THRU-HULL FITTINGS
Straight Fittings - Inches 90 Degree Fittings - Inches
Look of stainless - price of plastic Strong plating process strengthens parts & resists chemicals Five step metal bonding process Wont flake, chip or easily scratch For above waterline use
ORDER NO. 205-00750 205-01200 205-01500 205-07590 205-01290 205-01590
E 1 1-3/8 2 1 1-3/8 2
E 1 1 1-3/8 2
Two lengths are available. The Standard model has full length thread for thick hulls for easy tightening. The Short thread is a more compact size. Allows installation near corners and in confined areas. Stainless steel thru-hull connectors are designed for installation above the waterline only
ORDER NO. 106-66540 106-66541 106-66543 106-66545 106-66546 106-66547 106-66549 106-66551
Mfr. No. 66540-3 66541-3 66543-3 66545-3 66546-3 66547-3 66549-3 66551-3
Description / Hose ID Connectors Short - 5/8" Connectors Short - 3/4" Connectors Short - 1-1/8" Connectors Short - 1-1/2" Connectors - 5/8" Connectors - 3/4" Connectors - 1-1/8" Connectors - 1-1/2"
672
THRU-HULL CONNECTOR
- with Strainer
Accommodates 3/4" I.D. hose. Thru-hull connector with strainer prevents debris from entering and clogging the aerator pump. Strainer attaches to threads that extend beyond external retaining nut. Tough acetal construction. Maximum hull thickness: 1-7/16" Installation hole size: 1-1/16" to 1-1/8" diameter Caution: Do not use strainer as a thru-hull connector nut replacement, because doing so may cause hazardous leaking.
ORDER NO. 103-38860
90 HOSE-TO-THREAD CONNECTOR
for 3/4'' I.D. hose
Barbed end accommodates 3/4" I.D. hose. Threaded female end fits TSUNAMI Series threaded outlet. Acetal construction. ORDER NO. 103-38900 Mfr. No. 3890-3
HOSE CONNECTOR
Barbed end accommodates 3/4" I.D. hose. Threaded end fits TSUNAMI Series Threaded outlet Acetal construction. ORDER NO. 103-38990 Mfr. No. 3899-3
Thru-hull connector with 4" stem length for thicker transoms or hulls. Made with durable thermoplastic construction which prevents electrolysis. Max. Transom thickness: 2" Installation hole size: 1-1/16" to 1-1/8" dia. Flange diameter: 2" ORDER NO. 103-38960 Mfr. No. 3896-3
90 THRU-HULL CONNECTORS
Colour: White For use where clearance is limited. Prevents kinking of hose. Installation hole diameter: 7/8" ORDER NO. Hose I.D. Fits Hull Thickness 102-52400 3/4" Up to 15/16"
High strength polypropylene construction Serrated snap fit installation Installation hole diameter: 1" . Fits transom thickness up to 2-1/4".
Colour: White
Watertight seal for cables, tubing or wires Self-attaching - no hardware needed Turn down washer included Fits 3/4 hole - slot is 1/4" dia.
ORDER NO. 205-99010 205-99011
Replaces worn out flapper scuppers. 70% more drainage than competitive models. New twist-off feature for clearing debris. Retrofits all hole patterns. Stainless steel lock screw for safety. Seal slotted to fit over 1-1/4" motorwell tube. Large 1-1/8" drain Meets all ABYC specs.
For more information see: www.thmarine.com
ORDER NO. 205-11010 205-11012
673
LIVEWELL PUMPS
RULE LIVEWELL/BAITWELL PUMPS
12 Volt DC Discharge nozzle can be rotated 360 for optimal installation Pump housing can rotate 360 to allow positioning of the discharge outlet Quick one hand "push button" motor cartridge removal system Dual port fitting for optional washdown pump ISO 8846 (Ignition Protection)
ORDER NO. 777-04010 777-04011 777-04012 777-04030 777-04031 777-04032 777-04050 777-04051 777-04052
Mfr. No. 401C 401FC 401STC 403C 403FC 403STC 405C 405FC 405STC
Description 500 GPH, Angled 4" Thru-Hull Fitting 500 GPH, Seacock Fitting 500 GPH, Straight 4-3/4" Thru-Hull Fitting 800 GPH, Angled 4" Thru-Hull Fitting 800 GPH, Seacock Fitting 800 GPH, Straight 4-3/4" Thru-Hull Fitting 1100 GPH, Angled 4" Thru-Hull Fitting 1100 GPH, Seacock Fitting 1100 GPH, Straight 4-3/4" Thru-Hull Fitting
Outlet 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 1-1/8" 1-1/8" 1-1/8"
Amp Draw Fuse Size 2.1 amp 2.1 amp 2.1 amp 2.8 amp 2.8 amp 2.8 amp 3.3 amp 3.3 amp 3.3 amp 2.5 amp 2.5 amp 2.5 amp 5.0 amp 5.0 amp 5.0 amp 6.0 amp 6.0 amp 6.0 amp
Model No.403STC Straight Thru-Hull Fitting
Model No.401FC Seacock FittingTapered Thread
1" NPT Female intake 1/2" NPT Female optional dual port connection 1-1/8" Discharge 12 Volts - Amp Draw @ 13.6V 7.0 - Amp Draw @ 12.0V - 4.8
ORDER NO. 777-20902
PERFORMANCE DATA
13.6 Volts 12.0 Volts GPH @ 0' 1600 GPH / 6056 LPH 1300 GPH / 4920 LPH GPH @ 3.0' 1400 GPH / 5299 LPH 1100 GPH / 4163 LPH GPH @ 6.0' 1200 GPH / 4542 LPH 900 GPH / 3406 LPH
Designed to install directly into any valve or fitting with 1" NPT threads Pump must be installed below the water line
674
For more information see: www.xylemflowcontrol.com
LIVEWELL/AERATOR/MISC. PUMPS
TRANSOM MOUNT LIVEWELL PUMPS
Rule introduces a lineup of Transom Mounted Aerator Pumps. This allows the fisherman to have professional aeration of his livewell without the need to install a pump through the hull. The unique "quick-release" pump with strainer base assembly snaps easily into the transom bracket provided. At the end of the day, the pump can be removed for storage. Pumps feature 6' wire leads. ORDER NO. 272-00241 272-02500 Mfr. No. 24TB 25DTB Description 360GPH 500GPH
Model 73
Model 75
Pump with quick disconnect fitting and fuse Battery terminal power adapter Vehicle power adapter 8' lay flat hose ORDER NO. 777-02800 Spray nozzle Mfr. No. RP280KR Case with integrated battery Battery Charger
Features: Pumps fresh water, sea water, diesel and anti-freeze Diesel refueling and transfer Pumps up to 100 gallons (379 L) per charge Maximum Pump Volume: 280 GPH Charging Time: 10 to 12 Hours All components are enclosed in a convenient carrying case
12 Volts, 25 amps, maximum 2.6psi, 20 CFM 10' (3m) cable length with battery clips Pre-lubricated and sealed bearings to ensure long life Robust fan drive belt for long life Adjustable nozzles for most inflatables and valve types included Grip pad for one handed operation
675
AERATOR PUMPS
TSUNAMI AERATOR PUMPS
Tsunami aerator pumps are durable, designed to last and deliver high output from a small package. Efficient design circulates water around the pump motor housing, helping to absorb the heat given off by the operating motor. Moves more water and oxygen into livewell tanks to keep fish active Cooler-running motors, premium materials, watertight seals and waterproof wiring Cartridges are replaceable and interchangeable No mounting brackets necessary NMMA and CE certified Three year warranty
Fuse Size 3A 4A 5A
Hose Dia. Repl. Cartridge 3/4" ID 3/4" ID 1-1/8" 104-46200 104-46220 104-46240
Dimensions
Model No A T500 3-1/2" 1-1/2" T800 3-1/2" 1-1/2" T1200 3-1/2" 1-1/2" B 3" or 1" 3" or 1" 3" or 1" C 3-1/4" 3-7/8" 4" D 2-7/8" 3-1/4" 3-1/4" E 3-5/8" 4" 4-7/8" F 3/4" - 14 NPSM 3/4" - 14 NPSM 1-3/8" - 12 UNF G 3/4" - 14 NPSM 3/4" - 14 NPSM 1-3/8" - 12 UNF
A F
D C
Model # 4670-7
Model # 4672-7
A 3-1/4" 1-1/4"
B 3"
4-1/8" 4-1/4"
676
677
100% factory tested Fully submersible Meets and exceeds NMMA, ABYC, ISO 8846, Ignition protected CE and USCG specificatons 12 Volt 3-year warranty Dura-port discharge ports Anti-airlock protection Seawater tough Removable motor cartridge feature allows for easy cleaning and maintenance
ORDER NO. 847-28503 847-28703 847-38503 847-38703 Model No. Description GPH
3800 Series
Amp Draw
Fuse Size
Hose Size
Repl. Cartridge
Aerator Straight Inlet Aerator Straight Inlet Aerator 90 Inlet Aerator 90 Inlet
Basspirator II System
Installation kit for new aerating system offering the advantage of continuous replenishment of fresh water to the live well.
Kit includes: Reliable 500 GPH cartridge recirculating pump with 90 outlet 16 gauge wire ( brown & black ) Illuminated & fused dash switch panel switch Aerating head double valve 3/4 I.D. thru-hull 3 feet of 3/4 I.D. bilge hose Complete illustrated instructions
ORDER NO. 847-34024
Kit includes: 500 GPH Basspirator II cartridge aerating pump Two 1-1/2 overflow fittings and hose 7 feet of 3/4 I.D. bilge hose 16 gauge wire ( brown & black ) Attractive dash switch with indicator light and built-in fuse holder Aerating head single valve 4 hose clamps Transom shim ( # 847-71245 ) for boats with angled transom Complete illustrated instructions
ORDER NO. 847-34014
400 GPH pump Flexible hose Aerating head with mounting clip Stainless steel shaft and hardware 2.0 amp draw use 3 amp fuse Ignition protected Stainless steel shaft and hardware 12 Volt
Anti-Airlock protection Saltwater tough 100% factory tested Meets and exceeds NMMA, ABYC, ISO 8846, CE and USCG specifications Three year warranty
ORDER NO. 847-24052
NO. 90511
NO. 90331
NO. 90191
NO. 90261
INTAKE STRAINER
Attaches directly to intake tube on Johnson Aerator Pumps. Filters debris which could clog pump.
678
Features: Heavy-Duty Bilge Pump Available in 2 flow capacities: 1700 GPH and 2000 GPH Fully-adjustable outlet and base configuration High-efficiency permanent magnet motor Molded two-wire seal eliminates a potential leak path Benefits: Quick and easy installation Tough, dependable performance in a small package Designed to out-perform Tested relentlessly to deliver reliable, efficient performance
104-47600
Mfr. No.
Description
4730-1 1700-GPH 12V Delivers a true 1700 GPH at open flow while drawing less than 6-amps 104-47600 4760-1 2000-GPH 12V Delivers over 2000 GPH at open flow while drawing less than 7-amps
Fully Sealed Electronics - No moving parts 12V - Digital Solid State Electronic Sensing Technology to detect bilge water levels & trigger pump activation Wont be exposed to continuous cycling Can be mounted on the floor of the bilge directly to a stringer alongside the basket of the pump Directly compatible with competitive products
679
BILGE PUMPS
AUTOMATIC BILGE PUMPS
Computerized operation on the principle of impeller resistance. Float switches are not required. The pump will turn on every 2-1/2 minutes for about one second to sense for water. If water is present, the pump will sense resistance and continue to run until all water is removed. Thereafter, it will check for water every 2-1/2 minutes. Power use in the checking mode is minimal. ORDER NO. Mfr. No. GPH Volts 272-00251 25S 500 12 DC 272-00271 27S 1100 12 DC *Converts 1-1/8" pump outlet to 3/4" ID hose Amps@12v 1.9 3.3 Height 4" 4-1/2" Width 2-3/8" 2-3/8" Hose Dia. ID 3/4" 1-1/8" Panel Switch Hose Adapter 272-00049 272-00049 272-00069*
500 G.P.H. Pump
Mfr. No.
RM500A RM500A-24 RM750A RM750A-24 RM1100A RM1100A-24
Description 500 GPH, (1893 lph) 500 GPH, (1893 lph) 750 GPH, (2839 lph) 750 GPH, (2839 lph) 1100 GPH, (4162 lph) 1100 GPH, (4162 lph)
Volts 12 V 24 V 12 V 24 V 12 V 24 V
Dimensions 4.5" H x 6" W 4.5" H x 6" W 4.5" H x 6" W 4.5" H x 6" W 4.5" H x 6" W 4.5" H x 6" W
Note: # 272-05000A replaces # 272-05000 / # 272-07500A replaces # 272-07500 / # 272-11000A replaces # 272-11000.
Saves installation time and space in the bilge Environmentally safe, non-contact, mercury-free float switch
Description 1500 GPH, (5676 lph) 2000 GPH, (7568 lph) 2000 GPH, (7568 lph) Volts 12 V 12 V 24 V Hose Size 1-1/8" 1-1/8" 1-1/8" Dimensions 6" H x 7-1/4" W 6" H x 7-1/4" W 6" H x 7-1/4" W Amps 4.8 8.4 4
500
Traditional non-automatic bilge pumps are operated by the G.P.H. Pump use of a control switch to sense water and activate the pump. Submersible Ignition protected High efficiency, low amp motor No burn-out when dry Stainless Steel shaft
ORDER NO. Mfr. No. Capacity GPH 272-00024 24 Round 360 272-00025 25D Round 500 272-00020F 20F Square 800 272-00020R 20R Round 800 272-00027 27D Round 1100 *Converts 1-1/8" pump outlet to 3/4" ID hose Volts 12 DC 12 DC 12 DC 12 DC 12 DC Amps@ 12V 2.1 1.9 2.8 2.8 3.3 Height 3-1/2" 3-1/2" 4" 3-3/4" 4-1/4"
HoseAdapter -
272-00069*
680
Model 24-35A includes 360 GPH pump (272-00024) with Mercury-Free Rule-A-Matic Switch (272-00035-1) Model 25-40A includes 500 GPH pump (272-00025) with Mercury-Free Rule-A-Matic Plus Switch (272-00040-1) Model 20-35A includes 800 GPH pump (272-00020R) with Mercury-Free Rule-A-Matic Switch (272-00035-1)
ORDER NO. 272-24350-1 272-25400-1 272-20350
Description 360 GPH Pump with Rule-A-Matic Switch 500 GPH Pump with Rule-A-Matic Plus Switch 800 GPH Pump with Rule-A-Matic Switch
Mfr. No. 99
Mfr. No. 66
Bracket Mount for 360, 500, 1100 G.P.H. Pump
Float Switch See Note 3 See Note 3 See Note 3 See Note 3 See Note 3 See Note 3 See Note 3
Note 1 Panel Switch options are 272-00041, 272-00045 or 272-00049 Note 2 Panel Switch options are 272-00045 or 272-00049
Note 3 Float Switch options are 272-00035-1 or 272-00037-1 * Converts 1-1/8 pump outlet to 3/4" ID hose ** Heavy duty construction for both commercial and pleasure boat use.
681
GPH 400
Volts 12
44960-0002
ORDER NO.. # POSITION 44960-0002 2 (on, off, lighted) 44960-0003 2 (on, off, unlighted)
682
Mercury free
Mercury free
272-00037-1
Mercury free
Mercury free
Switch Specifications
ORDER NO. Mfr. No. 35A 272-00037-1 37A 272-00040-1 40A
272-00035-1
Max Amps(12V) 14 20 20
Size (Inches)(L x W x H) 4-1/2" x 1-1/2" x 2" 5" x 2" x 2" 4-7/8" x 2-1/2" x 2-3/4"
SWITCH ADAPTER
Adapter to attach Rule SuperSwitch to Rule 3700 & 4000 GPH pumps.
#64
SWITCH ADAPTER
Adapter to attach Rule SuperSwitch or Rule-A-Matic Switch to Rule 1500 GPH, 2000 GPH and 5-year pumps.
#65
Mfr. No. 65
683
Mfr. No. 41 45 49
Description 3-Way Panel Light Switch 3-Way Panel Switch 2-Way Panel Switch
90 ELBOW ADAPTERS
90elbow adapters are designed for rigid pipe installations of Sump and Utility Pumps. Adapters snap onto discharge port. Opposite end is female pipe threaded. High impact plastic will not rust, corrode or discolor.
ADAPTERS
Designed to be used with Rule Pumps and thru-hulls. Heavy-duty molded, non-corrosive, high impact plastic. ORDER NO. Mfr. No. Description 272-00063 63 Bulkhead adapter - adapts 1-1/2" hose to 272-00067 272-00068 272-00069*
67 68 69
standard garden hose fitting. Hose adapter - adapts 1-1/2" outlet to 1-1/8'' hose Garden hose adapter - adapts 1-1/8" outlet to standard garden hose fitting. Double stepped straight adapter for adapting 1-1/8'' outlet to 3/4'' or 5/8'' I.D. hose.
Mfr. No. 70
Mfr. No. 71
684
FLOAT SWITCHES/PUMP
AUTOMATIC FLOAT SWITCHES
The Automatic Float Switch converts any bilge pump that draws 12 amps (at 12 VDC) or less to fully automatic operation. It features a compact, low-profile design that mounts on any surface from horizontal up to a 24 angle. No large voltage drop which reduces bilge pump output. Incorporates a reliable and affordable mechanical switch that actuates pump motor at 2" water level. Wire leads do not flex or hinge with the float. Integral cover dampens bilge sloshing to reduce pump cycling, and prevents debris interference. Sealed switch mechanism resists moisture, fume ignition and electrical shock. Contains no mercury, a "Persistent Toxic Substance" listed as a health hazard. CE rated. Float switch installs independently or directly onto the rear slots of the V-Series pump bracket. Features a convenient test knob to test pump operation.
