Anda di halaman 1dari 31

COMMAND TABLE

. 1 31

Command Table
Summary view of Studio 3 commands

Studio 3 Command Table


View this topic in a standalone Web Browser The table below shows all commands and the drop down menu from which they can be called. For Design Window commands the table also shows the quick key, and the corresponding quick key in the previous version of Guide. All commands are hyper-linked to their Help file. Use the Find option supplied by your browser to search for commands or quick keys. You must have an active Studio 3 application, and project loaded, to be able to use the Run button on the command/process Help topic title bar. You must also be licensed to use the selected command.

z Studio 3 Commands z Studio 3 Processes

For more information on the terms 'Command' and 'Process', see Command Table Introduction. Studio 3 Commands Command Name abort-string-tracing add-attributes add-dependency-string Quick Key ast nat ade Module CORE CORE ACV

Deletes the string currently being digitized and exits string tracing mode. Adds a new attribute (column) to an object in memory. Adds a scheduling dependency between two mining blocks. It ensures that a block is fully mined or scheduled before another block can be taken. add-segment-to-string adjust-string-in-ore adjust-to-gradient ass adj atg CORE CORE CORE Select a string and add a segment to the end of it. Adjusts string to an ore outline using a defined ore definition. Adjusts a string to fit a gradient supplied by the user. Modifies the elevations of points on a selected string, so that all string segments match a user-supplied gradient. assign-cross-section assign-end-section assign-fill-codes assign-fill-codes-dhleft assign-fill-codes-dhright assign-results attribute-control-switch Toggles the use of attributes in string control. auto-fillet-string-switch Toggles automatic filleting of string data. auto-progress-switch No description available auto-visualiser-update-switch avu GVP The auto-visualiser-update-switch command, toggles functionality between causing the Visualizer window contents to update on completion of a Design window command, or blocking updates until a manual update is performed. tap SCH afs OPM acs aes afc lg rg dt acc UGM UGM CORE CORE CORE SCH OPM Assign individual drive cross-sections along a string. Assigns a drive cross-section along a string at a supplied orientation. Assign colours to models or drillholes based upon ore definition. Format the colouring of the left hand graph being displayed on drillholes. Format the colouring of the right hand graph being displayed on drillholes. Assigns tonnages and grades to a selected perimeter.

mk:@MSITStore:C:\Program%20Files\Datamine\Studio3\Help\DatamineStudio.chm:... 05.11.2010

COMMAND TABLE

. 2 31

berm-string-colour berm-to-wf-switch blast-layout blast-layout-between-wf blast-layout-from-wf blend-fam-faces-switch blend-mining-blocks blend-proportion-switch This Help topic is under development box-all-points-inside-switch box-any-points-inside-switch break-string break-strings break-string-with-string cancel-command Cancels the current design window command cg-points No description available change-azi-by-neg-inc No description available change-azi-by-pos-inc No description available change-dip-by-neg-inc No description available change-dip-by-pos-inc No description available change-period Change current calendar period. charge-blastholes Charge blastholes. check-crossover-switch check-for-crossovers No description available check-link-selected-strings No description available check-toe-spacing No description available circle-by-three-points

bc bws la blbw blfw uf bb tsm sib scb bs bki bks can cgp caca+ cdcd+ cpe cbh tcc cxx clss cts a3

OPM OPM STP STP STP ACV ACV ACV CORE CORE CORE CORE CORE CORE CORE CORE CORE CORE CORE SCH RNG OPM CORE WFM RNG CORE

Sets the color for berm strings in an open pit design. Toggles wireframe intersection when creating a berm. Layout a blast pattern within a perimeter to create a new set of drillholes Layout a blast pattern between wireframe limits to create a new set of drillholes. Layout a blast from a surveyed wireframe surface. Toggle on or off the use of mining faces when blending. Blend selected blocks according to specified targets.

Control whether string is selected if all points lie within selection box. Control whether string is selected if any point lies within selection box. Breaks a string at a selected point - Any string can be broken at any point. Breaks a string where it is crossed by any other string. Break a string where it is crossed by another selected control string.

Toggle for controlling the automatic use of crossovers in pit design commands.

Draws an arc defined by three points. The first two points define the end points of the arc, and the third is a point that the arc passes through. circle-from-center-to-edge cec CORE

mk:@MSITStore:C:\Program%20Files\Datamine\Studio3\Help\DatamineStudio.chm:... 05.11.2010

COMMAND TABLE

. 3 31

Draws a circle with a center point and a radius defined by mouse clicks. circle-from-edge-to-edge circle-with-defined-radius classify-categories Classify categories into scheduling groups. clear-design-window clip-inside-perimeter clip-outside-perimeter clip-to-perimeter cdw cip cop ctp CORE CORE CORE CORE Closes all open files and removes all data loaded into the design window. Delete point and string data inside selected perimeter. Delete point and string data outside selected perimeter. Takes a perimeter (closed string) and, according to the user's choice, deletes all the string and point data from either inside or outside of the perimeter. close-all-strings cla CORE Changes all open strings into closed perimeters by inserting a segment in each to bridge the gap between the end point and the first. All strings in memory are treated in turn. close-background-image Close any currently loaded Design window background image. close-dtm-point-file close-file Close an open Datamine file close-string clrun cl-set-attrib-target This is an internal system command and is not intended for scripting use. cl-set-attribute This is an internal system command and is not intended for scripting use. cl-set-attrib-values This is an internal system command and is not intended for scripting use. cl-set-dest-name This is an internal system command and is not intended for scripting use. cl-set-dest-target This is an internal system command and is not intended for scripting use. cl-set-toggle This is an internal system command and is not intended for scripting use. cl-set-total-target This is an internal system command and is not intended for scripting use. cl-toggle-attribute-prompt This is an internal system command and is not intended for scripting use. colour-selected-switch colour-wf-slice-switch combine-strings tse tsc com CORE WFM CORE Turn on or off highlight colouring of the selected data set. Toggle wireframe slicing to use default or triangle colour. Generates combination of two strings as replacement for, or additions to, both strings. This command will generate a new string from the selected combination of two other strings. condition-string connection-on-grade cond cog CORE UGM Uses the parameters of maximum and minimum chord lengths and a minimum angle to modify a string. CORE SCH CORE SCH SCH SCH CORE clo rcp CORE CORE SCH Takes an open string and creates a closed perimeter by adding a segment linking the last point to the first. Run a command language file of Design window commands. cdtf clf WFM CORE Enter a brief description here - this text will be shown in the COMMAND TABLE when it is created, so keep it as brief as possible. CORE cee cir clc CORE CORE SCH Draws a circle with a diameter defined by two mouse clicks. Draws a circle from a selected center point and radius dimension.

mk:@MSITStore:C:\Program%20Files\Datamine\Studio3\Help\DatamineStudio.chm:... 05.11.2010

COMMAND TABLE

. 4 31

Generates strings between a 3D point and any points on a string which produce a predesignated angle. connect-strings converge-segments conn trc CORE CORE Connects two strings by linking a selected end from each. Removes unwanted string vertices by extrapolating two selected converging strings to their point of intersection, creating a single vertex. convert-wf-hull No description available convert-wireframe-slice convert-wireframe-slice-string copy-file Copy a named file to another named file. copy-ring Copy ring data to the clipboard. copy-string copy-string-attributes copy-wireframe create-drillhole-collars-file create-dtm create-point-in-string create-ramp-string create-road-berm create-road-berm-inside create-road-berm-outside create-road-contour create-road-contour-down create-road-contour-up create-road-line create-road-segment create-road-segment-in create-road-segment-out create-tag-string crest-string-colour Set colour for crest strings in open pit design. cps csa cpw cdhf cdtm cpis crs rbe rbi rbo rcon rcod rcou rli rseg rsei rseo tgs cc CORE CORE WFM CORE WFM CORE CORE OPM OPM OPM OPM OPM OPM OPM OPM OPM OPM WFM OPM Makes a copy of a selected string in a location of your choice. Copies the attributes of one string to another string, or from a string to a group of strings. Interactive command for copying a wireframe and moving the copy to a new location. Creates a drillhole collars table object from the drillholes currently in memory. Make a digital terrain model from a selected (or previously highlighted) strings object. Create data points signifying the common center of gravity of two strings Creates a ramp string according to the supplied parameters. Projects a string horizontally by a berm width to create new string. Projects a string inwardly from the control string by a berm width to create new string. Projects a string outwardly from the control string by a berm width to create new string. Projects a string at an angle to a defined level to create a new string. Projects a string downwards at an angle to a defined level to create a new string. Projects a string upwards at an angle to a defined level to create a new string. Create road edge perimeter around defined centre line. Creates a road outline from a string using a specified gradient and width. Creates a road outline on the inside of a string using a specified gradient and width. Creates a road outline on the inside of a string using a specified gradient and width. Tags specific points to be joined when wireframing strings. cpr RNG csl css cpf WFM WFM CORE Converts a slice through a wireframe into a new string or strings. For setting up to design holes. Converts the selected wireframe slice to a string. hts WFM

mk:@MSITStore:C:\Program%20Files\Datamine\Studio3\Help\DatamineStudio.chm:... 05.11.2010

COMMAND TABLE

. 5 31

crosshair-switch Toggles crosshair display. defdensity-switch define-new-rosette del-blasthole-row delete-all-point-annot No description available delete-dependency-string delete-file Deletes any named database file. delete-from-plot-file delete-points-mode delete-rosette delete-schedule delete-trace-switch delete-wireframe-point Deletes selected wireframe points. deselect-all-blocks Deselect all mining blocks for scheduling. deselect-all-drillholes deselect-all-limits deselect-all-points deselect-all-strings deselect-face Deselect a mine unit. design-background-colour deselect-limit digitise-mode-switch display-drillholes display-eval-results-switch No description available display-wireframe display-wireframe-in-order divide-string

tch pfd nr dbr dpa dde dfi dpl dpo dro dsc tet dpp dab dad dal dap das dfa dli dli dig dh drs dw wfo -

CORE STP CORE STP PTS ACV CORE CORE CORE OPM SCH CORE WFM SCH CORE CORE CORE CORE SCH CORE CORE CORE CORE CORE WFM WFM CORE

Prompts for the default density when evaluating a single outline. Define new rosette (projection angles by azimuth ranges). Delete a row of drillholes created with the blast-layout command.

