PENGUARD PRIMER
1) General properties 1) General Description : Two-pack, Rust preventing epoxy primer 2) Type of binder : Epoxy - Polyamide 3) The range of available Colour : Red, Grey 4) Mixing ratio : Comp.A : comp.B = 4 : 1 by vol 5) Name of thinner : Jotun Thinner No.17 6) Chemical name of alt. thinner : Solvent mixture 7) Delivery form (package) : Comp.A 12 Ltr, Comp.B 3 Ltr tin can 8) Status of certification : North of Engl. Ind. Health service See-Berufsgenossen schaft SIFF / Textron / Thermal Science Inc. 2) Physical and chemical properties Item Specific gravity after mixing at 23 Viscosity (poise at 23 ) Solid volume(%) T.S.R (M2 /LT) Standard film thickness(WFT/DFT) Applicable film range(WFT/DFT) Content of pigment (%) Content of binder (%) Content of solvent (%) Fineness of grind (B) (Mic) Anti-sagging (Max WFT/DFT) Adhesion power of steel Adhesion power of shop primer Adhesion power of under coat Max.heat resistance (continuous/non-continuous) Max.refrigeration resistance (continuous/non-continuous) Chemical resistance Sea water resistance Compatibility with IZ 182 Hemple shopprimer 1577 Standard 1.20-1.40 1-3 49-53 10.2 100/50 80-120/40-60 34-40 25-31 31-27 50 195/100 Excellent Excellent Excellent 90/120 -10/-20 Excellent Very good Compatible Test Method KSM5000-2131 ASTM D4287 ISO 3233 1998(E) Remarks
Technical Information
PENGUARD PRIMER
2-1) Technical data in detail
TEMP
-10
-5
20 1H 5H F 8H 8H 9D 7D 5H 10H
25 1H 4H F 6.5H 6.5H 7D 6D 4H 8H
30 0.5H 3H F 5H 5H 5D 4D 3H 6H
35 0.5H 2H F 4H 4H 3D 2D 2H 4H
40
Touch-Up
* F : Free (Immersion areas : Refer to special notice application) 3) Paint work 3-1) Min. surface preparation grade by SIS 05 5900 1967 & JSRA On Shop Primer Burnt area Rerusted area Intact area Millscale Pt. 3 Pt. 3 Salts to be removed To be removed On steel Plate St. 3 St. 3 Contaminations to be removed To be removed
Technical Information
PENGUARD PRIMER
3-2) Application Condition Item Application equipment Max. thinning ratio by vol Min.steel temp. above dew point Relative humidity for application (Min. & Max.) Applicable substrate temperature (Min. & Max.) Max. exposure time at atmosphere Air pressure Paint pressure Nozzle tip Gun speed Time of overlap Distance between surface And spray gun. Standard Airless 10% 3 Max.85% 5/50 Indefinite Min.150 / 0.018-0.023 50% 20-40 Std Phenomenon In painting Test Method Remarks
4) Special notice for Application When applied to immersion service areas, Max. recoating interval has to be limited. The detail data is as below table. Temp 5 10 15 20 25 30 Dry to recoat Min. Max. 16H 21D 8H 14D 6H 12D 5H 9D 4H 7D 3H 5D
35 2H 3D