene sulfonate calcium salt

Solvesso 200 ND

branched

> 100C

910, 930

max. 0,5

Calsogen Ar 62 ND

iso-C12 alkyl benzene sulfonate calcium salt

Solvesso 150

branched

ca. 62C

910, 930

max. 0,5

Calsogen ArL 100 ND

n-C12 alkyl benzene sulfonate calcium salt

Solvesso 200 ND

linear

> 100C

910, 930

max. 0,5

Calsogen ArL 48

n-C12 alkyl benzene sulfonate calcium salt

Solvesso 100

linear

ca. 48C

910, 930

max. 0,5

Calsogen EH

iso-C12 alkyl benzene sulfonate calcium salt

2-Ethylhexanol

branched

> 60C

910, (920), 930 910, (920), 930

max. 0,5

Calsogen 4814

n-C12 alkyl benzene sulfonate calcium salt

2-Ethylhexanol

linear

> 60C

max. 0,5

Solvesso is a registered trademark of Exxon.

* EPA: Exempted from tolerance under EPA regulation 40 CFR 180.xxx

24

25

AMINE EtHoXYLAtES
Composition Appearance Alkaline number (mg KOH/g) 190 205 EPA* Comments

genamin C 020

Cocos fatty amine ethoxylate with 2 EO

liquid

920

Clariant offers a broad range of fatty amine ethoxylates based on different fatty amines and with different degrees of ethoxylation. For amine ethoxylates containing a solubilizer, refer to Special Adjuvants.

genamin C 050

Cocos fatty amine ethoxylate with 5 EO

liquid

129 137

920

genamin C 100

Cocos fatty amine ethoxylate with 10 EO

liquid

85 89

920

genamin C 150

Cocos fatty amine ethoxylate with 15 EO

liquid

63 67

920

adjuvants

genamin C 200

Cocos fatty amine ethoxylate with 20 EO

liquid

50 53

920

genamin o 050

Oleyl amine ethoxylate with 5 EO

liquid

111 117

920

genamin o 200

Oleyl amine ethoxylate with 20 EO

liquid

47 57

920

genamin t 050

Tallow fatty amine ethoxylate with 5 EO

liquid

110 118

920

genamin t 100

Tallow fatty amine ethoxylate with 10 EO

liquid

77 81

920

genamin t 150

Tallow fatty amine ethoxylate with 15 EO

liquid

60 61

920

genamin t 200

Tallow fatty amine ethoxylate with 20 EO

liquid

47 50

920

genamin t 250

Tallow fatty amine ethoxylate with 25 EO

pasty, wax-like

39 42

920

* EPA: Exempted from tolerance under EPA regulation 40 CFR 180.xxx

26

27

SPECIAL ADJuVANtS
Composition Appearance EPA* Application Comments

genamin 267

Amine ethoxylate containing a solubilizer

liquid

910, 920, 930 910, 920, 930 910, 930

Formulated adjuvant for Glyphosate SL formulations, easily dissolves in water without gelation. Formulated adjuvant for Glyphosate SL formulations.

genamin 700

Amine ethoxylate containing a solubilizer

liquid

Special Adjuvants are tailor-made products for dedicated types of active ingredients with a proven performance as bio-enhancers. Benefits are formulations with the highest efficacy, minimizing the usage level of pesticides saving costs and increasing environmental compatibility. Please enquire for additional information about our Special Adjuvants range or guide recipes.

Synergen gL 5

Copolymer of glycerol, esterified

viscous liquid

Proprietary polyglycerol-based adjuvant which is derived from natural starting materials, showing excellent performance with Glyphosate. Environmentally friendly; very favorable tox / ecotox properties, no hazard labeling required. Due to its structure, it also has excellent dispersing properties. Adjuvant for Glyphosate.

Synergen g2D

Aqueous solution of an amphoteric adjuvant

liquid

not reg.

Synergen 9903

Aqueous solution of an amphoteric adjuvant

liquid

not reg.

Adjuvant for Glyphosate.

Synergen HY

Aqueous solution of a quaternary ammonium salt Specialty silicone

liquid

not reg.

Adjuvant for Glyphosate.

