Anda di halaman 1dari 36

R E L AY SELECTION GUIDE

A m e r i c a n Z e t t l e r, I n c .

Revised 7/24/06

Relay Selection Guide


0.61 0.40 0.43 0.84 0.64 1.38 0.58 1.23 0.85 1.10 0.94 0.74

SERIES
FEATURES

AZ5
High sensitivity Subminiature size Low cost Meets FCC Part 68.302 and 68.304

AZ8
High sensitivity (110 mW) Class B (130C) insulation standard Class F (155C) insulation available VDE versions available Hermetically sealed versions available Yes 1 Form A, C Light duty: 2 A at 28 VDC or 300 VAC Medium duty: 6 A at 28 VDC or 300 VAC Heavy duty: 10 A at 24 VDC or 250 VAC

AZ164AZ166
High Switching Capacity AC and DC coils Three different mounting options Push To Test lever available on some models CE marked Yes 1 4 Form C 3PDT, 4PDT: 5 A at 30 VDC/250 VAC DPDT Standard Duty: 7 A at 30 VDC/250 VAC DPDT Heavy Duty: 10 A at 30 VDC/ 250 VAC SPDT Heavy Duty: 15 A at 30 VDC/250 VAC 5 thru 110 VDC 6 thru 240 VAC DC: 6 to 48 VDC: 576 mW 110 VDC: 704 mW AC: 0.768 VA Contact to coil: 1500 Vrms Between open contacts: 1000 Vrms Contact Set to Contact Set: 1000 Vrms 1 x 105 operations

AZ420
Versatile contact configurations Wide switching range High sensitivity Long life

EPOXY SEALED Form

Yes 1 Form C Light duty: 1 A at 30 VDC 0.5 A at 120 VAC Heavy duty: 2 A at 30 VDC 1 A at 120 VAC

Yes 1 6 Form C 2 A at 26 VDC or 115 VAC 3 A at 28 VDC or 115 VAC 7.5 A at 28 VDC or 115 VAC 5 A at 30 VDC or 120 VAC 3 thru 115 VDC

CONTACTS

Ratings (Resistive)

COIL VOLTAGES COIL POWER AT PICKUP VOLTAGE (typical)

5 thru 24 VDC

5 thru 48 VDC

Standard coils: 220 mW Sensitive coils: 100 mW

Standard coils: 210 mW Sensitive coils: 140 mW (110 mW available) Contact to coil: 3000 Vrms Hermetically sealed: 1600 Vrms Between open contacts: 750 Vrms Light Duty: 3 x 105 at 3 A at 120 VAC Medium Duty: 1.8 x 105 at 6 A at 120 VAC Heavy Duty: 1 x 105 at 10 A at 120 VAC 1 x 108 operations

Standard coils: 450 to 850 mW Sensitive coils: 40 mW per pole (25 mW per pole available) Contact to coil: 1500 Vrms Between open contacts: 1000 Vrms Contact Set to Contact Set: 1000 Vrms 1 x 108 at 10 mA at 6 VDC 1.5 x 106 at 2 A at 28 VDC or 115 VAC 2 x 105 at 5 A at 28 VDC or 115 VAC 1 x 105 at 7.5 A at 28 VDC or 115 VAC 5 x 108 operations

DIELECTRIC STRENGTH (at sea level for 1 min.)

Contact to coil: 1250 Vrms Between open contacts: 500 Vrms

Electrical TYPICAL LIFE


At rated load unless otherwise specified

Standard duty: 5 x 105 at 1 A at 30 VDC or 4 x 105 at 0.5 A at 120 VAC Heavy duty: 2 x 105 at 2 A at 30 VDC or 2 x 105 at 1 A at 120 VAC 1 x 107 operations

Mechanical APPROXIMATE SIZE IN INCHES L XW X H

2 x 107 operations

0.61 x 0.40 x 0.43

0.84 x 0.64 x 0.58

1.10 x 0.85 x 1.38

2 pole: 0.94 x 0.74 x 1.23 4 pole: 1.17 x 0.74 x 1.23 6 pole: 1.40 x 0.74 x 1.23 THT X X UL/CUR

TERMINALS

PC Solder/Plug-in Bracket Mount Socket

THT UL/CSA

THT UL/CUR/VDE

THT X X X UL/CUR

APPROVAL

Relay Selection Guide


0.97 0.99 0.41 1.14 0.51 1.0 1.14 0.51 1.02 1.14 0.51 1.02 0.95 0.47 0.98

AZ673
High dielectric strength, 4000 Vrms Withstands surges up to 10,000 volts High switching capacity in slim package

AZ697
High dielectric strength, 5000 Vrms High switching capacity Class B (130C) insulation standard Isolation spacing greater than 8 mm Yes 1 Form A, C TV5 at 120 VAC 10A at 277 VAC or 30 VDC resistive 1/ 3 HP at 250 VAC
1/ 4

AZ733
High switching capacity High dielectric strength, 5000 Vrms Isolation spacing greater than 8 mm Class B (130C) insulation standard Yes 2 Form A, C 10 A at 30 VDC or 250 VAC TV-3 at 125 VAC 1/ 4 HP at 240 VAC
1/ 8

AZ733W
1.5 mm contact gap High switching capacity High dielectric strength, 5000 Vrms Isolation spacing greater than 8 mm Class B (130C) insulation standard Yes 2 Form A 10 A at 250 VAC 10 A at 30 VDC TV-3 at 125 VAC

AZ734
Dielectric strength, 4000 Vrms 5 Amp switching, double pole contacts Class B (130C) insulation standard

Yes 1 Form A, C 10 A at 250 VAC 10 A at 30 VDC HP at 125 VAC HP at 250 VAC TV-5 at 125 VAC

Yes 2 Form A 5 A at 250 VAC 5 A at 30 VDC TV-3 at 125 VAC

1/ 8 1/ 4

HP at 125 VAC NO

HP at 120 VAC

5 thru 48 VDC

3 thru 110 VDC

3 thru 110 VDC

3 thru 60 VDC

5 thru 48 VDC

Standard coils: 300 mW Sensitive coils: 140 mW

257 mW

257 mW

450 mW

300 mW

Contact to coil: 4000 Vrms Between open contacts: 1000 Vrms Surge contact to coil: 10,000 V 1 x 105 at 10 A at 240 VAC

Contact to coil: 5000 Vrms Between open contacts: 1000 Vrms

Contact to coil: 5000 Vrms Between open contacts: 1000 Vrms Contact set to contact set: 3000 Vrms 1 x 105 at 10 A at 240 VAC

Contact to coil: 5000 Vrms Between open contacts: 3000 Vrms Contact set to contact set: 3000 Vrms 1 x 105 at 10 A at 240 VAC

Contact to coil: 4000 Vrms Between open contacts: 1000 Vrms Contact set to contact set: 1000 Vrms 1 x 105 at 5 A at 240 VAC

1 x 105 at 10 A at 240 VAC

1 x 107 operations

1 x 107 operations

1 x 107 operations

5 x 105 operations

1 x 107 operations

0.97 x 0.41 x 0.99

1.14 x 0.51 x 1.0

1.14 x 0.51 x 1.02

1.14 x 0.51 x 1.02

0.95 x 0.47 x 0.98

THT UL/CUR/TV

THT X UL/CUR/TV

THT X UL/CUR/TV

THT X UL/CUR/TV

THT UL/CUR

Relay Selection Guide


1.14 1.14 0.50 0.62 1.14 0.50 0.62 0.51 1.06 0.50 0.95 1.14

SERIES
FEATURES

AZ742
High dielectric strength, 5000 Vrms AC and DC coils Isolation spacing greater than 10 mm Proof tracking index (PTI/CTI) 250 Surpasses requirements of VDE 0631/0700 Yes 2 Form A, C 8 A at 250 VAC

AZ743
High dielectric strength, 5000 Vrms AC and DC coils Isolation spacing greater than 10 mm Class B (130C) insulation standard Class F (155C) available Yes 2 Form A, B, C 10 A at 250 VAC 8 A at 277 VAC 1/ 2 HP at 250 VAC
1/ 4

AZ755
High switching capacity High dielectric strength, 5000 Vrms Isolation greater than 8 mm Class B (130C) insulation standard Class F (155C) available Yes 1 Form A, B, C 20 A at 277 VAC (N.O.) 16 A at 240 VAC 12 A at 277 VAC 1 HP at 240 VAC TV8 at 120 VAC 20 A at 24 VDC

AZ756
High dielectric strength, 5000 Vrms Isolation spacing greater than 8 mm Class B (130C) insulation standard Class F (155C) available No 1 Form A 16 A at 250 VAC 20 A at 125 VAC 16 A at 30 VDC

EPOXY SEALED Form

CONTACTS

Ratings (Resistive)

HP at 125 VAC

COIL VOLTAGES COIL POWER AT PICKUP VOLTAGE (typical)

3 thru 110 VDC 12 thru 240 VAC DC coil: 200 mW AC coil: 0.422 VA

5 thru 110 VDC 24 thru 230 VAC

3 thru 110 VDC

5 thru 48 VDC

190 mW

270 mW

340 mW

DIELECTRIC STRENGTH (at sea level for 1 min.)

Contact to coil: 5000 Vrms Between open contacts: 1000 Vrms Contact set to contact set: 2500 Vrms 1 x 105 at 8 A at 240 VAC

Contact to coil: 5000 Vrms Between open contacts: 1000 Vrms Contact set to contact set: 3000 Vrms 1 x 105 at 8 A at 240 VAC

Contact to coil: 5000 Vrms Between open contacts: 1000 Vrms

Contact to coil: 5000 Vrms Between open contacts: 1000 Vrms

Electrical TYPICAL LIFE


At rated load unless otherwise specified

5 x 104 at 16 A at 240 VAC 2 x 104 at 20 A at 277 VAC

1 x 105 at 16 A at 240 VAC

Mechanical APPROXIMATE SIZE IN INCHES L XW X H

3 x 107 operations

1 x 107 operations

5 x 106 operations

1 x 107 operations

1.14 x 0.50 x 0.62

1.14 x 0.50 x 0.62

1.14 x 0.51 x 1.06

1.14 x 0.50 x 0.95

TERMINALS

PC Solder/Plug-in Bracket Mount Socket

THT X UL/CUR/VDE

THT X UL/CUR/VDE

THT X UL/CUR/TV

THT Quick connect UL/CUR/TV

APPROVAL

Relay Selection Guide


NEW

0.91 0.49 0.98

0.73

1.22 0.50 1.20 0.62 1.14 0.52 1.16 0.64 0.63 1.24 0.59

AZ757
20 Amp switching 10 kV surge Class F (155C) insulation standard UL, CUR file E44211

AZ760
20 Amp switching High in-rush capacity Quick-connects for contacts Class B (130C) insulation standard

AZ761
High dielectric strength, 5000 Vrms AC and DC coils Isolation spacing greater than 10 mm Class B (130C) insulation standard Class F (155C) available Yes 1 Form A, B, C Standard 12 A at 277 VAC Sensitive 10 A at 250 VAC 1/ 2 HP at 250 VAC 1/ 3 HP at 125 VAC B300 Pilot Duty R300 Pilot Duty 5 thru 110 VDC 24 thru 230 VAC Standard: 196 mW Sensitive: 141 mW