Delete a scheduling dependency between two mining blocks.

Deletes vertices (points) in selected or any string nearest to cursor. Delete rosette definition from rosette file by cursor selection. Undo mining on all mined units starting from the current period. Toggles whether strings that make up a trace are retained.

Deselects any selected static drillholes in the Design window. Deselects all strings currently selected, which define DTM boundaries. Deselects all points and removes them from the selected data set. Deselects all strings and removes them from the selected set.

Deselects a previously selected DTM limit string. Deselects a previously selected DTM limit string. Toggles between cursor and digitizer input mode. Regenerate the display of drillhole data in the graphics panel.

Display the (filtered) wireframe models held in the wireframe files. Displays a wireframe in a sequence determined by a numeric field from the triangles file. Divides an outline (closed string) into 2 outlines.

mk:@MSITStore:C:\Program%20Files\Datamine\Studio3\Help\DatamineStudio.chm:... 05.11.2010

COMMAND TABLE

. 6 31

drillhole-ann-switch No description available drillhole-bhid-switch No description available drillhole-display-hide Disables the display of drillhole data drillhole-display-show Enables the display of drillhole data drillhole-eohmark-switch No description available drillhole-graph-switch No description available drillhole-icon-switch No description available drillhole-intmark-switch No description available drillhole-sohmark-switch No description available drillhole-tickmark-switch No description available drillhole-to-string Converts drillhole data to string data. drive-evaluation-switch dtm-coordinate-switch dtm-limit-include-switch dtm-new-point-separation dtm-point-check-switch dtm-undo-last-link edit-attributes edit-dh-attributes edit-model-cell-values edit-point-coordinate edit-prate edit-wireframe-attributes end-learn-mode No description available end-link end-link-boundary end-link-selected-strings

taa tba

CORE CORE CORE CORE

tem tag tdhi tim tshm tsti d2s tde tcs tli nps tpc uld eat ed ec epc epr ewa N/A eli elb

CORE CORE CORE CORE CORE CORE CORE UGM WFM WFM WFM WFM WFM CORE CORE MOD CORE SCH WFM CORE WFM WFM WFM

Toggles drive evaluation against a block model. Switches between use of world or view plane for DTM generation. Toggles the use of selected limit perimeters when generating DTM. Controls the separation of additional points in order to improve triangulation. Toggles duplicate point checking during DTM generation. Erases wireframe data created during the last DTM generation. Allows you to change non-location attribute values such as color, line-style and other attributes. Display and edit drillhole sample values manually. Opens a dialog for editing model cell values in the Design Window. Opens a dialog for editing the coordinates of a point or string vertex. Changes the production rate on faces and tonnage zones. Edits the wireframe attributes of selected wireframe data.

Creates wireframe end surface defined by points of selected string. End links an outline made of a perimeter section and bridge string. Create wireframe structures from closed strings.

mk:@MSITStore:C:\Program%20Files\Datamine\Studio3\Help\DatamineStudio.chm:... 05.11.2010

COMMAND TABLE

. 7 31

end-schedule-session end-script-record Terminates a script recording session. erase-all Erases all string data from memory. erase-all-drillholes Deletes all drillholes from memory. erase-all-points erase-drillhole No description available erase-ring-holes Erase selected ring holes. erase-string Erases a single string from memory. erase-wireframe erase-wireframes erase-wireframe-surface No description available evaluate-1-string evaluate-2-strings evaluate-all-strings evaluate-current-wireframe

qsc esr eal ead eap esd reh ers erw eaw ews ev1 ev2 eva

SCH CORE CORE CORE CORE CORE RNG CORE WFM WFM WFM CORE CORE CORE CORE

Exits from Mine Production Sequencing session.

Unloads all points currently loaded into memory and displayed. Also deletes all filtered points.

Erases data for the selected group from current wireframe objects. Erase all (filtered) wireframe data from current wireframe files.

Evaluate string by projecting perpendicular to view. Evaluate wireframe produced by linking two strings. Evaluate all strings by projecting them perpendicular to the view. Evaluate the current wireframe above and/or below the current specified limit. evaluate-wireframe evaluation-control evsource-blockmodel-switch evsource-drillhole-switch Turn on the use of drillholes in evaluations. extend-string extend-string-to-string extra-attribute To do fast-string-evaluation-switch No description available fillet-string-points fillet-string-points-berm filter-drillholes filter-model-file spf spbf fdh fm CORE CORE CORE CORE Specify the maximum curvature radius permitted between line segments on a selected string. Points will be added to the line. Specify the maximum curvature radius permitted between line segments on a selected berm string. Points will be added to the line. Turn on or off display and use of drillholes based upon filters. Turn on or off display and use of cell model based upon filters. ffe CORE ext ess +a CORE CORE CORE Extends a string by adding new points to its end point. Extends a string from its end point, using the bearing and dip of the final segment, to a point where it meets another selected string. evw evp umd udd WFM SCH CORE CORE Evaluate above or below DTM or within wireframe. Set controls for automatic evaluation during mining face advance. Turn on the use of the cell model in evaluations.

mk:@MSITStore:C:\Program%20Files\Datamine\Studio3\Help\DatamineStudio.chm:... 05.11.2010

COMMAND TABLE

. 8 31

filter-points filter-string-off filter-strings filter-wireframe-points filter-wireframe-triangles fit-cross-section fit-elevation Fit elevations of drive outline perimeter. full-cell-evaluation-switch generate-outlines get-all-strings get-drillholes get-points get-view get-wf-data grid-interval-on-string group-select-box-switch group-selection-display group-select-pick-switch gvp-bmodel-render-switch gvp-cells-update-switch gvp-dhole-update-switch gvp-gouraud-switch gvp-model-cells-switch gvp-modelpc-update-switch gvp-model-plane-switch No description available gvp-modelp-update-switch gvp-model-wf-switch

fp fs fs fwp fwt fx fe fce ou ga gd gp gvi gw ipg ggbs sed ggps tvsb tvumc tvud tssh tvsc tvupc tvsp tvump tvsm

CORE CORE CORE WFM WFM UGM CORE CORE CORE CORE CORE CORE CORE CORE CORE CORE CORE CORE GVP GVP GVP GVP GVP GVP GVP GVP GVP

Toggles display of point data based on filter expressions created in the Object Expression Builder. Prevent the display of a string without removing it from memory. Toggles the display of strings according to defined filters. Turn on or off display of wf points based on filters. Turn on or off display of wf triangles based on filters. Fit drive cross-sections to underground survey strings.

Turn on or off full cell evaluation of a block model. Replace crossing strings with perimeters outlining adjacent areas. Load all (filtered) strings from a named string file. Read data from a drillhole file with optional Input filter. Get points into memory from a named points file. Resets view using previously saved view parameters on section file. Get data from supplied wireframe triangle and point files. Make new string vertices, based on XYZ grid intersections. Toggles the use of dragged rectangles in data selection routines. Set parameters for the display of the selected data set. Toggles the use of single cursor clicks in data selection routines. Toggles the fill styles for block models in the Visualizer window. Toggle on or off whether block model cells will be updated in the Visualizer window. Toggle on or off whether drillholes will be updated in the Visualizer window. Toggle on or off smooth (Gouraud) shading in the Visualizer window. Toggle on or off the display of block model cells in the Visualizer window. Toggle on or off whether the model cloud will be updated in the Visualizer window.

Toggle on or off whether model planes will be updated in the Visualizer window. Toggle the display of block model data through wireframe data in the Visualizer window.

mk:@MSITStore:C:\Program%20Files\Datamine\Studio3\Help\DatamineStudio.chm:... 05.11.2010

COMMAND TABLE

. 9 31

gvp-modelwf-update-switch gvp-point-cloud-switch gvp-point-cloud-switch gvp-point-display-switch gvp-point-update-switch gvp-set-background No description available gvp-set-params gvp-string-display-switch gvp-string-update-switch gvp-unload-planes-switch No description available gvp-wf-display-switch gvp-wframe-render-switch gvp-wf-update-switch hide-non-selected-strings infill-between-holes insert-adjacent-hole insert-at-intersections insert-by-segment-length insert-hole-by-toe Inserts a hole by locating the toe. insert-multiple-adjacent No description available insert-offsets No description available insert-parallel-hole insert-point-segment-center insert-points-mode No description available insert-setoff-hole insert-setoff-interactive insert-slot-expanders

tvumw tvua tvul tvsp tvupo sbc dip tvss tvus tvun tvsw tvsr tvuw hnss inf iah ii ibl ibh ima iof iph ipsc ipo ish isi ise

GVP GVP GVP GVP GVP GVP GVP GVP GVP GVP GVP GVP GVP CORE RNG RNG CORE CORE RNG RNG CORE RNG CORE CORE RNG RNG RNG

Toggle on or off whether the model with wf will be updated in the Visualizer window. Toggles point annotation in the Visualizer window. Toggles model point cloud display in the Visualizer window. Toggles point data display in the Visualizer window. Toggle on or off whether point data will be updated in the Visualizer window.

Set various parameters that affect the display of data in the Visualizer window. Toggles string data display in the Visualizer window. Toggle on or off whether string data will be updated in the Visualizer window.

Toggles wireframe data display in the Visualizer window. Activate the redrawing of wireframe data in the Visualizer window. Toggle on or off whether wireframe data will be updated in the Visualizer window. Disables the display of all non-selected string data. Creates underground blast design with hole collars and toes interpolated between existing holes. Inserts a blast hole adjacent to an existing hole for designing fans of holes. Inserts string vertices at intersections with other strings. Inserts new vertices into a string, a fixed defined distance apart, between selected points.

