ACTUATORS
Ecology
Seal
Ecology Seal
Benefits and availability
ACT-2
NFPA
aluminum
and steel
cylinders
Series A and J
Rodlock Option
NEN NFPA
ACT-6
ACT-27
ACT-32
LS Series Thrusters
ACT-38
ACT-40
ACT-A
ACTUATORS
ACTUATORS
ACTUATORS
ACTUATORS
Series SS
actuators
NFPA
Interchangeable
Series N
actuators
NFPA
Interchangeable
ACT-46
ACT-50
Non-rotating
1-1/8" to 4" bores
250 psi
-20F to 200
ACT-56
Tiny Tim
Series
actuators
NFPA interchangeable
ACT-62
ACT-68
ACT-B
Rack &
Pinion
Rotary
Actuators
ISO/VDMA
Actuators
ACT-74
ACT-77
Guide blocks
32 to 100 mm bores
15 to 232 psi
32F to 176F
32 to 125 mm bores
15 to 232 psi
-4F to 176F
ACT-84
ACT-92
ACT-96
Internal Guide
External Guide
16 to 80 mm bores
14.5 to 116 psi
-22F to 176F
16 to 80 mm bores*
14.5 to 116 psi
-22F to 176F
25 to 63 mm bores
14.5 to 116 psi
-22F to 176F
ACT-102
ACT-110
ACT-114
ACT-100
LINTRA
PLUS
Rodless
cylinders
ACT-C
ACTUATORS
ACTUATORS
ACTUATORS
ACTUATORS
LINTRALite
Rodless
cylinders
25 to 40 mm bores
116 psi
-22F to 180F
ACT-128
Roundline
Plus
Stainless
steel body
actuators
Double acting
9/16" to 2" bores
125 psi
32F to 160F
ACT-134
ACT-148
ACT-152
ACT-156
F-Series
Plus
cylinders
ACT-160
ACT-168
ACT-D
Series
90000
Compact
Actuators
ACT-172
ACT-174
12 to 100 MM
Magnetically
operated
switches
ACT-178
ACT-E
ACTUATORS
ACTUATORS
ACTUATORS
Increased Productivity
Industry Conformance
Conforms to industry standard dimensions, does not add length
Available in Viton
Widely proven and desired throughout the industry
By eliminating the cushion needle, the Ecology Seal Cylinder saves us 1-1/2 hours set up per machine. - A leading packaging OEM
ACT-2
The air cushion starts the deceleration process. As the cylinder traverses
towards the end of stroke, the exhausting air is free flowing through an
unrestricted passage.
As the cushion spear enters the end cap, it blocks the free flowing path.
The exhausting air is then forced through a very small, controlled orifice.
As the cylinder continues towards the end of stroke, the volume of air
decreases, compressing the exhausing air. The exhausting air compresses
to a high level, providing the deceleration force to slow the cylinder. The
size of this controlled cushion orifice determines the rate of deceleration
generated by the air cushion.
As the cylinder approaches the final stroke, the Ecology seal comes in
contact with the end cap of the cylinder. The Ecology seal material is noncompressible, however, at full pressure, it is designed to move or deform in
shape to allow the cylinder to achieve full stroke. The force required to
deform this material is the final deceleration force used to bring the cylinder
to a nice, smooth stop.
The Ecology seal also acts as a spring to assist in a quick release out of
cushion as the cylinder initiates the traverse in the opposite direction.
ACT-3
ACTUATORS
Ecology Seal
ACTUATORS
Ecology Seal
COMPETITIVE CYLINDERS
with Adjustable Cushions
Acceleration: 1
div. = 10 Gs
X Axis: 1 div. =
.03 seconds
Acceleration: 1
div. = 10 Gs
X Axis: 1 div. =
.03 seconds
Acceleration: 1
div. = 10 Gs
X Axis: 1 div. =
.03 seconds
Velocity: 1 div.
= 20 in/sec.
14.5 lbs. added
to rod
Velocity: 1 div.
= 20 in/sec.
2.5 lbs.
added to rod
Velocity: 1 div.
= 20 in/sec.
14.5 lbs. added
to rod
Hear the difference between Ecology seal cylinders with fixed cushions and
non-cushioned cylinders!
Summary of Sound Levels in Decibels
Cylinder Model Number
PSI Air Sound
Pressure Level +
95 PSI+
50 PSI+
End ++
Side ++
End ++
Side ++
Ecology
A0133B3
5 X 6
EA0155B3
5 X 6
Ecology
A1133A3
2 X 6
EA1155A3
2 X 6
108
112
108
113
73
84
73
85
110
110
113
110
74
81
74
81
Complete technical data for the Ecology option can be found in the corresponding product
line section of the catalog
ACT-4
ACT-5
ACTUATORS
Ecology Seal
ACTUATORS
3
5
6
3
ACT-6
5
4
3
1
2
13
11
12
12
10
ACT-7
ACTUATORS
Series A Cylinders are constructed with the finest materials for each component!
ACTUATORS
1
2
2
3
9
8
4
10
12
11
13
8
ACT-8
Series J Cylinders are constructed with the finest materials for each component!
1 Piston Rod: Hard chrome plated high-tensile
steel, ground and polished.
2 Rod Bearing: External removable threaded
steel bearing housing (black oxide finish), with an
oil-impregnated sintered iron rod bearing.
3 Rod Seal: Nitrile lip-type seal is pressure
energized and wear compensating for durability
and long life.
4 Head/Cap: Precision machined from steel,
then black oxide finished 1-1/2" to 2-1/2" bores.
Painted black finish on 3-1/4" to 12" bores.
Tie
7 Rods: High-strength steel maintains uniform
compression on tube end seals.
6
7
5
4
3
1
2
10
11
12 13
12
9
10 Wiper Seal: Lip-type urethane wiper seal
keeps contaminates from getting into cylinder
by aggressively wiping foreign materials from
the piston rod, enhancing the rod seal life.
Application Information
ACT-9
ACTUATORS
ACTUATORS
Series EJ Ecology Cylinders are constructed with the finest materials for
each component!
1 Ultra Cushion Seals: Advanced design
features a unique, one-piece, compound seal of
nitrile* captured within a precision machined
groove. Linear and radial float of the cushion
seals eliminates misalignment. Ultra Cushions
provide exceptionally fast out of cushion
stroke reversal. (Head and Cap Cushions are
optional.)
*Nitrile seals on the 5/8" & 1" rod diameter.
For rod sizes 1-3/8" and larger, urethane seals are standard.
1
2
2
9
8
4
10
12
11
ACT-10
13
8
12 Rod Seal: Nitrile lip-type seal is pressure
energized and wear compensating for durability
and long life.
Operates Quietly
to Meet
OSHA Specifications.
J133B3
5" x 6"
95 End++
PSI+ Side++
108
73
110
74
108
73
110
74
112
84
110
81
112
84
110
81
108
73
113
74
108
73
113
74
113
85
110
81
113
85
110
81
50 End++
PSI+ Side++
EJ155B3
5" x 6"
J1133A3
2" x 6"
EA155B3
5" x 6"
A1133A3
2" x 6"
EA1155A3
2" x 6"
Energy Absorption
Capacity of the Impact
Dampening Seals
Cylinder Model
EJ1155A3
A133B3
2" x 6"
5" x 6"
This chart features the energy absorption capacity of the impact dampening piston seals
with a Non-Adjustable cushions. For higher loads and velocities please refer to the Decel- Air Cushion.
In/Sec
6
12
18
24
30
36
42
48
54
60
11/2
155.6
38.4
16.7
9.2
5.6
3.7
2.6
1.8
1.3
1.0
2
275.5
68.1
29.7
16.3
10.0
6.7
4.6
3.2
2.4
1.8
21/2
499.8
123.4
53.7
29.4
18.1
11.9
8.2
5.8
4.2
3.0
31/4
969.3
239.7
104.6
57.3
35.4
23.5
16.3
11.7
8.5
6.2
4
1505.4
372.6
162.8
89.4
55.4
37.0
25.8
18.6
13.6
10.1
Cylinder Bore
5
2603.2
644.8
282.1
155.2
96.4
64.5
45.3
32.8
24.2
18.1
6
4159.8
1030.2
450.6
247.8
153.9
102.9
72.2
52.2
38.5
28.7
7
5794.2
1435.8
628.7
346.2
215.4
144.4
101.6
73.8
54.7
41.1
8
8067.6
2000.4
876.8
483.6
301.6
202.7
143.1
104.4
77.9
58.9
10
12,242
3026
1319.3
722
445.5
295.3
204.8
146
105.7
76.9
12
20,139
4971
2162.1
1179
724
476.8
327.7
231
164.7
117.2
*The weight of the cylinder piston has been deducted from the figures shown above.
Note: The use of Viton Seals limits the absorption of the impact dampening seals by 50%.
11/2
279
68
30
16
10
6.7
4.7
3.4
2.3
1.8
6
12
18
24
30
36
42
48
54
60
2
495
122
53
29
18
12
8.3
5.7
4.3
3.2
21/2
899
221
95
52
32
21.6
14.7
10.4
7.6
5.4
31/4
1,744
430
187
102
63
42
29
21
15.3
11
Cylinder Bore
4
2,709
699
291
160
99
66
46
33
24
18
5
4,685
1,159
507
279
172
116
81
59
43
33
6
7,486
1,854
810
444
275
183
129
93
68
52
7
10,429
2,583
1,130
622
387
259
181
131
97
74
8
4,520
3,800
1,576
869
541
363
257
187
138
106
10
22,035
5,446
2,374
1,299
801
531
367
262
189
138
12
36,250
8,947
3,891
1,414
1,303
856
588
415
295
211
10
.36
.24
.15
.09
.04
0
12
.40
.26
.16
.10
.04
0
PSI
0
20
40
60
80
100
11/2
.14
.10
.07
.04
.02
0
2
.15
.10
.07
.04
.02
0
21/2
.17
.12
.08
.05
.02
0
31/4
.19
.14
.09
.05
.02
0
4
.22
.16
.10
.06
.03
0
Cylinder Bore
5
.25
.18
.12
.07
.03
0
6
.28
.20
.13
.07
.03
0
7
.32
.22
.14
.08
.04
0
8
.32
.22
.14
.08
.04
0
Note: These figures are for new cylinders. The impact dampening seals will take some compression set during operation
of the cylinder and the stroke loss will decrease. Also, the pressure at zero stroke loss will decrease to about 80 psi.
At pressures above those of zero stroke loss, a slight clicking sound may be produced during impact.
To determine the stroke loss for either the head or cap end, divide the value shown by 2.
ACT-11
ACTUATORS
ACTUATORS
As the piston continues its travel to the point of impact with the
end caps, the compressive qualities of the EJ seal provide the
final decelerating force. This action compresses the EJ seal and
absorbs the remaining kinetic shock vibration and noise
created by the impact.
Operating Temperatures:
Lubrication:
Side Loading:
Series A & J
None required
Norgren Air Cylinders are rated for no lube
added service. All internal components are
lubricated at time of assembly with a Teflon
based grease.
-20F to 200F
(-29C to 107C)
-20F to 400F
(-29C to 204C)
Operating Pressure:
Materials:
Supply:
Filtered compressed air to 250 PSI Petroleum
based hydraulic fluid to 400 PSI
Ultra Cushion
A Major Design and Performance Breakthrough
in Air Cylinder Cushioning Systems!
Norgrens advanced cushion design features a unique, onepiece, nitrile compound seal that is captured within a
precision machined groove. This allows both linear and radial
float of the cushion seal which virtually eliminates problems
associated with misalignment. Integral flow paths molded in
the periphery of the seal provide exceptionally fast out of
cushion stroke reversal without the use of ball checks.
ACT-12
Figure 1
COMPETITIVE CYLINDERS
with Adjustable Cushions
Acceleration: 1
div. = 10 Gs
X Axis: 1 div. =
.03 seconds
Acceleration: 1
div. = 10 Gs
X Axis: 1 div. =
.03 seconds
Acceleration: 1
div. = 10 Gs
X Axis: 1 div. =
.03 seconds
Velocity: 1 div.
= 20 in/sec.
14.5 lbs. added
to rod
Velocity: 1 div.
= 20 in/sec.
2.5 lbs.
added to rod
Velocity: 1 div.
= 20 in/sec.
14.5 lbs. added
to rod
Acceleration: 1
div. = 10 Gs
X Axis: 1 div. =
.03 seconds
Acceleration: 1
div. = 10 Gs
X Axis: 1 div. =
.03 seconds
Acceleration:
1 div. = 10 Gs
X Axis: 1 div. =
.02 seconds
Velocity: 1 div.
= 20 in/sec.
14.5 lbs.
added to rod
Velocity: 1 div.
= 20 in/sec.
2.5 lbs. added
to rod
Velocity: 1 div.
= 20 in/sec.
14.5 lbs. added
to rod
Figures shown are average and not the result of each individual test. Piston velocity was
regulated at 45 in/sec.
Figures shown are average and not the result of each individual test. Piston velocity was
regulated at 25 in/sec.
Cylinders with
Cushions
Norgren Ecology
Adjustable
8.5
14.50
25.00
Cylinders with
Cushions
1.00
Norgren Ecology
Adjustable
54
5.25
40.00
3.25
54
12.00
28.75
2.75
Norgren Ecology
Non-Adjustable
8.5
17.50
26.25
1.75
Norgren Ecology
Non-Adjustable
Competitor A
Adjustable
8.5
48.00
107.50
7.25
Competitor A
Adjustable
54
11.50
92.50
6.75
54
8.00
77.50
5.25
54
6.50
67.50
6.25
Competitor B
Adjustable
8.5
32.75
102.50
6.50
Competitor B
Adjustable
Competitor C
Adjustable
8.5
50.50
81.25
9.25
Competitor C
Adjustable
*Measured in Gs of deceleration force created. All cylinders tested were NFPA types, front
flange mounting, 6" stroke with standard diameter piston rods.
*Measured in Gs of deceleration force created. All cylinders tested were NFPA types, front
flange mounting, 6" stroke with standard diameter piston rods.
ACT-13
ACTUATORS
ACTUATORS
Impact Dampening
Ecology Piston Seals
absorb final impact and
provide end of stroke
cushioning assistance.
ACT-14
1-1/2
558
136
60
32
20
13.4
9.4
6.8
4.6
2
990
244
106
58
36
24
16.6
11.4
8.6
2-1/2
1.798
442
190
104
64
43
29
20.8
10.8
3-1/4
3.488
860
374
204
126
84
58
42
30
Cylinder Bore
4
5
6
5.418 9.370 14.972
1.338 2.318 3.708
582
1.014 1.620
320
558
888
198
344
550
132
232
366
92
162
258
66
118
186
48
86
136
7
20.040
5.166
2.260
1.244
774
518
362
262
194
8
20.858
7.600
3.152
1.738
1.082
726
514
374
276
10
12
44.070 72.500
10.892 17.894
4.748 7.782
2.598 2.828
1.602 2.606
1.062 1.712
734
1.176
524
830
378
590
MB + Stroke
NOTE:
All dimensions not shown are per STD NFPA dimensions
For cylinders with (1) Decel Cushion AOL dimension wil be MB-J.
Cyl.
Bore
1-1/2
2
2-1/2
3-1/4
4
5
6
7
8
G
1-1/2
1-1/2
1-1/2
1-3/4
1-3/4
1-3/4
2
2
2
J
1
1
1
1-1/4
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
Add Stroke
MB
5-5/8
5-5/8
5-3/4
6-3/4
6-3/4
7
8
8-1/8
8-1/8
ACT-15
ACTUATORS
ACTUATORS
EJ 01
Series
Series A Cylinder (Aluminum)
Series A Double Rod End Cylinder
Series EA Cylinder
Series EA Double Rod End Cylinder
Series J Cylinder (Steel)
Series J Double Rod End Cylinder
Series EJ Cylinder
Series EJ Double Rod End Cylinder
A
DA
EA
EDA
J
DJ
EJ
EDJ
Mounting Options
Side Tapped (MS4)
Head Rectangular Flange (MF1)
Head Square (ME3) 7" & 8" Bores
Cap Rectangular Flange (MF2)
Cap Square (ME4) 7" & 8" Bores
Basic Cylinder No Mounting (MX0
Both Ends (4) Tie Rods Ext. (MX1)
Both Ends (2) Tie Rods Ext. (MX4)
Cap Tie Rods Ext. (MX2)
Head Tie Rods Ext. (MX3)
Removable Head Trunnion (MT1) - A & EA
Head Trunnion (MT1) - J & EJ
Removable Cap Trunnion (MT2) - A & EA
Cap Trunnion (MT2) - J & EJ
Side Lugs (MS2)
Center Trunnion (MT4)
Side End Angles (MS1)
Cap Fixed Clevis (MP1)
Side End Lugs (MS7)
Sleeve Nut Construction (Universal)
Head Square Flange (MF5)
Cap Square Flange (MF6)
Detachable Cap Clevis (MP2)
Cap Fixed Eye (MP3)
Detachable Cap Eye (MP4)
Spherical Bearing
Base Bar (Not NFPA A & EA Only)
01
03
03
04
04
05
06
6B
6C
6R
7R
07
8R
08
09
10
11
12
15
16
20
21
22
32
42
52
60
Cushion in Head
None
Non-Adjustable Cushion
Adjustable Cushion (Position 2)
Decel Cushion
3
5
7
9
2-1/2
3-1/4
3
5
7
9
rod
ltr.
A
B+
A
B
C+
A
B
C
D+
B
C
D
E
B
C
D
E
F
B
C
D
E
F
rod dia.
(mm)
5/8
1
5/8
1
1-3/8
5/8
1
1-3/8
1-3/4
1
1-3/8
1-3/4
2
1
1-3/8
1-3/4
2
2-1/2
1
1-3/8
1-3/4
2
2-1/2
Type
1
2
3
6
7
Cyl
bore
6
10
12
rod
ltr.
C
D
E
F
C
D
E
F
C
D
E
F
D
E
F
E
F
Notes
+ Head cushion not availale on these bore and piston rod
combinations.
Additional rod sizes available upon request.
Dimensions for thread sizes available on following pages.
ACT-16
L(_ _)
LE
LF
A
MS
N(_ _)
*P(_)
PS
RS
RX
S
SS
SB
ST(_R)
T
TX
V
* 1-1/2", 2", 2-1/2" bore cylinders have 3/8" NPT Standard, 1/2" NPT oversize.
3-1/4", 4", 5" bore cylinders have 1/2" NPT Standard, 3/4" NPT oversize.
Cushion in Cap
None
Non-Adjustable Cushion
Adjustable Cushion (Position 2)
Decel Cushion
HR
Dim ref
KK
CC
KK
FF
rod dia.
(mm)
1-3/8
1-3/4
2
2-1/2
1-3/8
1-3/4
2
2-1/2
1-3/8
1-3/4
2
2-1/2
1-3/4
2
2-1/2
2
2-1/2
Description
Stroke adjustment single piston (specify adjustment length)
Stroke adjustment double piston (specify adjustment length)
Acorn tie rod nuts (stainless steel)
Air/Oil piston (piston supplied with O-ring hooded U-cup on cap end for air/oil operation)
Removable piston rod stud (installed with removable adhesive sealant)
Electroless nickel plated cylinder
Pneulectric stroke signal valve(s): EV(Head Cap) (specify position)
Black fiberglass cylinder tube
Piston rod seals O-ring loaded U-cups (A & J Only)
Case hardened piston rod
Non-standard port location position 1 standard: L (Head Cap) (specify position 1 thru 4 for head and/or cap)
Rodlock with manual release
Rodlock
Low friction cylinder (Nitrile compounded with Teflon rod and piston seals) (Not available with Ecology series)
Metal scraper
Cushion adjust screw location position 2 standard:N(Head Cap) (specify position 1 thru 4 for head and/or cap)
Non-standard port sizes [specify port size for P(H) head only, P(C) cap only, or P() both head & cap]
Seals in cylinder O-ring loaded U-cups (rod and piston seals) (A & J Only)
Pinned piston and rod assembly
Magnetic piston modification
Studded male piston rod end
Piston rod extension over standard (specify additional C length)
303/304 Stainless steel tie rods & nuts
Stainless steel rod bushing nut
Single acting spring extend cap end of cylinder
Steel cylinder tubing
Single acting spring retract rod end of cylinder
303 Stainless steel piston rod
Stop tube on cap end (C) of cylinder: ST (stop tube length C)
Stop tube on rod end (R) of cylinder: ST (stop tube length R)
Stroke signal valve(s): SV (head cap)
Non-standard piston rod thread (specify thread)
Piston rod thread depth over standard (Female) (specify additional A length)
Stainless cylinder tubing
Piston rod thread extension over standard (Male) (specify additional A length)
Head and cap bumpers (Adds 1/4" per bumper to overall length)
Cap bumper (Adds 1/4" per bumper to overall length)
Head bumper (Adds 1/4" per bumper to overall length)
Viton seals in cylinder
Type #10 trunnion set dimension (MT4 model only) (customer must specify length)
Standard available for 11/2", 2", 2-1/2" bores, 12" max stroke. (Stroke length doubles 24" max); 12 lbs. force preload, 30 lbs. force compressed.
Cushions not available on spring end. For other spring forces, bore sizes or longer strokes, consult factory.
*UA Unit Air Assembly
** When ordering EN option specify S, SS, TS, and SB options.
Description
Airsaver stroke adjustment
Cylinders mounted back to back
Close tolerance on cylinder stroke
Low friction cylinder (Pak-LapTM style seals)
Nituff coated cylinder
No silicone used in cylinder assembly
Zero stroke/pneulectric stroke signal valve(s)
Zero stroke/stroke signal valve(s)
Rod boot over piston rod
Nituff coated cylinder tubing
Thrust key plate mounting [01 (MS4), 09 (MS2), and 15 (MS7)
Valve mounting only
ACT-17
ACTUATORS
ACTUATORS
EE NPT (2)
P + Stroke
B Bushing
MM
KK
Thds
A
D
(Flats)
R
E Sq.
B
CC
Thds.
MM
D
Across
Flats
Bore
Rod Std.
MM O.S.
A
Std.
O.S.
B +.000 Std.
-.002 O.S.
C
Std.
O.S.
CC
Std.
O.S.
D
Std.
O.S.
E
EE
FF
Std.
O.S.
G
J
K
KK
Std.
O.S.
LB
P
R
VF
Std.
O.S.
Y
Std.
O.S.
ZB
Std.
O.S.
1-1/2"
5/8"
1"
.750
1.125
1.124
1.499
.375
.500
1/2 20
7/8 14
.500
.813
2.000
.375
5/8-18
1 14
1.500
1.000
.250
7/16 20
3/4 16
3.625
2.340
1.428
.625
.875
1.840
2.220
4.875
5.250
C
VF
B
KK
Thds.
A Deep
MM
A
B
FF
Thds.
MM
MM
MM
A
C
VF
ZB + Stroke
B
CC
Thds.
MM
A
J
LB + Stroke
VF
B
KK
Thds.
B
KK
Thds.
C
VF
C
VF
C
VF
VF
Type 1 Solid
Type 1 Studded
Type 2 Studded
Type 2 Solid
Type 3 Female
Type 6 Solid
(Small Male)
(Intermediate Thread
Male Optional)
(Intermediate Thread
Male Optional)
(Optional)
(Full Thread
Male Optional)
2"
5/8"
1"
.750
1.125
1.124
1.499
.375
.500
1/2 20
7/8 14
.500
.813
2.500
.375
5/8-18
1 14
1.500
1.000
.313
7/16 20
3/4 16
3.625
2.340
1.838
.625
.875
1.840
2.220
4.938
5.313
2-1/2"
5/8"
1"
.750
1.125
1.124
1.499
.375
.500
1/2 20
7/8 14
.500
.813
3.000
.375
5/8-18
1 14
1.500
1.000
.313
7/16 20
3/4 16
3.750
2.470
2.192
.625
.875
1.840
2.220
5.063
5.438
3-1/4"
1"
1-3/8"
1.125
1.625
1.499
1.999
.500
.625
7/8 14
1-1/4-12
.813
1.125
3.750
.500
1 14
1-3/8-12
1.750
1.250
.375
3/4 16
1 14
4.250
2.690
2.758
.875
1.000
2.380
2.630
6.000
6.250
4"
1"
1-3/8"
1.125
1.625
1.499
V 1.999
.500
.625
7/8 14
1-1/4-12
.813
1.125
4.500
.500
1 14
1-3/8-12
1.750
1.250
.375
3/4 16
1 14
4.250
2.690
3.323
.875
1.000
2.380
2.630
6.000
6.250
5"
1"
1-3/8"
1.125
1.625
1.499
1.999
.500
.625
7/8 14
1-1/4-12
.813
1.125
5.500
.500
1 14
1-3/8-12
1.750
1.250
.438
3/4 16
1 14
4.500
2.940
4.101
.875
1.000
2.380
2.630
6.313
6.563
6"
1-3/8"
1-3/4"
1.625
2.000
1.999
2.374
.625
.750
1-1/4-12
1-1/2-12
1.125
1.500
6.500
.750
1-3/8-12
1-3/4-12
2.000
1.500
.438
1 14
1-1/4 12
5.000
3.125
4.87
1.000
1.125
2.813
3.063
7.063
7.313
7"
1-3/8"
1-3/4"
1.625
2.000
1.999
2.374
.625
.750
1-1/4-12
1-1/2-12
1.125
1.500
7.500
.750
1-3/8-12
1-3/4-12
2.000
1.500
.563
1 14
1-1/4 12
5.125
3.250
5.730
1.000
1.125
2.813
3.063
7.313
7.563
8"
1-3/8"
1-3/4"
1.625
2.000
1.999
2.374
.625
.750
1-1/4-12
1-1/2-12
1.125
1.500
8.500
.750
1-3/8-12
1-3/4-12
2.000
1.500
.563
1 14
1-1/4 12
5.125
3.250
6.442
1.000
1.125
2.813
3.063
7.313
7.563
10"
1-3/4"
2"
2.000
2.250
2.374
2.624
.750
.875
1-1/2-12
1-3/4-12
1.500
1.688
10.625
1.000
1-3/4-12
2-12
2.250
2.000
.688
1-1/4 12
1-1/2 12
6.375
4.125
8.004
1.125
1.125
3.125
3.250
8.938
9.063
12"
2"
2-1/2"
2.250
3.000
2.624
3.124
.875
1.000
1-3/4-12
2-1/4-12
1.688
2.063
12.750
1.000
2-12
2-1/2-12
2.250
2.000
.688
1-1/2 12
1-7/8 12
6.875
4.625
9.4069
1.125
1.250
3.250
3.500
9.563
9.813
10"
1.500
18
4.125
5.500
3.125
3.250
12"
1.500
18
4.625
7.250
3.250
3.500
TN
Bore
ND
NT
SN
TN
XT
Std.
O.S.
1-1/2"
.375
1/4 20
2.250
.625
1.938
2.313
2"
.375
5/16 18
2.250
.875
1.938
2.313
2-1/2"
.500
3/8 16
2.375
1.250
1.938
2.313
3-1/4"
.750
1/2 13
2.625
1.500
2.438
2.688
4"
.750
1/2 13
2.625
2.063
2.438
2.688
NT Tap
ND Deep
5"
.938
5/8 11
2.875
2.688
2.438
2.688
SN + Stroke
XT
6"
1.125
3/4 10
3.125
3.250
2.813
3.063
7"
1.125
3/4 10
3.250
3.500
2.813
3.063
8"
1.125
3/4 10
3.250
4.500
2.813
3.063
ACT-18
FB Holes (4)
FB Holes (4)
E R
E R
TF
F
ZF + Stroke
UF
Bore
E
F
FB
R
TF
UF
W Std.
O.S.
1-1/2"
2.000
.375
.313
1.428
2.750
3.375
.625
1.000
2"
2.500
.375
.375
1.838
3.375
4.125
.625
1.000
2-1/2"
3.000
.375
.375
2.192
3.875
4.625
.625
1.000
3-1/4"
3.750
.625
.438
2.758
4.688
5.500
.750
1.000
4"
4.500
.625
.438
3.323
5.438
6.250
.750
1.000
5"
5.500
.625
.563
4.101
6.625
7.625
.750
1.000
6"
6.500
.750
.563
4.879
7.625
8.625
.875
1.125
Bore
E
F
R
TF
UF
ZF Std.
O.S.
1-1/2"
2.000
.375
1.428
2.750
3.375
5.000
5.375
2"
2.500
.375
1.838
3.375
4.125
5.000
5.375
2-1/2"
3.000
.375
2.192
3.875
4.625
5.125
5.500
TF
UF
3-1/4"
3.750
.625
2.758
4.687
5.500
6.250
6.500
4"
4.500
.625
3.323
5.438
6.250
6.250
6.500
5"
5.500
.625
4.101
6.625
7.625
6.500
6.750
6"
6.500
.750
4.879
7.625
8.625
7.375
7.625
EB Holes (4)
TE sq.
R sq.
R sq.
E sq.
Bore
E
EB
R
TE
7"
7.500
.563
5.730
6.750
8"
8.500
.688
6.442
7.570
10"
10.625
.813
8.004
9.406
E sq.
12"
12.750
.813
9.406
11.109
Bore
E
EB
R
TE
7"
7.500
.563
5.730
6.750
8"
8.500
.688
6.442
7.570
10"
10.625
.813
8.004
9.406
06 (MX1)
AA
VF
ZB + Stroke
BB
6R (MX3)
BB
ZB + Stroke
DD
F
K
R
VF
ZB
Std.
O.S.
Std.
O.S.
Std.
O.S.
1-1/2"
2.020
1.000
.375
.500
1/4 28
.375
.250
1.428
.625
.875
4.875
5.250
2"
2.600
1.125
.375
.500
5/16 24
.375
.313
1.838
.625
.875
4.938
5.313
2-1/2"
3.100
1.125
.375
.500
5/16 24
.375
.313
2.192
.625
.875
5.063
5.438
3-1/4"
3.900
1.375
.500
.625
3/8 24
.625
.375
2.758
.875
1.000
6.000
6.250
4"
4.700
1.375
.500
.625
3/8 24
.625
.375
3.323
.875
1.000
6.000
6.250
BB
6C (MX2)
Bore
AA
BB
C
12"
12.750
.813
9.406
11.109
6B (MX4)
BB
DD
Thds.
5"
5.800
1.813
.500
.625
1/2 20
.625
.438
4.101
.875
1.000
6.313
6.563
DD
Thds.
6"
6.900
1.813
.625
.750
1/2 20
.750
.438
4.879
1.000
1.125
7.063
7.313
ZB + Stroke
7"
8.100
2.313
.625
.625
5/8 18
.563
5.730
1.000
1.125
7.313
7.563
DD
Thds.
8"
9.100
2.313
.625
.750
5/8 18
.563
6.442
1.000
1.125
7.313
7.563
ZB + Stroke
10"
11.313
2.688
.750
.875
3/4 16
.688
8.004
1.125
1.125
8.938
9.063
BB
12"
13.313
2.688
.875
1.000
3/4 16
.688
9.406
1.125
1.250
9.563
9.813
ACT-19
ACTUATORS
ACTUATORS
TL
TL
XG
UT
Bore
TD +.000 -.001
TL
UT
XG
Std.
O.S.
1-1/2"
1.000
1.000
4.000
1.750
2.125
2"
1.000
1.000
4.500
1.750
2.125
2-1/2"
1.000
1.000
5.000
1.750
2.125
3-1/4"
1.000
1.000
5.750
2.250
2.500
4"
1.000
1.000
6.500
2.250
2.500
5"
1.000
1.000
7.500
2.250
2.500
6"
1.375
1.375
9.250
2.625
2.875
7"
1.375
1.375
10.250
2.625
2.875
8"
1.375
1.375
11.250
2.625
2.875
10"
1.750
1.750
14.125
3.000
3.125
12"
1.750
1.750
16.250
3.125
3.375
TL
Bore
TD +.000 -.001
TL
UT
XJ
Std.
O.S.
1-1/2"
1.000
1.000
4.000
4.125
4.500
2"
1.000
1.000
4.500
4.125
4.500
2-1/2"
1.000
1.000
5.000
4.250
4.625
3-1/4"
1.000
1.000
5.750
5.000
5.250
4"
1.000
1.000
6.500
5.000
5.250
5"
1.000
1.000
7.500
5.250
5.500
6"
1.375
1.375
9.250
5.875
6.125
TL
UT
XJ + Stroke
7"
1.375
1.375
10.250
6.000
6.250
8"
1.375
1.375
11.250
6.000
6.250
10"
1.750
1.750
14.125
7.250
7.375
12"
1.750
1.750
16.250
7.875
8.125
Bore
G
J
SB
SH
SJ
SS
ST
SU
SW
TS
US
XS
Std.
O.S.
1-1/2"
1.500
1.000
.438
1.000
.625
2.875
.500
1.125
.375
2.750
3.500
1.375
1.750
2"
1.500
1.000
.438
1.250
.625
2.875
.500
1.125
.375
3.250
4.000
1.375
1.750
2-1/2"
1.500
1.000
.438
1.500
.625
3.000
.500
1.125
.375
3.750
4.500
1.375
1.750
3-1/4"
1.750
1.250
.563
1.875
.750
3.250
.750
1.250
.500
4.750
5.750
1.875
2.125
4"
1.750
1.250
.563
2.250
.750
3.250
.750
1.250
.500
5.500
6.500
1.875
2.125
5"
1.750
1.250
.813
2.750
.813
3.125
1.000
1.063
.688
6.875
8.250
2.062
2.313
SW
J
SJ
SU
6"
2.000
1.500
.813
3.250
.813
3.625
1.000
1.563
.688
7.875
9.250
2.313
2.562
7"
2.000
1.500
.813
3.750
.813
3.750
1.000
1.563
.688
8.875
10.250
2.313
2.563
8"
2.000
1.500
.813
4.250
.813
3.750
1.000
1.563
.688
9.875
11.250
2.313
2.563
10"
2.250
2.000
1.063
5.313
2.000
4.625
1.250
2.000
.875
12.375
14.125
2.750
2.875
ACT-20
SW
SS + Stroke
XS
12"
2.250
2.000
1.063
6.375
2.000
5.125
1.250
2.000
.875
14.500
16.250
2.875
3.125
TL
Customer
Must Specify
XI
TL
TM
UM
Bore
BD
TD +.000
TL
TM
UM
UV
XI min.
-.001
Std.
O.S.
1-1/2"
1.250
1.000
1.000
2.500
4.500
2.500
3.125
3.500
2"
1.500
1.000
1.000
3.000
5.000
3.000
3.250
3.625
2-1/2"
1.500
1.000
1.000
3.500
5.500
3.500
3.250
3.625
3-1/4"
2.000
1.000
1.000
4.500
6.500
4.250
4.125
4.375
4"
2.000
1.000
1.000
5.250
7.250
5.000
4.125
4.375
5"
2.000
1.000
1.000
6.250
8.250
6.000
4.125
4.375
6"
2.500
1.375
1.375
7.625
10.375
7.000
4.625
4.875
BD
XI (Min.)
7"
2.500
1.375
1.375
8.750
11.500
8.500
4.875
5.125
8"
2.500
1.375
1.375
9.750
12.500
9.500
4.875
5.125
10"
3.000
1.750
1.750
12.000
15.500
11.750
5.625
5.750
12"
3.000
1.750
1.750
14.000
17.500
13.750
5.750
6.000
WF
AH
AT
AB
LB + Stroke
NF
AL
AO
SA + Stroke
Bore
AB
AH
AL
AO
AT
LB
NF
S
SA
WF
STD.
O.S.
1-1/2"
.438
1.188
1.000
.375
.125
3.625
1.375
1.250
6.000
1.000
1.375
2"
.438
1.438
1.000
.375
.125
3.625
1.375
1.750
6.000
1.000
1.375
2-1/2"
.438
1.625
1.000
.375
.125
3.750
1.375
2.250
6.125
1.000
1.375
3-1/4"
.563
1.938
1.250
.500
.125
4.250
1.875
2.750
7.375
1.375
1.625
4"
.563
2.250
1.250
.500
.125
4.250
1.875
3.500
7.375
1.375
1.625
5"
.688
2.750
1.375
.625
.187
4.500
2.000
4.250
7.875
1.375
1.625
6"
.813
3.250
1.375
.625
A
.187
5.000
2.125
5.250
8.500
1.625
1.875
7"
.813
3.750
1.813
.688
.250
5.125
1.813
6.125
8.750
1.625
1.875
8"
.813
4.250
1.813
.688
.250
5.125
1.813
7.125
8.750
1.625
1.875
10"
1.063
5.313
2.125
.875
.250
6.375
1.813
8.875
10.625
1.875
2.000
12"
1.063
6.375
2.125
.875
.250
6.875
1.813
11.000
11.125
2.000
2.250
LR
Standard pin
included
CD
MR
LB + Stroke
CB
CW
CW
XC + Stroke
Bore
CB
CD
CW
L
LB
LR
MR
XC
Std.
O.S.
1-1/2"
.750
.500
.500
.750
3.625
.750
.625
5.375
5.750
2"
.750
.500
.500
.750
3.625
.750
.625
5.375
5.750
2-1/2"
.750
.500
.500
.750
3.750
.750
.625
5.500
5.875
3-1/4"
1.250
.750
.625
1.250
4.250
1.250
.938
6.875
7.125
4"
1.250
.750
.625
1.250
4.250
1.250
.938
6.875
7.125
5"
1.250
.750
.625
1.250
4.500
1.250
.938
7.125
7.375
6"
1.500
1.000
.750
1.500
5.000
1.500
1.188
8.125
8.375
7"
1.500
1.000
.750
1.500
5.125
1.500
1.188
8.250
8.500
8"
1.500
1.000
.750
1.500
5.125
1.500
1.188
8.250
8.500
10"
2.000
1.375
1.000
2.125
6.375
1.875
1.625
10.375
10.500
12"
2.500
1.750
1.250
2.250
6.875
2.125
2.125
11.125
11.375
ACT-21
ACTUATORS
ACTUATORS
EB Hole (4)
ET
EO
EF
EL
ZE + Stroke
EO
TN
SE + Stroke
Bore
EB
EF
EL
EO
ET
R
SE
ZE Std.
O.S.
1-1/2"
.313
1.125
.750
.250
.500
1.428
5.500
5.625
6.000
2"
.375
1.313
.938
.313
.750
1.838
5.875
5.875
6.250
2-1/2"
.375
1.438
1.063
A
.313
.750
2.192
6.250
6.125
6.500
3-1/4"
.438
1.500
.875
.375
1.000
2.758
6.625
6.875
7.125
4"
.438
1.625
1.000
.375
1.250
3.323
6.875
7.000
7.250
5"
.563
1.688
1.063
.500
1.500
4.101
7.250
7.438
7.688
6"
.563
1.750
1.000
.500
1.500
4.879
7.750
8.125
8.375
7"
.688
1.750
1.125
.625
1.750
5.730
7.375
8.500
8.750
8"
.688
1.750
1.125
.625
2.063
6.442
7.375
8.500
8.750
Bore
DD
NT
ND
R
SN
TN
XT Std.
O.S.
1-1/2"
1/4-28
1/4 20
.375
1.428
2.250
.625
1.938
2.313
2"
5/16-24
5/16 18
.375
1.838
2.250
.875
1.938
2.313
SN + Stroke
XT
NT Tap
ND Depth
2-1/2"
5/16-24
3/8 16
.500
2.192
2.375
1.250
1.938
2.313
3-1/4"
3/8-24
1/2 13
.750
2.758
2.625
1.500
2.438
2.688
4"
3/8-24
1/2 13
.750
3.323
2.625
2.063
2.438
2.688
FB Holes (8)
Bore
F
FB
G
R
TF
UF
V Std.
O.S.
W Std.
O.S.
WF Std.
O.S.
1-1/2"
.375
.313
1.500
1.428
2.750
3.375
.250
.500
.625
1.000
1.000
1.375
2"
.375
.375
1.500
1.838
3.375
4.125
.250
.500
.625
1.000
1.000
1.375
2-1/2"
.375
.375
1.500
2.192
3.875
4.625
.250
.500
.625
1.000
1.000
1.375
UF TF
V
W F
WF
3-1/4"
.625
.438
1.750
2.758
4.688
5.500
.250
.375
.750
1.000
1.375
1.625
LB + Stroke
XF + Stroke
ZF + Stroke
4"
.625
.438
1.750
3.323
5.438
6.250
.250
.375
.750
1.000
1.375
1.625
5"
.625
.563
1.750
4.101
6.625
7.625
.250
.375
.750
1.000
1.375
1.625
Bore
F
FB
J
LB
R
TF
UF
XF Std.
O.S.
ZF Std.
O.S.
6"
.750
.563
2.000
4.879
7.625
8.625
.250
.375
.875
1.125
1.625
1.875
1-1/2"
.375
.313
1.000
3.625
1.428
2.750
3.375
4.625
5.000
5.000
5.375
2"
.375
.375
1.000
3.625
1.838
3.375
4.125
4.625
5.000
5.000
5.375
FB Holes (8)
2-1/2"
.375
.375
1.000
3.750
2.192
3.875
4.625
4.750
5.125
5.125
5.500
3-1/4"
.625
.438
1.250
A
4.250
2.758
4.688
5.500
5.625
5.875
6.250
6.500
4"
.625
.438
1.250
4.250
3.323
5.438
6.250
5.625
5.875
6.250
6.500
MR
FL
XD + Stroke
2-1/2"
.750
.500
.500
1.125
.750
.750
.500
.625
5.875
6.250
ACT-22
3-1/4"
1.250
.750
.625
1.875
1.250
1.250
.750
.938
7.500
7.750
4"
1.250
.750
.625
1.875
1.250
1.250
.750
.938
7.500
7.750
6"
.750
.563
1.500
5.000
4.879
7.625
8.625
6.625
6.875
7.375
7.625
CD
MR
2"
.750
.500
.500
1.125
.750
.750
.500
.625
5.750
6.125
5"
.625
.563
1.250
4.500
4.101
6.625
7.625
5.875
6.125
6.500
6.750
LR
CD
1-1/2"
.750
.500
.500
1.125
.750
.750
.500
.625
5.750
6.125
Bore
CB
CD
CW
FL
L
LR
M
MR
XD Std.
O.S.
6"
1/2-20
3/4 10
1.125
4.879
3.125
3.250
2.813
3.063
TF UF
5"
1/2-20
5/8 11
.938
4.101
2.875
2.688
2.438
2.688
5"
1.250
.750
.625
1.875
1.250
1.250
.750
.938
7.750
8.000
L
M
CW
6"
1.500
1.000
.750
2.250
1.500
1.500
1.000
1.188
8.875
9.125
CB
7"
1.500
1.000
.750
2.250
1.500
1.500
1.000
1.188
9.000
9.250
FL
CW
8"
1.500
1.000
.750
2.250
1.500
1.500
1.000
1.188
9.000
9.250
CB
XD + Stroke
Bore
CB
CD
FL
L
LR
M
MR
XD Std.
O.S.
1-1/2"
.750
.500
1.125
.750
.750
.500
.625
5.750
6.125
2"
.750
.500
1.125
.750
.750
.500
.625
5.750
6.125
2-1/2"
.750
.500
1.125
.750
.750
.500
.625
5.875
6.250
3-1/4"
1.250
.750
1.875
1.250
1.250
.750
.938
7.500
7.750
4"
1.250
.750
1.875
1.250
1.250
.750
.938
7.500
7.750
5"
1.250
.750
1.875
1.250
1.250
.750
.938
7.750
8.000
6"
1.500
1.000
2.250
1.500
1.500
1.000
1.188
8.875
9.125
7"
1.500
1.000
2.250
1.500
1.500
1.000
1.188
9.000
9.250
8"
1.500
1.000
2.250
1.500
1.500
1.000
1.188
9.000
9.250
LR
CD
MR
M
CB
XC + Stroke
Bore
CB
CD
L
LR
M
MR
XC
Std.
O.S.
1-1/2"
.750
.500
.750
.750
.500
.625
5.375
5.750
2"
.750
.500
.750
.750
.500
.625
5.375
5.750
2-1/2"
.750
.500
.750
.750
.500
.625
5.500
5.875
3-1/4"
1.250
.750
1.250
1.250
.750
.938
6.875
7.125
4"
1.250
.750
1.250
1.250
.750
.938
6.875
7.125
5"
1.250
.750
1.250
1.250
.750
.938
7.125
7.375
6"
1.500
1.000
1.500
1.500
1.000
1.188
8.125
8.375
7"
1.500
1.000
1.500
1.500
1.000
1.188
8.250
8.500
8"
1.500
1.000
1.500
1.500
1.000
1.188
8.250
8.500
10"
2.000
1.375
2.125
1.875
1.375
1.625
10.375
10.500
12"
2.500
1.750
2.250
2.125
1.750
2.125
11.125
11.375
KL
TS
US
SW
AM
XC + Stroke
Bore
AM
BI
CB
DC
FT
KL
XC Std.
O.S.
1-1/2"
.750
.438
.375
.500
.625
.969
5.375
5.750
2"
.750
.438
.375
.500
.625
.969
5.375
5.750
2-1/2"
.750
.438
.375
.500
.625
.969
5.500
5.875
3-1/4"
1.000
.656
.562
.750
1.000
1.406
6.875
7.125
4"
1.000
.656
.562
.750
1.000
1.406
6.875
7.125
5"
1.000
.656
.562
.750
1.000
1.406
7.125
7.375
CB
6"
1.250
.875
.75
1.000
1.250
1.719
8.125
8.375
7"
1.250
.875
.75
1.000
1.250
1.719
8.250
8.500
8"
1.250
.875
.75
1.000
1.250
1.719
8.250
8.500
Bore
G
SH
SS
ST
SU
SW
TS
US
XS Std.
O.S.
1-1/2"
1.500
1.250
2.875
.250
1.125
.375
2.750
3.500
1.375
1.750
XS
2"
1.500
1.500
2.875
.250
1.125
.375
3.250
4.000
1.375
1.750
2-1/2"
1.500
1.875
3.000
.375
1.125
.375
3.750
4.500
1.375
1.750
3-1/4"
1.750
2.375
3.250
.500
1.250
.500
4.750
5.750
1.875
2.125
G
SU
SS + Stroke
4"
1.750
2.750
3.250
.500
1.250
.500
5.500
6.500
1.875
2.125
5"
1.750
3.500
3.125
.750
1.063
.688
6.875
8.250
2.063
2.313
6"
2.000
4.000
3.625
.750
1.313
.688
7.875
9.250
2.313
2.563
WF
LD + Stroke
ZL + Stroke
ZM + 2x Stroke
Bore
LD
WF
ZL
ZM
Std.
O.S.
Std.
O.S.
Std.
O.S.
1-1/2"
4.125
1.000
1.375
5.375
5.750
6.125
6.875
2"
4.125
1.000
1.375
5.438
5.813
6.125
6.875
2-1/2"
4.250
1.000
1.375
5.563
5.938
6.250
7.000
3-1/4"
4.750
1.375
1.625
6.500
6.750
7.500
8.000
4"
4.750
1.375
1.625
6.500
6.750
7.500
8.000
5"
5.000
1.375
1.625
6.813 D
7.063
7.750
8.250
6"
5.500
1.625
1.875
7.563
7.813
8.750
9.250
7"
5.625
1.625
1.875
7.813
8.125
8.875
9.375
8"
5.625
1.625
1.875
7.813
8.125
8.875
9.375
10"
6.625
1.875
2.000
10.375
10.625
9.250
9.375
12"
7.125
2.000
2.250
11.125
11.625
9.675
10.375
ACT-23
ACTUATORS
ACTUATORS
ER Radius
CW
CB
CW
W
H
CD
CE
a Clevis
Mounted
L
A
KK Thds.
CB
.750
.750
.750
1.250
1.250
1.500
2.000
2.000
2.500
2.500
2.500
2.500
3.000
3.000
CD
.500
.500
.500
.750
.750
1.000
1.375
1.375
1.750
1.750
2.000
2.000
2.500
3.000
CE
1.500
1.500
1.500
2.375
2.375
3.125
4.125
4.125
4.500
4.500
5.500
5.500
6.500
6.750
Zerk
Fitting
CH
1.000
1.000
1.000
1.250
1.250
1.500
2.000
2.000
2.375
2.375
2.937
2.937
3.500
3.875
CW
.500
.500
.500
.625
.625
.750
1.000
1.000
1.250
1.250
1.250
1.250
1.500
1.500
ER
.500
.500
.500
.750
.750
1.000
1.375
1.000
1.750
1.750
2.000
2.000
2.750
2.750
CW
CB
L
.750
.750
.750
1.250
1.250
1.500
2.125
2.125
2.250
2.250
2.500
2.500
3.000
3.250
CW
C
KK Thds.
KK
a
A
B
C
D
H
J
K
W
49220
49220A
1-1/2, 2 & 2-1/2
1/2 20
12
2.125
.500
1.063
1.313
.453
.750
.875
.625
49221
49221A
3-1/4, 4 & 5
3/4 16
14
2.875
.750
1.563
1.750
.593
1.000
1.125
.875
49222
49222A
6&8
1 14
14
4.125
1.000
2.125
2.750
1.000
1.500
1.625
1.375
DD
4 Places
CD
L
E BA
CE
M Radius
CH
KK Thds.
CB
.500
.750
CD
.500
.750
CE
CH
CW
1.375 1.000 .250
1.750 1.500 .375
L
N
.750 .375
1.000 .500
KK Thds.
AF
KK
AF
H
KK
AF
H
52025
7/16 20
.688
.250
52092
1-3/8 12
2.063
.781
52026
1/2 20
.750
.313
52068
1-1/2 12
2.250
.844
52027
5/8 18
.938
.375
52082
1-3/4 12
2.625
.969
52010
3/4 16
1.125
.422
52070
1-7/8 12
2.938
1.031
CD
52029
7/8 14
1.313
.484
52093
2 12
3.125
1.094
CD
ER Radius
CD
52030
1 14
1.500
.547
52083
2-1/4 12
3.500
1.203
52085
1-1/4 12
1.875
.719
52075
2-1/2 12
3.875
1.453
CB
BA
E
F
FL
49021
49021A
1.625
.750
.500
.406
2.500
.375
1.125
.750
.500
49020
49020A
2.563
1.250
.750
.531
3.500
.625
1.875
1.250
.750
49019
49019A
3.250
1.500
1.000
.656
4.500
.750
2.250
1.500
1.000
ACT-24
KK
7/16 20
1/2 20
5/8 18
3/4 16
7/8 14
1 14
1-1/4 12
1-3/8 12
1-1/2 12
1-3/4 12
1-7/8 12
2 12
2-1/4 12
2-1/2 12
49017
49017A
4.937
2.500
1.750
.906
6.500
.875
3.125
2.250
1.750
CB
49018
49018A
5.750
2.500
2.000
1.026
7.500
1.000
3.500
2.500
2.000
DD
4 Places
LR Radius
CD
CD
E BA
CE
A
M
Radius
KK Thds.
Rod Eye
49015
49014
49091
49013
49092
49011
49010
49093
49009
49094
49007
49095
49062
49096
49016
49016A
3.813
2.000
1.375
.656
5.000
.875
3.000
2.125
1.375
A
.750
.750
.750
1.125
1.125
1.625
2.000
1.625
2.250
2.250
3.000
2.250
3.000
3.000
CB
.750
.750
1.250
1.250
1.250
1.500
2.000
2.000
2.500
2.500
2.500
2.500
3.000
3.000
CD
.500
.500
.750
.750
.750
1.000
1.375
1.375
1.750
1.750
2.000
2.000
2.500
3.000
CE
1.500
1.500
2.063
2.063
2.063
2.813
3.438
3.438
4.000
4.000
5.000
5.000
5.813
6.125
ER
.563
.563
.500
.938
.750
1.125
1.563
1.375
2.500
2.500
2.875
2.875
3.250
3.250
CB
BA
E
F
FL
49243
49244
49019
49016
49017 49018
49240A 49241A
1.438 1.844
.750
.750
.500
.500
.281
.344
2.000 2.500
.375
.375
1.125 1.125
.563
.563
.625
.625
49243A
2.938
1.250
.750
.469
3.750
.500
1.750
1.000
.875
49244A
3.563
1.250
.750
.469
4.500
.500
1.750
1.000
.875
49019A
3.250
1.500
1.000
.656
4.500
.750
2.250
1.500
1.000
49016A
3.813
2.000
1.375
.656
5.000
.875
3.000
2.125
1.375
49017A
4.950
2.500
1.750
.906
6.500
.875
3.125
2.250
1.750
49242A
2.188
.750
.500
.344
3.000
.375
1.125
.563
.625
49018A
5.730
2.500
2.000
1.062
7.500
1.000
3.500
2.500
2.000
DD
4 Places
MR
Radius
LR Radius
LR
Radius
CD
M
FL
E BA
CW
FL
49251
49251A
2.563
1.250
.750
.625
1/2 20
3.500
.625
1.875
1.250
.813
BA
E
CW
49252
49252A
3.250
1.500
1.000
.750
5/8 18
4.500
.750
2.250
1.500
1.000
R
E
DD
4 Places
CB
F
49250
49250A
1.625
.750
.500
.500
3/8 24
2.500
.375
1.125
.750
.500
CW
Pin Dia.
M Radius
CB
CW
CD
+ .001
49022
49022A
.750
.500
.500
.406
3.500
.500
1.500
.750
.500
.625
2.547
49023
49023A
1.250
.750
.625
.531
5.000
.625
1.875
1.188
.750
.906
3.828
49024
49024A
1.500
1.000
.750
.656
6.500
.750
2.250
1.500
1.000
1.250
4.953
49027
49027A
2.000
1.375
1.000
.656
8.000
.875
3.000
2.000
1.375
1.656
5.734
49025
49025A
2.500
1.750
1.250
.906
10.000
.875
3.625
2.750
1.750
2.219
7.500
49026
49026A
2.500
2.000
1.500
1.026
12.000
1.000
4.520
3.188
2.250
2.781
9.938
NFPA Pin
HP
Standard Pin
CD
CD
LP
LH
49006-R
500
2.219
1.875
49005-R
.750
3.125
2.750
49004-R
1.000
3.750
3.250
49003
1.375
4.750
4.250
.173
49002
1.750
5.812
5.250
.173
49001
2.000
5.812
5.281
.204
49000
2.000
6.312
5.770
.204
LP
LH
49126
2.500
6.875
6.312
.219
49127
3.000
6.875
6.344
.250
Std. Pin
CD
HP
LH
LP
49207*
.500
.156
1.421
1.266
49208*
.750
.156
2.000
1.843
49206
.500
.156
2.250
2.093
49205
.750
.156
3.000
2.843
49204
1.000
.203
3.500
3.297
49203
1.375
.250
5.000
4.500
49202
1.750
.250
6.000
5.500
49201
2.000
.250
6.000
5.500
F Shank
G Across Flats
A Thds.
A Thds.
.062
Radial Float
2 Spherical
Motion
E
H Across
Flats
E
D
C
CC-1-07
7/16 20
1.250 (31.75)
2.000 (50.80)
.500 (12.70)
.750 (19.05)
.625 (28.58)
.500 (12.70)
1.125 (28.58)
10,000
CC-1-08
1/2 20
1.250 (31.75)
2.000 (50.80)
.500 (12.70)
.750 (19.05)
.625 (28.58)
.500 (12.70)
1.125 (28.58)
14,000
CC-1-10
5/8 18
1.250 (31.75)
2.000 (50.80)
.500 (12.70)
.750 (19.05)
.625 (28.58)
.500 (12.70)
1.125 (28.58)
19,000
CC-1-12
3/4 16
1.750 (44.45)
2.312 (58.72)
.500 (12.70)
1.125 (28.58)
.969 (24.61)
.812 (20.62)
1.500 (38.10)
34,000
CC-1-14
7/8 14
1.750 (44.45)
2.312 (58.72)
.500 (12.70)
1.125 (28.58)
.969 (24.61)
.812 (20.62)
1.500 (38.10)
39,000
CC-1-16
1 14
2.500 (63.50)
2.937 (74.60)
.500 (12.70)
1.625 (41.28)
1.375 (34.93)
1.156 (29.36)
2.250 (57.15)
64,000
CC-1-20
1-1/4 12
2.500 (63.50)
2.937 (74.60)
.500 (12.70)
1.625 (41.28)
1.375 (34.93)
1.156 (29.36)
2.250 (57.15)
78,000
CC-1-24
1- 1/2 12
3.250 (82.50)
4.375 (111.13)
.812 (20.62)
2.250 (57.15)
1.750 (44.45)
1.500 (38.10)
3.000 (76.20)
134,000
CC-1-28
1-3/4 12
3.250 (82.50)
4.375 (111.13)
.812 (20.62)
2.250 (57.15)
1.750 (44.45)
1.500 (38.10)
3.000 (76.20)
134,000
ACT-25
ACTUATORS
Air-Oil Tank
Available in 5 practical bore sizes: 1-1/8", 2", 3-1/4", 5", and
8", the Air-Oil Tank includes a translucent fiberglass tube
which permits viewing of the tank oil level from any position,
internal baffles that reduce foaming and aeration of the
system oil resulting in maximum cylinder control, and
standard angle mounting brackets (except 1-1/8" bore) easily
removed for convenient fluid port positioning.