AZ762
High dielectric strength, 5000 Vrms AC and DC coils Isolation spacing greater than 10 mm Class B (130C) insulation standard Class F (155C) available Yes 1 Form A, B ,C 16 A at 277 VAC 1 HP at 250 VAC 1/ 2 HP at 125 VAC TV-5 at 125 VAC (1 Form A) B300 Pilot Duty R300 Pilot Duty 5 thru 110 VDC 24 thru 230 VAC 196 mW

AZ762F
High temperature operation 125C Dielectric strength 5000 Vrms Class F (155C) standard 20 Amp switching Low profile Quick connects (0.618)

Yes 1 Form A 20 A at 250 VAC 16 A at 30 VDC 1.5 HP at 250 VAC

No 1 Form A 20 A at 220 VAC 1.5 HP at 250 VAC

Yes 1 Form A, B 20 18 16 12 A A A A at at at at 277 VAC 250 VAC 250 VAC 400 VAC

5 thru 24 VDC

6 thru 48 VDC

5 thru 60 VDC

245 mW

441 mW

196mW

Contact to coil: 5000 Vrms Between open contacts: 1000 Vrms

Contact to coil: 2000 Vrms Between open contacts: 1000 Vrms

Contact to coil: 5000 Vrms Between open contacts: 1000 Vrms

Contact to coil: 5000 Vrms Between open contacts: 1000 Vrms

Contact to coil: 5000 Vrms Between open contacts: 1000 Vrms

1 x 105 at 20 A at 250 VAC

1 x 105 at 20 A at 220 VAC

1 x 105 at 12 A at 240 VAC

1 x 105 at 16 A at 240 VAC

1 x 105 at 20 A at 277 VAC

1 x 107 operations

1 x 107 operations

1 x 107 operations

1 x 107 operations

1 x 107 operations 1.24 x 0.59 x 0.63

0.91 x 0.49 x 0.98

1.22 x 0.73 x 1.20

1.14 x 0.50 x 0.62

1.16 x 0.52 x 0.64

THT Quick connect UL/CUR

THT Quick connect UL/CUR

THT X UL/CUR/VDE

THT X UL/CUR/VDE

THT UL/CUR/VDE

Relay Selection Guide


1.14 1.14 0.50 0.62 0.62 0.50 0.72 0.40 0.59 0.41 0.72 0.60

SERIES
FEATURES

AZ763
High dielectric strength, 5000 Vrms AC and DC coils Isolation spacing greater than 10 mm Proof tracking index (PTI/CTI) 250 Surpasses requirements of VDE 0631/0700 Yes 1 Form A, C 12 A at 250 VAC

AZ764
High dielectric strength, 5000 Vrms AC and DC coils Isolation spacing greater than 10 mm Proof tracking index (PTI/CTI) 250 Surpasses requirements of VDE 0631/0700 Yes 1 Form A, C 16 A at 250 VAC

AZ765
Small footprint Low cost 10 Amp switching capacity

AZ766
Low seated height Low cost Class B (130C) insulation standard 13.5 Amp switching capacity

EPOXY SEALED Form

Yes 1 Form A, C 10 A at 120 VAC 10 A at 28 VDC

Yes 1 Form A 13.5 A at 125 VAC 10 A at 30 VDC or 277 VAC 12 A at 125 VAC TV5 at 120 VAC 1/ 4 HP at 125 / 250 VAC

CONTACTS

Ratings (Resistive)

COIL VOLTAGES COIL POWER AT PICKUP VOLTAGE (typical)

DC coils: 3 thru 110 VDC AC coils: 12 thru 240 VAC DC coils: 200 mW AC coils: 0.422 VA

DC coils: 3 thru 110 VDC AC coils: 12 thru 240 VAC DC coils: 200 mW AC coils: 0.422 VA

3 thru 24 VDC

3 thru 24 VDC

253 mW

253 mW

DIELECTRIC STRENGTH (at sea level for 1 min.)

Contact to coil: 5000 Vrms Between open contacts: 1000 Vrms

Contact to coil: 5000 Vrms Between open contacts: 1000 Vrms

Contact to coil: 2500 Vrms Between open contacts: 1000 Vrms

Contact to coil: 2500 Vrms Between open contacts: 1000 Vrms

Electrical TYPICAL LIFE


At rated load unless otherwise specified

1 x 105 at 12 A at 240 VAC

1 x 105 at 16 A at 240 VAC

1 x 105 at 10 A at 120 VAC

1 x 105 at 12 A at 125 VAC

Mechanical APPROXIMATE SIZE IN INCHES L XW X H

3 x 107 operations

3 x 107 operations

1 x 107 operations

1 x 107 operations 0.72 x 0.60 x 0.41

1.14 x 0.50 x 0.62

1.14 x 0.50 x 0.62

0.72 x 0.40 x 0.59

TERMINALS

PC Solder/Plug-in Bracket Mount Socket

THT X UL/CUR/VDE

THT X UL/CUR/VDE

THT UL/CUR

THT UL/CUR

APPROVAL

Relay Selection Guide


0.74 0.42 0.61 1.20 1.20 0.63 1.04 0.41 0.49 0.70 1.39 0.39 0.39 0.80 0.39 0.42

0.93

AZ767
Small footprint Low cost Class B (130C) insulation standard 10 Amp switching capacity

AZ769
25 Amp switching 80 Amp inrush current Quick connect and PCB terminals Flux tight construction Class B (130C) insulation standard 10 kV surge No 1 Form A 25 A at 277 VAC 1 HP at 120 VAC 2 HP at 240 VAC

AZ770
Small footprint 5 kV dielectric strength, 10 kV surge Class B (130C) insulation standard 8 mm creepage and clearance

AZ830-4P/AZ830P-4P
4 Pole single side stable and two coil bistable (latching version) Meets FCC Part 68.302 & 68.304 Bifurcated contacts Low profile DIP package High sensitivity (100 MW) Yes 4 Form C 1 A at 30 VDC 0.5 A at 120 VAC

AZ832/AZ832P
Low profile for compact board spacing DC coils to 48 VDC Single and dual coil latching versions Meets FCC Part 68.302 & 304 High switching capacity, 60 W, 250 VA Yes 2 Form C 2 A at 30 VDC 2 A at 125 VAC

Yes 1 Form A, C 1 Form A: 5 A at 30 VDC/250 VAC 10 A at 125 VAC 10 A LRA/1.5 A FLA at 120 VAC 1 Form C: 3 A at 30 VDC or 250 VAC 3 thru 48 VDC

Yes 1 Form A, C 1 Form A (N.O.): 5 A at 250 VAC 5 A 30 VDC 1/ 8 HP, 125 / 250 VAC 3 A at 250 VAC, 0.4 PF 1 Form C: 3 A at 250 VAC 3 A at 30 VDC

5 thru 48 VDC

3 thru 48 VDC

5 thru 48 VDC

AZ832: 3 thru 48 VDC AZ832P: 2.25 thru 24 VDC AZ832: 96 mW AZ832P: 128 mW

Standard: 253 mW Sensitive: 113 mW

441 mW

Standard: 253 mW Sensitive: 113 mW

Standard coil: 200 mW (single side stable) Standard coil: 180 mW (bistable) Sensitive coil: 100 mW (single side stable Sensitive coil: 90 mW (bistable) Contact to coil: 1500 Vrms Between open contacts: 1000 Vrms Contact set to contact set: 1500 Vrms

Contact to coil: 2500 Vrms Between open contacts: 1000 Vrms

Contact to coil: 4500 Vrms Between open contacts: 1500 Vrms Contact to coil surge: 10,000 V 1 x 105 at 25 A at 277 VAC

Contact to coil: 5000 Vrms Between open contacts: 1000 Vrms

Contact to coil: 1500 Vrms Between open contacts: 1000 Vrms Contact set to contact set: 1000 Vrms 1 x 105 at 2 A at 30 VDC or 1 A at 125 VAC 2 x 106 at 1 A 30 VDC or 0.5 A at 125 VAC

1 x 105 at 5 A at 240 VAC

1 x 105 at 5 A at 240 VAC

5 x 105 at 2 A at 30 VDC 2 x 105 at 0.5 A at 120 VAC

1 x 107 operations 0.74 x 0.42 x 0.61

2 x 106 operations QC: 1.20 x 0.63 x 0.93 PCB: 1.20 x 0.63 x 1.04

1 x 106 operations 0.70 x 0.41 x 0.49

1 x 108 operations

2 x 107 operations 0.80 X 0.39 X 0.42

1.39 x 0.39 x 0.39

THT UL/CUR

THT Quick connect UL/CUR/TV

THT UL/CUR/VDE

THT UL/CSA

THT UL/CUR

Relay Selection Guide


0.55 0.35 0.20 0.28 0.21 0.42 0.79 0.43 0.49 0.80 0.21 0.50

SERIES
FEATURES

AZ850/AZ851
Bistable (latching) versions available Microminiature size Meets FCC Part 68.302 High sensitivity (79 mW) Stable contact resistance for low level signal switching All plastics meet UL94 V-0, 30 min. oxygen index Yes 2 Form C 1 A at 30 VDC 0.5 A at 125 VAC

AZ852/AZ853
Microminiature size Meets FCC Part 68.302 High sensitivity (79 mW) Stable contact resistance for low level signal switching All plastics meet UL94 V-0, 30 min. oxygen index Bistable (latching) versions available Yes 2 Form C 2.0 A at 30 VDC 0.5 A at 125 VAC 0.3 A at 110 VDC

AZ881
Dielectric Strength 3000 Vrms 8 Amp switching Class B (130C) insulation standard Class F (155C) insulation available Single & Dual coil latching versions available Yes 1 Form A, B 2 Form A Form A: 8 A at 250 VAC 5 A at 30 VDC Form C: 5 A at 250 VAC 5 A 30 VDC

AZ920
Slim SIP package High sensitivity (58 mW) Class B (130C) insulation standard Class F (155C) available Up to 5 Amp switching in a compact size Yes 1 Form A 5 A at 30 VDC or 250 VAC

EPOXY SEALED Form

CONTACTS

Ratings (Resistive)

COIL VOLTAGES COIL POWER AT PICKUP VOLTAGE (typical)

3 thru 48 VDC

1.5 thru 24 VDC

3 thru 24 VDC

5 thru 24 VDC

Single Side Stable: 79-169 mW Bistable (latching) Single Coil: 56-84 mW Bistable (latching) Two Coil:113-169mW Contact to coil: 1000 Vrms Between open contacts: 1000 Vrms Contact set to contact set: 1000 Vrms 1 x 105 at 0.5 A at 125 VAC 2 x 105 at 1.0 A at 30 VDC

79 mW (3-12 VDC) 130 mW (24 VDC)

192 mW

5-18 Volt coils: 58 mW 24 Volt coils: 88 mW

DIELECTRIC STRENGTH (at sea level for 1 min.)

Contact to coil: 1500 Vrms Between open contacts: 1000 Vrms Contact set to contact set: 1000 Vrms 1 x 105 at 0.5 A at 125 VDC 2 x 105 at 1.0 A at 30 VDC

Contact to coil: 3000 Vrms Between open contacts: 1000 Vrms Contact set to contact set: 2000 Vrms 1 x 105 at 8 A at 250 VDC

Contact to coil: 2500 Vrms Between open contacts: 1000 Vrms

Electrical TYPICAL LIFE


At rated load unless otherwise specified

1 x 105 at 5 A, 30 VDC Res.

