Anda di halaman 1dari 7

ERouting EIGRP PT Practice SBA

A few things to keep in mind while completing this activity: 1. Do not use the browser Back button or close or reload any Exam windows during the exam. 2. Do not close Packet Tracer when you are done. It will close automatically. 3. Click the Submit Assessment button to submit your work.

Introduction
In this Packet Tracer Practice Skills-based Assessment, you will: complete the configuration of a partially configured network establish connectivity to the West Region and the Internet through the use of static and dynamic routing verify connectivity

Addressing Table
Device Interface S0/0/0 S0/0/1 EastHQ S0/1/0 S0/1/1 Fa0/0 Fa0/1 E-Branch1 S0/0/0 S0/0/1 Fa0/0 E-Branch2 Fa0/1 S0/0/0 192.168.1.250 192.168.1.245 192.168.1.1 192.168.1.65 192.168.1.254 255.255.255.252 255.255.255.252 255.255.255.192 255.255.255.192 255.255.255.252 N/A N/A N/A N/A N/A 209.165.201.6 192.0.2.2 192.168.0.1 192.168.0.129 255.255.255.252 255.255.255.252 255.255.255.128 255.255.255.128 N/A N/A N/A N/A Address 192.168.1.249 192.168.1.253 Subnet Mask 255.255.255.252 255.255.255.252 Default Gateway N/A N/A

S0/0/1 EPC1 EPC2 EPC3 EPC4 NetAdmin NIC NIC NIC NIC NIC

192.168.1.246 192.168.0.2 192.168.0.254 192.168.1.2 192.168.1.126 192.168.1.66

255.255.255.252 255.255.255.128 255.255.255.128 255.255.255.192 255.255.255.192 255.255.255.192

N/A 192.168.0.1 192.168.0.129 192.168.1.1 192.168.1.65 192.168.1.65

Note: The password for user EXEC mode is cisco. The password for privileged EXEC mode is class.

Step 1: Configure the Device Basics.


Note: Initially, you can only access router E-Branch2 through the console connection on NetAdmin. a. Configure the following on E-Branch2: The router name is EB2. The privileged EXEC mode uses the following encrypted password: class. Enable Telnet and console line logins and use the following password: cisco. Configure the banner message-of-the-day as Authorized access only!

b. Using the Addressing Table, configure and activate all the necessary interfaces on E-Branch2. c. Configure correct host IP addressing. Configure EPC2 with the last IP address in the subnet. Configure EPC4 with the last IP address in the subnet.

Step 2: Discover the Network.


a. Explore the network to determine the IP address of the serial interface that EastHQ uses to connect to E-Branch2. b. Remotely access EastHQ.

Step 3: Configure Static and Default Routing.


a. Configure connectivity to the West Region. Configure a static route on EastHQ to the entire West Region. The West Region uses the 172.16.100.0/24 address space. Use the next-hop address argument. Configure a default route on EastHQ to send to the Internet all other traffic for destinations that are not found in the EastHQ routing table. Use the exit interface argument.

b. Verify static and default routing.

Step 4: Configure EIGRP Routing.


Configure EIGRP on EastHQ, E-Branch1, and E-Branch2. a. Use AS number 100. b. Do not advertise the network between EastHQ and the Internet. c. Do not advertise the network between EastHQ and the West Region. d. Advertise all other attached networks. e. Disable automatic summarization. f. Disable EIGRP updates out interfaces where there are no EIGRP neighbors available. g. On EastHQ, enter the one command in the EIGRP routing process that will propagate the default and static routes to E-Branch1 and E-Branch2.

Step 5: Modify the default EIGRP operation.


a. Configure the link between EastHQ and E-Branch2 so that the correct bandwidth of 384 k/s is used in EIGRP calculations. b. Configure E-Branch1 to advertise a summary route for the subnets 192.168.0.0/25 and 192.168.0.128/25 to EastHQ and E-Branch2. c. Configure E-Branch2 to advertise a summary route for the subnets 192.168.1.0/26 and 192.168.1.64/26 to EastHQ and E-Branch1.

Step 6: Verify Full Connectivity.


Although these are not scored, the following connectivity tests should be successful. Test connectivity to the West Region. Test connectivity to the Internet.