G
H
L NPT
Fill Port
J (4)
L NPT
Fill
Port
K NPT
Port
K NPT
Port
*C *B
*B *C *D
D
A
*plus internal length
1-1/8"
AOT-225
1.500 (38.10)
1.250 (31.75)
.750 (19.05)
.750 (19.05)
.125
.125
2"
AOT-04
2.687 (68.25)
2.000 (50.80)
4.000 (101.60)
4.750 (120.65)
.375
(9.53)
.125
(3.18)
2.500 (63.50)
1.750 (44.45)
.437 (11.10)
(3.18) .375
(9.53)
(3.18) .250
(6.35)
3-1/4"
AOT-065
4.000 (101.60)
2.500 (63.50)
5.000 (127.00)
6.000 (152.40)
.500 (12.70)
.187
(4.75)
3.750 (95.25)
2.750 (69.85)
.562 (14.27)
.500 (12.70)
.375
(9.53)
5"
AOT-10
5.625 (142.88)
2.500 (63.50)
5.250 (127.00)
6.500 (152.40)
.500 (12.70)
.187
(4.75)
5.500 (139.70)
4.25 (107.95)
.690 (17.53)
.500 (12.70)
.375
(9.53)
8
AOT-16
8.625 (219.08)
3.000 (76.20)
6.625 (168.28)
8.000 (203.20)
.687 (17.45)
.250
(6.35)
8.500 (215.90)
7.125 (180.98)
.812 (20.62)
.750 (19.05)
.500 (12.70)
ACTUATORS
Bore
Area
6"
8"
10"
12"
14"
16"
18"
20"
1-1/8"
.995 sq."
5.9
7.9
9.9
11.9
13.9
15.9
17.9
19.9
2"
3.14 sq."
18.6
25.1
31.4
37.6
43.9
50.2
56.5
62.8
3-1/4"
8.30 sq."
49.8
66.4
83.0
99.6
116.2
132.8
149.4
166.0
5"
19.64 sq."
117.8
157.1
196.4
235.6
274.9
314.2
353.5
392.8
8"
50.26 sq."
301.5
402.0
502.6
603.1
703.6
804.1
904.5
1005.2
How to Order: Specify air-oil tank part number and internal length.
Example: 2" bore with 6" internal length = AOT-04 x 6
Piston
Area
1.77
3.14
4.91
8.30
12.57
19.64
28.27
38.49
50.26
78.54
113.10
40
(11.40)
(20.27)
(31.67)
(53.32)
(81.07)
(126.71)
(182.39)
(247.91)
(324.26)
(506.74)
(729.72)
71
126
196
332
503
785
1130
1540
2010
3141
4524
(3)
60
(4)
80
(315)
(559)
(874)
(1477)
(2237)
(3491)
(5026)
(6831)
(8940)
(13974)
(20123)
106
189
295
498
754
1178
1696
2309
3015
4712
6786
(472)
(839)
(1311)
(2215)
(3355)
(5240)
(7544)
(10242)
(13411)
(20961)
(30184)
142
251
393
664
1005
1571
2262
3079
4020
6283
9048
PSI (bar)
(6)
(629)
(1119)
(1748)
(2953)
(4473)
(6988)
(10061)
(13658)
(17881)
(27948)
(40246)
100
(7)
150
(10)
177
314
491
830
1257
1964
2827
3849
5026
7854
11310
(786)
(1398)
(2185)
(3692)
(5592)
(8736)
(12574)
(17074)
(22356)
(34935)
(50307)
266
471
737
1245
1886
2946
4240
5774
7539
11781
16965
(1179)
(2097)
(3277)
(5538)
(8388)
(13104)
(18860)
(25613)
(33533)
(52402)
(75460)
200
353
628
982
1659
2513
3928
5654
7698
10052
15700
22620
(14)
(1570)
(2793)
(4368)
(7379)
(11178)
(17472)
(25149)
(34148)
(44711)
(69834)
(100614)
Volume
Cu Ft (cm3)
Displacement
Per Inch
.00102
.00182
.00284
.00480
.00727
.01137
.01636
.02227
.02909
.04545
.06545
(29)
(52)
(80)
(136)
(206)
(322)
(463)
(631)
(829)
(1282)
(1852)
Rod
5/8"
1"
1-3/8"
1-3/4"
2"
2-1/2"
Rod
Area
.307 (1.98)
.785 (5.06)
1.485 (9.58)
2.404 (15.51)
3.142 (20.16)
4.909 (31.67)
ACT-26
40
(3)
60
(4)
80
12
31
59
96
126
196
(53)
(138)
(262)
(423)
(559)
(873)
18
47
89
144
189
295
(80)
(209)
(396)
(641)
(839)
(1310)
25
63
119
192
251
393
(6)
PSI (bar)
100
(111)
(280)
(529)
(854)
(1118)
(1747)
31
78
149
240
314
491
(7)
150
(10)
(138)
(351)
(663)
(1068)
(1398)
(2184)
46
118
222
360
471
736
(205)
(525)
(997)
(1601)
(2096)
(3275)
200
61
157
297
480
628
981
(14)
(271)
(698)
(1321)
(2135)
(2795)
(4367)
Volume
Cu Ft (cm3)
Displacement
Per Inch
.00018
.00045
.00086
.00139
.00182
.00284
(5)
(13)
(24)
(39)
(52)
(80)
Notes
If personal safety is required, an unrelated, redundant
safety system should be used.
Rod locks require clean, dry, pressure regulated air,
lubrication is not required.
The rod must be kept clean and dry to maintain optimum
holding forces.
Rod rotation is not allowed when rod lock is engaged
(not intended for torsional braking).
Bore
Size
1.500 in
2.000 in
2.500 in
3.250 in
4.000 in
5.000 in
6.000 in
Holding*
Force
180 lbs
314 lbs
491 lbs
830 lbs
1257 lbs
1960 lbs
2825 lbs
(Dimensions in inches)
LE Option (Passive)
D
J
1/8-27 NPT
vent/breather
45
K c bore dia.
x
L depth
N
EE
A M
45
Manual release
5/16 torque screw
turn clockwise
A M
BC
BC
WF
VF
GG
F
K c bore dia.
x
L depth
VF
GG
F
LE Option
Bore
Dia.
1.50
2.00
2.50
3.25
4.00
5.00
6.00
BC
EE
GG
VF
0.625
0.625
0.625
1.000
1.000
1.000
1.375
2.022
2.602
3.097
3.903
4.695
5.798
6.901
2.00
2.50
3.00
3.75
4.50
5.50
6.50
1/8 NPT
1/8 NPT
1/8 NPT
1/4 NPT
1/4 NPT
1/4 NPT
1/4 NPT
1.95
2.08
2.13
2.99
2.99
3.34
4.43
2.397
2.422
2.540
3.976
3.976
4.443
5.306
2.77
2.80
2.91
4.48
4.48
4.69
5.36
0.375
0.375
0.375
0.500
0.500
0.500
0.625
0.91
1.02
1.02
1.56
1.56
1.56
1.68
0.281
0.344
0.344
0.406
0.406
0.531
0.531
0.438
0.516
0.516
0.719
0.719
0.844
0.844
BC
EE
GG
VF
0.625
0.625
0.625
1.000
1.000
1.000
1.375
2.022
2.602
3.097
3.903
4.695
5.798
6.901
2.00
2.50
3.00
3.75
4.50
5.50
6.50
1/8 NPT
1/8 NPT
1/8 NPT
1/4 NPT
1/4 NPT
1/4 NPT
1/4 NPT
1.01
1.00
1.04
1.37
1.69
1.50
1.87
2.625
2.875
2.875
4.500
4.875
5.375
6.375
3.00
3.25
3.38
5.00
5.37
5.87
7.13
0.375
0.375
0.500
0.500
0.500
0.500
0.750
1.91
1.980
2.12
2.99
3.15
3.38
3.67
0.281
0.344
0.344
0.406
0.406
0.531
0.531
0.438
0.516
0.516
0.719
0.719
0.844
0.844
WF
0.909
1.03
1.03
1.28
1.28
1.50
1.50
1.125
1.125
1.125
1.500
1.500
1.500
2.000
1.00
1.00
1.00
1.375
1.375
1.375
1.625
WF
0.909
1.03
1.03
1.28
1.28
1.50
1.50
1.125
1.125
1.125
1.500
1.500
1.500
2.000
2.405
2.535
2.529
3.869
4.25
4.655
5.21
1.00
1.00
1.00
1.375
1.375
1.375
1.625
-.001
-.003
LD Option
Bore
Dia.
1.5
2.0
2.5
3.25
4.0
5.0
6.0
-.001
-.003
ACT-27
ACTUATORS
ACTUATORS
Stop Tube
Enhances the transverse load carrying
capability of a long stroke cylinder by
increasing the distance between the piston
and rod bearing at full extension when
placed on head end. Ideal for those
applications requiring longer strokes or
where additional rod stability is desired.
TO ORDER: Enter option code ST(C) Cap
End or ST(R) Rod End. Specify stop tube
length.
NOTE: ST(R) Alternate design: the stop tube
rod end design changes when the stop tube
exceeds J lengths in the chart.
Bore
J
1-1/2"
1
(38.10)
(25.40)
2"
1
(50.80)
(25.40)
ST(C)
ST(R)
Cap Stop Tube
ST(R)
Head Stop Tube
consisting of Spacer
Tube and Block
J
Stop Tube Length
2-1/2"
1
(63.50)
(25.40)
3-1/4" (82.55)
1.250 (31.75)
4" (101.60)
1.250 (31.75)
5"
(127.00)
1.250 (31.75)
6" (152.40)
1.500 (38.10)
7" (177.80)
1.500 (38.10)
5/8"
95
65
50
43
34
25
20
17
13
11
9
7
170
135
260
115
220
93
180
300
70
135
250
56
110
185
250
48
94
160
220
38
80
130
170
33
64
110
140
26
51
90
115
22
44
75
100
20
39
66
88
18
35
60
79
15
30
52
68
12
26
46
60
10
22
41
52
19
37
48
14
29
41
2-1/2"
260
225
180
155
140
125
110
95
86
79
68
Note: In some cases it may be necessary to use a larger bore cylinder than is required for force in order to obtain an adequate rod diameter.
ACT-28
8"
(203.20)
1.500 (38.10)
Rod End
Connection
Fixed and
Rigidly Guided
.50
Pivoted and
Rigidly Guided
.70
Supported but
not Rigidly Guided
2.00
None
5.00
Head Trunnion
Pivoted and
Rigidly Guided
1.00
Center Trunnion
Pivoted and
Rigidly Guided
1.50
Cap Trunnion
or Clevis
Pivoted and
Rigidly Guided
Mounting
Style
Stroke
Factor
2.00
60
1
75
1
1
135
3
2
1
1
1
Standard
Steel Tie Rods
6.6 ft. lbs.
11 ft. lbs.
13 ft. lbs.
20 ft. lbs.
24 ft. lbs.
40 ft. lbs.
48 ft. lbs.
100 ft. lbs.
150 ft. lbs.
175 ft. lbs.
Stainless Steel
Tie Rods
3.75 ft. lbs.
7.5 ft. lbs.
7.5 ft. lbs.
13-14 ft. lbs.
13-14 ft. lbs.
33 ft. lbs.
33 ft. lbs.
65 ft. lbs.
75 ft. lbs.
87.5 ft. lbs.
ACT-29
ACTUATORS
ACTUATORS
(50.80)
2-1/2" (63.50)
3-1/4" (82.55)
4"
(101.60)
5"
(127.00)
6"
(152.40)
7"
(177.80)
8"
(203.20)
Rod
Inch (mm)
5/8" (15.88)
5/8" (15.88)
1"
(25.40)
5/8" (15.88)
1"
(25.40)
1"
(25.40)
1-3/8" (34.93)
1"
(25.40)
1-3/8" (34.93)
1"
(25.40)
1-3/8" (34.93)
1-3/8" (34.93)
1-3/4" (44.45)
1-3/8" (34.93)
1-3/4" (44.45)
1-3/8" (34.93)
1-3/4" (44.45)
ACT-30
01, 05, 16
1.9
(.86)
2.8 (1.27)
3.4 (1.54)
3.9 (1.77)
4.5 (2.04)
7.3 (3.31)
8.2 (3.72)
9.8 (4.45)
10.8 (4.90)
15.1 (6.85)
16.2 (7.35)
23.5 (16.19)
24.8 (11.27)
32.1 (14.56)
33.4 (15.18)
40.0 (18.14)
47.3 (21.50)
03
2.6 (1.18)
3.9 (.77)
4.4 (2.00)
5.3 (2.40)
5.9 (2.68)
10.8 (4.90)
11.5 (5.22)
14.8 (6.71)
15.5 (7.03)
22.7 (10.30)
23.5 (10.66)
35.6 (16.15)
36.9 (16.77)
32.1 (14.56)
33.4 (15.18)
40.0 (18.14)
41.3 (18.77)
04
2.7
4.0
4.6
5.5
6.1
11.1
12.1
15.1
16.1
23.1
24.1
36.3
37.6
32.1
33.4
40.0
41.3
(.23)
(1.81)
(2.09)
(2.49)
(2.77)
(5.03)
(5.49)
(6.85)
(7.30)
(10.48)
(10.93)
(16.47)
(17.09)
(14.56)
(15.18)
(18.14)
(18.77)
2.1
3.1
3.7
4.1
4.7
7.7
8.7
10.2
11.2
16.1
17.2
24.5
25.8
33.4
34.7
41.3
42.6
06
(.95)
(1.41)
(1.68)
1.86)
(2.13)
(3.49)
(3.95)
(4.63)
(5.08)
(7.30)
(7.80)
(11.11)
(11.73)
(15.15)
(15.77)
(18.73)
(19.36)
Mounting Code
7R, 8R, 09, 60
2.5 (1.13)
3.5 (1.59)
4.1 (1.86)
4.6 (2.09)
5.2 (2.36)
8.9 (4.04)
9.9 (4.50)
11.5 (5.22)
12.5 (5.67)
18.7 (8.48)
19.7 (8.94)
27.3 (12.38)
28.3 (12.86)
33.5 (15.20)
34.8 (15.82)
41.4 (18.78)
42.7 (19.41)
11
2.3
3.3
3.9
4.4
5.1
8.2
9.2
10.9
11.9
17.6
18.6
26.6
27.9
36.8
38.1
45.7
47.0
(1.04)
(1.50)
(1.77)
(2.00)
(2.31)
(3.72)
(4.17)
(4.94)
(5.40)
(7.98)
(8.44)
(12.07)
(12.68)
(16.69)
(17.32)
(20.73)
(21.36)
12
2.8 (1.27)
4.0 (1.81)
4.6 (2.09)
5.3 (2.40)
5.9 (2.68)
11.1 (5.03)
12.1 (5.49)
14.8 (6.71)
15.8 (7.17)
22.2 (10.07)
23.2 (10.52)
35.7 (10.66)
37.0 (16.82)
35.2 (15.97)
36.5 (16.59)
43.0 (19.50)
44.3 (20.14)
15
2.5 (1.13)
3.8 (1.72)
4.4 (2.00)
5.3 (2.40)
6.0 (2.72)
9.7 (4.40)
10.7 (4.85)
13.3 (6.03)
14.3 (6.49)
20.8 (9.43)
21.9 (9.93)
32.1 (14.56)
33.4 (15.18)
32.1 (14.56)
33.4 (15.18)
40.0 (18.14)
41.3 (18.77)
(50.80)
2-1/2" (63.50)
3-1/4" (82.55)
4"
(101.60)
5"
(127.00)
6"
(152.40)
7"
(177.80)
8"
(203.20)
10" (254.00)
12" (304.80)
Rod
Inch (mm)
5/8" (15.88)
5/8" (15.88)
1"
(25.40)
5/8" (15.88)
1"
(25.40)
1"
(25.40)
1-3/8" (34.93)
1"
(25.40)
1-3/8" (34.93)
1"
(25.40)
1-3/8" (34.93)
1-3/8" (34.93)
1-3/4" (44.45)
1-3/8" (34.93)
1-3/4" (44.45)
1-3/8" (34.93)
1-3/4" (44.45)
1-3/4" (44.45)
2"
(50.80)
2"
(50.80)
2-1/2" (63.50)
01, 05, 16
3.1 (1.42)
5.0 (2.27)
5.1 (2.33)
7.2 (3.26)
7.3 (3.32)
11.1 (5.02)
11.3 (5.11)
20.3 (9.22)
20.5 (9.31)
34.6 (15.72)
34.8 (15.81)
53.1 (24.09)
53.3 (24.21)
73.0 (33.14)
73.3 (33.26)
92.3 (41.88)
92.5 (42.00)
179.9 (81.66)
180.0 (81.72)
288.0 (130.75)
288.5 (130.98)
03
04
3.7 (1.67) 3.7 (1.67)
5.9 (2.67) 5.9 (2.67)
6.0 (2.73) 6.0 (2.73)
8.1 (3.68) 8.1 (3.68)
8.3 (3.75) 8.3 (3.75)
14.3 (6.50) 14.3 (6.50)
14.5 (6.59) 14.5 (6.59)
24.9 (11.29) 24.9 (11.29)
25.1 (11.38) 25.1 (11.38)
40.4 (18.33) 40.4 (18.33)
40.6 (18.42) 40.5 (18.42)
63.9 (29.02) 63.9 (29.02)
64.2 (31.41) 64.2 (31.41)
73.0 (33.14) 73.0 (33.14)
73.3 (33.26) 73.3 (33.26)
92.3 (41.88) 92.3 (41.88)
92.5 (42.00) 92.5 (42.00)
179.9 (81.66) 179.9 (81.66)
180.1 (81.76) 180.1 (81.76)
288.0 (130.75) 288.0 (130.75)
288.5 (130.98) 288.5 (130.98)
06
3.2 (1.48)
5.2 (2.35)
5.3 (2.42)
7.4 (3.35)
7.5 (3.41)
11.4 (5.16)
11.6 (5.25)
20.6 (9.36)
20.8 (9.45)
35.2 (15.97)
35.4 (16.06)
54.3 (24.66)
54.6 (24.78)
74.0 (33.60)
74.3 (33.71)
93.6 (42.50)
93.9 (42.62)
181.6 (82.46)
181.8 (82.55)
289.0 (131.21)
289.5 (131.43)
Mounting Code
07, 08, 09
11
12
3.8 (1.73) 4.9 (2.24) 3.9 (1.76)
5.7 (2.58) 7.6 (3.46) 5.8 (2.61)
5.8 (2.64) 7.8 (3.52) 5.9 (2.67)
7.9 (3.57) 10.3 (4.68) 7.9 (3.60)
8.0 (3.64) 10.5 (4.74) 8.1 (3.66)
11.7 (5.30) 16.8 (7.63) 12.6 (5.70)
11.9 (5.39) 17.0 (7.72) 12.8 (5.79)
20.8 (9.45) 27.4 (12.43) 21.8 (9.90)
21.0 (9.54) 27.6 (12.52) 22.0 (9.99)
38.0 (17.25) 43.2 (19.60) 36.3 (16.49)
38.2 (17.34) 43.4 (19.69) 36.5 (16.58)
56.4 (25.59) 65.3 (29.65) 57.1 (25.93)
56.7 (25.72) 65.6 (29.77) 57.4 (26.05)
76.5 (34.73) 96.0 (43.58) 85.0 (38.59)
76.8 (34.85) 96.3 (43.70) 85.3 (38.71)
95.8 (43.47) 120.0 (54.48) 97.8 (44.41)
96.0 (43.59) 120.3 (54.60) 98.1 (44.52)
184.3 (83.65) 228.0 (103.51) 186.1 (84.50)
184.5 (83.74) 228.2 (103.61) 186.3 (84.59)
293.0 (133.02) 380.0 (172.52) 297.0 (134.84)
293.5 (133.25) 380.5 (172.75) 297.5 (135.20)
73.3 (33.26)
96.3 (43.70) 2.01 (.91)
92.3 (41.88)
120.0 (54.48) 2.18 (.99)
92.5 (42.00)
120.3 (54.60) 2.44 (1.11)
179.9 (81.66)
228.0 (103.51) 3.43 (1.56)
180.1 (81.76)
228.2 (103.61) 3.64 (1.65)
288.0 (130.75)
380.0 (172.52) 4.12 (1.87)
288.5 (130.98)
380.5 (172.75) 4.62 (2.10)
Series J
Extend Retract
3-1/4", 4"
10"
12"
ACT-31
ACTUATORS
ACTUATORS
Technical data
Medium:
Filtered compressed air
Operating temperature:
-25F to 140F (-5C to 60C)
With Viton Seals: -23F to 300F
(-5C to 150C)
Operating Pressure:
Minimum 7 psi (.5 bar)
Maximum 140 psi (9.7 bar)
Bore Sizes: 1-1/2", 2", 2-1/2",
3-1/4", 4"
Rod Diameter: 5/8" diameter
piston rod in 1-1/2", 2", 2-1/2"
bore
1" diameter piston rod in 3-1/4"
and 4" bore
Lubrication: None required
Norgren Air Cylinders are rated for
no lube added service.
Materials
Head and End Caps:
Die cast aluminum painted for
corrosion protection.
Tube: Aluminum alloy, hard coat
anodized
Piston: machined high-strength
aluminum casting.
Rod Bearing: clean metal teflon
composite
Seals: nitrile rod seal/wiper, nitrile
piston seals, nitrile tube end seals
Tie Rods: Nickel plated high-tensile
strength steel.
11
1
9
8
10
NFPA MF1
ACT-32
NFPA MF2
NFPA MP1
NFPA MP2
1
2
3
Single rod
C
D
E
F
G
48" max.*
Blank
C
E
G
J
M
P
S
NEN
C x 4
E MP1 V
7
Additional Options
Viton Seals
Rod Extension
Non-standard piston rod thread
Piston Rod thread extension
Stainless steel piston rod
Stainless steel tie rods
Mounting Options**
MS4 (standard)
Head Rectangular Flange
Cap Rectangular Flange
Detachable Cap Clevis
Cap Fixed Clevis
Tie Rod Extended both ends
Tie Rod Extended Cap
Tie Rod Extended Head
Side Lug Mount
V
RX
T
TX
SS
S
blank
MF1
MF2
MP2
MP1
MX1
MX2
MX3
MS2
ACT-33
ACTUATORS
ACTUATORS
P + Stroke
WF
EE NPT (2)
B Bushing
MM
AA
DD Thds.
4 Places
Both Ends
KK
Thds
C
A
D
(Flats)
NT Tap
ND Depth
VF
TN
LB + Stroke
SN + Stroke
XT
R
E Sq.
ZJ + Stroke
B
KK
Thds.
B
CC
Thds.
MM
D
Across
Flats
Bore
Rod
A
AA
B
BA
C
CC
D
DD
E
EE
G
J
KK
LB
MM
NT
ND
P
R
SN
TN
VF
WF
XT
Y
ZJ
ACT-34
B
KK
Thds.
A Deep
MM
MM
A
C
Type 1 Solid
Type 2 Solid
Type 3 Female
(Small Male)
(Intermediate Thread
Male Optional)
(Optional)
1-1/2"
5/8"
0.750
2.020
1.124
1.125 (28.58)
0.375 (9.53)
1/2-20
0.562 (14.27)
1/4-28
2.000 (50.80)
3/8
1.260 (32.00)
1.010 (25.65)
7/16-20
3.625 (92.08)
0.625 (15.88)
1/4-20
0.281 (7.14)
2.360 (59.94)
1.430 (36.32)
2.250 (57.15)
0.625 (15.88)
0.625 (15.88)
1.000 (25.40)
1.938 (49.23)
1.710 (43.43)
4.750 (120.65)
2"
5/8"
0.750 (19.05)
2.600 (66.04)
1.124 (28.55)
1.125 (28.58)
0.375 (9.53)
1/2-20
0.562 (14.27)
5/16-24
2.500 (63.50)
3/8
1.260 (32.00)
1.060 (26.92)
7/16-20
3.625 (92.08)
0.625 (15.88)
5/16-18
0.438 (11.13)
2.400 (60.96)
1.840 (46.74)
2.250 (57.15)
0.875 (22.23)
0.625 (15.88)
1.000 (25.40)
1.938 (49.23)
1.710 (43.43)
4.750 (120.65)
2-1/2"
5/8"
0.750 (19.05)
3.100 (78.74)
1.124 (28.55)
1.125 (28.58)
0.375 (9.53)
1/2-20
0.562 (14.27)
5/16-24
3.000 (76.20)
3/8
1.300 (33.02)
1.060 (26.92)
7/16-20
3.750 (95.25)
0.625 (15.88)
3/8-16
0.593 (15.06)
2.480 (62.99)
2.190 (55.63)
2.375 (60.33)
1.250 (31.75)
0.625 (15.88)
1.000 (25.40)
1.938 (49.23)
1.750 (44.45)
4.870 (123.95)
3-1/4"
1"
1.125 (28.58)
3.900 (99.06)
1.500 (38.07)
1.250 (28.58)
0.500 (12.70)
7/8-14
0.875 (22.23)
3/8-24
3.750 (95.25)
1/2
1.570 (39.88)
1.180 (29.97)
3/4-16
4.250 (107.95)
1.000 (25.40)
1/2-13
0.625 (15.88)
2.720 (69.09)
2.760 (70.10)
2.625 (66.68)
1.500 (38.10)
0.875 (22.23)
1.375 (34.93)
2.438 (61.93)
2.340 (59.44)
5.820 (147.83)
4"
1"
1.125 (28.58)
4.700 (119.38)
1.499 (38.07)
1.250 (28.58)
0.500 (12.70)
7/8-14
0.875 (22.23)
3/8-24
4.500 (114.30)
1/2
1.570 (39.88)
1.180 (29.97)
3/4-16
4.250 (107.95)
1.000 (25.40)
1/2-13
0.625 (15.88)
2.720 (69.09)
3.320 (84.33)
2.625 (66.68)
2.063 (52.40)
0.875 (22.23)
1.375 (34.93)
2.438 (61.93)
2.340 (59.44)
5.820 (147.83)
FB Holes (4)
FB Holes (4)
E R
E R
TF
Bore
E
F
FB
R
TF
UF
W
1-1/2"
2.000
.375
.313
1.428
2.750
3.375
.625
2"
2.500
.375
.375
1.838
3.375
4.125
.625
2-1/2"
3.000
.375
.375
2.192
3.875
4.625
.625
3-1/4"
3.750
.625
.438
2.758
4.688
5.500
.750
4"
4.500
.625
.438
3.323
5.438
6.250
.750
Bore
E
F
FB
R
TF
UF
ZF
1-1/2"
2.000
.375
.313
1.428
2.750
3.375
5.000
2"
2.500
.375
.375
1.838
3.375
4.125
5.000
2-1/2"
3.000
.375
.375
2.192
3.875
4.625
5.125
TF
ZF + Stroke
UF
UF
3-1/4"
3.750
.625
.438
2.758
4.687
5.500
6.250
4"
4.500
.625
.438
3.323
5.438
6.250
6.250
Supplied with
Standard Pin
MP1 Mount
LR
CD
MR
LB + Stroke
L
CW
CB
CW
XC + Stroke
MP2 Mount
Supplied with
Standard Pin
LR
CD
MR
L
XD + Stroke
FL
CB
CW
CW
Bore
CB
CD
CW
L
LB
LR
MR
XC
Bore
CB
CD
CW
FL
L
LR
M
MR
XD
1-1/2"
0.750
0.500
0.500
0.750
3.625
0.625
0.625
5.375
1-1/2"
0.750
0.500
0.500
1.125
0.750
0.750
0.500
0.625
5.750
2"
0.750
0.500
0.500
1.125
0.750
0.750
0.500
0.625
5.750
2"
0.750
0.500
0.500
0.750
3.625
0.625
0.625
5.375
2-1/2"
0.750
0.500
0.500
1.125
0.750
0.750
0.500
0.625
5.875
3-1/4"
1.250
0.750
0.625
1.875
1.250
1.250
0.875
0.875
7.500
2-1/2"
0.750
0.500
0.500
0.750
3.750
0.625
0.625
5.500
3-1/4"
1.250
0.750
0.625
1.250
4.250
0.875
0.875
6.875
4"
1.250
0.750
0.625
1.250
4.250
0.875
0.875
6.875
4"
1.250
0.750
0.625
1.875
1.250
1.250
0.750
0.875
7.500
AA
C
R
Bore
AA
BB
C
DD
K
R
VF
ZB
VF
BB
1-1/2"
2.020
1.000
0.375
1/4 28
0.250
1.428
0.625
4.875
2"
2.600
1.125
0.375
5/16 24
0.313
1.838
0.625
4.938
2-1/2"
3.100
1.125
0.375
5/16 24
0.313
2.192
0.625
5.063
BB
ZB + Stroke
3-1/4"
3.900
1.375
0.500
3/8 24
0.375
2.758
0.875
6.000
4"
4.700
1.375
0.500
3/8 24
0.375
3.323
0.875
6.000
ACT-35
ACTUATORS
MS2 Mount
SB thru Dia.
SC - C Bore
SD Deep
SH
ST
SU
SU
TS
US
SY
SL
SS + Stroke
XS
ZB + Stroke
Bore
SB
SC
SD
SH
SL
SY
SS
ST
SU
TS
US
XS
ZB
1-1/2"
0.438
0.690
0.030
1.000
1.875
0.940
2.875
0.620
0.940
2.750
3.500
1.375
5.190
2"
0.438
0.690
0.030
1.250
1.875
0.940
2.875
0.620
0.940
3.250
4.000
1.375
5.190
2-1/2"
0.438
0.690
0.030
1.500
1.875
0.940
3.000
0.750
0.940
3.750
4.500
1.375
5.310
3-1/4"
0.563
0.800
0.030
1.875
2.500
1.250
3.250
1.000
1.250
4.750
5.750
1.875
6.380
4"
0.563
0.800
0.030
2.250
2.500
1.250
3.250
1.000
1.250
5.500
6.500
1.875
6.380
CD
ER Radius
CW
CD
CB
ER Radius
CB
CW
CD
CD
CD
L
CE
CE
A
KK Thds.
Kit number
NENC-RC
NENF-RC
KK Thds.
CH Across
Hex Flats
KK
7/16-20
3/4-16
CB
0.750
1.250
CD.
0.500
0.750
CE
CH
1.500 1.000
2.375 1.250
CW
0.500
0.625
ER
0.500
0.750
L
0.750
1.250
Kit number
NENC-RE
NENF-RE
KK
7/16-20
3/4-16
A
0.750
1.125
CB
0.750
1.250
CD
CE
0.500 1.500
0.750 2.063
ER
0.563
0.875
RC and RE rod accessories come complete with pivot pin and retaining clips.
ACTUATORS
FB Holes (4)
E R
SL
ST
SU
SY
Kit number
MK-NENC-MS2
MK-NEND-MS2
MK-NENE-MS2
MK-NENF-MS2
MK-NENG-MS2
TF
TS
US
SB
0.41
0.41
0.41
0.52
0.52
SC
0.69
0.69
0.69
0.80
0.80
ACT-36
SD
0.03
0.03
0.03
0.03
0.03
SY
0.94
0.94
0.94
1.25
1.25
ST
0.62
0.62
0.75
1.00
1.00
UF
SU
0.94
0.94
0.94
1.25
1.25
TS
2.75
3.25
3.75
4.75
5.50
US
3.50
4.00
4.50
5.75
6.50
Kit number
MK-NENC-MF1
MK-NEND-MF1
MK-NENE-MF1
MK-NENF-MF1
MK-NENG-MF1
UF
3-3/8
4-1/8
4-5/8
5-1/2
6-1/4
TF
2-3/4
3-3/8
3-7/8
4-11/16
5-7/16
FB
5/16
3/8
3/8
7/16
7/16
E
2.00
2-1/2
3.00
3-3/4
4-1/2
R
1.43
1.84
2.19
2.76
3.32
F
3/8
3/8
3/8
5/8
5/8
EB (eye bracket)
DD
4 Places
D
G
LR Radius
CD
DD
LR
E BA
CD
M Radius
MR
CB
BA
FL
FL
NENC-EB
1.625
0.750
0.500
0.406
2.500
0.375
1.125
0.750
0.500
NENF-EB
2.563
1.250
0.750
0.531
3.500
0.625
1.875
1.250
0.750
Kit number
MK-NENC-MP1
MK-NEND-MP1
MK-NENE-MP1
MK-NENF-MP1
MK-NENG-MP1
CD
0.502
0.502
0.502
0.752
0.752
FL
0.75
0.75
0.75
1.25
1.25
CB
CW
F
0.38
0.38
0.38
0.63
0.63
B
0.76
0.76
0.76
1.26
1.26
CW
0.50
0.50
0.50
0.62
0.62
CW
D
2.00
2.50
3.00
3.75
4.50
MR
0.62
0.62
0.62
0.87
0.87
G
1.43
1.84
2.19
2.77
3.32
LR
0.62
0.62
0.62
0.87
0.87
DD
0.28
0.34
0.34
0.41
0.41
MP1 and MP2 kits come complete with mounting hardware, pivot pin and retaining clips.
DD
DD
LR
CD
A
ER
F
FL
CB
CW
Kit number
MK-NENC-MP2
MK-NEND-MP2
MK-NENE-MP2
MK-NENF-MP2
MK-NENG-MP2
CD
0.502
0.502
0.502
0.752
0.752
FL
1.13
1.13
1.13
1.88
1.88
F
0.38
0.38
0.38
0.63
0.63
P (pin)
CW
B
0.76
0.76
0.76
1.26
1.26
CW
0.50
0.50
0.50
0.62
0.62
D
2.00
2.50
3.00
3.75
4.50
ER
0.62
0.62
0.62
0.87
0.87
G
1.43
1.84
2.19
2.77
3.32
DD
0.28
0.34
0.34
0.41
0.41
Kit number
MK-NENC-MX1
MK-NEND-MX1
MK-NENE-MX1
MK-NENF-MX1
MK-NENG-MX1
Kit number
MK-NENC-MX2
MK-NEND-MX2
MK-NENE-MX2
MK-NENF-MX2
MK-NENG-MX2
E
CD
LP
LH
NFPA Pin
CD
E
LH
LP
NEN-5
0.500
0.109
2.094
1.875
NEN-7
0.750
0.125
2.875
2.625
Kit number
MK-NENC-MX3
MK-NEND-MX3
MK-NENE-MX3
MK-NENF-MX3
MK-NENG-MX3
B
1.375
1.500
1.500
1.937
1.937
B
1.375
1.500
1.500
1.937
1.937
B
N/A
N/A
N/A
N/A
N/A
ACT-37
ACTUATORS
ACTUATORS
Unit-Air Assembly
Description:
Typical Applications:
Sectors/Industries:
Features & Benefits:
Norgren Offering:
Multi-Position Cylinder
Description:
Typical Applications:
Sectors/Industries:
Features & Benefits:
Norgren Offering:
Position Feedback
Description:
Typical Applications:
Sectors/Industries:
Features & Benefits:
Norgren Offering:
ACT-38
Baghouse Cylinder
Description:
package
Typical Applications:
Sectors/Industries:
Features & Benefits:
Norgren Offering:
Norgren Offering:
Value Added
From Aesthetics, to Functionality, to Custom Coatings and
Designs - Let Norgren engineer a solution that works for you!
ACT-39
ACTUATORS
ACTUATORS
LS Series Thrusters
Improved load carrying qualities
Ecology seal improves load dampening
Alignment coupler installed in tooling plate for self-alignment of
cylinder rod to tooling plate connection prevents binding.
Technical data
NFPA tie rod cylinder
Bore sizes: 1-1/2" and 2"
Operating pressure: 250 psi max.
Temperature range: -20F to 200F (-29C to 107C)
Porting: 3/8 NPT
Ecology piston seals available (fixed cushion, adjustable or extra
long Decel-Air" cushions)
Universal mounting (sleeve nut construction): Ease of cylinder
removal (modular)
Decel-Air Cushions
Norgren's Decel cushioned cylinder was designed for
applications where high velocity, low mass, material function or
machine function is required, and where the kinetic energy to
be absorbed during cushioning exceeds the parameters of
standard cylinders equipped with Ecology piston seals and
fixed or adjustable cushions. Decel cushions employ longerthan-standard air cushions to assist our Impact Dampening
Piston Seal.
Velocity
In./Sec
6
12
18
24
30
1-1/2" Bore
Load (LBS.)
Load (LBS.)
Short Body
Long Body
Standard
Oversize
Standard
Oversize
Guide Shaft
Guide Shaft
Guide Shaft
Guide Shaft
151.3
149.1
150.8
148.2
34.1
31.9
33.6
31.0
12.4
10.2
11.9
9.3
4.9
2.7
4.44
1.8
1.3
0
0
0
2.0" Bore
Load (LBS.)
Load (LBS.)
Short Body
Long Body
Standard
Oversize
Standard
Oversize
Guide Shaft
Guide Shaft
Guide Shaft
Guide Shaft
267.0
261.9
265.7
259.4
59.6
54.5
58.3
52.0
7.8
16.1
20.0
13.6
7.8
2.7
6.5
0.2
1.5
0
0.2
0.0
*The weight of the cylinder piston has been deducted from the figures shown above.
Note: The use of Viton Seals limits the absorption of the impact dampening seals by 50%.
NOTE: The weight of a tooling plate, guide rods, and 1 extend and 1 retract stop collar has been added.
(Guide rod weight is basd on a 6.0" stroke cylinder.)
ACT-40
Dimensional data
Dimension
BD + stroke
BC + stroke
B
X
V
W
E
GG
A
F
C + stroke
D + stoke
N
M.001
HH
Y .001
P
S
L
Q
EE
WW
FF
F
HH
.125
G
J
K
JJ
TM4*
TM3*
TM1*
TM2*
*Dimensions apply to
TM option only
LS 3 A 3 3
S S C
6 7 8
2 3 4 5
1 - Product
LS
Linear slide unit
2 - Size
3
1-1/2"
4
2"
3 - Cylinder Type
A
aluminum (NFPA tie rod)
EA
aluminum (NFPA tie rod Ecology Seal
J
steel (NFPA tie rod)
EJ
steel (NFPA tie rod Ecology Seal
4- Cushions - Extend Stroke
3
non-cushioned*
5
fixed cushions
7
adjustable cushions**
9
decel adjustable cushions**
5 - Cushions - Retract Stroke
3
non-cushioned*
5
fixed cushions
7
adjustable cushions**
9
decel adjustable cushions**
A
AA
B
BD
C
BC
D
E
EE
F
FF
G
GG
H
HH
J
JJ
K
L
M
N (Standard)
N (Oversize)
P
Q
R
S
T
TM1*
TM2*
TM3*
TM4*
V
W
WW
X
Y
Z
ZZ
- Stroke - Options
Maximum Stroke
size 3 (1-1/2" bore) size 4 (2" bore)
short body
18"
22"
long body
24"
28"
Options
AE = stroke adjustment (collar & bumper) - extend stroke
AR = stroke adjustment (collar & bumper) - retract stroke
9 - Guide Rod Diameter
CR = corrosion resistance (includes linear slide and cylinder)
S
standard
GL = guide rod lubrication (includes oiler cups installed)
O
oversize
GM = guide rod lubrication modification for oiler cups
L() = non-standard port location
8 - Guide Rod Bearing Type
ME = shock absorber mounting block - extend stroke
C
composite
MR = shock absorber mounting block- retract stroke
R
Roller +, ++
N() = non-standard adjustable cushion needle location
P() = non-standard port size
7 - Slide Body Length
(down one size = 1/4 NPT, up one size = 1/2 NPT)
S
short
PS = magnetic piston (cylinder)
L
long
PX() = tooling plate extension
TM = side tapped mounting
6 - Slide Body Width
WC = linear thruster assembly without cylinder
S
standard
WS = replacement cylinder without slide
V = high temperature viton seals
* Non-cushioned cylinders will have U-cup seals as standard.
Ecology seals are not available as non-cushioned.
** Standard cushion adjustment location is side 1 and adds 1" to the
overall length of the cylinder per end with standard port sizes.
+ Roller bearings are not available with oversized guide rods.
++ Roller bearing not available with CR (corrosion resistance) option.
ACT-41
ACTUATORS
LS Series Thrusters
ACTUATORS
LS Series Thrusters
Load and Deflection Graphs
1-1/2" bore, 3/4 inch guide rod, short body, composite bearing
1-1/2" bore, 3/4 inch guide rod, short body, roller bearing
ACT-42
1-1/2" bore, 3/4 inch guide rod, long body, composite bearing
ACT-43
ACTUATORS
LS Series Thrusters
ACTUATORS
LS Series Thrusters
Load and Deflection Graphs
2.0" bore, 1 inch guide rod, long body, composite bearing
2.0" bore, 1-3/8 inch guide rod, long body, composite bearing
ACT-44
2.0" bore, 1-3/8 inch guide rod, short body, composite bearing
ACT-45
ACTUATORS
LS Series Thrusters
ACTUATORS
Series SS Actuators
Series D Low Friction Option
1-1/8" bore size
Materials:
Head and End Caps: 304 stainless steel
Tube: 304 stainless steel
Piston Rod: hard chrome plated 303
stainless steel
Piston: Aluminum alloy with Teflon
composite wearband
Rod Bearings: 304 stainless steel with
Teflon composite wearband
Seals: urethane rod seal and wiper,
nitrile piston seals
Tie Rods: 303 stainless steel
Options selector
-/
Series
S
Series SS
D
Series D*
Single
Bore Double
Rod End
Rod End
B
1-1/8'' P
Full Strokes Inches in
0" Stroke
00
1" Stroke
01
2" Stroke
02
3" Stroke
03
4" Stroke
04
5" Stroke
05
6" Stroke
06
...
...
99" Stroke
Special
No Options
Magnetic
Piston Only
Special
00
90
98
Optional Seals
No Option
Viton Seals
Air/Oil Seal
Metallic Rod Scraper
Ecology piston seal
Special
99
XX
Cushions
Needle Position
No Cushions
Head Only
Cap Only
Head and Cap
Fixed
Special
1
B
G
N
A
1
3
5
6
X
2 3
A
C D
H J
M P
U
X
4
E
K
R
Standard position
Ports
Position
Standard
Special
1 2
A B
X
3
C
4
D
Standard position
Oversized
Male KK
Male CC
Female XX
H
J
M
Mounting Options
Basic (MX0)
01
Bolt Thru (MS8)
03
Front Flange (MF7) 04
Rear Flange (MF2) 05
ACT-46
17
22
30
XX
P + Stroke
Y
CC MM
Thds.
A
C
D
(Flats)
RM
E Sq.
G
LB + Stroke
ZB + Stroke
CC Thds.
D
Across
Flats
XX Thds.
A Deep
KK Thds.
Dimension
Rod Std.
O.S.
A
Std.
O.S.
C
CC
Std.
O.S.
D
Std.
O.S.
E
EE
G
J
K
KK
Std.
O.S.
LB
MM
Std.
O.S.
P
RM
Std.
O.S.
V
XX
Std.
O.S.
Y
ZB
Style B & J
Style A & H
Style D & M
(Standard Male)
(Optional Male)
(Optional Female)
01 (MXO) Basic
3/8"
1/2"
.625
.750
.250
3/8 - 24
1/2 - 20
.312
.437
1.500
.125
.875
.625
.400
5/16 - 24
7/16 - 20
2.250
.370
.495
1.375
.750
1.000
.125
1/4 - 28
3/8 - 24
.938
2.625
.750
1.000
.125
1/4 - 28
3/8 - 24
2.625
.125
1/4 - 28
3/8 - 24
.938
2.625
5/16 - 24
7/16 - 20
2.250
.370
.495
1.375
.125
1/4 - 28
3/8 - 24
.938
ACT-47
ACTUATORS
Series SS Actuators
ACTUATORS
Series SS Actuators
1-1/8" bore size
1-1/8" Cylinder with 03 (MS8) Bolt Thru
DB Hole Thru
TB C'Bore for
SB Screws
3 Places
SD + Stroke
XB
.375 (9.53)
03 (MS8)
DB
DN
SB
SD
XB
DN
Bolt Thru
.203
1.000
#10
1.750
.625
E R
W
FH
TF
UF
ZB + stroke
FH
TF
UF
ZF + Stroke
L
XC + Stroke
ACT-48
NT Tap
XT
TK Deep
SN + Stroke
RT Thds.
on BC
Bolt Circle
RE
P + Stroke
Y
MM
D
(Flats)
RM
E Sq.
LB + Stroke
ZB + (2 x Stroke)
CB
ER Radius
CD
CA
A
KK Thds.
A Deep
A
CA
CB
CD
ER
H
KK
N
S-97-225*
.437
.875
.375
.375
.375
.750
3/8-24
.219
DD
DB c'bore
TB deep (4 plc)
CD M Radius
E
BA
LR
Radius
FL
Pivot pin
CD
LH
LP
CD
LP
.375
1.250
1.032
LH
HSq.
S-97-225A
.437
.875
.375
.375
.375
.750
1/2-20
.312
CW CB CW
BA
E
Clevis bracket
BA
CB
CD
CW
DB
DD
E
F
FL
LR
M
TB
1.125
.375
.375
.250
.328
.203
1.50
.500
1.125
.625
.375
.260
F Shank
G Across Flats
A Thds.
A Thds.
B
.062
radial float
2 spherical
motion
H
Across
Flats
E
D
Made of 303 Stainless Steel, the Rod Alignment Coupler allows 1/16" of radial float
and 2 of spherical movement.
This prevents cylinder binding due to misalignment thus extending bearing and seal
life, and permits greater tolerance between the center line of the cylinder and mating
part for simplified installation.
ACT-49
ACTUATORS
Series SS Actuators
ACTUATORS
Series SS NFPA
Interchangeable Actuators
Series D Low Friction Option
1-1/2" to 8" bore sizes
Precision machined 300 Series
stainless steel components.
Cylinders rated to 250 PSI air,
400 PSI hydraulic (non-shock).
Designed for non-lube service.
Switches available on all bore sizes.
Technical data
Operating Temperatures:
Series SS
-20F to 200F
(-29C to 93C)
Series D
-20F to 250F
(-29C to 121C)
w/Viton Seals -20F to 400F
(-29C to 204C)
Operating Pressure:
250 PSIG Air (17.2 Bar)
400 PSIG Hydraulic (27.6 Bar)
non-shock
Bore Sizes:
1-1/8", 1-1/2", 2", 2-1/2", 3-1/4", 4",
5", 6", 8"
Supply:
Filtered compressed air to 250 PSI
Petroleum based hydraulic fluid to 400
PSI
Lubrication: None required
Norgren Air Cylinders are rated for no lube added
service. All internal components are lubricated at
time of assembly with a Teflon based grease.
Materials:
Head and End Caps: 304 stainless steel
Tube: 304 stainless steel
Piston Rod: hard chrome plated 303
stainless steel
Piston: Aluminum alloy with Teflon
composite wearband
Rod Bearings: 304 stainless steel with
Teflon composite wearband
Seals: urethane rod seal and wiper,
nitrile piston seals
Tie Rods: 303 stainless steel
Options selector
SC04J-A01-AA600
Series
S
D
Bore
1-1/2"
2"
2-1/2"
3-1/4"
4"
5"
6"
8"
Single
Rod End
C
D
E
F
G
L
J
M
Series SS
Series D*
Double
Rod End
Q
R
S
T
U
Y
W
Z
Cushions
Needle Position
No Cushions
Head Only
Cap Only
Head and Cap
Fixed
Special
1
B
G
N
A
1
3
5
6
X
2 3
A
C D
H J
M P
U
X
H
J
K
M
N
1 2
A B
E G
X
E
K
R
3
C
H
4
D
J
Standard position
*NFPA
Mounting Options
Basic (MX0)
01
Bottom Tap (MS4)
02
Front Flange (MF1)
04
Rear Flange (MF2)
05
Cap Fixed Clevis (MP1) 06
ACT-50
Standard position
99
XX
Oversized
Male KK
Male CC
Full Dia. Thd.
Female XX
Studded
00
90
Optional Seals
No Option
Viton Seals
Air/Oil Seal
Metallic Rod Scraper
Ecology piston seal
Special
Ports
Position
Standard
Oversized*
Special
No Options
Magnetic piston
4
6
7
9
10
11
7
8
13
12
14
Series D
Series D cylinders are designed for extremely smooth stroke performance on applications requiring very slow extension and/or retraction speeds. They
are identical to the Series SS in design, function and dimensions, but have ELF carboxylated nitrile piston seals, rod seals, and rod wipers. ELF
carboxylated nitrile is a blend of Teflon and other low friction additives that are molded into the substrate of the base seal material. Incorporating this
compound in the dynamic seals of the cylinder results in diminished friction, lower breakaway and superior stroke performance.
Features:
Extra smooth performance throughout the entire stroke of the cylinder. NFPA interchangeable.
Cylinders rated to 250 PSI air.
ACT-51
ACTUATORS
Series SS NFPA
Interchangeable Actuators
ACTUATORS
Series SS NFPA
Interchangeable Actuators
1-1/2" to 8" bore sizes
Standard Cylinder Dimensions
E NPT (2)
B Bushing
P + Stroke
MM
KK
Thds.
A
D
RE
VF
E Sq.
LB + Stroke
ZB + Stroke
KK Thds.
D
Across
Flats
A
C
B +.000
-.002
C
CC
D
E
EE
FF
G
J
K
KK
LB
P
RE
VF
XX
Y
ZB
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
ACT-52
XX
Thds.
VF
11/2"
5/8"
1"
0.75
1.125
1.125
1.500
0.375
0.5
7/16 20
7/8 14
0.5
0.812
2
0.25
0.375
5/8 18
1 14
1.5
1
0.469
1/2 20
3/4 16
3.625
2.125
1.43
0.625
0.875
7/16 20
3/4 16
2
2.375
5.094
5.469
VF
2"
5/8"
1"
0.75
1.125
1.125
1.500
0.375
0.5
7/16 20
7/8 14
0.5
0.812
2.5
0.25
0.375
5/8 18
1 14
1.5
1
0.531
1/2 20
3/4 16
3.625
2.125
1.84
0.625
0.875
7/16 - 20
3/4 16
2
2.375
5.156
5.531
A
C
(Small Male)
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
B
FF
Thds.
XX
Thds.
A Deep
Style A & H
Bore
Rod
(MM)
A
CC
Thds.
VF
C
VF
VF
Style B & J
Style D & M
Style C & K
(Optional Male)
(Small Female)
(Optional Full
Diameter Threads)
21/2"
5/8"
1"
0.75
1.125
1.125
1.500
0.375
0.5
7/16 20
7/8 14
0.5
0.812
3
0.25
0.375
5/8 18
1 14
1.5
1
0.531
1/2 20
3/4 16
3.75
2.25
2.19
0.625
0.875
7/16 - 20
3/4 16
2
2.375
5.281
5.656
31/4"
1"
1-3/8"
1.125
1.625
1.500
2.000
0.5
0.625
7/8 14
1-1/4 12
0.812
1.125
3.75
0.375
0.5
1 14
1-3/8 12
1.75
1.25
0.625
3/4 16
1 14
4.25
2.625
2.76
0.875
1
3/4 - 16
1 14
2.437
2.687
6.25
6.5
4"
1"
1-3/8"
1.125
1.625
1.500
2.000
0.5
0.625
7/8 14
1-1/4 12
0.812
1.125
4.5
0.375
0.5
1 14
1-3/8 12
1.75
1.25
0.625
3/4 16
1 14
4.25
2.625
3.32
0.875
1
3/4 - 16
1 14
2.437
2.687
6.25
6.5
5"
1"
1-3/8"
1.125
1.625
1.500
2.000
0.5
0.625
7/8 14
1-1/4 12
0.812
1.125
5.5
0.375
0.5
1 14
1-3/8 12
1.75
1.5
0.83
3/4 16
1 14
4.5
2.875
4.1
0.875
1
3/4 - 16
1 14
2.437
2.687
6.705
6.955
Style E & N
(Optional Studded)
6"
1-3/8"
1-3/4"
1.625
2.000
2.000
2.375
0.625
0.75
1-1/4 12
1-1/2 12
1.125
1.5
6.5
0.5
0.75
1-3/8 12
1-3/4 12
2
1.5
0.83
1 14
1-1/4 12
5
3
4.88
1
1.125
1 - 14
1-1/4 12
2.875
3.125
7.455
7.705
8"
1-3/8"
1-3/4"
1.625
2.000
2.000
2.375
0.625
0.75
1-1/4 12
1-1/2 12
1.125
1.5
8.5
0.5
0.75
1-3/8 12
1-3/4 12
2
1.5
1
1 14
1-1/4 12
5.125
3.125
6.435
1
1.125
1 - 14
1-1/4 12
2.875
3.125
7.75
8
ACTUATORS
Series SS NFPA
Interchangeable Actuators
1-1/2" to 8" bore sizes
04 (MF1) Front Flange
FB
Bore
NT
SN
TK
TN
XT Std.
O.S.
SN + Stroke
NT Tap XT
TK Deep
TN
1-1/2"
1/4-20
2.250
.375
.625
1.937
2.312
2"
5/16-18
2.250
.500
.875
1.937
2.312
2-1/2"
3/8-16
2.375
.625
1.250
1.937
2.312
3-1/4"
1/2-13
2.625
.750
1.500
2.437
2.687
4"
1/2-13
2.625
.750
2.062
2.437
2.687
5"
5/8-11
2.875
1.000
2.687
2.437
2.687
TF
UF
6"
3/4-10
3.125
1.125
3.250
2.812
3.062
Bore
E
FB
G
F
R
TF
UF
W Std.
O.S.
8"
3/4-10
3.250
1.125
4.500
2.812
3.062
1-1/2"
2.000
.312
1.500
.375
1.430
2.750
3.375
.625
1.000
2"
2.500
.375
1.500
.375
1.840
3.375
4.125
.625
1.000
2-1/2"
3.000
.375
1.500
.375
2.190
3.875
4.625
.625
1.000
3-1/4"
3.750
.437
1.750
.625
2.760
4.687
5.500
.750
1.000
4"
4.500
.437
1.750
.625
3.320
5.437
6.250
.750
1.000
5"
5.500
.562
1.750
.625
4.100
6.625
7.625
.750
1.000
6"
6.500
.562
2.000
.750
4.880
7.625
8.625
.875
1.125
CD
XC + Stroke
M
CW
Bore
CB
CD
CW
L
M
XC Std.
O.S.
1-1/2"
.750
.500
.500
.750
.50
5.375
5.750
2"
.750
.500
.500
.750
.50
5.375
5.750
2-1/2"
.750
.500
.500
.750
.50
5.500
5.875
3-1/4"
1.250
.750
.625
1.250
.75
6.875
7.125
4"
1.250
.750
.625
1.250
.75
6.875
7.125
5"
1.250
.750
.625
1.250
.75
7.125
7.375
6"
1.500
1.000
.750
1.500
1.000
8.125
8.375
CB
8"
1.500
1.000
.750
1.500
1.000
8.250
8.500
FB Holes (4)
Bore
FB
R
R
R
CW
FB
8"
.687
7.570
Bore
E
FB
G
F
R
TF
UF
W Std.
O.S.
ZF Std.
O.S.
1-1/2"
2.000
.312
1.500
.375
1.430
2.750
3.375
.625
1.000
5.000
5.375
2"
2.500
.375
1.500
.375
1.840
3.375
4.125
.625
1.000
5.000
5.375
2-1/2"
3.000
.375
1.500
.375
2.190
3.875
4.625
.625
1.000
5.125
5.500
TF
UF
ZF + Stroke
3-1/4"
3.750
.437
1.750
.625
2.760
4.687
5.500
.750
1.000
6.250
6.500
4"
4.500
.437
1.750
.625
3.320
5.437
6.250
.750
1.000
6.250
6.500
5"
5.500
.562
1.750
.625
4.100
6.625
7.625
.750
1.000
6.500
6.750
6"
6.500
.562
2.000
.750
4.880
7.625
8.625
.875
1.125
7.375
7.625
R
TD
(Typ.)
TL
(Typ.)
UT
Bore
TD
TL
UT
XG Std.
O.S.