Insert a new drillhole parallel to a selected hole. Creates a point at the mid-point of a selected string segment.

A setoff hole is a hole adjacent to an existing hole but offset by a specified distance. A setoff hole is a hole adjacent to an existing hole but offset by a specified distance. Design underground blast holes to expand slot raise.

mk:@MSITStore:C:\Program%20Files\Datamine\Studio3\Help\DatamineStudio.chm:... 05.11.2010

COMMAND TABLE

. 10 31

insert-wireframe-point interactive-dh-editor keep-combined-switch link-area-method-switch link-boundary link-boundary-to-line link-complete-drive link-crossover-switch link-drive-ends link-drive-in-segments No description available linking-method-switch link-outline-pair link-outline-pair-attribute

iwp de ko tma lbo lbl ldr tlc lde lds tlm l2 l3

WFM CORE CORE WFM WFM WFM UGM WFM UGM UGM WFM UGM UGM

Interactive command for inserting points in a wireframe. Interactive tool for viewing, modifying and compositing dh samples. Toggles whether strings used for combining are retained. Select minimum surface area as the string linking criteria. Link together two strings honouring any bridge or tag strings. Create a wireframe link between a string boundary and a line. Create drive wireframe co-axially around drive control string. Toggle crossover checking on or off for string linking. Create drive wireframe, with separately defined ends.

Toggle between optimal and sub-optimal (fast) linking methods. Create wireframe from a pair of drive roof and floor strings. This is a powerful tool which enables multiple strings with a common attribute to be linked together in a single action to create a wireframe. link-quad link-radii-method-switch link-selected-string-el-switch Toggles the ability to end link selected strings. link-selected-strings-attrib link-selected-strings-plane link-selected-strings-point link-shape-method-switch link-single-outline link-strings link-to-line list-evaluation-switch lock-bhole-plane-switch make-the-dtm maximum-separation tpr l1 ls ll tlev lh md mse WFM WFM WFM WFM UGM WFM WFM SCH STP WFM WFM Links selected strings to form a solid wireframe, after sorting on a selected numeric attribute which determines the linking order. Links selected strings to form a solid wireframe, after sorting by plane which determines the linking order. Links strings to form a solid wireframe. The linking order is determined by the proximity of the center-points of each string. Select proportional length as the string linking criteria. Create wireframe from a drive outline string and supplied height. Creates wireframe links using the points on two selected strings. Creates wireframe link between a closed string (perimeter) and a line. Toggle switch for listing of evaluation data during scheduling. When moving blast holes, this command controls whether they are maintained on the original plane. Creates a DTM, using selected strings and/or points and values defined by other commands. lq tea WFM WFM WFM Create a wireframe link using points on selected segments of two strings. Select equi-angular shape as the string linking criteria.

mk:@MSITStore:C:\Program%20Files\Datamine\Studio3\Help\DatamineStudio.chm:... 05.11.2010

COMMAND TABLE

. 11 31

Specify a maximum separation of data points to be used in the DTM. merge-hole-point-with-perimeter Merge an existing blast hole point with a perimeter string. merge-string-segments Joins string segments with shared ends. merge-strings-to-file Merge all loaded string data to a single object in memory. mine-face Mine face or tonnage zone. mine-tonnes-target mirror-string model-display-plane model-display-wireframe No description available model-plane-switch model-plane-hide Disable the view of the current block model. model-plane-show Enable the view of the current block model. model-wf-display-switch modify-annot-settings modify-blast-hole-charge Modify the length of a drillhole charge column modify-blast-hole-length move-blasthole Move a drillhole. move-blasthole-row move-blast-hole-toe move-drillhole-toe move-plane move-plane-backward Moves the current view plane backward. move-plane-forward Moves the current view plane forward. move-points-mode move-string Moves a selected string interactively. move-string-section move-wireframe move-wireframe-point mss mw mpw CORE WFM WFM Moves a selected string segment, redrawing the adjacent segments to accommodate the new location of the segment. Interactive command for moving a wireframe. mpo mo CORE CORE Interactively moves points and string points in the Design Window. mpf CORE mbr mbt mto mpl mpb STP RNG STP CORE CORE Move a row of drillholes created with the blast-layout command. For modifying the toe position of a selected blast hole using the mouse. For modifying the toe position of a selected drillhole using the mouse. Moves the current view plane a specified distance. mbl mbl RNG STP Modifies the length of a designed underground blast drillhole. tmw mis mbc MOD RNG RNG Toggles automatic cell model display with current wireframe. Modify the settings of any existing annotation. MOD tbm MOD MOD Toggle on or off automatic cell model display in view plane. mtt smm tpl twfr SCH CORE MOD MOD Mine face to achieve a supplied target tonnage. Draws a mirror image of a single existing string, reflected about a defined mirror plane. Display cell model intersection with current view plane. msp SCH CORE mrs CORE RNG

mk:@MSITStore:C:\Program%20Files\Datamine\Studio3\Help\DatamineStudio.chm:... 05.11.2010

COMMAND TABLE

. 12 31

Interactive command for moving a wireframe point. multiple-mine multiple-wireframe-slice multiple-wireframe-split new-points new-string new-string-attribs-snap-switch new-triangle Enables triangle creation mode. new-wireframe No description available next-ring-plane offset-inside-string Create a new string at a specified offset. offset-outside-string Expand a string by a specified distance. offset-string open-all-strings Turn all perimeters into open strings. open-background-image Loads a bitmap image as a background into the Design window. open-file Open a named file in Studio 3. open-model-file Open a model file. open-results-file Open a results file. open-rosette-file Open a rosette file for open pit design. open-section-file Open a section definition file. open-string Turn a perimeter into an open string. open-validation-file Open a validation file. open-visualiser-window Opens the Visualizer window. outl-deselect-outer outline-batch-switch Toggle for generation of all possible outlines. outline-drive-in-segments Help topic in development. outline-selection-switch outl-limit-switch tsin uo CORE STP Toggle for individual selection of new outlines. UGM dol trs STP CORE Deselect all outer limits used for outline generation. vo GVP ova STP ost CORE ose CORE oro CORE ore CORE om CORE of CORE CORE exp oa CORE CORE Creates a new string by offsetting the selected string by a specified distance in the view plane. oos CORE rnp ois RNG CORE Set the view to next or previous ring plane along survey string. nwg WFM mm msl mus npo ns asw ntr SCH WFM WFM CORE CORE CORE WFM Repetitively mine face or tonnage zone for a set number of periods. Generate slices through wireframe at given interval. Splits a solid wireframe into several parts using parallel planes, a set distance apart. Defines new points interactively in the Design Window. Defines new strings interactively (digitizes) in the Design Window. Toggle the states for the derivation of attributes for new string points.

mk:@MSITStore:C:\Program%20Files\Datamine\Studio3\Help\DatamineStudio.chm:... 05.11.2010

COMMAND TABLE

. 13 31

Control whether new outlines, are generated within an outer limit. outl-plane-switch outl-select-outer pan-down-graphics pan-graphics pan-left-graphics pan-right-graphics pan-up-graphics paste-ring To do pick-inner-limit pick-inner-limit pick-outer-limit plane-by-one-point plane-by-three-points plane-by-two-points point-annotation Define annotation used for point data. point-display-switch point-display-show Enable the display of point data in the Design window. point-display-hide Disable the display of point data in the Design window. points-per-string To do presplit-layout previous-selection Toggle back to the previously selected data. prev-ring-plane progress-monitor-switch project-points-to-wf project-points-to-wf-angle project-points-to-wf-in-view project-points-to-wireframe rpp pmo ptp pta pti RNG CORE CORE CORE CORE CORE Set view to next or previous ring plane along survey string. Toggles the use of the progress monitor when running commands. Project a point or points onto a wireframe surface directly downwards, regardless of whether the wireframe is in current view or not. Project points onto a wireframe at the specified projection angle. Project selected points onto a wireframe surface that is lying directly behind the selected points, along the line of sight. lp pse STP CORE Layout a presplit line of holes within a perimeter. spp CORE CORE spo CORE CORE psp sil sol 1 3 2 spa CORE CORE CORE CORE CORE CORE CORE Toggle between perspective and isometric projections of the data. Select a string that is to define an inner limit (hole) of the DTM. Select a string that is to define an outer limit of the DTM. Select view plane based on one point and orthogonal orientation. Select a new view plane by defining three points. Select a new view plane by defining two points. ftp ool N/A pan N/A N/A N/A par STP STP CORE CORE CORE CORE CORE RNG Control whether new outlines, are generated on the current view plane. Select an outer limit to be used when outlines are generated. Shift the contents of the Design window downwards Translates the current display in the view plane. Shift the contents of the Design window to the left Shift the contents of the Design window to the right. Shift the contents of the Design window upwards

mk:@MSITStore:C:\Program%20Files\Datamine\Studio3\Help\DatamineStudio.chm:... 05.11.2010

