PNMT Installation
Options Setting
Procedure:
2. Click Phone and Modem Options to start configuring the modem .As shown above:
Options Setting
Procedure:
4. Verify the Location and Area Code. As shown above
Options Setting
Procedure:
6. Check Dont detect my modem and click [Next] to continue. As shown above
January 13, 2007 NEC Corporation 2007 5
Options Setting
Procedure:
8. Select Selected ports and COM#, Then click [Next] to continue. As shown above
January 13, 2007 NEC Corporation 2007 6
Options Setting
Procedure:
10. Verify that Standard 19200 bps Modem and COM1 are displayed. Click [OK]. As shown above.
January 13, 2007 NEC Corporation 2007 7
Procedure:
2. Select Install from a list or specific location [Advanced] and click [OK]. As shown above.
January 13, 2007 NEC Corporation 2007 8
Procedure:
4. Click [Continue Anyway] in the hardware installation popup alert. As shown above.
January 13, 2007 NEC Corporation 2007 9
Procedure:
6. USB Com Port Driver installation is complete. As shown above.
January 13, 2007 NEC Corporation 2007 10
PNMT Installation:
Procedure:
1.Click Start--->Setting--->Control Panel and the Network Connections icon to start configuring the Dialup Setting. As shown below:
Dial-Up Setting
Procedure:
2. The Network Connections window appears. Click Create a new connection in the Network Tasks area. As shown above.
January 13, 2007 NEC Corporation 2007 11
PNMT Installation:
Procedure:
3.The Welcome to the New Connection Wizard window appears, Click [Next] . As shown below:
Dial-Up Setting
Procedure:
4. Select Connect to the network at my workplace and click [Next] to continue. As shown above.
January 13, 2007 NEC Corporation 2007 12
PNMT Installation:
Procedure:
5. Select Dial-up connection and click [Next] to continue. As shown below:
Dial-Up Setting
This screen appears only when a USB Modem Driver has been installed.
Procedure:
6. Select ModemUSB Modem Driver [COM#] and click [Next] to continue. As shown above.
January 13, 2007 NEC Corporation 2007 13
PNMT Installation:
Procedure:
7. In the New Connection Wizard window, enter Pnmt in the Company Name field and click [Next] to continue. As shown below:
Dial-Up Setting
Procedure:
8. Enter any number in the Phone number field and click [Next] to continue. As shown above.
January 13, 2007 NEC Corporation 2007 14
PNMT Installation:
Procedure:
9. Verify that Pnmt is displayed as the connection, and click [Finish]. As shown below:
Dial-Up Setting
Procedure:
10. In the connect Dial-up Connection window, Click [Properties] . As shown above.
January 13, 2007 NEC Corporation 2007 15
PNMT Installation:
Procedure:
11. Verify that Modem-Standard 19200bps Modem [COM1] is displayed on the General tab in the Dial-up connection Properties window. Click [Configure] , As shown below:
Dial-Up Setting
Procedure:
12. In the Modem Configuration window, uncheck al five boxes. As shown above.
January 13, 2007 NEC Corporation 2007 16
PNMT Installation:
Procedure:
13. Retain the default setting on the Options tab and Click the Security tab, As shown below:
Dial-Up Setting
Procedure:
14. Retain the default setting on the Security tab and Click the Networking tab. As shown above.
January 13, 2007 NEC Corporation 2007 17
PNMT Installation:
Procedure:
15. On the Networking tab, verify that PPPis displayed in the Type of dial-up server I am calling field and uncheck File and Printerand Client for Microsoft., As shown below:
Dial-Up Setting
Procedure:
16. Click Settings uncheck all the boxes in the window appears. As shown above. Click [OK] to go back to the previous window. Highlight Internet Protocol (TCP/IP) and then click [Properties]
January 13, 2007 NEC Corporation 2007 18
PNMT Installation:
Procedure:
17. Verify that both Obtain an IP address automatically and Obtain DNS server address automatically are selected., As shown below:
Dial-Up Setting
Procedure:
18. In the Advanced TCP/IP Settings window, uncheck Use IP header compression for the PPP link. Click [OK].
January 13, 2007 NEC Corporation 2007 19
PNMT Installation:
Procedure:
19.Retain the default setting on the Advanced tab and click [OK] , As shown below:
Dial-Up Setting
Procedure:
2. The Windows Components Wizard window appears. Remove the check from Management and Monitoring Tools, and Click Details As shown above:
January 13, 2007 NEC Corporation 2007 21
Procedure:
4. Click [Finish] to complete the removal of SNMP Service As shown above:
January 13, 2007 NEC Corporation 2007 22
Procedure:
2. Click Services in the Administrative Tool window. As shown above:
January 13, 2007 NEC Corporation 2007 23
Procedure:
4. Select Manual in the Startup type field and click Stop in the Service status field on the General tab. Click [OK] or [Apply] .As shown above:
January 13, 2007 NEC Corporation 2007 24
Procedure:
6. Restart the computer. As shown above:
January 13, 2007 NEC Corporation 2007 25
PNMT Installation:
Procedure:
1. Insert the PNMT Installation CD-ROM. Open the CD-ROM folder and double click setupwin32.exe. As shown below:
PNMT Setup
IF PNMT software has already been installed , please uninstall it before you install a new version
Procedure:
2. The above window appears until loading is completed.
January 13, 2007 NEC Corporation 2007 26
PNMT Installation:
Procedure:
3. The welcome message window appears. Click [Next]. As shown below:
PNMT Setup
The Default Path is C:\PNMTj. It is not possible to include blank spaces as in Program Files.
Procedure:
4. Specify the directory in which the PNMT is to be installed. Click [Next] .As shown above.
January 13, 2007 NEC Corporation 2007 27
PNMT Installation:
Procedure:
5. Specify the License. Key file if one is available. Click [Next]. As shown below:
PNMT Setup
The Default Path is <PNMTj install Directory> when a stored Directory is not specified. It is not possible to include blank spaces as in Program Files.
Procedure:
If on License Key is available, Operation in Trial mode is possible for 30 days.
6. Specify the directory for storing PNMT log files. Click [Next] .As shown above.
28
PNMT Installation:
Procedure:
7. Click [Install]. As shown below:
PNMT Setup
Procedure:
8. During installation, this window appears. As shown above.
January 13, 2007 NEC Corporation 2007 29
PNMT Installation:
Procedure:
9. Click [Finish] to close the PNMT Installation wizard. As shown below:
PNMT Setup
30
Procedure:
2. If above window appears, select [Unblock] (when using the Windows XP SP2).
January 13, 2007 NEC Corporation 2007 31
User name: admin Password: (There is no initial Password. Just press Enter. A Password can then can be set.)
32