Mechanical APPROXIMATE SIZE IN INCHES L XW X H

1 x 108 operations AZ850: 0.55 x 0.35 x 0.20 AZ851: 0.56 x 0.37 x 0.24

1 x 108 operations AZ852: 0.42 x 0.28 x 0.21 AZ853: 0.42 x 0.35 x 0.22

1 x 107 operations 0.79 x 0.43 x 0.49

2 x 107 operations

0.80 x 0.21 x 0.50

TERMINALS

PC Solder/Plug-in Bracket Mount Socket

THT/SMT UL/CUR

THT/SMT UL/CSA

THT UL/CUR

THT UL/CUR/TV

APPROVAL

Relay Selection Guide


0.70 0.38 0.53 0.83 0.91 0.89 0.81 0.89 0.28 0.60 0.62 0.81 0.61 0.66 0.65

AZ934
Two separate relays in one package Quiet operation Vibration and shock resistant Up to 20 Amp switching in a compact size ISO/TS 16949, ISO14000 Yes 1 Form C 2X 1 Form C 25 A / 20 A Make/Break 1 Form C: 20 A at 14 VDC 2X 1 Form C: 20 A at 14 VDC

AZ935
Two separate relays in one package Extremely quiet operation Vibration and shock resistant Up to 20 Amp switching in a compact size ISO/TS 16949, ISO14000 Yes 2X 1 Form C 25 A / 20 A Make/Break 2X 1 Form C: 25 A at 20 VDC

AZ939
Extremely small footprint 3 Amp switching in miniature size High dielectric strength, 4000 Vrms High sensitivity (113 mW)

AZ940
High switching capacity, 10 Amps 4 kV dielectric strength SPST and SPDT versions available High sensitivity (113 mW)

AZ942
High switching capacity Extremely low cost Class B (130C) insulation standard Class F (155C) available High dielectric strength

Yes 1 Form A 3 A at 250 VAC 3 A at 30 VDC 1/ 10 HP at 250 VAC

Yes 1 Form A,C Form A 10 A at 277 VAC 5 A at 30 VDC Form C 3 A at 30 VDC / 250 VAC

Yes 1 Form A, C 16 A at 250 VAC 12 A at 28 VDC or 277 VAC 1/ 3 HP at 125 VAC 2 A at 240 VAC Pilot Duty

12 VDC

12 VDC

4.5 thru 24 VDC

3 thru 24 VDC

3 thru 48 VDC

203 mW

203 mW

113 mW

Standard: 253 mW Sensitive: 113 mW

230 mW

Contact to coil: 500 Vrms Between open contacts: 500 Vrms

Contact to coil: 500 Vrms Between open contacts: 500 Vrms

Contact to coil: 4000 Vrms Between open contacts: 750 Vrms

Contact to coil: 4000 Vrms Between open contacts: 1000 Vrms

Contact to coil: 1750 Vrms Between open contacts: 1000 Vrms

2 x 105 at 20 A, 14 VDC Res.

2 x 105 at 20 A at 14 VDC

1 x 105 at 3 A at 30 VDC or 250 VAC

1 x 105 at 10 A at 120 VAC

1 x 105 at 10 A at 277 VAC

1 x 107 operations

1 x 107 operations

5 x 106 operations

1 x 107 operations

1 x 107 operations

1 Form C: 0.70x 0.38 x 0.53 2 Form C: 0.70x 0.67x 0.53 THT

0.89 x 0.91 x 0.83

0.81x 0.28 x 0.60

0.81 x 0.42 x 0.62

0.89 x 0.65 x 0.66

THT

THT UL/CUR

THT UL/CUR/VDE

THT UL/CUR

Relay Selection Guide


NEW

0.89 0.66 0.65 0.65

0.87 0.64 0.62

0.75

0.61

0.62

0.76 0.61

SERIES
FEATURES

AZ942A
High switching capacity, 20 Amps Extremely cost effective DC coils to 24 VDC For automotive use Class F (155C) standard QS9000, ISO9001, ISO14001 SAE J2544 tested Yes 1 Form A, C 20 A at 14 VDC

AZ942H
Extremely low cost High switching capacity Class B (130C) insulation standard Class F (155C) available DC coils to 48 VDC Meets IEEE 587 6 kV lightning surge Yes 1 Form A, C Form A 10 A at 28 VDC 10 A at 277 VAC Form C 7 A at 28 VDC 12 A at 125 VAC

AZ943
Low seated height Low cost TV-5 rating Class B (130C) insulation standard Class F (155C) available Surface Mount available Yes 1 Form A, C

AZ943H
High performance Low seated height 6 kV surge withstand Flux tight and sealed versions available Class B insulation (130 C) standard, Class F (155C) available UL, CUR file E43203 Yes 1 Form A, C

EPOXY SEALED Form

CONTACTS

Ratings (Resistive)

Form A 15 A at 125 VAC 10 A at 277 VAC TV-5 120 VAC 1/ 2 HP at 125 VAC Form C 10 A at 277 VAC 1/ 2 HP at 125 VAC 125 VA at 120 VAC Pilot Duty 5 thru 48 VDC

10 A at 120VAC 10 A at 24 VDC 10 A at 250 VAC 15 A at 120 VAC 15 A at 24 VDC

COIL VOLTAGES COIL POWER AT PICKUP VOLTAGE (typical)

6 thru 24 VDC

3 thru 48 VDC

5 thru 48 203 mW

220 mW

230 mW

203 mW

DIELECTRIC STRENGTH (at sea level for 1 min.)

Contact to coil: 1500 Vrms Between open contacts: 1000 Vrms

Contact to coil: 3000 Vrms Between open contacts: 1000 Vrms Contact to Coil Surge: 6 kV 1 x 105 at 10 A at 277 VAC

Contact to coil: 1500 Vrms Between open contacts: 1000 Vrm 1 x 105 at 10 A at 277 VAC

Contact to coil: 3000 Vrms Between open contacts: 1000 Vrms

Electrical TYPICAL LIFE


At rated load unless otherwise specified

1 x 105 at 20 A at 14 VDC

1 x 105 at 10 A 120 VAC

Mechanical APPROXIMATE SIZE IN INCHES L XW X H

1 x 107 operations

1 x 107 operations

1 x 107 operations 0.75 x 0.61 x 0.62

1 x 106 operations 0.76 x 0.62 x 0.61

0.89 x 0.65 x 0.66

0.87 x 0.64 x 0.65

TERMINALS

PC Solder/Plug-in Bracket Mount Socket

THT

THT UL/CUR

THT UL/CUR/TV

THT UL/CUR

APPROVAL

10

Relay Selection Guide


NEW

0.76 0.61 0.62 0.65

0.85

0.62 0.63

0.42 0.47

0.30

0.49 0.39

0.81

0.41 0.81

AZ943S
High Performance Low seated height Flux tight version Class B insulation (130C) Class F insulation (155C) UL, CUR file E43203

AZ946
Subminiature size Coils up to 48 VDC Extremely low cost

AZ954
Subminiature size for high density packaging High sensitivity (114 mW) Coils to 24 VDC Extremely low cost 5 or 6 pin PC layout Class B (130C) and Class F (155C) available Yes 1 Form C 2 A at 125 VAC 1 A at 30 VDC

AZ957
Subminiature size Designed for compact high density mounting High sensitivity (96 mW) Meets FCC Part 68.302 & 68.304

AZ961
Subminiature size Designed for compact high density mounting High sensitivity (129 mW) Withstands 4 kV surge Class B (130C) insulation standard

Yes 1 Form A, C

Yes 2 Form C 6 A at 30 VDC 5 A at 277 VAC 6 A at 125 VAC

Yes 1 Form C 1 A at 30 VDC 0.5 A at 125 VAC 0.3 A at 60 VDC

Yes 1 Form A, C Form A 5 A at 250 VAC 3 A at 30 VDC Form C 5 A/3 A at 250 VAC 5 A/3 A at 30 VDC

Form A 15 A at 125 VAC 10 A at 277 VAC TV-5 120 VAC 125 VA at 120 VAC Form C 10 A at 277 VAC 1/2 HP at 125 VAC 125 VA at 120 VAC 5 thru 48 203 mW

3 thru 48 VDC

3 thru 24 VDC

1.5 thru 24 VDC

3 thru 48 VDC

384 mW

Standard: 114 mW

Standard: 128 mW Sensitive: 96 mW

Standard: 176 mW Sensitive: 129 mW

Contact to coil: 1500 Vrms Between open contacts: 1000 Vrms

Contact to coil: 1000 Vrms Between open contacts: 750 Vrms Contact set to contact set: 1000 Vrms 1 x 105 at 5 A at 277 VAC

Contact to coil: 1250 Vrms Between open contacts: 750 Vrms

Contact to coil: 1250 Vrms Between open contacts: 400 Vrms

Contact to coil: 2000 Vrms Between open contacts: 1000 Vrms Contact to coil surge: 4000 V 1 x 105 at 5 A at 240 VAC

1 x 105 at 10 A 277 VAC

1 x 105 at 2 A at 120 VAC

1 x 105 at 0.5A at 120 VAC

1 x 107 operations 0.76 x 0.62 x 0.61

2 x 107 operations 0.85 x 0.63 x 0.65

1 x 107 operations 0.62 x 0.42 x 0.47

1 x 107 operations 0.49 x 0.30 x 0.39

1 x 107 operations 0.81 x 0.41 x 0.81

SMT UL/CUR

THT UL/CUR

THT UL/CUR

THT UL/CUR

THT UL/CUR

11

Relay Selection Guide


1.03 1.03 0.93 1.00 1.00 0.63 1.00 0.71 0.63 0.60 0.91 0.70 0.78 1.02 0.61 1.62 1.32 0.98

SERIES
FEATURES

AZ973/AZ974
Mini-ISO 40 A contact rating Quick connect terminals Metal or plastic mounting bracket options Shrouded models Resistor or diode parallel to coil available ISO/TS 16949, ISO14000 SAE J2544 tested Yes 1 Form A, C

AZ975/AZ976
20 A switching in compact size Small footprint Open, covered or sealed Six different contact arrangements available Vibration and shock resistant ISO/TS 16949, ISO14000 SAE J2544 tested Yes 1 Form A, B, C, U, V, W Form A 20 A at 14 VDC 15 A at 13 VDC

AZ977
Up to 20 Amp switching capability Coils to 24 VDC Class F insulation system standard Vibration and shock resistant Cost effective

AZ979
80 Amp contact rating Super ISO High operating temperature (85C) Quick connect terminals QS 9000, ISO9001, ISO14000 Tested in accordance with SAEJ2544 Yes 1 Form A, B, C

EPOXY SEALED Form

No 1 Form A, C

CONTACTS

Ratings (Resistive)

Form A 40 A at 14 VDC Form C 40/30 A at 14 VDC

20 A at 14 VDC

Form A 80 A at 14 VDC Form B, C 60 A at 14 VDC

COIL VOLTAGES COIL POWER AT PICKUP VOLTAGE (typical)

6, 12, 24 VDC

6, 12, 24 VDC

6 thru 24 VDC

6 thru 24 VDC

680 mW

514 mW

Standard: 534 mW Sensitive: 421 mW

760 mW

DIELECTRIC STRENGTH (at sea level for 1 min.)

