Flowserve Corporation, Valtek Control Products, Tel. USA 801 489 8611
For Single or Double-acting Actuators Easily Field Reversed Easy Calibration Procedures
Split-Range Service
Replaceable Coalescing Filter (NT 3000 module only) Simplified Maintenance No Regulator Required
Changeable Flow Characteristics Insensitive to Mounting Position Output Gauge Helps Monitor Unit
Self-controlling Internal Regulator Reduces pressure to 22 psi, eliminating need for external regulator. (NT 3000 module) Corrosion Resistant Parts for Long Life Low Air Consumption High Air Flow Gain Model Oxygen Service Model Cover and base assembly are epoxy powder painted and continuously purged from the inside with instrument air. Internal working parts are constructed from 300 series stainless steel, anodized aluminum or Buna-N. Steady state air consumption is .25 SCFM @ 60 psi supply maximum (.31 SCFM with I/P module). Standard on 200 square-inch actuators and above, optional on others. Pneumatic models are available with Fluorosilicone diaphragms and O-rings, cleaned and assembled in a clean room.
Flowserve Corporation, Valtek Control Products, Tel. USA 801 489 8611
Field-reversible Signal
Coalescing Filter
A frequently encountered problem with most manufacturers transducers is clogging in the air passageways. The NT 3000 module avoids this problem with its integral, field-replaceable coalescing filter that ensures a long-life and trouble-free operation. In addition to the dirt particles captured by traditional air filters, the NT 3000 coalescing filter traps oils and moisture from the supply air.
Flowserve Corporation, Valtek Control Products, Tel. USA 801 489 8611
Regulator Filter I/P MODULE Zero Adjustment Lock Knob Feedback Spring MODULE 3-15 psi Signal To Signal Signal 3-15 psi Instrument Signal Capsule PNEUMATIC MODULE Pilot Valve Body Pilot Valve Spool Follower Arm
-R
Take-off Arm
Balance Beam
Flowserve Corporation, Valtek Control Products, Tel. USA 801 489 8611
Net weight
3 lbs.
5.3 volts + 5 ohms (270 ohms at 20 mA) Intrinsically safe: Class I, Division 1, Groups A, B, C, D; Class II, Groups E, F, G Explosion-proof: Class I, Division 1, Groups B, C, D; Class II, Groups E, F, G Non-incendive: Class I, Division 2, Groups A, B, C, D, F, G 5.5 lbs. Pneumatic Module +1.0% F.S. 0.5% F.S. 0.2% F.S. 0.2% F.S. 0.3% F.S. .1% F.S. .25 SCFM .05 % F.S. 300:1 psi/psi @60 psi 11 SCFM .8 Hz -71O 2.3 in/sec. 1.3 in/sec. NT 3000 Module +1.0% F.S. 0.5% F.S. 0.2% F.S. 0.2% F.S. 0.3% F.S. .1% F.S. .31 SCFM .06% F.S. 400:1 psi/mA @60 psi 11 SCFM .8 Hz -71.1O 2.3 in/sec. 1.3 in./sec.
*Data is based on tests of the Beta positioner mounted on a double-acting cylinder actuator having a piston area of 25 square inches with a valve stroke of 1.5 inches and 60 psi supply pressure. Instrument signal was 3-15 psi with pneumatic module and 4-20 mA with I/P module.
Flowserve Corporation, Valtek Control Products, Tel. USA 801 489 8611
.39 10
.39 10
.57 14
Front View
Back View
3.64 92
.67 17
45 22.5
.10 3
2.42 61
Side View
Top View
Flowserve Corporation, Valtek Control Products, Tel. USA 801 489 8611
.67 17
45 22.5
Top View
Side View
2.17 55
3.91 99 .39 10
.39 10
1.97 50
1.00 25
.50 12.7
Front View
Back View
Flowserve Corporation has established industry leadership in the design and manufacture of its products. When properly selected, this Flowserve product is designed to perform its intended function safely during its useful life. However, the purchaser or user of Flowserve products should be aware that Flowserve products might be used in numerous applications under a wide variety of industrial service conditions. Although Flowserve can (and often does) provide general guidelines, it cannot provide specific data and warnings for all possible applications. The purchaser/user must therefore assume the ultimate responsibility for the proper sizing and selection, installation, operation and maintenance of Flowserve products. The purchaser/user should read and understand the Installation Operation Maintenance (IOM) instructions included with the product, and train its employees and contractors in the safe use of Flowserve products in connection with the specific application. While the information and specifications presented in this literature are believed to be accurate, they are supplied for informative purposes only and should not be considered certified or as a guarantee of satisfactory results by reliance thereon. Nothing contained herein is to be construed as a warranty or guarantee, express or implied, regarding any matter with respect to this product. Because Flowserve is continually improving and upgrading its product design, the specifications, dimensions and information contained herein are subject to change without notice. Should any question arise concerning these provisions, the purchaser/user should contact Flowserve Corporation at any of its worldwide operations or offices. For more information, contact: For more information about Flowserve, contact www.flowserve.com or call USA 972 443 6500 Regional Headquarters 1350 N. Mt. Springs Prkwy. Springville, UT 84663 Phone 801 489 8611 Facsimile 801 489 3719 12 Tuas Avenue 20 Republic of Signapore 638824 Phone (65) 862 3332 Facsimile (65) 862 4940 Flowserve and Valtek are registered trademarks of Flowserve Corporation. 12, av. du Qubec, B.P. 645 91965, Courtaboeuf Cedex, France Phone (33 1) 60 92 32 51 Facsimile (33 1) 60 92 32 99 Quick Response Centers 5114 Railroad Street Deer Park, TX 77536 USA Phone 281 479 9500 Facsimile 281 479 8511 104 Chelsea Parkway Boothwyn, PA 19061 USA Phone 610 497 8600 Facsimile 610 497 6680 1300 Parkway View Drive Pittsburgh, PA 15205 USA Phone 412 787 8803 Facsimile 412 787 1944
8 FCD VLATB024-09
Flowserve Corporation, Valtek Control Products, Tel. USA 801 489 8611 2000 Flowserve Corporation. Flowserve Corporation, Valtek Control Products, Tel. USA 801 489 8611