Units? US = 1, SI = 2
For cantilever slab, ENTER "1", otherwise "0": 1 Minimum spacing 4 in Minimum depth of slab 5 in Clear cover 0.75 in Steel Grade 40 ksi Concrete Strength 3 ksi Floor finish 50 psf Partition walls psf Extra dead load 0 psf Live load: 80 psf Input the edge conditions: 1- fixed/continuous 0- simple Continuous along shorter edge Continuous along longer edge
Enter the load combination 1.2 DL + 1.6 LL Enter the factor to increase the ACI positive moment 1.25 Enter the factor to decrease the ACI negative moment 0.9 Enter the factor to increase the BS8110 negative moment 1.1 Enter the percentage weightage to be given to ACI coefficients 50% Enter factor to increase the factored moment 1.00 Enter factor to increase the calculated steel 1.20 Required rounding of spacing 1.00 in Enter value in spacing units by which the maximum spacing must be less than 2h 1.00 Number of similar slabs 1 Calculated Depth: Final depth Trial Results: 11.5 12.0
Calc. Shorter (+) Steel: Calc. Longer (+) Steel: Calc. Shorter (-) Steel: Calc. Longer (-) Steel:
0 0 6 3
@ @ @ @
0 0 1 4
@ @ @ @
Steel Wastage=
5.00%
ALL PRICES MUST INCLUDE PREPARING AND LAYING, ETC. AND PROFITS Steel (40), Cost per kg Steel (60), Cost per kg Concrete per Cft = = = 40 50 150 Rs. Rs. Rs. Cement Per Bag Sand per Cft Aggregate per Cft
150
pcf
5.00
k/ft
Factored
Recommended value is 1.25 Recommended value is 0.90 Recommended value is 1.1 Recommended value is 50% Recommended value is 1.00 Recommended value is 1.00 Recommended is 0.5 in Recommended value is 0.00
1 12
Depth is changed !!
OUTPUT
SLAB NAME: 4 5 0.75 40 3 50 0 80 0.00 1 12.00 0.000 0.000 0.000 0.000 1 0.500 0.000 x x x x X x x in in in ksi ksi psf psf psf
S1
Edge conditions: 1- fixed/continuous 0- simple Continuous along shorter edge Continuous along longer edge
Minimum spacing Minimum depth of slab= Clear cover Steel Grade Concrete Strength Floor finish Partition walls Live load: Add an extra DL and revise Number of similar slabs Depth of slab Mmax(+) (short) dead = Mmax(+) (short) live = Mmax (short) positive = Mmax (+)(long) dead = Mmax (+)(long) dead = Mmax (long) positive = Cantilever moment = Mmax (short)negative = Mmax (long) negative =
0 0 1 0
0.00
50 9.5
ft ft
Cantilever 12 12 12 12 12 12 12 = = = = = = = = = 0.00 0.00 0.00 0.00 0.00 0.00 k-in k-in k-in k-in k-in k-in
#0 @ 0 in. C/C
#3 @ 4 in. C/C
#0 @ 0 in. C/C
DEPTH =
12 in
#3 @ 23 in. C/C
Shorter Positive Steel: Longer Positive Steel: Shorter Negative Steel: Longer Negative Steel:
0 0 6 3
@ @ @ @
Shorter Bottom Longer Bottom Shorter Top Longer Top Shorter Hangers Longer Hangers
Dia. 0 0 6 3 3
No. 0 0 600 29 29
No.3
No.6
Total weight in kgs: Volume of Concrete Steel (40), Cost per kg Steel (60), Cost per kg Concrete per Cft Total Cost of Slab = = = = = 497.42 40 50 150.00 209973 Cft Rs. Rs. Rs. Rs.
530
2854
G.Total=
#3 @ 4 in. C/C
3384
842.6 Unit Unit Rate Amount 96.3 Bags @ 300.00 28890 240.8 Cft @ 8.00 1926 481.5 Cft @ 20.00 9630 3384.0 Kgs @ 40.00 135360 Total Material Cost = 175806