COMMAND TABLE

. 14 31

Project a point or points onto a wireframe surface directly downwards, regardless of whether the wireframe is in current view or not. project-string-at-angle project-string-onto-wf project-string-onto-wf-in-view Project a string along the line of view onto a visible wireframe surface. project-string-onto-wf-limit project-to-view-plane Project a string onto the current view plane. query-lines query-points query-rosette Report values of selected rosette. query-single-point Query individual point data. query-string query-string-between-points query-triangle ramp-between-2-points ramp-by-three-points ramp-curve-fit rapid-digitize-switch read-visualiser-view rectangle-from-center-to-corner rectangle-from-corner-to-corner redraw-display Redraws the current screen display. redraw-strings-in-order reduce-points reduction-percentage reference-points remove-string-crossovers rename-drillhole Interactively rename drill holes. rename-ring-holes rnr RNG rso red pre pre tcr rnd CORE CORE CORE CORE CORE CORE Redraw string data in the order determined by each string's drawing order. Reduces the number of points in a string by a percentage Used in conjunction with the reduce-points command. Specifies the percentage reduction. Defines a new set of digitizer reference points for calibration purposes. Removes string crossovers in the current view plane. qst qsb qt r2 r3 rcf rap rvv rcec rcce rd CORE CORE WFM UGM UGM UGM CORE GVP CORE CORE CORE Report on a selected string's properties and values. Queries the statistics of a string section defined by a start and an end point. Give statistics and attribute values for a selected triangle. Make ramp connecting two points, according to supplied criteria. Make ramp joining three points, defined by the start, end and an interactively defined third point. Modify string so that its end tangentially fits another string. Toggles the capability to incorporate sections of other strings in a new string. Reads the azimuth and dip of the current visualizer view and applies them to the Design window view. Draws a rectangle with a center point and a corner point defined by mouse clicks. Draws a rectangle with two diagonally opposite corners defined by mouse clicks. qsp CORE ql qp qr CORE CORE OPM Give statistics for a line defined by two selected points. Give location and attribute values for a selected point. ptl ptv CORE CORE Enables a string to be projected onto a wireframe using minimum and maximum distances to control up and down projections. pro ptw CORE CORE CORE Project string according to angle defined by rosette or model slope. Project string vertically to intersect with wireframe surface.

mk:@MSITStore:C:\Program%20Files\Datamine\Studio3\Help\DatamineStudio.chm:... 05.11.2010

COMMAND TABLE

. 15 31

Interactively rename blast holes. reset-view No description available resolve-string-points results-annotation reverse-string Reverse selected string point order. reverse-view Reverse the current view direction. rings-edit-hole-params-switch rings-move-drill Reposition the drill relative to the rig center. rings-move-rig Move the drill rig within the drill drift outline. rings-position-rig rings-rig-reversed-switch Toggles rig direction. rings-save-design-planes rings-toe-snap-to-design-switch rings-toe-spacing-marker-switch road-berm-offset-percentage To do road-berm-taper-switch No description available road-design-string-pair road-design-string-single road-interpolation-step To do road-outline-intersection Creates an intersecting road layout from two intersecting strings. road-string-colour Set colour for road strings in open pit design. roof-string-colour rotate-string rotate-string-by-angle rotate-string-to-azimuth rotate-view run Run a scripted common language (CL) file. save-view svi CORE roc rst rsn rsa rov UGM CORE CORE CORE CORE CORE Set colour for roof strings in underground mine design. Rotates a string interactively about a fixed anchor point. Rotates the selected string(s) in the current view plane about a selected point by a specified angle. Rotates a string about a selected point in the current view plane to a specified azimuth. Rotates the view plane about a user-selected center point. rcol OPM UGM rbc rfc OPM OPM OPM Generate a road design string between two existing contours. Generate a road design string from an existing perimeter. OPM rsp rtds rtss RNG RNG RNG OPM Create a Section Definition file from strings intersecting the view plane (rings-save-design-planes). Toggles the use of snapping when positioning hole toe positions. Toggles the use of snapping when positioning toe space markers. rpr rrrs RNG RNG Determine if a drill rig can be brought into position in plan view. rmr RNG reps rmd RNG RNG Toggle the display of the Drillhole Parameters dialog on drillhole creation. vwr CORE resp awr rev CORE SCH CORE Resolves points from one string onto those of another string within a defined tolerance. Annotate perimeters with corresponding field value in results file. rvi CORE

mk:@MSITStore:C:\Program%20Files\Datamine\Studio3\Help\DatamineStudio.chm:... 05.11.2010

COMMAND TABLE

. 16 31

Saves the current view plane parameters to a section file. scale-symbol-switch Turn on or off world size scaling of symbols. scale-wireframe sched-field-treatment scheduling-control Control of scheduling face progression. select-all-blocks Select all mining blocks for scheduling. select-all-drillholes select-all-points select-all-strings select-attribute To do select-block-zone To do select-cross-section select-drillhole-data-switch select-existing-setup To do select-face Define a new mining face. select-grid Specify the appearance of the Datamine grid. select-inner-face select-mining-blocks select-perimeter select-point-data-switch select-points Select points to modify the selected data set. select-ring-design-limit select-ring-drill-drifts select-string Select/deselect string for further operations. select-string-data-switch select-string-from-file No description available select-wireframe sequence-numbers sw seqn WFM CORE Select the current wireframe group and surface prior to linking. sss ssf CORE SM1 Toggles the inclusion/exclusion of string data during data select commands. srdl srdd N/A RNG RNG CORE Selects the design (stope) limit for a ring design plane (select-ring-design-limit). Select the outline of the drilling drift for a ring design plane (select-ring-drill-drifts). sfa smb spe spd spn SCH SCH CORE CORE CORE Select and define face mine unit or activate mine tonnage zone. Select mining blocks for scheduling and blending. Select a closed string to make it the current string. Toggles the inclusion/exclusion of point data during data select commands. sgr CORE sff SCH scs sdd sres UGM CORE RNG Select drive cross-sections for underground mine design. Toggles the inclusion/exclusion of drillhole data during data select commands. sbz SCH sad sap sas sat CORE CORE CORE CORE Selects all drillholes and adds the data to the selected data set. Select all points and add to them to the selected data set. This command adds all available strings to the selected set. sab SCH pss ftr fam WFM SCH SCH Interactive command to scale a wireframe on one or more axis directions. Define how field values are treated when mining units are scheduled. pss CORE

mk:@MSITStore:C:\Program%20Files\Datamine\Studio3\Help\DatamineStudio.chm:... 05.11.2010

COMMAND TABLE

. 17 31

Activates a series of sequence numbers in relation to a specific object attribute, to be used in other processes (e.g. scheduling, visualizer animations etc.) sequence-strings-plane To do sequence-strings-points To do set-adjustment-cut-off set-adjustment-method-switch set-attribute-control set-berm-width Define berm width for road design. set-calendar Set calendar for production scheduling. set-character-size Set character size for the data screen. set-default-catg-dest set-design-parameter Used to set other design parameters. set-dhevaluation set-exposure-limits set-face-advance-method Set advance method for mining faces. set-face-angle set-field-output-status Write an attribute field to a file type. set-gradient-convention set-near-far set-ore-categories Define categories as ore or waste. set-panel-field-format set-projection-distance No description available set-ramp-segment-length set-rosette-power set-scale-factor Set the exaggeration settings for the Design window set-scheduling-screen set-snap-grid-parameters set-snap-grid-switch Set snap mode to grid snapping. ssc gs stg SCH CORE CORE Set up screen layout for scheduling and blending. Set the grid intervals and origin for grid snapping. rsl srp UGM OPM CORE Set segment length to be used when making ramps. Set the inverse power of distance used for weighting rosette values. pfo prj SCH CORE Specify format of figures shown in scheduling panels. grc scl soc CORE CORE CORE Set gradient unit and up/down convention for ramp-related commands. Set near (out of screen) and far (into screen) clipping limits. fan N/A CORE CORE Set standing angle for string projection during road design. sep exl adm CORE SCH SCH Modify parameters for compositing and/or evaluation of drillholes. Set clipping limits for shading of unscheduled blocks. cad N/A SCH CORE Set default destination for scheduling category. csi CORE sca SCH scu am atc sbw CORE CORE OPM OPM Set cut-off grade for adjusting string to ore boundary. Toggle between using cut-off grade and filters for string adjustment. Specify an attribute (field) in the current object to control offsets and offset angles. seqo CORE seqp CORE

mk:@MSITStore:C:\Program%20Files\Datamine\Studio3\Help\DatamineStudio.chm:... 05.11.2010

COMMAND TABLE

. 18 31

set-snap-lines-switch Set snap mode to line snapping. set-snap-lines-switch Set snap mode to line snapping. set-snap-mode set-snap-none-switch set-snap-points-switch Sets snap mode to point snapping. set-snap-points-switch Sets snap mode to point snapping. set-step-distance set-symbol-size No description available set-tolerance set-to-previous-view set-visualiser-replay-name shade-blocks-switch shade-blocks-switch shade-periods-switch shade-selected-switch show-selected-data-switch show-dependencies show-exposure-switch slice-wireframe smooth-gradient smooth-string snap-always-switch Toggles the mechanism for snapping to data. snap-to-drillhole-data-switch No description available snap-to-drillhole-data-on

stl stl snm sn0 stpo stpo ssd ssi sto pv N/A incs shb shp shs tssd sde ses slw smg sms sna stpd

CORE CORE CORE CORE CORE CORE CORE CORE WFM CORE GVP STP SCH SCH SCH CORE ACV SCH WFM CORE CORE CORE CORE CORE CORE

Enables the use of snapping to the grid during data selection and digitizing. Disables the use of snapping during data selection and digitizing operations.

Set adjustment distance for string movement during ore outlining.

Set matching tolerance for points to be used in the DTM. Change the Datamine view to the previous orientation. Specify the name of the active Visualizer replay file. Define the define increments used in Underground Blast Design. Turn on or off the shading of scheduled blocks. Control Shading of blocks for all periods or up to current period. Turn on or off shading of selected perimeters. Show the current dependencies graphically by the use of arrows. Show the current dependencies graphically by the use of arrows. Turn on or off the shading of unscheduled blocks to identify exposure. Display a section through a wireframe in the view plane. Smooth part of a string to a consistent gradient. Smooths a string by parabolic blending which inserts new points between existing pairs of points.

