ATrack Technology Inc. 3F., No. 88, Sec. 1, Neihu Rd., Neihu Dist., Taipei City 11493, Taiwan (R.O.C.)
Confidential Document
Contents
1. Notification .............................................................................................................................. 3 1.1. Disclaimer .................................................................................................................................... 3 1.2. Copyright ...................................................................................................................................... 3 1.3. Warning ........................................................................................................................................ 3 Introduction............................................................................................................................. 4 2.1. Wireless Relay Operation ............................................................................................................ 4 Installation ............................................................................................................................... 5 3.1. AX5 Configuration ........................................................................................................................ 5 3.2. Wireless Module Installation ........................................................................................................ 5 3.3. Wireless Relay Installation ........................................................................................................... 6 3.4. Wireless Relay Testing ................................................................................................................. 7 3.5. LED Indications ............................................................................................................................ 7 Appendix.................................................................................................................................. 8 4.1. Hardware Specification ................................................................................................................ 8 4.2. FCC Regulations:......................................................................................................................... 9
2. 3.
4.
Page 2 of 9
Confidential Document
1. Notification
1.1. Disclaimer
This document, and all other related products, such as device, firmware, and software, is developed by ATrack Technology Inc. thoroughly. At the time of release, it is most compatible with specified firmware version. Due to the functionalities of the devices are being developed and improved from time to time, the change in the protocol, specification, and firmware functions are subjects to change without notice. ATrack Technology Inc. is obligated to modify all the documentation without the limitation of time frame. A change notice shall be released to ATrack Technology Inc. customers upon the completion of document modification.
ATrack Technology Inc. products are not intended to be used as life support or rescue equipments. ATrack Technology Inc. is not liable for any loss or injury caused by using or referencing to any products. Any possible means of using or integrating ATrack Technology Inc. products shall be avoided.
1.2. Copyright
ATrack Technology Inc. holds all parts of intellectual rights applicable in the copyright laws in all the countries. Any or all parts of this document shall not be exposed to non-authorized party without any form of approval from ATrack Technology Inc. Any forms, including but not limited to oral, copy, or internet sharing, of releasing or exposing information to an unauthorized party shall be prohibited. ATrack Technology Inc. reserves the rights of litigation in the violation of such copyright laws.
1.3. Warning
Connecting the wire inputs can be hazardous to both the installer and your vehicles electrical system if not done by an experienced installer. This document assumes you are aware of the inherent dangers of working in and around a vehicle and have a working understanding of electricity.
Page 3 of 9
Confidential Document
2. Introduction
The Wireless Relay is used for ignition/starter kill application which controlled by ATrack AX5 OBD-II GPS/GPRS device. The relay ON/OFF state can be controlled by remote application server or SMS via cellular phone. It can be also controlled by itself when the AX5 device is unplugged. It utilizes short range RF technology and bi-directional data transmission between AX5 device and Wireless Relay. Its a benefit to hide the Wireless Relay in anywhere of the vehicle.
The Wireless Relay is an extended accessory of the AX5. This accessory contains a Wireless Relay with harness and a wireless module.
Wireless Relay
Wireless Module
Page 4 of 9
Confidential Document
3. Installation
3.1. AX5 Configuration
The Wireless relay shall be paired with one AX5 device before installing it to the vehicle. The Wireless Relay serial number shall be entered into the AX5 device. Please refer to command description below. Please note that the AX5 Wireless Relay function is supported only with AX5 firmware version 1.07 or higher.
Wireless Module
AX5
Page 5 of 9
Confidential Document
(1) Connect white(85) wire to the constant 12V of the vehicle. (2) Connect black(86) wire to the ground. (3) Finding the starter wire on the ignition switch (4) Breaks continuity of the wire between the ignition switch and the starter motor. (5) Connect blue(30) wire to the wire at ignition switch side. (6) Connect yellow(87) wire to the wire at the starter motor side.
Wireless Relay
85 White
86 Black
30 Blue
87 Yellow
Starter Motor
Ignition Switch
12V Battery
Page 6 of 9
Confidential Document
Command Syntax
Command: AT$OUTC=<Output ID>,<Output Mode> Response: $OK
Parameter Description
Parameter <Output ID> <Output Mode> Description The <Output ID> is 10 for the Wireless Relay 0- Relay always OFF 1- Relay always ON 2- Timeout Mode (Default Mode) When Wireless Relay get signal from AX5 device, the Relay will ON. When AX5 device is unplugged and Wireless Relay no RF signal for 90 seconds, the Relay will OFF.
Status LED
Page 7 of 9
Confidential Document
4. Appendix
4.1. Hardware Specification
Wireless Relay Max. Carrying Current RF Frequency RF Output Power Modulation Receiver Sensitivity Frequency Tolerance Supply Power Standby Current Active Current Operating Temperature Operating Humidity 45A/2 minutes, 35A/1 hour @ DC16V 20C 433MHz -15dBm (0.03mW) GFSK -112dBm 40ppm DC8V~DC16V 0.9mA @ DC12V 40mA @ DC12V -40C ~ +85C 5% R.H. to 85% R.H.
Page 8 of 9
Confidential Document
-Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.
Page 9 of 9