PREFACE
Engineering education is continuous accumulation of growing knowledge and experience. Many topics which were of specialized nature a decade ago are now of common use. The present syllabi for the eight-semester Under Graduate course and four-semester Post Graduate course have been updated so as to expose the students to the latest methods in Engineering Analysis, Design and Construction techniques. This booklet contains the revised course structure and syllabi recommended by board of studies of the Civil Engineering Department, endorsed by faculty of Engineering and Technology and approved by Academic Council of AMU, Aligarh. I sincerely thank all the colleagues of the department who helped in revising the syllabi. I express my gratefulness to Prof. V.P. Mital, Prof. R.U. Khan, Prof. P. A. Saini, Prof. M. M. Ashhar, Prof. S.S. Shah, Prof. H. Abbas, Mr. F. Ghani, Mr. S.A. Khan, Dr. A. Baqi, Dr. Mohd. Arif, Dr. Mohd. Muzammil and Dr. M. Athar for their useful comments and suggestions. Special thanks are due to Mr. Sabih Akhtar for coordinating the whole process of syllabi revision, which took almost three years. He was also instrumental in the development of some of the syllabi of his area of interest. His effort in the preparation of manuscript in presentable form is highly appreciated.
Mohd. Jamil
Professor and Chairman Department of Civil Engineering Zakir Husain College of Engineering and Technology Aligarh Muslim University Aligarh-202 002, India. October 15, 2006
CONTENTS
Page No.
General Information of the Department Course Structure B. Tech Programme Syllabi B. Tech Programme Course Structure M. Tech Programme Syllabi M. Tech Programme
2 14 26 85 94
DEPARTMENT
OF
HISTORICAL PERSPECTIVE
1936 1942 1965 1969 Zakir Husain College of Engineering and Technology was established U. G. Course in Civil Engineering was started P. G. Courses in Civil Engineering was introduced Doctoral Program in Civil Engineering was started
INTRODUCTION
The Department of Civil Engineering in the Faculty of Engineering and Technology, has been constantly contributing to the cause of engineering education and training right since its inception in the year 1942. Over the last five decades, the department has grown manifold and shared immensely in the technology transfer and the propagation of technological advancements to the industry in particular and to the masses in general. With the changing technological order across the country and the globe, the department too, has maintained pace in becoming at par with the latest and most sophisticated R&D, design, testing, instrumentation and computation facilities etc. The training and education of the personnel in a wide range of fields has been a constant endeavor of the department over these years. The department has a very well qualified faculty supported by excellent laboratories and the state of the art computing facilities. The department owns a rich library having 9000 text and reference books. Many research projects sponsored by A.I.C.T.E., U.G.C., D.S.T., C.S.I.R., D.R.D.O., C.S.T. (U.P.), Ministry of Environment and Forest and Indian Oil Corporation, Govt. of India have been successfully completed in the past. The faculty members have published significant number of Research papers in International Journals, National Journals and the Proceedings of various International and National Seminars, Conferences, Symposia and Workshops. The faculty members have also published several textbooks and prepared an appreciable number of Technical Reports, Laboratory Manuals, and other Teaching Aids. The faculty members also have to their credit many awards such as Khosla Award, Suchit Kumar memorial Award, Institution of Engineers (I), Khosla Research Prize, ISET Best Paper award, Deshpande award (FM & FP, India), Jai Krishna Award, Sir Arthur Cotton Memorial Gold Medal to name a few. Many faculty members have chaired technical session of different National and International meets and have also been the members of the various technical committees within the country and abroad as well. The research publications of the faculty members have been widely cited and some of the faculty members are also the reviewers of International Journals. At the under graduate level,
5 the Civil Engineering Department offers B. Tech. (Civil) course and at the post graduate level M. Tech. course is offered in three major fields of specialization viz. Structural Engineering, Hydraulic Structures, and Environmental Engineering. At the Doctoral level, the Department offers Ph. D. in Structural Engineering, Hydraulic Structures, Environmental Engineering and Geotechnical Engineering. Zakir Husain college of Engineering and Technology is one among the seven institutes identified by M.H.R.D., Government of India, for the upgradation to the level of Indian Institute of Technology (I.I.T.). First installment of the grant for this purpose has already been received and the process of upgradation has begun with the upgradation of laboratories. The process of upgradation is expected to take five more years during which period the department is expected to become at par with I.I.T. The department of Civil Engineering is playing a major role in the development of infrastructure required for the purpose.