Description Float switch with cover 12 and 24 Volt Float switch 12 and 24 Volt Float switch cover only
104-42010 104-42020
Height. 5-1/4"
Width
17A
3800
12 DC
20.0
8-1/2"
1-1/2"
272-00049
N/A
685
671-47261
600 - 1000 GPH Models Dimensions: 4.10" H, 3.20" W, 6" L 1250 GPH Model Dimensions: 4.60" H, 3.20" W, 6" L
Capacity 3ft (0.9m) Head (13.6 V) 32 L/min - 500 GPH 38 L/min - 600 GPH 44 L/min - 700 GPH 51 L/min - 800 GPH Capacity Straight (13.6 V) 38 L/min - 600 GPH 51 L/min - 800 GPH 64 L/min - 1000 GPH 79 L/min - 1250 GPH
Fuse Size Hose Size 5A 5A 5A 5A 3/4 3/4 3/4 1-1/8 & 1-1/4
All versions include a removable check valve Replaceable cartridge design Pre-wired for auto operation as well as
manual override
Non clogging pump and switch Water-cooled motor Free and easy flow Salt water tough Easy to clean
Capacity 3ft (0.9m) Head (13.6 V) 33 L/min - 525 GPH 44 L/min - 700 GPH 50 L/min - 800 GPH 60 L/min - 952 GPH Capacity Straight (13.6 V) 40 L/min - 630 GPH 50 L/min - 800 GPH 63 L/min - 1000 GPH 73 L/min - 1150 GPH Amp Draw 2.5 A 3A 3.2 A 3A Fuse Size 5A 5A 5A 5A Hose Barb Size I.D. 3/4 3/4 3/4 1-1/8
Description 500 GPH Ultima Combo 3/4 Dura Ports 750 GPH Ultima Combo 3/4 Dura Ports 1000 GPH Ultima Combo 3/4 Dura Ports 1250 GPH Ultima Combo 1-1/8 Discharge
ULTIMA SWITCH
Mercury Free design with no moving parts Automatic bilge pump switch 12/24V DC 20 amp draw. Detects fluid using the patented Mirus "field effect" technology. Features: 3-year warranty Turns pump on at 2" fluid level Turns pump off at 3/4" fluid level Not effected by oil, fuel or debris Reverse wire protection 12/24V DC operation Handles all pumps up to 20 amp draw Meets ISO 8846, ABYC, NMMA and USCG
ORDER NO. 671-36303
BILGE ALERT
High Water Alarm. A new level of high water protection. 100db alarm and LED warning light alert you to bilge water levels above normal conditions. Detects fluid using the patented Mirus "field effect" technology. Features: 100db alarm and LED warning light Completely sealed and corrosion proof Three way panel switch Test/Armed/Off No moving parts Easy to install 12VDC Meets ISO 8846, NMMA, USCG & ABYC requirements Ignition protected 3-year warranty
ORDER NO. 671-72303
686
General Pump Features Fully submersible Ignition protected 12 Volt Compression lip seals Dura-Port discharge port 3/4" discharge only 100% factory tested
Anti-Airlock protection Meets and exceeds NMMA, ABYC, ISO 8849, CE and USCG specifications Three year warranty Dimensions: 2-3/4"L x 2-3/4"W x 4-1/2"H 316 stainless motor shaft and hardware
LIFT TAB
TWIST
PULL OUT
Capacity 3ft. (0.9m) Capacity Straight Head (13.6V) (13.6V) 33 L/min - 525 GPH 40 L/min - 630 GPH 44 L/min - 700 GPH 50 L/min - 800 GPH 63 L/min - 1000 GPH 73 L/min - 1150 GPH
Fuse Size 5A 5A 5A 5A
32903 1000 GPH 50 L/min - 800 GPH 42123 1250 GPH 60 L/min - 952 GPH * Does not include Dura-Port connection
Mfr. No. Description 22502 22702 22102 500 GPH Proline Bilge 750 GPH Proline Bilge 1000 GPH Proline Bilge
Capacity 3ft. (0.9m) Capacity Straight Head (13.6V) (13.6V) 33 L/min - 525 GPH 40 L/min - 630 GPH 44 L/min - 700 GPH 50 L/min - 800 GPH 60 L/min - 952 GPH 73 L/min - 1150 GPH
Amps 2.5 A 3A 3A
Fuse Size 5A 5A 5A
Features:
Bilge Pump Model 847-32503, 671-75030 847-32703, 671-77030 847-32903, 671-79030 847-42123, 671-82030
Fully submersible Ignition protected 12 volt Saltwater tough 100% factory tested Meets and exceeds NMMA, ABYC,
ISO 8846, CE and USCG specifications
3 year warranty
687
BILGE PUMPS
5.75" 3.2" 2.82" 16 GA Description 750 GPH Low Boy, 12 Volt Capacity 3 ft.(0.9m) Head (13.6V) 44 I/min - 700 GPH Capacity Straight (13.6V) 50 I/min - 800 GPH Amps 3A Fuse Size 5A Connection 3/4"
Amperage 7A 7.5 A 15 A
Hose Size 1-1/8" & 1-1/4" 1-1/8" & 1-1/4" 1-1/2" & 2"
120L/ min - 1900 GPH 130L/ min - 2060 GPH 164L/ min - 2600 GPH 252L/ min - 4000 GPH
40004
688
One 2-way On/Off switch with bezel plate One ID x 5 corrugated hose One thru-hull fitting for ID hose Two Snap-It hose clamps One two-conductor 16 gauge wire, 20 long One in-line fuse holder with 2-amp fuse
BILGE PUMP SWITCH
Panel-mounted rocker switches for use with pump that draws 10-amps or less. spade terminals. 6 Volt through 32 Volt DC only, 10-amps maximum. Plate is 2-13/16 X 1-7/8, Hole size is 1-1/2 x 7/8.
Caution: Bilge pump switches are not external ignition protected.
Caution: Bilge pump switches are not external ignition protected. ORDER NO. 104-41160
ORDER NO. Mfr. No. Description 107-76150 7615-3 2-way On/Off Switch
ORDER NO. Mfr. No. Description 109-91850 9185J1 For 7/8" to 1 OD hose 109-91851 9185M1 For 1-3/16 to 1-7/16" OD hose
ORDER NO. Mfr. No. Applications 104-42320 4232-7 Fits " aerator inlet & 103-38860 thru-hull 103-38850 3885-3 Same as above - plastic
689
36680-2000
Corrosive resistant base assembly. Inlet and outlet ports for 3/4" ID hose except 34600 which has 1" ports. For Service Parts, See Page 692
46200-0000 Supplied with 36680 and 36600 series pumps. Std. Carton 4 units.
FLOW Dimensions - in (mm) GPM (LPM) HEIGHT WIDTH LENGTH 5.5 (20,8) 8-1/2 (216) 6-1/2" (165) 7-5/8 (194) 8.0 (30,3) 8-1/4 (210) 5-7/8 (150) 5-7/8 (150) 10.8 (40,9) 10-1/2 (267) 8-5/8 (220) 9-3/16 (234)
36600-0000
34600-0000
PAR-MAX 4
MODEL NO. 31705
New generation, continuous rated bilge pump with waterproof coating for harsh environments. 258 gph (978 lph) open flow output Self-priming up to 10ft (3m) allows mounting above wet bilges. Diaphragm design allows extended dry running. Build-in thermal overload protection. Complete with Pumpgard strainer. Complies with USCG 183.410 and ISO 8846 MARINE (Ignition protection). ISO 8849 MARINE (Bilge Pump Standard). Fitting: Connections for 3/4" (19mm) ID hose. Size: 7-1/4" long x 4-1/8 " wide x 4-1/10" high (18cm x 10.5cm x 10cm).
ORDER NO. 31705-0092 31705-0094 18912-3050
Description 12 Volt DC, fuse 10 amp. 24 Volt DC, fuse 7 amp. Diaphragm kit
Included
AMPS/ FLOW Dimensions-in (mm) FUSE SIZE GPM (LPM) HEIGHT WIDTH LENGTH 6/6-1/4 4 (15,1) 7-1/4 (185) 4-1/16 (103) 7-5/8 (190)
36960-2000
All DC voltage pumps shown above meet applicable ignition protection sections of the U.S. Coast Guard Electrical Regulations (Title 33, Chapter 1, Part 183, Subpart 1).
690
BILGE ACCESSORIES
Strainer protects all electric diaphragm bilge pumps. Prevents unnecessary pump breakdowns caused by
particles in the water.
Transparent housing allows instant inspection. 46200-0000 model installs in-line between bilge pick up and pump. Quick in-place cleaning of the 20 mesh stainless steel screen.
Fitting: Connections for 3/4" (19mm) ID hose. Size: 4-3/4" long x 2-3/4" wide x 2-1/2" high (12cm x 7cm x 6cm). ORDER NO. 46200-0000 Model for 3/4" (19mm) ID hose. ORDER NO. 46200-0010 3/4" (19mm) ID hose x Plug-in 90
Not Available
Not Available
NOTE: Older Style PUMPGARD STRAINERS are now replaced by the newer version with the bowl threaded to the base.
IN-LINE STRAINER
Injection Molded Polypropylene Body/Polycarbonate Lens with Stainless Steel Filter Screen.
Removable clear lens for ease of cleaning and changing filter. Filter is interchangable with Par Jabsco. Filter should be mounted above water level line and on suction side of pump.
A 3-9/16 3-9/16
B 4-1/16 4-1/16
C 2-9/16 2-9/16
691
Choose from a line of quality water systems designed to meet your needs.
* Indicates Parts Contained in Service Kit. Indicates Parts Supplied with Base Assembly. Jack Shaft Assembly includes new style connecting rod (37173-0001) with 5/16" diameter hole and two lock nuts. Previous pump models use a connecting rod (37173-0000) with a 1/4" diameter hole and bolt.
Small Pulley Large Pulley (with key way) Belt Jack Shaft Assembly Connecting Rod Assembly Diaphragm Plate Diaphragm Retainer Valve Set (Inlet & Outlet) Base Assembly (See ) Pressure Switch Ports (Inlet & Outlet) Small Pulsation Dampener Pulsation Dampener Small Bottom Plate Gaskets Vibration Pad Kit Hardware Kit Service Kit (See*)
3 4 5 6 7 8 9 10 11 12 13A 13 14 15 17 19 20 21
1 1 1 1 1 1 1 1 1 1 1 set 1
1 1 1 1 1 2 1 1 1 set 1
1 1 1 1 1 2 1 1 1 set 1
- for 36850 Series
37175-0000 37177-0000 37178-0000 35623-0000 37181-0000 37180-0000 37164-0001 30101-0000 * 1 set 1 set 1 set
* * 1
1 1 1
1 1 See note 2 1 1 1
35623-0000
1 set 1 set
1 set
Note 2: includes switch and conversion kit to mount new type switch onto older style-J and - 0000 pumps.
692
Choose from a line of quality water systems designed to meet your needs.
* Indicates Parts Contained in Service Kit. Indicates Parts Supplied with Base Assy. NOTE 1- For Model 37205-0000 use replacement motor number 30202-0000 (12 Volt Only). NOTE 2- For Model 37201-0000 use 2 each 35983-0000 diaphragm plates.
PAR Pumpgard In-Line Bilge Pump Strainer 46200-0000 3/4" Hose Barb 46200-0002 1/2" Hose Barb
Part Description Motor Kit 12 Vdc Motor Kit 24 Vdc Motor Mount Connecting Rod Assembly Diaphragm Retainer Valve Set (Inlet & Outlet) Base Assembly (See ) Ports (Inlet & Outlet) Pulsation Dampener Vibration Pad Kit Hardware Kit Service Kit (See *)
Key 1 2 7 9 10 11 12 13 15 20 21
1 1
X X
X X
Qty. 1 1 * 1
30003-0000* 44114-1000 37175-0000 37178-0000 44127-1000 37180-0000 44990-0058* 37166-0000 43990-0060 30120-0000* 43990-0063*
X X X X X
X X X X X
37174-0000 * 1 35788-0000 - Retainer 1 35816-0000 - Retainer Plate 1 30005-0000 * 1 set 35795-0000 1 37179-0000 * 1
X X X X
37168-0000 37182-0000 *
1 set
693
PAR-MAX 1
Miniature multi-outlet water pressure pump serves 1 or 2-3/8" (10mm) outlets at any one time. Models include both automatic and manual pumps. 1.1 gpm (4.3 lpm) open flow output. Self-priming up to 4ft (1.2m). Dual diaphragm operation. Thermal overload protection automatically stops motor should it overheat due to overload, with auto re-start feature. Diaphragm design allows dry running. Pressure switch cut-in 22 psi (1.5 bar), cut-out 35 psi (2.4 bar). Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection).
Fitting: Connections for 3/8" (10mm) ID hose and slip-on 1/2" (13mm) bushings. Size: 6.4" long x 3.5" wide x 2.3" high (16cm x 9cm x 6cm).
Description 12 Volt DC model, fuse 4 amp, automatic Pump head repair kit Pressure switch kit
694
Features: Snap-fit ports Three chamber design Distinctive style Corrosion resistant Soft rubber mounts Dry running capability Meets ISO 8846 design Self-priming up to 10 feet
Specifications : Model ORDER NO. / 12V ParMax 1.9 31295-0092 ParMax 2.9 31395-0092 NOTE:**Denotes Special Order Only
PSI 25 50
Fitting: Connections for 1/2" (13mm) ID hose or 1/2" (15mm) Qest fittings. Size: 15-1/2" long x 15-3/4" wide x 5-1/2" high (39cm x 40cm x 14cm). ORDER NO. Description 59451-1012 12 Volt DC model, fuse 10 amp, high pressure version 59451-1024 24 Volt DC model, fuse 6 amp, high pressure version
695
Description 24 Volt DC model, fuse 7 amp, high pressure 12 Volt DC model, fuse 10 amp, low pressure 24 Volt DC model, fuse 7 amp, low pressure Diaphragm kit
696
The DiMOND technology automatically runs diagnostics to detect common failures such as run dry, pump leaks, over current, under current, low voltage and over voltage. if the diagnostic discovers a problem, the pump will stop, identify the root cause, and provide the data you need to solve the problem. V-FLO is powered by a new variable speed drive that delivers the exact amount of water flow needed to perform a variety of onboard delivery tasks. Since the pump is constantly monitoring water flow and electrical current, it automatically adjusts itself as needed, ensuring that your systems are operating at peak efficiency. Features and Benefits 5.0 gallons per minutes (19 liters) DiMOND technology provides consistent water pressure Up to 50% less power consumption Learns the boats water pressure system to improve pump performance Kit includes 5.0 Water Pressure pump, Pumpgard Inline Strainer, Snap-Fit Port Fittings
ORDER NO.
Mfr. No.
42755-0092 42755-0092
PAR-MAX plus
TM
PAR-MAX 5 PLUS
NEXT GENERATION WATER PRESSURE PUMPS
Service up to five outlets with smooth flow and hassle-free operation The high pressure capability of the new Jabsco Par-max Plus Series water pressure pumps provides exceptional flow and consistent water pressure to easily handle the demand of multiple outlets. All Par-Max Plus models include soft rubber mounts and quick connect fittings for ease of installation. The patented Par-Max-Plus co-injected molded diaphragm and larger heavier duty motor brushes significantly extend pump life up to 50% longer than existing Jabsco Par-Max Series diaphragm pumps. The Par-Max Plus Series is self-priming up to 10 ft. (3m) and can run dry without damage. Its manufactured from corrosion resistant materials, capable of handling the harshest marine environments.
Features and Benefits Sealed switch and co-injected molded diaphragm, eliminates leak paths, extending the life of the pumps by up to 50% Jabscos robust electric diaphragm pump design, proven with over 7 million units in service Up to 50% less power consumption Automatic pressure switch, tested over 4 millions cycles without failure Quick disconnect ports, allow for ease of installation in hard to reach places Improved noise dampening rubber feet, significantly minimizes vibration when mounted against hard surfaces Certified to EN ISO 8846 Marine (Ignition Protection) Dimensions: 10.60" long x 5.09" wide x 4.72" high (27cm x 13cm x 12cm)
ORDER NO.
Mfr. No.
Fittings (2) 1/2" Male Thread (2) 1/2" Male Thread Elbow (2) 1/2" Male Thread (2) 1/2" Male Thread Elbow
697
Can be used in salt water systems for galley rinse water and deck and anchor washdown.
DIMENSIONS-in (mm) HEIGHT WIDTH LENGTH 10-1/8(260) 6-1/2 (165) 9-7/8 (251) 10-1/8(260) 6-1/2 (165) 9-7/8 (251) 8-3/8(213) 6-1/2 (165) 9-7/8 (251)
PAR 36950-SERIES
A popular pump for boats with two or three fixtures. A dependable, low maintenance pump able to run dry extended periods. Smooth belt drive and flexible mounts aid noise reduction. Pump protected against city water pressure by built-in check valve. Pulsation dampeners absorb water hammer and give smooth flow to fixtures. Low amperage motors conserve battery power. Ports fit 1/2" - 5/8" hose. This pump can be used in salt water systems for deck and anchor washdown, and galley rinse water.
36800-Series
36950-Series
AMPS/ DIMENSIONS-in (mm) FUSE SIZE HEIGHT WIDTH LENGTH 6/8 8-1/2 (216) 6-1/2 (220) 7-1/2 (191) 3/4 8-1/2 (216) 6-1/2 (220) 7-1/2 (191)
PUMPS WITH AC MOTORS CAN SPARK. EXPLOSION AND DEATH CAN OCCUR. DO NOT USE WHERE FLAMMABLE VAPORS ARE PRESENT. All DC voltage pumps shown above meet applicable ignition protection sections of the U.S. Coast Guard Electrical Regulations (Title 33, Chapter 1, Part 183, Subpart 1).
698
WASHDOWN PUMPS
For many years, Jabsco PAR MAX washdown pumps have been the preferred system for cleaning marine vessels, making it an industry standard. Thats because all Jabsco products are specifically designed to fit the expressed needs of boat builders and enthusiasts alike. FEATURES: High Pressure jet blasts mud and silt from anchor chain and decks Waterproof, sealed motors Dry running capability Thermal overload protection automatically stops the motor if it overheats PAR MAX Washdown standard models include: (1) Pumpgard Intake Strainer, (4) Quick Connect Port Fittings, (1) Trigger Pressure Nozzle
Model No.
PAR MAX 7
7 (26.5) 80 (5.5) Yes Yes Yes No 1/2" or 3/4" 12
PAR MAX 7
7 (26.5) 80 (5.5) Yes Yes Yes Yes 1/2" or 3/4" 12
PAR MAX 4
4 (15.1) 60 (4.1) Yes Yes No 3/4" 12
PAR MAX 4
4(15.1) 12 Yes Yes Yes
PAR MAX 3
3 (11.4) 12 Yes Yes Yes Circuit Breaker included with PAR MAX 7 models. (See chart)
ORDER No.
GPM / LPM Volts Pressure/Bar Strainer Nozzle Port Hose Size 25 ft. Coiled Hose Breaker
60 (4.1) 3/4"
Washdown Kit
82905-0092 & 82906-0092
Washdown Kit
The quick-disconnect nozzle can be removed from the hose and used at another outlet, without turning off the pump. Also performs well with other pumps.
ORDER NO. Description 30703-1000 Quick-disconect nozzle attaches to 3/4" GHT snap-in connector 30704-1000 Quick-disconect nozzle attaches permanently to 1/2" hose
699
PART NUMBERS
KEY 2 3 6 7 DESCRIPTION QTY Pressure Switch 1 Low Pressure Switch** 1 Body Kit 1 Plate/Piston Kit 1 Motor Kit 12 Vdc EMC 1 Motor Kit 12 Vdc 1 Motor Kit 24 Vdc EMC 1 Motor Kit 24 Vdc 1 Standard Port Kits: 1/2" Barb 2 1/2" Threaded (QEST) 2 3/4" Barb 2 Pumpgard Strainer 1 Spray Nozzle 1 30600-SERIES
37121-0010 44814-1000 30608-1000 30682-1000 18753-0575 18753-0576 18753-0451 30654-1000 30649-1000 46400-0002
30620-SERIES
37121-0010 44814-1000 30608-1000 30682-1000 18753-0577 18753-0463 18753-0578 18753-0464 30654-1000 30649-1000 46200-0000
30710-SERIES
37121-0010
N/A
30608-1000 30682-1000 18753-0572
N/A
18753-0573
N/A N/A
30653-1000 46400-0002
N/A
N/A
N/A
**Low Pressure Switch used on -0212 and -0224 models. NOTE: Model 30621-Series use 30620-Series components. Model 30630-0012 use 30620-Series 12V components except use 18753-0489 12V motor.