Enables snapping of the cursor position to nearby drillhole data points. snap-to-drillhole-data-off Disables snapping of the cursor position to nearby drillhole data points. snap-to-mid-string-switch snap-to-perpendicular-switch Toggles perpendicular snapping. stms stpe CORE CORE Disables snapping of the cursor position to nearby mid-string positions.

mk:@MSITStore:C:\Program%20Files\Datamine\Studio3\Help\DatamineStudio.chm:... 05.11.2010

COMMAND TABLE

. 19 31

snap-to-plane snap-to-point-data-switch No description available snap-to-point-data-on

stpl stpp

CORE CORE CORE CORE

Move the current view plane to a parallel plane through a point.

Enables snapping of the cursor position to nearby point data. snap-to-point-data-off Disables snapping of the cursor position to nearby point data. snap-to-string-data-switch No description available snap-to-string-data-on Enables snapping of the cursor position to nearby string data. snap-to-string-data-off Disables snapping of the cursor position to nearby string data. snap-to-wireframe-data-switch Snap to point data. snap-to-wireframe-data-on Enables snapping of the cursor position to nearby wireframe data. snap-to-wireframe-data-off Disables snapping of the cursor position to nearby wireframe data. square-from-center-to-corner square-from-center-to-edge square-from-corner-to-corner square-from-edge-to-edge start-learn-mode start-script-record No description available status-panel-switch stereo-close Close the Datamine Stereonet viewer. stereo-open Open the Datamine Stereonet viewer. stop-mining Make active mining unit inactive. string-display-switch No description available string-display-show Enable the display of string data in the Design window. string-display-hide Disable the display of string data in the Design window. string-to-drillhole Convert a string to a drillhole. string-to-road string-trace string-with-interpolation To do stro stra stri CORE CORE CORE Creates a road outline from a highlighted single road design string. Create a new string from intersecting portions of selected strings. stdh CORE CORE CORE dst CORE stm SCH osw SNV tsp csw CORE SNV Toggles status panel display when Studio 3 is started up. stc sce scc see N/A ssr CORE CORE CORE CORE CORE CORE Draws a square with a center point and a corner point defined by mouse clicks. Draws a square with a center point and an edge point defined by mouse clicks. Draws a square with one corner defined by a mouse-click and the diagonal length defined by a second mouse-click. Draws a square with a side length defined by selecting points on opposite edges. Turn on storage of Datamine commands to named command language file. CORE CORE stpw CORE CORE CORE stps CORE

mk:@MSITStore:C:\Program%20Files\Datamine\Studio3\Help\DatamineStudio.chm:... 05.11.2010

COMMAND TABLE

. 20 31

superimpose-plot system-command Interface to the operating system. tag-string-colour Set colour of tag strings used in wireframing. toggle-attribute-prompt translate-string translate-wireframe trim-to-string Trim strings against a selected control string. uncharge-blastholes Uncharge selected blast holes. undo-last-link No description available undo-last-string-edit undo-mining Unschedule a mined unit. unlink-string Remove links from the selected string. unlink-triangle unlink-wireframe unload-all-data unload-all-visualiser-data unschedule-period unsuperimpose-plot Remove a superimposed plot file. update-visualiser-animation update-visualiser-objects No description available update-visualiser-view update-visualiser-view-switch use-clipping-switch Turn on or off data clipping limits. use-dependency-switch use-modelfile-switch use-quick-commands-switch No description available use-rosettes-switch

sup osy taco toga tra trw tri ubh ull ule umi ust utr uw ua ula unpe unpl uuv uv vv avv uc ude tum

CORE CORE WFM CORE CORE WFM CORE RNG WFM CORE SCH WFM WFM WFM CORE GVP SCH CORE GVP GVP GVP GVP CORE ACV CORE CORE

Superimpose a plot file on the current Datamine view.

Toggles the display of the attribute prompt when digitizing string points. Translates a selected string by an ordained distance in each of the X, Y and Z directions. Interactive command for translating a wireframe a defined distance in any or all of the axes directions.

Undo last modification made during string editing.

Erase data for the selected triangle from current wireframe files. Remove a selected link from the wireframe data. Unloads all currently loaded data from memory, and clears the Design window view. Clears the Visualizer window but the data remains loaded in memory and visible in the Design window. Undo mining on all mined units back to specified period.

Specify the data column containing the animation sequence for the Visualizer animation.

Reset the Visualizer view to current Design view. Toggles the update of the display when the Visualizer window is updated.

Turn on or off the use of any open dependency file. Turn on or off use of model slope in string projection.

tur

OPM

Turn on or off use of rosettes in string projection.

mk:@MSITStore:C:\Program%20Files\Datamine\Studio3\Help\DatamineStudio.chm:... 05.11.2010

COMMAND TABLE

. 21 31

use-tag-switch validate-onthefly-switch vertical-length-switch view-along-string view-to-plot visualiser-axes-switch visualiser-light-control wall-string-colour wall-strings-switch wf-attr-from-str-switch wf-boundary-line-switch wf-convert-line-switch wf-display-show

uta auv plv vas vf xsw li wc twss tsa twvb twcl

WFM STP STP RNG CORE GVP GVP UGM UGM WFM WFM WFM WFM WFM

Toggle the use of tag strings on or off for string linking. Use a validation file. opened with the open-validation-file command. Control whether the HLENGTH field in a blast patterns file is an actual or vertical length. Setup ring planes using survey lines, showing a view perpendicular to a string segment (view-along-string). Change the current Datamine view to that of a particular plot file. Toggles the display of axes indicators in the Visualizer window. Change the direction of the lighting source in the Visualizer window. Set colour for wall strings in underground mine design. Turn on or off the generation of wall strings during drive linking. Toggle the source of wireframe attributes from strings or user. Toggle the display of wireframe open edges on or off during verify. Toggle the conversion of displayed lines to strings in wireframe verify. Turns on the display of all wireframe overlays. wf-display-hide Turns off the display of all wireframe overlays. wf-intersect-line-switch wf-display-switch wf-hull-switch No description available wf-intersections wf-intersection-switch wf-merge-line-switch wf-pid-check-switch wf-select-attribute-switch wf-select-file-switch wf-select-filter-switch wf-select-group-switch wf-select-surface-switch wf-sf-value-switch sfi tiw tmvm twcd sba sbfi sbfl sbg sbs twn WFM WFM WFM WFM WFM WFM WFM WFM WFM WFM Takes two wireframes and creates string outlines where they have triangles that intercept. Turn on or off wireframe intersection when projecting string. Toggle the display of wireframe shared edges on or off during verify. Toggle the checking of duplicate points on or off during verify. Control the selection of wireframe data by user attributes. Control the selection of wireframe data by file names. Control the selection of wireframe data by user defined filters. Control the selection of wireframe data by picked wireframe group. Control the selection of wireframe data by picked wireframe surface. Toggle the renumbering of wireframe surfaces off or on during verify. twvi twd whu WFM CORE WFM Toggle display of crossovers between wireframe surfaces during verify. Turn on or off automatic display of wireframes.

mk:@MSITStore:C:\Program%20Files\Datamine\Studio3\Help\DatamineStudio.chm:... 05.11.2010

COMMAND TABLE

. 22 31

wireframe-difference

wdi

WFM

The Difference operation takes two solid wireframe objects and creates another wireframe object which represents the first wireframe with any volume shared with the second wireframe removed. wireframe-extract-separate wireframe-intersection qk win WFM WFM Creates separate wireframes or strings for each logically discrete piece of a two wireframe interaction. The Intersection command takes two wireframe objects and creates a new wireframe object representing their overlapping (common) volume. wireframe-merge wireframe-solid-hull wireframe-split wme soh spli WFM WFM WFM

Finds the outer surface of overlapping solid wireframes. Splits a solid wireframe into two parts using a plane which can be: the view plane; a plane specified by azimuth, inclination and a reference point; or a plane picked using the pointer. wireframe-surface-merge wireframe-surface-project wireframe-union udt pdv wun WFM WFM WFM Surface operation to update one wireframe DTM surface with another. Projects the boundary of the selected DTM to a specified plane, at an angle perpendicular to that plane. The Union operation takes two solid wireframe objects and creates a single wireframe with the same surface appearance and characteristics as the two component wireframes together. wireframe-verify wvf WFM The wireframe verification command checks the chosen wireframe for duplicate points,faces and cross-overs according to the options specified. wireframe-volume write-all-strings Write all strings to a named string file. write-drillholes write-points Write all point data to a named points file. write-selected-strings write-single-string write-wf-data Save wireframe data to an external .dm file. xsec-string-colour x-sections-switch zoom-all-extents zoom-all-graphics zoom-graphics Zooms in on the display. zoom-out Zooms the display out. Studio 3 Processes Process Name ACCMLT Module CORE Description Accumulates sub-totals for up to 25 numeric fields, for constant values of a keyfield. zz CORE csc tdx ze za zx UGM UGM CORE CORE CORE Set colour for drive cross-section strings in underground design. Turn on or off retaining of drive cross-sectional perimeters. Resets display limits to show all data in the current view plane. Resets display limits to contain all currently displayable data. wrs ws ww CORE CORE CORE Save currently highlighted (selected) string data to an external .dm file. Saves a single, selected string as a separate file. wdh wp CORE CORE Write drillhole data to a file with optional Output filter. wvo wa WFM CORE Reports the volume of a solid wireframe, or the volume enclosed by a plane above or below a DTM.

mk:@MSITStore:C:\Program%20Files\Datamine\Studio3\Help\DatamineStudio.chm:... 05.11.2010