ACADEMIC PROGRAMMES
Name of the Programme B. Tech. (Civil Engg.) B. E. (Civil Eng.), Evening Course Structural Engg. M. Tech. Environmental Engg. Hydraulic Structures Ph. D. (Civil Engg.) Duration (years) 4 4 2 2 2 3 Intake 60 30 16 16 10 -
Structural Engineering
Fibre Composites and New Construction Materials Transient Dynamic Analysis of Structures Structural Masonry Experimental Stress Techniques and Non-Destructive Testing Numerical Modelling and Optimization Techniques Reliability Analysis and Risk Assessment of Structures Earthquake Resistant Low Cost Housing Wind Engineering Offshore Structures Corrosion Engineering Fly ash Utilization Instrumentation Technique, Application of Optical Fibre
Hydraulic Engineering
Sediment Transport and Flow Through Porous Media Hydraulic Structures Hydrology Computational Hydraulics
Geotechnical Engineering
Fly Ash Utilization and Disposal Ring/Annular/Shell and Pile Foundations Soil Structure Interaction and Environmental Geo-Technology Application of Geo-synthetics in Ground Improvement Techniques
Environmental Engineering
Hazardous and Solid Waste Management Physico Chemical Treatment Processes Corrosion Control
LABORATORIES
Structures
Structural Mechanics Laboratory Concrete Laboratory Structural Dynamics Laboratory Heavy Structures Laboratory Polymer Concrete Laboratory Composite Materials Laboratory Drawing Hall
Hydraulics Hydraulics U.G. Laboratory Hydraulics P.G. Laboratory Advanced Hydraulics Laboratory Environment
Environmental Engg. U.G. Laboratory Environmental Engg. P.G. Laboratory Env. Engg. Research Laboratory
Geotechnical Soil Mech. & Trans. Laboratory Engineering Geology Laboratory Surveying
Surveying Laboratory
FACULTY MEMBERS
Structural Engineering
Prof. V.P. Mital, B. Sc. Engg. (Aligarh), Ph. D. (U.K.) Prof. H. Abbas, B.Sc. Engg. (Aligarh), M.Sc. Engg. (Aligarh), Ph. D. (Roorkee) Mr. F. Ghani, B. Sc. Engg. (Aligarh), M.Sc. Engg. (Aligarh) Mr. S. A. Khan, B. Sc. Engg. (Aligarh), M.Sc. Engg. (Aligarh) Mr. S. A. Ali, B. Sc. Engg. (Aligarh), M.Sc. Engg. (Aligarh) Mr. T. Ahmad, B. Sc. Engg. (Aligarh), M.Sc. Engg. (Aligarh), Ph. D. (AMU) Dr. A. Baqi, B.Sc. Engg. (Aligarh), M.Sc. Engg. (Aligarh), Ph. D. (Roorkee) Dr. M. Arif, B. Sc. Engg. (Aligarh),M.Sc. Engg. (Aligarh), Ph. D. (Roorkee) Dr. T. Naqvi, B. Sc. Engg. (Aligarh), M.Sc. Engg. (Aligarh), Ph. D. (IIT-D) Dr. S. Ahmad, B. Sc. Engg. (Aligarh), M.E. (Roorkee), Ph.D. (Roorkee) Mr. A. Masood, B. Sc. Engg. (Aligarh), M.Sc. Engg. (Aligarh) Lt. F. Mehdi, B. Sc. Engg. (Aligarh), M.Sc. Engg. (Aligarh) Dr. M.S. Jafri, B. Sc. Engg. (Aligarh), M.Sc. Engg. (Aligarh), Ph. D. (IIT-D) Dr. A. Umar, B. Sc. Engg. (Aligarh), M.Tech. (IIT,D), Ph. D.(IIT-D) Dr. N. A. Siddiqui, B. Sc. Engg. (Aligarh), M.Sc. Engg. (Aligarh), Ph. D. (IIT-D) Mr. H. Irtaza, B. Sc. Engg. (Aligarh), M.Sc. Engg. (Aligarh) Mr. S. Akhtar, B. Sc. Engg. (BU), M.Sc. Engg. (Aligarh) Mr. I. K. Khan, B. Sc. Engg. (Aligarh), M.Sc. Engg. (Aligarh)
Hydraulic Engineering
Prof. M. Jamil, B. Sc. Engg. (Aligarh), M.E. (Roorkee) Prof. R.U. Khan, M.E. (Roorkee), D.I.P.H.E. (Netherlands) Dr. M. Muzammil, B. Sc. Engg. (Aligarh), M.Tech. (IIT-K), Ph.D. (IIT-K) Dr. S.A. Ansari, B. Sc. Engg. (Aligarh), M.Sc. Engg. (Aligarh), Ph. D. (Roorkee) Dr. M. Athar, B. Sc. Engg. (Aligarh), M.E. (Roorkee), Ph .D. (Roorkee) Dr. T. Mansoor,), B. Sc. Engg. (Aligarh), M.Sc. Engg. (Aligarh), Ph .D. (Roorkee) Mr. M. Beg, B. Sc. Engg. (Aligarh), M.Sc. Engg. (Aligarh) Mr. M.A. Ansari, B. Sc. Engg. (Aligarh), M.Sc. Engg. (Aligarh)
Geotechnical Engineering