30700-03X2 30700-03X4
44050-1000
N/A
30608-1000 30682-1000 18753-0579 18753-0489 18753-0595 18753-0490
N/A
30608-1000 30682-1000 18753-0579 18753-0489 18753-0595 18753-0490 30654-1000
N/A N/A
30653-1000 46200-0000 30653-1000 46400-0000 30703-1000
N/A
46400-0002 30704-1000
N/A N/A
30653-1000 46200-0000
N/A
N/A
700
2 3 4 5
6* 7 8 9
701
Choose from a line of quality water systems designed to meet your needs.
* Indicates Parts Contained in Service Kit. Indicates Parts Supplied with Base Assy. ** 1/2" Threaded Outlet Port 37050-0001 1/2" Threaded Inlet Port 37050-0000 1/2" Flare Outlet Port 37050-0002 1/2" Flare Inlet Port 37050-0003 NOTE 1 - For Model 37205-0000 use replacement motor number 30202-0000 (12 Volt Only). NOTE 2 - Includes Switch and Conversion Kit to mount new type switch onto older style -J and -0000 pumps.
Part Description Motor Kit 12 Vdc Motor Kit 24 Vdc Small Pulley Large Pulley (with key way) Belt Jack Shaft Assembly Connecting Rod Assembly Diaphragm Plate Diaphragm Retainer Valve Set (Inlet & Outlet) Base Assembly (See )
Key 1 3 4 5 6 7 8 9 10 11 12
Part Number
30200-0000 30200-0010 37169-0000 37170-0001 30021-0000 35690-0001 37173-0001 35212-0000 30016-0000 35173-0000 30004-0000 35625-1100
Qty. 1 1 1 1 1 1 2 1 1 1 set 1
Part Number
Qty.
Part Number
Qty. X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X
* *
Pressure Switch Ports (Inlet & Outlet) Barb** Small Pulsation Dampener Pulsation Dampener Bottom Plate Vibration Pad Kit Hardware Kit Service Kit (See *)
13 15 16 17 19 20 21
37121-0010 1 37121-0000 - See Note 2 1 37176-0000 * 1 set 37177-0000 * 1 37178-0000 * 1 35623-0000 37180-0000 37165-0000 30121-0000
* * 1 1 set 1 set *
30200-0000 1 30200-0000 1 30200-0010 30200-0010 37169-0000 1 37169-0000 1 37170-0001 1 37171-0001 1 30021-0000 * 1 30022-0000 * 1 35506-0001 1 35689-0001 1 37173-0001 1 37173-0001 1 35503-0000 2 35503-0000 2 30015-0000 * 1 30015-0000 * 1 35497-0000 1 35497-0000 1 30004-0000 * 1 set 30004-0000 * 1 set 35625-1100 1 44114-1000 1 35625-1200 - for 36850-Series 44114-1100 1 35620-1200 - for 36955-Series 37121-0010 1 37121-0010 1 37121-0000 - See Note 2 1 37121-0000 - See Note 2 37176-0000 * 1 set 37176-0000 * 1 set 37177-0000 * 1 37178-0000 * 1 37178-0000 * 1 44127-1000 * 1 35623-0000 37180-0000 37180-0000 * 1 set 43990-0058 * 1 set 37165-0001 1 set 43990-0071 1 set 30122-0000 * 30126-0000 * 43990-0061 *
702
Choose from a line of quality water systems designed to meet your needs.
* Indicates Parts Contained in Service Kit. Indicates Parts Supplied with Base Assy. ** 1/2" Threaded Outlet Port 37050-0001 1/2" Threaded Inlet Port 37050-0000 1/2" Flare Outlet Port 37050-0002 1/2" Flare Inlet Port 37050-0003 NOTE 1 - For Model 37205-0000 use replacement motor number 30202-0000 (12 Volt Only). NOTE 2 - Includes Switch and Conversion Kit to mount new type switch onto older style -J and -0000 pumps.
Part Description Motor Kit 12 Vdc Motor Kit 24 Vdc Motor Kit 32 Vdc Motor Mount Small Pulley Large Pulley Belt Jack Shaft Assembly Connecting Rod Assembly Diaphragm Retainer Valve Set (Inlet & Outlet) Base Assembly (See )
Key 1
2 3 4 5 6 7 9 10 11 12
Qty. 1
Part Number 30201-0000 - See Note 1 30201-0010 35812-0000 Body Kit 44010 3 N/A
Qty. 1
Part Description
Qty.
Body Kit 44020 Valve Kit 4 30033-0000* 1 X X X X X X X X X X 37179-0000* X X X X X X 37167-0000 30127-0000* 1 set 1 1 X X 30033-0000*
N/A N/A
30015-0000* 1 35454-0000 1 30004-0000* 1 set 44114-1100 1 44114-1100 * 1 37121-0010 1 37121-0000See Note 2 37176-0000 1 set 37178-0000* 1 44127-1000* 1 37180-0000 1 set 43990-0058 1 set 37167-0000 1 set 30123-0000 43990-0064 * *
37174-0000* 35799-0000 1 30130-0000* 1 set 35787-1000 1 35790-0000 - for 37205-0000 37121-0010 37121-0000 -See Note 2 1 1
N/A N/A
Pressure Switch Ports (Inlet & Outlet) Barb** Small Pulsation Dampener Pulsation Dampener Small Bottom Plate Vibration Pad Kit Hardware Kit Service Kit (See*)
13 15 16 17 18 20 21
X X X
Model 44010-2000 uses high pressure switch * Note: Models 44010 - 2010 & 440102011 use low pressure switches. Model 44020 - Series not fitted with a pressure switch
703
Features: Self priming up to 8 feet (2.4 m) Can run dry without damage Chemical resistant material Internal bypass standard Built-in back flow preventer Heavy duty ball bearing drive system UL, CSA & CE models available
Specifications: Pump: Positive Displacement two piston design Flow Rate: 1.6 GPM (6.05 L/min) Ports: 3/8" NPT female Motor: Permanent magnet with solid state rectifier Voltages: 12 V DC Dry Vacuum: Up to 8 feet Pressure Switch Setting: 60 PSI Maximum Fluid Temperature: 140F Wetted Parts: Polypropylene Net Weight: 4 to 5 lbs. (2.28 kgs)
Volts 12 VDC
PSI 60 psi
Volts 12 VDC
Fuse Amps 7
704
Smooth Water Flow, Pumps over 3.3 GPM (12.5 l/min) Delivers smooth, steady water flow from 1 to 3 GPM without the need for a accumulator tank Special internal bypass feature eliminates pulsating water and pressure switch chatter Designed for up to 5 fixtures Runs dry without harm to the pump Includes plug-in ports for easy installation:
Two 1/2" Qest ports Two 1/2" hose barb ports Install with new FLOJET strainer (not included) to protect pump from debris
ORDER NO. Model
Open Flow GPM (l/min.) 440-51430 04405143A12V dc 3.3 (12.5) Volts Pressure Shut Off 35 PSI Amp Draw @10 PSI (0.7 bar) 3.9 Strainer Included No
440-51430 Dimensions:3.75"H x 6.3"W x 8.2"L (95 x 160 x 208 mm) Shp. Weight: 3.9 lb. (1.8 kg.) 35 psi = 2.5 bar Service kit 204-09043
For use with a 1 to 5 gallon (3-20 liter) accumulator tank - 4.5 GPM (17.0 l/min) Designed for 6 or more fixtures Provides quiet operation and smooth flow Runs dry without harm to the pump Includes plug-in ports for easy installation: Two 3/4" hose barb ports Two 3/4" garden hose ports Install with new FLOJET strainer (included) to protect pump from debris
ORDER NO. Model
Open Flow GPM (l/min.) 432-51430 04325143A 12V dc 4.5 (17) Volts Pressure Amp Draw Strainer Shut Off @10 PSI (0.7 bar) Included 40 PSI 6.0 Yes
432-51430 Dimensions: 3.75"H x 6.3"W x 9.9"L (95 x 160 x 252 mm) Shp. Weight: 6.0 lb. (2.8 kg.) 40 psi = 2.8 bar Service kit 204-09043
284-01000 Dimensions: 7.2"H x 11.3"W x 12.8"D (191 x 286 x 325 mm) Shp. Weight: 8.8 lb. (4 kg.) Service kit 204-09043
Integrated pump and accumulator tank system Compact design installs easily in convenient locations May be mounted vertically or horizontally Supplies 4.5 GPM (17.0 l/min) up to 6 GPM (22.7 l/min) with fully charged tank Can run dry without harm FDA materials in pump and accumulator tank for drinking water Self-priming up to 10 ft. (3.1M) Includes assorted ports for easy installation Accumulator tank has total volume of 1.1 Gal. (4.1 L)
ORDER NO. Model
Open Flow Pressure Max Amp GPM (l/min.) Shut Off 284-01000 02840100A 12V dc 4.5 (17) 40 PSI (2.8 bar) 10.0 Volts
Transfer pump for shower and grey water Runs dry without damage to the pump Manual on/off switch or automatic level control may be connected to pump (Not provided) 12 Volts dc Includes plug-in ports for easy installation: Two 1/2" hose barb ports Install with new FLOJET strainer (not included) 3/4" port fittings and strainer also available
ORDER NO. Model
Open Flow GPM (l/min.) 410-51430 04105143A 12V dc 3.3 (12.5) Volts Pressure Amp Draw Strainer Shut Off @10 PSI (0.7 bar) Included N/A 4.0 No
410-51430 Dimensions: 3.75"H x 6.3"W x 8.2"L (95 x 160 x 208 mm) Shp. Weight: 3.9 lb. (1.8 kg.) Service kit 204-09043
Compact automatic demand water system pump Supplies up to 3 fixtures, one or two at a time Built-in pressure switch automatically
starts and stops pump when faucet is opened and closed
ORDER NO. Model
Volts
Self-priming so pump can be located above water tank Runs dry for extended periods of time Built-in thermal protector Also available without switch for manual
application
122-02020 122-00020 Dimensions: 2.3"H x 3.5"W x 6.2"L (58 x 89 x 157 mm) Weight: 1.3 lbs. (.6 kg.)
Open Flow Pressure Amp Draw Strainer GPM (l/min.) Shut Off @10 PSI (0.7 bar) Included 122-02020 LF122202A 12V dc 1.1 (4.3) 22PSI-35PSI 1.9 No (1.5-2.4) 122-00020 LF122002C 12V dc 1.1 (4.3) N/A 1.9 No
705
Automatic high performance pump for deck and anchor wash down Self-priming Automatic pump shut-off feature when hose nozzle is in off position For fresh or salt water use May also be used for full flow bait tank circulation Includes plug-in ports for easy installation:
Two 3/4" hose barb ports ORDER NO. Model Two garden host ports Pressure nozzle, non-corrosive and 3/4" hose barb inline strainer 432-51430 4325-143A 432-51431 4325-143L
*Nominal amp draw @ 10 PSI (.7 bar); amp draw @ 40 PSI (2.8 bar) = 9.2 amps (12V) Dimensions: 3.75"H x 6.3"W x 9.9"L (95 x 160 x 252 mm) Shp. Wt. 6.0 lb. (2.8 kg.) 20-40 psi = 1.4-2.8 bar Service Kit 204-09043
Nozzle No Yes
Delivers over 4.5 GPM (17.0 l/min) Powerful favorite in the sport fishing, commercial fishing and work boat markets 'L' includes nozzle and strainer* New larger motor for more power Delivers over 3.5 GPM (13.5 l/min) Ideal for cleaning pleasure boats, fish boxes, scaling stations, anchor chains & dinghies Great value for recreational boat users 'A' includes strainer; 'L' includes nozzle and strainer May also be used for full flow bait tank circulation
Dimensions: 3.75"H x 6.3"W x 8.6"L (95 x 160 x 218 mm) Shp. Wt. 4.5 lb. (2.1 kg.) 20 - 40 psi = 1.4 - 2.8 bar Service Kit 204-09043
PREMIUM MODELS
Strainer Yes
Nozzle Yes
Dimensions: 3.75"H x 6.3"W x 9.9"L (95 x 160 x 252 mm) Shp. Wt. 6.0 lb. (2.8 kg.)
Self-primes up to 10 feet above the bilge Runs dry without damage to the pump Manual on/off switch or automatic level control may be connected to pump (Not provided) Discharges over 5 GPM (18.9 l/min) Draws only 8.0 Amps at 10 PSI 12 Volts dc Includes plug-in ports for easy installation:
Two 3/4" hose barb ports Two garden hose ports Also includes new 3/4" hose barb inlet strainer
ISO 8849 Certification Pressure 0kPa 10kPa 20kPa Litres/min 18.9 17.5 15.0
Volts Open Flow DC GPM (l/min.) 412-51140 4125-114A 12V dc 5.0 (18.9)
Strainer Yes
Nozzle No
Diesel Fuel Transfer Liquid Transfer Jobs Dockside Pumping Dewatering or Circulation Engine Oil Changing Bait tank/Livewell pumps are calibrated for correct water movement (6 water changes per hour) Important for maintaining lively bait Model 4105-501 for use with 15 - 30 gallon tanks (60 - 120 liter) Model 4125-502 for use with 30 - 50 gallon tanks (120 - 200 liter) General purpose pumps are fitted with oil resistant elastomers,
Model 4105 Series - 3.3 GPM (12.5 l/min.) Model 4125 Series - 5.0 GPM (18.9 l/min.)
allowing pumping of diesel fuel, used warm ORDER NO. Model Volts Open Flow Pressure Amp Draw Strainer engine oil and liquid transfer or dewatering DC GPM (l/min.) Shut Off @10 PSI (0.7 bar) Included Self-priming. May be mounted above the water line 410-55010 4105-501 12V dc 3.3 (12.5) N/A 3.6 Yes Designed with heavy duty ball bearings, 412-55020 4125-502 12V dc 5.0 (18.9 N/A 8.0 Yes thermal overload protection and a continuous duty motor for long life 4105 Models 4125 Models Provides quiet operation and smooth flow Dimensions 3.75"H x 6.3"W x 8.2"L (95 x 160 x 208 mm) Dimensions 3.75"H x 6.3"W x 9.9"L (95 x 160 x 252 mm) Shp. Wt. 6.0 lb. (2.8 kg.) Shp. Wt. 3.9 lb. (1.8 kg.) Runs dry without harm to the pump Includes plug-in ports for easy installation: NOTE: Positive displacement pumps, like those must be operated with an on/off switch. Do not shut off these pumps with a valve. Two garden hose ports Two 3/4" hose barb ports Also includes a 3/4" inlet strainer WARNING: PUMPS ARE NOT TO BE USED FOR PUMPING GASOLINE OR FLAMMABLE LIQUIDS.
EXPLOSION AND DEATH COULD OCCUR.
706
Operates at maximum performance with FLOJET Premium and Premium Plus Washdown Pumps Corrosion-free, tough thermoplastic material and stainless steel spring Quick-Disconnect allows you to remove nozzle while pump is on Spray range from fine mist to full volume blast ORDER NO. 204-46000 Adjustable lock in position allows for effortless spraying
QUAD II SERVICE PARTS
NOTE: FLOJET Parts & Accessories which we do not stock can be Special Ordered.
MOTOR
PUMP HEAD
PRESSURE SWITCH
204-19002 204-19001
020-09080*204-06002 020-09073*204-06003
* Requires new mounting feet (Kit # 207-17100) when used with three-footed Quad Pumps.
QUAD II ACCESSORIES
FLOJETS 'QUICK-CONNECT' PORT SYSTEM
Quick-Connect Quad port system makes hose removal easy and allows for fast winterizing and system draining. All Quad ports fit directly into pump and are compatible with new Quad II pumps. Two ports are included in each Quick-Connect package.
INLET STRAINERS
Installation 1. Move slide back. 2. Push port all the way in. 3. Move slide forward to lock.
203-81000
203-81002 203-81006
203-81007
203-81008 203-81009
203-81010
ORDER NO. INLET 174-00000 3/4" Barb 174-00020 1/2" Barb 174-00030 3/8" Barb 174-00040 1/2" M Qest 174-00100 3/4" Barb 174-00120 1/2" Barb 174-00140 1/2" M Qest
OUTLET 3/4" Barb 1/2" Barb 3/8" Barb 1/2" M Qest Quad Port Quad Port Quad Port All Quad Ports are 90 elbows.
QUAD PORT x QUAD PORT x QUAD PORT x QUAD PORT x 1/2" MALE QEST, 1/2" HOSE BARB, 3/4" HOSE BARB, GARDEN HOSE STRAIGHT STRAIGHT STRAIGHT ADAPTER
QUAD PORT x QUAD PORT x QUAD PORT x 1/2" MALE QEST, 1/2" HOSE BARB 3/4" HOSE BARB, 90 ELBOW 90 ELBOW 90 ELBOW
The above part numbers are packaged with 2 fittings per bag. QEST is a registered trademark of U.S. Brass For more
707
Self-Priming Sealed Switch Run Dry Capability Seamless Shell E-Coated Motor Ignition & Thermally Protected 45 PSI Shut Off Pressure Multi-Fixture Application 3 Year Warranty Listed
LIMITED QUANTITIES
Voltage 12VDC
Amps 10
Self-Priming Sealed Switch Quiet Performance Seamless Shell E-Coated Motor Run Dry Capability Ignition & Thermally Protected 55 PSI Shut Off Pressure Multi-Fixture 3 Year Warranty Listed
ORDER NO. 390-10216 Mfr. No. 3901-0216 Voltage 12VDC Dimensions 7.3 x 5.0 x 4.6 Flow Rate 3.0 GPM Amps 5 Shut-Off Pressure 55 PSI Valve Assembly 094-70602
Adjustable Flow Valve 3/4" and 1-1/8" Full Port Fittings Included Low Profile Design Nylon Construction Listed
For more information see: www.shurflo.com
708
ORDER NO.
Mfr. No.
Voltage 12VDC
Amps 10
414-81530-75 4148-153-E75
ORDER NO.
Mfr. No.
Voltage 12VDC
Amps 15
415-81530-75 4158-153-E75
709
50 Mesh Screen Protects Pumps from Harmful Debris High Capacity Rugged Nylon Housing with Clear Twist-Off Polyamide Bowl Easy to Clean Slide-Out Screen ORDER NO. 254-26600 Without bracket
Mfr. No. 254-266
710
424-81530-09 4248-153-E09
711
50-mesh SS screen Easy to install to pump head Clear, clean plastic construction makes
it easy to see when cleaning is needed Keeps debris out of the pump Easy disassembly for cleaning
This combination water regulator and check valve diaphragm design prevents high-pressure damage often caused by city water systems. Leak-tight, stress & crack-resistant, these high-performance water entries limit water pressure safely to 65 PSI while meeting or surpassing all check valve code requirements. 1 Year Warranty
VALVE ASSEMBLIES
ORDER NO. 094-03001 094-23206 094-66900 094-70602 094-80001 Mfr. No. 94-030-01 94-232-06 94-669-00 94-706-02 94-800-01 Description Valve Assembly for 5901 Series Pumps Valve Assembly for 2088/2093 Series Pumps Valve Assembly for 4901 Series Pumps Valve Assembly for 2901/3901 Series Pumps Valve Assembly for 4148/4158/4248 Series Pumps
183-02914
183-02918
712
PUMPGARD STRAINER
Inlet strainer protects all electric diaphragm pumps.
