1. Test
OS Server Storage Centos 5.4 DataOntap 7.3.2 Lun size 1g software iSCSI initiator License iSCSI IP 220.117.55.226 220.117.55.225
3. IQN (server)
# iscsiadm -m discovery -t sendtargets -p 220.117.55.225 220.117.55.225:3260,1000 iqn.1992-08.com.netapp:sn.84203700 -> Storage IQN # more /etc/iscsi/initiatorname.iscsi InitiatorName=iqn.1994-05.com.redhat:5c4516d4863c -> Server IQN
5. Lun discover(server)
# service iscsi start # iscsiadm -m node -T iqn.1992-08.com.netapp:sn.84203700 -p 220.117.55.225 -l # iscsiadm -m session rescan
6. Lun format(server)
# fdisk -l # /opt/netapp/santools/sanlun lun show
[root@netapp ~]# /opt/netapp/santools/sanlun lun show controller: lun-pathname device filename adapter host2 protocol iSCSI lun size 1g (1073741824) lun state GOOD F270: /vol/iscsi/linux/lun.0 /dev/sdb
# fdisk /dev/sdb
[root@netapp santools]# fdisk /dev/sdb Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel Building a new DOS disklabel. Changes will remain in memory only, until you decide to write them. After that, of course, the previous content won't be recoverable. Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite) Command (m for help): p Disk /dev/sdb: 1073 MB, 1073741824 bytes 34 heads, 61 sectors/track, 1011 cylinders Units = cylinders of 2074 * 512 = 1061888 bytes Device Boot Start End Blocks Id System
Command (m for help): n Command action e p p Partition number (1-4): 1 First cylinder (1-1011, default 1): Using default value 1 Last cylinder or +size or +sizeM or +sizeK (1-1011, default 1011): Using default value 1011 Command (m for help): p Disk /dev/sdb: 1073 MB, 1073741824 bytes 34 heads, 61 sectors/track, 1011 cylinders Units = cylinders of 2074 * 512 = 1061888 bytes extended primary partition (1-4)
Start 1
End 1011
Blocks
Id System
1048376+ 83 Linux
Command (m for help): w The partition table has been altered! Calling ioctl() to re-read partition table. Syncing disks.
# mkfs.ext3 /dev/sdb1
[root@netapp ~]# mkfs.ext3 /dev/sdb1 mke2fs 1.39 (29-May-2006) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) 131072 inodes, 262094 blocks 13104 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=268435456 8 block groups 32768 blocks per group, 32768 fragments per group 16384 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376 Writing inode tables: done Creating journal (4096 blocks): done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 25 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override.
7. iscsi (server)
# chkconfig --add iscsi # chkconfig --list iscsi