Contact to coil: 500 Vrms Between open contacts: 500 Vrms

Contact to coil: 500 Vrms Between open contacts: 500 Vrms

Contact to coil: 1000 VDC Between open contacts: 500 VDC

Contact to coil: 500 Vrms Between open contacts: 500 Vrms

Electrical TYPICAL LIFE


At rated load unless otherwise specified

1 x 105 at 40 A at 14 VDC

1 x 105 at 12 A at 14 VDC

1 x 105 at 20 A 14 at VAC

1 x 105 at 80 A 14 VDC

Mechanical APPROXMIATE SIZE IN INCHES L XW X H

1 x 107 operations AZ973: 1.03 x 1.03 x 0.93 AZ974: 1.00 x 1.00 x 1.00 THT Quick-Connects X X

1 x 107 operations AZ975: 0.52 x 0.63 x 0.71 AZ976: 0.70 x 0.60 x 0.78 THT

1 x 106 operations

1 x 107 operations

.906 x .610 x 1.02

1.173 x 1.315 x 1.614

TERMINALS

PC Solder/Plug-in Bracket Mount Socket

X X

X X X

APPROVAL

12

Relay Selection Guide


1.17 0.98 1.17 1.14 1.14 1.10 0.61 1.01 0.91 1.12 1.12 1.0 0.40 0.48 0.52

AZ980
80 Amp contact rating Super ISO High momentary carry current (500A) Quick connect terminals High operating temperature (85 C) Tested in accordance with SAEJ2544 Yes 1 Form A, B, C Form A 80 A at 14VDC Form B, C 60A at 14 VDC

AZ983
80 Amp contact rating High momentary current (500 A) High operating temperature (85 C) ISO/TS 16949, ISO14000 SAE J2544 tested

AZ984
280-ISO Up to 20 A switching in a compact size Small footprint Shroud model Vibration and shock resistant Designed for high in-rush applications (120 A) No 1 Form A, C Form A 20 A at 14 VDC Form C 20/10 A at 14 VDC

AZ986
280-ISO 40 Amp contact rating High operating temperature Quick connect terminals Vibration and shock resistant Shrouded weatherproof cover available Resistor or diode parallel to coil available Yes 1 Form A, C Form A 40 A at 14 VDC Form C 30 A at 14 VDC

AZ987
Up to 30 A switching in a compact size Cost effective Vibration and shock resistant Designed for high in-rush applications ISO/TS 16949, ISO14000 SAE J2544 tested Dual versions available Yes 1 Form A, C 2 Form A, C 30 A at 16 VDC

Yes 1 Form A, B, C Form A 80 A at 14 VDC Form B, C 60 A at 14 VDC

6 thru 24 VDC

6 thru 24 VDC

6, 12 and 24 VDC

6, 12 and 24 VDC

10, 12, and 24 VDC

760 mW

760 mW

534 mW

580 mW

187 mW

Contact to coil: 500 Vrms Between open contacts: 500 Vrms

Contact to coil: 500 Vrms Between open contacts: 500 Vrms

Contact to coil: 500 Vrms Between open contacts: 500 Vrms

Contact to coil: 500 Vrms Between open contacts: 500 Vrms

Contact to coil: 500 VDC Between open contacts: 500 VDC

1 x 105 at 80 A 14 VDC

1 x 105 at 80 A at 14 VDC

1 x 105 at 20 A at 14 VDC

1 x 105 at 40 A at 14 VDC

3 x 105 at 20 A at 14 VDC

1 x 107 operations

1 x 107 operations

1 x 106 operations

1 x 107 operations

1 x 106 operations

1.17 x 1.17 x 0.98

1.14 x 1.14 x 1.10

0.91 x 0.61 x 1.01

1.12 x 1.12 x 1.0

0.48 x 0.52 x 0.40

Quick Connect X

THT

THT

X X

THT

13

Relay Selection Guide


NEW

0.61 0.99

0.91

0.56 0.54

0.29

0.57

1.27 0.62 0.55 1.09 1.10 0.62

1.20 0.97

SERIES
FEATURES

AZ988
Micro-ISO Up to 30 A Switching in a compact size Cost effective Vibration and shock resistant Designed for high in-rush applications ISO/TS 16949, ISO14000 SAE J2544 tested Dual versions available Yes 1 Form A, C Form A 30 A at 12 VDC Form C 20 A (N.O.)/10 A (N.C.) at 12 VDC

AZ989
Up to 25 A Switching in a compact size Cost effective Single and dual (twin) relay Vibration and shock resistant Epoxy sealed for automatic wave soldering ISO/TS 16949, ISO14000 SAE J2544 tested Yes 1 Form C 2 Form C 25 A at 16 VDC Locked Motor

AZ2100
Low cost per switched watt UL 873 spacing Class B (130C) insulation standard Class F (155C) insulation available 30 A Form C rating Coils to 110 VDC Yes 1 Form A, B, C 40 A at 250 VAC (N.O.) 30 A at 240 VAC 1 HP at 125 VAC 2 HP at 240 VAC

AZ2110/AZ2120
Low cost per switched watt UL 873 spacing Class B (130C) insulation standard Class F (155C) insulation available 30 A Form C rating Coils to 110 VDC No 1 Form A, B, C 40 A at 250 VAC (N.O.) 30 A at 240 VAC 1 HP at 125 VAC 2 HP at 240 VAC

EPOXY SEALED Form

CONTACTS

Ratings (Resistive)

COIL VOLTAGES COIL POWER AT PICKUP VOLTAGE (typical)

12 and 24 VDC

12 VDC

5 thru 110 VDC

5 thru 110 VDC

Standard: 576 mW Sensitive: 418 mW

230 mW

500 mW

500 mW

DIELECTRIC STRENGTH (at sea level for 1 min.)

Contact to coil: 500 VRMS Between open contacts: 500 VRMS

Contact to coil: 500 VAC Between open contacts: 500 VAC

Contact to coil: 2500 Vrms Between open contacts: 1500 Vrms

Contact to coil: 2500 Vrms Between open contacts: 1500 Vrms

Electrical TYPICAL LIFE


At rated load unless otherwise specified

1 x 105 at 20 A at 12 VDC

1 x 105 at 25 A at 14 VDC Locked Motor

1 x 105 at 30 A at 120 VAC

1 x 105 at 30 A at 120 VAC

Mechanical APPROXMIATE SIZE IN INCHES L XW X H

1 x 107 operations

1 x 106 operations

1 x 107 operations

1 x 107 operations

0.91 x 0.61 x 0.99

0.56 x 0.29 x 0 .54 0.56 x 0.56 x 0.54 (Dual)

1.27 x 1.09 x 1.10

1.20 x 0.97 x 0.62

TERMINALS

PC Solder/Plug-in Bracket Mount Socket

THT X

THT

THT

THT Quick-Connects - AZ2120

UL/CUR/VDE

UL/CUR/VDE

APPROVAL

14

Relay Selection Guide


1.25 1.06 0.75 1.09 1.10 1.27 1.08 1.28 1.08 1.08 1.98 0.75 1.22 1.89 0.75

AZ2150
Low cost per switched watt UL 873 spacing Class B (130C) insulation standard Class F (155C) insulation available 30 A Form C rating Coils to 110 VDC Yes 1 Form A, B, C 40 A at 250 VAC (N.O.) 30 A at 277 VAC 1 HP at 125 VAC 2 HP at 240 VAC

AZ2200
Quick connect leads for contacts AC and DC coils available Epoxy sealed versions available UL Class F (155 C) standard UL, CUR file E44211 Yes 1 Form A, B, C 30 A at 277 VAC 2 HP at 250 VAC 1 HP at 125 VAC 20/60 (FLA/LRA)at 277 VAC

AZ2270
Quick connect leads for contacts AC and DC coils available Coils to 277 VAC High dielectric strength versions available (4000 Vrms) Class F (155C) standard Yes 1 Form A, B, C Form A: 30 A at 277 VAC 2 HP at 250 VAC 1 HP at 125 VAC Form B: 15 A at 277 VAC 10 A at 28 VDC Form C: 30/20 A (N.O./N.C.) at 277 VAC 20/10 A (N.O./N.C.) at 28 VDC 5 thru 110 VDC 12 thru 277 VAC DC: 590 mW AC: 1.3 VA

AZ2280
Quick connects for coil & contacts AC and DC coils available Coils to 277 VAC Class F (155C) standard

AZ2310
Low cost 30 Amp switching 144 Amp inrush current Quick connect terminals Creepage distance more then 8 mm UL, CUR file E44211 No 1 Form A Form A: 30 A at 250 VAC 2 HP 125/250 VAC TV-15 at 120 VAC

Yes 1 Form A, B, C Form A: 30 A at 277 VAC 2 HP at 250 VAC 1 HP at 125 VAC Form B: 15 A at 277 VAC 10 A at 28 VDC Form C: 30/20 A (N.O./N.C.) at 277 VAC 20/10 A (N.O./N.C.) at 28 VDC 5 thru 110 VDC 12 thru 277 VAC DC: 500 mW AC: 1.4 VA

5 thru 110 VDC

5 thru 48 VDC 12 thru 277 VAC DC:500 mW AC: 1.4 VA

3 thru 60 VDC

500 mW

588 mW

Contact to coil: 2500 Vrms Between open contacts: 1500 Vrms

Contact to coil: 2500Vrms Between open contacts: 1500 Vrms

Contact to coil: 2500 Vrms High Strength version: 4000 Vrms Between open contacts: 1500 Vrms 1 x 105 at 30 A at 120 VAC

Contact to coil: 2500 Vrms Between open contacts: 1500 Vrms

Contact to coil: 4000 Vrms Between open contacts 1200 Vrms

1 x 105 at 30 A at 120 VAC

1 x 105 at 30 A at 120 VAC

1 x 105 at 30 A at 120 VAC

1 x 105 at 30 A 240 VAC

1 x 107 operations

1 x 107 operations

1 x 107 operations 1.28 x 1.08 x 1.10

1 x 107 operations 1.98 x 1.08 x 1.09

1 x 107 operations 1.40 x 1.30 x 0.25

1.25 x 1.06 x 0.75

1.27 x 1.08 x 1.09

THT UL/CUR/VDE

THT UL/CUR

THT Quick-Connects X UL/CUR

Quick-Connects X UL/CUR

Quick-Connects X UL/CUR

15

Relay Selection Guide


NEW

1.51

0.64 1.20

1.55

2.37 0.61

0.57 1.32 1.88 1.85

1.99

1.20

SERIES
FEATURES

AZ2500
Heavy loads to 15000 VA 4 kV dielectric 60 Amp switching Epoxy sealed construction available Latching

AZ2501
Low cost 50 Amp switching Heavy loads to 13850 VA 4 kV dielectric Manual switch available Epoxy sealed version available UL, CUR file pending Yes 1 Form A, C 50 A at 277 VAC 5 HP at 240 VAC 20 A at 240 VAC

AZ2510
100 Amps switching Heavy loads to 24000 VA 4 kV dielectric Meets 8 mm creepage Mechanical position indicator which may be also used for manual operation or to actuate a micro-switch Latching No 1 Form A 96 A at 250 VAC

AZ2700AZ2705
High in-rush capability Quick-connects Class B (130C) insulation standard Screw terminal available Standard (2.4 mm) and wide contact gap (3.0 mm) available AC and DC coils available Class F (155C) insulation available No 1 Form X (SPST) 2 Form X (DPST) 30 A at 277 VAC 1.5 HP at 120 VAC 3 HP at 240 VAC TV-10 at 120 VAC

EPOXY SEALED Form

Yes 1 Form A 60 A at 250 VAC

CONTACTS

Ratings (Resistive)

COIL VOLTAGES COIL POWER AT PICKUP VOLTAGE (typical)

5 thru 48 VDC

6 thru 48 VDC

6, 12 and 24 VDC

3 thru 200 VDC 6 thru 240 VAC DC: 1.08 W AC: 1.2 VA

Single coil: 486 mW Dual coil: 980 mW

Single coil: .96 W Dual coil: 1.9 W

Single Coil: 1.44 W Dual Coil: 2.88 W

DIELECTRIC STRENGTH (at sea level for 1 min.)