Fitting: Choose connections for 3/8", 1/2", 3/4" ID hose, or 1/2"-14 pipe. Size 4-3/4" long x 2-3/4" wide x 2-1/2" high (12cm x 7cm x 6cm).
Mfr. No.
01750-145A 01750-245A 01750-045A
Connections
Panel Mount - White Panel Mount - Chrome In-Line - White
175-01450 175-02450 175-00450
Connections
1/2" slip-on hose inlet and outlet
Maintains 40 Ibs. of pressure on hose Adjustable from 10-60 psi Factory set at 40 Ibs.
For more information see: www.nhsmarine.com
ORDER NO. 144-00201
Mfr. No
201A
Description
Water Pressure Regulator
713
MODEL - WD 3.5
Dimensions: Motor: 120 W, 12/V DC Length 9.31" (236.5 mm) Width: 8.25" (210 mm) Height: 4.575" (116 mm) Weight: 4.5 Ibs. (2 kg.)
MODEL - WD 5.2
Dimensions: Motor: 185 W, 12/V DC with built-in thermal protection Length 9.46" (240 mm) Width: 8.42" (214 mm) Height: 4.33" (110 mm) Weight: 4.5 Ibs. (2 kg.)
Description Capacity 13 I/min-3.5 GPM Pressure Cut Off 5 bar - 70 psi Fuse Size 15 A Connection 1/2" NPT / hose 3/4", GHT 3/4", 3/8" BSP x 1/2" barb 1/2" NPT / hose 3/4", GHT 3/4", 3/8" BSP x 1/2" barb
Mfr. No.
101-34077
20 I/min-5.2 GPM
5 bar - 70 psi
20 A
101-34067 10-13406-107
20 I/min-5.2 GPM
15 A
714
he Flow Master 5.0 is a five chamber positive displacement diaphragm pump that is an ideal choice for pressurizing water in a closed system such as that found in a boat or recreational vehicle. The digital controller automatically adjusts water flow as the demand is increased and decreased while maintaining a very smooth flow. The unique variable flow feature of the Flow Master pump allows the pump to be mounted without an accumulator tank and still maintain an even flow regardless if one or multiple taps are being used. Exclusive soft start feature of pump makes it virtually silent when low water flow is required. Stainless steel base plate and fasteners for corrosion resistance and the motor has built in thermal overload protection. Comes standard with PUMProtector inlet strainer and multiple port options for most applications.
Specifications: Dimensions Weight Motor Body Valves Diaphragm Capacity Cut-Off Pressure Fuse size Connection
9.4"long x 8.22" wide x 4.49" high 4.5 Lbs. WPS 5.0 - 150 W, 12Volt DC (with built-in thermal protection) Nylon/Polypropylene Santoprene/EPDM Santoprene 19L/min - 5 GPM 3.5 bar/50 psi 15 A 3/8" NPT / hose 1/2", 1/2"NPT / hose 3/4", 1/2" - 14 NPSM 1/2" CTS
Quiet 5 chamber diaphragm pump design 5.2 GPM/20 I/min Wash Down Pump Max. Pressure 5 bar (70 psi) Duty Cycle: Intermittent, Max 20 min. Connection 3/8" BSP, 1/2" hose - 1/2"NPT, 3/4" hose - 3/4" GHT 25' Coiled hose (7.5 m), hose 1/2" I.D Includes easy-push connectors 3/4" hose & 3/4" GHT (garden hose) Suitable for fresh and salt water Can be run dry without damaging pump Corrosion resistant construction Self-priming With integrated auto pressure switch to turn on & off (When nozzle is open/closed) PUMProtector inlet strainer (Easy to push-in) Spray nozzle with pistol grip rear trigger design Unique adjustable flow control dial Ignition protected according to ISO8846
For more information see: www.johnson-pump.com
Mfr. No. 64534CL ORDER NO. 106-64534-CL (12V) (Clam Shell Packaging)
715
10-24571-51
151 mm / 5.95"
106 mm / 4.17"
50 mm / 1.97"
3.5 lbs
5/8"
10-24572-51 10-13021-95
50 mm / 1.97" 65 mm / 2.56"
4 lbs 13 lbs
5/8" 1"
10-13021-96
217 mm / 8.54"
160 mm / 6.3"
65 mm / 2.56"
13 lbs
1"
Technical Specifications:
Capacity: Max. Head: Max. Lift: Max. Head & Lift: Dimensions: 16 I/min (4.2 GPM) open flow (15 I/min at 0.1 bar) 3 meters (9.8 feet) 3 meters (9.8 feet) 4 meters (13.1 feet) 186 mm - 7.32 long 235/181 mm - 9.25"/7.13" wide 118/204 mm - 4.65"/8.03" high KlickTite XL connectors for 1" hose or 3/4" hose and 1/2" NPT/1/2" - 14 NPSM threads; straight and 90 40 W at 1m head, 12 VDC ( with built-in thermal protection) Nylon glass-fiber reinforced Nitrile rubber Reinforced nitrile rubber
Connection:
Mfr. No. 10-13350-03 Features: Ignition protected motor, conforming with ISO 8846 Marine Mounting bracket for easy replacement Extremely energy efficient Rotary cutter casing of PET (thermoplastic polyester) Directly connected to sewage tankline or holding tank Hose Connectin: Inlet 1-1/2" dia. Hose or 1-1/2" NPT Outlet 1" hose
ORDER NO 102-44531
Motor 12VDC
Impeller 671-00007
Width 4.25"
Height 3.23"
VACUUM SWITCH For automatic shut off operation to prevent pump damage
The vacuum switch works with all self-priming impeller pumps and should be used for e.g. bilge pumping/emptying of tanks to prevent the pump from dry running. The vacuum switch automatically shuts the pump off when the bilge/tank is dry. With the switch fitted, you can start the pump by remote push button or manually by depressing lever on the switch.
ORDER NO. 671-45053
Mfr.No. 09-45053
Mfr.No. 09-46553
716
REPLACEMENT PARTS 09-45594 09-1077B-9 0.2233.402 Service Kit Impeller (Nitrile) Lip Seal
F2P10-19
Pump body: Shaft: Impeller: Seal: Hose Connection: Motor: PTMT (thermoplastic polyester) Stainless Steel 09-1077B-9 (nitrile) Lip seal 1/2" (dia. 13 mm) 12 V DC, ignition protected
Dimensions and weight Length: 6.77" Width: 4.61" Height: 3.07" Weight: 3.53 lbs. Multi-Purpose Pump 3.8 gpm / 1/2" hose barb Mfr. No. 10-24180-1 ORDER NO. 102-41801
F3B-19
Pump body: Bronze. Connection for vacuum switch Shaft: Stainless Steel Impeller: 09-1052S-9 (nitrile) Seal: Lip seal Hose Connection: 3/8" NPT Motor: 12 V DC Dimensions and weight Length: 6.7" Width: 4.4" Height: 3.22" Mfr. No. 10-24516-03 Weight: 4.5 lbs. ORDER NO. 102-45163
REPLACEMENT PARTS
671-10007
09-45595
671-00007+ 09-1052S-9 Impeller (Nitrile) 671-20004+ 0.2233.007 671-30006+ 0.2173.436 + Items contained in Seal Kit.
F4B-19
Pump body: Shaft: Impeller: Seal: Hose Connection: Motor: Bronze Stainless Steel 09-824P-9 (nitrile) Lip seal 1-1/2" NPT 12 V DC
ACCESSORY Wash Down Kit 094-65530 09-46553 Includes Pressure Switch, Check Valve & Nozzle REPLACEMENT PARTS for 102-472703 & 102-46893
671-10010 671-00022+ 671-20004+
Service Kit Impeller (Nitrile) Lip Seal Gasket / O-Ring End Cover Screw
Dimensions and weight Length: 8" Width: 4.72" Height: 3.54" Weight: 6.6 lbs.
671-06597+ 671-04643+
717
CHECK-TEES
These check-tees provide a combination check valve and tee that replaces additional connections for RV and marine hookups. Check-tees allow water to flow in from the dockside connection without filling the tank. They are constructed of tough ABS plastic. Combination Inlet / Threaded Outlet Inlet has combination fitting: comes with 3/8" barbs that can be removed to accommodate 1/4" NPT fitting. Outlet is 1/2" NPSM. 1/2" NPT fitting for dockside water connection. Mfr. No. 6115A1
ORDER NO. 106-61151
Use as a 3-way manual pressurized or electric 12 Volt DC drinking water faucet,with 106-61260 Potable Water Pump. Delivers water immediately. Includes adapters for 3/8'' ID hose or 1/4" tapered male thread fitting. Single fixture eliminates the need for separate faucets on separate water systems. Description: 3-way electric with 3/8" and 1/4" adapters ORDER NO. 106-61420 Mfr. No. 6142-5
Combination Fittings Inlet and outlet have combination fittings: comes with 3/8" barbs that can be removed to accommodate 1/4" NPT fitting. 1/2" NPT fitting for dockside water connection. Mfr. No.6115-1
ORDER NO. 106-61150
718
GALLEY PUMP
Injection Molded Delrin ORDER NO. 425-17060 425-17065 Mfr. No. 517060-3 517065-1 OUTPUT 3 gpm Pump Repair Kit A 1/2" hose FASTENER #8 RH
OVAL BOWL SINK 300 SERIES SATIN FINISH 16 GA. STAINLESS STEEL
A 1-1/2
B 13-1/4
C 11-1/4
D 10-1/2
E 8-9/16
F 5-5/16
Zinc/Stainless Straight 2
*Drain tube used on Oval sink ORD. # 425-17425 Mfr. No. 517515-1 ORDER NO. 425-17515
*Sink Drain with Strainer used on sink # 517415 & 517445 Mfr. No. 517525-1 ORDER NO. 425-17525
SHOWER SYSTEM
Aft-Deck Shower These shower systems install flush in the transom or under the gunwale. Includes hinged cover and replaceable sprayer head. Fixtures are corrosion resistant. Housing and cover are made of high-impact, UV resistant, engineering-grade plastic and are pre-drilled for six #8 screws. Comes with 6' hose, shut-off, and hot/cold mixing controls. Connects to freshwater system for showering. ORDER NO. 104-41310 Mfr. No. 4131-4 Function Hot/Cold Hose Length 6'
719
TYPE
Capacity
Dimension LxWxH 10" x 5" x 4" / 25.4cm x 12.7cm x 10.1cm 10" x 5" x 4" / 25.4cm x 12.7cm x 10.1cm
GUZZLER 400 400 Horizontal 10 GPM / 37.9L 400 Vertical GUZZLER 500 438-05000 500 Horizontal 15 GPM / 67.5L 438-05001 500 Vertical
438-04000 438-04001
7" (12.8cm)
SEA-LECT Y-VALVE
Use the SEA-LECT Y-Valve with any pump - portable, electric or mounted hand-pump. It can be mounted in any handy place between the pumps intake and the hose leading to the boats low water points. Fits 1", 25.4 mm I.D. hose or 1-1/2", 31.8 mm I.D. w/adapters.
For use with Guzzler 400 & 500 Vertical Mount Pumps only. Mfr.No. 34
ORDER NO. 438-00340
Sea-Lect Y-valve Model BM-95 Size 1'' for Guzzler 400 1-1/2'' for Guzzler 500
Description Handle Only (Vertical) / 400 & 500 Horizontal Handle w/Actuator / 400 & 500 Diaphragm (Buna-N) / 400 & 500 Flapper Valves (pr.) / 400 Flapper Valves (pr.) / 500 Service Kit / 400 Service Kit / 500
1
Fig. 1. 1. 2. 2.
ORDER NO. 438-00740 438-00750 438-00840 438-00850
2
Description Foot Valve for Guzzler 400 Foot Valve for Guzzler 500 Suction Hose Strainer / 400 Suction Hose Strainer / 500
720
HAND/DIAPHRAGM PUMPS
5 Year Warranty
HANDPUMPS
KAYAK PUMP
Large handle for easier operation Stainless steel piston rod for strength & durability Easily disassembled for cleaning 1-1/2" barrel diameter means quick pumpouts Includes 24" of 1-1/8" black bilge flex hose
ORDER NO. 382-05440 382-05450 382-05480
Stainless steel piston rod for strength & durability Comes with pump float
ORDER NO. 382-05441
Description 13.5" Bilge Pump 21" Bilge Pump 34" Bilge Pump
Light, tough, durable easy handling, extra fast pumping hand pumps are ideal stow aboards. Comfortable handle grip and extra large capacity makes manual pumping somewhat less of a chore. Ideal for emergency pumping and where electrical current is not available. General Features: High Impact plastic Chemical and fuel resistant plunger 8 strokes per gallon 100% factory tested 1-1/8" discharge with 3 hose Size:18" 3 year warranty
ORDER NO. 847-20195 Mfr. No. 20195
AMAZON UNIVERSAL
For mounting on bulkhead, through bulkhead, on deck, or through deck (with optional through deck kit). Readily achievable 22 gallons/min output Features: Unique safety feature allows operation from both inside and outside the cabin (with optional Through deck kit) Flow rate of up to 25 gpm Self-priming up to 10 ft Push-fit inlet and outlet elbows swivel through 360 to increase flexibility of installation Corrosion resistant materials throughout Quick release clamp ring gives fast access for blockage clearance 1-1/2 ports give excellent solids handling ability for use with holding tanks Stainless steel handle supplied with mounting clips and provision for safety lanyard Dimensions: 9-1/2W x 9-1/2H x 6 D Connections for 1-1/2 ID hose # 29279-0000
ORDER NO. Description 29270-0000 Universal Pump, with detachable handle and one push-fit elbow 29279-0000 Optional through deck kit 29266-1000 Additional push-fit elbow Through Deck Kit for Universal Pump
On Bulkhead
HAND DIAPHRAGM PUMP 29270-0000 Universal pump, with detachable handle and one push-fit elbow included
# 29295-1011 In-Line non-return valve for 4-1/4"L x 2-1/2"W x 2"H (19mm) ID Hose
721
ACCUMULATOR TANKS
PRESSURIZED ACCUMULATOR TANK
A more compact pneumatic bladder to fit smaller systems and spaces
Internal bladder Smoother and more even flow Quieter water system Better temperature control Long pump life Lower battery drain Snap-in Barbed 1/2" Threaded (QEST) Simply fitted to new or existing systems 1/2" Hose Fittings Hose Fittings Compact size Snap-in port fittings include both: 1/2" barbed hose fittings and 1/2" threaded hose fittings Tank: hygienic, light, compact, impact and pressure resistant plastic construction
Diameter: 4-3/4" (119mm) Height: 13-1/4" (337m ORDER NO. 30573-0000 30649-1000 Description 1 quart (1 litre) Accumulator Tank Snap-in port fittings for 1/2" female threads Bladder Accumulator Tank Note: Pressure switch can be mounted on tank
MINI-ACCUMULATOR TANK
Improves all pressure controlled water systems. Our new compact 21 oz (0.6 Liter) accumulator tank fits into those tight areas, and performs all of the same functions as our 1 Quart model (1 Liter), but in a smaller package. Smoother flow, quieter water systems Internal rubber membrane eliminates maintenance and allows universal mounting Better control of hot water temperatures Simply fitted to new or existing systems Longer pump life, lower battery drain Snap-in port fittings Specifications: Size: 21 oz. (0.6 liter) 4-3/8" deep x 4-3/4" wide x 7" high (11cm x 12cm x 18cm) Weight: 21 oz. (0.6 liter) 1lb (0.45 kg) Fitting: Connections for 1/2" (13mm) ID hose, ORDER NO. 30573-0003 30649-1000 Description Mini Accumulator Tank, 21 oz. (0.6 Liter) Snap-in port fittings for 1/2" female threads
Will smooth flow from faucets and shower, reducing pump cycling and eliminating pulsations and water hammer Water is totally separated from air chamber and metal tank by a bladder and polypropylene tank liner Mounts horizontally, vertically, or upside down Includes brackets and band clamps Pre-pressurised to 20 psi (1.4 bar) Tank may be fine-tuned to cut-in pressure of pump 2 gallon tank 100 psi (6.9 bar) maximum working pressure Connection for 3/4" NPT male thread
Diameter: 8" (200mm) Height: 12-5/8" (320mm) ORDER NO. 18810-0000
722
Description
12 Volt dc model, fuse 10 amp
Diaphragm kit
723
Capacity: Capacity: Voltage: Amperage: Fuse Size: Intake Hose: Discharge Hose: Dimensions: Weight:
972 GPH Straight (13.6 V): 61 l/min 1.0m head (13.6 V): 844 GPH / 53 L/min 12 V 3.4 A / 2 A 5A/3A 1 x 3/4, 1 x 3/4 or 1 x 1, 1 x 1-1/8 or 1 x 1-1/2 3/4 11.5 L X 8.26 W X 5.7 H 2.3 lbs.
Mercury free
Mercury free
724
SHOWER ACCESSORIES
MARINE SHOWERHEAD
Enjoy longer showers with this ergonomically designed, handheld showerhead. Convenient on/off switch allows you to pause the flow of water while shampooing, greatly reducing the amount water used. No more rushing through your shower to conserve water. Multi-featured showerhead allows you a choice of four spray patterns. From a drenching rain to a gentle massage, you can personalize your shower with your favorite comfort settings.
ient ven Con /OFF ON itch Sw
Heavy-duty construction for years of use Produces 2.5 GPM with 40psi or 1.7GPM with 25psi at the water source
POP-A-TOOTHBRUSH
Protect and store toothbrushes with easilyinstalled holder that guards against dust and germs. Cover opens automatically when toothbrush is pulled forward. Vented for quick drying. Double-sided tape allows for permanent mounting. Mfr. No. 57203 ORDER NO. 668-57203
Super heavy duty hoses are reinforced for maximum kink resistance Drinking water safe Made of FDA approved materials
Description Fresh Water Hose, 5/8" ID., 25 Feet Fresh Water Hose, 5/8" ID., 50 Feet Fresh Water Hose, 5/8" ID., 75 Feet
725
Easy pump-out in tight bilge areas Water Transfer General wash-down Baitwell aeration Rapid diesel refueling and transfer Deck showers Dinghy pump-out Sink draining
ORDER NO. 272-05003 272-05004 272-02803 272-02804 272-02001 272-02003 272-02002 Mfr. No. iL500P iL280P iL200 iL500PK Flow Rate 500 GPH 280 GPH 200 GPH 200 GPH 500 GPH Kit Amps
Model iL500PK
6 amp 4.5 amp 4.5 amp 4.5 amp 2.8 amp 6 amp
Liquid
Water/Diesel 3/4 Water/Diesel 1/2 Water/Diesel 1/2 Water/Diesel 1/2 Water only Water/Diesel 3/4
Outlet Hose
Max Temp.