1-1/2"
1.000
1.000
4.000
1.750
2.125
XG
2"
1.000
1.000
4.500
1.750
2.125
2-1/2"
1.000
1.000
5.000
1.750
2.125
3-1/4"
1.000
1.000
5.750
2.250
2.500
4"
1.000
1.000
6.500
2.250
2.500
5"
1.000
1.000
7.500
2.250
2.500
6"
1.375
1.375
9.250
2.625
2.875
8"
1.375
1.375
11.250
2.625
2.875
ACT-53
ACTUATORS
Series SS Actuators
1-1/2" to 8" bore size
Double Rod End 01 (MX0) Basic
Y + Stroke
TD
(Typ.)
C + Stroke
Bore
C
Std.
O.S.
LD
Y
Std.
O.S.
ZM Std.
O.S.
1-1/2"
.375
.500
4.125
2.000
2.375
6.125
6.875
2"
.375
.500
4.125
2.000
2.375
6.125
6.875
TL
(Typ.)
UT
LD + Stroke
ZM + (2 x Stroke)
2-1/2"
.375
.500
4.250
2.000
2.375
6.250
7.000
3-1/4"
.500
.625
4.750
2.437
2.687
7.500
8.000
4"
.500
.625
4.750
2.437
2.687
7.500
8.000
Rod Clevis
303 Stainless Steel
5"
.500
.625
5.000
2.437
2.687
7.750
8.250
CW
CB
6"
.625
.750
5.500
2.875
3.125
8.750
9.250
CW
ER Radius
8"
.625
.750
5.500
2.875
3.125
8.750
9.250
Bore
TD
TL
UT
XJ Std.
O.S.
1-1/2"
1.000
1.000
4.000
4.125
4.500
XJ + Stroke
2"
1.000
1.000
4.500
4.125
4.500
2-1/2"
1.000
1.000
5.000
4.250
4.625
3-1/4"
1.000
1.000
5.750
5.000
5.250
4"
1.000
1.000
6.500
5.000
5.250
5"
1.000
1.000
7.500
5.250
5.500
6"
1.375
1.375
9.250
5.875
6.125
8"
1.375
1.375
11.250
6.000
6.250
NFPA Pin
N303 Stainless Steel
3
CD
CD
LP
CE
LH
KK Thds.
CB
CD
CE
CH
CW
ER
KK
L
S-92-03
.750
.500
1.500
1.000
.500
.500
1/2-20
.750
S-92-065
1.250
.750
2.375
1.250
.625
.750
3/4-16
1.250
S-92-12
1.500
1.000
3.125
1.500
.750
1.000
1-14
1.500
CH Across
Hex Flats
S-92-16
2.000
1.375
4.125
2.000
1.000
1.375
1-1/4 - 12
2.125
CD
LH
LP
S-96-03A
500
2.219
1.875
S-96-065A
.750
3.125
2.750
S-96-12A
1.000
3.750
3.250
Eye Bracket
303 Stainless Steel
DD
4 Places
LR Radius
CD
M Radius
F Shank
G Across Flats
A Thds.
E BA
A Thds.
B
.062
radial float
2 spherical
motion
A
B
C
D
E
F
G
H
Max Pull (lbs)
H
Across
Flats
E
D
SC-107
7/16-20
1.250
2.000
.500
.750
.625
.563
1.125
2,250
S-96-16A
1.375
5.625
4.375
SC-1-08
1/2 20
1.250
2.000
.500
.750
.625
.563
1.125
3,150
SC-1-12
3/4 16
1.750
2.312
.500
1.125
.969
.812
1.500
7,750
SC-1-16
1-14
2.500
2.937
.500
1.625
1.375
1.156
2.250
12,250
BA
CB
CD
DD
E
F
FL
LR
M
CB
BA
E
FL
S-89-03A
1.625
.750
.500
.406
2.500
.375
1.125
.750
.500
S-89-065A
2.562
1.250
.750
.531
3.500
.625
1.875
1.250
.750
Made of 303 Stainless Steel, the Rod Alignment Coupler allows 1/16" of radial float and 2 of
spherical movement.
ACT-54
S-89-12A
3.250
1.500
1.000
.656
4.500
.750
2.250
1.500
1.000
Piston
Area
Volume
Cu Ft (cm3)
Displacement
per inch
PSI (bar)
1-1/8"
1-1/2"
2"
2-1/2"
3-1/4"
4"
5"
6"
8"
.99
1.77
3.14
4.91
8.30
12.57
19.64
28.27
50.26
(6.41)
(11.40)
(20.27)
(31.67)
(53.32)
(81.07)
(126.71)
(182.39)
(324.26)
40 (3)
40 (177)
71 (315)
126 (559)
196 (874)
332 (1477)
503 (2237)
785 (3491)
1130 (5026)
2010 (8940)
60 (4)
60 (265)
106 (472)
189 (839)
295 (1311)
498 (2215)
754 (3355)
1178 (5240)
1696 (7544)
3015 (13411)
80
80
142
251
393
664
1005
1571
2262
4020
(6)
(354)
(629)
(1119)
(1748)
(2953)
(4473)
(6988)
(10061)
(17881)
100
99
177
314
491
830
1257
1964
2827
5026
(7)
(442)
(786)
(1398)
(2185)
(3692)
(5592)
(8736)
(12574)
(22356)
150
149
266
471
737
1245
1886
2946
4240
7539
(10)
(664)
(1179)
(2097)
(3277)
(5538)
(8388)
(13104)
(18860)
(33533)
200
200
353
628
982
1659
2513
3928
5654
10052
(14)
(890)
(1570)
(2793)
(4368)
(7379)
(11178)
(17472)
(25149)
(44711)
.00057
.00102
.00182
.00284
.00480
.00727
.01137
.01837
.02227
(16)
(29)
(52)
(80)
(136)
(206)
(322)
(520)
(631)
Rod
Rod
area
40
(3)
60
(4)
80
(6)
PSI (bar)
100 (7)
Volume
cu ft (cm3)
displacement
per inch
150 (10)
200 (14)
3/8"
.112
(.72)
(20)
(30)
(40)
11
(50)
17
(75)
22
(100)
.00007 (2)
1/2"
.196
(1.26)
(35)
12
(52)
16
(70)
20
(87)
30
(131)
39
(174)
.00011 (3)
5/8"
.307
(1.98)
12
(53)
18
(80)
25
(111)
31
(138)
46
(205)
61
(271)
.00018 (5)
1"
.785
(5.06)
31
(138)
47
(209)
63
(280)
70
(351)
118 (525)
157
(698)
.00045 (13)
1-3/8"
1.485 (9.58)
59
(262)
89
(396)
119
(529)
149
(663)
222 (997)
297
(1321)
.00086 (24)
1-3/4"
2.404 (15.51)
95
(423)
144 (641)
192
(854)
240
(1068)
360 (1601)
480
(2135)
.00139 (39)
ACT-55
ACTUATORS
Series SS Actuators
ACTUATORS
Series N Actuators
1-1/8" to 4" bore sizes
NFPA Interchangeable
Options selector
N C 04 J - E 0 2 - A M B 0 0
Series
Series N
Series Q Electroless Nickel
Bore
1-1/8"
1-1/2"
2"
2-1/2"
3-1/4"
4"
N
Q
Single
rod end
B
C
D
E
F
G
Options
No Options
Metal Rod Scraper
Air/Oil Piston
Double Rod W/OS Cap Rod
Stainless Piston Rods
Viton Seals
Special
Double
rod end*
P
Q
R
S
T
U
Magnetic Option
No Magnet
Magnetic Piston
Strokes in inches
0" Stroke
1" Stroke
2" Stroke
3" Stroke
4" Stroke
5" Stroke
6" Stroke
...
Substitute
00
01
02
03
04
05
06
...
30" Stroke
Special
Design Level
1
B
G
N
2**
A
C
H
M
D
J
P
E
K
R
Ports
Position
Standard
Special
J
K
M
N
P
R
S
T
1**
A
2
B
3
C
4
D
**Standard position
Mounting Options
01 No Mounts (MX0)
02 Bottom Tap (MS4)
04 Front Flange (MF1)
05 Rear Flange (MF2)
E
N
A
B
C
D
X
07
18
20
XX
ACT-56
O
M
B
Cushions
Needle Position
No Cushions
Head Only
Cap Only
Head and Cap
Special
30
xx
O
M
P
R
S
V
X
1
2
2 4
3
3
1
2
5
3
4
6
7
9
10
11
8
12
13
14
Series Q
Series Q cylinders are designed for corrosive environments. They are identical to the Series N in design, function, and
dimensions, but have electroless nickel plating and stainless steel components to create significant resistance to corrosion.
Features:
Head, cap, tube , bushings, front plate, mounts, tooling plate, tie rod nuts, and screws are plated with electroless nickel to a
minimum thickness of .0005".
Piston rod, tie rods, and cushion needles are made from 300 series stainless steel.
ACT-57
ACTUATORS
ACTUATORS
Series N Actuators
1-1/8" to 4" bore sizes
Transverse Loads
40 (178)
4" Bore
Torsional Loads
80 (9.0)
75 (8.5)
70 (7.9)
65 (7.3)
60 (6.8)
55 (6.2)
NOTE: For strokes or loads not listed
50 (5.6)
consult factory.
45 (5.1)
40 (4.5)
Transverse or torsional loads placed
35 (4.0)
on the cylinder will cause some
30 (3.4)
deflection of the piston rods.
25 (2.8)
Excessive deflection will adversely
20 (2.3)
affect cylinder life and should be
15 (1.7)
considered at the time of initial
10 (1.1)
application design.
TORQUE
5 (.56)
INCH POUNDS
(NEWTON METERS)
0 (0)
Load
35 (156)
31/4" Bore
30 (133)
21/2" Bore
25 (111)
2" Bore
20 (89)
11/2" Bore
15 (67)
11/8"
10 (44)
Bore
5 (22)
0 (0)
POUNDS
(NEWTONS)
0
(0)
5
10
15
20
25
30
35
40
(127) (254) (381) (508) (635) (762) (889) (1016)
Load
4" Bore
31/4" Bore
Load
21/2" Bore
2"
Bore
11/2"
Bore
11/8"
Bore
0
(0)
5
(127)
10
(254)
15
(381)
20
(508)
25
(635)
30
(762)
P1*
EE NPT Port
Each End
P + Stroke
2 E Sq.
DD Tap
BB Deep
4 Places
C
AC
.031 x 45
Chamfer
RE Sq.
V
A
G
F
KK Tap B1
Deep 4 Places
LB + Stroke
ZB + Stroke
GS
BM
N
HD Across Flats
Bore
1-1/8"
1-1/2"
2"
2-1/2"
3-1/4"
4"
Bore
1-1/8"
1-1/2"
2"
2-1/2"
3-1/4"
4"
A
0.625
0.625
0.75
0.75
1.25
1.25
HD
0.25
0.312
0.5
0.5
0.812
0.812
AC
1.25
1.5
1.5
1.75
1.75
1.75
J
0.625
1
1
1
1.25
1.25
B
N/A
0.59
0.9
0.9
1.498
1.498
KK
6 32
10 32
1/4 28
5/16 24
3/8 24
3/8 24
RG
B1
0.5
Thru
Thru
Thru
Thru
Thru
LB
2.25
3.625
3.625
3.75
4.25
4.25
BB
0.188
0.312
0.312
0.312
0.437
0.437
MM
0.312
0.375
0.625
0.625
1
1
BM
0.27
0.33
0.55
0.55
0.9
0.9
N
0.4
0.4
0.526
0.526
0.784
0.784
C
0.625
0.875
0.75
1
0.5
0.5
P
1.469
2.125
2.125
2.25
2.625
2.625
D
0.627
0.75
1.052
1.398
2
2.36
P1
0.241
0.303
0.48
0.635
0.845
0.875
DD
10 32
1/4 28
5/16 24
5/16 24
3/8 24
3/8 24
RE
1.125
1.428
1.84
2.192
2.758
3.323
E
1.5
2
2.5
3
3.75
4.5
RG
0.58
0.58
0.705
0.705
1.205
1.205
EE
1/8
1/4
1/4
1/4
3/8
3/8
TT
0.75
1.125
1.43
1.84
1.79
3.44
TT Sq.
TZ Sq.
F
0.25
0.375
0.375
0.375
0.625
0.625
TZ
1.25
1.5
2
2.5
3.25
4
G
.875
1.5
1.5
1.5
1.75
1.75
V
N/A
0.25
0.25
0.25
0.25
0.25
GS
0.19
0.25
0.5
0.5
0.75
0.75
Y
2.031
2.875
2.875
3.125
3.437
3.437
ZB
3.75
5.5
5.5
5.875
6.625
6.625
SH
ST
TN
TS
US
SW
Bore
1-1/8"
1-1/2"
2"
2-1/2"
3-1/4"
4"
F
0.25
0.375
0.375
0.375
0.625
0.625
G
1
1.5
1.5
1.5
1.75
1.75
XS
SU
SU
SN + Stroke
XT
NT Tap
TK Deep
4 Places
SW
SS + Stroke
LB
2.25
3.625
3.625
3.75
4.25
4.25
ACT-58
SB
0.203
0.437
0.437
0.437
0.563
0.563
SS
1.75
2.875
2.875
3
3.25
3.25
ST
0.25
0.25
0.25
0.375
0.5
0.5
SU
0.75
1.125
1.125
1.125
1.25
1.25
SW
0.25
0.375
0.375
0.375
0.5
0.5
TS
1.875
2.75
3.25
3.75
4.75
5.5
US
2.375
3.5
4.0
4.5
5.75
6.5
XS
1.75
2.25
2.25
2.5
2.875
2.875
Bore
1-1/8"
1-1/2"
2"
2-1/2"
3-1/4"
4"
NT
10 32
1/4 20
5/16 18
3/8 16
1/2 13
1/2 13
SN
1.5
2.25
2.25
2.375
2.625
2.625
TK
0.25
0.375
0.375
0.625
0.625
0.75
TN
0.5
0.625
0.875
1.25
1.5
2.063
XT
2
2.812
2.812
3.063
3.437
3.437
35
(889)
FB Holes
4 Places
FB Holes
4 Places
C
0.625
0.875
0.75
1
0.5
0.5
UF
FH
UF
Bore
1-1/8"
1-1/2"
2"
2-1/2"
3-1/4"
4"
TF
FH
G
ZF + Stroke
TF
W
FB
0.219
0.312
0.375
0.375
0.437
0.437
FH
0.25
0.375
0.375
0.375
0.625
0.625
LB + Stroke
R
1
1.43
1.84
2.19
2.76
3.32
TF
2
2.75
3.375
3.875
4.688
5.437
UF
2.5
3.75
4.125
4.625
5.5
6.25
W
1.25
1.5
1.5
1.75
1.75
1.75
Bore
1-1/8"
1-1/2"
2"
2-1/2"
3-1/4"
4"
FB
0.219
0.312
0.375
0.375
0.437
0.437
FH
0.25
0.375
0.375
0.375
0.625
0.625
TF
2
2.75
3.375
3.875
4.688
5.437
UF
2.5
3.75
4.125
4.625
5.5
6.25
ZF
4
5.875
5.875
6.25
7.25
7.25
L
CD
CD
FL
CB
CW
FL
CW
Bore
1-1/8"
1-1/2"
2"
2-1/2"
3-1/4"
4"
CB
0.375
0.75
0.75
0.75
1.25
1.25
CD
0.375
0.5
0.5
0.5
0.75
0.75
CW
0.25
0.5
0.5
0.5
0.625
0.625
FL
1.125
1.125
1.125
1.125
1.875
1.875
L
0.625
0.75
0.75
0.75
1.25
1.25
M
0.375
0.625
0.625
0.625
0.875
0.875
CB
XD + Stroke
XD + Stroke
XD
4.875
6.625
6.625
7
8.5
8.5
Bore
1-1/8"
1-1/2"
2"
2-1/2"
3-1/4"
4"
CB
0.375
0.75
0.75
0.75
1.25
1.25
CD
0.375
0.5
0.5
0.5
0.75
0.75
FL
1.125
1.125
1.125
1.125
1.875
1.875
L
0.625
0.75
0.75
0.75
1.25
1.25
M
0.375
0.625
0.625
0.625
0.875
0.875
XD
4.875
6.625
6.625
7
8.375
8.375
BA Bushing
MA Rod
KA
Thds.
AA
CA
LD + Stroke
ZM 2 x Stroke
Bore
1-1/8"
1-1/2"
2"
2-1/2"
3-1/4"
4"
Standard
Oversize
Standard
Oversize
Standard
Oversize
Standard
Oversize
Standard
Oversize
Standard
Oversize
AA
0.625
0.75
0.75
1.125
0.75
1.125
.75
1.125
1.125
1.625
1.125
1.625
BA
N/A
N/A
1.125
1.4
1.125
1.5
1.125
1.5
1.5
2
1.5
2
CA
0.25
0.25
0.375
0.5
0.375
0.5
0.375
0.5
0.5
0.625
0.5
0.625
DA
0.312
0.437
0.5
0.812
0.5
0.812
0.5
0.812
0.812
1.125
0.812
1.125
FA
0.125
0.375
0.375
0.375
0.625
0.625
VA
FA
KA
3/8 24
1/2 20
1/2 20
3/4 16
1/2 20
3/4 16
1/2 20
3/4 16
3/4 16
1 14
3/4 16
1 14
DA
Across
Flats
RM
LD
2.875
4.125
4.125
4.25
4.75
4.75
MA
0.375
0.5
0.625
1.00
0.625
1.00
0.625
1.00
1.00
1.375
1.00
1.375
P
1.844
2.125
2.125
2.25
2.65
2.625
RM
0.75
1.00
2.00
2.00
2.00
2.50
2.00
3.00
2.625
3.375
2.625
3.375
VA
N/A
N/A
0.25
0.5
0.25
0.5
0.25
0.5
0.25
0.375
0.25
0.375
ZM
4.625
7.00
7.00
7.35
8.50
8.5
Note: 1-1/8" bore overall body is 3/8" longer than our standard Series C Double Rod End Cylinder.
ACT-59
ACTUATORS
Series N Actuators
ACTUATORS
Series N Actuators
1-1/8" to 4" bore sizes
Double Rod End w/04 (MF1) Front Flange
FB Holes
4 Places
SB Holes
4 Places
P1*
TF
UF
ST
V
W + Stroke
LD + Stroke
FH
TS
SW
US
FB Holes
4 Places
SU
SU
Bore
1-1/8"
1-1/2"
2"
2-1/2"
3-1/4"
4"
F
0.25
0.375
0.375
0.375
0.625
0.625
SB
0.203
0.437
0.437
0.437
0.563
0.563
SS
2.25
3.375
3.375
3.5
3.75
3.75
ST
0.25
0.25
0.25
0.375
0.5
0.5
W + Stroke
SU
0.75
1.125
1.125
1.125
1.25
1.25
SW
0.25
0.375
0.375
0.375
0.5
0.5
LD + Stroke
SW
SS + Stroke
XS + Stroke
TS
1.875
2.75
3.25
3.75
4.75
5.5
US
2.375
3.5
4
4.5
5.75
6.5
FH
TF
UH
FH
Bore
1-1/8"
1-1/2"
2"
2-1/2"
3-1/4"
4"
XS
1.75
2.25
2.25
2.25
2.875
2.875
FB
0.219
0.312
0.375
0.375
0.437
0.437
FH
0.250
0.375
0.375
0.375
0.625
0.625
LD
2.875
4.125
4.125
4.25
4.75
4.75
R
1
1.43
1.84
2.19
2.76
3.32
TF
2
2.75
3.375
3.875
4.688
5.437
UF
2.5
3.75
4.125
4.625
5.5
6.25
V
N/A
0.25
0.25
0.25
0.25
0.25
W
1.25
1.5
1.5
1.75
1.75
1.75
DD 4 Places
LR Radius
CD
M Radius
BA
TN
XT + Stroke
NT Tap
TK Deep
4 Places
Bore
1-1/8"
1-1/2"
2"
2-1/2"
3-1/4"
4"
NT
10 32
1/4 20
5/16 18
3/8 16
1/2 13
1/2 13
SN
1.875
2.25
2.25
2.375
2.625
2.625
SN + Stroke
TK
0.25
0.375
0.375
0.625
0.625
0.75
TN
0.5
0.625
0.875
1.25
1.5
2.063
XT
2
2.812
2.812
3.063
3.437
3.437
CB
BA
E
F
FL
Bore
C-89-03A
C-89-065A
C-89-12A
BA
1.625
2.562
3.250
CB
.750
1.250
1.500
CD
.500
.750
1.000
DD
.406
.531
.656
E
2.500
3.500
4.500
F
.375
.625
.750
FL
1.125
1.875
2.250
LR
.750
1.250
1.500
M
.50
.750
1.000
DD Thds.
4 Places
LR Radius
CD
CD
M Radius
DD Drill Thru
DB CBore
TB Deep 4 Places
DD Drill Thru
DB CBore
TB Deep 4 Places
M Radius
BA
E
E
BA
E
BA
LR Radius
CB
F
FL
BA
CB CD
C-91-03A 1.625 .750 .50
C-91-065A 2.562 1.250 .750
C-91-12A 3.250 1.500 1.000
ACT-60
CW
CW
.50
.625
.750
DD
3/8-24
1/2-20
5/8-18
E
2.50
3.500
4.500
CW
F
.375
.625
.750
FL
1.125
1.875
2.250
LR
.750
1.250
1.500
M
.500
.812
1.000
F
FL
BA
CB
W-89-225K Eye 1.125 .375
W-91-225K Clevis 1.150 .375
CB
BA
E
CW
CB
BA
E
CD CW DB
DD E
F
FL
LA M
TB
.375
.328 .203 1.500 .500 1.125 .625 .375 .312
.375 .250 .328 .203 1.500 .500 1.125 .625 .375 .312
CW
CW
CC Thds.
Thru 2 Place
GG
CW
ER Radius
CD
L
TZ Sq.
CE
V
A
CH
Across Hex Flats
KK Thds.
CB
C-92-03 .750
C-92-065 1.250
C-92-12 1.500
CD
.500
.750
1.000
CE
1.500
2.375
3.125
CH
1.000
1.250
1.500
CW
.500
.625
.750
ER
.500
.750
1.000
KK
1/2-20
3/4-16
1-14
CD
A
.625
.625
.625
.625
.875
.875
CC
1/4-20
5/16-18
5/16-18
3/8-16
1/2-13
1/2-13
D
1.260
1.575
1.969
2.480
3.150
3.937
GG
.750
.860
1.180
1.500
1.970
2.760
TZ
1.25
1.500
2.000
2.500
3.250
4.000
V
.160
.160
.200
.200
.200
.200
Y
.625
.750
1.000
1.250
1.625
2.000
L
.750
1.250
1.500
Bore
NB-171-225K (1-1/8)
NB-171-03K (1-1/2")
NB-171-04K(2")
NB-171-05K (2-1/2")
NB-171-065K (3/4")
NB-171-08K (4")
.406 CBore
.250 Deep
.281 Thru 2 Places
CB
ER Radius
CD
CD
TZ
Y
CE
A
Bore
NB-172-225K (1-1/8")
NB-172-03K (1-1/2")
NB-172-04K (2")
NB-172-05K (2-1/2")
KK Thds.
CB
C-97-03 .750
C-97-065 1.250
C-97-12 1.500
CD
.500
.750
1.000
2.00
TE
CE
1.500
2.062
2.812
ER
.562
.937
1.125
KK
1/2-20
3/4-16
1-14
A
0.625
0.625
0.625
0.625
TE
3.00
3.00
3.00
3.00
Y
0.625
0.75
1.00
1.25
D
CD
CD
LP
LP
LH
CD
C-96-03A .500
C-96-065A .750
C-96-12A 1.000
TZ
1.25
1.50
2.00
2.50
LH
2.219
3.125
3.750
LH
LP
1.875
2.750
3.250
C-96-225
C-96-03
C-96-065
C-96-12
CD
.375
.500
.750
1.000
HP
.156
.156
.156
.203
LH
1.250
2.250
3.000
3.500
LP
1.032
2.093
2.843
3.297
ACT-61
ACTUATORS
Series N Actuators
ACTUATORS
Stroke (inches)
Bore
(Specify 3/4" or 1-1/8")
Options
Substitute
T and VT stroke adjustment
A
(Specify length of adjustment)
ET stroke adjustment (length of adjustment) AA
Note: adds 1/2" to overall length.
Electroless nickel plating (includes option S) EN
*Pneulectric valve (postition 1, 2, 3, 4)
EV
* Non-standard port location (Specify location) L
Non thread rod
PR
Magnetic Piston
PS
Rod extension over standard.
RX
(Specify length)
Stainless steel tie rods and nuts
S
Chrome-plated stainless steel piston rod
SS
*Stroke signal valve (position 1, 2, 3, 4)
SV
Rod thread extension over standard
TX
(specify length)
Viton seals
V
-20 to 400F temperature range.
Substitute
F
C
SR
FC
FR
HT
BT
Specify
5/16" or 3/8"
Cushions
Rod end cushion
Cap end cushion
Both ends cushioned
Series ET
Series ET actuators achieve their cushion effect through the normal compression of the Buna-N Ecology impact
dampening seals at the completion of the cylinder stroke. This compressive action absorbs the cylinders kinetic
energy and reduces the shock created by the piston striking the end caps.
The measurable cushion effect of the Ecology impact dampening seals provides a predictable pounds
stoppable/piston speed ratio, allowing you to determine the exact weight that can be stopped at a given piston speed.
Series ET actuators also help meet OSHAs noise and clean air standards (see website). They are guaranteed to
operate without lubrication for one year regardless of cycles. Non-lubricated operation is achieved by the combined
efforts of an oil-impregnated sintered iron piston rod busing that lubricates the rod during normal operation, and
through the use of a reinforced Teflon wear ring on the center perimeter of the piston. This ring reduces friction
between the piston and the cylinder tube.
Energy Absorption Capacity of Impact Dampening Seals
Size
3/4"
1", 1-1/8"
In./Lbs of
Kinetic Energy
Absorbable
1.5
3
60
in/sec
.23
.59
ACT-62
Substitute
R
C
RC
Series T
Series T uses Quad Ring Buna-Ring piston seal.
1
1 Heads and Caps: Corrosion resistant alloy or black oxided steel.
2 Rod Bushing: Oil-filled, sintered iron bushing.
3 Rod Seal: Replaceable block-vee Buna-N rod seal (Viton
optional).
4 Piston Rod: Hard chrome plated high tensile steel piston rod.
5 Seals: O-ring type seals.
6 Tie Rods: High yield strength tie rods.
7 Piston Seal: Replaceable quad ring Buna-N (Viton optional).
8 Piston: Machined alloy.
9 Tubing: Hard anodized I.D. aluminum tubing.
10
Series VT
10 Series VT uses Block-Vee Buna-N piston seal. This increases
envelope dimension by 3/8" but provides lower breakaway
pressure.
Series ET
Series ET actuators achieve their cushion effect through the
normal compression of the Buna-N shock-absorberseals at the
completion of the cylinder stroke. This compressive action
absorbs the cylinders kinetic energy and reduces the shock
created by the piston striking the end caps.
The measurable cushion effect of the shock-absorber seals
provides a predictable pounds stoppable/piston speed ratio,
allowing you to determine the exact weight that can be stopped at
a given piston speed.
Series ET actuators also help meet OSHAs noise and clean air
standards. They are guaranteed to operate without lubrication for
one year regardless of cycles. Non-lubricated operation is
achieved by the combined efforts of an oil-impregnated sintered
iron piston rod busing that lubricates the rod during normal
operation, and through the use of a reinforced Teflon wear ring on
the center perimeter of the piston. This ring reduces friction
between the piston and the cylinder tube.
11 Wear Ring: Teflon reinforced wear ring.
12 Impact Dampening Seals: Specifically designed piston
incorporates energy absorbing seals to dissipate the forces
generated during impact without increasing envelope
dimensions. Not available for cylinders with oversize rods. Not
recommended for applications that require 100% repeatable
stroke increments, or for applications that exceed the pounds
stoppable.
11
12
ACT-63
ACTUATORS
ACTUATORS
U + Stroke
T + Stroke
.25 (6)
1
3
.56
(14)
V + Stroke
1
3
.75 (19)
.25 (6)
1/8 NPT
.44 (11)
5/16 18
.13 (3)
.75 (19)
.25 (6)
.69 (18)
.5 (13)
Y + Stroke
.25 (6)
.25 (6)
.19 (5)
Drilled & C'Bored for #6 Soc. Hd. Screw
4
1
1
2
(51)
1.5
(38)
2 (51)
1 (25)
1.5
(38)
1 (25)
.31 (8)
.31 (8)
2
Nose Mount TSR, VTSR, ETSR
X + Stroke
4
.38 (10)
.81 (21)
.25 (6)
.31 (8)
.38 (10)
3/416
.44 (11)
.75
(19)
1/4 Ream
.13 (3)
.63 (16)
1/8" Max.
Radius
1.5 (38)
.75
(19)
.38 (10)
S + Stroke
T + Stroke
.75 (19)
.75
(19)
R
S
T
U
V
W
X
Y
Z
Series T
Quad ring seals
.44 (11)
2.81 (71)
1.81 (46)
1.94 (49)
1.38 (35)
2.63 (67)
2.56 (65)
2.5 (64)
2.38 (60)
NOTE: For spring return cylinders add an additional stroke length to dimensions.
ACT-64
+.000
Dia. .499 - .002
1.5 (38)
.75
(19)
.25 (6)
V + Stroke
1
.75
(19)
dia.
.63
(16)
.88 (22)
A
1/8 NPT
.25 (6)
C
.13 (3)
.75 (19)
.25 (6)
.5 (13)
.25 (6)
.25 (6)
.25 (6)
4
1
2.38
(61)
1.88
(48)
2.38 (61)
.31 (8)
1.38 (35)
1.88
(48)
1.38 (35)
.31 (8)
2
Clevis Mount TC, VTC, ETC
X + Stroke
.44 (11)
.81 (21)
.38 (10)
.5
(13)
.31 (8)
3/416
.44
(11)
1/4 Ream
.13 (3)
.81 (21)
.38 (10)
S + Stroke
1/8" Max.
Radius
.75
(19)
+.000
Dia. .499 .002
1.5 (38)
.75
(19.
A
B
C
Piston Rod
5/16 Diameter
5/16-18
.63 (16)
.25 (6)
3/8* Diameter
3/8-24
.75 (19)
.31 (8)
R
S
T
U
V
W
X
Y
Z
Series T
Quad ring seals
.44 (11)
2.81 (71)
1.81 (46)
1.94 (49)
1.31 (33)
2.63 (67)
2.63 (67)
2.5 (64)
2.38 (60)
ACT-65
ACTUATORS
ACTUATORS
3/4 Bore
1-1/8 Bore
Standard Cylinder (DTNM, VDTNM, EDTNM)
4
W + Stroke
1 (25)
Stroke
.75
(19)
dia.
1.38
(35)
.75 (19)
.13 (3)
.75 (19)
1/8 NPT
.25 (6)
.75 (19)
.75 (19)
C
.13 (3)
.13 (3)
A
.13 (3)
X + Stroke
X + Stroke
.69
(18)
.88
(22)
.19 (5)
.19 (5)
.25 (6)
.25 (6)
2
(51)
.25 (6)
.25 (6)
1/8 NPT
.44 (11)
.44 (11)
.25 (6)
.25 (6.4)
1.38 (35)
.25 (6)
Y + Stroke
Y + Stroke
1.5
(38)
2.38
(61)
1.88
(48)
.31 (8)
.31 (8)
Drilled & C'Bored
for #10 Socket Screw
W + Stroke
.81 (21)
.13 (3)
3/4-16
W + Stroke
.13 (3)
3/4-16
.56 (14)
.56 (14)
Trunion Block
Construction
One piece
Cast Ductile Iron
.75 (19)
S + Stroke
A
B
C
.75
(19)
dia.
1
(25)
Stroke
1.38
(35)
.63
(16)
Piston Rod
5/16 Diameter
5/16-18
.63 (16)
.25 (6)
3/8* Diameter
3/8-24
.75 (19)
.31 (8)
ACT-66
S
W
X
Y
.75
(19)
3/4" Bore
DT
VDT & EDT
2.81 (71)
3.19 (81)
2.06 (52)
2.44 (62)
1.69 (43)
2.06 (52)
2.38 (60)
2.75 (70)
1.5 (38)
.75
(19)
1-1/8" Bore
DT
VDT & EDT
2.81 (71)
3.19 (81)
2.06 (52)
2.44 (62)
1.56 (40)
1.94 (49)
2.38 (60)
2.75 (70)
NOTE: Series DT, VDT & EDT 1-1/8" bore cylinders are available with adjustable
cushions. Increase dimensions S through Y by 9/16" for one cushion and by 1-1/8 for
both ends cushioned.
.25 (6)
Ream
.25 (6)
.31 (8)
1.31
(33)
.68
(17)
1.56
(40)
.75 (19)
.94 (24)
Part Number
49085
Part Number
40035
40036
Thread
5/16-18
3/8-24
Rod Eye
Mounting Screw (for TF, VTF, ETF 3/4")
.25 (6)
Ream
.75 (19)
dia.
.31 (8)
1.25
(32)
.68
(17)
1.31
(33)
1.56
(40)
6-32 Th'd
Part Number
51043
Part Number
40042
40043
Thread
5/16-18
3/8-24
1.12
(28)
.75 (19)
dia.
.31 (8)
1.26 (32)
.72
(18)
.88 1.12
(28)
.38 (22)
(19)
.42
(11)
Part Number
1.03
(26) sq.
#8 C-Bore
52010
Part Number
40038
PN
Thread
A
B
C
D
E
F
1/16" Lateral
Misalignment
2 Angular
Misalignment
F
E
RA-25
1/4-28
1 (25)
1.38 (35)
2.13 (54)
.5 (13)
.75 (19)
.16 (4)
Rod Aligners
RA-31C
5/16-18
1 (25.4)
1.38 (35)
2.13 (54)
.5 (13)
.75 (19)
.19 (5)
RA-32
5/16-24
1 (25)
1.38 (35)
2.13 (54)
.5 (13)
.75 (19)
.19 (5)
RA-38
3/8-24
1 (25)
1.38 (35)
2.13 (54)
.5 (13)
.75 (19)
.22 (6)
D
B
ACT-67
ACTUATORS
ACTUATORS
NFPA Interchangeable
TA, TAV, TAE Actuators
Technical data
Medium:
Compressed air, filtered,
lubricated or non-lubricated
Operation:
Double acting
Operating Pressure:
150 PSI (10 bar)
Operating Temperature:
-20 to 200F (-29 to 107C)
Cylinder Diameters:
Nominal Inch: 3/4", 1-1/8"
Mounting Styles
Side Tapped
Side through holes
Cap eye
Head male rabbet
Threaded nose
Cap rectangular flange
Head flange
Head flange (no pilot)
Substitute
1
2
4
5
6
7
8
9
Rod Diameter
1/4"
5/16"
3/8"
1/2"
Substitute
1
2
3
4
Options
Substitute
Rod extension*
RX
Rod thread extension*
TX
Special Rod thread*
T
Plain rod end
PR
Magnetic piston**
PS
Port location (other than standard)
L
Stop tube*
ST
Stroke adjust
A
(specify length of adjustment)
Stroke adjustment (double piston design) AA
Viton seals
V
Piston Rod (chrome plated stainless steel) SS
Electroless nickel plating
EN
(includes option S)
Stainless steel tie rods &nuts
S
Single Acting Actuators
Spring on Rod End
SR
Spring on Cap End
SC
* Specify length
** PS option adds 1/2" to overall length.
Specify location
Adjustable Cushions*
Rod end only
Cap end only
Both ends
Head End*
.393 sq. in.
.917 sq. in.
.884 sq. in.
Cap End
.442 sq. in.
.994 sq. in.
.994 sq. in.
Size
3/4"
1", 1-1/8"
In./Lbs of
Kinetic Energy
Absorbable
1.5
3
ACT-68
DR
DC
D
60
in/sec
.23
.59
RM (Dia.)
1/8 NPT
CC (Thread)
Bore
BC
CC
D
DB
DN
E
EW
KM
N
NT
R
RM
RM1
RT
SD
SN
TF
TN
UF
1
.25 (6)
.63 (16)
.5 (13)
.25 (6)
.75 (19)
.13 (3)
D (Flat)
TN
.25 (6)
SN + Stroke
NT (Thread)
(2 in head, 1 in cap)
RM1
(Dia.)
CC (Thread)
1/8 NPT
KM (Thread)
.25 (6)
4
.25
(6)
.5 (13)
.75 (19)
.63 (16)
RM (Dia.)
1/8 NPT
CC (Thread)
.25 (6)
RM
DN
RT (Thread)
(4 Holes)
CC (Thread)
(Dia.)
1/8 NPT
.25 (6)
.5 (13)
.75 (19)
E
DB (Three holes for
Sockethead Capscrew)
.63 (16)
D (Flat)
.13 (3)
CC (Thread)
D (Flat)
RM (Dia.)
1/8 NPT
1
.63
(16)
RM (Dia.)
.25
(6)
.13 (3)
.25 (6)
.75 (19)
CC (Thread)
1/8 NPT
.25 (6)
R E
.5 (13)
.75 (19)
EW
.44 (11)
CC (Thread)
KM (Thread)
1
4
E
TF
.5 (13)
.75 (19)
D (Flat)
E
1/8 NPT
+.000
.003
RM
(Dia.)
CC (Thread)
R E
.25 (6)
.5 (13)
.75 (19)
.63 (16)
.63 (16)
.63 (16)
.25 (6)
UF
.13 (3)
D (Flat)
.13 (3)
.25 (6)
.31 (8)
1/8 NPT
.63 (16)
.75
(19)
4
.25 (6)
.5 (13)
.25 (6)
4 D (Flat)
.25 (6)
BC
.25 (6)
.13 (3)
.75 (19)
SD + Stroke
.63 (16)
.5 (13)
1
.25 (6)
1-1/8
1.59 (40)
3/8-24
.31 (8)
10-32
1 (25)
1.5 (38)
.38 (10)
3/4-16
1.13 (29)
10-32 x 1/4 DP
1 (25)
.75 (19)
.81 (21)
10-32 x 1/4 DP
1.25 (32)
1.25 (32)
2 (51)
1 (25)
2.5 (64)
D (Flat)
.63 (16)
1*
1.41 (36)
5/16-24
.25 (6)
10-32
.88 (22)
1.38 (35)
.38 (10)
3/4-16
1 (25)
10-32 x 1/4 DP
.88 (22)
.75 (19)
.81 (21)
8-32 x 1/4 DP
1.25 (32)
1.25 (32)
1.88 (48)
.88 (22)
2.38 (60)
.13 (3)
3/4
1.06 (27)
1/4-28
.22 (6)
8-32
.63 (16)
1 (25)
.25 (6)
5/8-18
.75 (19)
8-32 x 3/16 DP
.5 (13)
.63 (16)
.69 (18)
8-32 x 1/4 DP
1.31 (33)
1.31 (33)
1.5 (38)
.63 (16)
2 (51)
D (Flat)
.25 (6)
E
TF
UF
.25 (6)
.5 (13)
.75 (19)
.63 (16)
.25 (6)
.13 (3)
3 D (Flat)
E
TF
UF
ACT-69
ACTUATORS
ACTUATORS
Bore
AM
BC
CC
CD
D
DB
DN
E
EW
KM
N
NT
R
RM
RM1
RT
SD
SN
TF
TN
UF
ZG
RM (Dia.)
1/8 NPT
1
.25 (6)
.63 (16)
.5 (13)
.25 (6)
.75 (19)
3 D (Flat)
.13 (3)
TN
.25 (6)
SN + Stroke
NT (Thread)
(2 in head, 1 in cap)
1/8 NPT
CC (Thread)
.25 (6)
2
DN
.63 (16)
.5 (13)
.25 (6)
.75 (19)
CC (Thread)
D (Flat)
1/8 NPT
RM (Dia.)
RM1
+.000
.003
CD
57/64 Dia.
1
.25
.63 (16) (6)
1-1/8
.88 (22)
1.59 (40)
3/8-24
.38 (10)
.31 (8)
10-32
1 (25)
1.5 (38)
.38 (10)
1-14
1.13 (29)
10-32 x 1/4 DP
1 (25)
.75 (19)
1.06 (27)
10-32 x 1/4 DP
1.75 (45)
1.75 (45)
2 (51)
1 (25)
2.5 (64)
3.38 (86)
.25 (6)
1*
.63 (16)
1.41 (36)
5/16-24
.38 (10)
.25 (6)
10-32
.88 (22)
1.38 (35)
.38 (10)
3/4-16
1 (25)
10-32 x 1/4 DP
.88 (22)
.75 (19)
.81 (21)
8-32 x 1/4 DP
1.75 (45)
1.75 (45)
1.88 (48)
.88 (22)
2.38 (60)
3.13 (79)
.13 (3)
SD + Stroke
3/4
.63 (16)
1.06 (27)
1/4-28
.25 (6)
.22 (6)
8-32
.63 (16)
1 (25)
.25 (6)
5/8-18
.75 (19)
8-32 x 3/16 DP
.5 (13)
.63 (16)
.69 (18)
8-32 x 1/4 DP
1.81 (46)
1.81 (46)
1.5 (38)
.63 (16)
2 (51)
3.13 (79)
(Dia.)
CC (Thread)
KM (Thread)
.13 (3)
.25 (6)
.75 (19)
.5 (13)
2.25 (57) + Stroke
.31 (8)
.75
(19)
2
EW
.44 (11)
4
.25
(6)
.5 (13)
.75 (19)
1/8 NPT
.13 (3)
E
KM (Thread)
CC (Thread)
D (Flat)
E
AM
.25 (6.)
.25 (6)
1/8 NPT
+.000
.003
.5 (13)
(Dia.)
CC (Thread)
.25 (6)
1
2
1/8 NPT
.5 (13)
.75 (19)
RM (Dia.)
.25 (6)
.13 (3)
N
E
.25 (6)
.5 (13)
.75 (19)
.25 (6)
UF
1/8 NPT
.75 (19)
ACT-70
.63 (16)
.13 (3)
R E
.25 (6)
.5 (13)
R E
D (Flat)
E
TF
.13 (3)
.63 (16)
.25 (6)
CC (Thread)
.25 (6)
R E
RM (Dia.)
.25 (6)
D (Flat)
1/8 NPT
3 D (Flat)
CC (Thread)
BC
.63 (16)
.63 (16)
AM
4
.25 (6)
.75 (19)
RT (Thread)
(4 Holes)
3
D (Flat)
E
TF
UF
.13 (3)
.5 (13)
.75 (19)
.63 (16)
3
D (Flat)
.25 (6)
E
TF
UF
CC (Thread)
RM (Dia.)
D (Flat)
1/8 NPT
1
.25 (6)
(2 Holes)
.63 (16)
.13 (3)
.75 (19)
.75 (19)
TN
NT (thread)
.13 (3)
A
AM
B
BC
CC
D
DB
DN
E
KM
LB
N
NT
R
RM
RM1
RT
SD
SN
TF
TN
UF
ZB
ZR
ZT
.63 (16)
.25 (6)
(1 Hole)
Bore
Series
.25 (6)
SN + Stroke
LB + Stroke
ZB + 2X Stroke
RM (Dia.)
DN
1/8 NPT
1
.25 (6)
.38
(10)
.63 (16)
.75 (19)
3 D (Flat)
.63 (16)
.25 (6)
.75
(19)
.25 (6)
.13 (3)
SD + Stroke
.5 (13)
LB + Stroke
ZB + 2X Stroke
1/8 NPT
KM (Thread)
.25 (6)
.75 (19)
1-1/8
DTAEDTAV
1.88 (48)
.63 (16) .88 (23)
2.25 (57)
1.59 (40)
3/8-24
.31 (8)
10-32
1 (25)
1.5 (38)
3/4-16
1-14
2 (51) 2.5 (64)
1.13 (29)
10-32 x 1/4 DP
1 (25)
.75 (19)
.81 (21) 1.06 (27)
10-32 x 1/4 DP
2 (51) 2.5 (64)
1.5 (38) 2 (51)
2 (51)
1 (25)
2.5 (64)
2.75 (70) 3.25 (83)
3.25 (83) 4.0 (101)
3 (76) 3.5 (89)
DTAEDTAV
1.75 (45)
.63 (16)
2.13 (54)
1.41 (36)
5/16-24
.25 (6)
10-32
.88 (22)
1.38 (35)
3/4-16
2 (51) 2.5 (64)
1 (25)
10-32 x 1/4 DP
.88 (22)
.75 (19)
.81 (21)
8-32 x 1/4 DP
2 (51) 2.5 (64)
1.5 (38) 2 (51)
1.88 (48)
.88 (22)
2.38 (60)
2.75 (70) 3.25 (83)
3.25 (83) 3.75 (95)
3 (76) 3.5 (89)
DTA
CC (Thread)
3 D (Flat)
.63 (16)
1*
DTA
CC (Thread)
3/4
DTAEDTAV
1.38 (35)
.63 (16)
1.75 (45)
1.06 (27)
1/4-28
.22 (6)
8-32
.63 (16)
1 (25)
5/8-18
2 (51) 2.5 (64)
.75 (19)
8-32 x 3/16 DP
.5 (13)
.63 (16)
.69 (18)
8-32 x 1/4 DP
2.06 (52) 2.56 (65)
1.56 (40) 2.06 (52)
1.5 (38)
.63 (16)
2 (51)
2.75 (70) 3.25 (83)
3.25 (83) 3.75 (95)
3 (76) 3.5 (89)
DTA
RT (Thread)
(4 Holes)
RM (Dia.)
1/8 NPT
1
.25 (6)
BC
.63 (16)
RM (Dia.)
KM (Thread)
CC (Thread)
.25 (6)
.75 (19)
.75 (19)
.13 (3.2)
3 D (Flat)
E
LB + Stroke
ZB + 2X Stroke
.63 (16)
.25 (6)
.13 (3)
.75 (19)
.75 (19)
AM
LB + Stroke
ZR + 2X Stroke
.63 (16)
3 D (Flat)
.25 (6.4)
UF
CC (Thread)
RM (Dia.)
CC Thread
1/8 NPT
.25 (6)
UF
TF
E
RE
.63 (16)
RE
.63 (16)
.13 (3)
.13 (3)
.75 (19)
.25 (6.4)
.13 (3)
.25 (6)
.75 (19)
LB + Stroke
ZB + 2X Stroke
.63 (16)
TF
1/8 NPT
.75 (19)
.75 (19)
LB + Stroke
ZT + 2X Stroke
.63 (16)
D (Flat)
.13 (3)
.218 (5) Dia. (4 Holes)
D (Flat)
.25 (6)
.218 (5) Dia. (4 Holes)
ACT-71
ACTUATORS
ACTUATORS
Pivot Pin
Cyl.
Bore
3/4
1, 1-1/8
1, 1-1/8
Cyl.
Series
All
TA
TAV-TAE
Part
No.
49085
49086
49087
CD
.25 (6)
.25 (6)
.38 (10)
CL
.75 (19)
.88 (22)
.88 (22)
CP
.94 (24)
1.06 (27)
1.06 (27)
Cyl.
Bore
3/4
1&
1-1/8
Cyl.
Series
TA, TAV-TAE
TA
TAV-TAE
Part
No.
49069
49070
49071
CD
.25 (6)
.25 (6)
.38 (10)
CB
.25 (6)
.38 (10)
.38 (10)
DB
6-32
10-32
10-32
E
1 (25)
1.38 (35)
1.38 (35)
R
.75 (19)
1 (25)
1 (25)
Cyl.
Bore
3/4
1&
1-1/8
Cyl.
Series
TA, TAV-TAE
TA
TAV-TAE
Part
No.
49072
49073
49074
E
1 (25)
1.38 (35)
1.38 (35)
R
.75 (19)
1 (25)
1 (25)
FL
1.19 (30)
1.25 (32)
1.25 (32)
CB
.25 (6)
.38 (10)
.38 (10)
CD
.25 (6)
.25 (6)
.38 (10)
.44 (11)
Cyl.
Bore
3/4
Cyl.
Series
TA, TAV-TAE
TA
TAV-TAE
TA
TAV-TAE
Part
No.
49075
49076
49077
49078
49079
CC
1/4-28
5/16-24
5/16-24
3/8-24
3/8-24
CD
.25 (6)
.25 (6)
.38 (10)
.25 (6)
.38 (10)
CB
.25 (6)
.38 (10)
.38 (10)
.38 (10)
.38 (10)
I
.5 (13)
.75 (19)
.75 (19)
.75 (19)
.75 (19)
J
.31 (8)
.44 (11)
.44 (11)
.44 (11)
.44 (11)
Cyl.
Series
TA, TAV-TAE
TA
TAV-TAE
TA
TAV-TAE
Part
No.
49080
49081
49082
49083
49084
CB
.25 (6)
.38 (10)
.38 (10)
.38 (10)
.38 (10)
CD
.25 (6)
.25 (6)
.38 (10)
.25 (6)
.38 (10)
F
.44 (11)
.56 (14)
.56 (14)
.56 (14)
.56 (14)
G
.75 (19)
.88 (22)
.88 (22)
.88 (22)
.88 (22)
K
.19 (5)
.25 (6)
.25 (6)
.25 (6)
.25 (6)
CD
CL
CP
Eye Bracket
1.25 (32)
.31 (8)
E
CB
CD (dia.)
.5 (13)
CB
E
CB
.5
(13)
.5
(13)
DB
6-32
10-32
10-32
CD (dia.)
DB (Four Holes For
Sockethead Capscrew)
Rod Eye
CB
CD (dia.)
CB
.44 (11)
(Full Thread)
1 (25)
dia.
CC (Thread)
1-1/8
CD (dia.)
CB
.5 (13)
.13 (3)
K
CC (Thread)
ACT-72
Cyl.
Bore
3/4
F (dia.)
1
1-1/8
CC
1/4-28
5/16-24
5/16-24
3/8-24
3/8-24
CC
(Th'd)
1.25 (32)
Model
RA-25
RA-32
RA-38
RA-44
RA-50
1/16" Lateral
Misalignment
CC
(Th'd)
.25 (6)
KK
A
MM
B
1.38 (35)
1.38 (35)
1.38 (35)
1.78 (45)
1.78 (45)
C
2.13 (54)
2.13 (54)
2.13 (54)
3 (76)
3 (76)
D
.5 (13)
.5 (13)
.5 (13)
.69 (18)
.69 (18)
E
.75 (19)
.75 (19)
.75 (19)
1.22 (31)
1.22 (31)
F
.16 (4)
.19 (5)
.19 (5)
.22 (6)
.25 (6)
CC
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
A
1 (25)
1 (25)
1 (25)
1.5 (38)
1.5 (38)
.25 (6)
RM
MM
RM
Bore
3/4"
3/4"
1"
1"
1"
1-1/8"
1-1/8"
Rod
Size
1
2
2
3
4
3
4
MM
.25 (6)
.31 (8)
.31 (8)
.38 (10)
.50 (31)
.38 (10)
.50 (31)
CC
(Style A)
1/4-28
5/16-24
5/16-24
3/8-24
1/2-20
3/8-24
1/2-20
A
.63 (16)
.63 (16)
.63 (16)
.63 (16)
.75 (19)
.63 (16)
.75 (19)
KK
(Style B)
10-32
1/4-28
1/4-28
5/16-24
7/16-20
5/16-24
7/16-20
D
.22 (6)
.25 (6)
.25 (6)
.31 (8)
.44 (11)
.31 (8)
.44 (11)
RM
.63 (16)
.63 (16)
.63 (16)
.75 (19)*
.75 (19)*
.75 (19)*
.75 (19)*
* RM (Dia.) on Series TAV and DTAV 1" & 1-1/8" Sizes in Mounting Styles 5 and 8 is 1".
Other options
High temperature seals
Available for all seals and bore sizes when normal service requires the
cylinder to operate at ambient temperatures ranging above 200 to 350F
( 93 to 177C). Specify Viton.
Single Acting, Spring Return Actuators
Available for all Series and bore sizes. Add two times working stroke to
envelope dimensions.
Adjustable Cushions
Insert type adjustable cushions are available when required. Add 1/2" to
cylinder length per cushioned end.
Note: Not available with 1/2" diameter rods.
ACT-73
ACTUATORS
ACTUATORS
ACT-74
Ordering information
Model codes
170CB-2BA-A A 5 0 V
1 2 3 4 5
Bore
1/2"
3/4"
Rack/Rotary Type
Single Rack Standard Seals
Single Rack Low Friction Seals
Double Rack Low Friction Seals
Double Rack Standard Seals
Double Rack Integral A/O
Tandem Standard Seals
( 3/4" Bore only in mini rotary)
Multiple Position Actuator
2 Position
Special
Rotation
45
90
180
Special
0
1
0
1
2
5
7
O
X
A
B
C
X
6 7 8
9 10 11 12 13
Options
No Option
Electroless Nickel
Viton Seals
Special (Specify)
0
E
V
X
Switches
N/A
Rotation Adjustments
No Adjustment
End Cap A
End Cap B
End Caps A & B
End Caps B & D
Special
1
2
3
4
5
X
Bumper
No Bumpers
End Cap A
End Cap B
All Caps
A
B
C
D
Flow Controls
N/A
Output Shaft
Single End Keyway Standard
Double End Keyway
Special
A
B
X
Cushions
N/A
Mounting
Standard
Front Flange
Rear Flange
Angle Bracket
Special
1
2
3
5
X
EXAMPLE: Mini Rotary Actuator 3/4" Bore Double Rack Integral Air/Oil Tandem Mini Rotary Actuator 2 Position 180 Rotation Double
End Keyway Output Shaft Front Flange Mounting Port Position 2 No Bumpers Rotation Adjustment End Caps B & D Viton Seals.
A*
B
C
D
F
Single, Double, and Integral Air/Oil Tandem Rack & Pinion Mini Rotary Actuators
(1/2" & 3/4" Bores)
Mini Rotary Actuators are constructed with the finest materials for each component!
2
1
6
5
Seal Kits
Bore
1/2"" Single Rack
1/2"" Double Rack
3/4" Single Rack
3/4" Double Rack
Standard
Part No.
000SK
050SK
100SK
150SK
Low Friction
Part No.
000TK
050TK
100TK
150TK
Viton
Part No.
000VK
050VK
100VK
150VK
Air/Oil Tandem
Part No.
We recommend that
Air/Oil Tandems are
returned to the factory
for repair.
Torque Output
Theoretical Torque Output in Inch-pounds (Newton-meters)
PSI (bar)
Bore Size
1/2" Single Rack
1/2" Double Rack
3/4" Single Rack
3/4" Double Rack
Series
000
050
100
150
40(2.8)
2.0 (.23)
4.0 (.45)
6.6 (.75)
13.2 (1.49)
60(4.1)
2.9 (.33)
5.8 (.66)
9.9 (1.12)
19.8 (2.24)
80(5.5)
3.9 (.44)
7.8 (.88)
13.3 (1.50)
26.6 (3.0)
90(6.2)
4.4 (.50)
8.8 (1.00)
14.9 (1.68)
29.8 (3.37)
100(6.9)
4.9 (.50)
9.8 (1.11)
16.5 (1.86)
33.0 (3.73)
125(8.6)
6.1 (.69)
12.2 (1.38)
20.7 (2.33)
41.4 (4.68)
150 (10.3)
7.4 (.84)
14.8 (1.67)
24.8 (2.80)
49.6 (5.60)
Inch
pounds
per PSI
.049
.098
.165
.330
(Newtonmeters
per Bar)
(.080)
(.160)
(.270)
(.540)
NOTE: Deduct 10% from torque output for frictional loss. 3/4" Air/Oil Tandem has the torque output of a Single Rack unit: deduct 20% for frictional loss.