COMMAND TABLE

. 23 31

ADDDD ADDMOD ADDTRI AED ALFNUM ANOVA1 ANYJOI APPEND ASTRAN ATTCHK ATTSET AUTOCR

CORE MOD WFM CORE CORE CORE CORE CORE CORE CORE CORE GXS

Adds extra fields to a file, requesting the field names and parameters interactively, in the same way as that used for entering a new Data Definition. Adds two models together by superimposing one onto another. Combines two pairs of wireframe model files, into a single pair of output files. File editor for creation, validation and modification of files. Copies a file while converting given alphanumeric fields to numeric. Carries out one-way analysis of variance on groups of replicate values of a numeric field in a file. No description available. Appends two or more files together. This process reads one or more ASCII sample assay files in SIF format and updates a DATAMINE database file by matching sample numbers. Up to 10 grade fields may be updated from each file. The ATTCHK process is used to check the legend definition file prior to running ATTSET. No description available Auto-correlation analysis is used to quantify and define anomalous thresholds and halo size on regularly grided soil sample lines. AUTOCR can also be used to measure dispersion limits in stream sediments, as long as fixed distances are used for sampling. Back-transforms data from a normal distribution. It is based on the GSLIB code for normal score back transformation (backtr). No description available. This command counts the number of boreholes used to estimate each model cell. This information can then be used to assist in assigning a reserve category to the model cells. Creates a set of perimeters around blocks in a model file. No description available. No description available Canonical analysis can be used to define possible mineralized and background samples by the calculation of canonical vectors and scores on the basis of two variates, left (mineralized) and right (background). No description available. Provides a general three-dimensional coordinate rotation and translation capability within Studio 3. This process transforms data into a suitable format for creating charts and optionally creates and displays a draft quality plot. This process carries out validation checks on string data. Checks wireframe point and triangle files. Fields are clustered (R-mode) into groups on the basis of the correlation matrix to simplify the structure. The process calculates the centre point and the dip and dip direction of each triangle in a wireframe. Composites drillhole data over horizontal benches. Composites drillhole data over horizontal benches, with additional computation of a recovered grade and recovered fraction for a specified field at a given cut-off. Composites drillhole data down each drillhole. By use of retrieval criteria and a very large compositing interval, COMPDH can also composite over rocktypes or seams. No description available. Composites drillhole data by optimizing the composite interval using ore and waste criteria. Generates a file that contains summary results from a number of different RESULTS files, that have been produced by processes such as MODRES or TRIVAL. Create a convex polygon around an X,Y point data set. Generates a contour plot file from an orebody model. Generates contours from a block model and stores them in three dimensional format into a string file. Copies any file within the database from the input file to the output file. Copies a database file to a new file with the addition of a field for the record (line) number. No description available. Calculates bivariate statistics on pairs of numeric fields in a file.

BACKTR BETA BHCOUNT BLKPER BLKTRI CALEND CANON

CS CORE CORE MOD WFM SCH GXS

CASCRIPT CDTRAN CHART CHECKIT CHKTRI CLUSTR COGTRI COMPBE COMPBR COMPDH COMPEV COMPSE COMRES CONPOL CONTOU CONTST COPY COPYNR COPYOU CORREL

CORE CORE CORE CORE CORE GXS CORE CORE CORE CORE STP CORE SCH CORE MOD MOD CORE CORE CORE CORE

mk:@MSITStore:C:\Program%20Files\Datamine\Studio3\Help\DatamineStudio.chm:... 05.11.2010

COMMAND TABLE

. 24 31

COUNT COZONE

CORE MOD

Outputs a file containing each different value of a set of keyfields, and the number of occurrences of each value. The process allows the user to investigate the relationship between mining parameters (bench height, minimum mining width, direction of mining, bench reference elevation) and the rocktype composition of each mining volume, or contact zone. Cross correlation analysis is used to quantify and define anomalous thresholds and halo size on regularly grided soil sample lines. CRSCOR can also be used to measure dispersion limits in stream sediments, as long as fixed distances are used for sampling. Create an output model, reserve or plot file based on percentile values, simulated points and cutoff grades. This process identifies ore and waste blocks in a conditionally simulated model by minimizing the cost of incorrectly classifying ore as waste or waste as ore. Copy a data definition from one file to another. No records are copied from the input file. Displays a file Data Definition (DD). The DECLUST process declusters a set of sample data. Decodes a named field of the input file through a dictionary file, writing a new output file containing all the fields of the input file, plus the new decoded field, which is given the name supplied in symbolic field *TEXT. This process is designed to set up and edit parameter files which are used as input to the crossvalidation process (XVALID) and the grade estimation process (ESTIMA). Deletes the database file attached to &IN. Converts a file of drillhole data, consisting of collar location data and assay data identified by downhole distances, into a 'desurveyed' file in which each sample is identified by its location and direction in space. In this 'desurveyed' form, each sample may be treated independently without reference to its neighbors. Performs a relational difference operation. No description available. Allows the extension of drillhole seam intersection data to allow for dilution above and below seams. The calculation of discriminant functions (Discriminant analysis) will establish a set of rules using geological control groups or training sets which can then be applied to the classification of unknown samples using the DISCLA process. Multiple discriminant classification of unknown samples into groups using the discriminant functions and group centroids calculated in the DISCAN process. Displays a previously created Datamine plot file on the graphics screen. Edits a file in-place, that is without creating a new copy. Output a Datamine model in a format suitable for input to FOUR-D. No description available. This process allows the modeling and evaluation of cut and fill volumes, based on original and updated wireframe surfaces (DTMs). No description available Output a datamine database plotfile to an external system file in Autocad DXF format. No description available. This process creates a wireframe ellipsoid. Evaluates one or more logical expressions involving substitution variables and constants in a macro or menu. Ends a macro or menu within a macro library. Terminates one or more logical expressions involving substitution variables and constants in a macro or menu. The process takes as input a file containing coded downhole logs, and translates them through a dictionary file into readable English equivalents in a report format. This process will post-process a block model generated from the MODENV process and evaluate the economics of mining satellite ore envelopes taking into account development, access and processing requirements to produce an extraction sequence. The process provides a choice of methods for grade estimation of a block model. ESTIMATE uses the ESTIMA process to estimate grades in a block model. Copies a file, while expanding the number of records so that a record is output for given increments

CRSCOR

GXS

CSMODEL CSOWOPT DDCOPY DDLIST DECLUST DECODE

CS CS CORE CORE CORE CORE

DEFPARM DELETE DESURV

CORE CORE CORE

DIFFRN DIGIT DILUTE DISCAN

CORE CORE CORE GXS

DISCLA DISPLA DMEDIT DMFD DOSCRIPT DTMCUT DTMMOD DXFOUT ECHO ELLIPSE ELSE END ENDIF ENGLOG ENVSEQ

GXS CORE CORE CORE CORE WFM WFM CORE CORE CORE CORE CORE CORE CORE MRO

ESTIMA ESTIMATE EXPFLD

MOD MOD CORE

mk:@MSITStore:C:\Program%20Files\Datamine\Studio3\Help\DatamineStudio.chm:... 05.11.2010

COMMAND TABLE

. 25 31

of a start field until an end field value is reached. EXPMMW CORE This process expands a set of planar perimeters according to a user defined minimum mining width (MMW). This will allow perimeters which describe geological or grade boundaries to be expanded into a mineable entity. The EXPORT process allows data to be exported to a number of data sources by making use of data source drivers. Extends an existing file with data entered in free format. Extends an existing file with data entered in fixed format. EXTRA is a general purpose EXpression TRAnslator that allows you to transform the contents of files by modifying fields and creating new ones based on the values of existing fields. Defines a number of factors from the common inter-correlation between variables using the correlation (R) matrix. Create a Datamine model from a Whittle FOUR-D results file. Output a Datamine model in a format suitable for input to Whittle FOUR-D. Estimate the geostatistical F function. Detects the existence of a database file and sets up substitution variables to the values of fields in the file, for a particular record. Default values of fields may also be found. Copies any file within the database from the input file to the output file, but compressing the file by turning all those fields with a constant value throughout the file into implicit fields. Detects the existence of a database file from within a menu or macro, and, optionally, the number of records in the file. Copies any file within the database from the input file to the output file, expanding the file by turning all implicit fields into explicit fields. This process filters out coincident or adjacent points either within a single file or by using a second filter file. No description available. Generates a tabulated report for output to the screen or to a system file. No description available. No description available. General field transformation. Fields are transformed using user-supplied functions and constants. Stores the current macro position and branches to a specified command label within a macro or menu. Unconditionally branches to a specified command label within a macro or menu.

EXPORT EXTEND EXTNDF EXTRA FACTOR FDIN FDOUT FFUNC FIELD FILCOM FILE FILEXP FILTPO FLAGS FORMAT FXIN FXOUT GENTRA GOSUB GOTO GRADE

DSDIE CORE CORE CORE GXS FDI FDI EGS CORE CORE CORE CORE CORE CORE CORE FDI FDI CORE CORE CORE MOD

The process provides a choice of methods to interpolate a grade into a block model.
No description available. No description available. No description available. Interactive histogram least-square distribution fitting. Generates a frequency histogram and a cumulative frequency histogram for any numeric field. Stops exit from macro or menu on Datamine fatal error. Merges two sets of drillhole data samples with different downhole distances. Evaluates one or more logical expressions involving substitution variables and constants in a macro or menu. Used to convert CAD drawings which have been previously converted to the IGES format, to Datamine plotfiles. Outputs a plotfile to an IGES format file. This IGES file can then be read into any CAD package which supports the IGES format. Recalculates or calculates the IJK field for a model. No description available. The "!INCLUDE" soft command enables records from a DATABASE file to be incorporated as normal data and/or statement lines within a Datamine Macro or Menu. Enters free-format data (i.e. with the data items separated by commas) from the keyboard or from a system character file external to the database.

