Altivar 11
Real efficiency
at a reduced size!...
Parking barriers
Exceptional dynamics:
Use of an advanced flux vector motor control
minimises cycle times.
Customisation of "Up / Down" cycles due to the
assignment of several functions on the same logic input:
Different ramps for up / down cycles.
Up priority if obstructed going down.
Different pre-selectable speeds both for up / down
cycles.
Answers to abrupt weather changes:
Perfect for simple mechanical Operation assured down to -10°C.
applications in industrial and
commercial sectors:
Hoardings
Serial configurations and simplified maintenance:
Mechanical handling: Use of PowerSuite software workshop
conveyors, garage doors, parking on standard PC or Pocket PC.
barriers, supplying conveyors, etc... Optimisation of size
Use of baseplate version.
Special machines: Solutions for power supply line noise:
grinders, saws, drills, exercise Built-in EMC class B filters.
equipment, hoardings, Reduction in generated pollution:
extractors, dough mixers, etc... Switching frequency of 16 kHz.
The performance and simplicity
of the Altivar 11 will make you Dough mixers
forget multispeed motors, Perfect control of this motor drive application:
mechanical drives, DC drives, Without tripping as the dough hardens.
special motors and electro- Protection of personnel:
mechanical starters, etc. Due to the low leakage current of the Altivar 11,
It easily replaces all these solutions. the drive can be associated with a 30 mA differential
circuit-breaker. This also includes models with a
built-in EMC class B filter.
Conveyors
Tailored ergonomics, as near to the operator
as possible:
Simple setting-up using local controls:
start / stop buttons and potentiometer for
setting speed available on the drive.
Altivar 11 :
The little one with
big prospects...
Voltage ranges:
120 V single-phase.
240 V single-phase.
230 V 3-phase.
Uninterrupted
service
High degree of monitoring and protection at all levels:
Of the motor
• thermal protection by continuous calculation of I2t.
Robustness
to meet every Of the drive
challenge • thermal protection by PTC probe integrated in the
Even in severe power module,
environments from • protection against short-circuits between output
-10 up to +50° C, phases.
the Altivar 11 is • safety related to the supply line:
perfectly - overvoltage,
operational - undervoltage,
without any - phase failure (on 3-phase)…
degradation in its
performance. Of personnel
• Due to the low leakage current of the Altivar 11,
the drive can be associated with a 30 mA differential
circuit-breaker. This also includes models with a
built-in EMC class B filter.
Perfect suitability
The smallest drive for any application
in the world !
The compactness of the Altivar 11 considerably
reduces the size of your enclosures and, in
addition, reduces the size yet again due to the
possibility of mounting several drives side by side.
The closest
possible to
machines...
International coverage
The Altivar 11 could
not be closer to
your machine:
it can be installed
directly on its
framework (version Built-in
on baseplate). EMC
class B Local
The use of natural Current NEC filter controls
convection up to 208 V 1999 (Europe). and
0.75 kW makes (North negative
them ideal where America). logic.
silent operation is
necessary.
(Asia).
Protect
everything in
memory with
PowerSuite* software
* Replace the letter " H " by " P " to obtain the reference of the version on a baseplate.
** Add 7 mm to the depth for the Asia range.
The efficiency of Telemecanique
branded solutions
Used in combination, Telemecanique products provide quality solutions,
meeting all your Automation and Control applications requirements.
A worldwide presence
Constantly available
■ More than 5 000 points of sale in 130 countries.
■ You can be sure to find the range of products that are right for you and
Complex, high power machines
Altivar 71: 0,37 to 500 kW which complies fully with the standards in the country where they are used.
89, bd Franklin Roosevelt of this document do not constitute a commitment on our part without confirmation.
92504 Rueil-Malmaison Design: 3000 NR
FRANCE Photos: Schneider Electric
www.schneider-electric.com
www.telemecanique.com
01/2006
038996