ACT-75
ACTUATORS
ACTUATORS
P
Cap A
Cap A/C
.88
(22.35)
Basic Dimensions
Double Rack and Pinion
Mini Rotary Actuator
Cap B/D
.88
(22.35)
1
2
1
2
3
H
1/4-28 Tapped Thru
D
Also Counterbore on
Both Sides for #10 Socket
Optional Double
Head Cap Screw
End Output Shaft
for Mounting
1.00 (25.40)
2.00 (50.80)
Bore
1/2"
3/4"
A
3.50 (89)
4.88 (124)
D
1.06 (27)
1.25 (32)
E
1.00 (25)
1.25 (32)
G
1.50 (38)
2.00 (51)
H
.59 (15)
.69 (18)
1.00 (25.40)
2.00 (50.80)
K
P
.375 (9.53) 10-32
.500 (12.70) 1/8 NPT
Bore
1/2"
3/4"
A
3.75 (95)
4.75 (121)
D
1.06 (27)
1.25 (32)
E
1.00 (25)
1.25 (32)
G
2.50 (64)
3.00 (76)
3
D
Optional Double
End Output Shaft
H
K
P
1.25 (32) .375 (9.53) 1/8 NPT
1.50 (38) .500 (12.70) 1/8 NPT
Basic Dimensions Double Rack and Pinion Mini Rotary Actuator with Integral Air-Oil Tandem
E
P
.125 x .06 Deep
(3.17 x 1.52)
A
Cap B/D
Air/Oil
Resevoir
.88
(22.35)
1.00 (25.40)
2.00 (50.80)
A
5.75 (121)
B
.3125 (8)
Port Positions
Single Rack
D
1.25 (32)
E
1.25 (32)
3
Optional Double
End Output Shaft
G
H
3.00 (76) 1.50 (38)
K
.500 (12.70)
Double Rack
Cap A/C
Single Rack
Cap A
2
G
H
Bore
3/4"
Cap B
P
.1/8 NPT
Port Positions
Integral Double Rack
Cap B/D
Cap B/D
A
ACT-76
ACTUATORS
Ordering information
Model codes
250CB-1BB-A D 3 M E
1 2 3 4 5
Bore
1-1/8"
1-1/2"
2"
2-1/2"
2
3
4
5
Rack/Rotary Type
Single Rack Standard Seals
Single Rack Low Friction Seals
Double Rack Low Friction Seals
Double Rack Standard Seals
Standard Air/Oil Tandem
Integral Air/Oil Tandem
Special
0
1
2
5
6
7
X
0
3
4
5
X
Rotation
45
90
180
270
360
Special
A
B
C
D
E
X
Output Shaft
Single End Keyway Standard
Double End Keyway
Hollow Internal Keyway
Cross Keyway
Preloaded Keyway
Special
A
B
C
D
E
X
Mounting
Standard
Front Flange
Rear Flange
Bottom Flange
Special
1
2
3
4
X
Port Location
Position
1
Standard A
Oversized E
Special
2
B*
G
3
C
H
X
4
D
J
6 7 8
9 10 11 12 13
5
F
K
Options
No Option
Electroless Nickel
O-Ring Loaded Piston Seals
Viton Seals
Special (Specify)
Magnetic Option
No Magnet
Standard Magnetic Piston
in Position A & B
Integral Air/Oil Tandems
in Position B & D
0
E
P
V
X
0
M
Rotation Adjustments
No Adjustment
End Cap A
End Cap B
End Caps A & B
End Caps B & D
Special
1
2
3
4
5
X
Bumper
No Bumpers
End Cap A
End Cap B
All Caps
Special
Flow Controls
Needle Position
No Flow Controls
End Cap A
End Cap B
End Caps
A&B
Special
A
B
C
D
X
1 2
B C D
G H J
E
K
M N P
X
Cushions
Needle Position
No Cushions
End Cap A
End Cap B
End Caps A & B
Special
1 2
B C D
G H J
N M P
X
E
K
R
ACT-77
ACTUATORS
Rotary Actuators are constructed with the finest materials for each component!
1 Floating Pistons: Solid aluminum
alloy, lightweight for low inertia, yet
strong. Provide excellent wear
characteristics against the hard
coated tube I.D.
12
7
8
7 Rotation Adjustment (optional): Up to
30 angle.
10
Seal Kits
Bore
11/8" Single Rack
11/8" Double Rack
11/2" Single Rack
11/2" Double Rack
2" Single Rack
2" Double Rack
21/2" Single Rack
21/2" Double Rack
11
Rotational Velocity
Standard
Part No.
200SK
250SK
300SK
350SK
400SK
450SK
500SK
550SK
ACT-78
Low Friction
Part No.
200TK
250TK
300TK
350TK
400TK
450TK
500TK
550TK
Viton
Part No.
200VK
250VK
300VK
350VK
400VK
450VK
500VK
550VK
Air/Oil Tandem
Part No.
We recommend
that Air/Oil
Tandems are
returned to the
factory for repair.
Single, Double, and Integral Air/Oil Tandem Rack & Pinion Rotary Actuators
(1-1/8" & 2-1/2" Bores)
Basic Dimensions for
Single and Double Rack
and Pinion Rotary Actuator
Cap A
Cap B
E
F
M Keyway
Mounting Holes
R Thds. T Deep (4)
Cap A
Retainer Plate
Cap B
Q
J
S
S
D
E
F
P
F
M Keyway
Retainer Plate
Cap C
Dimension
A
AA
B
BB
C
CC
D
DD
E
EE
F
FF
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
Degree Rotation
0.
45
90
180
270
360
Add per
Mounting Holes
R Thds.
T Deep (4)
Cap D
J
S
ACT-79
ACTUATORS
ACTUATORS
Shaft Options
Internal Keyed Hollow
Shaft can be utilized from either side and is flush with retaining plates.
2" bore 1.00" (25.4) hollow-optional
2-1/2" bore .688" (17.48) hollow-optional
Single, Double, and Integral Air/Oil Tandem Rack & Pinion Rotary
Actuators
(1-1/8" & 2-1/2" Bores)
Flush with
Retainer
Surface
+.002
BB .000
CC +.002
.000
AA .000
+.002
Cross Keyed
Shaft protrudes
from retainer EE
dimension.
EE
FF
Retainer
Surface
DD +.001
Cap B
POSITION #2
90
POSITION #1
0
Cap C
Cap D
*3 position actuator is dimensionally interchangable with 2 position.
POSITION #3
180
Output Shaft
Position Number
1
2
Pressurize Port(s)
in Cap(s)
C
A&B
Exhaust
All other ports
All other ports
(R + S) CC + AA
(R x CC) + B
Cap A1
(R + CC) + BB
Cap A
Cap B
POSITION #2
90
POSITION #1
0
POSITION #3
180
POSITION #4
270
Cap C1
Cap C
Cap D
(R + T) CC + AA
(R + S) CC + AA
(R x CC) + BB
Cap A1
Cap A
(R + Z) CC + AA
Output Shaft
Position Number
1
2
Pressurize Port(s)
in Cap(s)
C
A1 & C1
Exhaust
All other ports
All other ports
3
4
A&B
D
(R + CC) + BB
Cap B
Cap B1
POSITION #2
67.5
POSITION #3
125
POSITION #1
0
POSITION #5
270
Cap C1
Cap C
(R + T) CC + AA
ACT-80
Cap D
(R + T) CC + AA
Cap D1
POSITION #4
192.5
Output Shaft
Position Number
1
2
Pressurize Port(s)
in Cap(s)
C
A1 & C1
Exhaust
All other ports
All other ports
3
4
A&B
B1 & D1
ACTUATORS
K NPT
Port
AA
Cap B
1/4" max.
Cap B
Cap A
Manifold
Cap D
Aluminum Tube w/Optional
Magnetic Pistons provided
at Caps B & D
Cap C
Cap D
Dimension
A
Degree Rotation
0.
45
90
180
270
360
Degree Rotation
0.
45
90
180
270
360
Add per
1-1/8" Standard
5.125
(130)
6.215
(158)
7.196
(183)
9.158
(233)
11.121
(282)
13.082
(332)
1-1/8" Integral
6.125
(156)
7.215
(183)
8.196
(208)
10.158
(258)
12.120
(308)
14.082
(358)
.0218
(1)
1-1/2" Standard
7.500
(191)
9.025
(292)
10.397
(264)
13.142
(333)
15.887
(404)
18.632
(473)
1-1/2" Integral
8.000
(203)
9.525
(242)
10.897
(277)
13.642
(347)
16.387
(416)
19.132
(486)
.0305
(1)
2" Standard
8.750
11.195
13.395
17.796
22.197
26.598
2-1/2" Standard
9.000
(229)
11.445
(291)
13.645
(347)
18.046
(458)
22.447
(570)
26.848
(682)
2-1/2" Integral
10.000
(254)
12.445
(316)
14.645
(372)
19.046
(484)
23.447
(596)
27.848
(707)
.0489
(1)
(222)
(284)
(340)
(452)
(563)
(676)
2" Integral
9.500
11.945
14.145
18.546
22.947
27.348
.0489
(241)
(303)
(359)
(471)
(583)
(695)
(1)
Air/Oil Tank
Model Number
AOT-225X2
AOT-225X3
AOT-225X4
AOT-225X5
Tank
Bore Size
1-1/8"
1-1/8"
1-1/8"
1-1/8"
AA
1.500
1.500
1.500
1.500
B
(38)
(38)
(38)
(38)
3.125
4.125
5.125
6.125
C
(79)
(105)
(130)
(156)
2.750
3.750
4.750
5.750
D
(70)
(95)
(121)
(146)
.750
.750
.750
.750
(19)
(19)
(19)
(19)
K
1/8" NPT
1/8" NPT
1/8" NPT
1/8" NPT
ACT-81
ACTUATORS
5/16"
Rotation Adjustment
Cushioning
The Cushioning Principle
Cushions permit the trapping of
cylinder exhaust volume prior to
the completion of
full rotation. This volume is then
metered through a
finely tapered needle to
deliver smooth, adjustable
deceleration of the rotary actuator.
NOTE: On 1-1/8" bores, add 1/2"
to overall dimension for each
cushion block.
1-1/2"
.938 (23.81)
Cushion Blocks
2"
1.187 (30.16)
2-1/2"
1.187 (30.16)
Adjustment
Needle
Adjustable Cushioning
Flush, self locking adjustment
needle allows fine cushion
metering. Cushion design
features a unique, one piece,
nitrile compound seal captured
within a groove machined to
exacting tolerances. This
allows linear and radial float
of the cushion seal, virtually
eliminating problems
associated with misalignment.
.500
(12.70)
.500
(12.70)
1-1/8"
.687 (17.46)
Cushion
Bore Size
1-1/8" Single Rack
1-1/8" Double Rack
1-1/2" Single Rack
1-1/2" Double Rack
2" Single Rack
2" Double Rack
2-1/2" Single Rack
2-1/2" Double Rack
Displacement
for Each Degree
of Rotation
Inch3
(mm3)
.0108
.0216
.0270
.0540
.0760
.1520
.1200
.2400
(177)
(354)
(443)
(885)
(1254)
(2491)
(1966)
(3933)
Axial Load
Bearing Capacity
Radial Load
Bearing Capacity
Distance
Between
Bearings
lbs
100
100
225
225
500
500
500
500
lbs
200
200
450
450
1000
1000
1000
1000
Inch
1.38
1.38
1.56
1.56
2.28
2.28
2.28
2.28
(Kg)
(45)
(45)
(102)
(102)
(227)
(227)
(227)
(227)
(Kg)
(91)
(91)
(204)
(204)
(454)
(454)
(454)
(454)
(mm)
(35)
(35)
(40)
(40)
(58)
(58)
(58)
(58)
Unit Weight
90
Unit Weight
180
Unit Weight
360
lbs
3.5
6
6.75
10.5
18
22
18.5
22.5
lbs
3.75
7
7.5
12.75
19.5
24
20
24.5
lbs
4.25
8.5
9
17.25
21
27
22
27.5
lbs
.063
.063
.344
.344
.656
.656
.656
.656
(Kg)
(1.59)
(2.72)
(3.06)
(4.77)
(8.17)
(9.98)
(8.40)
(10.22)
(Kg)
(1.70)
(3.18)
(3.41)
(5.79)
(8.85)
(10.90)
(9.08)
(11.12)
(Kg)
(1.93)
(3.86)
(4.09)
(7.83)
(9.53)
(12.26)
(9.99)
(12.49)
(Kg)
(.03)
(.03)
(.16)
(.16)
(.30)
(.30)
(.30)
(.30)
Bore Size
1-1/8" Single Rack
1-1/8" Double Rack
1-1/2" Single Rack
1-1/2" Double Rack
2" Single Rack
2" Double Rack
2-1/2" Single Rack
2-1/2" Double Rack
40 (2.8)
25 (2.8)
50 5.6)
62 (7.0)
12 (14.0)
175 (19.9)
352 (39.7)
275 (31.0)
550 (62.1)
60
37
75
93
186
264
528
412
825
(4.1)
(4.2)
(8.4)
(10.4)
(21.0)
(29.8)
(59.6)
(46.6)
(93.2)
80
(5.5)
50
(5.6)
100 (11.3)
124 (14.0)
248 (28.0)
352 (39.7)
703 (79.5)
550 (62.1)
1100 (124.2)
90
(6.2)
56
(6.3)
112 (12.7)
139 (15.7)
279 (31.5)
396 (44.7)
791 (89.4)
619 (69.9)
1237 (139.8)
PSI (Bar)
100
(6.9)
62
(7.0)
124 (14.1)
155 (17.5)
310 (35.0)
440 (49.7)
879 (99.3)
687 (77.7)
1375 (155.3)
125
(8.6)
78
(8.8)
155 (17.6)
194 (21.9)
387 (43.8)
550 (62.1)
1099 (124.1)
860 (97.1)
1719 (194.1)
150
93
187
232
465
660
1319
1031
2062
(10.3)
(17.5)
(21.1)
(26.2)
(52.5)
(74.4)
(149.0)
(116.5)
(232.9)
200
124
249
310
620
879
1758
1375
2750
(13.8)
(10.5)
(28.1)
(35.0)
(70.0)
(99.3)
(198.6)
(155.3)
(310.6)
250 (17.2)
156 (17.6)
311 (35.1)
387 (43.7)
774 (87.5)
1099 (124.1)
2198 (248.3)
1719 (194.1)
3437 (388.2)
400 (27.6)
249 (28.1)
498 (56.2)
620 (70.0)
1239 (140.0)
1758 (198.6)
3517 (397.2)
2750 (310.6)
5500 (621.2)
NOTE: Air/Oil Tandem and Multiple Position Rotary Actuators utilize a double rack configuration; however, the torque output of a Single Rack unit apply. Deduct 10% from torque output for frictional loss. Deduct 20%
for frictional loss on all Air/Oil Tandem Rotary Actuators.
ACT-82
NORGREN
ENGINEERING
ADVANTAGE
CUSTOM SOLUTIONS
CASE STUDY
CUSTOMER CHALLENGE
Air Solenoid
Accessory
Pack (ASAP)
www.EngineeringAdvantage.com
Find solutions across ALL INDUSTRIES | 1.800.611.9156
INDUSTRIAL
AUTOMATION
LIFE
SCIENCES
ENERGY
RAIL
IN-PLANT COMMERCIAL
AUTOMOTIVE
VEHICLES
FOOD &
BEVERAGE
ACT-83
ACTUATORS
ISO/VDMA Cylinders
DA/8000
Double acting
32 ... 320 mm
Standard models
32
40
50
63
80
100
125
160
200
250
320
Piston
rod
12
16
20
20
25
25
32
40
40
50
63
ISO Port
size
G1/8
G1/4
G1/4
G3/8
G3/8
G1/2
G1/2
G3/4
G3/4
G1
G1
Model
non-magnetic
DA/8032/*
DA/8040/*
DA/8050/*
DA/8063/*
DA/8080/*
DA/8100/*
DA/8125/*
DA/8160/*
DA/8200/*
DA/8250/*
DA/8320/*
Model
magnetic
DA/8032/M/*
DA/8040/M/*
DA/8050/M/*
DA/8063/M/*
DA/8080/M/*
DA/8100/M/*
DA/8125/M/*
DA/8160/M/*
DA/8200/M/*
DA/8250/M/*
DA/8320/M/*
NPT Port
size
1/8"
1/4"
1/4"
3/8"
3/8"
1/2"
1/2"
3/4"
3/4"
1"
1"
Model
non-magnetic
DC/8032/*
DC/8040/*
DC/8050/*
DC/8063/*
DC/8080/*
DC/8100/*
DC/8125/*
DC/8160/*
DC/8200/*
DC/8250/*
DC/8320/*
Model
magnetic
DC/8032/M/*
DC/8040/M/*
DC/8050/M/*
DC/8063/M/*
DC/8080/M/*
DC/8100/M/*
DC/8125/M/*
DC/8160/M/*
DC/8200/M/*
DC/8250/M/*
DC/8320/M/*
Options selector
DC/8050/M/
Strokes (mm)
3000 max.
Special variants
Substitute
Ecology seals
B
Heat resistant seals, 150C max.
T
Piston rod material
Substitute
Chrome plated stainless steel
D
Non-Chrome plated
R
(for N1 and N2 options only)
Threads
Substitute
Metric ports: ISO 228 (G 1/8 to G 1) A
NPT ports***
C
Series
8000
Substitute
8
Note: If option is not required, disregard option position within part number eg. RA/8100/100
For combinations of cylinder variants consult our Technical Service.
* N1 and N2 option built using non chrome plate, stainless steel piston rods
*** Consult factory for NPT ports on bore sizes: 125, 160, 200, 250, 320
ACT-84
Service
kit
QA/8032/00
QA/8040/00
QA/8050/00
QA/8063/00
QA/8080/00
QA/8100/00
QA/8125/00
QA/8160/00
QA/8200/00
QA/8250/00
QA/8320/00
DA/8000
Double acting
32 ... 320 mm
A
WH
L2
DA/8000, DA/8000/M
VD
AM
L12
PL
AP
EE
SW
RT
KK
KV
VA
PL
*Cushion
screw
EE
KW
B e 11
A-B
L8 + stroke
G
MM h 9
Standard cylinders
BA e 11
Dimensions in mm
L9
BH
RT
BH
BG
80 320 mm
BG
32
40
50
63
80
100
125
160
200
250
320
AM
22
24
32
32
40
40
54
72
72
84
96
AP
3.5
4.5
6
10
8.5
9
10
18
18
22.5
22.5
B e11
30
35
40
45
45
55
60
65
75
90
110
BA e11
30
35
40
45
45
55
60
65
75
90
110
BG
18
18
18
17.5
21.5
21.5
30
28.5
28.5
35
30
BH (A/F)
6
6
8
8
19
19
24
32
32
36
46
E
47
53
65
75
95
115
140
183.5
224
280
350
EE
G 1/8
G 1/4
G 1/4
G 3/8
G 3/8
G 1/2
G 1/2
G 3/4
G 3/4
G1
G1
G
27.5
32
31
33
33
37
46
50
50
58
60
KK
M10x1.25
M12x1.25
M16x1.5
M16x1.5
M20x1.5
M20x1.5
M27x2
M36x2
M36x2
M42x2
M48x2
KV (A/F)
17
19
24
24
30
30
41
55
55
65
75
L8
L9
L12
MM h9
PL
RT
SW (A/F)
VA
VD
WH
32
40
50
63
80
100
125
160
200
250
320
94
105
106
121
128
138
160
180
180
200
220
4
4
5
5
-
6
6.5
8
8
10
10
13
16
16
20
24
12
16
20
20
25
25
32
40
40
50
63
13
15
18.5
19
19
18
22.5
21
21
29
30
32.5
38
46.5
56.5
72
89
110
140
175
220
270
M6
M6
M8
M8
M 10
M 10
M 12
M 16
M 16
M 20
M 24
10
13
17
17
22
22
27
36
36
41
55
3
3.5
3.5
4
4
4
6
4
5
7
7
6
6
6
6
6
6
15.5
15
15
13
13
26
30
37
37
46
51
65
80
95
105
120
KW
5
6
8
8
10
10
13.5
18
18
21
24
L2
20
22
27
29
33
36
45
58
67
80
90
Cylinder weight
lbs. at 0 mm lbs/25 mm
1.12 lb
0.13 lb
1.76 lb
0.18 lb
2.93 lb
0.26 lb
3.97 lb
0.29 lb
7.17 lb
0.44 lb
10.6 lb
0.51 lb
17.6 lb
0.73 lb
32.9 lb
1.21 lb
47.8 lb
1.32 lb
71.9 lb
2.03 lb
131.9 lb
3.22 lb
Cylinder variants
DA/8000/J, DA/8000/JM Cylinders with double ended piston rod
ZM + 2 x stroke
L8 + stroke
A-B
SW 1
32
40
50
63
80
100
125
160
200
ZM
146
165
180
195
220
240
290
340
370
L8
94
105
106
121
128
138
160
180
180
SW1 (A/F)
32
40
50
63
80
100
10
13
16
16
21
21
ACT-85
ACTUATORS
ISO/VDMA Cylinders
DA/8000
Double acting
32 ... 320 mm
L8 + stroke
L10 + stroke
L11
L8 + stroke
A
ACTUATORS
ISO/VDMA Cylinders
32
40
50
63
80
100
125
160
200
L8
94
105
106
121
128
138
160
180
180
ACT-86
L 10
247
278
294
325
357
387
462
530
560
L 11
7
8
8
9
9
9
12
10
10
32
40
50
63
80
100
125
160
200
250
320
A
40
63
63
63
80
80
80
116
116
116
143
Maximum stroke
per gaiter
60
145
145
145
250
250
250
350
350
350
500
DA/8000
Double acting
32 ... 320 mm
Dimensions in mm
Mountings
AK
B, G
D2
FH
32
40
50
63
80
100
125
160
200
250
320
QM/8032/35
QM/8032/35
QM/8050/35
QM/8050/35
QM/8080/35
QM/8080/35
QM/8125/35
QM/8160/35
QM/8160/35
QM/8250/35
QM/8320/35
QM/8025/38
QM/8040/38
QM/8050/38
QM/8050/38
QM/8080/38
QM/8080/38
QM/8125/38
QM/8160/38
QM/8160/38
QA/8032/22
QA/8040/22
QA/8050/22
QA/8063/22
QA/8080/22
QA/8100/22
QM/8125/22
QM/8160/22
QM/8200/22
QM/8250/22
QM/8320/22
QA/8032/21
QA/8040/21
QA/8050/21
QA/8063/21
QA/8080/21
QA/8100/21
QM/8125/21
QM/8160/21
QM/8200/21
QM/8250/21
QM/8320/21
QA/8032/23
QA/8040/23
QA/8050/23
QA/8063/23
QA/8080/23
QA/8100/23
QM/8125/23
QM/8160/23
QM/8200/23
QM/8250/23
QM/8320/23
QA/8032/42
QA/8040/42
QA/8050/42
QA/8063/42
QA/8080/42
QA/8100/42
QA/8125/42
QA/8160/42
QA/8200/42
QM/8025/25
QM/8040/25
QM/8050/25
QM/8050/25
QM/8080/25
QM/8080/25
QM/8125/25
QM/8160/25
QM/8160/25
QM/8250/25
QM/8320/25
QA/8032/34
QA/8040/34
QA/8050/34
QA/8063/34
QA/8080/34
QA/8100/34
QA/8125/34
QM/8032/28
QM/8040/28
QM/8050/28
QM/8063/28
QM/8080/28
QM/8100/28
QM/8125/28
QM/8160/28
QM/8200/28
QM/8250/28
QM/8320/28
SS
SW
UF
UH
UL
32
40
50
63
80
100
125
160
200
250
320
QA/8032/24
QA/8040/24
QA/8050/24
QA/8063/24
QA/8080/24
QA/8100/24
QM/8125/24
QM/8160/24
QM/8200/24
QM/8250/24
QM/8320/24
QM/8032/26
QM/8040/26
QM/8050/26
QM/8063/26
QM/8080/26
QM/8100/26
QM/8125/26
QM/8160/26
QM/8200/26
QA/8032/27
QA/8040/27
QA/8050/27
QA/8063/27
QA/8080/27
QA/8100/27
QM/8125/27
QM/8160/27
QM/8200/27
QA/8032/41
QA/8040/41
QA/8040/41
QA/8063/41
QA/8063/41
QA/8100/41
QA/8100/41
QM/8160/41
QM/8160/41
M/P19931
M/P19932
M/P19933
M/P19934
M/P19935
M/P19936
M/P19937
M/P19938
M/P19939
M/P19493
M/P19494
M/P19495
M/P19496
M/P19497
M/P19498
M/P19499
M/P19679
M/P19683
M/P19446
M/P19447
QM/8025/32
QM/8040/32
QM/8050/32
QM/8050/32
QM/8080/32
QM/8080/32
QM/8125/32
QM/8160/32
QM/8160/32
QM/8250/32
QM/8320/32
QA/8032/40
QA/8040/40
QA/8050/40
QA/8063/40
QA/8080/40
QA/8100/40
QA/8125/40
QA/8160/40
QA/8200/40
QA/8032/43
QA/8040/43
QA/8050/43
QA/8063/43
QA/8080/43
QA/8100/43
QA/8125/43
QM/8160/43
QM/8200/43
UR
US
Guide blocks
Guide blocks
Locking unit
(passive)
32
40
50
63
80
100
125
160
200
QA/8032/33
QA/8040/33
QA/8050/33
QA/8063/33
QA/8080/33
QA/8100/33
QM/8125/33
QM/8160/33
QM/8200/33
M/P40310
M/P40311
M/P40312
M/P40313
M/P40314
M/P40315
M/P71355
M/P71356
M/P71357
QA/8032/51/*
QA/8040/51/*
QA/8050/51/*
QA/8063/51/*
QA/8080/51/*
QA/8100/51/*
QA/8032/61/*
QA/8040/61/*
QA/8050/61/*
QA/8063/61/*
QA/8080/61/*
QA/8100/61/*
QA/8032/59
QA/8040/59
QA/8050/59
QA/8063/59
QA/8080/59
QA/8100/59
QA/8125/59
ACT-87
ACTUATORS
ISO/VDMA Cylinders
Dimensions in mm
BB
SW 3 SW 2
SW 4
SW 1
TG
KK
KK
DD
TG
B1
L2
L
Rear flange B
Front flange G
ISO 6431 and
VDMA 24562 Part 2
QA/8***/22
QM/8***/22
TG
32.5
38
46.5
56.5
72
89
110
140
175
220
270
32
40
50-63
80-100
125
100-200
lb
0.04
0.04
0.11
0.11
0.18
0.18
0.31
0.68
0.68
2.03
3.22
UF
B1
5
6
8
10
13.5
18
F
26
26
34
42
40
78
L
73
77
106
122
147
251
L2
20
24
32
40
54
72
Foot C
ISO 6431 and
VDMA 24562 Part 2
QA/8***/21
QM/8***/21
TF
FB
Thread KK
M10x1.25
M12x1.25
M16x1.5
M20x1.5
M27x2
M36x2
MF
AU
SW1
19
19
30
30
40
50
SW2
12
12
19
19
24
36
SW3
17
19
24
30
41
55
SW4
30
30
42
42
55
75
lb
0.44
0.44
1.43
1.59
3.75
11.91
AH
DD
M6
M6
M8
M8
M10
M10
M12
M16
M16
M20
M24
AT
BB
17
17
23
23
28
28
34
42
42
50
60
32
40
50
63
80
100
125
160
200
250
320
E1
AO
AB
TR
E
E1
36
40
50
55
65
75
100
120
140
180
220
280
350
FB
6.6
6.6
7
9
9
9
12
14
16
18
22
26
33
MF
10
10
10
10
12
12
16
16
20
20
25
25
30
R
0
0
32
36
45
50
63
75
90
115
135
165
200
TF
55
60
64
72
90
100
126
150
180
230
270
330
400
UF
70
76
80
90
110
125
154
186
224
280
320
395
475
lb
0.35
0.44
0.55
0.77
1.54
1.76
2.98
4.85
3.75
6.84
10.14
16.32
29.0
AB
6.6
6.6
7
9
9
9
12
14
16
18
22
26
33
AH
27
30
32
36
45
50
63
71
90
115
135
165
200
AO
6
7
8 (11)
9 (12)
10 (13)
12 (13)
19
19
20 (25)
20
30
35
45
AT
4
4
4
4 (5)
5
5
5 (6)
5 (6)
9 (7)
8
9
10
16
AU
16
16
24
28
32
32
41
41
45
60
70
75
85
E
36
40
48
53
64
74
98
115
140
180
220
280
350
TR
22
26
32
36
45
50
63
75
90
115
135
165
200
lb
0.07
0.09
0.33
0.40
0.66
0.86
1.76
2.09
5.30
7.72
11.58
20.94
48.51
LH
UB
Rear clevis D
ISO 6431 and
VDMA 24562 Part 2
QA/8***/23
QM/8***/23
20
25
32
40
50
63
80
100
125
160
200
250
320
FL
CB H 14
B2
Rear clevis D2
VDMA 24562 Part 2
QA/8***/42
FL
B1 H 14
R1
B3
R2
EK1 h 9
20
25
32
40
50
63
80
100
125
160
200
250
320
EK f 8
ACTUATORS
MR
32
40
50
63
80
100
125
160
200
250
320
CB H14
26
28
32
40
50
60
70
90
90
110
120
EK f8
10
12
12
16
16
20
25
30
30
40
45
FL
22
25
27
32
36
41
50
55
60
70
80
L
13
16
17
22
22
27
31
35.5
36
45
50
LH
52
60
68
79
99
119
139 (40)
181
181
218
238
MR
9
12
12
15
15
20
25
30
30
40
45
UB
45
52
60
70
90
110
130
170
170
200
220
lb
0.24
0.35
0.49
0.75
1.19
1.98
5.95
9.48
13.45
4.19
67.25
32
40
50
63
80
100
125
160
200
B1 H14
14
16
21
21
25
25
37
43
43
B2
34
40
45
51
65
75
97
122
122
B3
3.3
4.3
4.3
4.3
4.3
6.3
6.3
6.3
6.3
EK h9
10
12
16
16
20
20
30
35
35
FL
22
25
27
32
36
41
50
55
60
R1
11
12
14.5
18
22
22
30
36
38
ACT-88
R2
17
20
22
25
30
32
42
46
49
lb
0.44
0.51
0.79
1.21
1.98
3.20
5.95
9.48
13.45
RK
CL
CE
CM
CK h 11
CL
KK
UW
LE
L1
ER
TD e 9
L3
D H11
TL
Thread KK
M10x1.25
M12x1.25
M16x1.5
M20x1.5
M27x2
M36x2
M42x2
M48x2
CE
40
48
64
80
110
144
168
192
CK h11
10
12
16
20
30
35
40
50
Front hinge M
QM/8***/26
CL
20
24
32
40
55
70
85
96
CM
10
12
16
20
30
35
40
50
ER
16
19
25
32
45
57
68
85
LE
20
24
32
40
54
72
84
96
CE
G1
RK
28
32
41.5
50
62
95
106
121
32
40
50
63
80
100
125
lb
0.20
0.29
0.73
1.48
2.98
6.62
14.11
19.18
D
H2
CA
L1
L1
16
20
24
24
28
38
50
L3
8
10
12
12
14
19
25
K1
R
1
1.6
1.6
1.6
1.6
2
2
TD e9
12
16
16
20
20
25
25
TL
12
16
16
20
20
25
25
TM h14
50
63
75
90
110
132
160
UW1
lb
50
0.44
55
0.84
65
1.32
75
2.43
100
4.19
120
7.72
145 14.33
MR
8
8
9
12
12
15
15
20
25
30
30
lb
0.04
0.07
0.20
0.24
0.37
0.53
0.82
1.30
7.06
13.45
14.99
FL
Rear eye R
ISO 6431 and
VDMA 24562
Part 2
QA/8***/27
QM/8***/27
RK
D H11
30
35
40
45
45
55
60
EW
L
CD H 9
32
40
50-63
80-100
125
100-200
250
320
TM h 14
MR
K2
G2
G3
CA
32
36
45
50
63
71
90
115
135
CE
40
48
64
64
80
80
110
144
144
D
11
11
15
15
18
18
20
20
24
G1
21
24
33
37
47
55
70
97
105
Rear hinge L
QA/8***/24
QM/8***/24
G2
18
22
30
35
40
50
60
88
90
G3
31
35
45
50
60
70
90
126
130
FL
H2
8
10
12
12
14
15
20
25
30
K1
38
41
50
52
66
76
94
118
122
K2
51
54
65
67
86
96
124
156
162
CA
32
36
45
50
63
71
90
115
135
165
200
K2
G2
LH
G3
D
11
11
15
15
18
18
20
20
24
33
40
FL
22
25
27
32
36
41
50
55
60
70
80
S
6.6
6.6
9
9
11
11
14
14
16
lb
0.53
0.73
1.79
1.83
3.13
4.12
8.49
19.85
23.37
20
25
32
40
50
63
80
100
125
160
200
CD H9
8
8
10
12
12
16
16
20
25
30
30
EW
15.8
15.8
25.8
27.8
31.7
39.7
49.7
59.7
69.7
89.7
89.7
FL
20
20
22
25
27
32
36
41
50
55
60
FL
Rear hinge UL
VDMA 24562
Part 2
QA/8***/43
QM/8***/43
L
14
14
13
16
17
22
22
27
33
35.5
37
G1
CA
H2
L1
K1
CH
32
36
45
50
63
71
90
115
135
RK
28
32
41.5
41.5
50
50
62
95
95
G1
32
40
50
63
80
100
125
160
200
250*
320*
L1
1.6
1.6
1.6
1.6
2.5
2.5
3.2
4
4
CH
32
40
50
63
80
100
125
160
200
H2
Thread KK
M10x1.25
M12x1.25
M16x1.5
M16x1.5
M20x1.5
M20x1.5
M27x2
M36x2
M36x2
K1
K2
G2
L1
32
40
50
63
80
100
125
160
200
G3
G1
21
24
33
37
47
55
70
97
105
128
150
G2
18
22
30
35
40
50
60
88
90
110
122
G3
31
35
45
50
60
70
90
126
130
160
186
H2
8
10
12
12
14
15
20
25
30
35
40
K1
38
41
50
52
66
76
94
118
122
150
170
K2
51
54
65
67
86
96
124
156
162
200
234
L1
1.6
1.6
1.6
1.6
2.5
2.5
3.2
4
4
2
2
LH
52
60
68
79
99
119
139
181
181
218
238
S
6.6
6.6
9
9
11
11
14
14
18
22
26
Llb
0.35
0.51
0.79
1.15
1.81
2.91
11.91
23.37
31.09
71.44
115.76
ULlb
5.27
1.04
1.81
2.51
4.26
6.28
12.79
23.59
33.52
ACT-89
ACTUATORS
D 1 H7
F x 45
*
R
**
H2
H1
T1
D 3
TD e 9
Trunnion support S
VDMA 24562
Part 2
QA/8***/41
QM/8***/41
D 2
TL
TM h 14
32
40
50
63
80
100
125
160
200
A
32
36
36
42
42
50
50
60
60
B1
46
55
55
65
65
75
75
92
92
B2
18
21
21
23
23
28.5
28.5
39
39
C
10.5
12
12
13
13
16
16
21.5
21.5
H7
12
16
16
20
20
25
25
32
32
D2
6.6
9
9
11
11
14
14
18
18
D3
11
15
15
18
18
20
20
26
26
fx45
1
1.6
1.6
1.6
1.6
2
2
2.5
2.5
H1
30
36
36
40
40
50
50
60
60
H2
15
18
18
20
20
25
25
25
25
T1
6.8
9
9
11
11
13
13
15.5
15.5
lb
0.22
0.31
0.31
0.42
0.42
0.75
0.75
4.19
4.19
TD e 9
UW
TD e9 TL
32
40
50
63
80
100
125
160
200
250
320
20
24
28
28
28
38
50
50
50
60
70
1
1.6
1.6
1.6
1.6
2
2
2.5
2.5
3.2
3.2
12
16
16
20
20
25
25
32
32
40
50
TM
h14
50
63
75
90
110
132
160
200
250
320
400
12
16
16
20
20
25
25
32
32
40
50
UW
50
58
70
80
100
126
152
192
240
318
400
XV
min.
66
76
82
88
97
112
136
155
170
193
215
XV
max.
80
89
98
107
123
128
154
185
200
217
245
lb
0.35
0.77
0.77
1.87
1.87
5.07
7.28
11.69
20.73
39.69
66.15
Torque
in. lb.
53.1
53.1
53.1
88.5
88.5
132.75
221.25
354
354
Note: Style H: These mountings are only supplied assembled complete with the cylinder. Unless otherwise
specified, units will be supplied with dimension XV plus half the stroke length. XV = Distance from the
piston rod shoulder to the center of the mounting.
Style UH: It is most important that the locking screws which secure the mounting to the tie rod are tightened
to the torque figures shown in the table below. For maximum energy input, consult our Technical Service.
XV min.
XV max. + stroke
***
*Type UH ***Type H
**Grease nipple up to 125 mm
B2
B1
TL
Locking screw
Narrow hinge SS
TM h 14
TD e9 TL
TM h14 UW
lb
32
40
50
63
80
100
125
25
28
28
36
36
48
50
1
1.6
1.6
1.6
1.6
2
2
12
16
16
20
20
25
25
50
63
75
90
110
132
160
0.77
1.10
1.76
3.09
4.19
5.07
7.28
Wide hinge SW
12
16
16
20
20
25
25
58
65
80
96
116
140
163
Torque
in. lb.
17.70
30.98
30.98
44.25
53.10
53.10
53.10
Swivel hinge US
G1
EU
ER
G1
EM
CN H 7
G1
CK H 9
CN G 7
EN -0,1
EM1
G2
K1
G3
CA
32
40
50
63
80
100
125
160
200
250
320
32
36
45
50
63
71
90
115
135
165
200
CH
CN H7
32
36
45
50
63
7
90
115
135
CH
H2
G2
K1
K2
L1
H2
L1
H2
S
CA
CA
D
L1
ACTUATORS
K1
ACT-90
D
10
12
12
16
16
20
30
30
40
45
G3
K2
K2
CK H9
10
12
16
16
20
20
30
35
35
G2
G3
H2
EM
EM1
EN-0.1 ER
EU
G1
G2
G3
H6
K1
K2
L1
R1
11
11
11
15
18
18
20
20
24
33
40
26
28
32
40
50
60
70
90
90
110
120
10
12
16
16
20
20
30
35
35
14
16
21
21
25
25
37
43
43
10.5
12
15
15
18
18
25
28
28
21
24
33
37
47
55
70
97
105
128
150
18
22
30
35
40
50
60
88
90
110
122
31
35
45
50
60
70
90
126
130
160
186
8
10
10
12
14
15
20
25
30
35
40
38
41
50
52
66
76
94
118
122
150
170
51
54
65
67
86
96
124
156
162
200
234
1.6
1.6
1.6
1.6
2.5
2.5
4
4
2
2
10
11
13
15
15
19
22
31
31
40
45
6.6
6.6
6.6
9
11
11
14
14
16
22
26
13
13
13
15
15
15
15
15
15
16
18
21
23
28
30
40
44
47
SW
lb
0.11
0.15
0.31
0.40
0.62
3.13
5.95
13.89
17.64
29.55
48.51
SS
lb
0.33
0.44
1.06
1.10
1.65
2.65
5.51
13.23
16.76
US
lb
0.42
0.53
1.01
1.30
2.27
3.09
6.84
14.11
20.07
EN
FL
KK
Z Z
CN H 7
EN - 0,1
CN H 7
LE
ER
Thread KK
M10x1.25
M12x1.25
M16x1.5
M20x1.5
M27x2
M36x2
M42x2
M48x2
AX
20
22
28
33
51
56
60
65
CE
43
50
64
77
110
125
142
160
ER
AX
CNH7
10
12
16
20
30
35
40
50
EN-0.1
14
16
21
25
37
43
49
60
ER
14
16
21
25
35
40
45
58
LE
15
17
22
26
36
41
46
59
Z
13
13
15
15
15
16
17
12
lb
0.20
0.29
0.73
1.48
2.98
6.62
14.11
19.18
32
40
50
63
80
100
125
160
200
CN H7
10
12
16
16
20
20
30
35
35
EN
14
16
21
21
25
25
37
43
43
ER
16
19
21
24
28
30
40
44
48
FL
22
25
27
32
36
41
50
55
60
R
14.5
18
19
24
24
29
36
41
42
Z
13
13
13
15
15
15
15
16
16
lb
0.33
0.55
0.88
1.21
1.98
3.31
5.95
10.14
16.10
ACT-91
ACTUATORS
ACTUATORS
QA/8000/61/*
QA/8000/51/*
32
40
50
63
80
100
Guide
rod
10
12
12
12
16
16
Model
QA/8032/51/*
QA/8040/51/*
QA/8050/51/*
QA/8063/51/*
QA/8080/51/*
QA/8100/51/*
Non-magnetic
DA/8032, PDA/182032
DA/8040, PDA/182040
DA/8050, PDA/182050
DA/8063, PDA/182063
DA/8080, PDA/182080
DA/8100, PDA/182100
32
40
50
63
80
100
Guide
rod
12
16
20
20
25
25
Model
QA/8032/61/*
QA/8040/61/*
QA/8050/61/*
QA/8063/61/*
QA/8080/61/*
QA/8100/61/*
Passive locking
cartridge
QA/8032/63
QA/8040/63
QA/8050/63
QA/8050/63
QA/8080/63
QA/8080/63
Locking
force (N)
600
1000
1500
1500
3000
3000
Non-magnetic #
DA/8032, PDA/182032/IIL #
DA/8040, PDA/182040/IIL #
DA/8050, PDA/182050/IIL #
DA/8063, PDA/182063/IIL #
DA/8080, PDA/182080/IIL #
DA/8100, PDA/182100/IIL #
ACT-92
QA/8000/51/*
32 ... 100 mm
Dimensions in mm
AO
AV
AW
AX
AG
AW
AT
AL
AS
AP
AR
AE
**
AH
AC +
AM
AG
AF
F
AW
AN
AZ
AG
BB
BA
** Adjustment range
32
40
50
63
80
100
32
40
50
63
80
100
AC + **
69 + 2
74 + 2
91.5 + 4
92 + 4
106 + 6
111 + 6
AP
100
106
125
132
165
185
AD
12
12
15
15
15
15
AR
90
100
120
125
155
175
AE (A/F)
15
15
22
22
27
27
AS
74
80
96
104
130
150
AF (A/F)
17
19
24
24
30
30
AT
78
84
100
105
130
150
AG
M6
M6
M8
M8
M 10
M 10
AV
45
50
60
70
90
110
AH
10
10
12
12
15
15
AW
32.5
38
46.5
56.5
72
89
AJ
32.5
38
46.5
56.5
50
70
AX
6.6
6.6
9
9
11
11
AK**
110
122
135
153
180
199
AZ
48
56
66
76
98
118
AL
58
64
80
95
130
150
BA
76
85
99
114
134.5
153.5
AM
10
12
12
12
16
16
BB
9
11
19
15
25
28.5
AN
6
6
6
7
9
9
at 0 mm
2.20 lb
2.65 lb
3.97 lb
4.90 lb
9.04 lb
12.80 lb
AO
9
11
19
15
14
19
per 100
0.13 lb
0.20 lb
0.20 lb
0.20 lb
0.35 lb
0.35 lb
** Adjustment ranges
Note: Supplied complete with mounting screws for cylinder.
Load capacity
F (N)
1000
500
8100
8080
100
8063
8050
8040
50
8032
10
10
50 100
500
Outstroke (mm)
ACT-93
ACTUATORS
QA/8000/61/*
32 ... 100 mm
Dimensions in mm
CC
CD
T 0,2
CF 0,2
CE
DH H7 x 2,5
CK
DD
CY
2,5 +- 0,1
CT
DJ
2,5
DH H7
CN
CI **
CX 0,2
DC
DF
CV f7
CR
CS
CP
CW
DE 0,2
CJ
DH H7 x 2,5
DG
DM
CH
VI
CG
CO -0,3
DL
***
DK f6
CZ
CX 0,2
** Adjustment range
*** Centering sleeve
**** Safety zone
***** Blanking plug (remove when using locking cartridge)
DB 0,3
CH
DA -0,3
ACTUATORS
*****
32
40
50
63
80
100
32
40
50
63
80
100
32
40
50
63
80
100
CA**
177
192
237
237
280
280
CO -0.3
97
115
137
152
189
213
C
6.6
6.6
9
9
11
11
CB + **
100 + 5
111 + 5
128 + 10
128 + 10
151 + 10
156 + 10
CP
90
110
130
145
180
200
DD
11
11
15
15
18
18
CC
65
69
65
97
112
112
CR
74
87
104
119
148
172
DE 0.2
78
84
100
105
130
150
CD
28
33
40
40
50
55
CS
50.5
58.5
70.5
85.5
105.5
130.5
DF
M6
M6
M8
M8
M 10
M 10
CE
12
12
15
15
20
20
CT (A/F)
17
19
24
24
30
30
DG
22.5
27.5
32.5
32.5
54.5
54.5
CF 0.2
15.3
23
33.8
29.3
37
40.5
CV f7
12
16
20
20
25
25
DH H7
9
9
11
11
13
13
CG
6.5
6.5
9
9
11
11
CW
61
69
85
100
130
150
DJ
M5
G 1/8
G 1/8
G 1/8
G 1/8
G 1/8
CH
M6
M6
M8
M8
M 10
M 10
CX 0.2
32.5
38
46.5
56.5
72
89
DK f6
9
9
11
11
13
13
CI**
84.5
88
94
98.5
114
115.5
CY (A/F)
5
6
6
6
8
8
DL
70.5
74.5
91.5
91.5
141.5
141.5
CJ (A/F)
13
15
22
22
27
27
CZ
125
140
150
182
215
220
DM
14
14
16
16
20
20
CK
5
6
6
6
7
7
DA -0.3
50
58
70
85
105
130
T
32.5
38.0
46.5
56.5
72.0
87.0
CN
61
67
75.5
80
92
93
DB 0.3
45
54
63
80
100
120
at 0 mm
2.65 lb
4.85 lb
7.94 lb
10.14 lb
19.18 lb
24.26 lb
** Adjustment range
Note: Supplied complete with mounting screws for cylinders and two centering sleeves.
Attention
When using guide blocks (QA/8000/61) for profile cylinders PDA/182000 you have to order a model with a barrel which is
turned at 90 (PDA/182000/IIL, .../MIL) so that the port threads are in line with the two switch grooves.
ACT-94
per 100 mm
0.40 lb
0.71 lb
1.08 lb
1.08 lb
1.70 lb
1.70 lb
QA/8000/61/*
32 ... 100 mm
*
f
***
**
**
** Outstroke
*** Center of gravity
Load capacity
Deflection (mm)
Deflection (mm)
Correction factor
(N)
500
1,0
400
2,5
2,5
0,9
2,0
2,0
0,8
1,5
1,5
0,7
1,0
1,0
0,5
8032
8032
300
80
200
100
80
-8
10
80
0
5
80 0-80
40
63
803
2
0
0 100 200 300 400 500 600
Outstroke (mm)
0,6
0,5
0,5
20
40 60
Stroke (mm)
8040
8050 - 8063
8080 - 8100
8040
8050 - 8063
8080 - 8100
0
0 100 200 300 400 500 600
Outstroke (mm)
Outstroke (mm)
In the case of shock load applications, the figures given in the diagrams above must be reduced by a factor of 2.
ACT-95
ACTUATORS
ACTUATORS
Technical data
Medium:
Compressed air, filtered,
lubricated or non-lubricated
Operation:
PDA/182000: Adjustable
cushioning
PDA/182000/M: Magnetic piston,
adjustable cushioning
Operating pressure:
15 to 232 psig (1 to 16 bar)
Operating temperature:
-4F to +176F
(-20C to +80C ) max.
High temperature versions:
302F (150C) max.
Consult our Technical Service for
use below +35F (+2C)
Strokes:
Standard: see next page
Non-standard strokes available
(10 to 3000 mm)
Materials:
Profile barrel: anodized aluminum
End covers: pressure diecast
aluminum
Piston rod: stainless steel
(Martensitic)
Piston rod seals: polyurethane
Piston seals: polyurethane
O-rings: nitrile rubber
Standard models
32
40
50
63
80
100
125
Piston
rod
12
16
20
20
25
25
32
Port
size
G1/8
G1/4
G1/4
G3/8
G3/8
G1/2
G1/2
Magnetic
Standard
PDA/182032/M/*
PDA/182040/M/*
PDA/182050/M/*
PDA/182063/M/*
PDA/182080/M/*
PDA/182100/M/*
PDA/182125/M/*
Magnetic
Non-rotating
PRA/182032/N2/*
PRA/182040/N2/*
PRA/182050/N2/*
PRA/182063/N2/*
PRA/182080/N2/*
PRA/182100/N2/*
Non-magnetic
Standard
PDA/182032/*
PDA/182040/*
PDA/182050/*
PDA/182063/*
PDA/182080/*
PDA/182100/*
PDA/182125/*
Non-magnetic
Non-rotating
PRA/182032/N1/*
PRA/182040/N1/*
PRA/182050/N1/*
PRA/182063/N1/*
PRA/182080/N1/*
PRA/182100/N1/*
Service kit
Standard
QA/8032/00
QA/8040/00
QA/8050/00
QA/8063/00
QA/8080/00
QA/8100/00
QA/8125/00
Options selector
P A / 1 8 2 / /
Special variants
Substitute
Heat resistant seals, 150C max.
T
Hydraulic
H
Ecology seals
B
Piston rod material
Substitute
Chrome plated stainless steel
D
Non-chrome plated
R
(for N1 and N2 options only)
Threads
Substitute
Metric ports: ISO 228 (G 1/8 to G 1)
NPT ports***
A
C
Strokes (mm)
3000 max.
Variants (non-magnetic piston)Substitute
Standard
None
Special wiper/seal
W1
Low friction
X1
Piston rod bellow
G
Without cushioning
W
Without cushioning, low friction
X3
Double ended piston rod
J
Double ended piston rod,
special wiper/seal
W3
Four-position
IT
Non-rotating piston rod
N1
Locking unit
L2
Barrel turned at 90 for use with
guide blocks QA/8000/61/*
IIL
Extended piston rod
IU
Extended piston rod,
special wiper/seal
W5
P*A/182***/IU/****/***
/W5/
Extension (mm)
Note: Disregard option positions not used.
For combinations of cylinder variants consult
our Technical Service.
*** Consult factory for NPT ports on bore sizes: 125, 160, 200, 250, 320
ACT-96
Service Kit
Non-rotating
QA/8032/N1/00
QA/8040/N1/00
QA/8050/N1/00
QA/8063/N1/00
QA/8080/N1/00
QA/8100/N1/00
PDA/182000, PDA/182000/M
Double acting
32 ... 125 mm
Theoretical forces
Theoretical forces (lbs) at 87 psig
Cylinder
Outstroke
32
108
40
170
50
265
63
421
80
679
100
1060
125
1657
Instroke
93
142
223
378
612
994
1548
Mountings
AK
B, G
D2
32
40
50
63
80
100
125
QM/8032/35
QM/8032/35
QM/8050/35
QM/8050/35
QM/8080/35
QM/8080/35
QM/8125/35
QM/8025/38
QM/8040/38
QM/8050/38
QM/8050/38
QM/8080/38
QM/8080/38
QM/8125/38
QA/8032/22
QA/8040/22
QA/8050/22
QA/8063/22
QA/8080/22
QA/8100/22
QM/8125/22
QA/8032/21
QA/8040/21
QA/8050/21
QA/8063/21
QA/8080/21
QA/8100/21
QM/8125/21
QA/8032/23
QA/8040/23
QA/8050/23
QA/8063/23
QA/8080/23
QA/8100/23
QM/8125/23
QA/8032/42
QA/8040/42
QA/8050/42
QA/8063/42
QA/8080/42
QA/8100/42
QA/8125/42
QM/8025/25
QM/8040/25
QM/8050/25
QM/8050/25
QM/8080/25
QM/8080/25
QM/8125/25
SS
SW
UF
UH
32
40
50
63
80
100
125
QA/8032/24
QA/8040/24
QA/8050/24
QA/8063/24
QA/8080/24
QA/8100/24
QM/8125/24
QM/8032/26
QM/8040/26
QM/8050/26
QM/8063/26
QM/8080/26
QM/8100/26
QM/8125/26
QA/8032/27
QA/8040/27
QA/8050/27
QA/8063/27
QA/8080/27
QA/8100/27
QM/8125/27
QA/8032/41
QA/8040/41
QA/8040/41
QA/8063/41
QA/8063/41
QA/8100/41
QA/8100/41
M/P19931
M/P19932
M/P19933
M/P19934
M/P19935
M/P19936
M/P19937
M/P19493
M/P19494
M/P19495
M/P19496
M/P19497
M/P19498
M/P19499
QM/8025/32
QM/8040/32
QM/8050/32
QM/8050/32
QM/8080/32
QM/8080/32
QM/8125/32
PQA/182032/40
PQA/182040/40
PQA/182050/40
PQA/182063/40
PQA/182080/40
PQA/182100/40
PQA/182125/40
UL
UR
US
Guide blocks*
Guide blocks*
Locking unit*
(passive)
Groove-key
32
40
50
63
80
100
125
QA/8032/43
QA/8040/43
QA/8050/43
QA/8063/43
QA/8080/43
QA/8100/43
QA/8125/43
QA/8032/33
QA/8040/33
QA/8050/33
QA/8063/33
QA/8080/33
QA/8100/33
QM/8125/33
M/P40310
M/P40311
M/P40312
M/P40313
M/P40314
M/P40315
M/P71355
QA/8032/51/*
QA/8040/51/*
QA/8050/51/*
QA/8063/51/*
QA/8080/51/*
QA/8100/51/*
QA/8032/61/*
QA/8040/61/*
QA/8050/61/*
QA/8063/61/*
QA/8080/61/*
QA/8100/61/*
QA/8032/59
QA/8040/59
QA/8050/59
QA/8063/59
QA/8080/59
QA/8100/59
QA/8125/59
32 M/P72816
40 M/P72816
50 M/P72816
63 M/P72816
80 M/P72816
100 M/P72816
ACT-97
ACTUATORS
PDA/182000, PDA/182000/M
Double acting
32 ... 125 mm
Dimensions in mm
Standard cylinders
PDA/182000, PDA/182000/M
A
Section L8 + stroke
WH
L2
Section
L 12
EE
A-B
PL
VD
AM
PL
Cushion screw
VA
EE
MM h 9
AP
SW (A/F)
RT
KK
KV
BA e 11
KW
B e 11
L9
BH
BH
BG
RT
ACTUATORS
80-125 mm
BG
32
40
50
63
80
100
125
AM
22
24
32
32
40
40
54
AP
3.5
4.5
6
10
8.5
9
10
B e11
30
35
40
45
45
55
60
BA e11
30
35
40
45
45
55
60
BG
18
18
18
17.5
21.5
21.5
30
BH (A/F)
6
6
8
8
19
19
24
E
47
53
65
75
95
115
140
EE
G 1/8
G 1/4
G 1/4
G 3/8
G 3/8
G 1/2
G 1/2
G
27.5
32
31
33
33
37
46
KK
M10 x 1.25
M12 x 1.25
M16 x 1.5
M16 x 1.5
M20 x 1.5
M20 x 1.5
M27 x 2
KV (A/F)
17
19
24
24
30
30
41
32
40
50
63
80
100
125
L8
94
105
106
121
128
138
160
L9
4
4
5
5
L12
6
6.5
8
8
10
10
13
MM h9
12
16
20
20
25
25
32
PL
13
15
18.5
19
19
18
22.5
R
32.5
38
46.5
56.5
72
89
110
RT
M6
M6
M8
M8
M 10
M 10
M 12
SW (A/F)
10
13
17
17
22
22
27
VA
3
3.5
3.5
4
4
4
6
VD
6
6
6
6
6
6
15.5
WH
26
30
37
37
46
51
65
ACT-98
KW
5
6
8
8
10
10
13.5
at 0 mm
1.12 lb
1.80 lb
2.93 lb
3.97 lb
7.17 lb
10.6 lb
17.6 lb
L2
20
22
27
29
33
36
45
per 25 mm
0.13 lb
0.18 lb
0.26 lb
0.29 lb
0.44 lb
0.51 lb
0.73 lb
PDA/182000, PDA/182000/M
Double acting
32 ... 125 mm
Dimensions in mm
Cylinder variants
PDA/182000/J, PDA/182000/JM Cylinders with double ended piston rod
ZM + 2 x stroke
32
40
50
63
80
100
125
L8 + stroke
ZM
146
165
180
195
220
240
290
L8
94
105
106
121
128
138
160
SW 1
Section
A-B
32
40
50
63
80
100
SW1 (A/F)
10
13
16
16
21
21
L8 + stroke 1
32
40
50
63
80
100
125
L8
94
105
106
121
128
138
160
L 10
247
278
294
325
357
387
462
L 11
7
8
8
9
9
9
12
ACT-99
ACTUATORS
ACTUATORS
Passive
Technical data
Medium:
Compressed air, filtered, lubricated
or non-lubricated
Type:
Passive model pressure applied
to release
Operating pressure:
58 to 145 psig (4 to 10 bar)
Operating temperature:
+32F to 176F (0C to +80C).
Consult our Technical Service for
use below +35F (+2C).