General Information
Assessment = ERouting PT Practice SBA EIGRP Form = FormB ERouting EIGRP PT Practice SBA User ID = 8066865 Scored Date = Sun Feb 10 18:34:35 GMT+00:00 2013 The time shown is Greenwich Mean Time (GMT). Subtract or add the appropriate number of hours to adjust to your local time. If you do not know the correct number of hours to adjust to GMT, visit http://www.timeanddate.com/worldclock/search.html.

Feedback
Based on your performance on this assessment, this table reports your preparedness for taking a hands-on skills exam covering similar networking skills. The estimates are based on expert opinion of the knowledge and skills needed to successfully perform these networking tasks on a repeatable basis. Proficiency Estimates Performance Components None Novice Partial Proficient

Basic Device Configuration

IP Address Configuration

Static and Default Route Configuration

Basic EIGRP Configuration

EIGRP Modification

Default Route Propagation

See Terminology section for an explanation of terms. The following feedback summarizes why you received less than proficient on any of the estimates:

Although you correctly configured both routers with summary routes, you did not correctly modify the default bandwidth.

Scoring
Total Points Possible = 100 Total Earned Points = 96

Performance Component: Basic Device Configuration


Description: The student can perform host and basic IOS device configurations including naming, security (passwords and banner motd), and interface addressing and activation. Maximum Points = 20 Earned Points = 20 Work Product Feature Basic Device Configuration E-Branch2 Hostname Network:E-Branch2:Host Name Student Result Points 20 1

Correct

E-Branch2 Banner Network:E-Branch2:Banner motd E-Branch2 Enable Secret Network:E-Branch2:Enable Secret E-Branch2 Console Password Network:E-Branch2:Console Line:Password Network:E-Branch2:Console Line:Login E-Branch2 VTY Password Network:E-Branch2:VTY Lines:0:Password E-Branch2 Fa0/0 Addressing Network:E-Branch2:Ports:FastEthernet0/0:IP Address Network:E-Branch2:Ports:FastEthernet0/0:Subnet Mask Network:E-Branch2:Ports:FastEthernet0/0:Power E-Branch2 Fa0/1 Addressing Network:E-Branch2:Ports:FastEthernet0/1:IP Address Network:E-Branch2:Ports:FastEthernet0/1:Subnet Mask Network:E-Branch2:Ports:FastEthernet0/1:Power E-Branch2 S0/0/0 Addressing Network:E-Branch2:Ports:Serial0/0/0:IP Address Network:E-Branch2:Ports:Serial0/0/0:Subnet Mask Network:E-Branch2:Ports:Serial0/0/0:Power E-Branch2 S0/0/1 Addressing Network:E-Branch2:Ports:Serial0/0/1:IP Address Network:E-Branch2:Ports:Serial0/0/1:Subnet Mask Network:E-Branch2:Ports:Serial0/0/1:Power

2 Correct 2 Correct 2 Correct Correct 1 Correct 3 Correct Correct Correct 3 Correct Correct Correct 3 Correct Correct Correct 3 Correct Correct Correct

Performance Component: IP Address Configuration


Description: The student can assign valid IP addresses from his or her subnetting scheme to hosts and networking devices. Maximum Points = 10 Earned Points = 10 Work Product Feature IP Address Configuration EPC2 Addressing Network:EPC2:Ports:FastEthernet:IP Address Network:EPC2:Ports:FastEthernet:Subnet Mask Network:EPC2:Default Gateway EPC4 Addressing Network:EPC4:Ports:FastEthernet:IP Address Network:EPC4:Ports:FastEthernet:Subnet Mask Network:EPC4:Default Gateway Student Result Points 10 5

Correct Correct Correct 5 Correct Correct Correct

Performance Component: Static and Default Route Configuration


Description: The student can configure static and default routes. Maximum Points = 20 Earned Points = 20 Work Product Feature Static and Default Route Configuration Static Route on EastHQ to West Region Network:EastHQ:Routes:Static RoutesV2:172.16.100.0-24-192.0.2.1-0-1 Default Route on EastHQ to Internet Network:EastHQ:Routes:Static RoutesV2:0.0.0.0-0-Serial0/1/0-0-1 Student Result Points 20 12 8 Correct

Correct

Performance Component: Basic EIGRP Configuration


Description: The student can configure EIGRP. Maximum Points = 20 Earned Points = 20