Prof. S.S. Shah, B. Sc. Engg. (Aligarh), M.Sc. Engg. (Aligarh), Ph.D. (Aligarh) Mr. M.S. Ahmad, B. Sc. Engg. (Aligarh) ,M.Sc. Engg. (Aligarh) Mr. M.A. Khan, B. E. (Aligarh), M.Sc. Engg. (Aligarh) Dr. M.M. Alam, B. Sc. (Aligarh), M.Sc. (Aligarh), Ph.D. (Aligarh)
Environmental Engineering
Prof. P.A. Saini, B. Tech. (IIT,K), M.Tech. (IIT,K), Ph.D. (IIT,K) Prof. M.M. Ashhar, B. Sc. Engg. (Aligh.), M.Sc. Engg. (Aligarh) Dr. N.A Khan, B. Sc. Engg. (Aligarh), M.Sc. Engg. (Aligarh), Ph.D. (Roorkee) Dr. I.H. Farooqui, B. Sc. Engg. (Aligarh), M.Sc. Engg. (Aligarh), Ph. D. (Aligarh) Mr. A.A. Siddiqui, B. Sc. Engg. (Aligarh), M.Sc. Engg. (Aligarh) Mr. N. Khaleel, B. Sc. Engg. (Aligarh), M.Sc. Engg. (Aligarh)
10
ACHIEVEMENTS
Publications
Publications in International Journals National Journals International Conferences National Conferences Last Five Years (2000-05) 45 43 72 98
Research Guidance
Level M. Tech. Produced Ph. D. Produced Ph. D. in progress Last five Years (2000-05) 130 3 15
11
Recognitions
Visiting Professor, University of Liverpool Chaired Technical Sessions of International/National Conferences Member of various Technical Committees Reviewer of International Journals Invited Lectures
Others
Citations in Journals Research Projects Completed (Last 5 yrs.) 13 (Total Grant = 106.4 Lakhs) Conferences/Workshops/ Courses Organised (Last 5 yrs.) Monographs, Teaching Aid Developed Software Packages Developed Consultancy Projects Completed 135 FIST grant of Rs. 40 Lakhs from DST 26 04 04 04
12
FUTURE TARGETS
To upgrade and modernise existing laboratories To start following new courses:
o o o o o M. Tech. M. Tech. M. Tech. M. Tech. M. Tech. (Disaster Mitigation) (Environmental Biotechnology) (Water Resource Management) (Geotechnical Engineering) (Construction Management) by 2007 by 2007 by 2008 by 2008 by 2008
13
CHAIRMEN OF DEPARTMENT
S. No. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. Name Khan Bahadur Abdur Rahman Khan Dr. M. S. Qureshi Mr. Sher Ali Ismaili Prof. F. M. P. Arbuthonot Dr. K. C. Chakko Khan Bahadur Hamidullah Khan Prof. M. Ather Dr. K. C. Chakko Prof. M.Y. Ansari Prof. Rasheeduzzafar Prof. S. M. Masjood Hasan Prof. M.Y. Ansari Prof. Rasheeduzzafar Prof. Shameem Ahamd Prof. M.Y. Ansari Prof. S. M. Masjood Hasan Prof. Shameem Ahmad Prof. Aslam Qadeer Prof. Mohd. Haroon Prof. Roshan A. Khan Prof. Alimul Qadar Prof. R. D. Gupta Prof. V. P. Mital Prof. S. Qaiser A. Naqvi Prof. Mohd. Jamil Period 1942-43 1944-45 1945-48 1948-49 1950-54 1954-58 1958-59 1959-61 1961-71 1971-72 1972-73 1973-75 1975-77 1977-81 1981-84 1984-87 1987-90 1990-93 1993-93 1993-93 1993-96 1996-99 1999-02 2002-05 2005-
14
15
Course Structure
B. Tech. Programme
in
Civil Engineering
Under semester system effective for the students admitted in the Session 2005-2006 & onward
16
1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
EN-101 AP-101 AC-101 AM101 EE-101 ME-101 ME-103 AP-191 AC-191 ME-191
English Applied Physics-I Applied Chemistry-I Applied Mathematics-I Basic Electrical Engineering Thermal Sciences Engg. Mechanics Applied Physics Lab.-I Applied Chemistry Lab.-I Manufacturing Process Lab-I TOTAL
25 25 25 25 25 25 25 -
17
1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
CO-101 AP-102 AC-102 AM.102 EL-101 ME-102 CE-101 AP-192 AC-192 ME-192
Computer and Programming Applied Physics-II Applied Chemistry-II Applied Mathematics-II Basic Electronics Engineering Engg. Graphics Strength of Material Applied Physics Lab.-II Applied Chemistry Lab.-II Manufacturing Process Lab-II TOTAL
25 25 25 25 25 20 25 -
18
1. 2. 3. 4. 5. 6. 7. 8. 9.