Synergen SW-100

liquid

910

Silicone-based superwetter, enhances spreading and penetration. Suitable as tank-mix or in-can adjuvant. Proprietary polyglycerol-based adjuvant for bentazone with very favorable tox / ecotox properties, no hazard labeling required. For further information see our Newsletter on Bentazone. Proprietary polyglycerol-based adjuvant with increased hydrophobic character and very good dispersing properties. Suitable as tank-mix or in-can adjuvant. Efficient adjuvant blend for fungicides (e.g. Tebuconazole and Azoxystrobin). Proven performance as tank-mix or in-can adjuvant. Proprietary high performance adjuvant blend for Glyphosate highload formulations, efficient at low dosages. Suitable as tank-mix or in-can adjuvant. Proprietary adjuvant for Glyphosate solid formulations.

Synergen BB

Copolymer of glycerol, esterified

liquid

910, 930

adjuvants

Synergen IB 775

Copolymer of glycerol, esterified

liquid

910, 930

Synergen KN

Adjuvant blend

liquid

910, 920, 930

Synergen g-HL

Amine alkoxylates containing a solubilizer

liquid

not reg.

Synergen g-S

Amine alkoxylate

solid

not reg.

* EPA: Exempted from tolerance under EPA regulation 40 CFR 180.xxx

28

29

EMuLSIFIEr BLENDS
Description Active content (%); Appearance ca. 70,5; viscous liquid ca. 78,0; viscous liquid ca. 85; liquid EPA* APE-free Comments

Emulsogen IC

Blend of anionic and nonionic surfactants

blends

910, (920), 930 910, (920), 930 910, (920), 930, 960 910, (920), 930, 960 910, (920), 930 not reg. not reg.

Emulsogen ICL

Blend of anionic and nonionic surfactants

Emulsogen It

Blend of anionic and nonionic surfactants

Emulsogen ItL

Blend of anionic and nonionic surfactants

ca. 80; liquid

Emulsogen t

Blend of anionic and nonionic surfactants

ca. 100; liquid

Emulsogen T is an excellent emulsifier for natural oils.

Emulsogen PSI 100 Emulsogen PSI B

Blend of anionic and nonionic surfactants Blend of anionic and nonionic surfactants

ca. 100; liquid ca. 80; liquid

PErForMANCE BLENDS
Description Active content (%); Appearance ca. 90; liquid EPA* NPE-free Comments

Emulsogen B 350

Blend of anionic and nonionic surfactants in organic solvent for Endosulfan EC Blend of anionic and nonionic surfactants in organic solvent for Tebuconazole EC Blend of anionic and nonionic surfactants in organic solvent for Propiconazole EC Blend of anionic and nonionic surfactants in organic solvent for Methyl-Parathion Blend of anionic and nonionic surfactants for Paraquat

not reg.

Emulsogen tB 200

ca. 25; liquid

920

Clariants Performance Blends include everything which is needed for easy and successful formulation: A well balanced combination of emulsifiers and adjuvants. Performance Blends are available for specific formulations of major active ingredients. Please enquire for Performance Blends for additional formulations.

Emulsogen P 250

ca. 52; liquid

920

Emulsogen MPB Synergen PW

ca. 74; liquid ca. 46; liquid

910, (920), 930, 960 910 930

CLArIANt MAtCHED PAIrS


Description Active content (%); Appearance ca. 100; liquid EPA* APE-free Comments

Emulsogen MP 1

Blend of anionic and nonionic surfactants

910, (920), 930, 960 910, (920), 930, 960 910, (920), 930

Emulsogen MP 2

Blend of anionic and nonionic surfactants

ca. 100; liquid

The matched pairs emulsifiers are a versatile, APE-free system containing only a few components for multiple active ingredient solutions. Matched pairs are emulsifier blends with optimized performance. So numerous active ingredients can be formulated with only a few (up to three) blends, saving space and time. Guide recipes for formulations are available on request.

Emulsogen MP 3

Blend of anionic and nonionic surfactants

ca. 100; liquid

* EPA: Exempted from tolerance under EPA regulation 40 CFR 180.xxx

30

31

other Products

SuLFoSuCCINAtES
Composition Active content (%); Appearance ca. 50; liquid ca. 60; liquid ca. 64; liquid ca. 58; liquid EPA* Water content K.F. (% ) ca. 48,5 Flash point (C) > 100 Comments

Emulsogen SF 8

Aqueous solution of sodium dioctyl sulfosuccinate Sodium dioctyl sulfosuccinate in aromatic solvent, naphthalene-depleted Sodium dioctyl sulfosuccinate in aromatic solvent Sodium dioctyl sulfosuccinate in white oil

910, 930

Synergen W 02

910, 930

< 0,1

> 100

Dioctyl sulfosuccinates are versatile surfactants, having outstanding wetting power (fast wetters) and dispersing properties. The broad choice of different solvents makes it possible to find a grade which is suitable for many different formulation types. Synergen W 02 and W 03 are very suitable for hydrolytically unstable active ingredients due to their very low water content.