GXS HEADIN HELP HISFIT HISTOG HOLD HOLMER IF IGESIN IGESOUT IJKGEN IMPORT INCLUDE INDATA

GXS CORE CORE CORE CORE CORE CORE CORE CORE CORE MOD DSDIE CORE CORE

mk:@MSITStore:C:\Program%20Files\Datamine\Studio3\Help\DatamineStudio.chm:... 05.11.2010

COMMAND TABLE

. 26 31

INPCORE INPDDF INPFIL INPFML

CORE CORE CORE CORE

No description available. Inputs a complete file, including its Data Definition, in a standard format (as generated by the OUTPUT process) from a character external system file. Creates a file and enters free format data into it. Free format data is separated by commas. Creates a file and enters data of fixed format into it. The data may come either from the keyboard, or from a system file external to the database; the system file records must be no longer than 80 characters. Creates a text file of standard form, with 80 characters per record. The Data Definition is set up automatically to contain a single alphanumeric field of length 20 words (80 characters) with the fieldname T. Creates a file containing a Data Definition only. Such files may be used in subsequent data input operations. Enters wide (maximum 240 characters) formatted data from keyboard or from a system character file external to the database. No description available. Interpolates blocks using nonparametric methods. Produces a plot file showing an isometric view of drillholes, from a user-defined viewpoint, described by rotation and elevation angles. Generates a plot file of an isometric view of an orebody model. An isometric view is a view of a surface, shown as a mesh of lines, from a user-defined viewpoint, without perspective but with hidden line removal. This process creates an isometric view of perimeters and strings. Generates a plot file of an isometric view of a triangulated (wireframe) model, at any desired orientation. Performs a relational join, subset join, weave or subset weave of two input files into an output file. The type of join required is controlled by the values of the optional parameters @SUBSETR AND @SUBSETF. Take prompted information from the macro or menu file. Take prompted information from the keyboard. The user selects a blast from the input file to work on; this defines both the Bench and Blast numbers which will remain in force until a new blast is chosen. Sets values of substitution variables. Arithmetic and functions are provided. Links a Datamine binary file outside the database to a database. This process is valid only for the native-file structure databases introduced with Version 3.0 of Datamine. LINK3D is an interactive graphic process that allows the user to define, digitize and edit coordinate strings, and then to link these strings together with triangular facets to form one or more wireframes. No description available. Displays any database file in a standard format. Displays any database file with only alphanumeric fields. No description available. Loads a macro file into a standard DATAMINE menu file for faster execution. No description available. No description available. Terminates the storage of interactive input in a character format system file. Starts the storage of all subsequent interactive input in a character format system macro file. Mulivariate analysis of variance for an unbalanced and balanced design. Provides an interactive source code debugger for the development and testing of macros and menus. MDTRAN creates a new block model on a different prototype and coordinate system to an existing block model. The coordinate system for the new model may be translated and rotated with respect to the existing system. Initiates the currently established menu. The menu name is requested. This must be the name of a binary random access menu file loaded by the !LOADCF command. Sorts any file into ascending (or optionally descending) order of the keyfields. Ascending order is the default; descending order is specified by setting optional parameter @ORDER=2. No description available. MINLAY is an interactive graphics process for the generation, viewing and modification of high quality

INPUTC

CORE

INPUTD INPUTW IPDD3K IPDNPG ISOHOL ISOMET

CORE CORE CORE CORE CORE MOD

ISOPER ISOTRI JOIN

CORE WFM CORE

KBOFF KBON LAYOUT LET LINK LINK3D LINKPE LIST LISTC LISTDR LOADCF LP LPT MACEND MACST MANOVA MDEBUG MDTRAN

CORE CORE STP CORE CORE WFM WFM CORE CORE CORE CORE CORE CORE CORE CORE GXS CORE MOD

MENU MGSORT MINEWD MINLAY

CORE CORE CORE CORE

mk:@MSITStore:C:\Program%20Files\Datamine\Studio3\Help\DatamineStudio.chm:... 05.11.2010

COMMAND TABLE

. 27 31

mine design layouts. Data input to the process may be already existing plot files, wireframe model files, point data files, drillhole data files, string/perimeter files and section definition files. MINPER MINZON SCH CORE The MINPER process is used to modify a set of mining design perimeters automatically, according to production scheduling data. This process allows the user to investigate the relationship between mining parameters (bench height, minimum advance distance, minimum mining width) and the composition of each mining volume or zone. This process analyses a block model and flags those blocks that when taken individually or with adjacent blocks satisfy the minimum (cutoff or head) grade or economic value within a volume defined by the minimum mining unit (MMU) dimensions. Evaluates an orebody model through one or more sets of perimeters defining an open pit, using full or partial block evaluation, and writes an output file of results. No description available. This process creates a regular grid of trace lines through a model. These trace lines describe the continuity of a field value or set of field values in the model. Average values of all other model fields are calculated and associated with each trace segment. Creates random numbers. Allows exit from a macro or menu when a fatal error is encountered or if ! is entered by the user. Checks the syntax of the currently established menu. !NOMENU works in the same way as !MENU, except that the menu is not executed. Checks a macro for syntax. The process transforms a set of data to a normal distribution. It is based on the GSLIB code for normal score transformation (nscore). Transfers control to a specified label in the menu or macro if a fatal error occurs. No description available. This process calculates the origin and extent of a rotated model. An optional rotated model prototype file may be created as well as a solid wireframe describing the model limits. Outputs a database file to a system character format file. Estimate grade and variance of 2D or 3D panels. Pauses for a time proportional to the @DELAY parameter. Principal Components Analysis groups fields together into components on the basis of the correlation (R) or variance/covariance (C) matrix. Sends a plot file to the plotter. This process is machine specific, and details will vary from installation to installation. Sends a plot file to the plotter. This process is machine specific, and details will vary from installation to installation. Converts 2-dimensional perimeters to 3-dimensional perimeters by vertical projection into a DTM surface. This process creates a set of model cells and subcells which are bounded in 2 dimensions by a perimeter, and in the third dimension by perpendicular projection distances DPLUS and DMINUS. Attribute values associated with each perimeter may be transferred to the model cells. This process will open or close all perimeters in the input file. Updates the TAGs in a perimeter and a TAG file. Generates perimeters in planes across other perimeters. No description available. Writes file names to an output file (catalogue file) if the file name or field names within the file match the given pattern expressions. Writes field names to an output file if the field names in the input file match the given pattern expressions. Writes records to an output file if the records in the input file match the given input expressions. Display and manipulation of Datamine plot files to produce composite pictures. Creates an in-pit model and allows a quick evaluation of an overall pit design. Enhanced reserve tabulation of a RESULTS file. Generates a scatter plot file, where each data point is annotated with the value of a given field. Generates a scatter plot file, where each data point is annotated with an arrow symbol plotted relative to the X,Y data point.

MODENV

MRO

MODRES MODSBT MODTRA

MOD CORE MOD

MONACO NOHOLD NOMENU NOXRUN NSCORE ONERR OPSYS ORIGIN OUTPUT PANELEST PAUSE PCA PDRIVE PDRIVE PERDTM PERFIL

CORE CORE CORE CORE CS CORE CORE CORE CORE EGS CORE GXS CORE CORE WFM MOD

PEROPN PERTAG PERTRA PFLUSH PICDIR PICFLD PICREC PICTED PITMOD PITRES PLOTAN PLOTAR

CORE CORE CORE CORE CORE CORE CORE CORE WFM CORE CORE CORE

mk:@MSITStore:C:\Program%20Files\Datamine\Studio3\Help\DatamineStudio.chm:... 05.11.2010

COMMAND TABLE

. 28 31

PLOTCN PLOTCX PLOTDA PLOTFR PLOTFT PLOTFX

CORE CORE CORE CORE CORE CORE

Spline contouring in plan or orthogonal sections for point, wireframe or block model data. Spline contouring in plan, orthogonal sections or a rotated section plane with point, wireframe or block model data. Generates a scatter plot file, where each data point is annotated with a symbol centered on the point. Generates a frame plot, consisting of a frame, a grid or tick marks, with annotation on each axis, and user defined titles on each axis. Generates a frame plot, with linear, log and probability options for each axis. The plot consists of a choice of frames, grid or tick marks, with annotation and user-defined titles on each axis. Generates a frame plot consisting of a frame, annotated grid, title block and legend block. Features include scale bar, north arrow and optional plan window for use with PLOTSX (section plotting command). Generates a plotted grid, or set of lines, at any user-defined angle to the plot X and Y axes. Annotation on the lines may be defined and positioned by the user. Generates a bar chart or histogram plot file. Generates a line plot file, showing graphs etc. Generates a line plot file from line segments. A line segment is identified by 4 fields *X1,*Y1 (the line start) and *X2,*Y2 (the line end). Plots the intersection of a block model with any plane. Plot all perimeters in a standard perimeter file. Generates a plot file of perimeters. Process to plot multiple numeric data variables as colored sectors with the radii proportional to the respective variable value. No description available. Scatter plot of data with optional annotation of the selected data fields and plotting of symbols and icons. No description available. Enhanced plotting of drill hole sections and level plans. Used in conjunction with PLOTFX, PLOTSX will produce high quality section plots. Generates a plot file containing a plot title. Generates a plan projection of the linkages in a wireframe model. Generates a plot from a text file within the database. This enables legends, text etc. to be added to any plot file. Generates a multi-value scatter plot file, where each data point is annotated by up to 10 fields centered on this point. Section plot in any direction through a wireframe model. Generates a tabulated report on the plotter. No description available. No description available. Polynomial regression. The polynomial fitted is up to the 5th order, and thus includes a regression line. This process calculates and displays PP (probability-probability) and QQ (quantile-quantile) plots. These are graphical techniques for determining if two data sets come from populations with a common distribution. Interactive production scheduling process. The PROMOD process "optimizes" a block model so that the minimum number of subcells is used, without losing accuracy. Displays lines on screen and prompts for input. This process copies a set of perimeters with options. Generates a model prototype, consisting of a Data Definition with standard field names and usersupplied default values. To create a prototype plot file with defined plot and data area shape/size, and optionally data ranges and scaling factors. Q - mode non linear mapping groups together samples using the euclidian distance to calculate a dissimilarity matrix. Note the difference with R mode non linear mapping analysis which clusters elements or parameters. The process carries out quantile analysis on a set of sample data.