Mathematics - III Civil Engineering Materials Fluid Mechanics Environmental Science Engineering Geology Civil Engg. Materials Lab. Fluid Mechanics Lab. Geology Lab. Drawing & Estimating TOTAL
25 25 25 25 25 -
19
Economics & Management Mathematics - IV Structural Mechanics Construction Practice Surveying I Hydrology Structural Mechanics Lab. Surveying Lab. I Engg. Geology Camp TOTAL
25 25 25 25 25 25 -
20
Design of Concrete Structures I CE-312 Soil Mechanics CE-313N Environmental Engineering CE-314 Surveying - II CE-xxx DE-I CE-xxx DE-II CE-391 Soil Mechanics Lab. CE-392 Environmental Engg. Lab. CE-393 Surveying Lab. II CE-394 Survey Camp TOTAL
25 25 25 25 25 25 -
21
Communication 2 Skills CE-315 Structural Analysis-I 3 CE-316 Engineering 3 Hydraulics - I CE-317 Transportation 3 Engineering CE-318N Design of Steel 3 Structures CE-xxx DE - III 3 CE-395 Structures Lab. CE-396 Hydraulics Lab. CE-397N Transportation Engg. Lab. TOTAL 17
20 25 25 25 25 25 -
22 S. No 1. 2. 3. 4. 5. 6. 7. 8. 9. Course Category DC DC DE DE OE DC DC DC DC Course No. CE-411 Course Title Periods per Week L T P*/ D 3 1 3 3 3 3 1 1 1 1 1 2 2 2 Credits (Cr) 4 4 4 4 4 3** 1 1 1.5 Course Work Marks 15 15 15 15 15 30 60 60 100 MidSem. Exam
Marks
Design of Concrete Structures II CE-413 Foundation Engineering CE-xxx DE IV CE-xxx DE V OE I CE-490A Project (Contd.) CE-491N Concrete Design Practice CE-492N Steel Design Practice CE-498N Vocational Training
25 25 25 25 25 -
TOTAL 16 7 4 26.5 *Design period **Incomplete grade (I) is to be assigned to the students, which will be converted to regular grade at VIII Semester Level
23
Construction Management Engineering Hydraulics - II Irrigation Engineering DE - VI OE - II Irrigation Design of Works Project TOTAL
25 25 25 25 25 -
24
(A) Departmental Electives (DE) for the students of B. Tech (Civil Engineering)
Sem-esterSem V Elective Designation DE-I Course No. CE-421 CE-422 CE-423 CE-424 CE-425 CE-426 CE-427 CE-428 CE-429 VII DE-IV DE-V CE-430 CE-431 CE-432 CE-433 Course Title Sem-esterSem VII Concrete Technology Ecology & Environment Traffic Engineering Ground Water Engg. Advanced Hydrology Environmental Pollution Abatement Geo-Engg. of Rock & Rock Masses Dam Engineering Industrial Pollution Control Structural Analysis II Reliability Analysis of Structures Water Power Engineering Advanced Highway Engg. Elective Designation DE-V Course No. CE-434 CE-435 Course Title
DE-II VI DE-III
VIII
DE-VI
Bridge Engineering Design of Energy Dissipaters CE-436 Sediment Transport CE-437 Pre-stressed Concrete CE-438 Advanced Structural Analysis CE-439 Industrial Structures CE-440 Advanced Hydraulic Structures CE-441 Advanced Foundation Engineering CE-442 Advanced Environmental Engg. CE-443 River Engineering CE-444 Disaster Management CE-445N Elements of E.Q and Wind Engineering
25
26 Semester/Class II Sem B.Arch. III Sem B.Arch. III Sem B. Arch. IV Sem B.Arch. IV Sem B.Arch. V Sem B.Arch. V Sem B.Arch. VI Sem B.Arch. VI Sem B.Arch. VII Sem B.Arch. VII Sem B. Arch. VIII Sem B.Arch. Course No CE-101 CE-212 CE-291N CE-218 CE-295 CE-312 CE-311 CE-315 CE-318N CE-411 CE-413 CE-410 Course Title Strength of Materials Civil Engineering Materials Civil Engineering Materials Lab. Surveying -I Surveying Laboratory - I Soil Mechanics Design of Concrete Structures I Structural Analysis-I Design of Steel Structures Design of Concrete Structures-II Foundation Engineering Construction Management L 3 3 3 3 3 3 3 3 3 3 Pds/Week T P/D 1 1 3 1 3 1 1 1 1 1 1 1 Credits (Cr) 4 4 1.5 4 1.5 4 4 4 4 4 4 4
Breakup of Credits
Semester
I & II III IV BS 26 4 4 ESA 29 13 1
Course Category
DC 8.5 19 DE OE HM 4 4 Total 59 25.5 28
27 V 21 8 29 VI 20 4 4 28 VII 14.5 8 4 26.5 VIII 12 4 4 4 24 Total 34 43 95 24 8 16 220 BS = Basic Sciences, ESA=Engineering Science and Arts, DC=Departmental Core, DE=Departmental Elective, OE=Open Elective, HM=Humanities
28
29
II Semester
CE 101 Strength of Materials
Course Category : DC L - T -.P : 3 - 1 0 Credit : 4 Unit 1 Analysis of stress and strains; Elastic and plastic behaviour of engineering materials; Mechanical properties; Analysis of simple state of stress and strain; Elastic constants, Examples of the state of tension, compression and shear. Unit 2 Analysis of two and three-dimensional stresses and strains; Analytical and graphical methods; Principal stress and strain; Introduction to failure criteria Unit 3 Analysis of determinate structures; Bending moment and shear force for single span; Overhanging and cantilever beams, Relationship between rate of load, bending moment and shear force. Unit 4 Stresses in beams; Bending stresses in symmetrical sections, solid thin walled and composite sections, Efficiency of shapes, Shearing stress in symmetrical sections; Unsymmetrical sections, solid thin walled and composite section. Unit 5 Torsion; Relation between twisting moment, shear stress and angle of twist, Torsion in circular shaft, Torsion in non circular sections, Engineers approach; Unsymmetrical bending and shear center. Text/Reference Books: 1. Popov, E., Engineering Mechanics of Solids, PHI, Delhi, India. 2. Timoshenko, S. and Young, D. H., Elements of Strength of Materials, DVNC, New York. 3. Kazmi, S. M. A., Solid Mechanics TMH, Delhi, India.