Easy conversion for in-line pumping applications. Strainer removes for hose attachment to inlet nozzle Pumping up to 32 feet of head
Up to 14 psi for washdown applications
726
UTILITY PUMPS
EVACUATOR 8000 - HIGH CAPACITY DEWATERING PUMP 12 VDC - 8000 GPH
The Evacuator 8000 represents the largest entrant in the upcoming Evacuator line of high efficiency portable utility pumps. Providing a sizeable 8000 GPH flow rate, the EV8000 represents the highest flow rate offering in the Evacuator product series. Designed as an alternative to gas or diesel powered portable pumps, the EV8000 excels in work environments requiring fast, efficient removal of large concentrations of standing or flooding water. Similar to the other Evacuator pumps, the EVA8000 benefits from the same innovative power connection which allows for direct operation from your vehicles 12 volt battery, via two heavy duty battery clips.
Features Include: Impact resistant strainer protects against debris and jamming Integrated on/off switch in supplied 25 ft. cabling, providing operational convenience away from the power source Harsh environmental DC motor technology, proven in over 15 million operational units Direct operation from a 12 volt vehicle battery, providing flexibility in location and use Extended dry run time capability, preventing pump damage due to inconsistent water flow Thermal overload protection for each motor in the event of a debris jam Port Size Inlet/Outlet: 3" Amp Draw: 30 amps (approx.) Protection: Thermal Cut Off (TCO) for each motor Dimensions: (13.5"L x 12"W x 8.5"H) Weight: 1.1 Ib.
The RainPerfect pump has many convenient features: Provides pressurized pumping through a garden hose (13 PSI) Runs on a solar rechargeable (NiMH) battery for operation anytime, day or night Connects to all standard garden hoses Easy operation and installation Adaptable to most style rain barrels Pumps up to 100 gallons (378 liters) of water on a single charge Maximum Pressure: 13 psi Dimensions:12.625L x 6.25"W x 21"H RainPerfect Pump System Includes: Control Box with NiMH Rechargeable Battery Intake Hose ORDER NO. Mfr. No. Submersible Pump 777-500102 AQ500-102 Solar Panel and Ground Stake
727
MISCELLANEOUS PUMPS
12560-0001
SEAL Liptype
*GPM flow at 10 feet head. **L/min. at 3m head. ***To order oil resistant impellers separately, use above impeller numbers with 0003 suffix instead of 0001 as listed.
GPM* VOLTAGE MOTOR L/min** VAC HP DUTY CYCLE 5.8 (22) 115 1/6 Continuous 3.4 (12,8) 115 1/12 Intermittent 3.4 (12,8) 115 1/12 Intermittent
PORTS INT. EXT. IMPELLER*** 5/8"O.D. Hose 07273-0001-P (N) 3/8" IPT 3/4" GHT 14750-0001 (N) 3/8" IPT 3/4" GHT 14750-0003-P (OR)
DIMENSIONS Ins. (mm) HEIGHT WIDTH LENGTH 7-3/4"(169) 5-3/4"(147) 9-5/16"(237) 3-1/2"(89) 5(127) 6-7/8"(174)
*GPM flow at 10 feet head. **L/min. at 3m head. ***To order oil resistant impellers separately, use above impeller numbers with 0003 suffix instead of 0001 as listed.
CLUTCH PUMPS
AUTOMATICALLY CONTROLLED CLUTCH PUMPS
With an electro-magnetic clutch you will have pumping power whenever needed, at a push of a button, without being at the pump. Combined with a vacuum switch (recommended for bilge pump application), the clutch will automatically disengage whenever the pump starts priming air, thereby preventing dry running and pump damage.
Impeller/Service Kit 671-00005 / 671-10017 671-00017 / 671-10016 671-00017 / 671-10016 671-00017 / 671-10016
F4B-11
ORDER NO. 102-469003 Replacement Impeller: 671-00023
Pump Body Bronze Impeller 671-00023 Seal Lip Seal Connection Hose 1" / 1/2"NPT
F4B-11
728
The 12210-Series pumps are the most compact of the AC motor pump units. They are capable of delivering up to 3-1/2 GPM. The motor has replaceable brushes for extended life. However, they are not rated for continuous duty operation. The 11810-Series pumps are mid-range models which deliver about 9.5 GPM respectively. They have a replaceable wearplate to extend serviceability when handling abrasive fluids. 12210-Series The 06050-0003 pump is the largest of the motor pump units. With a capacity of 26 GPM, it is ideal for the larger de-watering or washdown applications. The motor can be wired for either 115 volt or 230 volt operation.
GPM* Motor Voltage 115/230 115 115 115 HP 3/4 1/3 1/12 1/12 Duty Cycle Continuous Continuous Intermittent Intermittent Int. 1 NPT 1/2 NPT 3/8 NPT 3/8 NPT Ext. GHT GHT GHT Impeller 06056-0003 05929-0003 01414-0001-P 01414-0003-P
6050-Series
Dimensions in (mm) Height Width Length(mm) 8-5/8" (186) 3-5/8" (92) 3-5/8" (92) 8" (203) 4" (127) 4" (127) 13" (229) 6-7/8" (102) 6-7/8" (102) 7-3/4" (197) 7-1/4" (184) 10-1/2" (267)
*GPM flow at 10 feet head. ** L/min. at 3m head WARNING: PUMPS WITH AC MOTORS CAN SPARK. EXPLOSION AND DEATH CAN OCCUR. DO NOT USE WHERE FLAMMABLE VAPORS ARE PRESENT.
29 gpm (110 lpm) maximum flow Low & High pressre versions available Robust stainless steel body and anti-clogging
design Impeller Only one tool needed for all servicing ISO 8846 MARINE & USCG Regulations for Ignition Protection ISO 8849 MARINE Bilge Pump Standard
LOW PRESSURE
12 Volt DC, 3/4" NPT ports, fuse size 10 amp. 6" (15cm) long x 6-1/2" (16 cm) wide x 5" (12cm) high 15 lb (6.8 kg) Mfr. No. 50840-0012
ORDER NO. 50840-0012
729
Replacement Impeller
11810 DC PUMP
Ideal for Bilge Pumping, Bait Tank, Wash Downs, and General Marine Service. Flow rate: 11 US gallons/min (42 LPM) Self-priming from dry up to 10ft. Features: Small bilge debris present no problem to these bronze bodied, flexible impeller pumps. Simple design means fewer wearing parts. Meets USCG Electrical Standards (Title 33, Chapter 1, Part 183 Subpart 1) for ignition protection Ports: 1/2" Internal Pipe Thread and 3/4" Garden Hose External Thread Size: 5-5/16"H x 11-11/16"L x 4-1/2"W
ORDER NO. 11810-0121
730
Pump
02760-0001*
Impeller
04528-0001-P
3.7 GPM (14 LPM); 1/4" NPT port connections; 3/8" (9.7mm) dia. shaft; full cam and lip seal.
Pump
02620-1101*
Impeller
18673-0001-P
Pump
01673-1001*
Impeller
01210-0001-P
5.8 GPM (22 LPM); 3/8" NPT port connections; 1/2" (12,7mm) dia. shaft; full cam and lip seal.
11.3 GPM (42,8 LPM); 1/2" NPT port connections; 5/8" (16 mm) dia. shaft; full cam and lip seal.
CRUSADER - TYPE
The Jabsco Crusader type pump is a direct replacement for the stock Crusader (Thermo Electron) pump no. 97179 and (Sherwood No. E-35) sold through Crusader dealers. It fits most pre-1993 Crusader engine models, accepts the Crusader drive pulley and bolts directly to the stock mounting bracket. It has a replaceable wearplate and the seal can generally be replaced without even removing the pump shaft. The impeller will fit either the stock Crusader pump or the upgraded Jabsco model.
ORDER NO. 42730-0000
Pump
00777-9001*
Impeller
17937-0001-P
Pump
06400-0004
Impeller
17935-0001-P
23 GPM (87 LPM); 1" NPT(F) port connections; 5/8" (16 mm) dia. shaft; mechanical face seal. Brass cam and impeller insert.
62 GPM (235 LPM); 1-1/4" NPT port connections; 1" (25,4mm) dia. shaft; face seal. Brass cam and impeller insert.
*These models may be ordered equipped with nitrile impellers by inserting a 3 in the last digit of the model number in place of the 1.
MERCRUISER - TYPE
The Jabsco Mercruiser type replacement pump has a one piece bronze body and bronze end-plate and cast iron composite pump (Quicksilver model No. 46-72774-A32) supplied as original equipment. It has a replaceable cam and wearplate so it can be totally overhauled. The long-life Jabsco impeller fits both the stock MerCruiser pump and Jabsco aftermarket pump and is supplied with the gaskets needed to complete the impeller replacement.
ORDER NO. 43210-0001
731
CC
For more information see: www.xylemflowcontrol.com
732
IMPELLERS shown are actual size See Pages 736-739 for Conversion
733
IMPELLERS shown are actual size See Pages 736-739 for Conversion
R X
W U
734
IMPELLER NO.
00653-0001-P 00673-0001-P 00836-0001-P 00836-0003-P 00836-0008-P 00920-0001-P 00920-0003-P 00920-0008B 01210-0001-P 01210-0003-P 01414-0001-P 01414-0003-P 02999-0001B 03085-0001-P 04527-0003B 04528-0001-P 04528-0003-P 04568-0001-P 04568-0003-P 04598-0001-P 04598-0003-P 05616-0001-P 05929-0001-P 05929-0003-P
SILHOUETTE G G O M M M K A L K A O O
IMPELLER NO.
06056-0003-P 06303-0001-P 06303-0003-P 06303-0007-P 06760-0001B 06760-0003-P 07273-0001-P 07273-0003-P 09200-0003B 09200-0011B 09200-0021B 09200-0023-P 11979-0001-P 12104-0001B 13554-0001-P 14281-0001-P 14609-0001B 14609-0003 14750-0001B 14750-0003-P 14787-0001B 17018-0001-P 17240-0001B 17255-0003-P
SILHOUETTE M H H H
IMPELLER NO.
17370-0001-P 17935-0001-P 17936-0001-P 17937-0001-P 17937-0003-P 17938-0001-P 17954-0001-P 17956-0001--P 18327-0001-P 18653-0001-P 18673-0001-P 18673-0003-P 18777-0001-P 18786-0001B 18789-0001 18838-0001-P 18948-0001-P 18958-0001-P 21414-0001-P 22120-Series 22405-0001-P 22799-0001-P 30919-0001 31130-0061-P
SILHOUETTE Q Q Q Q Y Y Y I I I Y Y
O O G G F F F F
G D D K K
M A K K B B
HH W X A K Z R R
C C C R D
M M G K K
GG D
CC
1 2 3 4 5 6 7 8
For more information see: www.xylemflowcontrol.com
SLOTTED SHAFT PIN DRIVE THROUGH HOLE PIN DRIVE KEY DRIVE
SINGLE FLAT DRIVE DOUBLE FLAT DRIVE DING DRIVE KEYWAY SPLINE DRIVE RIBBED SEGMENT KEY
735
Impeller Type
A
Material
Neoprene Neoprene Nitrile
ORDER NO.
01414-0001-P 01414-0003-P 12104-0001B 21414-0001-P
Drive Type
4 4 2 4 4 4 4 4 4 1 or 2 1 or 2 1 4 4 4 4 1 or 2 2 6 4 4 3 3 4 4 4 7 1 or 2 1 or 2 1 1 7
Number of Blades
6 6 6 6 8 8 6 6 10 6 6 6 10 10 10 10 6 6 6 6 6 6 12 6 6 10 10 10 10 6 6 6 6
Inches
1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4
Diameter
Dimensions
mm
32 32 32
Inches
15/32 15/32 15/32 15/32 15/32 15/32 15/32 15/32 2-11/16 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 7/8 7/8 7/8 7/8 7/8 7/8 2-57/64 7/8 7/8 7/8 7/8 7/8 7/8 2 7/8 15/32
Width
mm
12 12 12
Shaft Diameter
Inches
5/16 5/16 5/16 5/16 5/16 5/16 5/16 5/16 5/16 5/8 3/8 3/8 15/32 5/16 5/16 5/16 15/32 1/2 5/16 1/4
mm
8 8 8 8 8 8 8 8 16 8
Insert Material
Brass* Brass* Brass Brass Brass* Brass* Brass* Plastic* Brass Brass Brass Brass*
Neoprene Neoprene Neoprene Neoprene Neoprene Neoprene Neoprene Nitrile Nitrile Nitrile
B C CC D
32
12 12 12 12 12 12 68 19 19 19 19 19 19 19 19 22 22 22 22 22 22 73.4 22 22 22 51 22 22 22 22
14750-0001B 14750-0003-P 14609-0001B 14609-0003 14787-0001B 31130-0061-P 04528-0001-P 04528-0003-P 17255-0003-P 22405-0001-P 09200-0011B
2-19/32 1-9/16 1-9/16 1-9/16 1-9/16 1-19/32 1-19/32 1-19/32 2 2 2 2 2 2 3-1/4 2 2 2-1/4 2 2 2 2 2 1-9/16
Brass#
(673-Series Impellers may be replaced with the newer 18673-Series - See Impeller Type I) Neoprene Neoprene Neoprene Neoprene Neoprene Urethane Nitrile Nitrile
12.7 8 8 8
12.7
Brass
GG H HH I
736
Type
Drive Type
7 7 3 3 6 6 7 5 7 7 7 7 7 3 6 7 7 7 7 7 7 7 5 7 7 7 7 5 7 7 3 7 7 4 6 3 5
Number of Blades
12 12 12 12 12 12 12 12 12 10 8 8 8 8 8 8 8 8 9 9 9 9 12 12 12 12 9 9 13 12 10 10 10 10 10 12 9 9
Inches
2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4
Diameter
Dimensions
Inches
1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-29/32 1-1/4 2 1-1/4
mm
57 57 57 57 57 57 57 57 57 57
Width
mm
Shaft Diameter
Inches
5/8 5/8 5/8 5/8 1/2 1/2 5/8 5/8 5/8 1/2 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 1 1 1 1 1 1 1 1 1 1 1 1-1/2 1
mm
16 16 16 16
Insert Material
Brass Brass Brass Brass Brass Brass Plastic Brass Brass Brass
12.7 12.7 16 16 16 12.7 16 16 16 16 16 16 16 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 38 16 16 16 19 16 16 20 16
(22120-Series Impellers may be replaced with the newer 18777-Series - See Impeller Type HH)
2-9/16 2-9/16 2-9/16 2-9/16 2-9/16 2-9/16 2-9/16 2-9/16 3-3/4 3-3/4 3-3/4 3-3/4 3-3/4 3-3/4 3-3/4 3-3/4 3-3/4 4-5/8 4-5/8 4-5/8 5
1-1/4 2 2 2 2 2 2 3
31.5 51 51 51 51 51 51
Brass BrassM Brass** Brass** Brass Brass Brass BrassM Brass Brass Brass Brass Brass Plastic Brass Brass Brass Brass Brass Brass
Nitrile
Nitrile
Neoprene Neoprene Neoprene Natural Rubber Neoprene Neoprene Neoprene Neoprene Neoprene Neoprene Neoprene Neoprene Neoprene Neoprene Neoprene Neoprene Neoprene Neoprene Neoprene Nitrile Nitrile Nitrile
1-7/16 2-1/2 2-1/2 2-1/2 3-1/2 3-1/2 3-1/2 2-1/2 3-1/2 3-3/4 3-1/2 3-1/2 3-1/2 4
36.5 76.2 63 63 88.9 88.9 88.9 88.9 88.9 88.9 101.6 88.9 95 63 63
Plastic
R U X
Neoprene
12
2-7/16
2-9/16 2-9/16 2-9/16 2-9/16 2-9/16 2-9/16 3-1/16
62
65 65 65 65 65 65 77
1-1/4
1-5/8 2 2 2 2 2 3
31.5
41.4 51 51 51 51 76.2 51
5/8
5/8 5/8 5/8 5/8 5/8 5/8
16
Brass
Brass Brass Brass Brass Brass
Brass# Brass
18327-0001-P
13/16
737
Inches
1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-9/16 1-1/4
mm
32 32 32
32
Drive Type
4 4 2 4 4 4
Inches
15/32 15/32 15/32 15/32 15/32 15/32 15/32 3/4 3/4 3/4 3/4 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 15/32 15/32 2 2 2 2 2 1-7/16 2-1/2 2-1/2 3-1/12 3-1/12 3-1/12 3-1/12 3-1/12 2-1/2 3 2 7/8
Diameter
mm
12 12 12 12 12 12 12 19 19 19 19 22 22 22 22 22 22 22 22 22 12 51 51 51 51 51 36.5 76.2 63 63 88.9 88.9 88.9 88.9 88.9 63 51
Shaft Dimensions
Inches
5/16 5/16 5/16 5/16 5/16 5/16 5/16 3/8 3/8
15/32
Width
mm
8 8 8 8 8 8 9.5 9.5 6.4 12 12 8 8 8 8 8 8 8
Material
Neoprene Neoprene Neoprene Nitrile
Insert Material
Brass* Brass* Brass Brass
Impeller ORDER NO. 01414-0001-P 01414-0003-P 12104-0001B 21414-0001-P 14609-0001B 14609-0003 14787-0001B 04528-0001-P 04528-0003-P 17255-0003-P 22405-0001-P 00653-0001-P 00673-0001-P 04527-0003B 05616-0001-P 07273-0001-P 07273-0003-P 22799-0001-P 06303-0001-P 06303-0003-P 14750-0001B 14750-0003-P 00920-0001-P 00920-0003-P 00920-0008B 04598-0001-P 04598-0003-P 06056-0003-P 11979-0001-P 17018-0001-P 00836-0001-P 00836-0003-P 00836-0008-P 06760-0001B 06760-0003-P 17240-0001B 18786-0001B 18789-0001 Type
A A A A
32 32 40 40 40 40 51 51 51 51 51 51 51
51 51 32 32
4
1 or 2 1 or 2 1 1 or 2 2 6 4 4 3 4 6 4 4 7 7 7 3 3 6 7 7 7 7 7 7 7 7 5 7 1 -
Brass* Plastic* Brass Brass Brass Brass Brass Brass None Brass*
C
C C D D D G G G G G G G H H D
1-9/16 1-9/16
1-9/16
1/4
2 2 2 2 2 2 2
2 2
Neoprene Neoprene Neoprene Neoprene Neoprene Neoprene Neoprene Neoprene Neoprene Natural Rubber Neoprene Nitrile Nitrile Nitrile Nitrile Nitrile Nitrile Nitrile
None
12.7 12.7
Plastic Plastic Plastic Brass* Brass* Brass Brass Brass Plastic Brass
12.7
12
5/16
5/16 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 1 1 1 1 1 1 1 1
5/16
8
16 16 16 16 16 16 16 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 16
B
B
2-9/16 2-9/16 2-9/16 2-9/16 2-9/16 2-9/16 2-9/16 3-3/4 3-3/4 3-3/4 3-3/4 3-3/4 4-5/8 4-5/8 4-5/8
65 65 65 65 65 65 65 65
95 95 95 95 118 118 118 95
M M M M M M M M O O O O O R R R
BrassM Brass** Brass** Brass Brass Brass BrassM Brass Brass Plastic Brass Brass Brass
Neoprene Neoprene Neoprene Natural Rubber Neoprene Neoprene Neoprene Neoprene Nitrile Nitrile
* Insert material was different Impeller molded on shaft MFor low temperature to 27F (120F (max))
# Mercruiser replacement
738
Number of Blades
Inches
mm
Drive Type
7 4 4 4 7 1 7 7 7 4 6 3 3 7 7 3 3 6 6 7 5 7 5 7 7 7 3 3 5 7
2-11/16 3/4 3/4 3/4 3/4 7/8 2 7/8 1-1/4 2 2 2 2 2-57/64 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-29/32 1-1/4 2 3-9/16 2-9/16 3-9/16 3-3/4 1-1/4 1-5/8 3 4 1-1/4 2 7/8
Inches
Diameter
mm
68 19 19 19 19 51 22 22 31.5 51 51 51 51 73.4 31.5 31.5 31.5 31.5 31.5 31.5 48.4 31.5 88.9 88.9 31.5 41.4 101.6 76.2 95 63 51 51 22
Shaft Dimensions
Inches
5/16 5/16 5/16 5/16 5/32 1/2 1/2 1/2
5/8
5/8
mm
16
Material
Neoprene Neoprene Neoprene Neoprene Neoprene Neoprene Nitrile Nitrile Neoprene Neoprene Neoprene Neoprene Neoprene Neoprene Neoprene Neoprene Neoprene Neoprene Neoprene Neoprene Neoprene Neoprene Neoprene Neoprene Neoprene Neoprene Neoprene Neoprene Nitrile Nitrile Nitrile Nitrile Nitrile
Insert Material
Brass# Plastic* Plastic* Brass Brass Brass Brass Brass Brass Brass Brass Brass# Brass Brass Brass Brass Brass Brass Brass Brass Plastic Plastic Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass
Impeller Type
CC F F HH I I Y Y Y Y GG K K K K K K K Q Q Q W X Z U Q K Y L I F
ORDER NO. 31130-0061-P 09200-0011B 09200-0003B 09200-0021B 09200-0023-P 18777-0001-P 18653-0001-P 18673-0001-P 18673-0003-P 03085-0001-P 17937-0001-P 17937-0003-P 17954-0001-P 17956-0001-P 18327-0001-P 18958-0001-P 01210-0001-P 01210-0003-P 04568-0001-P 04568-0003-P 05929-0001-P 05929-0003-P 13554-0001-P 14281-0001-P 22120-Series 17370-0001-P 17935-0001-P 17936-0001-P 17938-0001-P 18838-0001-P 18948-0001-P 30919-0001 02999-0001B
4
1 or 2 1 or 2
10
5/8
5/8 3/4 5/8 25/32 5/8 5/8 5/8 5/8 1/2 5/8 5/8 5/8 5/8 1 1 1 5/8 13/16 1-1/2 5/8 1 5/8
3-1/4 2-1/4
2-1/4 2-1/4 2-1/4 2-1/4 2-1/4
65
12
57 57 57 95 95 95 95 62
65 77 127
2-7/16 2-9/16
13
3-1/16 5
Description Suitable for impellers up to 65mm (2-1/2") diameter Compact Version - Suitable for impellers up to 2-1/4" diameter Suitable for impellers from 65mm (2-1/2") to 118mm (4-1/2") diameter
739
CRUSADER 20300 1003026 JOHNSON 09-1026B-9 09-1027B 09-1027B-9-00 09-1028B-9 09-1028BT-1 09-1029B 09-1029B-9 09-801B 09-802B 09-806B-1 09-808B-1 09-810B-1 09-812B-1 09-814B 09-819B-00 09-819B-9 09-824P-1 09-824P-9
ORDER NO.