Materials
Body: hard anodised diecast
aluminum
Seals: polyurethane & nitrile
Cartridge: anodized aluminum body
Locking wedges: hardened steel
ACT-100
32
40
50
63
80
100
125
Magnetic
ISO/VDMA/NFE
Profile cylinder
PDA/182032/L4/*
PDA/182040/L4/*
PDA/182050/L4/*
PDA/182063/L4/*
PDA/182080/L4/*
PDA/182100/L4/*
PDA/182125/L4/*
Non-magnetic
ISO/VDMA/NFE
Profile cylinder
PDA/182032/L2/*
PDA/182040/L2/*
PDA/182050/L2/*
PDA/182063/L2/*
PDA/182080/L2/*
PDA/182100/L2/*
PDA/182125/L2/*
ISO/VDMA/NFE
Tie-rod cylinder
DA/8032/L4/*
DA/8040/L4/*
DA/8050/L4/*
DA/8063/L4/*
DA/8080/L4/*
DA/8100/L4/*
DA/8125/L4/*
ISO/VDMA/NFE
Tie-rod cylinder
DA/8032/L2/*
DA/8040/L2/*
DA/8050/L2/*
DA/8063/L2/*
DA/8080/L2/*
DA/8100/L2/*
DA/8125/L2/*
32
40
50
63
80
100
125
Locking unit
Passive
QA/8032/59
QA/8040/59
QA/8050/59
QA/8063/59
QA/8080/59
QA/8100/59
QA/8125/59
Locking unit
If retro fitting locking unit the
cylinder must be of an extended
piston rod design.
*Cartridge
AB
AJ
L8 + stroke
AC
EE
E1
AN
B e 11
RT
AM
AO
SW
VD AD
AF
WH
AE
AK
AG
AL
E
AH
32
40
50
63
80
100
125
AB
32
35.5
49
49
62
65
85
AC
10
10
15
15
19
19
19
AD
12
12
16
15
16
18
27
AE
8
10
15
15
16
16
25
AF
40
46
54
55
.70
70
95
AG
4
4.5
11.5
7.5
10
10
11
AH
48
55
70
70
90
92
122
AJ
22.5
27.5
32.5
41
53
53
65
AK
M5
M5
M6
M8
M8
M8
M 10
AL
20
24
30
38
48
48
65
AM
71
74.5
91.5
108.5
141.5
141.5
152
32
40
50
63
80
100
125
AO
4
4
4
4
4
4
4
B e11
30
35
40
45
45
55
60
E
48
56
68
82
100
120
140
E1
50
58
70
85
105
130
150
EE
M5
G 1/8
G 1/8
G 1/8
G 1/8
G 1/8
G 1/8
L8
94
105
106
121
128
138
160
R
32.5
38
46.5
56.5
72
89
110
RT
M6
M6
M8
M8
M 10
M 10
M 12
SW (A/F)
8
8
13
13
17
17
17
VD
10
10
12
12
20
23
32
WH
16
18
22
20
33
38
65
AN
8
10
12
12
16
16
20
32
40
50
63
80
100
125
Locking forces
135 lbs
225 lbs
338 lbs
495 lbs
1125 lbs
1125 lbs
1575 lbs
ACT-101
ACTUATORS
ACTUATORS
LINTRAPLUS Rodless
cylinders
C/146000, C/146100, C/146200
Internal, external and precision roller guided
Double acting
16 ... 80 mm
Models:
C/146000 with internal guide
C/146100 with external adjustable guide
C/146200 with precision roller guide
Operating pressure:
14.5 to 116 psi (1 to 8 bar)
Operating temperature:
-22F to 176F (-30C to +80C) max.
(consult our Technical Service for use below 36F [+2C])
Standard models
16
20
25
32
40
50
63
80
Port size
inch (mm)
(M5)
1/8 NPT (G-1/8)
1/8 NPT (G-1/8)
1/4 NPT (G-1/4)
1/4 NPT (G-1/4)
3/8 NPT (G-3/8)
1/2 NPT (G-1/2)
1/2 NPT (G-1/2)
Internal guide
Magnetic
M/146016/M/*
C/146020/M/*
C/146025/MC/*
C/146032/MC/*
C/146040/MC/*
C/146050/MC/*
C/146063/MC/*
C/146080/M/*
External guide
Magnetic
M/146116/M/*
C/146120/M/*
C/146125/MC/*
C/146132/MC/*
C/146140/MC/*
C/146150/MC/*
C/146163/MC/*
C/146180/M/*
C/146225/MC/*
C/146232/MC/*
C/146240/MC/*
C/146250/MC/*
C/146263/MC/*
Magnetic piston
ACT-102
C / 146 / MC /
Options selector
Opitional finish
Standard caps
Substitute
Blank
A
AS
Ports
NPT ports ( 20 to 80 mm)
Metric ports ( 16 to 80 mm)
Substitute
C
M
Guiding system
Internal
External
Roller
Substitute
0
1
2
Cylinder (mm)
16
20
25
32
40
50
63
80
Substitute
16
20
25
32
40
50
63
80
C version
M version
Distance between
carriage centers (inches)
Ordering information
Cylinder
LINTRA cylinder with internal guiding system.
32 mm cylinder diameter and 10' (3000 mm) stroke
length with magnetic piston, and NPT ports.
Quote: C/146032/MC/120
ACT-103
ACTUATORS
ACTUATORS
Type S
Swinging Bridge
Type UV
Carriage Bracket
Type V
Center Support
Page 120
QM/146016/21
Page 121
QM/146016/37
Page 121
QM/146016/34
Page 122
-
Page 120
QM/146016/32
Page 122
QM/146116/35
20
QM/146020/21
QM/146020/37
QM/146020/34
QM/146120/36
QM/146020/32
QM/146120/35
25
QM/146025/21
QM/146025/37
QM/146025/34
QM/146125/36
QM/146025/32
QM/146125/35
32
QM/146032/21
QM/146032/37
QM/146032/34
QM/146132/36
QM/146032/32
QM/146132/35
40
QM/146040/21
QM/146032/37
QM/146040/34
QM/146140/36
QM/146040/32
QM/146140/35
50
QM/146050/21
QM/146050/37
QM/146050/34
QM/146150/36
QM/146050/32
QM/146150/35
63
QM/146063/21
QM/146050/37
QM/146063/34
QM/146163/36
QM/146063/32
QM/146163/35
80
QM/146080/21
QM/146080/37
QM/146080/34
Assembly kit for caged ball
Adjustable stop
Assembly kit for
linear motion guide
shock absorbers
10
mm
25
32
40
50
63
QM/146225/P/70
QM/146232/P/70
QM/146240/P/70
QM/146250/P/70
QM/146263/P/70
ACT-104
8
QM/146125/75
QM/146132/75
QM/146140/75
Type W
Secondary
Carriage
mm
16
Type UW
Side Mounting
Plate
QM/146080/32
Groove key for
profile barrel
12
Page 123
QM/146125/67
QM/146132/67
QM/146140/67
QM/146150/67
QM/146163/67
QM/146180/35
Groove key for
guiding bridge
Page 120
M/P74065
M/P74065
M/P74065
M/P74065
M/P74065
9
Page 120
M/P74065
M/P74065
M/P74066
M/P41858
M/P41858
Cushioning Performance
lb. (kg)
The dynamic energy of a LINTRA cylinder is caused by direct or partial external loads
which must be absorbed by pneumatic cushioning.
The cushioning ability depends to a large extent on the pneumatic circuit (e. g. counter
pressure, pre-exhaust). The values given in the diagram were tested with an operation
pressure of 87 psi (6 bar) using a 5/2 control valve. When installed horizontally, depending
upon the speed, dynamic energy can be absorbed by the cylinder. Whenever the values
given in the diagram are exceeded, the transported mass must be cushioned by additional
shock absorbers. These have to be located at the center of gravity of the mass.
2204 (1000)
1763 (800)
1300 (600)
882 (400)
441 (200)
176 (80)
132 (60)
88 (40)
80
63
50
40
44 (20)
22 (10)
18 (8)
13 (6)
8.8 (4)
32
25
20
4.4 (2)
16
2.2 (1)
16 31
(0.4) (0.8)
47 63 79
(1.2) (1.6) (2.0)
V
inches /s
(m / s)
Cylinder deflection
Deflection due to external forces
2248
(10000)
1124
(5000)
224
(1000)
112
(500)
80
22.5
(100)
inches (mm)
63
0.08 (2)
50
0.04 (1)
40
0.02 (0.4)
0.04
(0.9)
Support length
32
0.004 (0.1)
0
25
2.25
(10)
Example:
Cylinder 40 mm. external force 40 lbf (180 N),
distance between supports 10' (3000 mm)
Required: total deflection
1. Deflection due to external force (f1)
see Diagram 1 (1mm/100 N) 40 lbf (180 N)
2. Deflection due to cylinder weight diagram 2
20
16
0.22
(1) 0
39
(1000)
6.6
(2000)
72
(1830)
9.8
(3000)
3.2
6.5
9.8
13
16.4 19.7
(1000) (2000) (3000) (4000) (5000) (6000)
13
(4000)
16.4
19.6
(5000)
(6000)
inches (mm)
Support length
Example:
Cylinder 32 mm, stroke length 11' (3500 mm), external load
45 lbf. (200 N) and a deflection about 0.04 (1 mm).
Maximum distance between supports = 6' (1830 mm) (see
diagrams).
Therefore an additional support is required.
Total deflection:
Max. permitted deflection (f1 + f2)
A deflection of more than 0.12" (3 mm)
is not permitted.
ft.
(mm)
0.07"(1.8 mm)
+ 0.04"(0.9 mm)
0.2" (2.7 mm)
< 0.04"(1 mm)
39"(1000 mm) Stroke
ACT-105
ACTUATORS
ACTUATORS
Cushioning length
inches (mm)
0.5 (12)
1 (26)
1 (26)
1.4 (35)
2 (50)
2.3 (60)
2.8 (70)
3 (75)
mm
16
20
25
32
40
50
63
80
Fy
lbf.
(N)
Fz
lbf.
(N)
Internal guide
C/146000
Mx
My
lbf in.
lbf in.
(Nm)
(Nm)
9
(40)
20
(90)
28
(125)
37
(165)
74
(330)
99
(440)
155
(690)
176
(780)
27
(120)
63
(280)
87
(385)
113
(500)
223
(990)
297
(1320)
450
(2000)
518
(2300)
2.7
(0.3)
8.0
(0.9)
13.3
(1.5)
26.6
(3)
57.5
(6.5)
97.4
(11)
177.0
(20)
239.0
(27)
33.6
(3.8)
106.2
(12)
168.2
(19)
292.1
(33)
743.5
(84)
1062.1
(120)
2124.3
(240)
3186.4
(360)
112 (5000
50 (220)
202 (900)
84 (375)
337 (1500)
141 (630)
562 (2500)
225 (1000)
899 (4000)
371 (1650)
C/146200/P
Mz
lbf in.
(Nm)
9.7
(1.1)
31.9
(3.6)
49.6
(5.6)
88.5
(10)
212.4
(24)
309.8
(35)
619.6
(70)
885.1
(100)
45
(200)
106
(470)
133
(590)
176
(780)
360
(1600)
450
(2000)
721
(3200)
878
(3900)
17.7
(2)
53.1
(6)
79.7
(9)
150.5
(17)
345.2
(39)
575.3
(65)
1062.1
(120)
1593.2
(180)
48.7
(5.5)
159.3
(18)
247.8
(28)
380.6
(43)
973.6
(110)
1416.2
(160)
3097.9
(350)
4602.6
(520)
Fy
lbf.
(N)
My, Mz
lbf in.
(Nm)
133
(590)
176
(780)
338
(1500)
450
(2000)
721
(3200)
266
(1180)
351
(1560)
676
(3000)
901
(4000)
1441
(6400)
115.1
(13)
221.3
(25)
513.4
(58)
858.6
(97)
1593.2
(180)
371.7
(42)
566.5
(64)
1416.2
(160)
2124.3
(240)
4602.6
(520)
450
(2000)
899
(4000)
899
(4000)
1798
(8000)
1798
(8000)
283
(32)
566
(64)
566
(64)
1593
(180)
1593
(180)
1770
(200)
3540
(400)
3540
(400)
7080
(800)
7966
(900)
Loading values applicable to a speed of 0.2 m/s. Maximum working life is normally reached below a speed of 1 m/s.
* The forces and moments refers to the center of the guide. They must not be exceeded in dynamic applications.
ACT-106
Mx
My
Mz
Fy
Fz
<
_
+
+
+
+
Mx max My max Mz max Fy max Fz max
C/146100/MD
16
x=4"
(100 mm)
lbf in (Nm)
156
(400)
(4)
(14)
(17)
(23)
20
211.33
1296
6768
8496
(940)
(12)
(64)
(80)
25
265.29
156
852
936
(1180)
(18)
(96)
(106)
(131)
(155)
(180)
(205)
(230)
(255)
(279)
32
350.72
300
1368
1596
1884
2172
2460
2748
3036
3324
(1560)
(34)
(155)
(181)
(213)
(246)
(278)
(310)
(343)
(375)
40
674.46
696
3480
3852
4392
4932
5472
6012
6552
(3000)
(78)
(393)
(435)
(496)
(557)
(618)
(679)
(740)
50
899.28
1152
4044
4044
4584
5124
5652
6192
6732
(4000)
(130)
(457)
(457)
(518)
(579)
(639)
(700)
(761)
63
1438.85
2124
11328
12036
13272
14424
15660
(6400)
(240)
(1280)
(1360)
(1500)
(1630)
(1770)
80
1753.60
3192
16908
17172
18672
20088
(7800)
(360)
(1910)
(1940)
(2110)
(2270)
x=4"
(100 mm)
lbf in (Nm)
x=6"
(150 mm)
lbf in (Nm)
1224
(138)
x=8"
(200 mm)
lbf in (Nm)
1500
(170)
2076
(235)
x=10"
(250 mm)
lbf in (Nm)
1788
(202)
2448
(277)
5004
(566)
5256
(594)
x=12"
(300 mm)
lbf in (Nm)
2076
(234)
2832
(320)
5712
(645)
5952
(673)
x=14"
(350 mm)
lbf in (Nm)
2364
(267)
3192
(361)
6408
(724)
6660
(753)
15648
(1768)
x=16"
(400 mm)
lbf in (Nm)
2652
(299)
3564
(403)
7104
(803)
7356
(831)
16368
(1850)
x=18"
(450 mm)
lbf in (Nm)
2940
(332)
3948
(446)
7812
(883)
8052
(910)
18756
(2119)
x=20"
(500 mm)
lbf in (Nm)
3216
(363)
4320
(488)
8520
(962)
8748
(989)
20364
(2301)
mm
mm
25
32
40
50
63
x=6"
(150 mm)
lbf in (Nm)
204
x=8"
(200 mm)
lbf in (Nm)
252
x=10"
(250 mm)
lbf in (Nm)
312
x=12"
(300 mm)
lbf in (Nm)
360
x=14"
(350 mm)
lbf in (Nm)
420
x=16"
(400 mm)
lbf in (Nm)
480
x=18"
(450 mm)
lbf in (Nm)
528
x=20"
(500 mm)
lbf in (Nm)
588
(29)
(35)
(41)
(48)
(54)
(60)
(66)
10512
1272
1236
1404
1572
1740
1920
(99)
(119)
(139)
(158)
(178)
(197)
(217)
1164
1368
1596
1812
2040
2256
2472
Loading values applicable to a speed of 0.2 m/s. Maximum working life is normally reached below a speed of 1 m/s.
* The forces and moments refers to the center of the guide. They must not be exceeded in dynamic applications.
Mx
My
Mz
Fy
Fz
<
_
+
+
+
+
Mx max My max Mz max Fy max Fz max
ACT-107
ACTUATORS
C/146000 cylinder 20 to 80 mm
M/146000 cylinder 16 to 80 mm
A-B
AG
AC
R1
AE
20 mm
1
Y
B
C
2
Stroke
2 x A + Stroke
S1
O1
S
16 mm
ACTUATORS
Cushion screw
2
O1
Type
M/146016/...
16
A
2.46
(62.5)
3.34
(85)
AC
0.28
(7)
0.55
(14)
C/146020/...
20
Type
M/146016/...
16
C/146020/...
20
0.71
(18)
1.06
(27)
M3
M3
M5
M5
AE
1.50
(38)
2.13
(54)
O1
AG
0.31
(8)
0.71
(18)
P
0.98
(25)
1.26
(32)
1.26
(32)
1.50
(38)
0.47
(12)
0.73
(18.5)
1.06
(27)
1.57
(40)
B
0.69
(17.5)
0.91
(23)
R1
1.22
(31)
1.57
(40)
C
0.31
(8)
0.31
(8)
S
D
M5
M5
1/8 NPT
G1/8
S1
T
0.63
(16)
1.26
(32)
0.22
(5.5)
0.16
(4)
E
3.15
(80)
4.33
(110)
M3-5*
M3-5*
M5-12*
M5-12*
Y
0.16
(4)
0.47
(12)
F
2.36
(60)
3.15
(80)
Z
0.65
(16.5)
0.81
20.5
G
J
0.10
(2.5)
1.57
0.14
(40)
(3.5)
Weight
at 0 mm
0.35 lbs..
(0.35 kg)
1.10 lbs.
(0.50 kg)
* deep
ACT-108
KD7
0.12
(3)
0.17
(4.2)
Weight
per 100 mm
0.22 lbs.
(0.10 kg)
0.33 lbs.
(0.15 kg)
E1
M
T
5,3
AC
CA
AE
4
A
S
Stroke
6,5
O1
2 x A + Stroke
F
AG
Type
C/146025/...
25
C/146032/...
32
C/146040/...
40
C/146050/...
50
C/146063/...
63
Type
C/146025/...
25
C/146032/...
32
C/146040/...
40
C/146050/...
50
C/146063/...
63
A
3.94
(100)
4.72
(120)
5.91
(150)
7.09
(180)
8.46
(215)
M
1.26
(32)
1.77
(45)
1.77
(45)
1.97
(50)
1.97
(50)
AC
1.42
(36)
1.81
(46)
2.07
(52.5)
2.58
(65.5)
3.25
(82.5)
N
AE
2.20
(56)
2.99
(76)
3.54
(90)
4.33
(110)
4.92
(125)
AG
0.78
(20)
0.98
(25)
0.98
(25)
0.98
(25)
0.98
(25)
B
0.91
(23)
1.12
(28.5)
1.12
(28.5)
1.50
(38)
1.50
(38)
C
0.33
(8.5)
0.41
(10.5)
0.45
(11.5)
0.59
(15)
0.67
(17)
S
O1
M5
M5
M5
M5
M6
M6
M8
M8
M8
M8
1.57
(40)
2.05
(52)
2.56
(65)
3.15
(80)
3.74
(95)
1.81
(46)
2.20
(56)
2.68
(68)
3.31
(84)
3.82
(97)
0.63
(16)
0.79
(20)
0.79
(20)
1.00
(25.5)
0.98
(25)
1.89
(48)
2.36
(60)
2.93
(74.5)
3.50
(89)
4.13
(105)
CA
0.71
(18)
0.71
(18)
0.94
(24)
1.46
(37)
1.85
(47)
2.28
(58)
2.76
(70)
3.31
(84)
Stroke
Cushion screw
Main port
Main port
D
1/8 NPT
G1/8
1/4 NPT
G1/4
1/4 NPT
G1/4
3/8 NPT
G3/8
1/2 NPT
G1/2
T
E
5.12
(130)
6.30
(160)
8.46
(215)
9.84
(250)
12.60
(320)
W
E1
0.14
(3.5)
F
3.54
(90)
4.72
(120)
6.30
(160)
7.48
(190)
9.45
(240)
Z
M5-13*
M5-13*
M6-17*
M6-17*
M8-20*
M8-20*
M8-20*
M8-20*
M10-24*
M10-24*
0.63
(16)
0.79
(20)
0.98
(25)
1.18
(30)
1.38
(35)
0.28
(7)
0.31
(8)
0.31
(8)
0.43
(11)
0.43
(11)
0.63
(16)
0.79
(20)
0.98
(25)
1.16
(29.5)
1.38
(35)
80
Weight at 0 mm
29 lbs. (13.20 kg)
G
1.77
(45)
2.36
(60)
3.15
(80)
3.74
(95)
4.72
(120)
Weight
at 0 mm
1.5 lbs.
0.7 kg
3 lbs.
1.40 kg
5.5 lbs.
2.50 kg
9.7 lbs.
4.40 kg
15.2 lbs.
6.90 kg
J
0.19
(4.7)
0.28
(7)
0.28
(7)
0.37
(9.5)
0.37
(9.5)
KD7
0.20
(5)
0.28
(7)
0.28
(7)
0.35
(9)
0.35
(9)
Weight
per 100 mm
0.55 lbs.
0.25 kg
0.66 lbs.
0.30 kg
0.93 lbs.
0.42 kg
1.3 lbs.
0.62 kg
2 lbs.
0.9 kg
* deep
Type
C/146080/
15.35 (390)
11.81 (300)
9.45 (240)
10.24 (260)
2 x 10.24 (260) + Stroke
Stroke
M10
1.14 (29)
0.94 (24)
0.59 (15)
A-B
0.98 (25)
3.94 (100)
6.06 (154)
1.57 (40)
3.54 (90)
1/2 NPT
G 1/2
Cushion
screw
0.59 (15)
0.47 (12) E7
5.12 (130)
0.35 (9)
(11)
2.0 (50)
4.72 (120)
0.67 (17)
5.12 (130)
5.91 (150)
4.72 (120)
1.77 (45)
M12 x 26 dp
4.72 (120)
3.94 (100)
ACT-109
ACTUATORS
C/146100 cylinder 20 to 80 mm
M/146100 cylinder 16 to 80 mm
R2
AE
AD
AB
J
ACTUATORS
1
Stroke
2 x A + Stroke
Cushion screw
Type
AB
AE
AD
R2
M/146116/...
16
C/146120/...
20
2.46
(62.5)
3.35
(85)
2.36
(60)
1.50
(38)
2.32
(59)
0.30
(7.5)
0.26
(6.5)
3.15
(80)
4.33
(110)
0.71
(18)
1.06
(27)
0.30
(7.5)
0.22
(5.5)
1.22
(31)
1.65
(42)
0.73
(18.5)
0.94
(24)
0.22
(5.5)
0.20
(5)
0.47
(12)
ACT-110
Weight
at 0 mm
0.31 oz.
0.18 kg
1.3 oz.
0.60 kg
Weight
per 100 mm
0.22 lbs.
0.10 kg
0.33 lbs.
0.15 kg
E1
L
ED
EC
AE
R2
EF
AB
Stroke
2 x A + Stroke
EB
EA
AF 9
Type
AB
AE
AF
C/146125/..
25
32
C/146140/..
40
C/146150/..
50
C/146163/..
63
2.76
(70)
3.54
(90)
4.72
(120)
6.30
(160)
7.48
(190)
2.66
(67.5)
3.23
(82)
3.84
(97.5)
4.59
(116.5)
5.39
(137)
M5
C/146132/..
3.94
(100)
4.72
(120)
5.91
(150)
7.09
(180)
8.46
(215)
1/8 NPT
G1/8
1/4 NPT
G1/4
1/4 NPT
G1/4
3/8 NPT
G3/8
1/2 NPT
G1/2
M5
M6
M8
M8
E1
EA
0.05
5.12
1.97
(130)
(50)
6.30 0.16 2.76
(160) (4)
(70)
8.46
4.13
(215)
(105)
9.84
5.31
(250)
(135)
12.60
5.91
(320)
(150)
EB
ED
EC
EF
R2
4.02
(102)
5.43
(138)
7.60
(193)
8.98
(228)
11.50
(292)
1.26
(32)
1.77
(45)
1.77
(45)
1.97
(50)
1.97
(50)
0.79
(20)
0.98
(25)
0.98
(25)
0.98
(25)
0.98
(25)
1.34
(34)
1.44
(36.5)
1.69
(43)
1.87
(47.5)
2.32
(59)
0.20
(5)
0.20
(5)
0.20
(5)
0.26
(6.5)
0.30
(7.5)
0.22
(5.5)
0.22
(5.5)
0.26
(6.6)
0.35
(9)
0.35
(9)
2.05
(52)
2.52
(64)
3.11
(79)
3.62
(92)
4.33
(110)
2.05
(52)
2.36
(60)
2.83
(72)
3.33
(84.5)
0.37
(9.5)
0.26
(6.5)
0.37
(9.5)
0.45
(11.5)
0.65
(16.5)
Weight
at 0 mm
1.7 lbs.
0.75kg
3.3 lbs.
1.50 kg
5.7 lbs.
2.60 kg
10 lbs.
4.50 kg
16 lbs.
7.20kg
Weight
per 100 mm
0.44 lbs.
0.20 kg
0.66 lbs.
0.30 kg
0.93 lbs.
0.42 kg
1.4 lbs.
0.62 kg
2 lbs.
0.90 kg
0.98 (25)
6.50 (165)
1/2 NPT
(G1/2)
10.24 (260)
0.98 (25)
5.12 (130)
3.19 (81)
0.47 (12) E7
1.50 (38)
0.43 (11)
0.39 (10)
4.72 (120)
Stroke
2 x A + Stroke
Type
C/146180/
80
Weight at 0 mm
29.5 lbs. (13.40 kg)
ACT-111
ACTUATORS
ACTUATORS
C/146100/MD cylinder with external adjustable guide and double carriages( 20 mm)
M/146100/MD cylinder with external adjustable guide and double carriages( 16 and 20 mm)
E
X
A
2 x A + X + Stroke
Type
M/146116/D
16
C/146120/D
20
ACT-112
A
2.46
(62.5)
3.35
(85)
E
3.15
(80)
4.33
(110)
X min.
3.15
(80)
4.33
(110)
X max.
19.69
(500)
19.69
(500)
Weight at 0 mm
0.44 lbs.
0.20 kg
1.75 lbs.
0.80 kg
C/146100/MD cylinder with external adjustable guide and double carriages ( 25 ... 63 mm)
X
E
E1
A
2 x A + X + Stroke
Type
C/146125/MD
25
C/146132/MD
32
C/146140/MD
40
C/146150/MD
50
C/146163/MD
63
A
3.94
(100)
4.72
(120)
5.91
(150)
7.09
(180)
8.46
(215)
E
5.12
(130)
6.30
(160)
8.46
(215)
9.84
(250)
12.60
(320)
E1
0.16
(4)
X min.=E*
5.12
(130)
6.61
(168)
8.46
(215)
9.84
(250)
12.60
(320)
X max.
19.69
(500)
19.69
(500)
19.69
(500)
19.69
(500)
19.69
(500)
Weight at 0 mm
3.3 lbs.
1.50 kg
4.4 lbs.
2.00 kg
7 lbs.
3.20 kg
12 lbs.
5.40 kg
18.5 lbs.
8.40 kg
C/146180/MD cylinder with external adjustable guide and double carriages ( 80 mm)
X
260
2 x A + X + Stroke
Type
C/146180/D
80
A
10.53 (260)
X min.
15.4 (390)
X max.
19.7 (500)
Weight at 0 mm
35 lbs. (15.90 kg)
ACT-113
ACTUATORS
C/146200 cylinder 25 to 63 mm
CC
CD
CE
CF
ACTUATORS
Stroke
2 x A + Stroke
CB
EA
CA
For lubrication
CA
CB
CC
CD
CE
CF
CG
CH
C/146225/...
25
C/146232/...
32
C/146240/...
40
C/146250/...
50
C/146263/...
63
3.94
(100)
4.72
(120)
5.91
(150)
7.09
(180)
8.46
(215)
1.77
(45)
2.36
(60)
3.15
(80)
3.54
(90)
4.72
(120)
3.54
(90)
4.72
(120)
5.91
(150)
7.09
(180)
9.45
(240)
M6-14*
M6-14*
M8-16*
M8-16*
M8-16*
M8-16*
M10-20*
M10-20*
M10-20*
M10-20*
1.42
(36)
1.50
(38)
1.65
(42)
1.73
(44)
1.85
(47)
1.65
(42)
1.97
(50)
2.26
(57.5)
2.64
(67)
2.93
(74.5)
2.60
(66)
3.15
(80)
3.74
(95)
4.39
(111.5)
5.00
(127)
2.36
(60)
2.95
(75)
3.62
(92)
3.94
(100)
4.33
(110)
3.35
(85)
3.86
(98)
4.65
(118)
5.20
(132)
5.51
(140)
1/8 NPT
G1/8
1/4 NPT
G1/4
1/4 NPT
G1/4
3/8 NPT
G3/8
1/2 NPT
G1/2
5.91
(150)
7.09
(180)
8.46
(215)
9.84
(250)
12.60
(320)
ACT-114
EA
0.05
2.76
(70)
3.54
(90)
4.53
(115)
5.31
(135)
7.87
(200)
Weight
at 0 mm
3.3 lbs.
1.50 kg
6 lbs.
2.80 kg
10 lbs.
4.50 kg
18 lbs.
8.20 kg
28 lbs.
12.50 kg
Weight
per 100 mm
0.44 lbs.
0.20 kg
0.88 lbs.
0.40 kg
1 lbs.
0.45 kg
2 lbs.
0.90 kg
2.2 lbs.
1.00 kg
C/146200/MD
25 to 63 mm
A
2 x A + X + Stroke
Type
X min.
X max.
C/146225/MD/...
25
C/146232/MD/...
32
C/146240/MD/...
40
C/146250/MD/...
50
C/146263/MD/...
63
3.94
(100)
4.72
(120)
5.91
(150)
7.09
(180)
8.46
(215)
5.91
(150)
7.09
(180)
8.46
(215)
9.84
(250)
12.60
(320)
5.91
(150)
7.09
(180)
8.46
(215)
9.84
(250)
12.60
(320)
19.69
(500)
19.69
(500)
19.69
(500)
19.69
(500)
19.69
(500)
Weight
at 0 mm
5.7 lbs.
2.60 kg
9.3 lbs.
4.20 kg
15 lbs.
7.00 kg
24 lbs.
11.1 kg
45 lbs.
20.6 kg
Weight
per 100 mm
0.44 lbs.
0.20 kg
0.88 lbs.
0.40 kg
1 lbs.
0.45 kg
2 lbs.
0.90 kg
2.2 lbs.
1.00 kg
ACT-115
ACTUATORS
C/146000/L3
25 to 63 mm
G 1/8
AZ
AR
AK
AM
AY
AO
AU
AN
AP
AL
CO
ACTUATORS
AF
AG
Type
C/146025/L3 25
C/146032/L3 32
C/146040/L3 40
C/146050/L3 50
C/146063/L3 63
AF
AG
AK
AL
AM
AN
AO
AP
AR
AU
AY
AZ
CO
2.44
(62)
3.07
(78)
3.70
(94)
4.41
(112)
4.45
(113)
2.95
(75)
3.62
(92)
4.41
(112)
5.20
(132)
5.91
(150)
0.47
(12)
0.47
(12)
0.47
(12)
0.47
(12)
0.47
(12)
2.05
(52)
2.52
(64)
3.19
(81)
3.70
(94)
4.41
(112)
1.12
(28.5)
1.14
(29)
1.36
(34.5)
1.40
(35.5)
1.67
(42.5)
2.89
(73.5)
3.54
(90)
4.07
(103.5)
4.90
(124.5)
5.53
(140.5)
0.53
(13.5)
0.55
(14)
0.53
(13.5)
0.57
(14.5)
0.61
(15.5)
1.77
(45)
2.17
(55)
2.56
(65)
2.95
(75)
3.54
(90)
1.48
(37.5)
1.73
(44)
2.01
(51)
2.34
(59.5)
2.68
(68)
2.87
(73)
3.52
(89.5)
4.06
(103)
4.88
(124)
5.51
(140)
0.65
(16.5)
0.69
(17.5)
0.71
(18)
0.73
(18.5)
0.81
(20.5)
1.18
(30)
1.28
(32.5)
2.07
(52.5)
2.56
(65)
4.53
(115)
0.24
(6)
0.24
(6)
0.24
(6)
0.24
(6)
0.24
(6)
5.12
(130)
6.30
(160)
8.46
(215)
9.84
(250)
12.60
(320)
3.54
(90)
4.72
(120)
6.30
(160)
7.48
(190)
9.45
(240)
1.77
(45)
2.36
(60)
3.15
(80)
3.74
(95)
4.72
(120)
ACT-116
U Weight
at 0 mm
0.26 3.5 lbs.
(6.6) 1.60 kg
0.35 5.5 lbs.
(9) 2.50 kg
0.35 9.3 lbs.
(9) 4.20 kg
0.43 15 lbs.
(11) 6.90 kg
0.51 25 lbs.
(13) 11.5 kg
Weight
per 100 mm
0.44 lbs.
0.2 kg
0.75 lbs.
0.35 kg
1.1 lbs.
0.50 kg
1.7 lbs.
0.75 kg
2.2 lbs.
1.0 kg
C/146200/L3 cylinder with precision roller guide and active brake ( 25 ... 63 mm)
G 1/8
AZ
AR
AK
AY
AL
CO
AM
AO
AN
AP
AF
AG
C/146225/L3 25
C/146232/L3 32
C/146240/L3 40
C/146250/L3 50
C/146263/L3 63
AF
AG
AK
AL
AM
AN
AO
AP
AR
AU
AY
AZ
CO
2.44
(62)
3.07
(78)
3.70
(94)
4.41
(112)
5.20
(132)
2.95
(75)
3.62
(92)
4.41
(112)
5.20
(132)
5.91
(150)
0.47
(12)
0.47
(12)
0.47
(12)
0.47
(12)
0.47
(12)
2.05
(52)
2.52
(64)
3.19
(81)
3.70
(94)
4.41
(112)
1.12
(28.5)
1.14
(29)
1.36
(34.5)
1.40
(35.5)
1.67
(42.5)
3.13
(79.5)
3.70
(94)
4.27
(108.5)
4.98
(126.5)
5.61
(142.5)
0.53
(13.5)
0.55
(14)
0.53
(13.5)
0.57
(14.5)
0.61
(15.5)
1.57
(40)
2.17
(55)
2.56
(65)
2.95
(75)
3.15
(80)
1.48
(37.5)
1.73
(44)
2.01
(51)
2.34
(59.5)
2.68
(68)
2.87
(73)
3.52
(89.5)
4.06
(103)
4.88
(124)
5.51
(140)
0.65
(16.5)
0.69
(17.5)
0.71
(18)
0.73
(18.5)
0.81
(20.5)
1.18
(30)
1.28
(32.5)
2.07
(52.5)
2.56
(65)
4.53
(115)
0.24
(6)
0.24
(6)
0.24
(6)
0.24
(6)
0.24
(6)
5.12
(130)
6.30
(160)
8.46
(215)
9.84
(250)
12.60
(320)
3.54
(90)
4.72
(120)
6.30
(160)
7.48
(190)
9.45
(240)
1.77 0.26
(45) (6.6)
2.36 0.35
(60) (9)
3.15 0.35
(80) (9)
3.74 0.43
(95) (11)
4.72 0.51
(120) (13)
Weight
at 0 mm
3.4 lbs.
1.55 kg
8.6 lbs.
3.90 kg
13.7 lbs.
6.20 kg
23.6 lbs.
10.70 kg
25.4 lbs.
11.50 kg
Weight
per 100 mm
0.44 lbs.
0.2 kg
0.75 lbs.
0.35 kg
1.1 lbs.
0.50 kg
1.7 lbs.
0.75 kg
2.2 lbs.
1.00 kg
Theoretical forces, air consumption, cushioning length, holding forces for active brake
Cylinder
mm
25
32
40
50
63
Cushioning length
inches (mm)
1 (26)
1.4 (35)
2 (50)
2.3 (60)
2.8 (70)
ACT-117
ACTUATORS
C/146000/L4
25 to 63 mm
AK
AY
AO
U
G 1/8
AR
AU
AM
AN
AP
CO
ACTUATORS
AL
AZ
AF
F
AG
Type
C/146025/L4 25
C/146032/L4 32
C/146040/L4 40
C/146050/L4 50
C/146063/L4 63
AF
AG
AK
AL
AM
AN
AO
AP
AR
AU
AY
AZ
CO
2.44
(62)
3.07
(78)
3.70
(94)
4.41
(112)
5.20
(132)
2.95
(75)
3.62
(92)
4.41
(112)
5.20
(132)
5.91
(150)
0.87
(22)
0.94
(24)
0.94
(24)
1.18
(30)
1.18
(30)
2.05
(52)
2.52
(64)
3.19
(81)
3.70
(94)
4.41
(112)
1.52
(38.5)
1.61
(41)
1.83
(46.5)
2.11
(53.5)
2.38
(60.5)
3.29
(83.5)
4.02
(102)
4.55
(115.5)
5.61
(142.5)
6.24
(158.5)
0.93
(23.5)
1.02
(26)
1.00
(25.5)
1.28
(32.5)
1.32
(33.5)
1.77
(45)
2.17
(55)
2.56
(65)
2.95
(75)
3.54
(90)
1.87
(47.5)
2.20
(56)
2.48
(63)
3.05
(77.5)
3.39
(86)
3.27
(83)
4.00
(101.5)
4.53
(115)
5.59
(142)
6.22
(158)
1.04
(26.5)
1.16
(29.5)
1.18
(30)
1.44
(36.5)
1.52
(38.5)
1.18
(30)
1.28
(32.5)
2.07
(52.5)
2.56
(65)
4.53
(115)
0.63
(16)
0.71
(18)
0.71
(18)
0.94
(24)
1.65
(42)
5.12
(130)
6.30
(160)
8.46
(215)
9.84
(250)
12.60
(320)
3.54
(90)
4.72
(120)
6.30
(160)
7.48
(190)
9.45
(240)
1.77
(45)
2.36
(60)
3.15
(80)
3.74
(95)
4.72
(120)
ACT-118
U Weight
at 0 mm
0.26 4.2 lbs.
(6.6) 1.90 kg
0.35 5.7 lbs.
(9) 2.60 kg
0.35 10.4 lbs.
(9) 4.70 kg
0.43 15.9 lbs.
(11) 7.20 kg
0.51 27.3 lbs.
(13) 12.40 kg
Weight
per 100 mm
0.44 lbs.
0.2 kg
0.77 lbs.
0.35 kg
1.1 lbs.
0.50 kg
1.7 lbs.
0.75 kg
2.2 lbs.
1.0 kg
C/146200/L4 cylinder with precision roller guide and passive brake ( 25 ... 63 mm)
AR
AK
G 1/8
AY
CO
AM
AO
AN
AP
AL
AZ
AF
F
AG
Type
C/146225/L4 25
C/146232/L4 32
C/146240/L4 40
C/146250/L4 50
C/146263/L4 63
AF
AG
AK
AL
AM
AN
AO
AP
AR
AU
AY
AZ
CO
2.44
(62)
3.07
(78)
3.70
(94)
4.41
(112)
5.20
(132)
2.95
(75)
3.62
(92)
4.41
(112)
5.20
(132)
5.91
(150)
0.87
(22)
0.94
(24)
0.94
(24)
1.18
(30)
1.18
(30)
2.05
(52)
2.52
(64)
3.19
(81)
3.70
(94)
4.41
(112)
1.52
(38.5)
1.61
(41)
1.83
(46.5)
2.11
(53.5)
2.38
(60.5)
3.52
(89.5)
4.17
(106)
4.74
(120.5)
5.69
(144.5)
6.32
(160.5)
0.93
(23.5)
1.02
(26)
1.00
(25.5)
1.28
(32.5)
1.32
(33.5)
1.57
(40)
2.17
(55)
2.56
(65)
2.95
(75)
3.15
(80)
1.87
(47.5)
2.20
(56)
2.48
(63)
3.05
(77.5)
3.39
(86)
3.27
(83)
4.00
(101.5)
4.53
(115)
5.59
(142)
6.22
(158)
1.04
(26.5)
1.16
(29.5)
1.18
(30)
1.44
(36.5)
1.52
(38.5)
1.18
(30)
1.28
(32.5)
2.07
(52.5)
2.56
(65)
4.53
(115)
0.63
(16)
0.71
(18)
0.71
(18)
0.94
(24)
0.94
(24)
5.12
(130)
6.30
(160)
8.46
(215)
9.84
(250)
12.60
(320)
3.54
(90)
4.72
(120)
6.30
(160)
7.48
(190)
9.45
(240)
1.77 0.26
(45) (6.6)
2.36 0.35
(60) (9)
3.15 0.35
(80) (9)
3.74 0.43
(95) (11)
4.72 0.51
(120) (13)
Weight
at 0 mm
4.2 lbs.
1.90 kg
8.8 lbs.
4.00 kg
14.8 lbs.
6.70 kg
24 lbs.
11.00 kg
27 lbs.
12.40 kg
Weight
per 100 mm
0.44 lbs.
0.20 kg
0.77 lbs.
0.35 kg
1.1 lbs.
0.50 kg
1.7 lbs.
0.75 kg
2.2 lbs.
1.00 kg
Theoretical forces, air consumption, cushioning length, holding forces for passive brake
Cylinder
mm
25
32
40
50
63
Cushioning length
inches (mm)
1 (26)
1.4 (35)
2 (50)
2.3 (60)
2.8 (70)
ACT-119
ACTUATORS
Center support V
QM/1460XX/32
AA
1
AM
AK
AE
TOP
AE
AD
AH
AB
U1
AJ
AF
AC
Type*
QM/146016/21 16
QM/146020/21 20
QM/146025/21 25
QM/146032/21 32
QM/146040/21 40
QM/146050/21 50
QM/146063/21 63
QM/146080/21 80
AA
0.63
(16)
0.67
(17)
0.71
(18)
1.02
(26)
1.18
(30)
1.65
(42)
1.89
(48)
2.52
(64)
AB
0.39
(10)
0.20
(5)
0.28
(7)
0.43
(11)
0.43
(11)
0.47
(12)
0.51
(13)
0.49
(12.5)
AC
0.59
(15)
0.39
(10)
0.59
(15)
0.87
(22)
0.87
(22)
0.98
(25)
0.98
(25)
0.98
(25)
AD
0.12
(3)
0.39
(10)
0.53
(13.5)
0.65
(16.5)
0.77
(19.5)
0.94
(24)
1.08
(27.5)
1.38
(35)
AE
0.63
(16)
0.85
(21.5)
0.94
(24) (26.5)
1.20
(30.5) (33)
1.48
(37.5) (40.5)
1.77
(45) (49)
2.13
(54) (57.5)
2.76
(70)
R
1.06
(27)
1.57
(40)
1.89
(48)
2.36
(60)
2.95
(75)
3.54
(90)
4.13
(105)
5.12
(130)
AG
U
0.22
(5.5)
0.22
(5.5)
0.28
(7)
0.35
(9)
0.35
(9)
0.43
(11)
0.51
(13)
0.55
(14)
Wt.
0.03 lbs.
0.01 kg.
0.06 lbs.
0.03 kg.
0.22 lbs.
0.1 kg.
0.22 lbs.
0.1 kg.
0.44 lbs.
0.2 kg.
0.66 lbs.
0.3 kg.
0.88 lbs.
0.4 kg.
0.88 lbs.
0.4 kg.
Attention: When Foot mounts are used with a Center support mounting the word TOP should be
visible on the top face of the mount. This will change the AE dimension as shown below.
Type*
QM/146025/21 25
QM/146032/21 32
QM/146040/21 40
QM/146050/21 50
QM/146063/21 63
AE
1.04
(26.5)
1.30
(33)
1.59
(40.5)
1.93
(49)
2.26
(57.5)
Type**
QM/146016/32
AE
16 0.63
(16)
QM/146020/32 20 0.85
(21.5)
QM/146025/32 25 1.04
(26.5)
QM/146032/32 32 1.20
(30.5)
QM./146040/32 40 1.48
(37.5)
QM/146050/32 50 1.77
(45)
QM/146063/32 63 2.13
(54)
QM/146080/32 80 2.76
(70)
AF
1.57
(40)
2.05
(52)
2.36
(60)
2.99
(76)
3.62
(92)
4.33
(110)
5.20
(132)
6.10
(155)
AG
1.97
(50)
2.44
(62)
2.83
(72)
3.62
(92)
4.25
(108)
5.04
(128)
6.06
(154)
7.09
(180)
AH
0.79
(20)
1.77
(45)
2.36
(60)
2.76
(70)
3.54
(90)
4.33
(110)
4.72
(120)
5.51
(140)
AJ
1.18
(30)
2.36
(60)
3.15
(80)
3.94
(100)
4.72
(120)
5.51
(140)
6.30
(160)
7.09
(180)
AK
0.14
(3.5)
0.18
(4.5)
0.22
(5.5)
0.26
(6.5)
0.30
(7.5)
0.30
(7.5)
0.35
(9)
0.47
(12)
AM
0.35
(9)
0.47
(12)
0.51
(13)
0.53
(13.5)
0.73
(18.5)
0.73
(18.5)
0.98
(25)
1.11
(28.3)
U1
0.22
(5.5)
0.22
(5.5)
0.26
(6.6)
0.35
(9)
0.35
(9)
0.43
(11)
0.51
(13)
0.55
(14)
D
0.17
(4.25)
0.17
(4.25)
0.25
(6.25)
0.30
(7.5)
0.30
(7.5)
E
0.31
(8)
0.31
(8)
0.41
(10.5)
0.53
(13.5)
0.53
(13.5)
Weight
0.02 lbs.
0.01 kg.
0.02 lbs.
0.01 kg.
0.04 lbs.
0.02 kg.
0.07 lbs.
0.03 kg.
0.07 lbs.
0.03 kg.
D
0.17
(4.25)
E
0.31
(8)
Weight
0.02 lbs.
0.01 kg.
25
M/P74065
32
M/P74066
40
M/P41858
50
M/P41858
63
A
0.16
(4)
0.16
(4)
0.18
(4.5)
0.30
(7.5)
0.30
(7.5)
B
M5
M5
M5
M5
M6
M6
M8
M8
M8
M8
C
0.47
(12)
0.47
(12)
0.67
(17)
0.91
(23)
0.91
(23)
25 - 63
A
0.16
(4)
B
M5
M5
C
0.47
(12)
A
D
ACTUATORS
ACT-120
Wt.
0.03 lbs.
0.01 kg.
0.07 lbs.
0.03 kg.
0.09 lbs.
0.04 kg.
0.16 lbs.
0.07 kg.
0.44 lbs.
0.2 kg.
0.44 lbs.
0.2 kg.
0.66 lbs.
0.3 kg.
0.88 lbs.
0.4 kg.
16
QM/146020/34
20
QM/146025/34
25
QM/146032/34
32
QM/146040/34
40
QM/146050/34
50
QM/146063/34
63
QM/146080/34
80
AE
0.63
(16)
0.85
(21.5)
1.04
(26.5)
1.30
(33)
1.59
(40.5)
1.93
(49)
2.26
(57.5)
2.76
(70)
AM 1
U 1
Type
QM/146016/34
AK 1
AE
AN
AP
AL
AF
AG
AF
1.57
(40)
2.05
(52)
2.36
(60)
3.07
(78)
3.70
(94)
4.41
(112)
5.20
(132)
6.10
(155)
AG
1.97
(50)
2.44
(62)
2.95
(75)
3.62
(92)
4.41
(112)
5.20
(132)
5.91
(150)
7.09
(180)
AK1
0.14
(3.5)
0.22
(5.5)
0.22
(5.5)
0.26
(6.5)
0.30
(7.5)
0.31
(8)
0.39
(10)
0.39
(10)
AL
1.22
(31)
1.65
(42)
2.05
(52)
2.52
(64)
3.19
(81)
3.70
(94)
4.41
(112)
5.20
(132)
AM1
0.33
(8.5)
0.57
(14.5)
0.69
(17.5)
0.71
(18)
0.94
(24)
0.98
(25)
1.26
(32)
1.26
(32)
AN
1.59
(40.5)
2.20
(56)
2.46
(62.5)
3.11
(79)
3.66
(93)
4.49
(114)
5.12
(130)
6.26
(159)
AP
1.18
(30)
1.42
(36)
1.77
(45)
2.17
(55)
2.56
(65)
2.95
(75)
3.54
(90)
3.94
(100)
E
3.15
(80)
4.33
(110)
5.12
(130)
6.30
(160)
8.46
(215)
9.84
(250)
12.60
(320)
15.35
(390)
F
G
U1
2.36
0.22
(60)
(5.5)
3.15 1.57 0.22
(80) (40) (5.5)
3.54 1.77 0.26
(90) (45) (6.6)
4.72 2.36 0.35
(120) (60) (9)
6.30 3.15 0.35
(160) (80) (9)
7.48 3.74 0.43
(190) (95) (11)
9.45 4.72 0.51
(240) (120) (13)
11.81 5.91 0.55
(300) (150) (14)
Wt
0.22 lbs.
0.1 kg.
0.44 lbs.
0.2 kg.
0.66 lbs.
0.3 kg.
0.88 lbs.
0.4 kg.
1.76 lbs.
0.8 kg.
2.5 lbs.
1.2 kg.
4.4 lbs.
2 kg.
6.4 lbs.
2.9 kg.
Swinging bridge S
QM/1460XX/37
For cylinders with internal guiding only
Fx
AS
AU
AW
AT
16
QM/146020/37
20
QM/146025/37
25
QM/146032/37
32
QM/146032/37
40
QM/146050/37
50
QM/146050/37
63
QM/146080/37
80
IE
AX
AV
AR
+ 8
-
5 mm
AQ
Type
QM/146016/37
AQ
1.57
(40)
1.97
(50)
2.36
(60)
3.15
(80)
3.15
(80)
3.94
(100)
3.94
(100)
3.94
(100)
AR
1.38
(35)
1.57
(40)
1.97
(50)
1.97
(50)
2.36
(60)
2.36
(60)
2.36
(60)
AS
1.02
(26)
1.50
(38)
1.73
(44)
2.32
(59)
2.32
(59)
2.56
(65)
2.56
(65)
2.56
(65)
AT
DIN74-Bm5
DIN74-Bm5
DIN74-Bm6
DIN74-Bm6
DIN74-Bm8
DIN74-Bm8
DIN74-Bm8
AU
0.47
(12)
0.79
(20)
0.79
(20)
1.18
(30)
1.18
(30)
1.57
(40)
1.57
(40)
1.57
(40)
AV
1.18
(30)
1.57
(40)
1.77
(45)
2.36
(60)
2.36
(60)
3.15
(80)
3.15
(80)
3.15
(80)
AW
M4
M4
M5
M5
M5
M5
M6
M6
M6
M6
M8
M8
M8
M8
M8
M8
AX
0.16
(4)
0.20
(5)
0.20
(5)
0.22
(5.5)
0.22
(5.5)
0.26
(6.5)
0.26
(6.5)
0.26
(6.5)
IE
48+4
65.5+5
70+5
88.5+5
102.5+5
124+5
139+5
168.5+5
Fx
(N)
22 lbf.
100 N
34 Ibf.
150 N
56 Ibf.
250 N
92 Ibf.
410 N
144 Ibf.
640 N
225 lbf.
1000 N
337 lbf.
1500 N
540 lbf.
2400 N
Wt.
0.04 lbs.
0.02 kg.
0.22 lbs.
0.1 kg.
0.44 lbs.
0.2 kg.
0.66 lbs.
0.3 kg.
0.66 lbs.
0.3 kg.
1.1 lbs.
0.5 kg
1.1 lbs.
0.5 kg.
1.1 lbs.
0.5 kg.
ACT-121
ACTUATORS
BM
1
Type (W)
QM/146120/35
Type (UW)
QM/146120/36
20
QM/146125/35
QM/146125/36
25
QM/146132/35
QM/146132/36
32
QM/146140/35
QM/146140/36
40
QM/146150/35
QM/146150/36
50
QM/146163/35
QM/146163/36
63
AE
2.32
(59)
2.66
(67.5)
3.23
(82)
3.84
(97.5)
4.61
(117)
5.39
(137)
BG
M 5 x 10*
M 5 x 10*
M 5 x 12*
M 6 x 12*
M 6 x 15*
M 8 x 20*
BJ
2.13
(54)
2.48
(63)
3.03
(77)
3.03
(77)
3.86
(98)
4.63
(117.5)
BK
1.30
(33)
1.46
(37)
1.77
(45)
2.30
(58.5)
2.81
(71.5)
3.33
(84.5)
BL
3.07
(78)
3.39
(86)
4.06
(103)
4.69
(119)
5.63
(143)
7.01
(178)
BM
2.17
(55)
2.56
(65)
3.15
(80)
3.54
(90)
4.72
(120)
5.51
(140)
E
4.33
(110)
5.12
(130)
6.30
(160)
8.46
(215)
9.84
(250)
12.60
(320)
BL
AE
HC
BG
BK
HB
ACTUATORS
Secondary carriage W
F
3.15
(80)
3.54
(90)
4.72
(120)
6.30
(160)
7.48
(190)
9.45
(240)
G
1.57
(40)
1.77
(45)
2.36
(60)
3.15
(80)
3.74
(95)
4.72
(120)
HB
3.11
(79)
3.43
(87)
4.09
(104)
4.72
(120)
5.67
(144)
6.65
(169)
HC
2.52
(64)
3.03
(77)
3.70
(94)
4.33
(110)
5.16
(131)
6.06
(154)
L
1.65
(42)
2.05
(52)
2.52
(64)
3.11
(79)
3.62
(92)
4.33
(110)
M
1.06
(27)
1.26
(32)
1.77
(45)
1.77
(45)
1.97
(50)
1.97
(50)
W
0.42 lb.
0.19 kg
0.60 lbs.
0.27 kg
1.10 lbs.
0.50 kg
1.43 lbs.
0.65 kg
2.43 lbs.
1.10 kg
4.19 lbs.
1.90 kg
*1 deep
ACT-122
UW
0.55 lbs.
0.25 kg
0.73 lbs.
0.33 kg
1.10 lbs.
0.50 kg
2.38 lbs.
1.08 kg
4.08 lbs.
1.85 kg
7.63 lbs.
3.46 kg
3
SD
SW
SM
SN
SU
SX
SW
SU
SX
SD
0.2 (5)
SB
SN
SM
Cylinder
External guide
C/146125
25
C/146132
32
C/146140
40
C/146150
50
C/146163
63
C/146180
80
Cylinder
Roller guide
C/146225
25
C/146232
32
C/146240
40
C/146250
50
C/146263
63
QM/146132/67
QM/146140/67
QM/146150/67
QM/146163/67
QM/146180/67
QM/146132/67
QM/146140/67
M/P41434
QM/146150/67
M/P41435
QM/146163/67
M/P41436
Assembly kit
SB
SD
SC
SM
SN
SU
SW
SX
1.89
(48)
2.36
(60)
2.95
(75)
3.54
(90)
4.13
(105)
5.12
(130)
R
1.79
(45.5)
1.59
(40.5)
3.21
(81.5)
2.72
(69)
2.72
(69)
3.35
(85)
SB
0.47
(12)
0.47
(12)
0.59
(15)
0.59
(15)
0.59
(15)
0.79
(20)
SD
SC
0.75
(19)
0.94
(24)
1.14
(29)
1.30
(33)
1.61
(41)
2.09
(53)
SM
1.93
(49)
2.40
(61)
2.91
(74)
3.58
(91)
4.15
(105.5)
5.14
(130.5)
SN
2.74
(69.5)
3.21
(81.5)
4.31
(109.5)
5.02
(127.5)
5.57
(141.5)
6.83
(173.5)
SU
0.67
(17)
0.67
(17)
1.18
(30)
1.18
(30)
1.18
(30)
1.57
(40)
SW
M14x1.5
M14x1.5
M14x1.5
M14x1.5
M25x1.5
M25x1.5
M25x1.5
M25x1.5
M25x1.5
M25x1.5
M33x1.5
M33x1.5
SX
1.89
(48)
2.36
(60)
2.95
(75)
4.13
(105)
5.12
(130)
1.79
(45.5)
1.59
(40.5)
3.21
(81.5)
2.72
(69)
2.72
(69)
0.47
(12)
0.47
(12)
0.59
(15)
0.59
(15)
0.59
(15)
1.22
(31)
1.42
(36)
1.38
(35)
0.75
(19)
0.94
(24)
1.14
(29)
1.30
(33)
1.61
(41)
1.93
(49)
2.40
(61)
2.91
(74)
3.58
(91)
4.15
(105.5)
2.74
(69.5)
3.21
(81.5)
4.31
(109.5)
5.02
(127.5)
5.57
(141.5)
0.67
(17)
0.67
(17)
1.18
(30)
1.18
(30)
1.18
(30)
M14x1.5
M14x1.5
M14x1.5
M14x1.5
M25x1.5
M25x1.5
M25x1.5
M25x1.5
M25x1.5
M25x1.5
ACT-123
ACTUATORS
ACTUATORS
ACT-124
10
7&9
Internal
External
Roller
For C/146000. .../M. C/146200. .../M Internally and Roller guided models
20
25
32
40
50
63
80
Type
C/146020..../M
C/146025..../M. C/146225..../M
C/146032..../M. C/146232..../M
C/146040..../M. C/146240..../M
C/146050..../M. C/146250..../M
C/146063..../M. C/146263..../M
C/146080..../M
QM/146020/00
QM/146025/00
QM/146032/00
QM/146040/00
QM/146050/00
QM/146063/00
QM/146080/00
Comprising
Item
1
2+3
4+5
6
8
10
Description
Clamping lever ( 25 ... 63)
Seal-/cover strip
O-ring
Seal
Seal
Wiper
Grease
Quantity
2
1
2
2
2
1
1
Description
Quantity
Seal strip
Item 2
C/P 40262/*
C/P 40262/*
C/P 40344/*
C/P 40263/*
C/P 40626/*
C/P 40626/*
C/P 40715/*
Cover strip
Item 3
C/P 74223/*
C/P 74131/*
C/P73936/*
C/P73945/*
C/P73946/*
C/P73946/*
C/P 74232/*
20
25
32
40
50
63
80
Type
C/146120..../M
C/146125..../M
C/146132..../M
C/146140..../M
C/146150..../M
C/146163..../M.