30
III Semester
CE 212 Civil Engineering Materials
Course Category : DC L - T -.P : 3 - 1 - 0 Credit : 4 Unit 1 Cement and Aggregates: Methods of manufacturing of cement and its chemistry; Kinds of cement and their properties; Hydration mechanism, Testing of cement; Grading, Shape and texture of aggregates; properties of aggregates. Unit 2 Properties of fresh concrete: Tests on fresh and hard concrete; Factors affecting strength of concrete; Durability of concrete, Introduction to mix design IS code method. Unit 3 Bricks: Constituents of brick earth and their properties; Manufacture of bricks, classification and tests for quality control; Properties of masonry units and masonry mortar; Stone their types and uses; Classification of lime, setting of lime, Specifications Unit 4 Timber: Structure and characteristics of hard and soft wood; Engineering applications; Defects in timber, Seasoning, preservation, fire proofing; Plywood, black boards and fire boards; Steel; types and mechanical properties (ductility and strength) of mild steel, cold worked steel etc.; Effect of heat and fire resistance. Unit 5 Properties and uses of Glass, Asbestos, Bitumen, Plastics etc.; Industry and environment, use of waste; Alternative and non standard construction materials. Text / Reference Books: Naville, A.M., Properties of Concrete, Longman, Naville, A.M., Concrete Technology, Longman, Gambhir, M. L., Concrete Technology, TMH, New Delhi, India. Singh, S., Engineering Materials, Konark, Delhi, India.
31
Unit 2
Unit 3
Unit 4
Text /Reference Books: 1. P.N. Modi and S.N. Seth, Hydraulics and Fluid Mechanics, Standard Book House, Delhi, India. 2. S. Ramamnitham, Hydraulics and Fluid Mechanics, Dhanpat Rai & Sons, Delhi, India. 3. Shames, Mechanics of fluids, Mc Eraw-Hill, Auckland, N. Land. 4. V.L. Streeter, Fluid Mechanics, Mc Graw-Hill, N.Y.,USA. 5. R.J. Garde, Fluid Mechanics RPH, Roorkee, India.
32
33
34 4. P.D., Krynine and W.R. Judd, Principles of Engineering Geology and Geo techniques, CBS Pubs. New Delhi.
BIS Codes: 5. 6. 7. 8. IS : 1125, Determination of weathering of natural building stones BIS, Govt. of India. IS : 1126, Determination of durability of natural building stones. BIS, Govt. of India IS : 7422, Part I to V (1974), Symbols and abbreviations for use in Geological maps, sections, subsurface exploratory logs. BIS, Govt. of India. IS : 1893,(1984), Criteria for earthquake resistance design. BIS, Govt. of India.
35
36
37
IV Semester
CE 216 Structural Mechanics
Course Category: ESA L - T- P: 3 - 1 - 0 Credits: 4.0 Unit 1 Analysis of statically determinate trusses; Stability of dams, retaining walls and chimneys; Stress analysis of thin, thick and compound cylinder Unit 2 Generalized state of stress and strain: Stress and strain tensor, Yield criteria and theories of failure; Tresca, Von-Mises, Hill criteria, Heigh-westerguards stress space. Unit 3 Deflection of beams; Load deflection relationship of beam, Deflection calculation by double integration, moment area and conjugate beam methods. Unit 4 Energy methods; Strain energy, elastic, complementary and total strain energy, Strain energy of axially loaded bar, Beam in bending, shear and torsion; General energy theorems, Castiglianos theorem, Maxwell Betties reciprocal theorem; Virtual work and unit load method for deflection, Application to problems of beams and frames. Unit 5 Structural stability; Stability of columns, Eulers formula, end conditions and effective length factor, Columns with eccentric and lateral load. Text/Reference books 1. Norris, C.H. and Wilber, J. B. and Utku, S. Elementary Structural Analysis Mc Graw Hill, Tokyo, Japan. 1. Timoshenko, S. and Young, D. H., Elements of Strength of Materials, DVNC, New York, USA. 2. Kazmi, S. M. A., Solid Mechanics TMH, Delhi, India.
