6.2.1-A 2.1
APPLICATIONS Horizontal distribution or equipment terminations in telecommunications rooms and main distribution rooms Interconnection terminations in consolidation points. TECHNICAL SPECIFICATIONS
Distribution Connectors
Materials
Housing material: fire-retardant thermoplastic rated UL94V-0, beige IDC clip: copper alloy with tin plating over nickel.
A0393146 QCBIX1A4 Connector
Mechanical Characteristics
IDC Clip Gas-tight connection insulation slicing of 22, 24 and 26 AWG (0.64, 0.5 and 0.4 mm) plastic insulated solid copper conductors Durability: 200 insertions of any combination of wire gauge.
DESCRIPTION The BIX Distribution Connector is a 25-pair connector. The connectors symmetrical construction allows termination of cables on one side and cross-connect jumper wires or BIX patch cords on the other. Each BIX connector is equipped with 50 double-ended Insulation Displacement Connection (IDC) clips for terminating plastic insulated solid copper conductors without stripping. The connector is built with two staggered rows of IDC clips enclosed in a three-layer construction of fire-retardant plastic wafers. Pair splitters on each side of the connector facilitate wire insertion. FEATURES & BENEFITS Robust and installer-friendly design to reduce installation costs High-density connector to reduce installation space requirements Staggered IDC clips to ensure superior transmission performance Built-in pair splitters to facilitate wire insertion Fully enclosed clips in plastic housing to prevent injuries and protect connections Snap into BIX Mounts for easy insertion and removal Mix and match modular flexibility to accommodate different installation size requirements.
Electrical Characteristics
Dielectric strength: 1,000 V RMS at 60 Hz for 1 minute Current rating: 1.5 A maximum Insulation resistance: 100 M minimum between clips Contact resistance: 1 m per contact.
COMPLEMENTARY PRODUCTS
INSTALLATION TIPS Plan the telecommunications room layout prior to cross-connect installation Use the QCBIX1A Connector for terminating m ulti-pair cables Use the QCBIX1A4 Connector for terminating 4-pair cables Label each connector carefully for future reference and ease of administration Connection made using the BIX Connecting Tool. PACKAGING 20 units packaged in a cardboard box Standard shipping carton of 200 units (10 boxes).
ORDERING INFORMATION
6.2.1-A BIX Distribution Connector
DETAIL
UPC
ORDERING NUMBER
628575039890 628575041688
A0266828 A0393146
100
www.nordx.com
Copper Solutions
6.2.4-A 2.4
BIX Mount
TECHNICAL SPECIFICATIONS
Mounts
Materials
Base: steel, 16 gauge, powder paint finish, beige Fanning strip material: fire-retardant thermoplastic, UL94V-0, beige.
Capacity
BIX Mount
A0270164 QMBIX10A 250-pair BIX Mount
12 10 2
6 5 1
INSTALLATION TIPS Refer to Installation Practice BIX IDC Wall Mount System (NOT 0331) for detailed installation method.
A0284798 QMBIX10C 50-pair BIX Mount
DESCRIPTION BIX Mounts are basic components used in building a modular Cross-Connect System. They can accept BIX Distribution, Multiplying or Modular Jack Connectors. The 300 and 250-pair mounts can be wall-mounted or installed on BIX Frames. These mounts feature an interlocking design allowing them to be stacked for larger cross-connect installations. The 50-pair mount is typically used in small cross-connect installations. FEATURES & BENEFITS Robust and installer-friendly design to reduce installation costs Can be assembled with interlocking distribution rings into easily expandable wall mounted installations Compatible with locking covers for installation security.
COMPLEMENTARY PRODUCTS
104
www.nordx.com
Copper Solutions
6.2.4-B
TECHNICAL SPECIFICATIONS
2.4
Materials
Base: steel, 16 gauge, powder paint finish, beige Fanning strip material: fire-retardant thermoplastic, UL94V-0, beige. INSTALLATION TIPS Not compatible with BIX Modular Jack Connector and BIX Patch Cords installations.
Mounts
DESCRIPTION PACKAGING The 50-pair mount with cover is sold as an assembly Individually packaged unit in a cardboard box. and is typically used in small cross-connect installations where security and/or dust protection is required. FEATURES & BENEFITS Robust and installer-friendly design to reduce installation costs Locking cover provides dust protection and security to the installation Snap-on cover provides dust protection to the installation Elastomer cover features knock-outs for cable entry.
ORDERING INFORMATION
6.2.4-A BIX Mount
DETAIL
UPC
ORDERING NUMBER
DETAIL
UPC
ORDERING NUMBER
628575040124 628575040131
A0277853 A0277854
www.nordx.com
105
Copper Solutions
6.2.14-A 2.14
Testing Tools
DESCRIPTION The Test Probe is a single-pair probe that clips onto the termination strip of BIX Distribution or BIX Modular Jack Connectors to facilitate testing. FEATURES & BENEFITS Spring-loaded blades to protect IDC contacts 2-color housing to ease identification of tip and ring Alligator clips adapt to any test equipment probe Locking mechanism helps to hold the probe steady on the connector during testing. TECHNICAL SPECIFICATIONS
COMPLEMENTARY PRODUCTS
ORDERING INFORMATION
6.2.14-A BIX Test Probe
DETAIL
PACKAGING
UPC
ORDERING NUMBER
1-pair
1/pack
628575039999
A0270166
118
www.nordx.com
Copper Solutions
6.2.13-A
TECHNICAL SPECIFICATIONS
2.13
BIX Tools
DESCRIPTION The BIX Connecting Tool is the only tool required to terminate cables, pigtails or jumper wires on all GigaBIX and BIX connection products. The BIX Connecting Tool is a spring-activated hand tool. A single forward movement will seat the wire into the BIX IDC clip and cut off the excess wire. The tool will terminate 22, 24 and 26-AWG plastic insulated solid copper conductors. FEATURES & BENEFITS Spring-actived scissors reduce installers fatigue Sturdy design for long lasting operation The no-cut select button allows for easy bridging contacts. APPLICATIONS Terminating GigaBIX and BIX Connectors.
DESCRIPTION The BIX Tool Pouch is a leather belt pouch to carry and protect the BIX Tool. FEATURES & BENEFITS Made of high-quality leather for maximum durability Belt hanging feature to conveniently carry BIX Tool. TECHNICAL SPECIFICATIONS
Materials
ORDERING INFORMATION
6.2.13-A BIX Connecting Tool
UPC
ORDERING NUMBER
628575039982
6.2.13-B Tool Pouch
A0270165
UPC
ORDERING NUMBER
628575076888
C0054642
www.nordx.com
117
Copper Solutions
6.2.16-A
2.16
Designation Strip
DESCRIPTION The Designation Strip is designed to be used in conjunction with all BIX Mounts and BIX Connectors. It snaps in between two connectors and provides space for self adhesive BIX labels. The strip is made of white fire-retardant plastic, with ridges on the top and bottom for easy alignment and placement of designation labels. FEATURES & BENEFITS Designation Strips have ridges on top and bottom to facilitate label alignment Easy to snap in and out for quick installation and maintenance. TECHNICAL SPECIFICATIONS
Materials
Fire-retardant plastic, white.
COMPLEMENTARY PRODUCTS
ORDERING INFORMATION
6.2.16-A BIX Designation Strip
COLOR
PACKAGING
UPC
ORDERING NUMBER
White
50/pack
628575040018
A0270169
www.nordx.com
121