C/146180..../M
QM/146120/00
QM1/46125/00
QM/146132/00
QM/146140/00
QM/146150/00
QM/146163/00
QM/146180/00
Comprising
Item
1
2+3
4+5
6
7
8
9
10
2
1
2
2
4
2
2
1
1
Seal strip
Item 2
C/P 40262/*
C/P 40262/*
C/P 40344/*
C/P 40263/*
C/P 40626/*
C/P 40626/*
C/P 40715/*
Cover strip
Item 3
C/P 74223/*
C/P 74131/*
C/P73936/*
C/P73945/*
C/P73946/*
C/P 73946/*
C/P 74232/*
ACT-125
ACTUATORS
ACTUATORS
10
7&9
Internal
External
Roller
For M/146000. .../M. M/146200. .../M Internally and Roller guided models
16
20
25
32
40
50
63
80
Type
M/146016..../M
M/146020..../M
M/146025..../M. M/146225..../M
M/146032..../M. M/146232..../M
M/146040..../M. M/146240..../M
M/146050..../M. M/146250..../M
M/146063..../M. M/146263..../M
M/146080..../M
Metric
spares kit
QM/146016/00
QM/146020/00
QM/146025/00
QM/146032/00
QM/146040/00
QM/146050/00
QM/146063/00
QM/146080/00
Comprising
Item
1
2+3
4+5
6
8
10
Description
Clamping lever ( 25 ... 63)
Seal-/cover strip
O-ring
Seal
Seal
Wiper
Grease
Quantity
2
1
2
2
2
1
1
Desmription
Quantity
Seal strip
Item 2
M/P 40262/*
M/P 40262/*
M/P 40262/*
M/P 40344/*
M/P 40263/*
M/P 40626/*
M/P 40626/*
M/P 40715/*
Cover strip
Item 3
M/P 74223/*
M/P 74223/*
M/P 74131/*
M/P73936/*
M/P73945/*
M/P73946/*
M/P73946/*
M/P 74232/*
16
20
25
32
40
50
63
80
Type
M/146116..../M
M/146120..../M
M/146125..../M
M/146132..../M
M/146140..../M
M/146150..../M
M/146163..../M.
M/146180..../M
Metric
spares kit
QM/146116/00
QM/146120/00
QM1/46125/00
QM/146132/00
QM/146140/00
QM/146150/00
QM/146163/00
QM/146180/00
Comprising
Item
1
2+3
4+5
6
7
8
9
10
2
1
2
2
4
2
2
1
1
Seal strip
Item 2
M/P 40270/*
M/P 40262/*
M/P 40262/*
M/P 40344/*
M/P 40263/*
M/P 40626/*
M/P 40626/*
M/P 40715/*
ACT-126
Mover strip
Item 3
M/P 74216/*
M/P 74223/*
M/P 74131/*
M/P73936/*
M/P73945/*
M/P73946/*
M/P 73946/*
M/P 74232/*
2
2
2
2
1
Type
C/146.25/..
25
1.10
(28)
1.36
(34.5)
1.71
(43.5)
2.09
(53)
2.34
(59.5)
C/146.32/..
32
C/146.40/..
40
C/146.50/..
50
C/146.63/..
63
1. Pressurrize port
2. Pressurize port
2
1
Cushion screw
Moving direction
ACT-127
ACTUATORS
ACTUATORS
Standard models
New compact. space-saving
design
Proven sealing system
Integral switch mounting
Buffer or adjustable cushioning
Standard foot mountings
Technical data
Medium:
Compressed air. filtered.
lubricated or non-lubricated
Operation:
Double acting. buffer or
adjustable cushioning. magnetic
or non-magnetic piston
Operating pressure:
15 to 116 psig
Operating temperature:
-22F to +180F max.
Consult our Technical Service for
use below +35F
Strokes:
Made to order
maximum 236 inches
Materials
Barrel: anodised aluminum alloy
End covers: zinc plated
steel/aluminum
Yoke: anodized aluminum alloy
Pistons: plastic
Cover: plastic
Sealing strip: polyurethane
Cover strip: polyamide
Seals: nitrile rubber &
polyurethane
ACT-128
25
32
40
Non-magnetic
Buffer cushioning
A44025AAAAN*
A44032AAAAN*
A44040AAAAN*
Adjustable cushioning
A44025AACAN*
A44032AACAN*
A44040AACAN*
Magnetic
Buffer cushioning
A44025AABAN*
A44032AABAN*
A44040AABAN*
Adjustable cushioning
A44025AADAN*
A44032AADAN*
A44040AADAN*
Options selector
A440VVAAVAVVVVV
Fractional Increments of Stroke in Inch
A=0
E = 1/4
J = 1/2
P = 3/4
B = 1/16
F = 5/16
K = 9/16
R = 13/16
C = 1/8
G = 3/8
M = 5/8
S = 7/8
D = 3/16
H = 7/16
N =11/16 T = 15/16
X = Special
Specify
A
N
1"
1-1/4"
1-1/2"
Mountings
25
32
40
Q44025AAAAAM337
Q44032AAAAAM337
Q44040AAAAAM337
Q44025AAAAAM332
Q44032AAAAAM332
Q44040AAAAAM332
A44000
Double acting
25 ... 40 mm
Standard cylinders
A44000
B
A
B
A-B
stroke
H
2 x A + stroke
25
3.03
(77)
3.66
(93)
4.63
(117.5)
3.94
(100)
4.72
(120)
6.50
(165)
0.47
(12)
0.71
(18)
0.71
(18)
0.49
(12.5)
0.59
(15)
0.79
(20)
0.20
(05)
0.28
(07)
0.28
(07)
0.47 M5 1.57
(12)
(40)
0.59 M6 1.97
(15)
(50)
0.67 M6 2.36
(17)
(60)
32
40
R (port
S T
1.42
(36)
1.89
(48)
2.13
(54)
0.71
(18)
1.02
(26)
1.18
(30)
0.28
(07)
0.35
(09)
0.35
(09)
0.71
(18)
0.79
(20)
0.79
(20)
1.57
(40)
1.95
(49.5)
2.24
(57)
0.10
(2.5)
0.10
(2.5)
0.14
(3.5)
1.10
(28)
1.26
(32)
1.42
(36)
0.87
(22)
0.94
(24)
0.94
(24)
NPT 1/8"
G1/8
NPT 1/8"
G1/8
NPT 1/4"
G1/4
Swinging bridge S
Q44000AAAAAM337
Center support V
Q44000AAAAAM332
Fx
BA
BB
AD (A/F)
BF
BJ
BC
BE
BG
BH
AJ
AH
AK
AL
BD
AE
AB
AC
AF
AG
*Adjustable
mm
25
32
40
BA
1.57
(40)
1.97
(50)
2.36
(60)
BB
BD
BE
(DIN74)
1.57 1.10 BM6
.315
(40) (28)
( 8)
2.17 1.57 BM6
.315
(55) (40)
( 8)
2.17 1.57 BM6
.315
(55) (40)
( 8)
BC
BF
BG
BH
BJ
1.14
(29)
1.22
(31)
1.22
(31)
1.10
(28)
1.18
(30)
1.18
(30)
2.70 +0.2 -0
(68.5 +5 -0)
3.44 +0.2 -0
(87.5 +5 -0)
3.92 +0.2 -0
(99.5 +5 -0)
0.08
(2)
0.08
(2)
0.08
(2)
Weight
lbs (kg)
0.33
(0.15)
0.44
(0.20)
0.55
(0.25)
mm
25
32
40
AB
AC
0.98
(25)
1.18
(30)
1.57
(40)
1.57
(40)
1.97
(50)
2.36
(60)
AD
(A/F)
0.39
(10)
0.39
(10)
0.39
(10)
AE AF
AG
AH
AJ
AK
0.26
(6.6)
0.35
(9)
0.35
(9)
2.76
(70)
3.27
(83)
3.62
(92)
0.85
(21.5)
1.12
(28.5)
1.37
(35)
0.12
(3)
0.12
(3)
0.12
(3)
1.22
(31)
1.69
(43)
2.17
(55)
2.28
(58)
2.76
(70)
3.11
(79)
AL
Weight
lbs (kg)
2.11 0.15
(53.5) (0.07)
2.76 0.33
(70) (0.15)
3.21 0.55
(81.5) (0.25)
ACT-129
ACTUATORS
ACTUATORS
The LINTRA-LITE rodless cylinder is a cost effective solution for application where
light loading is required or where external guiding will be used to support the load.
Extrusion has
integral slots for
position sensing
switches
Integral foot
mount end
covers are zinc
plated steel
Optional cushion
adjusting screws
in both end caps
ACT-130
Anodized, corrosion
resistant extruded aluminum
tube
A44000
Double acting
25 ... 40 mm
Features
Extruded for
selfforming screws
Cylinder Deflection
Deflection due to cylinder weight.
External Load
Deflection
f f2
2 (mm)
(mm) inch
(2000)
2000
450
(1000)
1000
225
(500)
500
112.5
(1)
.039
1
(200)
200
45
(0.6)
(0.4)
0,6
.024
.016
0,4
(100)
100
22.5
(50)
11.25
(0.1)
.004
0,1
Deflection f1 =
.039
(1mm)
f1=
1 mm
(2)
2
.079
32
40
F (N)
Lbs.
25
Force
(N)
40
50
32
(10)
(1)
39
1000
(1000)
79
2000
25
10
2.25
.2251
0
1000 591500
39
792000
98
(4000)
11/2"
(40mm)
11/4"
(32mm)
1"
(25mm)
4000197
5000
236 inches6000
(5000) Supported
(6000) (mm)
length (mm)
Cylinder 1-1/4" (32mm), stroke length 138" (3500mm), external load 45 lbs. (200 N).
Maximum distance between supports = 59 inches (1500mm) (see diagram). Therefore
additional support is required.
98
118
3000
2500
157
4000
(4000)
197
5000
236 inches
6000
(5000)
(6000) (mm)
Supported
length (mm)
Supported
length
Cylinder 40mm, external force 25 lbs. force (120 N), distance between
supports 98 inches (2500mm).
Required: Total deflection
1.Deflection due to external force (f1): See diagram
.039"/20.23 lbs. (1mm/90 N) x 25 lbs. (120 N)
2.Deflection due to cylinder weight (f2): See diagram
Total deflection:
.051" (1.3mm)
+.024" (0.6mm)
.075" (1.9mm)
ACT-131
ACTUATORS
Materials of Construction
Barrel: Anodized aluminum alloy
End covers: Zinc plated steel/aluminum
Yoke: Anodized aluminum alloy
Cover and Pistons: Plastic
Sealing strip: Polyurethane
Cover strip: Polyamide
Seals: Nitrile rubber and polyurethane
Operating Pressure:
15 to 116 psig (1 to 8 bar)
Bore Sizes:
1" = 0.984" ( 25mm)
1-1/4" = 1.260" ( 32mm)
1-1/2" = 1.575" ( 40mm)
Stroke Lengths:
236 inches (6000mm) max.
Supply:
Compressed air, filtered to
50-microns and lubricated.
Cushion Lengths:
1" = 0.709"( 25mm = 18mm)
1-1/4" = 0.906"
( 32mm = 23mm)
1-1/2" = 1.378"
( 40mm = 35mm)
Mx
lbs.
100
200
50
Fy
My
40mm
Force
ACTUATORS
Operating Specifications
Operating Temperature:
-22 to 180F* (-30C to 80C)
32mm
100
25mm
Mz
0
0
0
0
25
50
2
100
75
4
116
psig
(bar)
Pressure
Theoretical forces
at 6 bar
lbs
(N)
56
(250)
92
(410)
143
(640)
Air consumption
per stroke at 6 bar
cu.ft./in. (l/cm)
0.03
(0.035)
0.04
(0.056)
0.06
(0.088)
Cushion length
Inch
.709
.906
1.378
(mm)
(18)
(23)
(35)
Loading values
Fy
lbs
(N)
20
(90)
27
(120)
54
(240)
Fz
lbs
63
83
162
(N)
(280)
(370)
(720)
Mx
in/lbs
9
18
36
(Nm)
(1)
(2)
(4)
My
in/lbs
115
186
496
(Nm)
(13)
(21)
(56)
Loading values applicable to a speed of 66 ft/s ( 0.2 m/s). Maximum working life is normally reached below a speed of 3.3 ft/s (1 m/s).
ACT-132
Mz
in/lbs
35
53
142
(Nm)
(4)
(6)
(16)
13
12
37
A44000
Double acting
25 ... 40 mm
37
15
13
12
Replacement Parts for A44000AAVAN with NPT Port Thread and Stroke in inches
Cylinder
1"
11/4"
11/2"
Model
A44025AAVAN
A44032AAVAN
A44040AAVAN
V Variants
A, B, C or D
Q44025AACANT788*
Q44032AACANT788*
Q44040AACANT788*
* Insert stroke length
in inches.
Item
Description
Quantity
3
8/9
12/15
13/14
37
Bumper
Seal/cover strip
Piston/cushion seal
O-Ring
Cover
Grease
2
1/1
2/2
2/2
1
2
Seal strip
Item 8
C/P41628/*
C/P41629/*
C/P41630/*
Cover strip
Item 9
C/P41631/*
C/P41632/*
C/P41633/*
Tube
Item 4
C/P41607/*
C/P41613/*
C/P41602/*
NOTE: Spares kits are common for all cylinder variants. Please specify the cylinder model number when ordering spare parts.
Replacement Parts for A44000AAVAA with ISO-G Port Thread and Stroke in mm
Cylinder
25mm
32mm
40mm
Model
A44025AAVAA
A44032AAVAA
A44040AAVAA
V Variants
A, B, C or D
Q44025AACAAT788*
Q44032AACAAT788*
Q44040AACAAT788*
* Insert stroke length
in mm.
Item
Description
3
8/9
12/15
13/14
37
Bumper
Seal/cover strip
Piston/cushion seal
O-Ring
Cover
Grease
Quantity
2
1/1
2/2
2/2
1
2
Seal strip
Item 8
M/P41628/*
M/P41629/*
M/P41630/*
Cover strip
Item 9
M/P41631/*
M/P41632/*
M/P41633/*
Tube
Item 4
M/P41607/*
M/P41613/*
M/P41602/*
NOTE: Spares kits are common for all cylinder variants. Please specify the cylinder model number when ordering spare parts.
Torx Screw 1
(4 required)
Torx Screws
Tube Torque Torx Screw 1 (4)
Cylinder
1" (25mm)
11/4" (32mm)
11/2" (40mm)
Screw Size
M4x16
M5x20
M6x25
Torque
3-3.5 Nm
6-7 Nm
9-10 Nm
Tool Size
T-20
T-25
T-30
Screw Size
M3x8
M3x8
M4x10
Torque
.8-1 Nm
.8-1 Nm
3-3.5 Nm
Tool Size
T-10
T-10
T-20
Torx Screw 2
(1 required)
ACT-133
ACTUATORS
Spares
ACTUATORS
Roundline Plus
Stainless Steel Body Actuators
5/16" to 3" bore
Single and Double acting actuators
Full range of bore sizes
All essential models
Optional Ecology seal
Technical data
Medium:
Filtered, lubricated or nonlubricated, compressed air
Maximum Operating
Pressure:
250 psig (17.2 bar)
Temperature Range*:
Standard Nitrile Seals:
-20 to 200F (-29 to 93C)
Viton/High temp Seals:
-20 to 400F (-29 to 205C)
*With dew point of supply air less than air
temperature below 35F (2C)
Lubrication:
All Roundline Plus cylinders are
pre-lubricated during assembly
with a Teflon based grease for
non-lube service and long life.
Materials
Cylinder Body:
304 Stainless Steel
Head and Cap:
Aluminum Alloy
Piston Rod:
Stainless steel in double rod
cylinders, and 5/16", 7/16", and
9/16" bores. Chrome plated
steel in all other bore sizes
Rod Bearing: Oil Impregnated
Sintered Bronze
Piston: Aluminum Alloy or
stainless steel
Rod & Piston Seals: Nitrile
Pivot Bracket, Rod Clevis, Foot
Bracket, Mounting Nut: Bright Zinc
Plated Carbon Steel
ACT-134
Options selector
RP 075 x 2.50 - DAN - PS
Series
Roundline Plus
Roundline Plus with
Ecology seals*
RP
*ERP
Bore Size
5/16"
031
7/16"
043
9/16"
056
3/4" (E)
075
7/8"
087
1-1/16" (E)
106
1-1/4" (E)
125
1-1/2" (E)
150
1-3/4"
175
2" (E)
200
2-1/2" (E)
250
3" (E)
300
E - Available with Ecology Seals
Stroke
Increments of 1/16" up to
a maximum. See table
Mounting Options
Single Acting Nose
SAN
Single Acting Pivot
SAP
Single Acting Front Block
SBF
Single Acting Rear Block
SBR
Single Acting Front Trunnion
STF
Single Acting Rear Trunnion
STR
Single Acting Non-Rotating Nose
NRN
Single Acting Non-Rotating Pivot
NRP
Reverse Acting Nose
RAN
Reverse Acting Pivot
RAP
Reverse Acting Front Block
RAF
(available in 3/4", 1-1/16" & 1-1/2 only)
Reverse Acting Rear Block
RAR
Double Acting Nose
DAN
Double Acting Pivot
DAP
Double Acting Double End Mount
DAD
Double Acting Front Block
DAF
Double Acting Rear Block
DAR
Double Acting Front Trunnion
DFT
Double Acting Rear Trunnion
DRT
Double Acting Double Rod End
DRD
Mounting Options
Adjustable Cushion Head End
Adjustable Cushion Cap End
Adjustable Cushion Both Ends
Bumpers
Alternate Port Location
Side Ported End Cap (DAN, SAN, and
DAFmodels only, note length adder)
Magnetic Piston
Switch Rail and location
Non-Adjustable cushion head end
Non-Adjustable cushion cap end
Non-Adjustable cushions both ends
No Flats (no plain rod stick out)
No Rod Thread
No Pin
Pivot Bushing (no pin)
Non-Standard Male Thread
Non-Standard Female Thread
Thread extension over standard
(specify additional length)
Rod extension over standard
(specify additional length)
Stainless Steel piston rod
(standard on certain models)
Viton/High Temperature Seals
Rod Wiper (not available with HT)
CH
CC
CB
UB
PL(__)
PC
PS
M1,M2,
M3,M4
NH*
NC*
NB*
NF**
PR
NP
PO
TM(__)
FT(__)
TX(__)
RX(__)
SS
HT
RW
* ERP, ecology cylinders come complete with nonadjustable cushions both ends (NH, NC, NB, options not
required in model number of ERP cylinder). ERP on DAP,
DAF, DAD, and DAN models only (add PC option length
adder to DAN models)
** Available only on 1-1/16" bore - RAN and RAP, mounts.
Male thread extension only. Consult factory for negative
thread or rod extensions.
Available on 075, 106, 150, 200, 250 & 300 Bores.
6
4
2
4
2
1
3/4
36.6
5.6
2.5
1.4
0.9
0.6
0.5
0.3
0.3
0.2
1-1/16
62.3
15.6
6.9
3.9
2.5
1.7
1.3
1.0
0.8
0.6
Cylinder Bore
1-1/4
74.5
18.6
8.3
4.7
3.0
2.1
1.5
1.2
0.9
0.7
1-1/2
115.5
28.9
12.8
7.2
4.6
3.2
2.4
1.8
1.4
1.2
2
258.9
64.7
28.8
16.2
10.4
7.2
5.3
4.0
3.2
2.6
2-1/2
421.1
105.3
46.8
26.3
16.8
11.7
8.6
6.6
5.2
4.2
PSI
0
20
40
60
80
100
2-1/2
.17
.12
.08
.05
.02
0
The figure above represents total stroke loss (both ends) for the pressure
indicated for new cylinders. The impact dampening seals will take some
compression set during operation of the cylinder and the stroke loss will
decrease. To determine stroke loss for either head or cap divide the value
shown by 2.
ACT-135
ACTUATORS
ACTUATORS
Code
Air Reservoir
Force Factor (Area)
Extend
Retract
0.077
0.064
0.15
0.12
0.25
0.22
0.44
0.39
0.6
0.55
0.89
0.81
1.23
1.08
1.77
1.62
2.41
2.21
3.14
2.84
4.91
4.61
7.07
6.63
5/16"
(031)
7/16"
(043)
9/16"
(056)
3/4"
(075)
7/8"
(087)
1-1/16"
(106)
1-1/4"
(125)
1-1/2"
(150)
1-3/4"
(175)
2"
(200)
2-1/2"
(250)
3"
(300)
Force Output Formula
Cylinder Output Force = Force Factor (area) x Air Line Pressure (psi)
Ex: 1-1/16 bore cylinder operating at 80 psi:
Force exerted on the extend: 0.89 x 80 = 71.2 lbs.
Force exerted on the retract: 0.81 x 80 = 55.2 lbs.
Air Reservoirs are made of the same high-quality stainless steel as the
Series RP Cylinders.
LB PLUS LENGTH
K
Code
(031)
(043)
(056)
(075)
(087)
(106)
(125)
(150)
(175)
(200)
Relaxed (lbs)
0.5
1
2
3
3
3
7.5
7
11
15
Compressed (lbs)
1
2
4
6
6
6
15
14
24
30
EE NPT
(Both Ends)
EE
LB
0.813
1.125
1.562
2.080
2.610
1/8"
1/8"
1/8"
1/4"
1/4"
0.625
0.875
0.875
1.250
1.750
0.187
0.187
0.250
0.312
0.312
1.938
2.375
2.250
2.875
2.875
Standard Internal
Lengths
1" increments thru 4"
1" increments thru 8"
1" increments thru 16"
1" increments thru 16"
1" increments thru 24"
How to Order
Example:
1-1/16" bore air reservoir with a 3" internal length would be ordered as
follows: AR-1-1/16 x 3
ACT-136
Bore
5/16"
7/16"
9/16"
3/4"
7/8"
1-1/16"
1-1/4"
1-1/2"
1-3/4"
2"
2-1/2"
3"
Length Increase
0.2
0.19
0.03
0.44
0.28
0.25
0.31
0.19
0.56
0.38
0.38
0.44
PS - Magnetic Piston
A magnet on the piston may increase the length of
the cylinder. See chart below for length adders.
Increase in cylinder length with the PS option
Single &
Double
Double
Reverse Acting
Acting
Rod End
5/16"
0.150
0.150
N/A
7/16"
0.200
0.250
0.250
9/16"
0.125
0
0
3/4"
0.125
0
0
7/8"
0.125
0.125
0.125
1-1/16"
0.125
0
0.125**
1-1/4"
0.125
0
0
1-1/2"
0.125
0
0
1-3/4"
0.125
0
0
2"
0.125
0
0
2-1/2"
0
0
3"
0
0
* When the UB and PS options are in combination on an 1-1/16" bore,
double rod end, only the bumper length should be added. All other
models and bore sizes should add the UB length and the PS length
together.
** Ecology piston seal adds .375" to the overall length when combined
with PS option on the 1-1/16" bore DRD model only.
Bore
Rail shown at
position M2
1
PL(__) - Alternate Port Location
Designate location on head and cap
respectively. For example: L(12) =
Head port location 1, and Cap port
location 2.
ACT-137
ACTUATORS
ACTUATORS
EE Port
RM Pilot
MM Dia.
Rod
Piston
D Across
Wrench
Flats
E1 Dia.
N1 Mounting Nut
Bore
5/16"
7/16"
9/16"
3/4"
7/8"
1-1/16"
1-1/4"
1-1/2"
1-3/4"
2"
2-1/2"
3"
A
0.38
0.50
0.50
0.50
0.50
0.50
0.75
0.75
0.88
0.88
0.88
1.25
C
N/A
N/A
N/A
N/A
N/A
N/A
0.25
0.25
0.31
0.38
0.38
0.38
D
N/A
N/A
N/A
N/A
N/A
N/A
0.38
0.38
0.44
0.50
0.50
0.63
EE
10-32
10-32
10-32
1/8 NPT
1/8 NPT
1/8 NPT
1/8 NPT
1/8 NPT
1/4 NPT
1/4 NPT
1/4 NPT
3/8 NPT
E1
0.61
0.74
0.62
0.86
0.94
1.12
1.34
1.56
1.84
2.08
2.59
3.12
E2
0.36
0.50
0.62
0.81
0.94
1.12
1.34
1.56
1.84
2.08
2.59
3.12
G
0.31
0.38
0.38
0.50
0.50
0.50
0.63
0.63
0.75
0.81
0.81
1.00
J
0.36
0.38
0.50
0.62
0.62
0.88
0.88
0.88
1.25
1.25
1.75
2.00
EE Port
E2 Dia.
K
N/A
0.19
0.19
0.19
0.19
0.19
0.25
0.25
0.25
0.31
0.31
0.31
KK
5-40
10-32
10-32
1/4-28
1/4-28
5/16-24
7/16-20
7/16-20
1/2-20
1/2-20
1/2-20
5/8-18
LB
1.64
2.12
2.28
2.97
2.94
3.12
4.00
3.69
4.69
4.69
4.69
5.25
MM
0.125
0.187
0.187
0.250
0.250
0.312
0.437
0.437
0.500
0.625
0.625
0.750
N1
3/8-24
7/16-20
7/16-20
5/8-18
5/8-18
5/8-18
3/4-16
3/4-16
1-14
1-1/4-12
1-3/8-12
1-1/2-12
RM
.371/.373
.434/.437
.434/.437
.621/.624
.621/.624
.621/.624
.746/.749
.746/.749
1.029/1.032
1.372/1.375
1.497/1.500
1.622/1.625
Y
0.47
0.72
0.75
0.97
0.97
1.06
1.37
1.25
1.63
1.46
1.46
1.71
V
0.03
0.05
0.06
0.09
0.09
0.09
0.09
0.09
0.09
0.12
0.12
0.19
1-1/16 bore with SS or PS option, C = 0.12 and D = 0.25. To remove the flats and plain rod stick out, specify NF in the model number.
A
C
LB + STROKE
E
FL
EE Port
CB
MM Dia.
Piston
Rod
D Across
Wrench
Flats
Bore
A
C
5/16"* 0.38 N/A
7/16" 0.50 N/A
9/16"* 0.50 N/A
3/4"
0.50 N/A
7/8"
0.50 N/A
1-1/16" 0.50 0.12
1-1/4" 0.75 0.25
1-1/2" 0.75 0.25
1-3/4" 0.88 0.31
2"*
0.88 0.38
2-1/2"* 0.88 0.38
3"*
1.25 0.38
* Pivot bushing included
CB
0.25
0.31
0.31
0.38
0.38
0.38
0.50
0.62
0.62
0.75
0.75
0.88
ACT-138
RM Pilot
N1 Mounting Threads
XD + STROKE
CD
0.125
0.156
0.156
0.250
0.250
0.250
0.250
0.375
0.376
0.375
0.375
0.500
D
N/A
N/A
N/A
N/A
N/A
0.25
0.38
0.38
0.44
0.50
0.50
0.63
E
0.61
0.74
0.62
0.86
0.94
1.12
1.34
1.56
1.84
2.08
2.59
3.12
EE
10-32
10-32
10-32
1/8 NPT
1/8 NPT
1/8 NPT
1/8 NPT
1/8 NPT
1/4 NPT
1/4 NPT
1/4 NPT
3/8 NPT
FL
0.34
0.44
0.38
0.62
0.62
0.62
0.78
0.81
1.12
1.03
1.03
1.34
G
0.31
0.38
0.38
0.50
0.50
0.50
0.63
0.63
0.75
0.81
0.81
1.00
CD Dia.
PIN
LH
N2 Mounting Threads
KK
5-40
10-32
10-32
1/4-28
1/4-28
5/16-24
7/16-20
7/16-20
1/2-20
1/2-20
1/2-20
5/8-18
L
0.19
0.25
0.25
0.34
0.34
0.34
0.41
0.50
0.50
0.56
0.56
0.81
LB
2.19
2.81
2.75
4.03
3.84
4.12
5.12
4.75
6.25
6.06
6.06
7.12
LH
0.39
0.50
0.50
0.75
0.75
0.75
0.88
1.00
1.00
1.63
1.63
1.90
MM
0.125
0.187
0.187
0.250
0.250
0.312
0.437
0.437
0.500
0.625
0.625
0.750
N1
3/8-24
7/16-20
7/16-20
5/8-18
5/8-18
5/8-18
3/4-16
3/4-16
1-14
1-1/4-12
1-3/8-12
1-1/2-12
N2
3/8-24
7/16-20
7/16-20
5/8-18
5/8-18
5/8-18
3/4-16
3/4-16
1-14
1-1/4-12
1-3/8-12
1-1/2-12
RM
.371/.373
.434/.437
.434/.437
.621/.624
.621/.624
.621/.624
.746/.749
.746/.749
1.029/1.032
1.372/1.375
1.497/1.500
1.622/1.625
V
0.03
0.05
0.06
0.09
0.09
0.09
0.09
0.09
0.09
0.12
0.12
0.19
XD
2.03
2.56
2.56
3.75
3.56
3.84
4.72
4.38
5.75
5.62
5.62
6.50
Y
0.47
0.72
0.75
0.97
0.97
1.07
1.37
1.25
1.63
1.54
1.47
1.71
Dimensions in inches
KK Piston
Rod
Threads
Y2
Y1
E Dia.
EE Port
MM Dia.
Piston
Rod
D Across
Wrench
Flats
Bore
5/16"*
7/16"
9/16"*
3/4"
7/8"
1-1/16"
1-1/4"
1-1/2"
1-3/4"
2"*
2-1/2"*
3"*
A
0.38
0.50
0.50
0.50
0.50
0.50
0.75
0.75
0.88
0.88
0.88
1.25
C
N/A
N/A
N/A
N/A
N/A
0.12
0.25
0.25
0.31
0.38
0.38
0.38
D
N/A
N/A
N/A
N/A
N/A
0.25
0.38
0.38
0.44
0.50
0.50
0.63
E
0.61
0.74
0.62
0.86
0.94
1.12
1.34
1.56
1.84
2.08
2.59
3.12
EE
10-32
10-32
10-32
1/8 NPT
1/8 NPT
1/8 NPT
1/8 NPT
1/8 NPT
1/4 NPT
1/4 NPT
1/4 NPT
3/8 NPT
RM Pilot
N1 Mounting Nut
G
0.31
0.38
0.38
0.50
0.50
0.50
0.63
0.63
0.75
0.81
0.81
1.00
K
0.35
0.50
0.44
0.62
0.62
0.62
0.81
0.88
1.00
1.00
1.00
1.43
KK
5-40
10-32
10-32
1/4-28
1/4-28
5/16-24
7/16-20
7/16-20
1/2-20
1/2-20
1/2-20
5/8-18
LB
2.19
2.81
2.75
4.03
3.84
4.12
5.12
4.75
6.25
6.06
6.06
7.12
MM
0.125
0.187
0.187
0.250
0.250
0.312
0.437
0.437
0.500
0.625
0.625
0.750
N1
3/8-24
7/16-20
7/16-20
5/8-18
5/8-18
5/8-18
3/4-16
3/4-16
1-14
1-1/4-12
1-3/8-12
1-1/2-12
RM
.371/.373
.434/.437
.434/.437
.621/.624
.621/.624
.621/.624
.746/.749
.746/.749
1.029/1.032
1.372/1.375
1.497/1.500
1.622/1.625
V
0.03
0.05
0.06
0.09
0.09
0.09
0.09
0.09
0.09
0.12
0.12
0.19
Y1
0.47
0.73
0.75
0.97
0.97
1.07
1.37
1.25
1.63
1.46
1.46
1.71
Y2
0.50
0.69
0.57
0.90
0.90
0.90
1.18
1.18
1.62
1.47
1.47
1.96
5/16" BORE
ONLY #10-32 port
(Opposite
0.41
Side)
.34
E1
SQ
KK Piston
Rod
Threads
RM
Pilot
LB + STROKE
K
DB Thds
C'Bore for SB Socket
Head Cap Screw
(2)
C
V
DN
RT Threads
BC Bolt Circle
(2)
BC
N/A
0.75
1.00
1.25
1.75
C
N/A
N/A
0.25
0.38
0.25
D
N/A
N/A
0.22
0.25
0.38
DB
N/A
8-32
1/4-20
1/4-20
5-16-18
7/16" BORE
ONLY
.44
D Across
Wrench
Flats
A
0.38
0.50
0.75
0.75
1.25
E2
(2)
MM Dia.
Piston
Rod
Bore
5/16"
7/16"
3/4"
1-1/16"
1-1/2"
0.59
DN
N/A
N/A
0.62
0.81
1.12
EE
10-32
10-32
1/8 NPT
1/8 NPT
1/4 NPT
E1
0.50
0.75
1.00
1.25
1.75
.44
EE PORT
.31
EE PORT
E2
0.36
0.50
0.81
1.12
1.56
H
N/A
N/A
0.38
0.62
0.88
J
N/A
0.38
0.62
0.88
0.88
K
N/A
0.19
0.19
0.19
0.25
KK
5-40
10-32
1/4-28
5/16-24
7/16-20
LB
1.72
2.12
3.22
3.75
4.19
MM
0.125
0.187
0.250
0.312
0.437
RM
N/A
0.437
0.625
0.75
1.00
RT
N/A
8-32
10-32
10-32
1/4-20
SB
N/A
N/A
#10
#10
1/4
V
N/A
0.06
0.09
0.09
0.13
#10-32 port
(Opposite
Side)
Y
N/A
N/A
0.50
0.54
0.65
ACT-139
ACTUATORS
ACTUATORS
A
C
LB + Stroke
Y1
E2
SQ
Y2
EE Port
MM Dia.
Piston
Rod
D Across
Wrench
Flats
Bore
7/16"
3/4"
1-1/16"
1-1/2"
A
0.50
0.75
0.75
1.25
C
N/A
0.25
0.38
0.25
D
N/A
0.22
0.25
0.38
E1
0.75
0.86
1.12
1.56
RM Pilot
E1 Dia.
N1 Nose Threads
E2
0.75
1.00
1.25
1.75
EE
10-32
1/8 NPT
1/8 NPT
1/4 NPT
G
0.38
0.50
0.50
0.63
KK
10-32
1/4-28
5/16-24
7/16-20
RT Threads
BC Bolt Circle
(2)
LB
2.44
3.78
4.00
4.38
MM
0.187
0.250
0.312
0.437
N1
7/16-20
5/8-18
5/8-18
3/4-16
RM
.433/.437
.621/.624
.621/.624
.746/.749
RT
8-32
10-32
10-32
1/4-20
BC
0.75
1.00
1.25
1.75
V
0.05
0.09
0.09
0.09
Y1
0.72
0.97
1.06
1.25
Y2
0.34
0.44
1.25
0.62
TW
RM
A
0.50
0.75
0.75
1.25
C
N/A
0.25
0.38
0.25
TD
D
N/A
0.22
0.25
0.38
TP
D Across
Wrench
Flats
E1
0.75
1.00
1.25
1.75
E2
0.50
0.81
1.12
1.56
E2
MM Dia.
Piston
Rod
TH
Bore
7/16"
3/4"
1-1/16"
1-1/2"
LB + Stroke
KK Piston A
Rod
C
Threads
E1
SQ
EE Port
EE
10-32
1/8 NPT
1/8 NPT
1/4 NPT
J
0.38
0.62
0.88
0.88
TL
K
0.19
0.19
0.19
0.25
KK
10-32
1/4-28
5/16-24
7/16-20
LB
2.12
3.22
3.75
4.19
MM
0.187
0.250
0.312
0.437
EE Port
RM
0.44
0.62
0.75
1.00
TD
0.374
0.500
0.500
0.500
TH
0.25
0.38
0.38
0.38
TL
0.31
0.69
1.09
1.19
TP
0.41
0.53
0.53
0.59
TW
1.25
1.75
2.00
2.50
V
0.06
0.09
0.09
0.12
KK Piston
Rod
Threads
A
C
C
N/A
0.25
0.38
0.25
D
N/A
0.22
0.25
0.38
ACT-140
E1
0.75
0.86
1.12
1.56
TL
TW
D Across
Wrench
Flats
A
0.50
0.75
0.75
1.25
TA
E2
SQ
TD
EE Port
MM Dia.
Piston
Rod
Bore
7/16"
3/4"
1-1/16"
1-1/2"
LB + Stroke
Y1
E2
0.75
1.00
1.25
1.75
E1 Dia.
N1 Nose Threads
EE
10-32
1/8 NPT
1/8 NPT
1/4 NPT
G
0.38
0.50
0.50
0.63
KK
10-32
1/4-28
5/16-24
7/16-20
RM Pilot
LB
2.44
3.78
4.00
4.38
MM
0.187
0.250
0.312
0.437
TH
N1
7/16-20
5/8-18
5/8-18
3/4-16
RM
.433/.437
.621/.624
.621/.624
.746/.749
TA
0.09
0.06
0.06
0.12
TD
0.374
0.500
0.500
0.500
TH
0.25
0.38
0.38
0.38
TL
0.25
0.38
0.38
0.50
TW
1.25
1.75
2.00
2.50
V
0.05
0.09
0.07
0.09
Y1
0.72
0.97
1.06
1.25
Dimensions in inches
KK Piston
Rod
Threads
E. Dia.
C
V
EE Port
MM Dia.
Piston
Rod
D Across
Wrench
Flats
Bore
7/16"
9/16"
3/4"
7/8"
1-1/16"
1-1/4"
1-1/2"
1-3/4"
2"
2-1/2"
3"
A
0.50
0.50
0.50
0.50
0.50
0.75
0.75
0.88
0.88
0.88
1.25
RM Pilot
N1 Mounting Nut
C
N/A
N/A
N/A
N/A
0.12
0.25
0.25
0.31
0.38
0.38
0.38
D
N/A
N/A
N/A
N/A
0.25
0.38
0.38
0.44
0.50
0.50
0.63
E
0.74
0.62
0.86
0.94
1.12
1.34
1.56
1.84
2.08
2.59
3.12
EE
10-32
10-32
1/8 NPT
1/8 NPT
1/8 NPT
1/8 NPT
1/8 NPT
1/4 NPT
1/4 NPT
1/4 NPT
3/8 NPT
G
0.38
0.38
0.50
0.50
0.50
0.63
0.63
0.75
0.81
0.81
1.00
KK
10-32
10-32
1/4-28
1/4-28
5/16-24
7/16-20
7/16-20
1/2-20
1/2-20
1/2-20
5/8-18
MM
0.187
0.187
0.250
0.250
0.312
0.437
0.437
0.500
0.625
0.625
0.750
N1
7/16-20
7/16-20
5/8-18
5/8-18
5/8-18
3/4-16
3/4-16
1-14
1-1/4-12
1-3/8-12
1-1/2-12
RM
.434/.437
.434/.437
.621/.624
.621/.624
.621/.624
.746/.749
.746/.749
1.029/1.032
1.372/1.375
1.497/1.500
1.622/1.625
V
0.05
0.06
0.09
0.09
0.09
0.09
0.09
0.09
0.12
0.12
0.19
Y
0.72
0.75
0.97
0.97
1.06
1.37
1.25
1.94
1.46
1.46
1.71
ZM
2.81
2.94
4.00
3.91
4.00
5.56
5.12
6.56
6.56
6.56
7.31
TOTAL LENGTH
A
C
G
V
RM Pilot
N1 Mounting Nut
EE Port
Bore
A
C
D
E
EE
G
J
K
KK
MM
N1
RM
5/16" 0.38
N/A
N/A
0.36
10-32
0.25
N/A
N/A
5-40
0.125
1/4-28
.309/.312
7/16" 0.50
N/A
N/A
0.50
10-32
0.31
0.38
0.19
10-32
0.187
3/8-24
.369/.373
9/16" 0.50
N/A
N/A
0.62
10-32
0.38
0.50
0.19
10-32
0.187
7/16-20
.434/.437
3/4"
0.50
N/A
N/A
0.81
1/8 NPT 0.44
0.62
0.19
1/4-28
0.250
1/2-20
.494/.498
7/8"
0.50
N/A
N/A
0.94
1/8 NPT 0.50
0.62
0.19
1/4-28
0.250
5/8-18
.621/.624
1-1/16" 0.50
N/A
N/A
1.12
1/8 NPT 0.50
0.88
0.19
5/16-24
0.312
5/8-18
.621/.624
1-1/4" 0.75
0.25
0.38
1.34
1/8 NPT 0.63
0.88
0.25
7/16-20
0.437
3/4-16
.746/.749
1-1/2" 0.75
0.25
0.38
1.56
1/8 NPT 0.63
0.88
0.25
7/16-20
0.437
3/4-16
.746/.749
1-3/4" 0.88
0.31
0.44
1.84
1/4 NPT 0.75
1.25
0.25
1/2-20
0.500
1-14
1.029/1.032
2"
0.88
0.38
0.50
2.08
1/4 NPT 0.81
1.25
0.31
1/2-20
0.625
1-1/4-12
1.372/1.375
1-1/16 bore with SS or PS option, C = 0.12 and D = 0.25. To remove the flats and plain rod stick out, specify NF in the model number.
V
0.03
0.05
0.06
0.08
0.09
0.07
0.09
0.09
0.09
0.12
Total Length
1.12 + (0.75 per 1/2" of stroke)
1.31 + (0.94 per 1/2" of stroke)
1.53 + (1.62 per 1" of stroke)
1.50 + (1.69 per 1" of stroke)
1.84 + (1.56 per 1" of stroke)
1.94 + (1.56 per 1" of stroke)
2.66 + (1.81 per 1" of stroke)
2.44 + (1.69 per 1" of stroke)
2.97 + (2.00 per 1" of stroke
Consult Factory
ACT-141
ACTUATORS
ACTUATORS
KK Piston
Rod
Threads
FL
RM Pilot
CB
EE Port
MM Dia.
Piston
Rod
D Across
Wrench
Flats
Bore
5/16*
7/16"
9/16"*
3/4"
7/8"
1-1/16"
1-1/4"
1-1/2"
1-3/4"
2"*
A
0.38
0.50
0.50
0.50
0.50
0.50
0.75
0.75
0.88
0.88
CB
0.25
0.31
0.31
0.38
0.38
0.38
0.50
0.62
0.62
0.75
C
N/A
N/A
N/A
N/A
N/A
0.12
0.25
0.25
0.31
0.38
CD
0.125
0.156
0.156
0.250
0.250
0.250
0.250
0.375
0.375
0.375
D
N/A
N/A
N/A
N/A
N/A
0.25
0.38
0.38
0.44
0.50
E1
0.36
0.50
0.62
0.81
0.94
1.12
1.34
1.56
1.84
2.08
E2
0.36
0.74
0.62
0.86
0.94
1.12
1.34
1.56
1.84
2.08
E1 Dia.
E2 Dia.
N1 Mounting Threads
EE
10-32
10-32
10-32
1/8 NPT
1/8 NPT
1/8 NPT
1/8 NPT
1/8 NPT
1/4 NPT
1/4 NPT
FL
0.34
0.44
0.38
0.62
0.62
0.62
0.78
0.81
1.12
1.03
G
0.25
0.31
0.38
0.44
0.50
0.50
0.63
0.63
1.06
0.81
KK
5-40
10-32
10-32
1/4-28
1/4-28
5/16-24
7/16-20
7/16-20
1/2-20
1/2-20
L
0.19
0.25
0.25
0.34
0.34
0.34
0.41
0.50
0.50
0.56
LH
N/A
0.50
N/A
0.75
0.75
0.75
N/A
N/A
N/A
N/A
CD Dia.
PIN
LH
N2 Mounting
Threads
M
0.16
0.25
0.19
0.28
0.28
0.28
0.40
0.38
0.50
0.44
MM
0.125
0.187
0.187
0.250
0.250
0.312
0.437
0.437
0.500
0.625
N1
1/4-28
3/8-24
7/16-20
1/2-20
5/8-18
5/8-18
3/4-16
3/4-16
1-14
1-1/4-12
N2
3/8-24
7/16-20
7/16-20
5/8-18
5/8-18
5/8-18
3/4-16
3/4-16
1-14
1-1/4-12
V
0.03
0.05
0.06
0.08
0.09
0.07
0.09
0.09
0.09
0.12
RM
.245/.249
.369/.373
.434/.437
.494/.498
.621/.624
.621/.624
.746/.749
.746/.749
1.029/1.032
1.372/1.375
Total Length
1.52 + (.75 per 1/2" of stroke)
1.75 + (.94 per 1/2" of stroke)
1.81 + (1.62 per 1" of stroke)
2.28 + (1.69 per 1" of stroke)
2.47 + (1.56 per 1" of stroke)
2.66 + (1.56 per 1" of stroke)
3.38 + (1.81 per 1" of stroke)
3.12 + (1.69 per 1" of stroke)
4.03 + (2.00 [per 1" of stroke)
Consult Factory
E1
SQ
KK Piston A
Rod
C
Threads
RM
Pilot
DB Thds
C'Bore for SB Sockets
Head Cap Screw
(2)
V
MM Dia.
Piston
Rod
E2
7/16" BORE
ONLY
RT Threads
BC Bolt Circle
(2)
Bore
7/16"
3/4"
1-1/16"
1-1/2"
A
0.50
0.75
0.75
1.25
BC
0.75
1.00
1.25
1.75
C
N/A
0.25
0.38
0.25
D Across
Wrench
Flats
DN
D
N/A
0.22
0.25
0.38
DB
8-32
1/4-20
1/4-20
5/16-18
DN
N/A
0.62
0.81
1.12
E1
0.75
1.00
1.25
1.75
.31
EE Port
E2
0.50
0.81
1.12
1.56
EE
10-32
1/8 NPT
1/8 NPT
1/4 NPT
H
N/A
0.38
0.62
0.88
J
0.38
0.62
0.88
0.88
K
0.19
0.19
0.19
0.25
KK
10-32
1/4-28
5/16-24
7/16-20
MM
0.187
0.250
0.312
0.437
RM
0.44
0.63
0.75
1.00
.44
.44
RT
8-32
10-32
10-32
1/4-20
SB
N/A
#10
#10
1/4
V
0.06
0.09
0.09
0.13
Total Length
1.94 + (.94 per 1/2" of stroke)
2.66 + (1.69 per 1" of stroke)
3.38 + (1.81 per 1" of stroke)
3.69 + (2.00 per 1" of stroke)
RM Pilot
E2
SQ
MM Dia.
Piston
Rod
D Across
Wrench
Flats
E1 Dia.
EE Port
RT Threads
BC Bolt Circle
(2)
N1 Mounting Threads
Bore
7/16"
3/4"
1-1/16"
1-1/2"
A
0.50
0.75
0.75
1.25
BC
0.75
1.00
1.25
1.75
C
N/A
0.25
0.25
0.25
ACT-142
D
N/A
0.22
0.25
0.38
E1
0.50
0.81
1.12
1.56
E2
0.75
1.00
1.25
1.75
EE
10-32
1/8 NPT
1/8 NPT
1/8 NPT
G
0.31
0.44
0.50
0.63
KK
10-32
1/4-28
5/16-24
7/16-20
MM
0.187
0.250
0.312
0.437
N1
3/8-24
1/2-20
5/8-18
3/4-16
RM
.369/.373
.494/.498
.621/.624
.746/.749
RT
8-32
10-32
10-32
1/4-20
V
0.05
0.08
0.07
0.09
Y2
0.34
0.44
0.44
0.62
Total Length
1.62 + (0.94 per 1/2" of stroke)
2.31 + (1.69 per 1" of stroke)
2.81 + (1.81 per 1" of stroke)
3.06 + (2.00 per 1" of stroke)
Dimensions in inches
KK Piston A
Rod
C
Threads
E1
SQ
TW
RM
K
V
MM Dia.
Piston
Rod
D Across
Wrench
Flats
TH
TD
Bore
7/16"
3/4"
1-1/16"
1-1/2"
A
0.50
0.75
0.75
1.25
C
N/A
0.25
0.25
0.25
D
N/A
0.22
0.25
0.38
E1
0.75
1.00
1.25
1.75
E2
EE Port
TL
E2
0.50
0.81
1.12
1.56
EE
10-32
1/8 NPT
1/8 NPT
1/4 NPT
J
0.38
0.62
0.88
0.88
K
0.19
0.19
0.19
0.25
KK
10-32
1/4-28
5/16-24
7/16-20
MM
0.187
0.250
0.312
0.437
RM
0.44
0.62
0.75
1.00
TD
0.37
0.50
0.50
0.50
TH
0.25
0.38
0.38
0.38
TL
0.31
0.69
0.97
1.19
TW
1.25
1.75
2.00
2.50
V
0.05
0.09
0.09
0.12
Total Length
1.94 + (0.94 per 1/2" of stroke)
2.66 + (1.69 per 1" of stroke)
3.38 + (1.81 per 1" of stroke)
3.69 + (2.00 per 1" of stroke)
TOTAL LENGTH
KK Piston
Rod
Threads
TA
RM Pilot
TL
MM Dia.
Piston
Rod
TW
D Across
Wrench
Flats
E1 Dia.
EE Port
TH
N1 Mounting Threads
Bore
7/16"
3/4"
1-1/16"
1-1/2"
A
0.50
0.75
0.75
1.25
C
N/A
0.25
0.25
0.25
D
N/A
0.22
0.38
0.38
E1
0.50
0.81
1.12
1.56
E2
0.75
1.00
1.25
1.75
EE
10-32
1/8 NPT
1/8 NPT
1/4 NPT
G
0.31
0.69
0.75
0.88
KK
10-32
1/4-28
5/16-24
7/16-20
MM
0.187
0.250
0.312
0.437
N1
3/8-24
1/2-20
5/8-18
3/4-16
RM
.370/.375
.494/.498
.621/.624
.746/.749
TA
0.09
0.06
0.06
0.12
TD
0.37
0.50
0.50
0.50
TH
0.25
0.38
0.38
0.38
TL
0.25
0.38
0.38
0.50
TW
1.25
1.75
2.00
2.50
V
0.05
0.08
0.07
0.06
Total Length
1.62 + (0.94 per 1/2" of stroke)
2.31 + (1.69 per 1" of stroke)
2.81 + (1.81 per 1" of stroke)
3.06+ (2.00 per 1" of stroke)
TOTAL LENGTH
A
C
RM Pilot
V
MM Hex
Piston
Rod
EE Port
N1 Mounting Nut
Bore
7/16"
9/16"
3/4"
7/8"
1-1/16"
1-1/4"
1-1/2"
1-3/4"
A
0.50
0.50
0.50
0.50
0.50
0.88
0.88
0.88
C
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.38
E
0.50
0.62
0.81
0.94
1.12
1.34
1.56
1.84
EE
10-32
10-32
1/8 NPT
1/8 NPT
1/8 NPT
1/8 NPT
1/8 NPT
1/4 NPT
G
0.31
0.38
0.44
0.50
0.50
0.63
0.63
0.74
J
0.38
0.50
0.62
0.62
0.88
0.88
0.88
1.25
K
0.19
0.19
0.19
0.19
0.19
0.25
0.25
0.25
KK
10-32
10-32
1/4-28
1/4-28
5/16-24
7/16-20
7/16-20
1/2-20
MM (hex)
0.187
0.187
0.250
0.250
0.375
0.437
0.437
0.500
N1
3/8-24
7/16-20
1/2-20
5/8-18
5/8-18
3/4-16
3/4-16
1-14
RM
.369/.373
.434/.437
.494/.498
.621/.624
.621/.624
.746/.749
.746/.749
1.029/1.032
V
0.05
0.06
0.08
0.09
0.07
0.09
0.09
0.09
Total Length
1.56 + (.94 per 1/2" of stroke)
1.78 + (1.62 per 1" of stroke
1.75 + (1.69 per 1" of stroke)
2.09 + (1.56 per 1" of stroke)
2.19 + (1.56 per 1" of stroke)
2.66 + (1.81 per 1" of stroke)
2.44 + (1.69 per 1" of stroke)
3.03 + (2.00 per 1" of stroke)
ACT-143
ACTUATORS
ACTUATORS
KK Piston
Rod
Threads
G
C
FL
CB
MM Hex
Piston
Rod
E1 Dia.
E2 Dia.
N1 Mounting Threads
Bore
7/16"
9/16"*
3/4"
7/8"
1-1/16"
1-1/4"
1-1/2"
1-3/4"
A
0.50
0.50
0.50
0.50
0.50
0.88
0.88
0.88
C
0.25
0.25
0.25
0.25
0.25
0.25
0.38
0.38
CB
0.31
0.31
0.38
0.38
0.38
0.50
0.62
0.62
CD
0.156
0.156
0.250
0.250
0.250
0.250
0.375
0.375
E1
0.50
0.62
0.81
0.94
1.12
1.34
1.56
1.84
E2
0.74
0.62
0.86
0.94
1.12
1.34
1.56
1.84
EE
10-32
10-32
1/8 NPT
1/8 NPT
1/8 NPT
1/8 NPT
1/8 NPT
1/4 NPT
FL
0.44
0.38
0.62
0.62
0.62
0.78
0.81
1.12
G
0.31
0.38
0.44
0.50
0.50
0.63
0.63
0.74
KK
10-32
10-32
1/4-28
1/4-28
5/16-24
7/16-20
7/16-20
1/2-20
L
0.25
0.25
0.34
0.34
0.34
0.41
0.50
0.50
LH
0.50
N/A
0.75
0.75
0.75
0.88
1.00
N/A
M
0.25
0.19
0.28
0.28
0.28
0.40
0.37
0.50
CD Dia.
Pin
LH
N2 Mounting Thds.
MM (hex)
0.187
0.187
0.250
0.250
0.375
0.437
0.437
0.500
N1
3/8-24
7/16-20
1/2-20
5/8-18
5/8-18
3/4-16
3/4-16
1-14
N2
7/16-20
7/16-20
5/8-18
5/8-18
5/8-18
3/4-16
3/4-16
1-14
RM
.369/.373
.434/.437
.494/.498
.621/.624
.621/.624
.746/.749
.746/.749
1.029/1.032
V
0.03
0.05
0.06
0.09
0.09
0.09
0.09
0.09
0.09
0.12
Y
0.47
0.72
0.75
0.97
0.97
1.06
1.37
1.25
1.62
1.46
V
0.05
0.06
0.08
0.09
0.07
0.09
0.09
0.09
Total Length
2.00 + (.94 per 1/2" of stroke)
2.06 + (1.62 per 1" of stroke)
2.53 + (1.69 per 1" of stroke)
2.72 + (1.56 per 1" of stroke)
2.78 + (1.56 per 1" of stroke)
3.38 + (1.81 per 1" of stroke)
3.25 + (1.69 per 1" of stroke)
4.09 + (2.00 per 1" of stroke)
Bore
5/16"
7/16"
9/16"
3/4"
7/8"
1-1/16"
1-1/4"
1-1/2"
1-3/4"
2"
A
0.38
0.50
0.50
0.50
0.50
0.50
0.75
1.25
0.88
0.88
C
N/A
N/A
N/A
N/A
N/A
0.12
0.25
0.25
0.31
0.38
D
N/A
N/A
N/A
N/A
N/A
0.25
0.38
0.38
0.44
0.50
ACT-144
E1
0.61
0.74
0.62
0.86
0.94
1.12
1.34
1.56
1.84
2.08
E2
0.36
0.50
0.62
0.81
0.94
1.12
1.34
1.56
1.84
2.08
EE
10-32
10-32
10-32
1/8 NPT
1/8 NPT
1/8 NPT
1/8 NPT
1/8 NPT
1/4 NPT
1/4 NPT
G
0.31
0.38
0.38
0.50
0.50
0.50
0.63
0.63
0.75
0.81
KK
5-40
10-32
10-32
1/4-28
1/4-28
5/16-24
7/16-20
7/16-20
1/2-20
1/2-20
MM
0.125
0.187
0.187
0.250
0.250
0.312
0.437
0.437
0.500
0.625
N1
3/8-24
7/16-20
7/16-20
5/8-18
5/8-18
5/8-18
3/4-16
3/4-16
1-14
1-1/4-12
RM
.371/.373
.434/.437
.434/.437
.621/.624
.621/.624
.621/.624
.746/.749
.746/.749
1.029/1.032
1.372/1.375
Total Length
1.49 + (1.25 per 1/2" of stroke)
1.94 + (1.44 per 1/2" of stroke)
2.00 + (2.62 per 1" of stroke)
2.31 + (2.69 per 1" of stroke)
2.31 + (2.56 per 1" of stroke)
2.62 + (2.81 per 1" of stroke)
3.47 + (2.81 per 1" of stroke)
3.19 + (3.00 per 1" of stroke)
4.03 + (3.00 per 1" of stroke)
Consult Factory
Dimensions in inches
KK Piston
Rod
Threads
EE Port
CB
C
MM Dia.