38
39
CE 218 Surveying - I
Course Category : DC L - T -.P : 3 - 1 - 0 Credit : 4 Unit 1 Surveying; fundamental definition and concepts, objects, classification, basic principles, plans and maps; Chain surveying, definition, methods, instruments for chaining, ranging out survey lines, chaining, errors due to incorrect chain; offsets, booking of field notes; Basic problems in chaining, obstacles in chaining; Conventional symbols. Unit 2 Compass surveying; bearing and angles, compass traversing, adjustment of compass traverse, graphical methods; magnetic declination, local adjustment; Plane table surveying; plane table and its accessories, working operations, methods of plane tabling, two point and three point problems. Unit 3 Levelling; definition, instruments, methods of levelling, theory of direct leveling, spirit leveling, differential levelling, curvature and refraction, reciprocal leveling, profile leveling, crosssectioning,, Barometric leveling,; Sensitiveness of bubble tube, permanent adjustment of level Unit 4 Theodolite and traverse surveying; essential parts of transit theodolite, temporary and permanent adjustment of transit theodolite; Measurement of horizontal and vertical angles; Methods of traversing, closing error, balancing of traverse, traverse table, omitted measurements, Tachometry, stadia system, influence of staff tilt, anallatic lens, tangential and subtense systems. Unit 5 Areas and volumes; computation of area by trapezoidal and Simpsons rule, area of closed traverse Measurement of volume from cross sections, capacity of reservoirs, setting out works. Text/Reference books 1. Kanetkar, T. P., Surveying and Levelling Vol I and II, Pune Vidyarthi Griha Prakashan, Pune, India. 2. Punmia, B. C., Surveying Laxmi Publications, Delhi, India.
40
CE-219 Hydrology
Course Category : DC L-T-P:3-1-0 Credit : 4 Unit 1 Scope and applications of hydrological cycle, Hydrology applied in Engineering, Precipitations types and measurement, Rain gauge, Network analysis of rainfall data. Unit 2 Evaporation, Evapo-transpiration, Consumptive use, infiltration and percolation, methods of determination, factors affecting. Unit 3 Surface runoff, factors affecting, measurement of runoff, Analysis of runoff data, Hydrographs, Mass curve and Flow duration curve, Concept of Unit Hydrograph, Methods of Estimation of Unit Hydrograph, Derivation and application. Ground Water Hydrology, Definitions, Types of Aquifers and Wells, Occurences, Distribution, Darcys law and its limitations, Well hydraulics.
Unit 4
Text / Reference Books: 1. K. Subramanya, Engineering Hydrology, TMH, New Delhi, India. 2. Chow V.T,.Hand book of Applied Hydrology, Mc Graw-Hil, N.Y., USA. 3. Wister, and Kohler and Paulhus, Hydrology, McGraw Hill, Tokyo, Japan. 4. Linsley, Kohler and Paulhus, Applied Hydrology, Mc Graw Hill, N.Y., USA. 5. D.K Todd, Groundwater Hydrology , John Wiley, N.Y., India. 6. J. Nemec, Engineering Hydrology, Mc Graw-Hill, N.Y., India.
41
L - T -.P : 0 - 0 - 3
Credit : 1.5
1. 2. 3. 4. 5. 6.
Determination of Impact value Determination of Elastic constants and plotting load-deflection curve under transverse loading. Buckling of Columns and test on long columns with different end conditions. Verification of bending moment in Beams Torsion of circular shafts, torque-twist behaviour Determination of Brinnel Hardness Number (BHN)
42
V Semester
CE 311 Design of Concrete Structures I
Course Category: ESA L - T- P: 3 - 1 - 0 Credits: 4.0 Unit 1 Load and stresses, load combinations, Working stress and limit state approach. Analysis and design of sections in bending working stress and limit state method, Rectangular and Tsections, Beams with reinforcement in compression, One-way slab. Unit 2 Design for shear and bond, Mechanism of shear and bond failure, Design of shear using limit state concept, Development length of bars; Design of sections in torsion. Unit 3 Design of two-way slabs, Rankines-Grashoff and I.S. code method; Design of flat slab direct method; Circular slab; Slab type staircase, Placement of reinforcement in slabs; Voided slab. Unit 4 Design of compression members, Short column, Columns with uni-axial and bi-axial bending; Long columns, use of design charts. Unit 5 Design of foundation; Wall footing, Isolated and combined footing for columns. Text Book 1. Jain, A. K. Reinforced concrete- limit State Design NCB, Roorkee, India. Reference Books 1. Karve and Shah Limit State Theory and Design of Reinforced Concrete VGP, Pune, India. 2. Pillai and Menon Reinforced Concrete Design, TMH, New delhi, India. 3. Verghese, P. C. Advanced Reinforced Concrete Design PHI, Delhi, India 4. Winter, G. Design of Concrete Structures Mc Graw Hill, Tokyo, Japan. 5. Evans and Cook Reinforced and Pre- stressed Concrete TN, London, U.K.
43 Selected B. I .S Codes 1. I. S.:456-2000-Code of Practice for Plain and Reinforced Concrete, BIS, New Delhi, India. 2. I. S.:875 -1987(Part I & II)-Code of Practice for Design Loads(other than earthquake) for Building and Structures, BIS, New Delhi, India. 3. I.S.:1893-1984-Criteria for Earthquake Resistant Design of Structures, BIS, New Delhi, India. 4. I.S.:4326-1993-Code of Practice for Earthquake Resistant Design and Construction of Buildings, BIS, New Delhi, India. 5. I.S.:13920- Ductile detailing of reinforced Concrete Structures subjected to Seismic forces, BIS, New Delhi, India. 6. S.P.:16 -Design Aids for Reinforced Concrete to IS:456, BIS, New Delhi, India. 7. S.P.:24 -Explanatory Hand Book of I.S. Code for Plain and Reinforced Concrete, BIS, New Delhi, India. 8. S.P.:34 - Hand Book of Concrete Reinforcement and Detailing, BIS, New Delhi, India.
