User Name
Password
Log in
Help
Register
g Remember Me? c d e f
Home
Forum
What's New?
Blogs
Quick Links Advanced Search
Forum Actions
Forum
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. Results 1 to 1 of 1
Yesterday, 03:18 PM
Patricia G. Morrow
Junior Member
#1
ASTM A352 gr. LCC (Low Temp CS), A216 WCB, A216 WCC
316 S.S
316 S.S
316 S.S
Stainless Steel
316 S.S
316 S.S
316 S.S
316 S.S
http://www.instreng.com/instrumentation-selection-calculations/435-typical-ball-valve-mat... 3/26/2013
Page 2 of 3
Incoloy or Inconel
UNS N08825 or A-350 LF2, A-216 WCB with UNS N06625 Overlay BRONZE (UNS C95800)
UNS N06625
UNS N07718
UNS N06625
Bronze
ASTM A890 GR. 4A (UNS J92205) (Duplex~22% Cr), ASTM A182 GR. F53 (UNS S32750) or F55 (UNS S32760) (Super Duplex~25% Cr) UNS S31254 (6 Moly Stainless Steel)
6 Moly SS
UNS S31254
UNS S31254
UNS S31254
Notes: 1. Piping class shall be used as a reference to select ball valve material with its related pressure and temperature ratings. The above ball valves material selection is for information and indicative only. 2. All material that will be used in sour or corrosive application shall follow the limitation stated in the NACE MR 0175 standards. 3. The usage of 316 SS, duplex, and its families shall take into account a chloride content of the service fluid since these materials is having a strict limitation to use under such conditions. 4. Seat insert material shall be selected as per valve manufacturer recommendation based on service temperature, pressure, and fluid compatibility. 5. Metal seated ball valves (ball valve with metal seat ring only without seat insert) is recommended for dirty fluid application such as multiphase well fluid, crude oil, etc or
http://www.instreng.com/instrumentation-selection-calculations/435-typical-ball-valve-mat... 3/26/2013
Page 3 of 3
any application that the seat insert material cant be used anymore due to very abrasives or high temperature services. 6. Cast and forged material are interchangeable.
Similar Threads
Replies: 0
Last Post: 03-24-2013, 11:41 PM
Replies: 0
Last Post: 03-09-2013, 12:08 AM
Replies: 0
Last Post: 01-17-2013, 03:18 AM
Replies: 0
Last Post: 01-17-2013, 02:15 AM
Replies: 0
Last Post: 01-14-2013, 12:59 PM
Posting Permissions
You may not threads You may not You may not attachments You may not posts
BB code is On Smilies are On [IMG] code is On [VIDEO] code is On HTML code is Off Trackbacks are On Pingbacks are On Forum Rules
Refbacks are On
-- Default Style
http://www.instreng.com/instrumentation-selection-calculations/435-typical-ball-valve-mat... 3/26/2013