ONAN
ORDER NO. 18838-0001-P 01210-0001-P 04528-0001-P 18838-0001-P 17935-0001-P ORDER NO. 17937-0001-P 17936-0001-P 01210-0001-P 17935-0001-P 17937-0001-P 18838-0001-P 03085-0001-P 18673-0001-P 04528-0001-P 18838-0001-P 18948-0001-P
VOLVO 801277 801277 803729 804696 807904 825941 825941 825942 831182 833995 834794 842857 844683 845796 860203 875660 875697 897055 3856039-7 835512-5 835874-9 875575-3 875583-7 875736-1 875807-0 875808-8 875811-2 875814-6 876120-7 876554-7 877061-2 877061-2
ORDER NO. 00920-0001-P 17937-0001-P 04528-0001-P 18673-0001-P 17935-0001-P 00920-0001-P 17937-0001-P 17935-0001-P 04568-0001-P 22405-0001-P 22120-0001-P 17936-0001-P 17936-0001-P 17936-0001-P 01210-0001-P 17935-0001-P 17936-0001-P 18673-0001-P 01210-0001-P 18838-0001-P 18948-0001-P 04568-0001-P 22405-0001-P 17935-0001-P 04528-0001-P 18673-0001-P 01210-0001-P 17936-0001-P 22120-0001-P 04528-0001-P 00920-0001-P 17937-0001-P
YAMAHA
ORDER NO.
YSC-101-03-01-0C 18838-0001-P 6TA-12457-00 18948-0001-P YANMAR 104211-42070 124223-42091 124310-46090 127610-42200 128170-42070 129470-42530
ORDER NO. 04528-0001-P 22799-0001-P 04568-0001-P 17937-0001-P 21414-0001--P 01210-0001-P
PERKINS 0460024 0460027 0460038 7054 24880031 24880178 24880190 24880194 24990272 NA900010 NA900012
9959 9979 10615 MERCRUISER ORDER NO. 15000 47-59362* 17954-0001-P 18200 47-831311350 31130-0061-P OBERDORFER ORDER NO. 6603 6617 7441 8922 132-0317 J050035
04598-0001-P 06303-0001-P 17937-0001-P 18948-0001-P 18838-0001-P 17935-0001-P
740
FLEXIBLE IMPELLERS
IMPELLERS
The impeller is the heart of the flexible impeller pump design. Specially formulated rubber compounds have been developed to ensure long impeller life as each blade is bending 1750 times a minute or more. Johnson Pump molds all impellers in their own molding facility to maintain high quality standards. Thats why so many engine manufacturers choose Johnson as standard OEM equipment. While Johnson has impellers available to fit its OEM pumps, many Johnson impellers interchange with Jabsco impellers.
09-1027B-9-00
Always use Johnson Pump impellers Nitrile, oil resistant, diesel and oil only, not gasoline or any light petrochemicals/fuels due to combustion Gasoline is never pumped with ANY of our pumps Neoprene, for cooling. Do not use with Diesel or oil due to swelling issues MC97, for ultra ballast this helps with flexing and reverse.....all around good impeller for cooling purposes, water applications
Always sell an impeller with a new pump. Its like a spare tire.
IMPELLERS
741
FLEXIBLE IMPELLERS
- Impellers - Impellers shown shown are actual are actual size. See size. Page See Page 745 525 for for Conversion Conversion IDENTIFICATION IDENTIFICATION GUIDE GUIDE IMPELLER IMPELLER TAKE GOOD CARE OF THE COOLING SYSTEM CHANGE TO A NEW IMPELLER EVERY YEAR The impeller is a very important security device. Its task is to pump the water through the cooling system of the engine. But remember that the impeller should be replaced every year. And always make sure you get a Johnson Pump original impeller. Then youll know that it matches your pump exactly. THIS IS HOW TO REMOVE THE OLD IMPELLER Remove the impeller with a slip joint plier.
THIS IS HOW TO FIT THE NEW IMPELLER Lubricate the shaft and the inside of the pump body and end cover. Use soap, grease or oil. By doing so you avoid dry friction when you start the engine. Mount the impeller by making a pushing and twisting movement in the rotating direction.
Change to a new impeller every year. Its just as important as changing oil and fuel filter. The impellers are illustrated in full scale which means that you can identify your impeller without knowing the part number.
F5
IMPELLER: 09-1027B-1
ORDER NO. 671-00003
IMPELLER: 09-1027B-9-00
ORDER NO. 671-00010
F5
IMPELLER: 09-1027B-10
ORDER NO. 671-00029
IMPELLER: 09-804B-9
ORDER NO. 671-00015
F4
F5
3 4
IMPELLER: 09-1026B-1
ORDER NO. 671-00002
IMPELLER: 09-801B
ORDER NO. 671-00006
IMPELLER: 09-1026B-9
ORDER NO. 671-00009
742
FLEXIBLE IMPELLERS
IMPELLER IDENTIFICATION GUIDE
Impellers shown are actual size. See Page 745 for Conversion
TA3P10
6
IMPELLER: 09-1052S-9
ORDER NO. 671-00007
F2
IMPELLER: 09-1077B-9
ORDER NO. 671-00008
9
IMPELLER: 09-806B-1
ORDER NO. 671-00012
F35
IMPELLER: 09-808B-1
ORDER NO. 671-00001
F4
IMPELLER: 09-824P-9
ORDER NO. 671-00022
IMPELLER: 09-824P-9-1
ORDER NO. 671-00023
F35
10
11
F7
IMPELLER: 09-1028BT-1
ORDER NO. 671-00005
F6
IMPELLER: 09-812B-1
ORDER NO. 671-00004
IMPELLER: 09-1028B-9
ORDER NO. 671-00011
12
F9
IMPELLER: 09-802B (F9)
ORDER NO. 671-00019
743
FLEXIBLE IMPELLERS
IMPELLER IDENTIFICATION GUIDE - Impellers shown are actual size. See Page 745 for Conversion
IMPELLER: 09-819B-00
ORDER NO. 671-00017
IMPELLER: 09-810B-1
ORDER NO. 671-00013
IMPELLER: 09-819B-9
ORDER NO. 671-00018
IMPELLER: 09-810B-9
ORDER NO. 671-00014
13
F8
F4
14
15
F75
IMPELLER: 09-821BT-1
ORDER NO. 671-00016
16
F95
F9
IMPELLER: 09-820B
ORDER NO. 671-00021
17
IMPELLER: 09-814B
744
FLEXIBLE IMPELLERS
IMPELLER REPLACEMENT - SELECTION TABLE BY DIMENSIONS
Ref. Pump No. 5 F2 6 7 8 14 14 3 3 9 9 1 4 2 2 2 10 11 TA3P10 F35
ORDER NO. 671-00008 671-00007 671-00012 671-00001 671-00013 671-00014 671-00002 671-00009 671-00022 671-00023 671-00015 671-00006 671-00003 671-00010 671-00029 671-00004 671-00005 671-00011 671-00016 671-00017 671-00018 671-00019 671-00020 671-00021
MFR.# 09-1077B-9 09-1052S-9 09-806B-1 09-808B-1 09-810B-1 09-810B-9 09-1026B-1 09-1026B-9 09-824P-9 09-824P-1 09-804B-9 09-801B 09-1027B-1 09-1027B-9-00 09-1027B-10 09-812B-1 09-1028BT-1 09-1028B-9 09-821BT-1 09-819B-00 09-819B-9 09-802B 09-814B 09-820B
MATERIAL NITRILE NITRILE MC97 MC97 MC97 NITRILE MC97 NITRILE NITRILE MC97 NITRILE NEOPRENE NEOPRENE NITRILE MC97 MC97 MC97 NITRILE MC97 NEOPRENE NITRILE NEOPRENE NEOPRENE NEOPRENE
IMPELLER DIAMETER 1.29" (35.2mm) 1.78" (45.2mm) 1.58"(40mm) 1.58"(40mm) 2"(50.8mm) 2"(50.8mm) 2"(50.8mm) 2"(50.8mm) 2"(50.8mm) 2"(50.8mm) 2.25"(57.1mm) 2.25"(57.1mm) 2.25"(57.1mm) 2.25"(57.1mm) 2.25"(57.1mm) 2.25"(57.1mm) 2.56"(65mm) 2.56"(65mm) 2.56"(65mm) 3.74"(95mm) 3.74"(95mm) 3.74"(95mm) 3.74"(95mm) 3.74"(95mm)
IMPELLER DEPTH .50" (12.7mm) .50" (12.8mm) .75"(19mm) .75"(19mm) .87"(22mm) .87"(22mm) .87"(22mm) .87"(22mm) .87"(22mm) .87"(22mm) 1.24"(31.5mm) 1.24"(31.5mm) 1.24"(31.5mm) 1.24"(31.5mm) 1.24"(31.5mm) 1.90"(48.2mm) 1.98"(50.2mm) 1.98"(50.2mm) 3.15"(80mm) 2.48"(63mm) 2.48"(63mm) 3.48"(88.5mm) 3.48"(88.5mm) 5.12"(130mm)
INNER NO. OF BLADES DIAMETER .31" (8mm)/Flat 6 .31" (8mm)/Flat .37"(9.5mm) .47"(12mm) .472"(12mm) .472"(12mm) .50"(12.7mm) .50"(12.7mm) .31" (8mm)/Flat .31" (8mm)/Flat .79"(20mm) .63"(15.9mm)/Key Splines Splines Splines Splines Splines Splines Splines Splines Splines Splines Splines Splines 6 6 6 6 6 6 6 6 6 12 12 12 12 12 12 8 8 12 11 11 9 12 12
F4
F5
F6 F7
15 13
F75 F8
12 17 16
F9
F95
IN FULL SCALE WHICH MEANS THAT YOU CAN IDENTIFY YOUR IMPELLER WITHOUT KNOWING THE PART NUMBER.
F4B 3&4 Cyl. BUKH/Dolphin Marine/ISUZU/Volvo F5B Fiat/Barnes Brinkcraft/BMW/Leyland/ BUKH/C-Power/Dolphin Marine/Mercedes/ FNM/Ford/Marine Power/Kubota/Nanni/ Pathfinder/Perkins/SAAB/Lehman/Mitsubishi/ VM/Volvo 09-1028B F7B Fiat/Bayliner/BMW/Ford/C-Power/DAF/ Mercedes/Mitsubishi/SAAB/SABRE/Peugeot/ Sole Diesel/Leyland/Valmet Oy/VW/Volvo 09-1029B F8B DAF/Mitsubishi/SAAB/Mercedes/ Valmet Oy/VM/Volvo 09-1052S-9 F3B-1907 DC Motor-Self-Priming Pumps 09-1064-9 F3P-10 Mini Pump 09-1077B-9 F2P-10 DC Motor-Self-Priming Pumps
745
D E
IMPELLER REPLACEMENT KITS
Ref. A B C D E
ORDER NO. 671-00024 671-00025 671-00026 671-00027 671-00028 JOHNSON PUMP Impeller No. 09-701B-1 09-702B-1 09-703B-1 09-704BT-1 09-705BT-1 Material Neoprene Neoprene Neoprene Neoprene Neoprene Sherwood No. 9959K 10615K 47-59362T 17000K 18000K Mercruiser No. Jabsco No. 18838-0001-P 18948-0001-P 17954-0001-P 18958-0001-P
IMPELLERS
Always use Johnson Pump impellers Nitrile, oil resistant, diesel and oil only, not gasoline or any light petrochemicals/fuels due to combustion Gasoline is never pumped with ANY of our pumps Neoprene, for cooling. Do not use with Diesel or oil due to swelling issues MC97, for ultra ballast this helps with flexing and reverse.....all around good impeller for cooling purposes, water applications
746
FLANGE PUMPS
ENGINE COOLING PUMP
Model No. F5B-9 Flange mounted bronze pump. OEM replacement, see chart below.
Volvo Penta *
ORDER NO. 103-26212 * 103-26213 **
Type AQ131A/B/C/D, AQ140A, AQ145, AQ145A/B, AQ151A/B/C, AQ165A, AQ170B/C, AQ250A, AQ251A BB21 Description F5B-9 Pump / Full Cam F5B-902 Pump / Reduced Cam
Type MD1, MD2, MD2B, MD2BHY, MD1KHD/HY, MD1B, MD1/11, MD5A, MD1A, MD10A, MD5B/C, MD6A/B, MD7A/B Description F35B-9 Pump
+ + +
REPLACEMENT PARTS 09-45913 Service Kit 09-801B Impeller 0.2233.001 Lip Seal 01-45930 Gasket 01-45023 Bushing 01-45022 Shaft 0.0141.901 End Cover Screw
REPLACEMENT PARTS 09-45589 Service Kit 09-808B-1 Impeller 0.2233.010 Lip Seal 01-43240 Gasket 0.3431.441 Bearing 01-45556 Shaft
+ Items contained in Seal Kit. * Full Cam / ** Reduced Cam - 40-50 lower capacity
REPLACEMENT PARTS ONLY FOR F35B-8 - 3/8'' HEAVY DUTY IMPELLER PUMP
REPLACEMENT PARTS - For 10-35038-5 & 10-35038-5E
ORDER NO. 671-00001 + 671-20001 + 671-30001 +
671-10001
Mfr. No. 09-808B 0.2233.010 01-43240 09-45589 0.3431.748 01-45069 01-46416 0.0141.500
Description Impeller Lip Seal Gasket Service Kit Bearing Shaft ** Shaft* End Cover Screw
+ Service Kit contains neoprene impeller, seal, gasket, end cover screws. * Shaft for # 10-35038-41 / **Shaft for # 10-35038-5 & # 10-35038-5E
747
FLANGE PUMPS
ENGINE COOLING PUMP MODEL # F7B-9
Flange mounted bronze pump. OEM replacement, see chart below.
TYPE MD31, TMD31, TAMD31A/B, TMD41, TAMD41A/B, TMD40A/B, MD40A, AD31A/B, AD41A/B, AQAD 30A, AQD40A, AQD41A, D41A/B, MD31
York Power
ORDER NO. 102-42281
+ Service Kit contains neoprene impeller, seal, gasket, end cover screws.