Contact to coil: 4000 Vrms Between open contacts: 1500 Vrms

Contact to coil: 4000 Vrms Between open contacts: 1500 Vrms

Contact to coil: 4000 Vrms Between open contacts: 2000 Vrms

Contact to coil: 4000 Vrms Between open contacts: 2000 Vrms

Electrical TYPICAL LIFE


At rated load unless otherwise specified

1 x 105 at 40 A at 250 VAC

1 x 105 at 40 A at 250 VAC

1 x 105 at 50 A 250 VAC

1 x 105 at 30 A 120 VAC

Mechanical APPROXMIATE SIZE IN INCHES L XW X H

1 x 106 operations

1 x 106 operations

1 x 106 operations

1 x 106 operations AZ2700: 1.99 x 1.32 x 1.85 AZ2701: 2.07 x 1.32 x 2.09 AZ2702: 2.03 x 1.37 x 1.42 AZ2703: 2.03 x 1.37 x 1.42 AZ2704 x 1.99 x 1.32 x 1.42 THT Quick-Connects X UL/CUR/TV

1.51 x 0.64 x 1.20

1.51 x 0.64 x 1.20

2.37 x 0.57 x 1.88

TERMINALS

PC Solder/Plug-in Bracket Mount Socket

THT (coil only) UL/CUR

THT UL/CUR

APPROVAL

16

Relay Selection Guide


2.69 1.36 1.49 0.48 0.25 0.69 1.13 0.41 0.49 0.49 1.12 0.39 0.80 0.39 0.45

AZ2800/AZ2850
30 Amp switching capability DPST-N.O. and DPDT configuration Meets 8 mm creepage, 4000 Vrms dielectric Class F (155C) insulation standard

AZ6951
Small footprint utilizing only 0.18 sq inch High sensitivity Epoxy sealed for automatic wave soldering & cleaning Thin vertical profile only 0.25 wide UL/CUR File E43203 Yes 1 Form A 5 A at 30 VDC resistive 5 A at 250 VAC general use

AZ6961
10 Amp switching capability High sensitivity, 120 mW pickup Dielectric strength 5000 Vrms Class B (130C) insulation standard, Class F available Isolation spacing greater than 8 mm Yes 1 Form A, C 10 A at 250 VAC 8 A at 30 VDC B300 Pilot Duty R300 Pilot Duty 1/4 HP at 125 VAC 1/2 HP at 250VAC

AZ6962
High Sensitivity, 120 mW Proof tracking index (PTI/CTI) 250 Dielectric strength 5000 Vrms 10 Amp switching capability UL, CUR file E43203 VDE file 40010953 Yes 1 Form A 1 Form C 2 Form C 10 A at 250 VAC 10 A 30 VDC 5 A at 250 VAC

AZ8222
Low profile Bifurcated contacts Meets FCC Part 68.302 & 68.304 Fits standard 16-Pin IC socket Ultra-sensitive, 84 mW pickup High switching capacity Yes 2 Form C 2 A at 30 VDC 1 A 125 VAC

Yes 2 Form A, C 30 A at 277 VAC (N.O.) 1 HP at 120 VAC (N.O.) 2.5 HP at 240 VAC (N.O.) 3 A at 277 VAC (N.C.)

6 thru 110 VDC 12 thru 277 VAC DC: 925 mW AC: 2.6 VA

5 thru 24 VDC

5 thru 60 VDC

5 thru 60 VDC

3 thru 48 VDC

100 mW

120 mW

120 mW

Standard: 180 mW Sensitive: 100 mW Ultra-sensitive: 84 mW

Contact to coil: 4000 Vrms Between open contacts: 1500 Vrms Contact set to contact set: 2000 Vrms 1 x 105 at 30 A at 120 VAC

Contact to coil: 3000 Vrms Between open contacts: 750 Vrms

Contact to coil: 5000 Vrms Between open contacts: 1000 Vrms

Contact to coil: 5000 Vrms Between open contacts: 1500 Vrms Contact set to contact set: 2500 Vrms 1 x 105 at 8 A at 250 VAC

Contact to coil: 1500 Vrms Between open contacts: 1000 Vrms Contact set to contact set: 1500 Vrms

1 x 105 at 5 A at 30 VDC or 250 VAC

3 x 105 at 8 A at 240 VAC

1 x 105 at 2 A at 30 VDC

5 x 107 operations AZ2800: 2.69 x 1.36 x 1.49 AZ2850: 2.06 x 1.36 x 1.20 THT (AZ2850) Quick-Connects: AZ2800 AZ2800 UL/CUR

2 x 107 operations

1 x 107 operations

3 x 107 operations 1.12 x 0.39 x 0.49

1 x 107 operations 0.80 x 0.39 x 0.45

0.69 x 0.25 x 0.48

1.13 x 0.41 x 0.49

THT UL/CUR

THT UL/CUR/VDE

THT UL/CUR/VDE

THT UL/CUR

17

Relay Selection Guide


NEW

0.59

0.30 0.36

0.83

0.63 0.80

0.76

0.61 0.60

0.61 0.48 0.55

SERIES
FEATURES

AZ8462
Microminiature size Meets FCC Part 68.302 & 68.304 Meets Bellcore 2.5 kV surge test Low profile DIP package Bifurcated contacts High sensitivity (79 mW) Bistable (latching) versions available Yes 2 Form C 2.0 A at 30 VDC 0.5 A at 125 VAC

AZ9321
High performance 6 kV lightning surge withstand Flux tight and sealed versions available Class F insulation system standard UL, CUR file E44211

AZ9431
High performance Low seated height Flux tight and sealed versions available Class B (130C) insulation standard

AZ9471
Subminiature size High in-rush capability 25 A switching in compact size High operating temperature 0.3 mm contact gap ISO/TS 16949, ISO14000 Tested in accordance with SAE J2544 Yes 1 Form C 20 A at 14 VDC (motor make) 4 A at 14 VDC (motor break)

EPOXY SEALED Form

Yes 1 Form A, C 20 A at 125 VAC 17 A at 277 VAC 1HP at 250 VAC 1HP at 125 VAC TV-8 at 125 VAC

Yes 1 Form A, C Medium duty: 10 A at 24 VDC or 120 VAC Heavy duty: 15 A at 24 VDC 10 A at 250 VAC 15 A at 120 VAC

CONTACTS

Ratings (Resistive)

COIL VOLTAGES COIL POWER AT PICKUP VOLTAGE (typical)

1.5 thru 48 VDC (AZ8462)

5 thru 48 VDC

5 thru 48 VDC

6 thru 24 VDC

79 mW (3-24 VDC) 152mW (48VDC)

203 mW

203 mW

222 mW

DIELECTRIC STRENGTH (at sea level for 1 min.)

Contact to coil: 1500 Vrms Between open contacts: 1000 Vrms Contact set to contact set: 1000 Vrms 1 x 105 at 0.5 A at 125 VAC 2 x 105 at 1.0 A at 30 VDC

Contact to coil: 3000 Vrms Between open contacts: 1000 Vrms

Contact to coil: 1500 Vrms (6kV version) 3000 Vrms Across contacts: 1000 Vrms

Contact to coil: 500 Vrms Between open contacts: 500 Vrms

Electrical TYPICAL LIFE


At rated load unless otherwise specified

5 x 104 at 20 A at 120 VAC

1 x 105 at 10 A at 120 VAC

1 x 105 at 25 A at 14 VDC

Mechanical APPROXMIATE SIZE IN INCHES L XW X H

1 x 108 operations 0.59 X 0.30 X 0.36 (AZ8462)

1 x 107 operations 0.83 X 0.63 X 0.80

1 x 106 operations

1 x 106 operations

0.76 x 0.61 x 0.60

0.61 x 0.48 x 0.55

TERMINALS

PC Solder/Plug-in Bracket Mount Socket

THT/SMT UL/CUR

THT UL/CUR

THT UL/CUR

THT

APPROVAL

18

Relay Selection Guide


NEW NEW NEW

0.89

0.65 0.45

1.11 1.11

0.60

0.60 0.72 0.80

0.91

1.04 0.87 0.88

1.03

1.03 0.98

0.90

0.75

AZ9481
High power switching (4000 VA) High sensitivity, 128 mW pickup DC coils up to 48 VDC Low profile (less than .5 height) UL file E43203 Yes 1 Form A, C Form A 10 A at 250 VAC 10 A at 30 VDC 16A at 125VAC Form C 10/6 A (N.O./N.C.) at 250 VAC 10/6 A (N.O./N.C.) at 30 VDC T Version - 5

AZ9481F
Quick connect and PC terminals High power switching (4000 VA) High sensitivity, 128 mW pickup UL file E43203, TV R50053055 Yes 1 Form A

AZ9621
10 A switching in miniature size Epoxy sealed version available Creepage/Clearance 4mm/3mm Class F (155C) insulation standard Yes 1 Form A, C Form A 10 A at 250 VAC Form C 10 A/4 A at 250 VAC

AZ9701/AZ9711
Cost effective High in-rush capability Open or sealed versions available US & European footprints Coils to 24 VDC ISO/TS 16949, ISO14000 Tested in accordance with SAE J2544 Yes 1 Form A, C 45 A at 14 VDC

AZ9801
Super-ISO 70 Amp contact rating (Super ISO) High momentary carry current (500 A) ISO/TS 16949, ISO14000 Tested in accordance with SAE J2544 Yes 1 Form A

10 A at 250 VAC 10 A at 30 VDC 16 A at 125 VAC 10 A at 30 VDC 16 A at 250 VAC 8 A at 250 VAC 10 A at 30 VDC

70 A at 14 VDC

5 thru 48 VDC 128 mW

5 thru 48 VDC 128 mW

5 thru 36 VDC 200 mW

6, 9,12, 24 VDC Standard coil: 484-573 mW Sensitive Coil: 675 mW

6, 12, 24 0.68 W

Contact to coil: 2500 Vrms Between open contacts: 1000 Vrms

Contact to coil: 2500 Vrms Between open contacts: 1000 Vrms

Contact to coil: 2500 Vrms Between open contacts: 1000 Vrms

Contact to coil: 500 Vrms Between open contacts: 500 Vrms

Contact to coil: 500 Vrms Between open contacts: 500 Vrms

1 x 105 at 10 A at 250 VAC

1 x 105 at 10 A at 250 VAC

5 x 104 at 10 A at 250 VAC

1 x 105 at 40 A at 14 VDC

1 x 105 at 70 A at 14 VDC

1 x 107 operations 0.89 x 0.65 x 0.45

1 x 107 operations 1.11 x 0.90 x 1.11

5 x 106 operations 0.60 x 0.60 x 0.80

5 x 106 operations Open (AZ9701): 0.91 x 0.75 x 0.72 Sealed (AZ9711): 1.04 x 0.87 x 0.88

1 x 107 operations 1.03 x1.03 x.980

THT UL/CUR/TV

THT Quick Connects UL/CUR/TV

THT UL/CUR

THT UL/CUR

Quick Connects X X

19

Relay Selection Guide


NEW

1.50 1.37 2.96 2.20 1.19 4.14

0.95

0.26 0.79

1.80

0.90 2.30

SERIES
FEATURES

AZKUP
Plug-in / solder terminals High switching capacity AC and DC coils Unique Armature stop, maintains adjustment Class F Insulation UL, CUR file E44211 FEATURES

