COM
http://www.wifirobin.com/wifirobin-series-network-product
free wifi,hack a network wifirobin order C free wifi software downloads contact C wifi for dummies FAQ C how does wifi work whole sale C free wifi spots how to hack a wifi network for free wifirobin - free wifi,hack a network
2.4 GHz SUPER WIRELESS TERMINAL User manual V1.77 Part One:Product Description The complete packaging includes following:
1 of 13
31-12-2012 22:48
http://www.wifirobin.com/wifirobin-series-network-product
One 2.4GHz Super wireless terminal One USB line One warranty card Part Two:Product feature Meet IEEE802.11b/g standard, use OFDM technique, the actual data rate can be reached as high as 20Mbps or above Support 3G wireless router, wireless AP and wireless client server Support Bridge and Router mode LED screen, automatically search wireless signal , one key connecting. No installation of the driver and software are needed. Support 54/48/36/24/18/12/9/6M or 11/5.5/2/1M rate adaption Support SSID broadcast control and MAC visit address control Support 64/128/152 WEP encryption, support WPA.802.1X,TKIP,AES encryption and security mechanisms. Built-in firewall, support IP address filtering, domain filtering and MAC address filtering Support for UPNP and DDNS dynamic domain function
Device Address Default IP address: 192.168.4.20 User name: admin Password: admin. Part Three
LCD CONFIGURATION
INTERFACE
2 of 13
31-12-2012 22:48
http://www.wifirobin.com/wifirobin-series-network-product
Turn on the device, connect the antenna, network cable, then plug in, after the power indicator light, LAN light and AIR lighter are on, the ANTCOR welcome screen will be shown. SCREEN MENU After you press the button OK, the menu is displayed as follow,
Device information As to the device information, please take a look at the software version, IP address.
Wireless network information Display the signal strength for the wireless network connecting
Wireless network scan IVS Successful information displayed Press OK button, it will automatically scan the wireless signals around.
Above information stands for SSID, encryption method and signal strength For example, the fourth line, ant stands for SSID, OPN stands for encryption methods, 16 stands for signal strength. The results LV7AP
3 of 13
31-12-2012 22:48
http://www.wifirobin.com/wifirobin-series-network-product
Part FourRestore the factory settings Select the restoring factory settings, press OK to restore the factory default, the default address is 192.168.4.20, user name: admin, password: admin
Part Five WEB PAGE CONFIGURATION Local IP address setting Choose Network Neighborhood, local area connection properties/General/ Internet (TCP/IP), fill in the IP 192.168.4.XX, see picture below
4 of 13
31-12-2012 22:48
http://www.wifirobin.com/wifirobin-series-network-product
Login setting Open IE browser, input 192.168.4.20, click enter button, you will see a window, type the default user name: admin and password: admin, click sure key.
Wireless mode introduction 1. Link setup Wireless Mode: choose Station ESSID: click Selection button and choose Station 2. Wireless security setting Setting steps 1.Set up Main, follow the picture below.
5 of 13
31-12-2012 22:48
http://www.wifirobin.com/wifirobin-series-network-product
6 of 13
31-12-2012 22:48
http://www.wifirobin.com/wifirobin-series-network-product
Finish booting the device, wait to connect with the router, get your network. 4. Apply changes
5. Restarting:
7 of 13
31-12-2012 22:48
http://www.wifirobin.com/wifirobin-series-network-product
Finish booting the device, wait to connect with the router, get your network. WiFi access points appears SSID Robin: How to change Repeater ESSID You can change the default name of Repeater ESSID: WFB-XXXX to a name you want on the page Link Setup. This step prevents other people from using the network hacked by wifirobin. We take TENDA network as an example, the network which has been hacked was named WFB-TENDA as default Repeater ESSID but without initial key as the following image:
8 of 13
31-12-2012 22:48
http://www.wifirobin.com/wifirobin-series-network-product
Well, you must change the name WFB-TENDA to avoid the user of TENDA knowing that his/her network has been hacked. Besides, it is better to set keys by the following steps to keep others from using the hacked network: Rename Repeater ESSID(here we change it to Robin, you can change to the name you want), enter wpa keys (here we use wifirobin, you can select the keys you like)
9 of 13
31-12-2012 22:48
http://www.wifirobin.com/wifirobin-series-network-product
After clicking Change, appears at the top of the page, Configuration contains non-applied changes. Apply these changes? Click Apply.
Wait a minute, after wifirobin restarting, setting will be reserved successfully. Then in the list of
10 of 13
31-12-2012 22:48
http://www.wifirobin.com/wifirobin-series-network-product
2. Click
11 of 13
31-12-2012 22:48
http://www.wifirobin.com/wifirobin-series-network-product
3. Click Browse button, choose the file fw.bing that I sent you
[v1.25wifirobin]
12 of 13
31-12-2012 22:48
http://www.wifirobin.com/wifirobin-series-network-product
5. Click
6.Wait for a couple of minutes untill the device reboots, then succeed in upgrading. Pay attention to below two points 1 Do not change the file name fw.bin, leave as it is. 2 During the firmware upgrading, make sure wifirobin has power, dont cut the power supply and make sure to connect to the After rebooting the device, now do a simple operation on wifirobin LED screen, choose factory reset option, wait for some seconds, reboot it again. Upgrade succeeded. Resolved Question: why didnt my mcafee or windows defender find the security virus that charged me $51.00? Resolved Question: my wirless net wont work?
Package includes:
1 X WifiRobin Terminal 1X 5DBi Antenna 1XUSB Cable 1XInstructions Manual 1X network Cable buy free wifi to hack a network
13 of 13
31-12-2012 22:48