Piston
Rod
D Across
Wrench
Flats
Bore
5/16"*
7/16"
9/16"*
3/4"
7/8"
1-1/16"
1-1/4"
1-1/2"
2"*
A
0.38
0.50
0.50
0.50
0.50
0.50
0.75
1.25
0.88
C
N/A
N/A
N/A
N/A
N/A
0.12
0.25
0.25
0.38
CB
0.25
0.31
0.31
0.38
0.38
0.38
0.50
0.62
0.75
CD
0.125
0.156
0.156
0.250
0.250
0.250
0.250
0.375
0.375
D
N/A
N/A
N/A
N/A
N/A
0.25
0.38
0.38
0.50
EE
10-32
10-32
10-32
1/8 NPT
1/8 NPT
1/8 NPT
1/8 NPT
1/8 NPT
1/4 NPT
N1 Mounting Threads
E
0.61
0.74
0.62
0.86
0.94
1.12
1.34
1.56
2.08
G
0.31
0.38
0.38
0.50
0.50
0.50
0.63
0.63
0.81
KK
5-40
10-32
10-32
1/4-28
1/4-28
5/16-24
7/16-20
7/16-20
1/2-20
L
LH
0.19 N/A
0.25 0.50
0.25 0.50
0.34 0.75
0.34 0.75
0.34 0.75
0.44 0.88
0.50 1.00
0.56 1.63
MM
0.125
0.187
0.187
0.250
0.250
0.312
0.437
0.437
0.625
RM Pilot
M
0.16
0.25
0.19
0.28
0.28
0.28
0.38
0.38
0.44
N1
3/8-24
7/16-20
7/16-20
5/8-18
5/8-18
5/8-18
3/4-16
3/4-16
1-1/4-12
N2
3/8-24
7/16-20
7/16-20
3/4-16
3/4-16
1-1/4-12
CD Dia.
PIN
LH
N2 Mounting Threads
RM
.371/.373
.434/.437
.434/.437
.621/.624
.621/.624
.621/.624
.746/.749
.746/.749
1.372/1.375
V
0.03
0.05
0.06
0.09
0.09
0.09
0.09
0.09
0.12
Y
0.47
0.72
0.75
0.97
0.97
1.06
1.37
1.25
1.46
Total Length
1.88 + (1.25 per 1/2" of stroke)
2.38 + (1.44 per 1/2" of stroke)
2.28 + (2.62 per 1" of stroke)
2.44 + (2.69 per 1" of stroke)
2.62 + (2.56 per 1" of stroke)
2.78 + (2.81 per 1" of stroke)
3.78 + (2.81 per 1" of stroke)
3.88 + (3.00 per 1" of stroke)
Consult Factory
RM
Pilot
A
MM Dia.
Piston
Rod
Bore
3/4"
1-1/16"
1-1/2"
A
0.75
0.75
1.25
C
0.25
0.25
0.25
D
0.22
0.38
0.38
DB
1/4-20
1/4-20
5/16-18
V
C
D Across
Wrench
Flats
KK Piston
Rod
Threads
RT Threads
BC Bolt Circle
(2)
DN
H
DN
0.63
0.81
1.12
SB
10-32
10-32
0.25
E2
DB Thds
C'Bore for SB Socket
Head Cap Screw
(2)
E1
1.00
1.25
1.75
E2
0.81
1.12
1.56
EE
1/8 NPT
1/8 NPT
1/4 NPT
H
0.38
0.62
0.88
KK
1/4-28
5/16-24
7/16-20
EE PORT
L
1.09
1.22
1.63
MM
0.250
0.312
0.437
RM
0.62
0.75
1.00
RT
10-32
10.32
1/4-20
BC
1.00
1.25
1.75
V
0.09
0.07
0.12
Y
0.5
0.54
0.65
Total Length
2.56 + (2.69 per 1" of stroke)
3.12 + (2.81 per 1" of stroke)
3.69 + (3.00 per 1" of stroke)
ACT-145
ACTUATORS
ACTUATORS
KK Piston
Rod
Threads
E2
SQ
EE Port
V
C
MM Dia.
Piston
Rod
D Across
Wrench
Flats
Bore
3/4"
1-1/16"
1-1/2"
A
0.75
0.75
1.25
C
0.25
0.25
0.25
D
0.22
0.25
0.38
E1
0.86
1.12
1.56
E2
1.00
1.25
1.75
N1
Mounting Threads
EE
1/8 NPT
1/8 NPT
1/4 NPT
G
0.50
0.50
0.62
KK
1/4-28
5/16-24
7/16-20
MM
0.250
0.312
0.437
E1 Dia.
N1
5/8-18
5/8-18
3/4-16
RM Pilot
RM
.621/.624
.621/.624
.746/.749
RT Threads
BC Bolt Circle
(2)
RT
10-32
10-32
1/4-20
BC
1.00
1.25
1.75
V
0.09
0.09
0.09
Y
0.97
1.06
1.25
Total Length
3.22 + (2.69 per 1" of stroke)
3.53 + (2.81 per 1" of stroke)
3.88 + (3.00 per 1" of stroke)
A
B
M
E
BA
CD Dia.
Part Number A
PB-1
0.50
B
0.28
BA
0.50
CD
0.16
DD
0.19
E
F
0.75 0.06
FL
G
J
0.77 0.12 0.56
M
0.20
PB-2
0.81
0.44
0.75
0.25
0.27
1.12 0.12
0.31
PB-3
PB-4
PB-5
1.00
1.13
1.44
0.62
0.68
0.88
1.00
1.00
1.25
0.38
0.38
0.50
0.27
0.26
0.27
1.50 0.12
1.50 0.25
1.75 0.25
0.38
0.38
0.50
DD
DD
Bore
7/16", 9/16"
3/4", 7/8",
1-1/16", 1-1/4"
1-1/2"
1-3/4",2", 2-1/2"
3"
Part Number
PB-0
PB-1K
.156 THRU
2 HOLES
.625
.13
.19
PB-2K
.387
.41
PB-3K
PB-4K
PB-5K
.130 dia.
thru
.50
.26
Rod Clevis
(Includes Pin & Jam Nut)
LH
CB
Dia.
CA
L
CD
CE
KK
ACT-146
Bore
5/16"
7/16", 9/16"
3/4", 7/8"
1-1/16"
1-1/4", 1-1/2"
1-3/4, 2", 2-1/2"
3"
Part Number
RC-0
RC-1
RC-2
RC-3
RC-4
RC-5
RC-6
CA
0.13
0.19
0.25
0.25
0.38
0.38
0.50
CB dia.
0.13
0.19
0.25
0.25
0.38
0.38
0.50
CD
0.56
0.94
1.19
1.19
1.69
1.69
2.75
CE
0.44
0.75
0.94
0.94
1.31
1.31
2.25
CH
0.31
0.38
0.50
0.50
0.75
0.75
1
KK
5-40
10-32
1/4-28
5/16-24
7/16-20
1/2-20
5/8-18
L
0.38
0.56
0.68
0.69
0.94
0.94
1.5
CHSQ
LH
0.5
0.66
0.85
0.85
1.12
1.12
1.41
N
0.16
0.12
0.16
0.19
0.25
0.31
0.38
Dimensions in inches
Foot Bracket
Bore
J
CD Dia.
BA
F
0.06
0.06
0.07
0.09
0.10
0.12
FL
0.44
0.44
0.56
0.56
0.69
0.81
J
0.75
0.75
0.88
0.83
1.09
1.38
FB-5
1.50 0.75
1.88 0.62
0.75 0.28 2.50
FB-5A
1.50 0.88
2.25 0.75
1.03 0.34 3.00
FB-6
1.62 1.00
2.25 0.62
1.38 0.34 3.12
FB-7
1.62 1.00
2.88 0.75
1.50 0.34 3.75
FB-8
1.62 1.00
3.50 0.89
1.63 0.34 4.38
D = Double Acting Models
S/D = Single and Double Acting Models
0.12
0.19
0.25
0.25
0.26
1.00
1.25
1.50
1.75
1.89
1.75
2.13
2.50
3.00
3.14
C
A
FL
5/16"(S)
5/16"(D)
7/16"(S)
7/16"(D), 9/16"(S/D)
3/4"(S)
3/4"(D), 7/8"(S/D), 1-1/16"(S/D)
1-1/4"(S/D), 1-1/2"(S/D)
1-3/4"(S/D)
2"(S/D)
2-1/2"(D)
3"(D)
S = Single Acting Models
Part
Number
FB-0S
FB-0D
FB-1
FB-2
FB-3
FB-4
E
1.00
1.00
1.38
1.38
1.62
1.88
DD
A
0.38
0.38
0.62
0.69
0.75
1.00
B
0.25
0.25
0.31
0.38
0.44
0.56
BA
0.75
0.75
1.00
1.00
1.25
1.50
C
0.13
0.13
0.12
0.12
0.19
0.25
CD
0.25
0.38
0.38
0.44
0.50
0.62
DD
0.13
0.13
0.19
0.19
0.19
0.27
Trunnion Bracket
A
DD Dia.
thru 4 holes
A
BA
E
.38 rad.
CD dia.
thru
FL
J
M
G
Bore
7/16"
3/4", 1-1/16", 1-1/2"
Part number
PB-4
TB-1
A
1.13
1.13
B
0.69
0.69
BA
1.00
1.00
CD
0.38
0.50
DD
0.27
0.27
E
1.50
1.50
F
0.25
0.25
FL
1.75
1.75
G
0.25
0.25
J
1.38
1.38
M
0.38
0.38
Mounting Nut
E HEX
Bore
N Threads
5/16"
7/16"
9/16"
3/4"
7/8", 1-1/16"
1-1/4", 1-1/2"
1-3/4"
2"
ACT-147
ACTUATORS
ACTUATORS
Technical Data
Medium:
Filtered, lubricated or nonlubricated, compressed air
Maximum Operating
Pressure:
Lubrication:
All RPHD cylinders are prelubricated during assembly with a
Teflon based grease for nonlube service and long life.
Materials:
Cylinder Body:
304 Stainless Steel
Head and Cap:
Aluminum alloy
Piston Rods:
300 series, chrome plated
stainless steel
Rod Bearings:
Oil impregnated sintered bronze
Piston:
Aluminum Alloy or stainless steel
Rod & Piston Seals: Nitrile
Pivot bracket, rod clevis, foot
bracket, mounting nut:
Bright zinc plated carbon steel
ACT-148
Options selector
RPHD 106 x 3.250 - DAN - M2
Series
RPHD Series
Magnetic
Substitute
RPHD
Bore
9/16"
3/4"
1-1/16"
1-1/4"
1-1/2"
1-3/4"
2"
2-1/2"
Substitute
056
075
106
125
150
175
200
250
Stroke
Increments of 1/16"
up to 36"
Options
Substitute
Viton / High Temp seals
HT*
Switch rail and position
M1, M2, M3, M4
Side Ported end cap
PC
(DAN mount only)
Alternate port location
PL(__)
Plain rod end
PR**
Rod extension over std.
RX(_)
(specify additional length)
Thread extension over std.
TX(_)
(specify additional length)
Bumpers both ends
UB*
*Viton seals and Bumpers are available in
combination; however, the temperature rating
of the cylinder is limited to the maximum
temperature rating of the bumpers.
Note: The magnetic field could be
compromised with temperatures in excess
of 200F.
** PR Rod end will not have threads, but will
maintian the standard A dimension.
Mounting Options
(All models are double acting)
Nose
Double End (with pivot bushing)
Double Rod End
Substitute
DAN
DAD
DRD
6
8
5
1 Pivot Bushing (DAD model): Sintered bronze pivot bushing
compensating.
2 Piston Seals: Lip-Type nitrile piston seals are wear
7 Head and Cap: Solid aluminum alloy for strength and durability.
switches.
Options
Switch Rail Mounting Position
Switch rail can be
mounted in 4 positions
M1 = position 1
M2 = position 2
M3 = position 3
M4 = position 4
Switches ordered
separately
M1
M4
Option PL(__)
Alternate Port Location
Designate location on head and
cap respectively. For Example:
L(12) = Head port location #1, and
cap port location #2.
Bore
M2
9/16"
3/4"
1-1/16"
1-1/4"
1-1/2"
1-3/4"
2"
2-1/2"
UB option
length adder
0.125"
0.250"
0.250"
0.250"
0.250"
0.250"
0.250"
0.250"
M3
ACT-149
ACTUATORS
Bore
9/16"
3/4"
1-1/16"
1-1/4"
1-1/2"
1-3/4"
2"
2-1/2"
Code
(056)
(075)
(106)
(125)
(150)
(175)
(200)
(250)
A
0.50
0.59
0.63
0.75
0.88
1.00
1.00
1.25
C
N/A
0.25
0.25
0.25
0.25
0.31
0.31
0.38
D
N/A
0.25
0.31
0.38
0.44
0.50
0.50
0.63
EE
#10-32
1/8 NPT
1/8 NPT
1/8 NPT
1/4 NPT
1/4 NPT
1/4 NPT
3/8 NPT
E1
0.61
1.13
1.13
1.34
1.56
1.84
2.08
2.63
E2
0.61
0.81
1.13
1.34
1.56
1.84
2.08
2.63
G
0.38
0.75
0.88
1.00
1.06
1.25
1.31
1.44
J
0.50
0.63
0.88
0.88
0.88
1.25
1.25
1.75
K
0.19
0.19
0.19
0.25
0.25
0.25
0.31
0.31
KK
#10-32
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
1/2-20
5/8-18
LB
2.53
3.53
3.78
3.91
4.13
4.63
5.09
5.41
MM
0.187
0.312
0.375
0.437
0.500
0.562
0.625
0.750
N1
7/16-20
5/8-18
3/4-16
7/8-14
1-14
1-1/8-12
1-1/4-12
1-3/8-12
RM
.434/.437
.621/.624
.746/.749
.871/.874
.996/.999
1.121/1.124
1.246/1.249
1.371/1.374
V
0.06
0.06
0.06
0.08
0.09
0.09
0.11
0.13
Y
0.75
1.28
1.44
1.56
1.66
1.91
2.03
2.22
Bore
9/16"
3/4"
1-1/16"
1-1/4"
1-1/2"
1-3/4"
2"
2-1/2"
Code
(056)
(075)
(106)
(125)
(150)
(175)
(200)
(250)
A
0.50
0.59
0.63
0.75
0.88
1.00
1.00
1.25
C
N/A
0.25
0.25
0.25
0.25
0.31
0.31
0.38
D
N/A
0.25
0.31
0.38
0.44
0.50
0.50
0.63
E
0.61
1.13
1.13
1.34
1.56
1.84
2.08
2.63
EE
#10-32
1/8 NPT
1/8 NPT
1/8 NPT
1/4 NPT
1/4 NPT
1/4 NPT
3/8 NPT
G
0.38
0.75
0.88
1.00
1.06
1.25
1.31
1.44
KK
#10-32
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
1/2-20
5/8-18
ACTUATORS
Bore
9/16"
3/4"
1-1/16"
1-1/4"
1-1/2"
1-3/4"
2"
2-1/2"
Code
(056)
(075)
(106)
(125)
(150)
(175)
(200)
(250)
A
0.50
0.59
0.63
0.75
0.88
1.00
1.00
1.25
C
N/A
0.25
0.25
0.25
0.25
0.31
0.31
0.38
ACT-150
LB
2.56
3.97
4.09
4.16
4.50
4.94
5.47
6.09
MM
0.187
0.312
0.375
0.437
0.500
0.562
0.625
0.750
N1
7/16-20
5/8-18
3/4-16
7/8-14
1-14
1-1/8-12
1-1/4-12
1-3/8-12
RM
.434/.437
.621/.624
.746/.749
.871/.874
.996/.999
1.121/1.124
1.246/1.249
1.371/1.374
V
0.06
0.06
0.06
0.08
0.09
0.09
0.11
0.13
Y
0.75
1.28
1.44
1.56
1.66
1.91
2.03
2.22
Z
0.13
0.28
0.34
0.34
0.41
0.41
0.44
0.63
LB + Stroke
XD + Stroke
Y
FL
V
(2X)
CB
KK piston
rod threads
D across
wrench flats
N1 mounting
threads (2X)
CB
CD
D
0.31
0.16 N/A
0.44
0.22 0.25
0.50
0.25 0.31
0.63
0.31 0.38
0.69
0.38 0.44
0.75
0.38 0.50
0.86
0.44 0.50
1.00
0.50 0.63
CD bushing
EE port
threads (2X)
E
0.61
1.13
1.13
1.34
1.56
1.84
2.08
2.63
EE
#10-32
1/8 NPT
1/8 NPT
1/8 NPT
1/4 NPT
1/4 NPT
1/4 NPT
3/8 NPT
FL
0.38
0.63
0.72
0.81
0.97
0.97
1.09
1.31
G
0.38
0.75
0.88
1.00
1.06
1.25
1.31
1.44
KK
#10-32
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
1/2-20
5/8-18
L
0.25
0.34
0.38
0.47
0.56
0.56
0.66
0.69
LB
3.00
4.59
4.78
5.00
5.53
5.97
6.63
7.41
MM
0.187
0.312
0.375
0.437
0.500
0.562
0.625
0.750
N1
7/16-20
5/8-18
3/4-16
7/8-14
1-14
1-1/8-12
1-1/4-12
1-3/8-12
RM
.434/.437
.621/.624
.746/.749
.871/.874
.996/.999
1.121/1.124
1.246/1.249
1.371/1.374
V
0.06
0.06
0.06
0.08
0.09
0.09
0.11
0.13
XD
2.81
4.31
4.47
4.63
5.06
5.50
6.13
6.78
Y
0.75
1.28
1.44
1.56
1.66
1.91
2.03
2.22
Bore
9/16"
3/4"
1-1/16"
1-1/4"
1-1/2"
1-3/4"
2"
2-1/2"
Code
(056)
(075)
(106)
(125)
(150)
(175)
(200)
(250)
A
0.50
0.59
0.63
0.75
0.88
1.00
1.00
1.25
C
N/A
0.25
0.25
0.25
0.25
0.31
0.31
0.38
D
N/A
0.25
0.31
0.38
0.44
0.50
0.50
0.63
E
0.61
1.13
1.13
1.34
1.56
1.84
2.08
2.63
EE
#10-32
1/8 NPT
1/8 NPT
1/8 NPT
1/4 NPT
1/4 NPT
1/4 NPT
3/8 NPT
G
0.38
0.75
0.88
1.00
1.06
1.25
1.31
1.44
KK
#10-32
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
1/2-20
5/8-18
LB
3.19
4.41
4.69
4.88
5.25
5.81
6.50
7.00
MM
0.187
0.312
0.375
0.437
0.500
0.562
0.625
0.750
N1
7/16-20
5/8-18
3/4-16
7/8-14
1-14
1-1/8-12
1-1/4-12
1-3/8-12
RM
.434/.437
.621/.624
.746/.749
.871/.874
.996/.999
1.121/1.124
1.246/1.249
1.371/1.374
V
0.06
0.06
0.06
0.08
0.09
0.09
0.11
0.13
Y
0.75
1.28
1.44
1.56
1.66
1.91
2.03
2.22
ZM
3.19
4.91
5.19
5.38
5.75
6.44
7.13
7.75
A
(2X)
M
(2X)
G
(2X)
CD
Pivot pin
Code
(056)
(075)
(106)
(125)
(150)
(175)
(200)
(250)
N threads
DD
(4X)
F
(2X)
Bore
9/16"
3/4"
1-1/16"
1-1/4"
1-1/2"
1-3/4"
2"
2-1/2"
Part Number
PB-1K
PB-52
PB-53
PB-54
PB-55
PB-56
PB-57
PB-58
A
0.50
0.81
0.81
0.88
1.00
1.13
1.19
1.38
B
0.28
0.50
0.50
0.56
0.63
0.69
0.75
0.88
BA
0.50
0.56
0.56
0.81
1.00
1.00
1.19
1.38
CD
0.16
0.22
0.25
0.31
0.38
0.38
0.44
0.50
B
(2X)
BA
(2X)
E
(2X)
J
(2X)
PA
DD
0.20
0.28
0.28
0.28
0.28
0.34
0.34
0.41
E
0.75
1.06
1.06
1.31
1.50
1.63
1.81
2.13
F
0.06
0.12
0.12
0.16
0.19
0.19
0.25
0.25
PB
FL
0.77
1.03
1.06
1.31
1.50
1.63
1.81
2.13
G
0.13
0.25
0.25
0.25
0.25
0.31
0.31
0.38
J
0.56
0.81
0.81
1.00
1.13
1.25
1.38
1.63
M
0.20
0.22
0.25
0.31
0.38
0.38
0.44
0.50
PA
0.34
0.44
0.50
0.63
0.69
0.75
0.88
1.00
PB
0.63
0.88
0.94
1.19
1.44
1.44
1.69
2.22
Bore
9/16"
3/4"
1-1/16"
1-1/4"
1-1/2"
1-3/4"
2"
2-1/2"
Code
(056)
(075)
(106)
(125)
(150)
(175)
(200)
(250)
Part Number
MN-2
MN-4
MN-5
MN-54
MN-5A
MN-56
MN-6
MN-7
E
0.69
0.94
1.13
1.31
1.50
1.69
1.88
2.25
N
7/16-20
5/8-18
3/4-16
7/8-14
1-14
1-1/8-12
1-1/4-12
1-3/8-12
T
0.25
0.38
0.42
0.51
0.55
0.64
0.50
0.50
CH
(2X)
LH
CD
CE
CB Pivot pin
BA
KK threads
N
CA
C
(2X)
KK Jam nut
Bore
9/16"
3/4"
1-1/16"
1-1/4"
1-1/2"
1-3/4"
2"
2-1/2"
Code
(056)
(075)
(106)
(125)
(150)
(175)
(200)
(250)
Part Number
RC-1
RC-52
RC-53
RC-54
RC-55
RC-56
RC-57
RC-6
CA
0.19
0.22
0.25
0.31
0.38
0.38
0.44
0.50
CB
0.19
0.22
0.25
0.31
0.38
0.38
0.44
0.50
CD
thru
DD
(2X)
FL
CD
0.94
1.44
1.44
1.69
2.00
2.13
2.31
2.75
CE
0.75
1.19
1.19
1.38
1.63
1.75
1.88
2.25
CH
0.38
0.44
0.50
0.63
0.75
0.75
0.88
1.00
KK
#10-32
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
1/2-20
5/8-18
L
0.56
0.75
0.75
0.94
1.13
1.13
1.31
1.50
LH
0.66
0.63
0.69
0.88
1.03
1.03
1.14
1.41
N
0.13
0.16
0.20
0.23
0.26
0.32
0.32
0.39
Bore
9/16"
3/4"
1-1/16"
1-1/4"
1-1/2"
1-3/4"
2"
2-1/2"
Code
(056)
(075)
(106)
(125)
(150)
(175)
(200)
(250)
Part Number
FB-2
FB-4
FB-53
FB-54
FB-55
FB-56
FB-57
FB-58
A
0.69
1.00
0.94
1.16
1.31
1.44
1.59
1.88
B
0.38
0.56
0.53
0.66
0.75
0.81
0.91
1.06
BA
1.00
1.50
1.38
1.56
1.81
2.13
2.38
3.00
C
0.13
0.25
0.23
0.31
0.37
0.37
0.43
0.50
CD
0.44
0.63
0.75
0.88
1.00
1.13
1.25
1.38
DD
0.20
0.28
0.28
0.28
0.28
0.34
0.34
0.41
E
1.38
1.88
1.88
2.13
2.38
2.75
3.00
3.75
F
0.09
0.12
0.12
0.16
0.19
0.19
0.22
0.25
FL
0.56
0.81
0.81
1.00
1.13
1.25
1.38
1.63
J
0.83
1.38
1.44
1.75
2.00
2.19
2.44
2.81
ACT-151
ACTUATORS
ACTUATORS
Options selector
RPD 106 x 3.250 - DAN - PS
Series
RPD Series Delrin end cap
RPD
RPD Series Delrin with
*ERPD
Ecology Seals*
* Ecology version not available on
Additional Options
Alternate female thread
(Specify thread type)
Viton seals
Switch rail and position
Bore Size
9/16"
3/4"
1-1/16"
1-1/2"
2"
Stroke
Increments of 1/16" up to 36"
056
075
106
150
200
HT**
M1, M2,
M3, M4
PC
PL(_)
PR
PS
RX(_)
RW
TM (_)
TX(_)
UB
ACT-152
FT (_)
Delrin is a registered trademark of E.I. Du Pont de Nemours and Company for its brand of acetal resin.
For detailed technical specifications on the properties of Delrin, please contact DuPont (www.dupont.com).
ACT-153
ACTUATORS
ACTUATORS
LB + STROKE
EE
(2X)
Y
V
J
MM
KK
D
(ACROSS
FLATS)
Bore
9/16"
3/4"
1-1/16"
1-1/2"
2"
(056)
(075)
(106)
(150)
(200)
A
0.50
0.50
0.50
0.75
0.88
C
--0.13
0.25
0.38
N1
RM
D
--0.25
0.38
0.50
E
0.61
0.81
1.13
1.56
2.08
EE
#10-32
1/8 NPT
1/8 NPT
1/8 NPT
1/4 NPT
G
0.38
0.50
0.50
0.63
0.81
J
0.50
0.63
0.88
0.88
1.25
K
0.19
0.19
0.19
0.25
0.31
KK
#10-32
1/4-28
5/16-24
7/16-20
1/2-20
LB
2.28
2.97
3.25
3.69
4.69
LB
Ecology
or PC
-3.41
3.50
3.88
5.06
LB
Bumpers
2.41
2.97
3.38
3.82
4.94
MM
0.19
0.25
0.31
0.44
0.63
N1
7/16-20
5/8-18
5/8-18
1-14
1-1/4-12
RM
.434/.437
.621/.624
.621/.624
.996/.999
1.371/1.374
V
0.06
0.09
0.09
0.09
0.13
Y
0.38
0.47
0.56
0.63
0.73
PS (Magnetic Piston) length adder: 1-1/16" & 1-1/2" bores = 0.125". 9/16", 3/4", and 2" bores = 0.25".
When PS (magnetic piston) and Ecology options are ordered in combination, use LB Ecology length only - do not add extra length for the magnet.
LB + STROKE
G
FL
EE
(2X)
CB
MM
KK
CD
D
(ACROSS
FLATS)
RM
N1
Bore
LB
CB
CD
EE
LB
FL
KK
LB
Ecology
Bumpers
MM
N1
RM
9/16"
(056)
0.50
--
0.31
0.16
--
0.61 #10-32
0.38
0.38
#10-32
0.25
2.56
2.69
0.19
0.19
7/16-20
.434/.437
0.06
0.38
3/4"
(075)
0.50
--
0.38
0.25
--
0.63
0.50
1/4-28
0.34
3.75
3.75
3.75
0.28
0.25
5/8-18
.621/.624
0.09
0.47
1-1/16" (106)
0.50
0.13 0.38
0.25
0.25
0.63
0.50
5/16-24 0.34
3.84
3.84
3.97
0.28
0.31
5/8-18
.621/.624
0.09
0.56
1-1/2"
(150)
0.75
0.25 0.63
0.38
0.38
0.78
0.63
7/16-20 0.50
4.38
4.38
4.50
0.38
0.44
1-14
.996/.999
0.09
0.63
2"
(200)
0.88
0.38 0.74
0.38
0.50
1.03
0.81
1/2-20
5.63
5.63
5.88
0.44
0.63
1-1/4-12
1.371/1.374
0.13
0.73
0.56
PS (Magnetic Piston) length adder: 1-1/16" & 1-1/2" bores = 0.125". 9/16", 3/4", and 2" bores = 0.25".
When PS (magnetic piston) and Ecology options are ordered in combination, use LB Ecology length only - do not add extra length for the magnet.
EE
(2X)
MM
MM
KK
D
(ACROSS
FLATS)
Bore
KK
N1
RM
N1
D
(ACROSS
FLATS)
RM
LB
LB
EE
KK
LB
Ecology
Bumpers
MM
N1
RM
9/16"
(056)
0.50
--
--
0.61
#10-32
0.38
#10-32
2.94
3.06
0.19
7/16-20
.434/.437
0.06
0.38
3/4"
(075)
0.50
--
--
0.86
1/8 NPT
0.50
1/4-28
4.00
4.00
4.00
0.25
5/8-18
.621/.624
0.09
0.47
1-1/16" (106)
0.50
0.13
0.25
1.13
1/8 NPT
0.50
5/16-24
4.00
4.00
4.50
0.31
5/8-18
.621/.624
0.09
0.56
1-1/2"
(150)
0.75
0.25
0.38
1.56
1/8 NPT
0.63
7/16-20
5.13
5.13
5.25
0.44
1-14
.996/.999
0.09
0.63
2"
(200)
0.88
0.38
0.50
2.08
1/4 NPT
0.81
1/2-20
6.56
6.56
6.81
0.63
1-1/4-12
1.371/1.374
0.13
0.73
ACT-154
Dimensions in inches
S
Stainless steel Pivot Bracket
(includes pin)
CD
CA
CB
LH
CH
FL
J
CB
BA
CE
KK
DD
(2X)
E
CH
Bore
Bore
P/N
CA
CB
CD
CE
CH
LH
KK
9/16"
(056)
DRC-056 0.19
0.13
3/4"
(075)
DRC-075 0.25
0.16
1-1/16" (106)
DRC-106 0.25
1-1/2" (150)
DRC-150 0.38
2"
DRC-200 0.38
(200)
P/N
BA
CB
DD
FL
9/16"
0.13 0.76
3/4"
0.19 1.19
0.19 1.19
1-1/2"
0.25 1.75
2"
0.25 1.75
0.31
DD
B
A
BA
CD
J
FL
N
F
Bore
Bore
P/N
BA
CD
DD
FL
9/16"
056
RPDFB-056
0.69
0.38
0.97
0.13
0.44
0.19 1.38
0.09
0.56 0.84
3/4"
075
RPDFB-075
1.00
0.56
1.44
0.23
0.63
0.27 1.88
0.12
0.81 1.38
9/16"
1-1/16" 106
RPDFB-075
1.00
0.56
1.44
0.23
0.63
0.27 1.88
0.12
0.81 1.38
3/4"
P/N
Maximum
torque (in-lbs.)
(056)
52025-SS
0.69
(075)
52027-SS
0.94
7/16-20
0.25
5/8-18
0.38
52027-SS
12
0.94
5/8-18
0.38
12
1-1/2"
150
RPDFB-150
1.50
0.75
1.88
0.72
1.00
0.28 2.50
0.12
1.00 1.75
1-1/16" (106)
2"
200
RPDFB-200
1.63
1.00
2.25
0.61
1.38
0.34 3.13
0.25
1.50 2.50
1-1/2"
(150)
52030-SS
1.50
1-14
0.55
30
2"
(200)
52085-SS
1.88
1-1/4-12
0.50
45
ACT-155
ACTUATORS
ACTUATORS
RT Series Roundline
Plus Thrusters
9/16" to 3" bore
Composite and Roller Bearings
PS magnetic piston option
Optional ecology seal
Optional shock absorbers
Choice of high load composite or
precision low friction bearings
Comes with stroke adjusting
collars
Technical data
Medium:
Filtered, lubricated or nonlubricated, compressed air
Operating Pressure
250 psig (17.2 Bar) Max.
Temperature Range:
Standard Nitrile seals:
-20F to 200F (-29C to 93C)
*With dew point of supply air less than air
temperature below 35F (2C)
Lubrication:
All Roundline Thruster cylinders
are prelubricated at the time of
assembly with a Teflon-Based
grease, for non-lube service and
long life.
Thruster Materials:
Guide shafts with composite
bearings:
9/16" to 2.0" bore: Chrome plated
303 SS.
2-1/2" to 3.0": Chrome plated
carbon
steel.
Guide shafts with roller bearings:
All bore sizes case hardened
carbon steel shafts.
Body: Anodized aluminum housing
and tooling plate. Choice of
composite or roller bearing shaft
guides.
Cylinder Materials:
304 Stainless Steel body
Aluminum alloy head,cap
and piston
Oil impregnated sintered bronze
rod bearing
Chrome Plated stainless steel
piston rod.
Nitrile piston and rod seals
ACT-156
Options selector
RT 075 C x 4.50 CC
Series
Roundline Thruster
Roundline Cylinder
with *Ecology Seals
Bore Size
9/16"
3/4"
1-1/16"
1-1/2"
2"
2-1/2"
3"
RT
ERT*
056
075
106
150
200
250
300
E
E
E
E
E
E
Bearing Type
Composite
Roller
C
R
Options
Stroke Adjustment (Collar & Bumper) Extend
Stroke Adjustment (Collar & Bumper) Both Ends
Stroke Adjustment (Collar & Bumper) Retract
Adjustable Cushion Both Ends
Adjustable Cushion Cap End (Retract)
Adjustable Cushion Head End (Extend)
Dowel Pin*
Switch Rail
Mounting Plate (Composite only)**
No Mounting Plate (Roller only)**
Non-Adjustable cushions both ends
Non-Adjustable cushion cap end (Retract)
Non-Adjustable cushion head end (Extend)
Side Ported
Magnetic Piston
Shock Absorber Extend
Shock Absorber Retract
Shock Absorber Both
Tapped Mounting Holes (Composite only)**
Stainless Steel Tooling Plate
Internal Bumpers
AE
AJ
AR
CB
CC
CH
DP
M1
MP
NM
NB
NC
NH
PC
PS
SG ()
SH ()
SJ ()
TH
TP
UB
Features
PS Magnetic piston option for position sensing with either Reed or Hall
Effect switches.
Optional ecology seal with non-adjustable cushion for the optimum in
smooth, noise dampening deceleration of load at end of stroke.
Composite bearing:
9/16" to 2.0" bore has stainless steel guide shafts
2-1/2" and 3.0" bore has chrome plated carbon steel
guide shafts
11
1
2
9
5
6
8
This product is for demonstration purposes only.
Code
056
075
106
150
200
250
300
ACT-157
ACTUATORS
ACTUATORS
Composite Bearing
Bore
9/16"
3/4"
1-1/16"
1-1/2"
2"
2-1/2"
3"
A
2.50
3.00
4.25
5.50
6.00
7.50
9.00
B
0.90
1.15
1.75
2.25
2.75
3.25
4.00
BB
#8-32
#10-32
1/4-20
5/16-18
5/16-18
3/8-16
1/2-13
C
0.60
0.75
1.00
1.50
2.00
2.25
2.75
CC
0.62
0.81
1.12
1.56
2.08
2.62
3.12
D
1.25
1.50
2.00
3.00
3.00
3.75
4.50
DD
#6-32
#8-32
#10-32
1/4-28
1/4-28
1/4-28
1/4-28
E
#8
#10
1/4"
5/16"
5/16"
3/8"
1/2"
EE
#10-32
1/8 NPT
1/8 NPT
1/8 NPT
1/4 NPT
1/4 NPT
3/8 NPT
F
0.63
0.75
1.12
1.25
1.50
1.88
2.25
G
0.45
0.58
0.88
1.12
1.38
1.63
2.00
H
0.38
0.50
0.62
0.75
1.00
1.25
1.50
HH
7/16-20
5/8-18
5/8-18
3/4-16
1-1/4-12
1-3/8-12
1-1/2-12
K
1.25
0.78
0.81
1.12
1.00
1.75
2.00
KK
10-32
1/4-28
5/16-24
7/16-20
1/2-20
1/2-20
5/8-18
L
0.75
0.94
1.38
1.75
2.00
2.50
3.00
LB
3.50
4.25
5.00
6.38
7.12
9.75
11.50
M
1.00
1.25
1.88
2.38
2.70
3.50
4.20
MM
0.19
0.25
0.31
0.44
0.62
0.62
0.75
Q
0.25
0.38
0.50
0.50
0.50
1.00
1.00
Bore
9/16"
3/4"
1-1/16"
1-1/2"
2"
2-1/2"
3"
R
0.88
1.12
1.31
1.50
1.62
1.87
2.25
S
0.38
0.50
0.62
0.75
0.88
1.13
1.38
T
0.34
0.41
0.44
0.50
0.50
0.50
0.56
W
0.15
0.20
0.38
0.38
0.38
0.50
0.63
X
0.25
0.38
0.38
0.50
0.75
0.75
1.00
Z
0.86
0.85
1.00
1.38
1.60
1.45
1.62
AA
0.75
1.00
1.50
2.00
2.25
3.00
3.50
AB
3.50
4.50
6.25
7.50
8.00
11.50
13.00
AC
1.25
1.50
2.12
2.75
3.00
3.75
4.50
AD
0.22
0.25
0.38
0.44
0.44
0.69
0.81
AE
1.00
1.25
2.00
2.50
3.00
3.50
4.50
AF
0.31
0.38
0.50
0.59
0.75
0.84
1.15
AG
0.38
0.50
1.00
1.31
1.50
1.81
2.19
AM
0.12
0.16
0.31
0.38
0.50
0.50
0.75
AN
0.75
0.94
1.38
1.75
2.00
2.50
3.00
AP
0.50
0.62
1.00
1.25
1.50
1.75
2.25
AQ
3.00
3.75
5.25
6.50
7.00
9.50
11.00
AR
1.75
2.12
3.12
4.00
4.25
5.37
6.50
AT
1.75
2.12
3.12
4.00
4.25
5.37
6.50
ZZ
#10-32
1/4-20
5/16-18
3/8-16
3/8-16
1/2-13
3/4-16
Composite Bearing
Per Inch Adder
.08 lbs
.15 lbs
30 lbs
.35 lbs
.50 lbs
.75 lbs
1.9 lbs
Roller Bearing
Per Inch Adder
.05 lbs
.10 lbs
.16 lbs
.25 lbs
.40 lbs
.62 lbs
.96 lbs
Mounting Plate
Adder
.06 lbs
.14 lbs
.32 lbs
.60 lbs
1.15 lbs
2.0 lbs
3.9 lbs
Guide shafts are extended so the extend stroke is not affected with the addition of bumpers and collars, however the
retract stroke is shortened. See above chart.
ACT-158
Roller Bearing
Bore
A
9/16"
2.50
3/4"
3.00
1-1/16" 4.25
1-1/2" 5.50
2"
7.00
2-1/2" 8.50
3"
11.00
B
1.00
1.25
2.00
2.50
3.00
4.00
4.00
BB
#8-32
#10-32
1/4-20
5/16-18
3/8-16
3/8-16
1/2-13
C
0.60
0.75
1.00
1.50
2.00
3.00
3.00
CC
0.62
0.81
1.12
1.56
2.08
2.62
3.12
D
DD
1.25 4-40
1.50 6-32
2.00 8-32
3.00 10-32
4.00 1/4-28
4.75 1/4-28
6.00 1/4-28
E
#8
#10
1/4
5/16
3/8
3/8
1/2
EE
#10-32
1/8 NPT
1/8 NPT
1/8 NPT
1/4 NPT
1/4 NPT
3/8 NPT
F
0.62
0.75
1.12
1.25
1.50
1.76
2.50
G
0.50
0.62
1.00
1.25
1.50
2.00
2.00
H
0.31
0.38
0.50
0.75
1.00
1.25
1.50
HH
7/16-20
5/8-18
5/8-18
3/4-16
1 1/4-12
1 3/8-12
1 1/2-12
K
1.25
0.78
0.81
1.12
0.94
1.69
1.50
KK
10-32
1/4-28
5/16-24
7/16-20
1/2-20
1/2-20
5/8-18
L
0.75
0.94
1.38
1.75
2.12
2.63
4.00
LB
3.50
4.12
4.75
6.38
7.00
9.50
11.50
M
1.00
1.25
1.88
2.38
3.25
4.10
5.25
MM
0.19
0.25
0.31
0.44
0.62
0.62
0.75
Q
0.25
0.38
0.50
0.50
0.63
1.00
1.00
Bore
9/16"
3/4"
1-1/16"
1-1/2"
2"
2-1/2"
3"
S
0.25
0.38
0.50
0.62
0.75
1.00
1.25
T
0.28
0.34
0.41
0.44
0.50
0.50
0.50
W
0.20
0.25
0.50
0.50
0.50
0.50
0.50
X
0.25
0.38
0.38
0.50
0.75
0.75
1.00
Z
0.86
0.85
1.00
1.50
1.60
1.48
1.88
AB
3.50
4.50
6.25
7.50
9.50
12.50
15.00
AC
1.25
1.50
2.12
2.75
3.50
4.25
5.50
AD
0.22
0.25
0.38
0.44
0.56
0.63
0.81
AE
1.00
1.25
2.00
2.50
4.00
4.50
6.00
AF
0.31
0.38
0.50
0.59
1.22
1.25
1.41
AG
0.38
0.50
1.00
1.31
1.56
2.00
3.19
AM
0.12
0.16
0.31
0.38
0.94
0.94
1.00
AN
0.75
0.94
1.38
1.75
2.12
2.63
4.00
AP
0.50
0.62
1.00
1.25
2.00
2.25
3.00
AQ
3.00
3.75
5.25
6.50
8.25
10.50
13.00
AR
1.75
2.12
3.12
4.00
5.00
6.25
8.00
AT
1.75
2.12
3.12
4.00
5.00
6.25
8.00
ZZ
N/A
10-32
1-4-20
3/8-16
3/8-16
1/2-13
3/4-16
R
0.62
0.88
1.12
1.31
1.50
1.75
2.06
AA
0.75
0.94
1.62
2.12
3.00
3.50
4.63
ACT-159
ACTUATORS
ACTUATORS
Technical Data:
Medium:
Filtered, lubricated or nonlubricated, compressed air
Operating Pressure
200 psig (13.6 Bar) Max.
Temperature Range:
Standard Nitrile seals:
-40F to 200F (-40C to 93C)
150F max. with Bumper
Option
High Temp seals:
-20F to 400F (-29C to
205C)
*With dew point of supply air less than air
temperature below 35F (2C).
Lubrication:
All F-Series Plus cylinders are
prelubricated at the time of
assembly with a Teflon based
grease, for non-lube service and
long life.
Side Loading:
Cylinders are specifically designed
to push and pull. Side loading and
misalignment of the piston rod
should be avoided to ensure
maximum operating performance
and life.
Materials:
Cylinder Body:
304 Stainless Steel
Head and Cap:
Clear Anodized Aluminum Alloy
Piston Rod:
303 Stainless Steel
Rod Bearing:
Oil Impregnated Bronze
Piston:
Aluminum Alloy
Rod & Piston seals:
Buna-N
ACT-160
Options selector
Substitute
FP
FPD
FPC
FPR
Bore
9/16"
3/4"
1-1/16"
1-1/2"
2"
2-1/2"
3"
4"
Substitute
056
075
106
150
200
250
300
400
Stroke
Increments of 1/8"
Mounting Options
Substitute
*Screw Clearance Holes Front
SCF
*Screw Clearance Holes Rear
SCR
*Screw Clearance Holes Both ends
SCB
Basic Model (std. c'bored mtg. holes)
BAM
**Front Trunnion
TMF
**Rear Trunnion
TMR
**Trunnion both ends
TMB
Pivot Mount
PTM
Threaded mounting holes Front
THF
Threaded mounting holes Rear
THC
Threaded mounting holes Both ends
THB
***Nose Mount
NMT
Options
Substitute
Bumper both ends (not avail. with HT)1 UB
Bumper Head (not avail. with HT)1
UH
Bumper Cap (not avail. with HT)1
UC
Non-Standard Female Thread*
FT(__)
Heavy Duty Rear End Cap
HD
Alternate Port Location
PL(__)
Low Friction Seals
LF
Magnetic Piston
PS
Switch Rail and Position
(switches ordered separately) M1,M2, M3,M4
No Rod Thread
PR
Non-Standard Male Thread
TM(__)
Thread Extension over standard
TX(__)
(specify additional length)3
Rod Extension over standard
RX(__)
(specify additional length)3
Stainless Steel Fasteners
SF
(125 PSI Max)
High Temperature Seals4
**HT
Rod Wiper
RW
1 Stroke is reduced by .03" per bumper.
this option.
3 Consult factory for negative thread or rod
extensions.
4 Not available in single or reverse acting
models.
* Not available in 9/16" bore.
4
1
Head/Cap:
Aluminum alloy, clear anodized for corrosion resistance.
Seals:
Buna N, o-ring seals throughout
Piston:
Aluminum alloy piston is lightweight, yet strong
with excellent wear characteristics.
Tube:
304 Stainless steel tube, polished and buffed I.D.
Rod Bearing:
Oil impregnated, bronze bearing, for long cylinder life
and non-lube service.
Piston Rod:
303 Stainless steel, chrome plated for smooth finish
and long seal life.
ACT-161
ACTUATORS
ACTUATORS
Code
Bore
Code
Base
9/16"
3/4"
1-1/16"
1-1/2"
2"
2-1/2"
3"
4"
(056)
(075)
(106)
(150)
(200)
(250)
(300)
(400)
0.075
0.119
0.306
0.600
0.813
1.400
1.806
3.481
0.006
0.013
0.069
0.113
0.169
0.194
0.219
0.369
Spring Forces
Bore
Code
9/16"
3/4"
1-1/16"
1-1/2"
2"
2-1/2"
3"
4"
(056)
(075)
(106)
(150)
(200)
(250)
(300)
(400)
Maximum
Force (lbs.)
5.25
10.00
11.50
13.00
13.00
25.00
25.00
25.00
0.12 to 1"
Stroke (lb/in)
4.25
6.00
6.00
5.50
5.50
6.50
6.50
6.50
Spring Rates
1.001 to 2"
2.001 to 3"
Stroke (lb/in)
Stroke (lb/in)
1.75
1.24
2.50
1.76
2.50
1.76
2.25
1.60
2.25
1.60
2.75
1.93
2.75
1.93
2.75
1.93
3.001 to 4"
Stroke (lb/in)
0.88
1.25
1.25
1.13
1.13
1.38
1.38
1.38
Code
9/16"
3/4"
1-1/16"
1-1/2"
2"
2-1/2"
3"
4"
(056)
(075)
(106)
(150)
(200)
(250)
(300)
(400)
Length Adder
(Add to standard cataloged length)
LF*
HD**
(Low Friction (Heavy Duty
PS (Magnetic Piston)
Seals)
Cap)
FP, FPD
FPR
FPC
0.25
0.13
0.88
0.63
0.38
0.25
0.13
0.88
0.88
0.88
0.38
0.19
0.88
0.88
0.88
0.38
0.19
0.88
0.88
0.88
0.38
0.19
0.88
0.88
0.88
0.38
0.25
0.88
0.88
0.88
0.50
0.25
0.88
0.88
0.88
0.50
0.38
0.88
0.88
0.88
*For Low Friction Seals used in combination with a magnetic piston, use the PS length adder only.
**For Heavy Duty End Cap used in combination with a magnetic piston, use both HD and PS length adders.
ACT-162
DD number of
clearance holes
for D socket head
cap screw
L port
(2 plc)
Port
position
F Rod
Dia.
1
E piston
rod thd
x G deep
0.13
J
CL
C
bolt circle
Ba + stroke
DD number of
clearance holes
for D socket head
cap screw
L port
(2 plc)
Port
position
F Rod
Dia.
F Rod
Dia.
0.13 + stroke
0.13
J
1
E piston
rod thd
x G deep
CL
C
bolt circle
Bb + stroke
Code
9/16"
3/4"
1-1/16"
1-1/2"
2"
2-1/2"
3"
4"
(056)
(075)
(106)
(150)
(200)
(250)
(300)
(400)
1.12
1.50
2.00
2.62
3.12
3.75
4.25
5.50
Ba*
(FP)
0.56
0.56
0.88
0.88
0.95
1.19
1.25
1.56
Bb*
(FPD)
0.69
0.69
0.94
1.00
1.06
1.31
1.38
1.69
C
0.88
1.22
1.69
2.19
2.69
3.25
3.78
4.94
DD
2
4
4
4
4
4
4
4
D
#4
#6
#6
#10
#10
1/4
1/4
5/16
E Thread
8-32 UNC
10-32 UNC
5/16-24 UNF
3/8-24 UNF
1/2-20 UNF
1/2-20 UNF
5/8-18 UNF
3/4-16 UNF
G depth
.46
.46
.70
.70
.70
.70
.73
.80
F
.25
.31
.50
.63
.75
.75
.88
1.00
H
.22
.25
.44
.50
.63
.63
.75
.88
J
.34
.34
.50
.50
.53
.66
.69
.84
K
.14
.14
.25
.25
.25
.33
.33
.42
L
10-32 UNF
10-32 UNF
1/8 NPT
1/8 NPT
1/8 NPT
1/4 NPT
1/4 NPT
3/8 NPT
ACT-163
ACTUATORS
ACTUATORS
DD number of
clearance holes
for D socket head
cap screw
L port
(2 plc)
Port
position
F Rod
Dia.
1
E piston
rod thd
x G deep
0.13
CL
C
bolt circle
J
Bc + stroke
DD number of
clearance holes
for D socket head
cap screw
L port
(2 plc)
F Rod
Dia.
Port
position
E piston
rod thd
x G deep
J
J
Bd + stroke
CL
C
bolt circle
DD
E Thread
G depth
0.88
1.22
1.69
2.19
2.69
3.25
3.78
4.94
2
4
4
4
4
4
4
4
#4
#6
#6
#10
#10
1/4
1/4
5/16
8-32 UNC
10-32 UNC
5/16-24 UNF
3/8-24 UNF
1/2-20 UNF
1/2-20 UNF
5/8-18 UNF
3/4-16 UNF
.46
.46
.70
.70
.70
.70
.73
.80
.25
.31
.50
.63
.75
.75
.88
1.00
.22
.25
.44
.50
.63
.63
.75
.88
.34
.34
.50
.50
.53
.66
.69
.84
0.13 +
stroke
Bore
9/16"
3/4"
1-1/16"
1-1/2"
2"
2-1/2"
3"
4"
Code
(056)
(075)
(106)
(150)
(200)
(250)
(300)
(400)
A
1.12
1.50
2.00
2.62
3.12
3.75
4.25
5.50
0-1"
Stk.
0.81
0.81
0.88
0.88
0.94
1.19
1.25
1.56
Bc* (FPR)
1.001-2" 2.001-3 3.001-4" 0-1"
Stk.
Stk.
Stk.
Stk.
1.38
1.96
2.52
1.06
1.38
1.94
2.50
1.06
1.50
2.13
2.75
1.38
1.50
2.13
2.75
1.38
1.56
2.19
2.81
1.44
2.06
2.94
3.81
1.94
2.12
3.00
3.88
2.00
2.44
3.31
4.19
2.31
Bd* (FPC)
1.001-2" 2.001-3" 3.001-4"
Stk.
Stk.
Stk.
1.62
2.14
2.70
1.62
2.19
2.75
2.00
2.63
3.25
2.00
2.63
3.25
2.06
2.69
N/A
2.81
2.81
N/A
2.88
2.88
N/A
3.19
3.19
N/A
ACT-164
Dimensions in inches
90
4-40
(2) places
90
45*
C
bolt circle
R thread
(4) places
0.88
bolt circle
* 43 for
3/4 bore only
Z radius
Y
U
AA
AB
AF
Nose Mount
Maximum Torque Recommendation
Bore
Code
Maximum Torque(ft-lb.)
9/16"
(056)
12
3/4"
(075)
28
1-1/16" (106)
100
1-1/2" (150)
120
2"
(200)
130
2-1/2" (250)
130
3"
(300)
130
4"
(400)
150
AE
AD
0.13
AC
Code
(056)
(075)
(106)
(150)
(200)
(250)
(300)
(400)
AA
0.06
0.06
0.13
0.13
0.19
0.25
0.25
0.19
AB
0.75 Hex
0.75 Hex
1.50 Hex
1.88 Hex
1.88 Hex
1.88 Hex
1.88 Hex
2.62 Hex
AC
0.38
0.38
0.75
0.75
0.88
1.00
1.00
1.12
AD
1/2-20 UNF-2A
5/8-18 UNF-2A
1-14 UNS-2A
1-1/4-12 UNF-2A
1-3/8-12 UNF-2A
1-3/8-12 UNF-2A
1-3/8-12 UNF-2A
1-3/4-12 UN-2A
AE
0.50
0.62
1.00
1.25
1.38
1.38
1.38
1.75
AF
0.31
0.25
0.55
0.52
0.52
0.52
0.52
0.88
C
0.88
1.22
1.69
2.19
2.69
3.25
3.78
4.94
M
N/A
0.31
0.50
0.50
0.50
0.63
0.63
0.75
N
N/A
0.12
0.25
0.25
0.25
0.31
0.31
0.38
P
N/A
0.17
0.25
0.25
0.25
0.33
0.33
0.42
Q
0.19
0.19
0.19
0.38
0.38
0.38
0.63
0.63
R
#4-40 UNC
#6-32 UNC
#6-32 UNC
#10-24 UNC
#10-24 UNC
1/4-20 UNC
1/4-20 UNC
5/16-18 UNC
S
0.38
0.38
0.38
0.75
0.75
0.75
1.00
1.00
T
0.19
0.19
0.25
0.25
0.31
0.38
0.38
0.44
U
0.25
0.25
0.25
0.44
0.44
0.44
0.56
0.56
W
0.75
0.75
0.81
1.19
1.25
1.31
1.69
1.75
X
0.17
0.23
0.25
0.34
0.34
0.41
0.41
0.50
Y
0.63
0.75
0.75
1.38
1.38
1.38
1.88
1.88
Z
0.19
0.19
0.19
0.38
0.38
0.38
0.38
0.38
ACT-165
ACTUATORS
ACTUATORS
WD
LG
0.19
Bore
9/16"
3/4"
1-1/16"
1-1/2"
2"
2-1/2"
3"
4"
Code
(056)
(075)
(106)
(150)
(200)
(250)
(300)
(400)
0.38
Bore
WD
0.56
0.69
0.88
1.00
1.13
1.13
1.25
1.38
9/16"
3/4"
1-1/16"
1-1/2"
2"
2-1/2"
3"
4"
Code
E
Fine
#8-32 UNC
#10-32 UNF
5/16-24 UNF
3/8-24 UNF
1/2-20 UNF
1/2-20 UNF
5/8-18 UNF
3/4-16 UNF
(056)
(075)
(106)
(150)
(200)
(250)
(300)
(400)
Course
N/A
#10-24 UNC
5/16-18 UNC
3/8-16 UNC
1/2-13 UNC
1/2-13 UNC
5/8-11 UNC
3/4-10 UNC
LG
0.38
0.38
0.50
0.50
0.63
0.63
0.75
0.75
Clevis Bracket
SQ
SD
S
TL
LD
SH diameter
thru
Q pin
dia.
MT
SQ
TH
Bore
Code
9/16"
3/4"
1-1/16"
1-1/2"
2"
2-1/2"
3"
4"
(056)
(075)
(106)
(150)
(200)
(250)
(300)
(400)
ACT-166
Part
Number
LD
MT
SH
SD
TH
TL
FCB-1
0.56
0.75
0.19
0.39
#6
1.00
0.16
0.78
FCB-2
0.94
1.38
0.38
0.75
#10
1.75
0.22
1.34
FCB-3
1.25
2.00
0.63
1.00
0.25
2.50
0.25
1.81
Code
3/4"
1-1/16"
1-1/2"
2"
2-1/2"
3"
4"
(075)
(106)
(150)
(200)
(250)
(300)
(400)
BT
dia thru
BA
BT
Part
Number
FTB-1
HT
LT
NA
NB
0.56
#10
0.63
1.12
0.31
0.13
0.30
0.22
FTB-2
0.81
0.25
0.88
1.50
0.50
0.25
0.38
0.31
FTB-3
0.94
0.31
1.00
1.63
0.63
0.31
0.45
0.38
FTB-4
1.06
0.38
1.25
1.88
0.75
0.38
0.55
0.44
Rod Clevis
Q
dia thru
E thrd
NT
S
LN
Bore
Code
9/16"
3/4"
1-1/16"
1-1/2"
2"
2-1/2"
3"
4"
(056)
(075)
(106)
(150)
(200)
(250)
(300)
(400)
MS
Part
Number
FRE-1
FRE-2
FRE-3
FRE-4
LN
MS
NT
#8-32 UNC
#10-32 UNF
5/16-24 UNF
3/8-24 UNF
0.38
0.38
0.63
0.63
0.47
0.47
0.47
0.75
0.25
0.25
0.25
0.44
0.19
0.19
0.19
0.38
0.38
0.38
0.38
0.75
FRE-5
1/2-20 UNF
0.75
0.75
0.44
0.38
0.75
FRE-6
FRE-7
5/8-18 UNF
3/4-16 UNF
0.88
0.88
1.00
1.00
0.63
0.63
0.63
0.63
1.00
1.00
ACT-167
ACTUATORS
ACTUATORS
Technical Data
Medium:
Filtered, lubricated or nonlubricated, compressed air
Maximum Operating
Pressure:
Options selector
FPT 106 x 1.750 - BAM - PS
Series
FPT F-Plus
Twin Rod Cylinder
Substitute
FPT
Lubrication:
All FPT cylinders are prelubricated during assembly with a
Teflon based grease for nonlube service and long life.