SG-24F
Photo isolation Up to 800V blocking voltage LED status indicator Both Zero Voltage and phase controllable Switching versions High Surge Capability Built-in Snubber Triac Output Circuitry Yes 3 thru 32 VDC

SGC-4F
Photo isolation 600V blocking voltage Both Zero Voltage and phase controllable Random Switching versions High Surge Capability

SGX-1505FB
Photo isolation 800V blocking voltage Both Zero Voltage and phase controllable Random Switching versions High Surge Capability Built-in Snubber Triac Output Circuitry Yes 3 VDC max. 15 mA 1.0 VDC Type 24: 48 to 240 VAC Type 38: 48 to 380 VAC 40 A 400 A 0.1 mA

EPOXY SEALED Form

No 1-3 Form C 13 A at 120 VAC 13 A at 277 VAC 3 A at 600 VAC 1/3 HP at 120 VAC 1/2 HP at 277 VAC 10 A at 28 VDC 1HP at 277 VAC 3/4 HP at 600 Vac B600 Pilot Duty 12 thru 240 VAC 12 thru 110 VDC DC : 675 mW AC:1.6 VA

EPOXY SEALED Turn on Voltage Current Turn off Voltage Voltage Range Maximum Current Maximum Inrush Min. Load Current

Yes 4 thru 28.8 VDC 15 mA 1.0 VDC 50 to 250 VAC 2A 30 A 15 mA

INPUT

CONTACTS

Ratings (Resistive)

35 mA at 32 VDC 1.0 VDC 36 to 440 VAC 25 A

COIL VOLTAGES COIL POWER AT PICKUP VOLTAGE (typical)

OUTPUT

250A 0.1 mA 3 mA to 10 mA

Leakage Current Frequency Range

1.5 mA

3 mA to 10 mA

47 to 70 Hz

47 to 70 Hz

47 to 70 Hz

DIELECTRIC STRENGTH (at sea level for 1 min.)

Contact to coil: 2200 Vrms Between open contacts: 800 Vrms Contacts set to contact set: 2200 Vrms 1 x 105 at rated load

DIELECTRIC STRENGTH
(at sea level for 1 min.)

4000 Vrms

2000 Vrms

4000 Vrms

Electrical TYPICAL LIFE


At rated load unless otherwise specified

INSULATION RESISTANCE

1000 megohms min. at 500 VDC

1000 megohms min. at 500 VDC

1000 megohms min. at 500 VDC

Mechanical APPROXMIATE SIZE IN INCHES L XW X H

1 x 107 operations 2.90 x1.50 x 2.20

AMBIENT OPERATING TEMPERATURE APPROXMIATE SIZE IN INCHES L XW X H

-30C (-22F) to 80C (176F)

-30C (-22F) to 80C (176F)

-30C (-22F) to 80C (176F)

4.14 x 2.96 x 1.19

0.95 x 0.26 x 0.79

2.30 x 1.80 x 0.90

TERMINALS

PC Solder/Plug-in Bracket Mount Socket

X UL/CUR

PC Solder/Plug-in Bracket Mount Socket APPROVAL

UL/CUR

THT UL/CUR

UL/CUR

APPROVAL

20

Relay Selection Guide

Upcoming New Products


ELECTROMECHANICAL RELAYS

AZ880 AZPRD AZ2250

10A Latching 50 A 1 & 2 Pole 30 A with 600 mW

Other Products
XMC0 Contactors (50-60 Amp) Thermistors / Temp. Sensors High Current Solenoids Potential Motor Start Relays

TS Series ZCS1-70/71-120 ZCPR

21

Relay Footprints
AZ164-AZ168 AZ5
.39 .18 .16 .52

.42
.70

.41 .66

.56

2C

AZ8

1CT & 2CT


.52 .16 .26 .16 .52 .17

.66

.41 .66

.41

3C

4C

AZ164

AZ420
2 POLE .406 .458 .543 4 POLE

.39

.18

.16

.52

.42
.70

.41 .66

.106
.56

2C

1CT & 2CT


.52 .16 .26 .16 .52 .17

.406 .543 6 POLE

.458

.106

.66

.41

.66

.41

.406 .543

.458

.106
3C 4C

Note: All un dimensioned footprints are on .100 grid. All footprints are viewed toward terminals.

22

Relay Footprints
AZ673
C
5 x .051 [1.3] .650 [16.5]

AZ742
.197 .590 .197

D
.295

.295 [7.5]

OMIT FOR FORM A VERSION

.138 [3.5]

.138 [3.5]

AZ743
.197 .590 .197

.295

AZ697
.649 .138 .138

.295

AZ755
.197 .590 .197

.295

AZ733
.197 .590 .197

AZ756
.295
.138 .787

.299

AZ733W
.197 .787

AZ757
.295
[17.20]

.024 [0.60]

.295 [7.50]

AZ734
.590 .197
.070

AZ760
.855 .143

.295
.465

Note: All un dimensioned footprints are on .100 grid. All footprints are viewed toward terminals.

23

Relay Footprints
AZ761
5X .051 [1.3] .138 [3.5] .138 [3.5]
.098 [2.5]

AZ763
.138 [3.5] 5 x .051 [1.3] .138 [3.5]

*
.787 [20.0]

.295 [7.5]

.299 [7.6] .101 [2.56]

.098 [2.5]

.787 [20.0]

.260 [6.6]

AZ763 3.5mm SPACING 1 FORM C

* Not used on 1 Form A relay


.197 [5.0] 5 x .051 [1.3] .098 [2.5] .197 [5.0]

3.5mm SPACING FORM "C"

*
.787 [20.0]

.295 [7.5]

[1.3]

.197 [5.0]

.197 [5.0]

.098 [2.5]

.299 [7.6]
.098 [2.5]

AZ763L 5.0mm LEFT SPACING 1 FORM C


.787 [20.0]

.787 [20.0]

.260 [6.6]

.098 [2.5]

*
5 x .051 [1.3] .197 [5.0]

.295 [7.5]

5.0mm SPACING FORM "C"

.197 [5.0]

AZ763R 5.0mm RIGHT SPACING 1 FORM C

AZ762
.197 [5.0] .197 [5.0] .591 [15.0] .098 [2.5]

AZ764
.197 .590 .197

.295
.295 [7.5] .098 [2.5]

6X .050 [1.3]

2X .032 [0.8]

AZ765

FORM A .055 .055 .051 .300

AZ762F
.494

2-.051 [1.30]

1.280 [32.50]

.197 [5.00]

FORM C

.295 [7.50]

AZ766
.098 [2.50] .098 [2.50] 4-.059 [1.50]
.139 .400

.465

Note: All un dimensioned footprints are on .100 grid. All footprints are viewed toward terminals.

24

Relay Footprints
AZ767
.059 .100

AZ832

.300

.441

AZ832P AZ769
1.087 .150

.472

.866

AZ850
.240

.748

AZ770
.60 [15.24]

AZ851
10x.04 10x.12

.30 [7.6]

.25 [6.35]

.26

.157 [4]

8x.10

Type 1
AZ852
.50 [12.7] .1 [2.54]

THT

.30 [7.6]

0.2 [5.08

.06 [1.5]

0.13 [3.2]

0.09 0.09 [2.2] [2.2]

SMT

Type 2
0.26 [6.64]

0.03 [0.8]

AZ830-4POLE
0.13 [3.2] 0.09 0.09 [2.2] [2.2]

.100 [2.56]

SMTss

0.03 [0 8 [0.8]

0.24 [6.14] .08 [2.08] 0.13 0.09 0.09 [3.2] [2.2] [2.2]

Note: All un dimensioned footprints are on .100 grid. All footprints are viewed toward terminals.

25

Relay Footprints
AZ853
THT
.3 [7.6] .125 .09 [3.2] [2.2] [

AZ934
.541 [13.75] .086 [2.2] .11 [2.8]

.125 [3.2]

.3 [7.6] .125 [3.2] [2.2] 8-.124 [3.1] .21 [5.3]

.148 [3.75] .246 [6.25] .098 [2.5]

.541 [13.75]
.148 [3.75]

.087 [2.2]

8-.031 [0.8]

.148 [3.75] .148 [3.75]

.11 [2.8]

SMT
.3 [7.6] .125 [3.2] .09 [2.2]

.246 [6.25]

.098 [2.5]

8-.09 [2.25] .175 [4.45]

AZ935
.148 3 x .148

8-.03 [0.8]

SMTss

.665 .226 .148

AZ881
.738

Single side stable & 1 coil latching -1A


.400 [10.16] .300 [7.62]

AZ939
-1 AB
.400 [10.16] .300 [7.62]

4- .043 [1.1]

.185 [4.7]

.300 [7.62]

.300 [7.62]

4-.047 [1.20]

6-.047 [1.20]

.276 [7.0]

.453 [11.5]

-1 A
2 coil latching
.100 [25.4] .300 [7.62] .300 [7.62] .100 [25.4]

-2A, -1 AB

AZ940
.300 [7.62] .300 [7.62]

.300 [7.62]

.300 [7.62]

6-[.047] [1.20]

8-[.047] [1.20]

Viewed Toward Terminals

AZ942/AZ942A
.078 .480

AZ920

.472 .236
0.1 [2.54] 0.4 [10.16] 0.2 [5.08]

Standard

AZ942H
.078 .480

0.1 [2.54]

0.3 [7.62]

0.3 [7.62]

.472 .236

K Version

Note: All un dimensioned footprints are on .100 grid. All footprints are viewed toward terminals.

26

Relay Footprints
AZ943/AZ943H
.100 [2.54]
5X.051 [1.30] .134 [3.40] .059 [1.49] .236 [6.00]

AZ957
.300 [7.62]

.472 [12.00]

.200 [5.08]

.480 [12.20] .559 [14.20]

6x.039 [1.0]

AZ961

AZ943S
.606 [15.40]

AZ973
5X.079 [2.00]
.665

.472 [12.00]

.236 [6.00]
5x.248 .39

.315

.059 [1.50]
VIEWED TOWARD TERMINALS

5X.197 [5.00]

AZ974
87 86
.080 [2] .315 [8]

.330 [8.4]

85
.705 [17.9] .080 [2]

.330 [8.4]

87 86 87A

85

.705 [17.9]

30

30

AZ946
.40 .10 .20 .15 .20 .15
.333 [8.45] .665 [16.9] .333 [8.45] .665 [16.9]

1A
AZ975/AZ976
0.200 [5.08]
1 4 2 0.200 [5.08] 0.033 [0.85] 0.073 [1.85]
0.200 [5.08]

1C

0.200 [5.08]

0.350 [8.89] 0.150 [3.81]


5 3 7 6

0.350 [8.89] 0.150 [3.81]

7-0.051 [1.30]
5 3 7 6

AZ954

7-0.051 [1.30]

0.047 [1.20]

0.056 [1.42]

0.094 [2.40]

0.071 [1.80]

Note: All un dimensioned footprints are on .100 grid. All footprints are viewed toward terminals.