+ + +
Service Kit Impeller Lip Seal Gasket Bearing Carrier End Cover Screw
+ + +
REPLACEMENT PARTS 09-45592 Service Kit 09-1028BT-1 Impeller 0.2233.001 Lip Seal 01-42445 Gasket 0.3431.483 Bearing 01-45844 Shaft 0.0141.502 End Cover Screw
ENG. MFR. Alaska Diesel Flagship Hardin Indmar Marine Power Panther Marine
ORDER NO. 102-480501
TYPE Lugger/Deere GM 454 GM V8 Ford & GM 8 GM 454 & Ford 351 GM 454 Mfr. No. 10-24805-01 REPLACEMENT PARTS Description F6B-9 Pump
ORDER NO. 103-50982
TYPE MD17C/D, AQ115/A, AQ130 A/B/C/D, MD3B, AQ110/115, AQ120/B, AQ125A/B, AQ140, AQ60F, AQ95/A, BB100, BB115B/C, BB30, MB16A, MB18-MB18F, MB20A/B/C, MD20B Mfr. No. 10-35098-2 REPLACEMENT PARTS 09-45905 09-1026B-1 0.2233.010 01-45284 0.3431.441 01-45235 Description F4B-9 Pump
Service Kit Impeller Lip Seal Gasket Bearing End Cover Screw
748
CC PART NO. 651-00035 651-01006 651-00021 651-00030-2 651-00045-1 651-00007 651-00907 651-09901 651-09903 651-00075 651-00360 651-00105 651-00030-1 651-00991 651-02075 651-04257 651-04258 651-04259 651-04303 651-04304 651-04306 651-04432 651-06333 651-08000 651-08490 651-09000 651-09919 651-09959 651-10072 651-10077 651-10093 651-10103 651-10195 651-10197 651-10285 651-10286 651-10514 651-10515 651-10545 651-10615 651-10927 651-10929 651-10931 651-10944
E35 G1006 G21 G30-2B G45-1 G7B G907P G9901 G9903 K75B N10360GX P105 R30G-1 R991 02075 04257 04258 04259 04303 04304 04306 04432 06333 08000K 08490 09000K 09919 09959K 10072 10077K 10093 10103 10195 10197 10285 10286 10514C 10515C 10545 10615K 10927 10929 10931 10944
CC PART NO. 651-10996 651-10997 651-10999 651-11068 651-11360 651-11367 651-11389 651-11744 651-11803 651-11805 651-11807 651-11810 651-11854 651-12231 651-12444 651-12665 651-12855 651-12856 651-12859 651-14159 651-14161 651-14214 651-14238 651-14239 651-14240 651-14379 651-14380 651-15000 651-15055 651-15883 651-15935 651-15942 651-15945 651-15951 651-15952 651-15955 651-16126 651-17000 651-18000 651-18001 651-18005 651-18016 651-18029 651-18271
10996 10997 10999 11068 11360 11367 11389 11744 11803 11805 11807 11810 11854 12231 12444 12665 12855 12856 12859 14159 14161 14214 14238 14239 14240 14379 14380 15000K 15055 15883 15935 15942 15945 15951 15952 15955 16126 17000K 18000K 18001 18005 18016 18029 18271
CC PART NO. 651-18441 651-18570 651-18576 651-18652 651-18576 651-18652 651-18663 651-18742 651-18806 651-19620 651-19667 651-19674 651-19714 651-19869 651-21208 651-21209 651-21570 651-21776 651-21930 651-22117 651-22767 651-22768 651-22770 651-23448 651-23459 651-23799 651-23972 651-23973 651-23976 651-23977 651-23979 651-23980 651-24025 651-24176 651-24470 651-26000K 651-27000K 651-29000K 651-30000K
18441 18570 18576 18652 18576 18652 18663 18742 18806 19620 19667 19674 19714 19869 21208 21209 21570 21776 21930 22117 22767 22768 22770 23448 23459 23799 23972 23973 23976 23977 23979 23980 24025 24176 24470 26000K 27000K 29000K 30000K
749
SHERWOOD IMPELLERS
GENUINE SHERWOOD IMPELLERS - FOR IMPELLER SELECTION GUIDE SEE NEXT PAGE
Mfr. No. 09959K
ORDER NO: 651-09959 ORDER NO. 651-27000K
Mfr. No.10615K
ORDER NO: 651-10615
Mfr. No.15000K
ORDER NO: 651-15000
750
Mfr. No. . . . . . . . .15000K B Dia (A) . . . . . . . . .2-9/16" 65.0mm Width (B) . . . . . . .2" 51mm Shaft (C) . . . . . . .5/8" Keyway (D) . . . . . .3/16" No. of Vanes . . . . .12 Material . . . . . . . .Neoprene
To maintain engine performance, insist upon GENUINE Sherwood Impellers. Imitation leaves you dead in the water!
D
ORDER NO.
651-30000K
Mfr. No.10077K
ORDER NO: 651-10077
ORDER NO. 651-08000 651-10077 651-09000 651-09959 651-10615 651-15000 651-17000 651-18000 651-26000K 651-27000K 651-29000K 651-30000K
Mfr. No. 08000K 10077K 09000K 09959K 10615K 15000K 17000K 18000K 26000K 27000K 29000K 30000K
WIDTH (B) 19.0mm 19.8mm 22.2mm 31.7mm 41.0mm 51.0mm 73.0mm 101.5mm 80.0mm 73.0mm 102mm
SHAFT DIA. (C) 7/16" 1/2" 5/8" 5/8" 5/8" 5/8" 20mm 15/16" 11/12" 3/4" 15/16" 15/16"
KEYWAY (D) D-Slot 3/32" 3/16" 3/16" 3/16" 3/16" 3/16" Spline Spline Spline Spline Spline
NO. OF VANES 6 12 12 12 12 12 12 12 12 12 12 10
Material Neoprene Neoprene Neoprene Neoprene Neoprene Neoprene Neoprene Neoprene Neoprene Neoprene Neoprene Neoprene
25/32" 7/8" 1-1/4" 1-5/8" 2" 2-7/8" 4" 3-1/8" 2-7/8" 4"
2-7/16" 61.9mm 2-7/16" 61.9mm 2-9/16" 65.0mm 2-9/16" 65.0mm 3-5/16" 84.0mm 3-3/4" 3-3/4" 95.0mm 95.0mm
4-5/16" 110mm
To maintain engine performance, insist upon genuine Sherwood impellers. Keep it cool with the original! K = Kit (Includes: Impeller, Gasket, and O-Ring) 18000K and 26000K do not include P.O.P. packaging NeopreneTM Maximum Temperature: 130F
751
KOHLER
ORDER No. 651-00907
MODEL # R30G-1
Engines: 6 Cyl. Diesel Westerbeke: 24102 Inlet port: 1/2" NPT Outlet port: 1/2" NPT
ORDER NO. 651-24025 651-10077
Mfr. No. 24025 10077K+ 00336 00343 01311 Description Major Repair Kit Impeller Kit Plug Lockwasher Dowel pin Bushing (Graphite) Retaining Ring (Int) Retaining Ring (Ext) Ball Bearing Screw (Machine) Woodruff Key Cam Screw Gasket Cover Cam Body Seal & Seat Assy. Key - Square Screw (Hex Head) 1 1 8 2 1 1 3 1 2 1 1 1 1 1 1 1 1 6 Qty.
MODEL # G907P
Engines: Ford Inlet port: 3/8" NPT, Outlet port: 3/8" NPT
ORDER NO. 651-09000
Mfr. No. 09000K 00343 04258 04259 04264 10195 10926 12211 18576 18035 18573 18574 Description Impeller Kit Lock Washer Retaining Ring (Ext) Retaining Ring (Int) Flat Washer Cam Screw Seal Seat Ball Bearing Woodruff Key Mechanical Seal Cap Screw Lock Washer Cam O-Ring Flat Washer Pully Housing Screw Socket HD Cap Spacer Shaft Cover Plate Lock Washer Serrated Flange Nut Qty. 1 4 2 1 1 1 1 2 1 1 2 2 1 1 1 1 1 4 1 1 1 1 1 + Items contained in Service Kits Qty. 1 1 1 2 1 1 1 1 2 1
651-04258 651-04259
651-10195
02075+ 04303+ 04304+ 04306+ 05437 10093+ 10195 10197+ 10279 10285+ 10596 11367+ 13370 18899
651-18663
18663 19964 21857 21859 21862 21916 21974 24124 24125 24126 24127
PLEASURECRAFT
ORDER No. 651-10140
Description Cam Screw Assy. Cam Wear Plate Retaining Ring Water Seal/Seat Assy. Washer Hub Retaining Ring Bearing Spacer
MODEL # P1014
Inlet port: 1-1/4" Outlet port: 1-1/4"
651-10615 10615K+,
23966 00343 21120+ 24107
651-04259 04259+,
12211+ 05133
+ Items contained in Major Repair Kits Items contained in Minor Repair Kits
Full Flow Filtering with Ultra Low Pressure Differential Easy In-Line Cleaning Durable Non-Corrosive Construction Quick Clean Bowl Examination Lightweight with Optional Mounting Bracket Stainless Steel Screens
ORDER NO. 651-15935 651-18001 651-18005 651-18016 651-18029
752
CHRIS CRAFT
ORDER NO. 651-00360
MODEL # G45-1
Engines: 454 Chris Craft #16.80-18347 Inlet port: 1-1/4" Outlet port: 1-1/4" Mfr. No. Description 23976 Minor Repair Kit 23977 Major Repair Kit 12328 Body 12228 Housing 651-10615 10615K+, Impeller 651-12231 12231+, O-Ring 651-12856 12856+ Wear Plate 651-12855 12855+ Gasket 651-04432 04432+, Key 12612 Shaft 651-04258 04258+, Retaining Ring (Ext) 651-04259 04259+ Retaining Ring (Int) 12791 Pin 651-23448 23448+ Ball Bearing 651-10944 10944+ Cam 651-10515 10515C Cam Screw 12615 Hub 651-12859 12859+, Seal/ Seat Assy. 12857 Screw 12710 Lock Washer 04264+, Washer 05133 Spacer + Items contained in Major Repair Kits Items contained in Minor Repair Kits
ORDER NO. 651-23976 651-23977
MODEL # N10360GX
Engines: 430, 283 Chris Craft #16.80-10003 Inlet port: (2) 1/2" NPT Outlet port: (2) 1/2" NPT Mfr. No. Description 10244 Minor Repair Kit 12301 Major Repair Kit 09909 Body 10416C Housing 651-10077 10077K+, Impeller Kit 09918+, O-Ring 10079 Wear Plate 09917+, Gasket 651-10093 10093 Key 10078+ Shaft 651-04304 04304 Retaining Ring (Ext) 09907 Cover 00528 Pin 04306+, Ball Bearing 10134 Cam 651-09919 09919 Cam Screw 02075+, Bushing 10546+, Seal/ Seat Assy. + Items contained in Major Repair Kits Items contained in Minor Repair Kits
ORDER NO.
Qty 1 1 1 1 1 1 1 1 3 2 1 2 1 1 1 1 3 3 1 1
Qty
1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1
ONAN
ORDER NO. 651-01006
MODEL # G1006
Engines: 5 Cyl. Diesel Inlet port: 1" Outlet port: 1" Mfr. No. Description 22276 Major Repair Kit 22141 Body 21150 Housing 651-10615 10615K+ Impeller 651-12231 12231+ O-Ring 22142+ Wear Plate 651-04432 04432+ Key 22143 Shaft 651-04258 04258+ Retaining Ring (Ext) 651-04259 04259+ Retaining Ring (Int) 22140 Cover 21056 Pin 651-23448 23448 Ball Bearing 651-10929 10929+ Cam 651-10515 10515C Cam Screw 651-06333 06333 Bushing 651-22117 22117 Seal/ Seat Assy. 651-21208 21208 Lip Seal + Items contained in Major Repair Kits
ORDER NO.
MODEL # P105
Qty 1 1 1 2 1 1 1 3 2 1 4 1 1 1 1 1 1 Inlet port: 1-1/4" Outlet port: 1-1/4" Mfr. No. Description 19354 Major Repair Kit 21120 Cover 21378 Body 651-10615 10615K+ Impeller 651-12231 12231+ Gasket 651-04432 04432 Key 19308+ Shaft 05126+ Retaining Ring 06837+ Retaining Ring 651-08490 08490+ Ball Bearing 651-10944 10944 Cam 651-10515 10515C Cam Screw 651-18652 18652+ Seal/ Seat Assy. 19275 Hub + Items contained in Major Repair Kits
ORDER NO.
Qty 1 1 1 1 1 1 1 1 2 1 1 1 1
753
VOLVO/OMC
ORDER NO. 651-09901
CHRIS CRAFT
ORDER NO. 651-00030-2
MODEL # G9901
(pulley dia. 6.5) Engines: 6-8 Cyl. Volvo/OMC# 3852398 Inlet port: 1-1/4" Outlet port: 1"
ORDER NO. 651-12665 651-09959 651-04258 651-04259 651-04432 651-10515 651-12855 651-12856 651-12859 651-15883 651-23448
Mfr. No. 12665 09959K+ 04258+ 04259+ 04264+ 04432+ 05133 10515C+ 12855+ 12856+ 12857 12859+ 15883+ 21757 23448+
MODEL # G30-B2B
Engine: 350 Chris Chraft # 16.80-18346 Inlet port: 1" Outlet port: 1"
Description
Major Repair Kit Impeller Kit Retaining Ring (Ext) Retaining Ring (Int) Washer Woodruff Key Spacer Cam Screw Assy. Gasket End Plate Cap Screw Seal & Seat Assy. Cam Lock Washer Ball Bearing 1 3 2 1 1 1 1 1 1 3 1 1 3 2 Qty.
Mfr. No. 12665 09959K+ 04258+ 04259+ 04264+ 04432+ 05133 10515C+ 12710 12791
Description Major Repair Kit Impeller Kit Retaining Ring (Ext) Retaining Ring (Int)
Qty. 1 3 2 1 1 1 1 3 1 1 1 3 1 1 2
Washer
Woodruff Key Spacer Cam Screw Assy. Lock Washer Pin - SS Gasket End Plate Cap Screw Seal & Seat Assy. Cam Ball Bearing
ONAN
ORDER NO. 651-00075
YAMAHA
ORDER NO. 651-00991
MODEL # K75B
Engines: 4 Cyl. Diesel Inlet port: 1" Outlet port: 1"
ORDER NO.
651-12665 651-09959 651-04258 651-04259 651-04432 651-10515
Mfr. No. 12665 09959K+ 04258+ 04259+ 04264+ 04432+ 05133 10515C+ 12710 12855+ 12856+ 12859+ 13794 13795 Description Major Repair Kit Impeller Kit Retaining Ring (Ext) Retaining Ring (Int) Washer Woodruff Key Spacer Cam Screw Assy. Lock Washer Gasket End Plate Seal & Seat Assy. Cap Screw Hub Cam Ball Bearing 1 3 2 1 1 1 1 3 1 1 1 3 1 1 2 Qty.
MODEL # R991
Engines: 4.3 V6 and 305/350 V8 Chevy Yamaha # 10100000 Inlet port: 1-1/4" Outlet port: 1-1/4"
ORDER NO. 651-09959 651-04257 651-04258 651-04259 651-06333 651-10515 651-10927
Mfr. No. 18655 09959K+ 04257+ 04258+ 04259+ 06333+ 10515C 10927+ 12710 12841 Description Major Repair Kit Impeller Kit Bearing Retaining Ring (Ext) Retaining Ring (Int) Bushing (Graphite) Cam Screw Assy. Seal & Seat Assy. Lock Washer Key Cam-Br Capscrew Housing Cover Pulley Shaft-316SS 1 1 3 1 1 1 1 3 1 1 3 1 1 1 1 Qty.
651-12855
651-12856 651-12859
651-15883
651-15883 651-23448
15883+ 23448+
754
CHRYSLER
ORDER NO. 651-00007
CRUSADER
ORDER NO. 651-00035
MODEL # G7B
Engines: 318 and 360 Chrysler # 4142878 Inlet port: 1-1/4" Outlet port: 1-1/4"
ORDER NO. 651-23977 651-10615 651-04258 651-04259 651-04432 651-10515 651-10929 651-12855 651-12856 651-12859 651-23448
Mfr. No. 23977 10615K+ 04258+ 04259+ 04264+ 04432+ 05133 10515C+ 10929+ 12710 12855+ 12856+ 12857 12859+ 12952 23448+ Description Major Repair Kit Impeller Kit Retaining Ring (Ext) Retaining Ring (Int) Washer Woodruff Key Spacer Cam Screw Assy Cam Lock Washer Gasket Ends Plate Cap Screw Seat & Seal Assy Housing Ball Bearing 1 3 2 1 1 1 1 1 3 1 1 3 1 1 2 Qty.
MODEL # E35
Engines: 220, 270, 300, and 350 Crusader # 97179 Inlet port: 1" NPT Outlet port: 1" NPT
ORDER NO. 651-11068 651-10615
Mfr. No. 11068 10615K+ 00336 01311 Description Major Repair Kit Impeller Kit Plug Dowel pin Ball Bearing Retaining Ring (Ext) Retaining Ring (Int) Woodruff Key Bushing (Graphite) Cover Seal & Seat Assy. Cam Shaft Lock Washer Screw Hub 1 2 2 1 2 1 1 1 1 1 1 1 4 4 1 Qty.
04257+ 04258+ 04259+ 04432+ 06333+ 10182 10927+ 10944+ 11744 12710 17485 97176
PCM
ORDER NO. 651-00021
VOLVO/OMC
ORDER NO. 651-09903
MODEL # G21
Engines: Ford 351 / 302 Pleasurecraft # RA057007 Inlet port: 1" Outlet port: 1"
ORDER NO. 651-12665 651-09959 651-04258 651-04259 651-04432 651-10515
Mfr. No. 12665 09959K+ 04258+ 04259+ 04264+ 04432+ 05133 10515C+ 12303 12710 Description Major Repair Kit Impeller Kit Retaining Ring (Ext) Retaining Ring (Int) Washer Woodruff Key Spacer Cam Screw Assy. Housing Lock Washer Gasket End Plate Cap Screw Seal & Seat Assy. Cam Ball Bearing 1 3 2 1 1 1 1 1 3 1 1 3 1 1 2 Qty.
MODEL # G9903
(pulley dia. 4.5) Engines: 4 Cyl. Volvo / OMC # 3855079 Inlet port: 1-1/4" Outlet port: 1"
ORDER NO. 651-12665 651-09959 651-04258 651-04259 651-04432 651-10515 651-12855 651-12856 651-12859 651-15883
Mfr. No. 12665 09959K+ 04258+ 04259+ 04264+ 04432+ 05133 10515C+ 12855+ 12856+ 12857 12859+ 15883+ 21151 21757 Description Major Repair Kit Impeller Kit Retaining Ring (Ext) Retaining Ring (Int) Washer Woodruff Key Spacer Cam Screw Assy. Gasket End Plate Cap Screw Seal & Seat Assy. Cam Housing Lock Washer Ball Bearing 1 3 2 1 1 1 1 1 1 3 1 1 1 3 2 Qty.
651-23448
23448+
755
Part No.