Bore
3/4"
1-1/16"
1-1/2"
2"
Substitute
075
106
150
200
Materials:
Cylinder Body:
304 Stainless Steel
Head and Cap:
Clear anodized aluminum
Tooling Plate:
Clear anodized aluminum
Piston Rods:
303 stainless steel
Rod Bearings:
Oil impregnated sintered
bronze
Piston:
Aluminum Alloy
Rod & Piston Seals:
Nitrile
Stroke
Increments of 1/16"
Options
Substitute
Counterbored Tool Plate
CTP
Viton / High Temp seals
HT
Switch rail and position
M1, M2, M3, M4
Magnetic Piston*
PS
Alternate port location
PL(__)
Rotated Pivot Mount
RM
(Pivot mount rotated 90 from standard)
Rotated Tooling Plate
RT
(Tooling plate and rod axis will be vertical
with respect to the ports)
Rod extension over std.
RX(_)
(Specify additional length)
Stainless Steel Fasteners
SF
(125 psi max)
*Magnetic option used in combination with viton (HT)
option is not reliable above 200F. Overall cylinder
length increases with magnetic option (see
dimensional tables).
Mounting Options
Substitute
Basic Mount
BAM
*Screw Clearance Holes Front
SCF
*Screw Clearance Holes Rear
SCR
*Screw Clearance Holes Both
SCB
Front Trunnion
TMF
Rear Trunnion
TMR
Trunnion Both Ends
TMB
Pivot Mount
PTM
Threaded Mounting Holes Front
THF
Threaded Mounting Holes Rear
THC
Threaded Mounting Holes Both Ends
THB
* Screw clearance to allow bolt head to
pass through - no counter bores
ACT-168
The Norgren FPT Series twin rod cylinder features a dual rod, compact design for non-rotating, space saving results. The
two piston rods are connected externally by an aluminum tooling plate, providing rod support and mounting flexibility.
6 Rod Seal: Lip-Type nitrile rod seal, pressure energized and wear
compensating.
1
2
5
6
3
4
ACT-169
ACTUATORS
ACTUATORS
B + Stroke
K2
C Bolt Circle
K1
4 Clearance for
D socket head
cap screw
L Port
VL
H VH
F Rod
Dia.
JJ
E thd.
(2x)
.07
N
Bore
3/4"
1-1/16"
1-1/2"
2"
Code
075
106
150
200
A
1.50
2.00
2.63
3.13
B*
0.94
1.31
1.31
1.38
C
1.22
1.69
2.19
2.69
D
#6
#6
#10
#10
E
#6-32 UNC
#8-32 UNC
1/4-20 UNC
5/16-18 UNC
Bore
3/4"
1-1/16"
1-1/2"
2"
Option
075
106
150
200
JJ
0.47
0.69
0.69
0.72
K1
0.14
0.25
0.25
0.25
K2
0.27
0.44
0.44
0.44
L
#10-32
1/8 NPT
1/8 NPT
1/8 NPT
V
0.38
0.38
0.50
0.63
F
0.19
0.25
0.38
0.50
H
0.332
0.422
0.562
0.750
VH
0.88
1.06
1.50
1.88
VL
1.25
1.44
2.00
2.50
J
0.34
0.50
0.50
0.53
Bore
3/4"
1-1/16"
1-1/2"
2"
Code
075
106
150
200
M
0.31
0.50
0.50
0.50
N
0.13
0.25
0.25
0.25
P
0.17
0.25
0.25
0.25
*
X
R
(4X)
C Bolt circle
Bore
3/4"
1-1/16"
1-1/2"
2"
Code
075
106
150
200
C
1.22
1.69
2.19
2.69
R
#6-32 UNC
#6-32 UNC
#10-24 UNC
#10-24 UNC
ACT-170
Bore
3/4"
1-1/16"
1-1/2"
2"
Code
075
106
150
200
X
0.23
0.25
0.34
0.34
Z Radius
EC for SHCS
(2X)
Q dia. for
Pivot pit
VH
VL
W
.07
Bore
3/4"
1-1/16"
1-1/2"
2"
Code
075
106
150
200
EC
#6
#8
1/4
5/16
V
0.38
0.38
0.50
0.63
VH
0.88
1.06
1.50
1.88
Bore
3/4"
1-1/16"
1-1/2"
2"
VL
1.25
1.44
2.00
2.50
Code
075
106
150
200
Q
0.19
0.19
0.38
0.38
S
0.38
0.38
0.75
0.75
T
0.19
0.25
0.25
0.31
U
0.25
0.25
0.44
0.44
Y
0.75
0.75
1.38
1.38
W
0.75
0.81
1.19
1.25
Z
0.19
0.19
0.38
0.38
Clevis bracket
SQ
SD
S
TL
LD
SH diameter
thru
LT
NB
Q pin
dia.
N
dia thru
HT
SQ
MT
NA
M
BT
dia thru
BA
TH
Bore
Code
Part
number
LD
MT
SH
SD
TH
TL
3/4"
1-1/16"
1-1/2"
2"
(075)
(106)
(150)
(200)
FCB-1
0.56
0.75
0.19
0.39
#6
1.00
0.16
0.78
FCB-2
0.94
1.38
0.38
0.75
#10
1.75
0.22
1.34
Repair Kits
Bore
Code
3/4"
1-1/16"
1-1/2"
2"
(075)
(106)
(150)
(200)
Bore
Code
3/4"
1-1/16"
1-1/2"
2"
(075)
(106)
(150)
(200)
Part
number
FTB-1
BA
BT
HT
LT
NA
NB
0.56
#10
0.63
1.12
0.31
0.13
0.30
0.22
FTB-2
0.81
0.25
0.88
1.50
0.50
0.25
0.38
0.31
Weights
Part
number
CKFPT-075
CKFPT-106
CKFPT-150
CKFPT-200
Bore
3/4"
1-1/16"
1-1/2"
2"
Code
(075)
(106)
(150)
(200)
ACT-171
ACTUATORS
ACTUATORS
Materials
Barrel & end caps: anodized
aluminum alloy
Piston rod: stainless steel
( 12 to 40 mm Austenitic,
50 and 63 mm Martensitic)
Seals: polyurethane and/or nitrile
rubber
Standard models
12
16
20
25
32
40
50
63
Piston
rod
6
8
10
12
16
16
20
20
Port
size
10-32
10-32
10-32
10-32
1/8 NPT
1/8 NPT
1/8 NPT
1/4 NPT
Magnetic, standard
Spring return
Spring extend
DC/91012/M/*
DC/93012/M/*
DC/91016/M/*
DC/93016/M/*
DC/91020/M/*
DC/93020/M/*
DC/91025/M/*
DC/93025/M/*
DC/91032/M/*
DC/93032/M/*
DC/91040/M/*
DC/93040/M/*
DC/91050/M/*
DC/93050/M/*
DC/91063/M/*
DC/93063/M/*
Magnetic, non-rotating
Spring return
Spring extend
RC/91016/N2/*
RC/93016/N2/*
RC/91020/N2/*
RC/93020/N2/*
RC/91025/N2/*
RC/93025/N2/*
RC/91032/N2/*
RC/93032/N2/*
RC/91040/N2/*
RC/93040/N2/*
RC/91050/N2/*
RC/93050/N2/*
RC/91063/N2/*
RC/93063/N2/*
Service kit
QM/92050/N2/00
QM/92063/N2/00
12
16
20
25
32
40
50
63
DC/91000/M
Theoretical forces lbs
(nm) at 87 psi (6 bar)
Outstroke
12.8 (57)
1.57 (7)
23.2 (103)
2.81 (12.5)
36.2 (161)
3.26 (14.5)
59.3 (264)
4.50 (20)
97.1 (432)
7.19 (32)
154.4 (687) 9.89 (44)
245.9 (1094) 12.70 (56.5)
397.9 (1770) 16.75 (74.5)
DC/93000/M
Theoretical forces lbs
(nm) at 87 psi (6 bar)
Instroke
9.0 (40)
1.57 (7)
16.2 (72)
2.81 (12.5)
26.8 (119)
3.26 (14.5)
44.3 (197)
4.50 (20)
70.0 (311)
7.19 (32)
127.3 (566) 9.89 (44)
203.7 (906) 12.70 (56.5)
355.6 (1582) 16.75 (74.5)
Options selector
Piston Rod
Substitute
Chrome plated stainless steel
D
Non-chrome plated stainless steel
R
(for N2 option only)
Cylinder
Substitute
NPT ports, inch threads & stroke
C
ISO G ports, metric threads & stroke M
Operating
Substitute
Single acting spring return
1
Single acting spring extend
3
Cylinder diameters (mm) Substitute
12
012
16
016
20
020
25
025
32
032
40
040
50
050
63
063
ACT-172
Service kit
QM/92050/00
QM/92063/00
DC/9///
Specify rod extension for MU option
Stroke length
(inch for NPT, mm for ISO G)
Bore
Max Stroke
1/2", 5/8"
3/8"
3/4", 1", 1-1/4", 1-1/2"
2"
2", 2-1/2"
12, 16 mm
10 mm
20, 25, 32, 40, 50, 63 mm 50 mm
Options
Magnetic piston
Rod extensions
Non-rotating piston rod
Substitute
M
MU
N2
DC/91000/M, DC/93000/M
Single acting
12 ... 63 mm
Mountings*
C Foot Bars
F Rod Clevis
Adapter**
12
16
20
25
32
40
50
63
QC/90012/22
QC/90016/22
QC/90020/22
QC/90025/22
QC/90032/22
QC/90040/22
QC/90050/22
QC/90063/22
QC/90012/21
QC/90016/21
QC/90020/21
QC/90025/21
QC/90032/21
QC/90040/21
QC/90050/21
QC/90063/21
RC-12
RC-16
RC-20
RC-25
RC-32
RC-32
RC-50
RC-63
C-76-36
C-76-37
C-76-225
C-76-03A
C-76-04A
C-76-04A
C-653-24-00J
C-653-04-00M
C-653-25-00P
C-653-08-01A
C-653-11-01A
C-653-11-01A
C-653-14-01E
C-653-16-01P
M/P71470/1
M/P71470/2
QC/92012/55
QC/92016/55
QC/92020/55
QC/92025/55
QC/92032/55
QC/92040/55
QC/92050/55
QC/92063/55
Standard cylinders
DC/91000/M (spring return)
ZJ + stroke + V
**
RT ***
PL
WH
TG2
PL
EE
ZJ + 2 x stroke + V
FF
WH + stroke
EE
PL
**
PL
TG1
JB
FB
MM h9
PF
MX
X
ZH + stroke + V
GB
BG
ZH + stroke + V
13
2,7
Z
KF
45
AF
ZJ 1 + stroke + V
MX 1
MX 1
ZH 1 + stroke + V
ZH 1 + stroke + V
12
16
20
25
32
40
50
63
AF
0.24 (6)
0.28 (7)
0.31 (8)
0.35 (9)
0.47 (12)
0.47 (12)
0.55 (14)
0.63 (16)
12
16
20
25
32
40
50
63
PL
0.28 (7)
0.30 (7.5)
0.30 (7.5)
0.31 (8)
0.35 (9)
0.39 (10)
0.41 (10.5)
0.51 (13)
BG
0.35 (9)
0.35 (9)
0.35 (9)
0.47 (12)
0.47 (12)
0.63 (16)
0.63 (16)
0.79 (20)
D
1.28 (32.5)
1.44 (36.5)
1.63 (41.5)
1.89 (48)
2.28 (58)
2.81 (71.5)
3.19 (81)
4.09 (104)
E
0.98 (25)
1.10 (28)
1.26 (32)
1.46 (37)
1.77 (45)
2.17 (55)
2.48 (63)
3.15 (80)
RT
8-32 (M4)
8-32 (M4)
8-32 (M4)
10-32 (M5)
10-32 (M5)
5/16-24 (M8)
5/16-24 (M8)
3/8-24 (M10)
TG 1
0.67 (17)
0.79 (20)
0.91 (23)
1.06 (27)
1.30 (33)
1.61 (41)
1.89 (48)
2.40 (61)
TG 2
0.51 (13)
0.79 (20)
0.91 (23)
1.06 (27)
1.30 (33)
1.61 (41)
1.89 (48)
2.40 (61)
EE
FB
FF
GB
JB
KF
MM (h9) MX (A/F) MX1 (A/F) PF
10-32
0.13 (3.3) 0.39 (10) 0.14 (3.5) 0.24 (6)
4-40 (M3)
0.24 (6)
0.20 (5)
0.59 (15)
10-32
0.13 (3.3) 0.39 (10) 0.14 (3.5) 0.24 (6)
8-32 (M4)
0.31 (8)
0.24 (6)
0.24 (6)
0.67 (17)
10-32
0.13 (3.3) 0.39 (10) 0.14 (3.5) 0.24 (6)
10-32 (M5)
0.39 (10)
0.31 (8)
0.31 (8)
0.77 (19.5)
10-32
0.17 (4.2) 0.39 (10) 0.18 (4.5) 0.30 (7.5) 1/4-28 (M6)
0.47 (12)
0.39 (10) 0.39 (10)
0.87 (22)
1/8 NPT 0.17 (4.2) 0.71 (18) 0.18 (4.5) 0.30 (7.5) 5/16-24 (M8) 0.63 (16)
0.51 (13) 0.51 (13)
1.08 (27.5)
1/8 NPT 0.27 (6.8) 0.71 (18) 0.26 (6.5) 0.41 (10.5) 5/16-24 (M8) 0.63 (16)
0.51 (13) 0.51 (13)
1.24 (31.5)
1/8 NPT 0.27 (6.8) 0.71 (18) 0.26 (6.5) 0.41 (10.5) 3/8-24 (M10) 0.79 (20)
0.67 (17) 0.63 (16)
1.46 (37)
1/4 NPT 0.33 (8.5) 0.87 (22) 0.33 (8.5) 0.53 (13.5) 7/16-20 (M12) 0.79 (20)
0.67 (17) 0.63 (16)
1.89 (48)
V (strokes)
lb (kg)
lb (kg)
0 ... 25 mm 26 ... 50 mm WH
ZH
ZH 1
ZJ
ZJ 1
0 mm
5 mm
0.55 (14)
0.18 (4.5)
0.94 (24)
1.12 (28.5)
0.15 (0.07) 0.04 (0.02)
0.59 (15)
0.22 (5.5)
0.96 (24.5) 1.36 (34.5) 1.18 (30) 1.57 (40)
0.20 (0.09) 0.04 (0.02)
0.67 (17)
1.34 (34)
0.24 (6)
1.02 (26)
1.42 (36)
1.26 (32) 1.65 (42)
0.26 (0.12) 0.04 (0.02)
0.71 (18)
1.42 (36)
0.26 (6.5)
1.12 (28.5) 1.52 (38.5) 1.38 (35) 1.77 (45)
0.37 (0.17) 0.07 (0.03)
0.75 (19)
1.50 (38)
0.26 (6.5)
1.14 (29)
1.54 (39)
1.40 (35.5) 1.79 (45.5) 0.62 (0.28) 0.11 (0.05)
0.79 (20)
1.57 (40)
0.26 (6.5)
1.24 (31.5) 1.63 (41.5) 1.50 (38) 1.89 (48)
0.97 (0.44) 0.13 (0.06)
1.18 (30)
2.36 (60)
0.31 (8)
1.38 (35)
1.77 (45)
1.69 (43) 2.09 (53)
1.10 (0.50) 0.18 (0.08)
1.18 (30)
2.36 (60)
0.31 (8)
1.67 (42.5) 2.07 (52.5) 2.00 (50.5) 2.38 (60.5) 1.98 (0.90) 0.24 (0.11)
ACT-173
ACTUATORS
ACTUATORS
Standard models
12
16
20
25
32
40
50
63
80
100
Piston
rod
6
8
10
12
16
16
20
20
25
25
Port
size
10-32
10-32
10-32
10-32
1/8 NPT
1/8 NPT
1/8 NPT
1/4 NPT
1/4 NPT
1/4 NPT
Magnetic
Standard
DC/92012/M/*
DC/92016/M/*
DC/92020/M/*
DC/92025/M/*
DC/92032/M/*
DC/92040/M/*
DC/92050/M/*
DC/92063/M/*
DC/92080/M/*
DC/92100/M/*
Magnetic
Guided
DC/92016/N4/*
DC/92020/N4/*
DC/92025/N4/*
DC/92032/N4/*
DC/92040/N4/*
DC/92050/N4/*
DC/92063/N4/*
DC/92080/N4/*
DC/92100/N4/*
Service kit
QM/92050/00
QM/92063/00
QM/92080/00
QM/92100/00
Magnetic
Non-rotating
DC/92016/N2/*
DC/92020/N2/*
DC/92025/N2/*
DC/92032/N2/*
DC/92040/N2/*
DC/92050/N2/*
DC/92063/N2/*
DC/92080/N2/*
DC/92100/N2/*
Service kit
QM/92050/N2/00
QM/92063/N2/00
QM/92080/N2/00
QM/92100/N2/00
Materials
Barrel & end caps: anodized
aluminum alloy
Piston rod: stainless steel
( 12 to 40 mm Austenitic,
50 to 100 mm Martensitic)
Seals: polyurethane and/or nitrile
rubber
Options selector
DC/92 / / /
Special variants #
Substitute
Heat resistant seals, 150C max.
T
# 32 to 100 mm bore.
Piston Rod
Substitute
Chrome plated stainless steel
D
Non-chrome plated stainless steel
R
(for N2 option only)
Cylinder
Substitute
NPT ports, inch threads & stroke
C
ISO G ports, metric threads & stroke M
Operating
Double acting
Substitute
2
ACT-174
Stroke length
(inch for NPT, mm for ISO G)
Bore
Max Stroke
1/2"
2"
5/8", 3/4", 1"
8"
1-1/4", 1-1/2"
10"
2", 2-1/2", 3-1/8", 4"
12"
12 mm
50 mmm
16, 20, 25 mm
200 mm
32, 40 mm
250 mm
50, 63, 80, 100 mm
300 mm
Options (magnetic piston)
Standard
Rod extensions
Non rotating piston rod
Guided piston rod
Double ended piston rod
Substitute
M
MU
N2
N4
JM
DC/92000/M
Double acting
12 ... 100 mm
Mountings*
B&G
12
16
20
25
32
40
50
63
80
100
QC/90012/22
QC/90016/22
QC/90020/22
QC/90025/22
QC/90032/22
QC/90040/22
QC/90050/22
QC/90063/22
QM/90080/22
QM/90100/22
QC/90012/21
QC/90016/21
QC/90020/21
QC/90025/21
QC/90032/21
QC/90040/21
QC/90050/21
QC/90063/21
QM/90080/21
QM/90100/21
Nut
Stud**
RC-12
RC-16
RC-20
RC-25
RC-32
RC-32
RC-50
RC-63
RC-80
RC-80
C-76-36
C-76-37
C-76-225
C-76-03A
C-76-04A
C-76-04A
C-76-05A
C-76-065A
C-76-12A
C-76-12A
Adapter**
C-653-24-00J
C-653-04-00M
C-653-25-00P
C-653-08-01A
C-653-11-01A
C-653-11-01A
C-653-14-01E
C-653-16-01P
C-653-18-01J
C-653-18-01J
M/P71470/1
M/P71470/2
M/P71470/3
M/P71470/3
Assembly kit
QC/92012/55
QC/92016/55
QC/92020/55
QC/92025/55
QC/92032/55
QC/92040/55
QC/92050/55
QC/92063/55
QM/92080/55
QM/92100/55
Standard cylinders
DC/92000/M
TG2
ZJ + stroke
PL
EE
PL
EE
FF
RT ***
WH
TG1
JB
FB
MM h9
PF
MX
X
GB
BG
ZH + stroke
KF
2,7
13
45
AF
12
16
20
25
32
40
50
63
80
100
12
16
20
25
32
40
50
63
80
100
AF
0.24 (6)
0.28 (7)
0.31 (8)
0.35 (9)
0.47 (12)
0.47 (12)
0.55 (14)
0.63 (16)
0.87 (22)
0.87 (22
MX1 (AF)
0.24 (6)
0.31 (8)
0.39 (10)
0.51 (13)
0.51 (13)
0.63 (16)
0.63 (16)
0.83 (21)
0.83 (21)
BG
0.35 (9)
0.35 (9)
0.35 (9)
0.47 (12)
0.47 (12)
0.63 (16)
0.63 (16)
0.79 (20)
0.79 (20)
0.98 (25)
PF
0.59 (15)
0.67 (17)
0.77 (19.5)
0.87 (22)
1.08 (27.5)
1.24 (31.5)
1.46 (37)
1.89 (48)
2.24 (57)
2.64 (67)
D
1.28 (32.5)
1.44 (36.5)
1.63 (41.5)
1.89 (48)
2.28 (58)
2.81 (71.5)
3.19 (81)
4.09 (104)
4.72 (120)
5.85 (148.5)
PL
0.28 (7)
0.30 (7.5)
0.30 (7.5)
0.31 (8)
0.35 (9)
0.39 (10)
0.41 (10.5)
0.51 (13)
0.57 (14.5)
0.63 (16)
E
0.98 (25)
1.10 (28)
1.26 (32)
1.46 (37)
1.77 (45)
2.17 (55)
2.48 (63)
3.15 (80)
3.70 (94)
4.59 (116.5)
RT
8-32 (M4)
8-32 (M4)
8-32 (M4)
10-32 (M5)
10-32 (M5)
5/16-24 (M8)
5/16-24 (M8)
3/8-24 (M10)
3/8-24 (M10)
7/16-20 (M12)
EE
10-32 (M5)
10-32 (M5)
10-32 (M5)
10-32 (M5)
1/8 NPT (G 1/8)
1/8 NPT (G 1/8)
1/8 NPT (G 1/8)
1/4 NPT (G 1/4)
1/4 NPT (G 1/4)
1/4 NPT (G 1/4)
TG1
0.67 (17)
0.79 (20)
0.91 (23)
1.06 (27)
1.30 (33)
1.61 (41)
1.89 (48)
2.40 (61)
2.87 (73)
3.56 (90.5)
FB
0.13 (3.3)
0.13 (3.3)
0.13 (3.3)
0.17 (4.2)
0.17 (4.2)
0.27 (6.8)
0.27 (6.8)
0.33 (8.5)
0.33 (8.5)
0.40 (10.2)
TG2
0.51 (13)
0.79 (20)
0.91 (23)
1.06 (27)
1.30 (33)
1.61 (41)
1.89 (48)
2.40 (61)
2.87 (73)
3.56 (90.5)
FF
0.39 (10)
0.39 (10)
0.39 (10)
0.39 (10)
0.71 (18)
0.71 (18)
0.71 (18)
0.87 (22)
0.87 (22)
0.87 (22)
WH
0.18 (4.5)
0.22 (5.5)
0.24 (6)
0.26 (6.5)
0.26 (6.5)
0.26 (6.5)
0.31 (8)
0.31 (8)
0.35 (9)
0.39 (10)
*** Only the 4 front holes are tapped on stroke lengths of less than:
25 and 32 mm: 5 mm, 40 and 63 mm: 15 mm (.../N2: 5 mm),
50 and 80 mm: 10 mm, 100 mm: 25 mm (.../N2: 15 mm).
Note: 12 to 20 mm feature only two side dovetails.
GB
0.14 (3.5)
0.14 (3.5)
0.14 (3.5)
0.18 (4.5)
0.18 (4.5)
0.26 (6.5)
0.26 (6.5)
0.33 (8.5)
0.33 (8.5)
0.41 (10.5)
ZH
0.94 (24)
0.96 (24.5)
1.02 (26)
1.12 (28.5)
1.14 (29)
1.24 (31.5)
1.38 (35)
1.67 (42.5)
1.85 (47)
1.91 (48.5)
JB
0.24 (6)
0.24 (6)
0.24 (6)
0.30 (7.5)
0.30 (7.5)
0.41 (10.5)
0.41 (10.5)
0.53 (13.5)
0.53 (13.5)
0.65 (16.5)
ZJ
1.12 (28.5)
1.18 (30)
1.26 (32)
1.38 (35 )
1.40 (35.5)
1.50 (38)
1.69 (43)
1.98 (50.5)
2.20 (56)
2.30 (58.5)
KF
4-40 (M3)
8-32 (M4)
10-32 (M5)
1/4-28 (M6)
5/16-24 (M8)
5/16-24 (M8)
3/8-24 (M10)
7/16-20 (M12)
1/2-20 (M16)
1/2-20 (M16)
lb (kg) 0 mm
0.13 (0.06)
0.18 (0.08)
0.22 (0.10)
0.33 (0.15)
0.55 (0.25)
0.84 (0.38)
0.99 (0.45)
1.81 (0.82)
2.65 (1.20)
4.03 (1.83)
MM (h9)
0.24 (6)
0.31 (8)
0.39 (10)
0.47 (12)
0.63 (16)
0.63 (16)
0.79 (20)
0.79 (20)
0.98 (25)
0.98 (25)
lb (kg) 25 mm
0.09 (0.04)
0.09 (0.04)
0.13 (0.06)
0.15 (0.07)
0.26 (0.12)
0.33 (0.15)
0.40 (0.18)
0.57 (0.26)
0.73 (0.33)
0.93 (0.42)
MX (AF)
0.20 (5)
0.24 (6)
0.31 (8)
0.39 (10)
0.51 (13)
0.51 (13)
0.67 (17)
0.67 (17)
0.87 (22)
0.87 (22)
Dimensions in inch (mm) Long Stroke versions (columns ZH and ZJ), > 2" (>50mm), incorporate a longer rod bearing which increases the overall body by .394" (10mm).
ACT-175
ACTUATORS
ZM + 2 x stroke
ZJ 1 + stroke
ZJ 2 + stroke
MX 1
ZH 1 + stroke
ZH 2 + stroke
16
20
25
32
40
50
63
80
100
ZH2
1.16 (29.5)
1.24 (31.5)
1.36 (34.5)
1.44 (36.5)
1.56 (39.5)
1.65 (42)
2.05 (52)
2.20 (56)
2.28 (58)
ZJ2
1.38 (35)
1.48 (37.5)
1.61 (41)
1.69 (43)
1.81 (46)
1.97 (50)
2.36 (60)
2.56 (65)
2.68 (68)
16
20
25
32
40
50
63
80
100
ZM
1.61 (41)
1.73 (44)
1.89 (48)
1.97 (50)
2.09 (53)
2.32 (59)
2.72 (69)
2.91 (74)
3.07 (78)
MX1 (A/F)
0.24 (6)
0.31 (8)
0.39 (10)
0.51 (13)
0.51 (13)
0.63 (16)
0.63 (16)
0.83 (21)
0.83 (21)
ZH1
1.36 (34.5)
1.42 (36)
1.50 (38)
1.54 (39)
1.63 (41.5)
1.77 (45)
2.07 (52.5)
2.24 (57)
2.30 (58.5)
ZJ1
1.57 (40)
1.65 (42)
1.77 (45)
1.79 (45.5)
1.89 (48)
2.09 (53)
2.38 (60.5)
2.60 (66)
2.70 (68.5)
GB
PL
PL
JB
BG
FB
Z
H
PF
TT
13
2,7
WH
RT
FF
16
20
25
32
40
50
63
80
100
45
TG
HF
Z
BG
0.35 (9)
0.35 (9)
0.47 (12)
0.47 (12)
0.63 (16)
0.63 (16)
0.79 (20)
0.79 (20)
0.98 (25)
ZH + stroke
EE
FB
FF
GB
HF
JB
PF
PL
RT
TG
TT
WH
0.83 (21)
0.98 (25)
1.16 (29.5)
1.50 (38)
1.83 (46.5)
2.22 (56.5)
2.80 (71)
3.50 (89)
4.33 (110)
1.44 (36.5)
1.63 (41.5)
1.89 (48)
2.28 (58)
2.81 (71.5)
3.19 (81)
4.09 (104)
4.72 (120)
5.85 (148.5)
1.10 (28)
1.26 (32)
1.46 (37)
1.77 (45)
2.17 (55)
2.48 (63)
3.15 (80)
3.70 (94)
4.59 (116.5)
10-32 (M5)
10-32 (M5)
10-32 (M5)
1/8 NPT (G1/8)
1/8 NPT (G1/8)
1/8 NPT (G1/8)
1/4 NPT (G1/4)
1/4 NPT (G1/4)
1/4 NPT (G1/4)
0.13 (3.3)
0.13 (3.3)
0.17 (4.2)
0.17 (4.2)
0.27 (6.8)
0.27 (6.8)
0.33 (8.5)
0.33 (8.5)
0.40 (10.2)
0.39 (10)
0.39 (10)
0.39 (10)
0.71 (18)
0.71 (18)
0.71 (18)
0.87 (22)
0.87 (22)
0.87 (22)
0.14 (3.5)
0.14 (3.5)
0.18 (4.5)
0.18 (4.5)
0.26 (6.5)
0.26 (6.5)
0.33 (8.5)
0.33 (8.5)
0.41 (10.5)
1.02 (26.5)
1.18 (30)
1.38 (35)
1.69 (43)
2.05 (52)
2.36 (60)
2.99 (76)
3.54 (90)
4.45 (113)
0.24 (6)
0.31 (8)
0.31 (8)
0.39 (10)
0.39 (10)
0.47 (12)
0.47 (12)
0.63 (16)
0.79 (20)
0.24 (6)
0.24 (6)
0.30 (7.5)
0.30 (7.5)
0.41 (10.5)
0.41 (10.5)
0.53 (13.5)
0.53 (13.5)
0.65 (16.5)
0.67 (17)
0.77 (19.5)
0.87 (22)
1.08 (27.5)
1.24 (31.5)
1.46 (37)
1.89 (48)
2.24 (57)
2.64 (67)
0.30 (7.5)
0.30 (7.5)
0.31 (8)
0.35 (9)
0.39 (10)
0.41 (10.5)
0.51 (13)
0.57 (14.5)
0.63 (16)
8-32 (M4)
8-32 (M4)
10-32 (M5)
10-32 (M5)
5/16-24 (M8)
5/16-24 (M8)
3/8-24 (M10)
3/8-24 (M10)
7/16-20 (M12)
0.79 (20)
0.91 (23)
1.06 (27)
1.30 (33)
1.61 (41)
1.89 (48)
2.40 (61)
2.87 (73)
3.56 (90.5)
4-40 (M3)
4-40 (M3)
8-32 (M4)
8-32 (M4)
10-32 (M5)
1/4-28 (M6)
5/16-24 (M8)
3/8-24 (M10)
7/16-20 (M12)
0.45 (11.5)
0.55 (14)
0.57 (14.5)
0.65 (16.5)
0.65 (16.5)
0.79 (20)
0.79(20)
0.98 (25)
1.18 (30)
ZH
ZJ
0.96 (24.5)
1.02 (26)
1.12 (28.5)
1.14 (29)
1.24 (31.5)
1.38 (35)
1.67 (42.5)
1.85 (47)
1.91 (48.5)
Dimensions in inch (mm) Long Stroke versions (columns ZH and ZJ), > 2" (>50mm), incorporate a longer rod bearing which increases the overall body by .394" (10mm).
NOTE: 16 mm bore maximum stroke = 2", 20
mm and 25 mm maximum stroke = 3"
32 mm to 100 mm maximum stroke = 4"
External non-rotating guidance DC/92000/N4 inch, DM/92000/N4 metric Permissible load and torque
22 4''
20
90
18
80
100
100
100
4''
6
16
70
31/8''
14 21/2''
12
4
5
80
60 63
2''
50 50
31/8''
11/2''
40 40
11/4''
30 32
4
80
8
F = Side Load (N)
6 1''
3/4''
4 5/8''
2
0.5
1.0
1.5
Stroke Length (inches)
2.0
ACT-176
2.5
3.0
25
20 20
16
10
10 20
30 40
Stroke Length (mm)
50
60
70
80
3
M = Torque Loading (Nm)
10
F = Side Load (lbs.Force)
ACTUATORS
21/2''
1 2''
11/2''
11/4''
1''
3/4''
5/8''
0.5
1.0 1.5 2.0
Stroke Length (inches)
2.5
3.0
3.5
63
50
40
1 32
25
20
16
10 20 30 40
Stroke Length (mm)
50
60
70
80 90
1.42 (36)
1.57 (40)
1.69 (43)
1.79 (45.5)
1.89 (48)
2.17 (55)
2.46 (62.5)
2.83 (72)
3.09 (78.5)
Foot C
QC/900**/21 (inch)
QM/900**/21 (metric)
E
R
MF
AH
AT
TF
UF
DG
AO
AB
DB
TR
UL
FB
12
16
20
25
32
40
50
63
80
100
E
1.02 (26)
1.18 (30)
1.30 (33)
1.50 (38)
1.81 (46)
2.24 (57)
2.52 (64)
3.19 (81)
3.74 (95)
4.65 (118)
R
0.71 (18)
0.87 (22)
0.98 (25)
1.10 (28)
1.42 (36)
1.69 (43)
1.97 (50)
2.48 (63)
3.03 (77)
3.86 (98)
FB
0.14 (4)
0.14 (4)
0.14 (4)
0.18 (5)
0.18 (5)
0.26 (7)
0.26 (7)
0.33 (9)
0.33 (9)
0.43 (11)
MF
0.20 (5)
0.20 (5)
0.20 (5)
0.26 (7)
0.26 (7)
0.37 (10)
0.37 (10)
0.49 (13)
0.49 (13)
0.49 (13)
TF
1.50 (38)
1.65 (42)
1.89 (48)
2.13 (54)
2.60 (66)
3.07 (78)
3.54 (90)
4.33 (110)
5.04 (128)
6.14 (156)
UF
1.81 (46)
1.97 (50)
2.20 (56)
2.52 (64)
2.99 (76)
3.62 (92)
4.09 (104)
5.04 (128)
5.75 (146)
6.93 (176)
lb (kg)
0.04 (0.02)
0.04 (0.02)
0.04 (0.02)
0.09 (0.04)
0.13 (0.06)
0.33 (0.15)
0.37 (0.17)
0.73 (0.33)
0.90 (0.41)
1.59 (0.72)
12
16
20
25
32
40
50
63
80
100
AB
0.13 (3)
0.13 (3)
0.13 (3)
0.17 (4)
0.17 (4)
0.25 (6)
0.25 (6)
0.33 (8)
0.33 (8)
0.41 (11)
AH
0.53 (14)
0.59 (15)
0.65 (17)
0.79 (20)
0.91 (23)
1.12 (29)
1.26 (32)
1.63 (42)
1.93 (49)
2.34 (60)
AO
0.16 (4)
0.16 (4)
0.16 (4)
0.20 (5)
0.20 (5)
0.26 (7)
0.26 (7)
0.31 (8)
0.31 (8)
0.35 (9)
12
16
20
25
32
40
50
63
80
100
CE
A
KW
RK
CL
CM B12
KV
TR
0.98 (25)
1.26 (32)
1.38 (35)
1.61 (41)
0.75 (19)
0.83 (21)
1.06 (27)
1.34 (34)
1.73 (44)
2.20 (56)
DB
0.24 (6)
0.24 (6)
0.24 (6)
0.30 (8)
0.30 (8)
0.41 (11)
0.41 (11)
0.53 (14)
0.53 (14)
0.65 (17)
UL
1.30 (33)
1.57 (43)
1.69 (43)
2.01 (51)
1.81 (46)
2.20 (56)
2.52 (64)
3.19 (81)
3.74 (95)
4.65 (118)
DG
0.14 (4)
0.14 (4)
0.14 (4)
0.18 (5)
0.18 (5)
0.26 (7)
0.26 (7)
0.33 (9)
0.33 (9)
0.41 (11)
lb (kg)
0.04 (0.02)
0.04 (0.02)
0.04 (0.02)
0.09 (0.04)
0.09 (0.04)
0.22 (0.10)
0.24 (0.11)
0.29 (0.13)
0.40 (0.18)
1.06 (0.48)
1/2" (12)
5/8" (16)
3/4" (20)
RC-12
RC-16
RC-20
QM/57008/25
QM/8010/25
QM/92020/25
C-653-24-00J
C-653-04-00M
C-653-05-00P
M/P1710/18
M/P1710/19
M/P1710/20
C-76-36
C-76-37
C-76-225
M/P1500/111
M/P1501/80
M/P1501/109
B
CE
CK h11
CL
0.43 (11)
0.12 (3)h9
0.24 (6)
0.63 (16)
0.16 (4)
0.31 (8)
0.79 (20)
0.20 (5)
0.39 (10)
0.79 (20)
0.20 (5)
0.39 (10)
0.94 (24)
0.24 (6)
0.47 (12)
0.47 (12) 1.31 (33)
0.31 (8)
0.55 (14)
0.59 (15) 1.57 (40)
0.39 (10)
0.79 (20)
0.79 (20) 2.20 (56)
0.55 (14)
1.06 (27)
CK h11
CL
ER
Bore
Clevis Inch
Metric
Stud Inch
Metric
Nut Inch
Metric
Adaptor (mm)
Bore A
12
12
16
16
20
20
25
25
32 & 40 25
50
29
63
35
80 &100 45
H
0.08 (2)
0.08 (2)
0.08 (2)
0.12 (3)
0.12 (3)
0.18 (5)
0.18 (5)
0.22 (6)
0.22 (6)
0.26 (7)
KK
KF
LE
AT
0.37 (10)
0.37 (10)
0.37 (10)
0.49 (13)
0.49 (13)
0.63 (16)
0.63 (16)
0.87 (22)
1.00 (26)
1.12 (29)
1" (25)
RC-25
QM/57016/25
C-653-08-01A
M/P1710/21
C-76-03A
M/P1501/79
CM B12
0.12 (3)
0.16 (4)
0.20 (5)
0.20 (5)
0.24 (6)
0.28 (7)
0.39 (10)
0.55 (14)
1-1/4" (32)
RC-32
QM/57020/25
C-653-11-01A
M/P1710/22
C-76-04A
M/P1501/60
ER
0.18 (4.5)
0.25 (6.5)
0.31 (8)
0.31 (8)
0.37 (9.5)
0.45 (11.5)
0.63 (16)
0.83 (21)
1-1/2" (40)
2" (50)
RC-32
RC-50
QM/57020/25 QM/57025/25
C-653-11-01A C-653-14-01E
M/P1710/22
C-76-04A
C-76-05A
M/P1501/60
M/P71470/1
KF
KK
KV (A/F)
M3
M3
0.24 (6)
M4
M4
0.28 (7)
M5
M5
0.31 (8)
M6
M6
0.39 (10)
M8
M8
0.51 (13)
M10
M10x1.25 0.47 (12)
M12
M12x1.25 0.51 (13)
M16
M16x1.5
0.67 (17)
2-1/2" (63)
RC-63
QM/57040/25
C-653-16-01P
C-76-065A
M/P71470/2
KW
0.08 (2)
0.08 (2
0.98 (2.5)
0.12 (3)
0.16 (4)
0.20 (5)
0.20 (5)
0.20 (5)
3-1/8" (80)
RC-80
QM/57063/25
C-653-18-01J
C-76-12A
M/P71470/3
LE
0.20 (5)
0.31 (8)
0.39 (10)
0.39 (10)
0.47 (12)
0.47 (12)
0.79 (20)
1.10 (28)
4" (100)
RC-80
QM/57063/25
C-653-18-01J
C-76-12A
M/P71470/3
RK
0.39 (10)
0.45 (11.5)
0.57 (14.5)
0.57 (14.5)
0.69 (17.5)
0.81 (20.5)
1.14 (29)
1.44 (36.5)
Bore
12
16
20
25
32
40
50
63
80
100
L
.39
.39
.39
.39
.39
.59
.59
.79
.79
.79
(10)
(10)
(10)
(10)
(10)
(15)
(15)
(20)
(20)
(25)
ACT-177
ACTUATORS
ACTUATORS
Output
Switch Open
ACT-178
Sensor
Sensor
V=0
Switch Closed
Output
V<>0
Supply
S
Magnet
Supply
LS Series Thrusters
M/NEN/A
M/NEN/N
SS Series NFPA
N Series
Lintra Plus
(T,VT,ET,TA,TAV,TAE)
M/50*
Lintra Lite
ISO/VDMA (DA/8000)
ISO/VDMA (PDA/182000)
Rotary Actuators
Roundline Plus
RPHD Magnetic
RPD Delrin
RT Thrusters
F-Series Plus
M/50*
TM/50*
ACT-179
ACTUATORS
ACTUATORS
*Switch P/N
CS8-2-04
Bore
3/4" - 2-1/2"
Function
Switching
Voltage
Switching
Current
Switching
Power
SPST
Normally
Open
5-120
VDC/VAC
50/60 Hz
.5 Amp max.
.005 Amp min.
10 VA
5-120
VDC/VAC
50/60 Hz
.5 Amp max.
.005 Amp min.
10 VA
Type
Reed
CS8-2-04P
3/4" - 2-1/2"
Reed
SPST
Normally
Open
CS8-2-31
3/4" - 2-1/2"
Solid State
Light,
Sourcing PNP
Normally
Open
6-24 VDC
.5 Amp max.
12 Watts max.
Solid State
Light,
Sourcing PNP
Normally
Open
6-24 VDC
.5 Amp max.
12 Watts max.
Solid State
Light,
Sinking NPN
Normally
Open
6-24 VDC
.5 Amp max.
12 Watts max.
Solid State
Light,
Sinking NPN
Normally
Open
6-24 VDC
.5 Amp max.
12 Watts max.
Normally
Open
5-240
VDC/VAC
50/60 Hz
1 Amp max.
30 Watts max.
Normally
Open
5-240
VDC/VAC
50/60 Hz
1 Amp max.
30 Watts max.
Normally
Open
5-240
VDC/VAC
50/60 Hz
1 Amp max.
30 Watts max.
1 Amp max.
30 Watts max.
CS8-2-31P
CS8-2-32
CS8-2-32P
CS7-04
CS7-04-12P
CS7-9-04
3/4" - 2-1/2"
3/4" - 2-1/2"
3/4" - 2-1/2"
2" - 6"
2" - 6"
7" - 8"
Reed
Reed
Reed
CS7-10-04
10"-12"
Reed
Normally
Open
5-240
VDC/VAC
50/60 Hz
CS7-31
2" - 6"
Solid State
Light, Sourcing
PNP
Normally
Open
6-24 VDC
1 Amp max.
24 Watts max
Normally
Open
6-24 VDC
1 Amp max.
24 Watts max
CS7-31P
2" - 6"
Solid State
Light, Sourcing
PNP
CS7-9-31
7" - 8"
Solid State
Light, Sourcing
PNP
Normally
Open
6-24 VDC
1 Amp max.
24 Watts max
Solid State
Light,
Sinking NPN
Normally
Open
6-24 VDC
1 Amp max.
24 Watts max.
Normally
Open
6-24 VDC
1 Amp max.
24 Watts max.
6-24 VDC
1 Amp max.
24 Watts max.
CS7-32
2" - 6"
CS7-32P
2" - 6"
Solid State
Light,
Sinking NPN
CS7-9-32
7" - 8"
Solid State
Light,
Sinking NPN
Normally
Open
Normally
Open
Normally
Open
CS7-24
2" - 6"
Reed
CS7-9-24
7" - 8"
Reed
CS9-04
2" - 8"
Reed
Normally
Open
0-120
VAC/VDC
50/60 Hz
0.5 Amp Ma
CS8-2 Series
1.263
.53
.698
.425
1.078
ACT-180
10 Watts max.
Enclosure
Classification
Temperature Rating
Plug-In Cable
3.5 Volts
-22 F to + 176 F
9 Feet
N/A
Wiring Diagrams
Hard Wired
WHT
_
Supply
120V Max
BRN
3.5 Volts
-22 F to + 176 F
8 mm Plug-in
CS8-PIC-2 (2m)
CS8-PIC-5 (5m)
.5 Volts
-22 F to + 176 F
9 Feet
N/A
BRN
+
WHT
Supply
6-24 VDC
GRN
.5 Volts
.5 Volts
0.45
Load
-22 F to + 176 F
8mm plug-in
WHT
-22 F to + 176 F
9 Feet
N/A
.5 Volts
-22 F to + 176 F
8mm plug-in
CS8-PIC-2 (2m)
CS8-PIC-5 (5m)
3 Volts
-22 F to + 176 F
9 Feet
N/A
3 Volts
-22 F to + 176 F
12 mm plug-in
CS7-PIC-5 (5m)
CS7-PIC-10 (10m)
BRN
Supply
6-24 VDC
GRN
-22 F to + 176 F
9 Feet
N/A
3 Volts
-22 F to + 176 F
9 Feet
N/A
.5 Volts
-22 F to + 176 F
9 Feet
N/A
.5 Volts
-22 F to + 176 F
12mm plug-in
CS7-PIC-5 (5m)
CS7-PIC-10 (10m)
.5 Volts
-22 F to + 176 F
9 Feet
N/A
.5 Volts
-22 F to + 176 F
9 Feet
N/A
.5 Volts
-22 F to + 176 F
12mm plug-in
CS7-PIC-5 (5m)
CS7-PIC-10 (10m)
.5 Volts
-22 F to + 176 F
9 Feet
N/A
N/A
-22 F to + 176 F
9 Feet
N/A
N/A
RED
Load
+
_
0.10
Load
Supply
AC/DC
3 Volts
0.10
Load
CS8-PIC-2 (2m)
CS8-PIC-5 (5m)
BLK
RED
BLK
Supply
6-24 VDC
WHT
Load
BLK
_
Supply
AC/DC
+
AC
supply
RED
WHT
Load
BLK
WHT
Load
-22 F to + 176 F
9 Feet
RED
N/A
SWITCH
RED
+ ~
HOT
- ~
BLK
NEUTRAL
GRN
N/A
CS7 Series
GROUND
-4 F to +176 F
9 Feet
N/A
1.28
Indicator
light
.86
Hook up
cable
.68
1.66
.68
1.27
.327
.85
1.40
ACT-181
ACTUATORS
ACTUATORS
Switch P/N
Bore
Type
M/NEN/A
1-1/2" - 4"
Reed
Solid State
M/NEN/N
1-1/2" - 4"
Function
Switching
Voltage
Switching Current
Switching
Power
Light,
(Green LED)
Normally Open
5-240 VDC/VAC
100mA max.
10 Watts max.
Light,
Sinking NPN
(Red LED)
Normally Open
5-30 VDC
200mA max.
6 Watts max.
Function
Switching
Voltage
Switching Current
Switching
Power
Switch P/N
Bore
Type
CS8-04
7/16" - 3"
Reed
5-120 VDC/VAC
50/60 Hz
.5 Amp max.
.005 Amp min.
10 VA
CS8-04P
7/16" - 3"
Reed
5-120 VDC/VAC
50/60 Hz
.5 Amp max.
.005 Amp min.
10 VA
CS8-31
7/16" - 3"
Solid State
Light,
Sourcing PNP
Normally Open
6-24 VDC
.5 Amp max.
12 Watts max.
CS8-31P
7/16" - 3"
Solid State
Light,
Sourcing PNP
Normally Open
6-24 VDC
.5 Amp max.
12 Watts max.
CS8-32
7/16" - 3"
Solid State
Light,
Sinking NPN
Normally Open
6-24 VDC
.5 Amp max.
12 Watts max.
CS8-32P
7/16" - 3"
Solid State
Light,
Sinking NPN
Normally Open
6-24 VDC
.5 Amp max.
12 Watts max.
Function
Switching
Voltage
Switching Current
Switching
Power
5-120 VDC/VAC
50/60 Hz
4 Watts max.
5-120 VDC/VAC
50/60 Hz
4 Watts max.
Normally Open
5-28 VDC
.2 Amp max.
Bore
Type
CS9D-0-02
5/16" - 4"
Reed
CS9D-3-02
5/16" - 4"
Reed
CS9D-0-31
5/16" - 4"
Solid State
8mm quick
disconnect w/ LED
PNP
w/ LED
Normally Open
5-28 VDC
.2 Amp max.
CS9D-3-31
5/16" - 4"
Solid State
PNP
8mm quick
disconnect w/ LED
CS9D-0-32
5/16" - 4"
Solid State
NPN
w/ LED
Normally Open
5-28 VDC
.2 Amp max.
Solid State
NPN
8mm quick
disconnect w/ LED
Normally Open
5-28 VDC
.2 Amp max.
CS9D-3-32
ACT-182
LED
5/16" - 4"
Temperature
Rating
Lead Wire
Length
Mounting Bracket
Wiring Diagrams
BRN
IP 67
(NEMA 6)
1-1/2" bore
QM/NEN1/SB
2"-2-1/2" bore
QM/NEN2/SB
Load
POWER
BLU
14 F to 158 F
2 meters
IP 67
(NEMA 6)
14 F to 158 F
2 meters
3-1/4"-4" bore
Main Circuit
BRN
.5 volts max.
+
~
0.47
(12)
Max Voltage
Drop
QM/NEN3/SB
BLK
0.24
(6)
+
~
Load
BLU
Enclosure
Classification
Temperature
Rating
Lead Wire
Length
78.74
(2000)
0.06
(1.5)
Power
0.24
(6)
1.02
(26)
Plug-In Cable
WHT
-22 F to + 176 F
9 Feet
N/A
BRN
NEMA 6
-22 F to + 176 F
8 mm plug-in
CS8-PIC-2 (2m)
CS8-PIC-5 (5m)
BRN
.5 Volts
NEMA 6
-22 F to + 176 F
9 Feet
N/A
WHT
SUPPLY
6-24 VDC
GRN
NEMA 6
-22 F to + 176 F
8 mm plug-in
CS8-PIC-2 (2m)
CS8-PIC-5 (5m)
CS8-31 (Source)
WHT
.5 Volts
NEMA 6
-22 F to + 176 F
9 Feet
N/A
BRN
SUPPLY
6-24 VDC
GRN
.5 Volts
NEMA 6
-22 F to + 176 F
8 mm plug-in
0.10
1.00 (25)
CS8-PIC-2 (2m)
CS8-PIC-5 (5m)
0.10
Center of Sensing Area
LOAD
.35
(9)
.5 Volts
.53 (13)
CS8-04
.37
(9)
3.5 Volts
0.45
Center of Sensing Area
LOAD
.92 (23)
NEMA 6
.40
(10)
3.5 Volts
SUPPLY
120V MAX
CS8-32 (Sink)
Max Voltage
Drop
Enclosure
Classification
Temperature
Rating
3.5 Volts
NEMA 6
-20 F to + 80F
3.5 Volts
NEMA 6
-20 F to + 80F
NEMA 6
-20 F to + 80F
Lead Wire
Length
Plug-In Cable
Wiring Diagrams
Hard Wired
N/A
CS00-00-02 (2m)
8 mm plug-in CS00-00-05 (5m)
N/A
NEMA 6
-20 F to + 80F
CS00-00-02 (2m)
8 mm plug-in CS00-00-05 (5m)
NEMA 6
-20 F to + 80F
NEMA 6
-20 F to + 80F
N/A
CS00-00-02 (2m)
8 mm plug-in CS00-00-05 (5m)
ACT-183
ACTUATORS
ACTUATORS
Wire Connection
Function
Voltage
Switching
Current
Sinking (NPN)
LED
3 Wire
Normally Open
10-30 VDC
150 mA
Solid State
Sinking (NPN)
LED
3 Wire
Normally Open
10-30 VDC
150 mA
PVC
Solid State
Sourcing (PNP)
LED
3 Wire
Normally Open
10-30 VDC
150 mA
M/50/EAP/CC
Plug in
Solid State
Sourcing (PNP)
LED
3 Wire
Normally Open
10-30 VDC
150 mA
M/50/EAP/CP
Plug in
Solid State
Sourcing (PNP)
LED
3 Wire
Normally Open
10-30 VDC
150 mA
Sourcing (PNP)
Solid State
LED
3 Wire
Normally Open
10-30 VDC
150 mA
Switch P/N
Cable Material
Type
M/50/EAN/*V
PVC
Solid State
M/50/EAN/CP
Plug in
M/50/EAP/*V
IP-66
M/50/EXP/5V
(ATEX)
PVC
M/50/LSU/*V
PVC
Reed
LED
2 Wire
Normally Open
M/50/LSU/5U
Polyurethane
Reed
LED
2 Wire
Normally Open
10-240 VAC
10-170 VDC
10-240 VAC
10-170 VDC
M/50/LSU/CC
Plug in
Reed
LED
2 Wire
Normally Open
10-240 VAC
10-170 VDC
180 mA
M/50/LSU/CP
Plug in
Reed
LED
2 Wire
Normally Open
10-60 VAC
10-75 VDC
180 mA
M/50/LXU/5V
(ATEX)
M/50/RAC/5V
(changeover)
TM/50/RAU/*S
(high temp.)
PVC
Reed
LED
2 Wire
Normally Open
PVC
Reed
3 Wire
Changeover
10-240 VAC
10-170 VDC
10-240 VAC
10-170 VDC
Normally Open
10-240 VAC
10-170 VDC
Silicone
Reed
2 Wire
The M/50 switch is supplied with an adaptor which will allow it to be used in place of QM/33, QM/34, and QM/134.
ACT-184
M/P72487
180 mA
180 mA
180 mA
180 mA
180 mA
M/50* Switches
Switching
Power
Contact
Resistance
Operating
Temperature
Protection
Rating
4.5 W
N/A
-20 C to +80 C
IP67
(DIN 40050)
4.5 W
N/A
-20 C to +80 C
IP67
(DIN 40050)
4.5 W
N/A
-20 C to +80 C
IP67
(DIN 40050)
4.5 W
N/A
-20 C to +80 C
IP67
(DIN 40050)
IP67
(DIN 40050)
IP67
(DIN 40050)
4.5 W
N/A
-20 C to +80 C
4.5 W
N/A
-20 C to +50 C
10 W
150m Ohm
-20 C to +80 C
10 W
150m Ohm
-20 C to +80 C
IP66
(DIN 40050)
IP66
(DIN 40050)
10 W
150m Ohm
-20 C to +80 C
IP66
(DIN 40050)
10 W
150m Ohm
-20 C to +80 C
IP66
(DIN 40050)
10 W
150m Ohm
-20 C to +80 C
10 W
150m Ohm
-20 C to +80 C
10 W
IP66
150m Ohm -20 C to +150 C (DIN 40050)
IP67
(DIN 40050)
IP66
(DIN 40050)
Cable Length
*Insert 2 = 2 Meters
*Insert 5 = 5 Meters
*Insert 10 = 10 Meters
0.3 Meters
with M8 x 1
Cable Plug
*Insert 2 = 2 Meters
*Insert 5 = 5 Meters
*Insert 10 = 10 Meters
0.3 Meters
with M12 x 1
Cable Plug
Plug-in Cable
N/A
M/P73001/5 (PVC)
M/P73002/5 (PUR)
(5 meters)
N/A
M/P34614/5 (PVC)
M/P34595/5 (PUR)
(5 meters)
0.3 Meters
with M8 x 1
Cable Plug
M/P73001/5 (PVC)
M/P73002/5 (PUR)
(5 meters)
5 Meters
*Insert 2 = 2 Meters
*Insert 5 = 5 Meters
*Insert 10 = 10 Meters
N/A
5 Meters
0.3 Meters
with M12 x 1
Cable Plug
0.3 Meters
with M8 x 1
Cable Plug
N/A
M/P34614/5 (PVC)
M/P34595/5 (PUR)
(5 meters)
M/P73001/5 (PVC)
M/P73002/5 (PUR)
(5 meters)
5 Meters
N/A
5 Meters
N/A
*Insert 2 = 2 Meters
*Insert 10 = 10 Meters
N/A
N/A
ACT-185
ACTUATORS