27

Relay Footprints
AZ977
.315 [8.0]

AZ984

85 .354 [9.0] .177 [4.5] 87a 86 87 30

.554 [14.1]

.099 [2.6]

AZ979
30

.705 [17.9]

85 .327 [8.3] 87

88

1.173MAX [29.8]

AZ986
.638.008 [16.20.2] .319.008 [8.10.2]
+.008

.661 [16.8] 1.173MAX [29.8]

Form A

5X.031-.004 [0.8 ] +0.2


-0.1

30

.307 [7.8]
88 .311 [7.9] 87 1.173MAX [29.8]

.705 [17.9]

85 .327 [8.3]

87

5X.110.008 [2.80.2]

.661 [16.8] 1.173MAX [29.8]

Form C

AZ987
.315 [8.00]

AZ980
30
2-.067 [1.7] .071 [1.80] .142 [3.60]

.705 [17.9]

85

87A

86 .311 [7.9]

.118 [3.00] .402 [10.20] 2-.020 0.50 .020 [0.50]

.327 [8.3]

87

.661 [16.8]

FORM A,C SINGLE

AZ983
2 x .076 .003 [ 1.93 .076] .335 [8.5] .331 [8.4]

.137 [3.5]
.418 [10.6] 2 x .150 [3.8]

4-.067 [1.7]

.315 [8.00] .276 [7.00]

.764 [19.4] 2-.071 [1.80]

0,079 [2,00] 4-.087 [1.10] .024 [0.60]

.118 [3.00] .053 [1.35]

.283 [7.20]

.669 [17.0] 2 x .300 [7.6] 9 x .086 .003 [ 2.18 .076]


4-.087 [1.10]

.020 [0.50]

.390 [9.9]

.315 [8.0]

.276 [7.00] .315 [8.00]

4-.067 [1.7]

.118 [3.00]

FORM A,C
FORM C VERSION SHOWN VIEWED TOWARD TERMINALS

TWIN

Note: All un dimensioned footprints are on .100 grid. All footprints are viewed toward terminals.

28

Relay Footprints
AZ988
.300 (7.6)

AZ2100
.081 .003 DIA (3 PLACES) (2.06 .076)

4 2

5 3
.900 (22.84)

C1/C2
.276 [7.00] 3X.083 [2.10] .315 [8.00] 5X.031 [0.80]

.400 (10.2) .150 (3.81) .550 (13.96) .700 (17.77)

.043 .003 (1.09 .076)DIA

.354 [9.00]

.177 [4.50]

*
C3
2X.098 [2.50]

Viewed toward terminals

AZ2110
.30 .10 .15 .20 .40 .70

AZ989

.10 .50

Form C
.157 [4.0] .189 [4.8] .031 [0.8] .331 [8.4] 2-.020x.012 [0.5x0.3] 3-.047x.012 [1.2x0.3]
.10 .15 .20 .40 .70

AZ2150
.30

.157 [4.0] .189 [4.8] .134 [3.4] .189 [4.8] .031 [0.8]

.331 [8.4] 6-.047x.012 [1.2x0.3]

.10 .50

Form C

AZ2200

4-.012x.020 [0.3x1.2]

BOTTOM VIEW

Form C

Note: All un dimensioned footprints are on .100 grid. All footprints are viewed toward terminals.

29

Relay Footprints
AZ2270
.701 [17.8] 2X.062 [1.57] .045SQ [1.14SQ]

AZ2501
.376 [9.6] 1.083 [27.5] .472 [12.0] 3x .041 [1.04]

.295 [7.5]

2X.032 [0.81] .906 [23.0] .606 [15.4]

.098 [2.5]

.132 [3.35]

.266 [6.8]

.167 [4.3]

.150 [3.8] .551 [14.0]

2X.025SQ [0.64SQ]

2 3 5 4
3x .073 [1.86] .394 [10.0]

6 1
.109 [2.77]

AZ2280
1.71

Suffix K only

2x.14

AZ2510 AZ2310
.197 [5.00] 3X.039 [1.00]
2 x .177 [4.5] 1.713 [43.5]

.197 [5.00] 0.329 [8.36] 3X.028 [0.70] 0.571 [14.50]

AZ2500
.751 [19.08]

1.00 [25.4]

.850 8 [21.59]

AZ2700
1.44

.110 [2.80]

.100 [2.54]

AZ2500P1-1
.751 [19.08]

.70

.44 .56 2.36

.44

1.00 [25.4] .110 .200

1.44

.70

AZ2500P1-2 "K"
.56
.751 [19.08]

2.36

1.00 [25.4]

.850 [21.59] .110 [2.80]

[5.08]

.100

AZ2500P2

30

Relay Footprints
AZ2701
1.44
1.44

AZ2704

.70

.70

.44 .57

.44

.44 .57 1.44

.44

1.44
.70

.70
.57

.57

AZ2705 AZ2702
.56 .44 .44

2.362 [60]

.75

1.57

.56

AZ2800
.75

1.57

.18

2.35

AZ2703
.57 .44 .44

.75

AZ2850
1.57

AZ2850
1.21 .27 .20 .08

.31
.57

.75

.20 .43

1.00

1.57

.20

31

Relay Footprints
AZ6951
[5.08] 0.2

AZ8222
8X 0.035 [ 0.9]

0.300 [7.62]
0.044 [1.13]

0.1 [2.54]

0.3 [7.62]

0.2 [5.08]

0.047 [1.2]

0.300 [7.62] 0.500 [12.7] 0.700 [17.78]

AZ6961

AZ8461
.59 [15.0] 8-.031 [0.8]

5x.051 [1.3]

.870 [22.1]

.062 [1.57]
.30 [7.5] .200 [5.08]

.298 [7.56]

FORM C
.126 [3.2]

.050 [1.3] .126 [3.2]


.046 [1.16] .200 [5.08] .100 [2.54] .100 [2.54]

.043 [1.1]

4x.051 [1.3]

.744 [18.9]

.116 [2.95]
.050 [1.3]

AZ8462
PC Board Layout (DIP type)
.200 [5.08] .100 [2.54]

.298 [7.56]

FORM A
.198 [5.04]

PC Board Layout (SMT type)


.039 [1.00] .200 [5.08] .100 [2.54]

.200 [5.08]

.122 [3.11] .283 [7.19]

AZ6962
5 x .051 [ 1.3] .870 [22.1] .062 [1.57]

8-0.039 [1.00] SINGLE SIDE STABLE & 1 COIL LATCHING .200 [5.08]
.050 [1.3]

SINGLE SIDE STABLE & 1 COIL LATCHING

.100 [2.54]

.039 [1.00]

.200 [5.08]

.100 [2.54]

.298 [7.56]

1 FORM C

.200 [5.08]
.126 [3.2] .126 [3.2]

0.122 [3.11] .283 [7.19]

10-0.039 [1.00]

4 x .051 [ 1.3]

.744 [18.9]

.116 [2.95]

2 COIL LATCHING

2 COIL LATCHING

.298 [7.56]

1 FORM A

.050 [1.3]

.198 [5.04] .062 [1.57]

AZ9321

8 x .051 [ 1.3]

.744 [18.9]

1A
.050 [1.3]
4-.051 [1.3] .236 [6.0]
.236 [6.0]

1C
5-.051 [1.3]

.298 [7.56]

2 FORM C

.126 [3.2]

.126 [3.2]
.079 [2.0] .480 [12.2] .079 [2.0] .480 [12.2] .236 [6.0] .236 [6.0]

VIEWED TOWARD TERMINALS

Note: All un dimensioned footprints are on .100 grid. All footprints are viewed toward terminals.

32

Relay Footprints
AZ9701/AZ9711 AZ9431
.134 [3.40]

.586 [14.88] .134 [3.4]


.059 [1.49]

.211 [5.35] .092 [2.33] .148 [3.75] .161 [4.08] .483 [12.28]

.213 .147 [5.4] [3.73] .467 [11.87]

.472
12.00

.236 [6.0]

.480 [12.20] .559 [14.20]

AZ9711
.586 [14.88] .176 [4.47] .211 [5.35] .092 [2.33]
3 Yoke Term.

AZ9471
.40 .20 .40

.268 .147 [6.81] [3.73] .467 [11.87] .148 [3.75]

.161 [4.08]

.483 [12.28]

.10

AZ9801
30

AZ9481
.701 [17.8] 2-.036 [0.9] .701 [17.8] 2-.036 [0.9]
.327 [8.3] .705 [17. 9] 85

86

87 .661 [16.8]

0.5 [12.7]

0.5 [12.7]

AZKUP
0.4 [10.2] 0.3 [7.62] 3-.052 [1.3]

0.4 [10.2]

2-.052 [1.3]

FORM A

FORM C

AZ9481F
2-.036 [0.9]

SG-24F

1.874

3.614

.701 [17.8]

.039 [1.0] .071 [1.8]

.561 [14.3]
4 x .039 [1.0]

SGC-4F
TERMINAL STYLE "T"
.171 [4.35]

.634 [16.1]

.197 [5.0]

.056 [1.42]

AZ9621

TERMINAL STYLE "M"


4 x .039 [1.0]
.197 [5.0] . .197 [5.0]

.171 [4.35]

0.295 [7.5]

.056 [1.42]

SGX-1505FB
.049 [1.25] .197 [5.0] .246 [6.25] .098 [2.5]

1.870 [47.5]

Note: All un dimensioned footprints are on .100 grid. All footprints are viewed toward terminals.

33

Suggested Equivalents
American Zettler, Inc. offers this list of suggested equivalents by its own and other relay manufacturers part numbers as a guideline for possible interchangeability. Because critical parameters such as coil resistance, must operate voltage, terminal footprint, etc. may differ slightly, a detailed comparison between data sheets should be done before selecting a particular relay as an exact cross reference. Due to rapid addition, deletion, and revision of its own and competitive relays, American Zettler, Inc. cannot guarantee the total accuracy of this list. Questionable interchangeability of products should be referred to American Zettler, Inc. for clarification. NAIS (Aromat)
ALD CB 40 amp CM CT5 DS2 DS2 Latching DS2Y DS4 HD HL K 2-Pole K 4-Pole K 6-Pole KE JE-X JJM JM JR JS JSM JT JTN JTN JTN1 JV JW1 JW2 LA LD LK PA TQ TW TX

Zettler
AZ939 AZ973/AZ974 AZ988 AZ934/AZ935 AZ830/AZ832 AZ830P/AZ832P AZ830/AZ832 AZ830 4-Pole AZ955/AZ957 AZ164/AZ165/ AZ166 AZ420/AZ428 AZ421/AZ429 AZ431/AZ439 AZ2428/AZ2429 AZ991 AZ9471 AZ760 AZ725/AZ755 AZ942/AZ943 AZ942A AZ2100/AZ2200 AZ2110/AZ2210 AZ2150/AZ2250 AZ2270 AZ9481 AZ692/AZ697/ AZ761 AZ732/AZ733/ AZ743 AZ734 AZ939 AZ672/AZ673 AZ920 AZ847/AZ850 AZ833/AZ8461 AZ833/AZ8461

FujitsuTakamisawa
FBR610 K FBR610 FBR620 FRL FTR-F1 FTR-H1 FTR-P2 JS LZ MZ NA NY RA RA4 RY SY VB VH VS VSB

Zettler (cont.)
AZ725/AZ755/ AZ762 AZ692/AZ697/ AZ761 AZ732/AZ733/ AZ743 AZ9711 AZ743 AZ761 AZ934/AZ935 AZ696/AZ6961/ AZ6962 AZ8 AZ951/AZ954X AZ8461/AZ833 AZ920 AZ8222/AZ832 AZ830 4-Pole AZ8222/AZ832 AZ955/AZ957 AZ732/AZ733/ AZ743 AZ760 AZ692/AZ761/ AZ697 AZ755/AZ762