PLOTGR PLOTHI PLOTLI PLOTLN PLOTMX PLOTPA PLOTPE PLOTPI PLOTSA PLOTSI PLOTSK PLOTSX PLOTTI PLOTTR PLOTTX PLOTVA PLOTWS PLTABL PLTLAY POLD3D POLREG PPQQPLOT

CORE CORE CORE CORE MOD CORE CORE CORE CORE CORE CORE CORE CORE WFM CORE CORE WFM CORE CORE CORE CORE CORE

PRODSH PROMOD PROMPT PROPER PROTOM PROTOP QNLM

SCH MOD CORE CORE MOD CORE GXS

QUANTILE

CORE

mk:@MSITStore:C:\Program%20Files\Datamine\Studio3\Help\DatamineStudio.chm:... 05.11.2010

COMMAND TABLE

. 29 31

QUIG RANK RECCOP REGMOD

CORE CORE CORE MOD

Quick generation of a number of different types of plot with full auto-scaling. Scatter plots, histograms, line and perimeter plots may be produced, displayed and optionally output to a plot file. Ranks values of a given numeric or alphanumeric field in a file. Copy a group of records from one file to another. Produces a regular cell model from any type of Datamine orebody model. The parameters of the output regular cell model are taken from a prototype model on &IN1. The model to be converted is entered on &IN2. The regular model is output on &OUT. Produces a regular cell model for pit optimization. Allows comments to be put anywhere in a macro or menu file. Renames a database file. General tabulating report generator with provision for separate keyfield sections. Generates a tabulation to the user's own format requirements, providing up to 5 lines heading per page, at up to 120 columns print width. Reserve Category Modeling. Performs a relational restriction operation. Transfers control back to the next statement following a GOSUB statement in a macro or menu. No description available. R - mode non linear mapping groups together elements using the angular distances calculated from the Pearsson correlation coefficient matrix. Note the difference with Q mode non linear mapping which clusters samples on the basis of composition. Formatted screen command for menu and macro interaction. Clear the screen and erase the history of SCREEN commands that have been executed in the current Datamine session. Format text using format controls defined in the SCREEN command. Diverts text screen output into a system file during macro execution. In a macro or menu, restores screen output previously diverted by a !SCROFF command. Creates a section definition file. Selectively copies named fields from the input file to the output file. Selectively deletes named fields from the input file during a copy to the output file. Selective copy of records for which X and Y co-ordinate values lie within a perimeter defined in a perimeter file. The process selects records which lie on or within a perimeter and copies them to an output file. No description available. Copies records of a file which has X, Y and Z co-ordinates lying above/ below triangulated surfaces or inside/outside a wireframe model. Select records lying inside/outside wireframe models or above/below triangulated (DTM) surfaces. Updates the environment with new variables. Inserts a user-defined value into a given field either during copying of a file or as an in-place operation. The SGSIM process creates a regular grid of conditionally simulated points using sequential gaussian simulation. This process splits model blocks at cell boundaries and recalculates the IJK value. Intersects a set of parallel perimeters by a set of orthogonal planes. Histogram using the 'Shortcut' evaluation method. 'Shortcut' method for grade and tonnes above cut-off. Sorts any file into ascending (or optionally descending) order of the keyfields. Performs a simple sideways merge between two input files. SPLICO produces contour plot and string files of irregularly scattered data points or of a triangulated wireframe or of a solid model. Takes a single input file and copies the data within it to multiple output files. Calculates general summary statistics for a single field, in log or non-log mode with or without class selection by Sturgess' Rule.

REGMOW REM RENAME REPORK REPORT RESCAT RESTRI RETURN RINGS RNLM

CORE CORE CORE CORE CORE CORE CORE CORE RNG GXS

SCREEN SCREND SCRFMT SCROFF SCRON SECDEF SELCOP SELDEL SELEXY SELPER SELTR2 SELTRI SELWF SETENV SETVAL SGSIM SLIMOD SLIPER SMUHIS SMUMOD SORTX SPLAT SPLICO SPLIT ST1GX

CORE CORE CORE CORE CORE CORE CORE CORE CORE CORE CORE WFM WFM CORE CORE CS MOD CORE EGS EGS CORE CORE CORE CORE CORE

mk:@MSITStore:C:\Program%20Files\Datamine\Studio3\Help\DatamineStudio.chm:... 05.11.2010

COMMAND TABLE

. 30 31

START STATNP STATS STKPAR STKSAV STPMOD

CORE CORE CORE CORE CORE FSO

Starts a macro or menu. No description available. Calculates general summary statistics on numeric fields in a file. Retrieves substitution variables and their values from a system character format file. Writes substitution variables and their values from a system character format file. Process a block model and flag those blocks that when taken individually or with adjacent blocks will satisfy the minimum (cutoff or head) grade or economic value within a volume defined by the minimum stope dimensions. Performs a relational subset join of two input files into an output file. No description available. Performs a relational subset weave of two input files into an output file. Reads in a SURPAC .DTM system file (SURPAC v1) and creates two related Datamine files. Write a DATAMINE perimeter file to a SURPAC2 string file. Converts a Datamine perimeter file to a SURPAC string file. Converts a Datamine point file to a SURPAC (v1) observation file. This process computes provisional and/or adjusted coordinates of all observed survey stations contained in an input file of reduced observations such as output from process SUROBS. Interpolates a set of point data into a pair of surfaces expressed as sub-cells in a 3-D model with any number of cells in the Z direction. SURLOG is a data input process which will read a character format system file containing records of survey information and measurements as recorded on a digital data recorder by electronic survey equipment. SUROBS is a reduction process for angle and distance survey measurements. Interpolation of upper and/or lower elevation values onto a file of two-dimensionally defined points. SURTAC is a survey measurement reduction process. Generates a triangulated digital terrain model from perimeter, string and/or point data subject to optional boundary and string edge constraints. SURVIG is an interactive graphic process, that allows the surveyor to view, edit, merge and interrogate a database of surveyed point and string data representing surface and underground mining excavations. SURVIN is a data format conversion process. SURVOU is a data format conversion process. Load a perimeter file from a SURPAC2 string file. Loads a SURPAC string file (assumed to be closed perimeters, but only the case if the last and first SURPAC points are duplicated) into a Datamine perimeter file. Checks if a system file exists. Displays Datamine system parameters. Produces reserve tabulations from a results file produced by other processes such as MODRES. Table driven "flat-file" data input process. Processes TDOUT and TDIN provide the interface between Datamine and the standalone Whittle THREE-D program for pit optimisation. Processes TDOUT and TDIN provide the interface between Datamine and the standalone Whittle THREE-D program for pit optimisation. Generates a ternary (triangular) diagram on a printer, with optional output of a table of the data values. Tests Command Processor command decoding and entry to process programs, and branch back to the Command Processor. This process calculates the volume, tonnage and grade for up to 10 specified grade fields. The results may be classified by up to three levels of keyfield. Fits a polynomial trend surface to a set of data, and optionally generates a scale contour plot of the surface, which is sent to the printer. Generates contours directly from irregularly scattered data points or from a triangulated digital terrain model as produced by TRIANR. Generates a Datamine cell/sub-cell model from a triangulated (wireframe) definition, either a solid model or a digital terrain model, with accurate preservation of enclosed volume.

SUBJOI SUBSET SUBWVE SUDTTR SUPES2 SUPEST SUPOOB SURCAL SURFIP SURLOG

CORE CORE CORE CORE CORE CORE CORE SRV MOD SRV

SUROBS SURPOI SURTAC SURTRI SURVIG

SRV MOD SRV WFM SRV

SURVIN SURVOU SUSTP2 SUSTPE SYSFILE SYSPAR TABRES TBLIN TDIN TDOUT TERPLT TEST TONGRAD TREND TRICON TRIFIL

SRV SRV CORE CORE CORE CORE CORE CORE TDI TDI CORE CORE CORE CORE WFM WFM

mk:@MSITStore:C:\Program%20Files\Datamine\Studio3\Help\DatamineStudio.chm:... 05.11.2010

COMMAND TABLE

. 31 31

TRIVAL

WFM

Evaluates a standard Datamine cell - sub-cell model against a triangulated wireframe model, reporting on the contents of closed wireframes or the reserves below or above a single-surface (digital terrain model) wireframe. Reports volume and other statistics of a wireframe model. For tabular ore bodies, based on a set of desurveyed drillhole sample data, composites are commonly created across the defined ore boundaries. Transforms a set of X,Y,Z data into an Unfolded Coordinate System [UCS] as defined by a stratified geological unit. Unlinks a Datamine binary file from a database. This process is valid only for the native-file structure databases introduced with Version 3.0 of Datamine. No description available. The process allows you to display experimental variograms, as produced by the VGRAM process, and fit a model to them using interactive graphics. Initializes the number of substitution variables to zero for the current macro level. Reads substitution variables from a file. Saves or merges substitution variables into a file. VARSAVE will, (by default) save all substitution variables, but will allow a named set of variables only to be saved or merged into the file. The VCONTOUR process creates a variogram contour plot and displays it in the Design Window. This can be used to determine the major and minor axes of anisotropy in any plane. No description available. This process calculates variograms and/or cross variograms for a range of azimuth and dip directions. No description available. No description available. No description available. No description available. No description available. The process is designed to assist in the selection of parameters for grade estimation, using the crossvalidation method.

TRIVOL TRUETHK UNFOLD UNLINK UTQENV VARFIT VARINIT VARLOAD VARSAVE VCONTOUR VER VGRAM WEAVE WEDGEVOL WFTREND WIREPE XRUN XVALID

WFM CORE UNF CORE CORE EGS CORE CORE CORE CORE CORE CORE CORE WFM WFM WFM CORE MOD

Copyright 1983-2006 Datamine Corporate Limited

mk:@MSITStore:C:\Program%20Files\Datamine\Studio3\Help\DatamineStudio.chm:... 05.11.2010

Anda mungkin juga menyukai