44
45
46
CE 314 Surveying - II
Course Category: ESA L - T- P: 3 - 1 - 0 Credits: 4.0 Unit 1 Elementary photogrammetry; terrestrial and aerial photogrammetry, aerial photographs, scale of vertical photographs; Stereoscopy and parallax; Relief displacement; Flight planning, plotting instruments; Hydrographic surveying, shoreline survey; Sounding, methods of locating soundings, reduction of sounding, discharge measurement. Unit 2 Triangulation, classification of triangulation system, triangulation figures, signals and towers, phase of signal inter visibility and height of stations, base line measurement, use of EDM instruments, corrections to measured length; Measurement of horizontal angles; satellite stations, reduction to center; Trigonometrical levelling. Unit 3 Curves, simple, compound, reverse, transition and vertical curves. Unit 4 Errors and adjustment of observation; laws of accidental errors, probability curve, principle of least squares, Laws of weights, probable and standard error, distribution of error to field measurements, determination of most probable values, methods of normal equations and correlates, station and figure adjustment. Unit 5 Field astronomy, definition of astronomical terms, formulae of spherical trigonometry, astronomical triangles, co-ordinate systems, measurement of time, determination of azimuth and latitude. Text Book 1. Kanetkar, T. P., Surveying and Levelling Vol. I and II, Pune Vidyarthi Griha Prakashan, Pune, India Reference Books 1. Punmia, B. C., Surveying Vol. I and II, Laxmi Publications, Delhi, India. 2. Clark and David, Plane and Geodetic Surveying Vol. I and II, Constable and Company Ltd., U.K. 3. Norman, T. Surveying Edward Arnold, U.K.
47
48
49
VI Semester
CE 315 Structural Analysis - I
Course Category: ESA L - T- P: 3 - 1 - 0 Credits: 4.0 Unit 1 Indeterminate structures; Static and kinematic indeterminacy, Analysis of indeterminate beams, moment area method, Effect of yielding of supports, Consistent deformation method, Three moment theorem. Unit 2 Displacement methods; Slope deflection method, Moment distribution method, Application to continuous beam, non-sway and sway frames. Unit 3 Analysis of indeterminate pin jointed perfect and redundant frames. Unit 4 Three hinged, two hinged and fixed arches, analysis by energy and force method. Unit 5 Analysis of cables and suspension bridges, Two hinged and three hinged stiffening girders Text Books 1. Reddy, C. S., Basic Structural Analysis TMH, Delhi, India. Reference Books .1 Vazirani and Ratwani, Basic structural analysis Khanna, Delhi, India. .2 Punmia, B. C., Strength of Material and Mechanics of Structures Vol. I&II, Laxmi pubs. India. .3 Gupta, Pandit and Gupta, Theory of structures Vol. I &II
50
51
52
53
54
VII Semester
CE 411 Design of Concrete Structures II
Course Category: ESA L - T- P: 3 - 1 - 0 Credits: 4.0 Unit 1 Design of continuous beams and building frames, Moment redistribution, Estimation of wind and seismic loads, Desirable features of earthquake resistant construction, Detailing for earthquake resistant construction ductility criteria Unit 2 Water tank and staging; Introduction, Design criteria, Design of rectangular and circular water tank, Design of Intze tank, Staging for overhead tank Unit 3 Introduction to bridge engineering, Investigation for bridges, IRC loadings, Design of slab culvert; Design of Masonry walls and columns Unit 4 Pre-stressed concrete, Introduction, pre-stressing system, losses in pre-stress, Design of simple span girders, Design of end block Unit 5 Design of staircases; Design of cantilever and counter-forte type retaining wall Text Book 1. Jain, A. K. Reinforced concrete- limit State Design NCB, Roorkee, India. 2. Raju, N.K. Pre-Stressed Concrete TMH, Delhi, India. Reference Books 1. Karve and Shah Limit State Theory and Design of reinforced Concrete VGP, Pune, India. 2. Pillai and Menon Reinforced Concrete Design TMH, New delhi, India.. 3. Verghese, P. C. Advanced Reinforced Concrete Design PHI, Delhi, India. 4. Winter, G. Design of Concrete Structures Mc Graw Hill, Tokyo, Japan. 5. Evans and Cook Reinforced and Pre- stressed Concrete TN, London, U.K.