Hasco
SSD SSR T

Zettler (cont.)
AZ8 SGC-4F AZ850/AZ850P

Mid-Tex (CII)
158 258

Zettler (cont.)
AZ164/AZ165/ AZ166 AZ164/AZ165/ AZ166

Idec
RW RG RCN RT

Zettler
AZ830/AZ832 AZ692/AZ2692/ AZ697/AZ761 AZ942/AZ943 AZ420

NEC
EA2 EB2 EC2 EE2 MR301 MR31 MR602 MR602 MR602 MR604 MR612 MR612 MR614 MR62 MR62 MR622 MR71 MR72

Zettler
Z847/AZ7850 Z848/AZ851 AZ833/AZ8461 AZ833/AZ849 AZ942/AZ942A/ AZ943/AZ9431 AZ942/AZ943/ AZ9431 AZ8222 AZ830/ AZ832 AZ830P/AZ832P AZ830 4 POLE AZ830/AZ831/ AZ832 AZ830P/AZ832P AZ830 4 POLE AZ8222 AZ830AZ832 AZ830/AZ832 AZ692/AZ2692/ AZ697/AZ761 AZ732/AZ2732/ AZ733/AZ743

Magnecraft (MSD)
Class 67 Class Class Class Class Class 76 76 76 78 90

Zettler
AZ420/AZ421/ AZ431 AZ692/AZ697 AZ732/AZ733 AZ725/AZ755 AZ164/AZ165 AZ2110/AZ2120/ AZ2150 AZ2100/AZ2280 AZ942/AZ943 AZ8222 AZ5Y/AZ952/ AZ954Y AZ5X/AZ951/ AZ954X AZ942/AZ943 AZ692/AZ697 AZ732/AZ733 AZ725/AZ755 AZ164/AZ165 AZKUP

Class 91 Class 178 Class 272 Class 232 Class 232 Class Class Class Class Class Class 270 277 277 277 281 283

Guardian
1390 AC/DC 1390P AC/DC 1390F AC/DC 1495 1505 1540 AC 1545 DC 1555 1575 1655/1655S 1655/1655S 167 1690 AC/DC 1690F AC/DC

Zettler
AZ165 AZ164 AZ166 AZ8222 AZ5Y/AZ952/ AZ954Y AZ165 AZ164 AZ420 AZ942/AZ943 AZ692/AZ697/ AZ761 AZ732/AZ733/ AZ743 AZ8 AZ165 AZ166

Omron
G2E G2L G2R

Zettler
AZ5Y/AZ952/ AZ954Y AZ693/AZ2693 AZ692/AZ2692/ AZ697/AZ723/ AZ732/AZ2732/ AZ733/AZ743/ AZ761/AZ763/ AZ764 AZ8222 AZ8 AZ942/AZ943/ AZ9431 AZ9481 AZ942/AZ943/ AZ9431 AZ939 AZ734 AZ955/AZ957 AZ8222 AZ830/AZ832 AZ830P/ AZ832P AZ830 4 POLE AZ6951 AZ696/AZ6961 AZ2100 AZ2700 AZ988 AZ974

Mid-Tex (CII)
157 MQP MN MD 190 327 327 191 MS 410 500 501 496 596 597 498 491 590 V4 VM 156

Zettler
AZKUP AZ847/AZ850 AZ833/AZ8461 AZ8222 AZ8222 AZ830/AZ832 AZ830P AZ832P AZ955/AZ957 AZ5Y/AZ952/ AZ954Y AZ420 AZ766 AZ765 AZ942/AZ943 AZ943 AZ932 AZ725/AZ755/ AZ762 AZ2100/AZ2120/ AZ2280 AZ2110/AZ2150 AZ973 AZ942A AZ975/AZ976 AZ164/AZ165/ AZ166

Bosch
0 332

Zettler
AZ988

C P Clare
LM LM LX LQ

Zettler
AZ8222 AZ830/AZ832 AZ830P/AZ832P AZ847/AZ850

G2V G4K G4S G5C G5L G5N G5PA-2 G5V-1 G5V-2 G6A G6A G6A G6D G6R G7G G7L G8H G8J

Crydom
D53

Zettler
SG-24F

Hasco
2KLT BAS-111 BAS-511 CAR CAS212 HAS-115 HAS-211 HAS-212 HAT-901 HAT-904 HBS HPR KLT KSD MHR SLT

Zettler
AZ945 AZ952/AZ954Y AZ952 AZ973 AZ8222 AZ8222 AZ952 AZ8222/AZ830 AZ2150/AZ2151 AZ2800/AZ2850 AZ957 AZ940 AZ943 AZ946 AZ9481 AZ9471

FujitsuTakamisawa
A BA FBR10 FBR160 JS FBR210

Zettler
AZ847/AZ850 AZ833/AZ8461 AZ833/AZ8461 AZ942/AZ943 AZ6962 AZ5X/AZ5Y/ AZ951/AZ952/ AZ954X/AZ954Y AZ8222 AZ9471

FBR240 FBR51

34

Suggested Equivalents
Omron
G8N G8P

Zettler (cont.)
AZ989 AZ2110/ AZ2111/ AZ2150/ AZ2151 AZ986 AZ942/AZ943/ AZ9431 AZ164/AZ165/ AZ166 AZ420/AZ421/ AZ428/AZ429 AZ2428/ AZ2429

Schrack

Zettler (cont.)
AZ2111/ AZ2150/ AZ2151 AZ942/AZ943/ AZ9431 AZ420/AZ421/ AZ428/AZ429/ AZ431/AZ439 AZ420/AZ421/ AZ428/AZ429/ AZ431/AZ439

Tyco (P & B)

Zettler (cont.)
AZ428/AZ429/ AZ431/AZ439 AZ2428/ AZ2429 AZ743/AZ761/ AZ762 SGX-1505FB AZ989 AZ942/AZ943/ AZ9431 AZ942/AZ943/ AZ9431 AZ942/AZ943/ AZ9431 AZ942/AZ943/ AZ9431 AZ942A AZ8/AZ8A AZ696 AZ767 AZ770 AZ5X/AZ951/ AZ954X AZ8222 AZ830/AZ832 AZ830 4-Pole AZ8222 AZ2110/ AZ2111/ AZ2150/ AZ2151 AZ2100/ AZ2101/ AZ2200 AZ2100/ AZ2150/ AZ2270/ AZ2280 AZ2800/ AZ2850 AZ956/AZ956P AZ832 AZ989 AZ987 AZ833/AZ8461 AZ8222 AZ847/AZ850 AZ973/AZ974 AZ983 AZ986 AZ988 AZ975/AZ976 AZ9701/ AZ9711 AZ984

R10R RT SSRT TB1 T70 T7C T7N T72 T72J/T72K/T72M T73 T75 T77 T77V/T773 T81 T82 T83 T84 T85 T90

ZF ZK

G8W LC LY MHS MHQ

ZL

Song Chuan
792 792H 793 801H/A 812H 812HM 821 822E 832 833H 834 835 841 842 842A 845 SCLB/SCLD SCLA SCL/SCL-1

Zettler
AZ973 AZ973 AZ697/AZ733/ AZ755 AZ943 AZ943 AZ943 AZ760 AZ97011/ AZ9711 AZ2110/ AZ2150 AZ943 AZ766 AZ767 AZ2702 AZ954Y AZ954X AZ743/AZ761/ AZ762 AZ164/AZ165 AZ164/AZ165 AZ164/AZ165

OEG
OUA/OUAT OUAZ ORZ ORZ OUDT/OUDTM OUDE SRU/SRUT ORW ORA OMI/OMIH OMI/OMIH OSA SRET SRW OZ OZF OMIT OJ/OJE PCD

Zettler
AZ951/AZ954X AZ951/AZ954X AZ820/AZ8222 AZ830/AZ832 AZ8/AZ8A AZ8/AZ8A AZ942/AZ943/ AZ9431 AZ942/AZ943/ AZ9431 AZ991 AZ692/AZ2692/ AZ697/AZ761 AZ732/AZ2732/ AZ733/AZ743 AZ673/AZ734 AZ164/AZ165/ AZ166 AZ943 AZ762 AZ756 AZ692/AZ2692/ AZ697/AZ761 AZ767/AZ770 AZ948

T91

T9A

Taiko
TB1

Zettler
AZ989 T92 V23026 V23042 V23086 V23086 V23079 V23105 V23106 VF4 VF7 VF28 VFM VKM VKP VM

Telemecanique
DR DRS T154

Zettler
AZ8222 AZ830/AZ832 AZ420/AZ421/ AZ428/AZ429/ AZ431/AZ439 AZ420/AZ421/ AZ428/AZ429/ AZ431/AZ439

Schrack
RP

Zettler
AZ692/AZ2692/ AZ697/AZ723/ AZ732/AZ2732/ AZ733/AZ743/ AZ761/AZ763/ AZ764 AZ8222 AZ830/AZ832 AZ830P/ AZ832P AZ743/AZ761/ AZ762 AZ696/AZ6961/ AZ6962 AZ2110/ AZ2111/ AZ2150/ AZ2151 AZ2100/ AZ2280 AZ942/AZ943/ AZ9431 AZ942/AZ943/ AZ9431 AZ8/AZ8A AZ2110/

T163

RS RS RS RT RY TD

Texcell
CN

Zettler
AZ734

Tyco (P&B)
K10 KUP PB RKA/RKS

Zettler
AZ164/AZ165/ AZ166 AZKUP AZ9621 AZ692/AZ2692/ AZ697/AZ725/ AZ755/AZ761/ AZ762 6962 AZ9481 RKA/RKS AZ732/AZ2732/ AZ733/AZ743 AZ420/AZ421/

TE TF TN TP ZD

T75 PCD

R10

35

Point your browser to http://www.azettler.com

It is here that you will find: Complete data sheets for all the relays you see in this selector guide. These data sheets are in Adobe Acrobat PDF format. This means you can download and print at 600 dpi for crystal clear copy. Autocad drawing files (in both Autocad and DXF format) of each relays footprint and terminal layout so you can simply drop the drawing into your PCB layout drawing. Downloadable UL Component Recognition Cards (yellow cards) for relays approved by UL. Full up-to-date listing of all our Sales Representatives and Distributors and the ability to check distributor stock. Forms for requesting catalogs, data sheets and application information as well as a sign-up form for American Zettlers e-mail newsletter.

INTERNATIONAL OFFICES
ZETTLER ELECTRONICS Gmbh GERMANY Junkersstrasse 3 D-82178 Puchheim Germany Tel: 49-89-80097170 FAX: 49-89-80097200 E-mail: office@zettlerelectronics.com AMERICAN ZETTLER, INC. 75 Columbia Aliso Viejo, California 92656 U.S.A. Tel: 949-831-5000 FAX: 949-831-8642 E-Mail: sales@azettler.com ZETTLER ELECTRONICS (HK)LIMITED Room 211, Hewlett Centre 52-54 Hoi Yuen Road Kwun Tong, Hong Kong Tel: 86-852-2375-1288 FAX: 86-852-2375-7433 E-Mail: sales@zettlerhk.com

ZETTLER ELECTRONICS SHANGHAI Room 2107, Xinda Building No.322 Xianxia Road Shanghai, China Tel: 86-21-6278-5776 FAX: 86-21-6278-5773 E-mail: sales@zettlercn.com

XIAMEN ZETTLER ELECTRONICS CO., Ltd. 6/F Yingfeng Building No. 48-50 Huli Avenue Xiamen 361006, China Tel: 86-592-5654-798 FAX: 86-592-5654-955 E-Mail: sales@zettlercn.com

Printed 6/06 - 2M

Anda mungkin juga menyukai