Reduces Lead1, mercury1, cysts1 and VOCs1 Sediment and rust down to 0.5 micron
DEDICATED FAUCET UNDERSINK SYSTEM 561-46060 5614606 USF-C FULL FLOW UNDERSINK SYSTEM 561-55060 5615506
US-B1
2,000 gal/7570 L 99.9% of common water-borne bacteria2, mould spores3, algae3, and parasitic protozoan cysts1 Chlorine taste and odour Sediment and rust down to 0.2 micron 99.9% of common water-borne bacteria2, mould spores3, algae3, and parasitic protozoan cysts1 Chlorine taste and odour Sediment including dirt, rust, sand and silt
5616309
WV-B3
1 As tested in accordance with NSF/ANSI Standard 53. 2 As tested with either E.Coli ATCC (11229) or Pseudomonas (B) diminuta ATCC (19146) 3 As tested with Dekkera bruxellensis ATCC (62476)
756
PLUMBING FITTINGS
PLUMBING & FITTINGS
ORDER NO. 732-88000 732-88050 732-88100
Mfr. No. 8800 8805 8810 8830 8835 8840 8845 8850 8855 8860 8865 8870 8875 8880 8885 8890 8895 8899
Description Adapter, 5/8" Barb x 5/8"Hose Barb Adapter, 5/8" Barb x 3/4" Hose Barb Adapter, 5/8" Barb x 1" Hose Barb Adapter, 3/4" Barb x 3/4" Hose Barb Adapter, 3/4" Barb x 1" Hose Barb Adapter, 3/4" Barb x 1-1/8" Hose Barb Adapter, 3/4" Barb x 1-1/4" Hose Barb Adapter, 3/4" Barb x 1-1/2" Hose Barb Adapter, 1" Barb x 1" Hose Barb Adapter, 1" Barb x 1-1/8" Hose Barb Adapter, 1" Barb x 1-1/4" Hose Barb Adapter, 1" Barb x 1-1/2" Hose Barb Adapter, 1-1/8" Barb x 1-1/8" Hose Barb Adapter, 1-1/8" Barb x 1-1/4" Hose Barb Adapter, 1-1/8" Barb x 1-1/2" Hose Barb Adapter, 1-1/4" Barb x 1-1/4" Hose Barb Adapter, 1-1/4" Barb x 1-1/2" Hose Barb Adapter, 1-1/2" Barb x 1-1/2" Hose Barb
Cuts installation time & labour All threads are standard tapered pipe
732-87000
732-88300 732-88350 732-88400 732-88450 732-88500 732-88550 732-88600 732-88650 732-88700 732-88750 732-88800 732-88850 732-88900 732-88950 732-88990
732-87300
732-87500
ORDER NO. 732-87000 732-87010 732-87050 732-87060 732-87100 732-87120 732-87300 732-87310 732-87340 732-87350 732-87370 732-87490 732-87500 732-87510 732-87580 732-87600 732-87610 732-87620 732-87660 732-87700 732-87720 732-87730 732-87760 732-87820
Mfr. No. Description 732-88000 8700 8701 8705 8706 8710 8712 8730 8731 8734 8735 8737 8749 8750 8751 8758 8760 8761 8762 8766 8770 8772 8773 8776 8782 Adapter, 1/2" FPT x 1/2" FPT Adapter, 1/2" FPT x 3/4" FPT Adapter, 3/4" FPT x 3/4" FPT Adapter, 3/4" FPT x 1" FPT Adapter, 1" FPT x 1" FPT Adapter, 1" FPT x 1-1/2"FPT Adapter, 1/2" FPT x 1/2" MPT Adapter, 1/2" FPT x 3/4" MPT Adapter, 1/2" FPT x 1-1/2" MPT Adapter, 3/4" FPT x 1/2" MPT Adapter, 3/4" FPT x 1" MPT Adapter, 1-1/4" FPT x 1-1/2" MPT Adapter, 1/2" FPT x 5/8" Hose Barb Adapter, 1/2" FPT x 3/4" Hose Barb Adapter, 3/4" FPT x 5/8" Hose Barb Adapter, 3/4" FPT x 3/4" Hose Barb Adapter, 3/4" FPT x 1" Hose Barb Adapter, 3/4" FPT x 1-1/8" Hose Barb Adapter, 1" FPT x 3/4" Hose Barb Adapter, 1" FPT x 1" Hose Barb Adapter, 1" FPT x 1-1/4" Hose Barb Adapter, 1" FPT x 1-1/2" Hose Barb Adapter, 1-1/4" FPT x 1" Hose Barb Adapter, 1-1/4" FPT x 1-1/2" Hose Barb
732-89900 732-89000
ORDER NO. 732-89000 732-89010 732-89100 732-89130 732-89220 732-89230 732-89240 732-89250 732-89330 732-89350 732-89410 732-89420 732-89430 732-89440 732-89450 732-89900
Mfr. No. Description 8900 8901 8910 8913 8922 8923 8924 8925 8933 8935 8941 8942 8943 8944 8945 8990 8995 Adapter, 1/2" MPT to 5/8" Barb Adapter Adapter, 1/2" MPT to 3/4" Barb Adapter Adapter, 3/4" MPT to 5/8" Barb Adapter Adapter, 3/4" MPT to 1-1/8" Barb Adapter Adapter, 1" MPT to 1" Barb Adapter Adapter, 1" MPT to 1-1/8" Barb Adapter Adapter, 1" MPT to 1-1/4" Barb Adapter Adapter, 1" MPT to 1-1/2" Barb Adapter Adapter, 1-1/4" MPT to 1-1/8" Barb Adapter Adapter, 1-1/4" MPT to 1-1/2" Barb Adapter Adapter, 1-1/2" MPT to 3/4" Barb Adapter Adapter, 1-1/2" MPT to 1" Barb Adapter Adapter, 1-1/2" MPT to 1-1/8" Barb Adapter Adapter, 1-1/2" MPT to 1-1/4" Barb Adapter Adapter, 1-1/2" MPT to 1-1/2" Barb Adapter Adapter, 1-1/4" MPT to 1-1/4" MPT Adapter Adapter, 1-1/2" MPT to 1-1/2" MPT Adapter
757
PLUMBING FITTINGS
BULKHEAD CONNECTORS
Ideal for hose, cable or wires Molded of high-strength engineering plastic for long term durability Designed to reduced hose and cable chafing
ORDER NO. 732-79000 732-79100 732-79800 732-79900
Mfr. No. Description 7900 7910 7980 7990 Bulkhead Connector, 1-1/2", Black, Long Bulkhead Connector, 1-1/2", Black, Short Bulkhead Connector, 3/4", Black Bulkhead Connector, 5/8", Black 732-79000
HOSE BARBS
Provide tight fit without electrical bonding Fits marine sanitation hose Molded of high-impact nylon Threads have been precision molded fo proper fit Resists electrolysis
ORDER NO. 732-80010 732-80020 732-80030 732-80050 732-80100
Mfr. No. Description 8001 8002 8003 8005 8010 Hose Barb, 5/8" Hose, 1/2" MPT Hose Barb, 3/4" Hose, 3/4" MPT Hose Barb, 1" Hose, 1" MPT Hose Barb, 1-1/2" Hose, 1-1/2" MPT Hose Barb, 5/8"Hose, 3/4"FPT
732-80010
100 Angled elbow allows complete drainage & eliminates chances of clogging Low profile design maximizes uses Fits marine sanitation hose Molded of rugged nylon for strength & durability
ORDER NO. 732-80320 732-80340 732-80570 732-80580
Mfr. No. Description 8032 8034 8057 8058 Elbow, 100, 1" Hose I.D. x 1"MPT, Short Thread, Male-Barb Elbow, 100, 1" Hose I.D. x 1" Hose, Barb-Barb Elbow, 100, 1-1/2" Hose I.D. x 1-1/2"MPT, Short Thread, Male-Barb Elbow, 100, 1-1/2" Hose I.D., x 1-1/2"FPT, Female to Barb
732-80320
Mfr. No. Description 8070 8080 Angled "T" Fitting, 1-1/2" Barbed Angled "T" Fitting, 1-1/2" Barbed w/Threaded End 732-80700
EXHAUST PORTS
Designed for engines with water cooled exhaust systems Optional flap for secure seal Molded in nylon
ORDER NO. 732-81040 732-81170 732-81180
Mfr. No. Description 8104 8117 8118 Exhaust Port, 4", Black 3 or 4" Exhaust Port Flap 3 or 4" Exhaust Port Split Pin
732-81040
758
PLUMBING FITTINGS
Allows proper tank venting while preventing fuel contamination Fits standard 5/8" marine hose Built-in baffle prevents contamination Molded of non-corrosive nylon for long-time service and durability
ORDER NO. 732-30120
100 Angled Elbow lessens likelihood of clogging Flush head fits most standard showers Fits marine sanitation hose Flush head allows complete drainage
ORDER NO. 732-39990 732-40490 732-40540 732-41150
Description Shower Drain Elbow, Hose 3/4" w/screen Shower Drain Elbow, 1" Hose w/short thread Shower Drain Elbow, 1" Hose w/long thread Shower Drain, Straight, 1-1/2" Hose
732-39990
Low profile head affords excellent drainage Ideal for both scuppers & deck drains Fits marine sanitation hose
ORDER NO. 732-41110
Flush head allows complete drainage Fits sanitation hose Assembly includes nut 100 angled (elbow drains) drain considerably faster than 90 elbows
ORDER NO. 732-63220 732-67720
Description Elbow Drain, 1-1/8" Hose, w/screen, White Straight Drain, 1-1/2" Hose ,w/screen, White
FIRE PORTS
ENABLES CREW TO DETECT ENGINE FIRES QUICKLY & EXTINGUISH THEM SAFELY Gives you the opportunity to eliminate, or at least control, the situation until help can arrive Allows you to visually inspect an engine compartment without opening it & adding oxygen to the fire
ORDER NO. 732-68000 732-69900
732-6322W
Description Fire Extinguisher Port, Engine Box, 2.7" dia. - I/O & Inboard Fire Extinguisher Port, Clear w/Ring, 2.7" dia. & Sticker - I/O & Inboard 732-68000
759
PLUMBING FITTINGS
STARTER KITS
Quick connect fittings for Pex, Copper, CPVC and Polybutylene Tubing Buy a complete kit or order components separately to design your design Choose from 3/8, 1/2 and 3/4 CTS and 15MM fittings All parts tagged with UPC colour tags : Orange for 3/8"
Blue for 1/2" and 15 MM Green for 3/4"
135-161004 013516-1004 135-161008 013516-1008 135-131008 013513-1008 135-10108 135-20108 135-11008 135-19108 135-39100 135-40100 135-43104 135-45100 135-47100 115-00500 013510-1008 013520-1008 013501-1008
135-011012 013501-1012 013519-1008 135-211008 013521-1008 013539-10 013540-10 013543-1004 013545-10 013547-10 B500 BHS100 BSP100 BLK100 *Note: Also available
* Kit comes packaged in bins with UPC labels, display header sign, and sample part ready for display
BK100 Tilt Bin Starter Kit, 3/8" & 1/2" CTS Fittings BK200 Tilt Bin Starter Kit, 1/2" & 3/4" CTS Fittings BK205 Tilt Bin Replacement Kit, 1/2" CTS Fittings
760
PLUMBING FITTINGS
24 SERIES 1/2 CTS FITTINGS - Lead Free Sea Tech 24 Series quick connect products are produced from FDA approved materials certified and approved to NSF-61 standards and are suitable for contact with drinking water. 24 Series products are designed and manufactured in a bright white thermal plastic and are applicable for many applications including Water Plumbing, Car Wash, Water Filtration and Aquariums. 24 Series fittings are produced in standard imperial inch sizes and interconnect with all Sea Tech 35 Series connections. Sea Tech 24 Series fittings directly connect to a variety of plastic, copper and CPVC piping. Simply cut the piping and snap a Sea Tech quick-connect fitting into place for a leak free connection. Fitting Performance Rating: Operating Pressure: Vacuum to 250psi Max Temperature: 140F @ 100psi / 75F @ 250psi BK400 TILT BIN STARTER KIT 15MM & 1/2" CTS Fittings
ORDER NO. 115-00400 Kit Contains: ORDER NO. 111-00815 111-51515 111-61015 111-71515 111-81515 112-00815 112-31515 103-31515 114-51500 114-71500 BK400 TILT BIN STARTER KIT 240-20815 241-30815 243-90415 243-91515 Mfr. No. Description 15MM Fittings 011110-0815 011115-1515 011116-1015 011117-1515 011118-1515 011120-0815 011123-1515 011133-1515 011145-15 011147-15 012402-0815 012413-0815 012439-0415 012439-1515 Female Connector, 15MM x 1/2 NPS Union Connector, 15MM Reducing Union, 15MM x 1/2 CTS Union Elbow, 15MM Stackable Elbow, 15MM Female Connector Elbow, 15MM x 1/2 NPS Union Tee, 15MM Stackable Tee, 15MM End Stop, 15MM Collet Clip, 15MM, (3 Per Pack 5) Male Connector, 15MM x 1/2 NPT Hose Barb Fitting, 15MM x 1/2 H.B. Reducing Stop Valve, 15MM x 1/4 OD Stop Valve, 15MM 24 Series 124-011008 012401-1008 124-101008 012410-1008 124-41510 124-17100 124-18100 124-23100 124-33100 135-39100 124-45100 135-47100 115-00500 012415-10 012417-10 012418-10 Male Connector, 1/2 CTS x 1/2 NPT Female Connector, 1/2 CTS x 1/2 NPS Union Connector, 1/2 CTS Union Elbow, 1/2 CTS Stackable Elbow, 1/2 CTS Female Connector Elbow, 1/2 CTS x 1/2 NPS Union Tee, 1/2 CTS Stackable Tee, 1/2 CTS Stop Valve, 1/2 CTS End Stop, 1/2 CTS Collet Clip, 1/2 CTS, (3 per pack ) 5 Bin Section for 3/8" & 1/2" Fittings (Empty) 22" X 8" Display Header Sign Bin System Sample Part Tilt Bin Labels 5/ea 5/ea 5/ea 5/ea 5/ea 5/ea 5/ea 5/ea 5/ea 5/ea 5/ea 4/ea 1/ea 1/ea 1/ea 5/ea 5/ea 5/ea 5/ea 5/ea 5/ea 5/ea 5/ea 5/ea 5/ea 5/ea 5/ea 5/ea 5/ea Mfr. No. BK400 Qty In Kit
124-201008 012420-1008 012423-10 012433-10 013539-10 012445-10 013547-10 B500 BHS100 BSP100 BLK100
* Kit comes packaged in bins with UPC labels, display header sign, and sample part ready for display
761
PLUMBING FITTINGS
BK300 TILT BIN STARTER KIT 35 SERIES 3/8", 1/2" AND 3/4" CTS Fittings (Lead Free)
Order No. 135-00300 (Complete Kit) Mfr. No. BK300 Kit Contains: ORDER NO. 135-010808 135-100808 135-141008 135-15080 135-161008 135-17080 135-18080 135-200808 135-23080 135-47080 124-141004 135-11008 135-011014 135-10108 135-131008 135-15100 135-17100 135-18100 135-20108 135-211008 135-23100 135-33100 135-39100 135-45100 135-47100 135-011412 135-101412 135-141410 135-15140 135-17140 135-18140 135-23140 135-241410 135-47140 115-00500 115-04000 Mfr. No. 013501-0808 013510-0808 013514-1008 013515-08 013516-1008 013517-08 013518-08 013520-0808 013523-08 013547-08 012414-1004 013501-1008 013501-1014 013510-1008 013513-1008 013515-10 013517-10 013518-10 013520-1008 013521-1008 013523-10 013533-10 013539-10 013545-10 013547-10 013501-1412 013510-1412 013514-1410 013515-14 013517-14 013518-14 013523-14 013524-1410 013547-14 B500 B400 BHS100 BSP100 BLK100 Description Male Connector, 3/8 CTS x 1/2 NPT Female Connector, 3/8 CTS x 1/2 NPS Reducing Stem, 1/2 CTS x 3/8 CTS Union Connector, 3/8 CTS Reducing Union, 1/2 CTS x 3/8 CTS Union Elbow, 3/8" CTS Stackable Elbow, 3/8" CTS Female Connector Elbow, 3/8" CTS x 1/2" NPS Union Tee, 3/8 CTS Collet Clip, 3/8 CTS, 3 per pack Reducing Stem 1/2 CTS x 1/4 OD Male Connector, 1/2 CTS x 1/2 NPT Male Connector, 1/2 CTS x 3/4 MGHT Female Connector, 1/2 CTS x 1/2 NPS Hose Barb Fitting, 1/2 CTS x 1/2 H.B. Union Connector, 1/2 CTS Union Elbow, 1/2 CTS Stackable Elbow, 1/2 CTS Female Swivel Elbow, 1/2 CTS x 1/2 NPS Drop Ear Elbow, 1/2 CTS x 1/2 NPT Union Tee, 1/2" CTS Stackable Tee, 1/2 CTS Stop Valve, 1/2" CTS End Stop, 1/2" CTS Collet Clip, 1/2" CTS, 3 per pack Male Connector, 3/4 CTS x 3/4" NPT Female Connector, 3/4 CTS x 3/4 NPS Reducing Stem, 3/4 CTS x 1/2 CTS Union Connector, 3/4 CTS Union Elbow, 3/4 CTS Stackable Elbow, 3/4 CTS Union Tee, 3/4 CTS Reducing Tee, 3/4 CTS x 1/2 CTS Collet Clip, 3/4 CTS, 3 per pack 5 Bin Section for 3/8", 1/2", Fittings (Empty) 4 Bin Section for 3/4" Fittings (Empty) 22" X 8" Display Header Sign Bin System Sample Part Tilt Bin Labels Qty In Kit 5/ea 5/ea 5/ea 5/ea 5/ea 5/ea 5/ea 5/ea 5/ea 5/ea 5/ea 5/ea 5/ea 5/ea 5/ea 5/ea 5/ea 5/ea 5/ea 5/ea 5/ea 5/ea 5/ea 5/ea 5/ea 5/ea 5/ea 5/ea 5/ea 5/ea 5/ea 5/ea 5/ea 5/ea 6/ea 1/ea 1/ea 1/ea 1/ea BK300 TILT BIN STARTER KIT
762
PLUMBING ACCESSORIES
SEA TECH TUBING
Sea Tech tubing is produced from a high performance, cross-linked Polyethylene material. Sea Tech tubing is NSF listed, FDA recognized and available in multiple colors for ease of water line identification. 50 Coil in dispensing box.
135-15850
METRIC TUBING
Tubing Performance Rating: Operating Pressure: Vacuum to 160psi Max Temperature: 180F @ 100psi 72F @ 160psi ORDER NO. 110-15501 110-15502 Mfr. No. 001550B 001550R Description 15MM Blue 15MM Red
135-25850
Operating Pressure: Vacuum to 160psi Max Temperature: 180F @ 100psi 72F @ 160psi ORDER NO. 135-15850 135-25850 135-35850 Mfr. No. 00B5850 00R5850 00W5850 Description 1/2 CTS (5/8 O.D.) Blue 1/2 CTS (5/8 O.D.) Red 1/2 CTS (5/8 O.D.) White
135-35850
TUBING ACCESSORIES
TUBE CUTTER
ORDER NO. 115-81522 Mfr. No. 1158-1522
REPLACEMENT BLADE
ORDER NO. 116-11522 Mfr. No. 1161-1522
ELBOW CLIP
1/2 CTS or 15MM ORDER NO. 123-49150 Mfr. No. 2349-15
763
DIMENSIONS CYLINDER INCHES 3-1/2 x 4 3-1/2 x 6 4-1/2 x 5-1/2 4-1/2 x 6 6x8 6 x 12 6 x 12 DIMENSIONS CYLINDER INCHES 8 x 10 8 x 12 8 x 14
DIMENSIONS BASKET INCHES 1-13/16 x 4-3/8 1-13/16 x 6-1/4 2-5/8 x 5-7/8 2-5/8 x 6-1/4 3-5/16 x 8-7/16 3-5/16 x 12-1/4 3-5/16 x 12-1/2 DIMENSIONS BASKET INCHES 3-7/8 x 10-1/4 3-7/8 x 12-1/4 3-7/8 x 14-1/4
OPEN AREA TO PIPE SIZE RATIO 30:1 25:1 20:1 13:1 17:1 13:1 10:1 OPEN AREA TO PIPE SIZE RATIO 20:1 18:1 14:1
*Spare Gasket Kit Consists of: 1 - Cover Gasket and, 2 - Cylinder Gaskets.
ORDER NO. 621-49304 621-49305 621-49306 621-49307 621-49308 621-49309 621-49310 *Cork Spare Gasket Kit consists of 1 - Cover Gasket and, 2 - Cylinder Gasket
764