Identification No.
Production weld
Identification of WPS followed Total Joint Thickness of test coupon (T) Base Metal 1 Thickness (t) Base Metal P- or S- Number Tube Sheet
Test Coupon
Specification and type/grade or UNS number of base metal(s) mm to Base Metal 2 Thickness (t) to P- or S- Number
N/A
mm To Base Metal 3 Thickness (t) Position (1G, 2G, 6G, 3F, etc.)
N/A
FORMTEXT N/A
Range qualified
Testing Conditions and Qualification Limits When Using Automatic or Machine Welding Equipment
Welding Variables (QW-361.2) Type of welding (machine) Welding process Total Joint Thickness (T) Type of laser for LBW (CO2, YAG, etc.) Automatic joint tracking Base Metal P No. Position Backing (with/without) Single or multiple passes per side Actual values
RESULTS
Visual Examination of Completed Weld (QW-194) Mechanical (Peel) Test (QW-197.2)
Sample # Visual Inspection Fracture location (Peel Test)# Results (Satisfactory / Unsatisfactory)
by
1 2 3
Fusion Zone Measurement (nearest .001)
4 5 6 Macro-Examination (QW-197.2)
Sample # 1 2 3 4 5 6 Penetration Measurement (nearest .001) Results (Satisfactory / Unsatisfactory)
Mechanical test evaluated by: Macro-Examination evaluated by: Welding supervised by: Equipment Used: Measuring Equipment Used:
We certify that the statements in this record are correct and that the test coupons were prepared, welded, and tested in accordance with the requirements of Section IX of the ASME Boiler and Pressure Vessel Code. Manufacturer or Contractor Date Certified By