Work Product Feature Basic EIGRP Configuration EIGRP Routing Network Statements Network:EastHQ:EIGRP:100:Networks:192.168.1.248 0.0.0.3 Network:EastHQ:EIGRP:100:Networks:192.168.1.252 0.0.0.3 Network:E-Branch1:EIGRP:100:Networks:192.168.0.0 0.0.0.127 Network:E-Branch1:EIGRP:100:Networks:192.168.0.128 0.0.0.127 Network:E-Branch1:EIGRP:100:Networks:192.168.1.248 0.0.0.3 Network:E-Branch1:EIGRP:100:Networks:192.168.1.244 0.0.0.3 Network:E-Branch2:EIGRP:100:Networks:192.168.1.0 0.0.0.63 Network:E-Branch2:EIGRP:100:Networks:192.168.1.64 0.0.0.63 Network:E-Branch2:EIGRP:100:Networks:192.168.1.252 0.0.0.3 Network:E-Branch2:EIGRP:100:Networks:192.168.1.244 0.0.0.3 EIGRP Routing Autosummarization Statements Network:EastHQ:EIGRP:100:Auto Summary Network:E-Branch1:EIGRP:100:Auto Summary Network:E-Branch2:EIGRP:100:Auto Summary EIGRP Routing Passive Interface Statements Network:E-Branch1:EIGRP:100:Passive Interface:FastEthernet0/0 Network:E-Branch1:EIGRP:100:Passive Interface:FastEthernet0/1 Network:E-Branch2:EIGRP:100:Passive Interface:FastEthernet0/0 Network:E-Branch2:EIGRP:100:Passive Interface:FastEthernet0/1

Student Result

Points 20 9

Correct Correct Correct Correct Correct Correct Correct Correct Correct Correct 7 Correct Correct Correct 4 Correct Correct Correct Correct

Performance Component: EIGRP Modification


Description: The student can modify the default bandwidth that is used by EIGRP in route calculation. The student can manually summarize EIGRP routes to reduce the size of routing tables. Maximum Points = 24 Earned Points = 20 Work Product Feature EIGRP Modification Bandwidth Configuration Network:EastHQ:Ports:Serial0/0/1:Bandwidth Info Network:E-Branch2:Ports:Serial0/0/0:Bandwidth Info E-Branch1 Summary Routes Network:E-Branch1:Ports:Serial0/0/0:EIGRP Summary Addresses:100:192.168.0.0 255.255.255.0 5 Network:E-Branch1:Ports:Serial0/0/1:EIGRP Summary Addresses:100:192.168.0.0 255.255.255.0 5 E-Branch2 Summary Routes Network:E-Branch2:Ports:Serial0/0/0:EIGRP Summary Addresses:100:192.168.1.0 255.255.255.128 5 Network:E-Branch2:Ports:Serial0/0/1:EIGRP Summary Addresses:100:192.168.1.0 255.255.255.128 5 Student Result Points 20 0 Correct Incorrect 10 Correct Correct 10 Correct Correct

Performance Component: Default Route Propagation


Description: The student can propagate a default route in EIGRP. Maximum Points = 6 Earned Points = 6 Work Product Feature Default Route Propagation EastHQ redistribute static Command Network:EastHQ:EIGRP:100:Redistribution:Static Student Result Points 6 6

Correct

Terminology
Performance Component - a description of what the student knows and can do about a coherent set of networking knowledge and skills; the level at which the student's work product can be assigned a proficiency estimate. Proficiency Estimate - a description of a student's level of mastery of the performance component. The proficiency estimate is not meant to be a comprehensive statement of what the student knows and can do.

Work Product - student performance recorded during this assessment. For example, the submitted activity file, timing statistics, and final running configurations. Work Product Feature - An aspect of the student's work product. The feature can have a name and a value. For example, Name = FastEthernet0/0:IP Address; Value = 192.168.1.1 Individual work product features are combined into performance components and scored based on the complexity of the performance observed. Because the construction of performance components is based on the underlying work product features as well as the unique design of each scenario, strict boundaries for determining a proficiency rating are not possible. In general:

None - 0% to 25% of possible points Novice - 26% to 50% of possible points Partial - 51% to 85% of possible points Proficient - 86% to 100% of possible points

Anda mungkin juga menyukai