Synergen W 03

910, 930

< 0,1

ca. 63

Synergen W 09*

910, 930

< 0,1

> 100

* Development product; samples available

SoLVENtS, CrYStALLIzAtIoN INHIBItorS


Composition Active content (%); Appearance ca. 100; liquid ca. 100; liquid ca. 100; liquid EPA* Water content K.F. (% ) < 0,5 Comments

genagen 4166

Dimethylamide of C8/C10 fatty acid

920

Genagen types are versatile solvents, co-solvents and crystallization inhibitors.

genagen 4231

Dimethylamide of C8/C10 fatty acid

920

< 0,5

genagen 4296

Dimethylamide of C10 fatty acid

920

< 0,5

* EPA: Exempted from tolerance under EPA regulation 40 CFR 180.xxx

32

33

gLYMES gLYCoL DIEtHErS


Composition Active content (%) Water content K.F. (% ) max. 0,2 EPA* Flash point (C) 141 Kinematic viscosity at 20C (mm 2/s) 4,1 Water solubility at 20C (% w/w) 100 Comments

tetraglyme

Tetraethylene glycol dimethyl ether

> 99

not reg.

Glymes are versatile solvents with varying properties, depending on the degree of condensation and type of alkyl groups. Dipropylene glycol DME can also be used as an NMP replacement. All products selected here are non-toxic and require no hazard labeling. For more glymes and further information see also Clariants brochure Your functional fluid, Glymes Glycol Diethers.

Dipropylene glycol DME

Dipropylene glycol dimethyl ether

> 99

max. 0,05

not reg.

65

1,1

35

Polyglycol DME 500

Polyethylene glycol dimethyl ether

> 98

max. 0,3

not reg.

220

29

100

other Products

Butyldiglyme

Diethylene glycol dibutyl ether

> 99

max. 0,05

not reg.

120

2,4

0,3

Polyglycol BB 300

Polyethylene glycol dibutyl ether

> 99

max. 0,2

not reg.

151

45

PoLYEtHYLENE gLYCoLS
Composition Appearance Water content K.F. (%) max. 0,5 EPA* OH number (mg KOH/g) 356 394 Viscosity at 20C (mPas) 88 96 Comments

Polyglykol 300

Polyethylene glycol with MM 300, PEG-6

liquid

910, 930

Polyglykol 400

Polyethylene glycol with MM 400, PEG-8

liquid

max. 0,5

910, 930

267 295

112 124

Polyglykol 600

Polyethylene glycol with MM 600, PEG-12

wax

max. 0,5

910, 930

178 197

17 18 (50% in water) 24 28 (50% in water) 50 58 (50% in water) 114 142 (50% in water) 210 262 (50% in water)

Polyethylene glycols are used in agrochemical formulations as humectants, compatibilizers, and to increase low temperature stability. Additionally, certain PEGs also increase the bio-availability of active ingredients. For more polyethylene glycols and further information see also Clariants Polyalkylene / polyethylene glycols brochure.

Polyglykol 1000

Polyethylene glycol with MM 1000, PEG-20

wax / melt

max. 0,5

910, 930

107 118

Polyglykol 2000 S

Polyethylene glycol with MM 2000, PEG-40

flakes

max. 0,5

910, 930

51 62

Polyglykol 4000 S

Polyethylene glycol with MM 4000, PEG-90

flakes

max. 0,5

910, 930

25 30

Polyglykol 6000 S

Polyethylene glycol with MM 6000, PEG-150

flakes

max. 0,5

910, 930

17 20

* EPA: Exempted from tolerance under EPA regulation 40 CFR 180.xxx

34

35

Clariant International Ltd. Functional Chemicals Division marketing crop Protection 4132 muttenz switzerland Phone +41 61 46 977 67 fax +41 61 46 975 12 Clariant Produkte (Deutschland) gmbH functional chemicals division research & development crop Protection 65926 frankfurt am main germany Phone +49 69 305 80 234 fax +49 69 318 435 Internet or Email: http://www.clariant.com cropprotection @ clariant.com

trademark of clariant registered in numerous countries. 2008 clariant international ag, rothausstrasse 61, 4132 muttenz, switzerland

fuenfWerken.com

this information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. it should not therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application. any existing industrial property rights must be observed. the quality of our products is guaranteed under our general conditions of sale.

Anda mungkin juga menyukai