55 Lin, T. H. and Burns, H. N., Design of Pre-Stressed Concrete Structures, Wiley, Canada. Selected B. I .S Codes 1. I. S.:456-2000-Code of Practice for Plain and Reinforced Concrete, BIS, New Delhi, India. 2. I. S.:875 -1987(Part I & II)-Code of Practice for Design Loads(other than earthquake) for Building and Structures, BIS, New Delhi, India. 3. I.S.:1893-1984-Criteria for Earthquake Resistant Design of Structures, BIS, New Delhi, India. 4. I.S.:4326-1993-Code of Practice for Earthquake Resistant Design and Construction of Buildings, BIS, New Delhi, India. 5. I.S.:13920- Ductile detailing of reinforced Concrete Structures subjected to Seismic forces, BIS, New Delhi, India. 6. S.P.:16 -Design Aids for Reinforced Concrete to IS:456, BIS, New Delhi, India. 7. S.P.:24 -Explanatory Hand Book of I.S. Code for Plain and Reinforced Concrete, BIS, New Delhi, India. 8. S.P.:34 - Hand Book of Concrete Reinforcement and Detailing, BIS, New Delhi, India. 9. I.S.:1343-1980-Code of Practice for Pre-Stressed Concrete, BIS, New Delhi, India. 6.
56
57
58
VIII Semester
CE 410 Construction Management
Course Category: ESA L - T- P: 3 - 1 - 0 Credits: 4.0 Unit 1 Financial analysis; Cost of project, means of finances, planning the means of finances, depreciation, PWD accounts Unit 2 Resource Management; Basic concepts, labour requirements, labour productivity, site productivity, non-productive activities, Equipment management, Material management Unit 3 Factors affecting the selection of construction equipments, brief description of bulldozers, scrapers, concrete mixers and sprinklers Unit 4 Introduction to CPM, critical path, study of various floats, construction of networks, event, activity time computations, project time evaluation. Unit 5 Cost control for normal and crash time networks, probability of completion of project based on PERT time estimates; Linear programming- Simplex method Text / Reference Books 1. Antil and Woodhead, Critical Path Methods in Construction Practice, Jhon Wiley, NY, USA. 2. Purifoy, Construction Planning, equipments and Methods, Mc Graw Hill, Tokyo, Japan. 3. Sengupta, B, and Guha, H., Construction Management and Planning, TMH, New Delhi, India.
59
60
CE 490 Project
Course Category : DC L - T -.P : 1 - 2 - 0 Credit : 3 Any suitable topic with the aim of providing training in the areas of analysis, design, development of new ideas in civil engineering, including collection of data, making drawings, cost estimate and writing report.
DEPARTMENTAL ELECTIVES
CE 421 Concrete Technology
Course Category : DE I L - T -.P : 3 - 1 - 0 Credit : 4 Unit 1 Concrete; Properties of ingredients, tests, Production of concrete, mixing, compaction curing, Properties of fresh concrete; Defects in Concrete, Concrete additives. Unit 2 Behavior of concrete in tension and compression, shear and bond, Influence of various factors on test results, Time dependent behavior of concrete -creep, shrinkage and fatigue. Unit 3 Concrete mix design; Proportioning of concrete mixes, basic considerations, cost specifications, factors in the choice of mix proportion, different method of mix design. Quality control, Behavior of concrete in extreme environment; temperature problem in concreting, hot weather, cold weather and under water conditions, Resistance to freezing, sulphate and acid attack, efflorescence, fire resistance Unit 4 Inspection and testing of concrete- Concrete cracking, types of cracks, causes and remedies Non destructive tests on concrete; Chemical tests on cement and aggregates. Unit 5 Special concrete; types and specifications, Fibre reinforced and steel Fibre reinforced concrete, Polymer concrete, Use of admixtures; Deterioration of concrete and its prevention Repair and rehabilitation. Text / Reference Books 1. Naville, A.M., Properties of Concrete, Longman, India. 2. Naville, A.M., Concrete Technology, Longman, India. 3. Gambhir, M. L., Concrete Technology, TMH, New Delhi, India.
62
63
64 3. 4. Subhash C. Saxsena, A course in Traffic Planning and design, Dhanpat Rai Sons, Delhi, India. Louis J. Pignatro, Traffic Engineering Theory and Practice Printice- Hall, New Jersey, USA.
65
66
67
68 F.G., Bell, Fundamentals of Engineering Geology, Aditya Pubs. Delhi M.P.Billings, Structural Geology, PHI Pubs., New Delhi, India. B.,Singh and R.K., Goel, Rock Mass Classification for Civil Engg., Elsevier, Amsterdam. B.P., Verma, Rock Mechanics for Engineers, Khanna Pubs., New Delhi, India. BIS Codes: IS : 7422, Part I to V (1974), Symbols and abbreviations for use in Geological maps, sections, subsurface exploratory logs. BIS, Govt. of India.BIS, Govt. of India. IS : 12070 (1987), Shallow Foundation on Rocks, BIS, Govt. of India. IS :13365 (1998), Part I & II, quantitative classification of rock mass rating and rock mass quality prediction for support in underground opening. BIS, Govt of India.
69
70
71
72
73
74
Unit 1 Pavement Design: Design wheel loads, CBR, McLeod and Stabilometer methods for flexible pavement design. Modified Westergaards analysis, Bradburys work and IRC recommendations for design of rigid pavements. Unit 2 Hill Roads: General consideration, alignment and geometries of hill roads, Design and construction of hill roads. Unit 3 Highway Drainage: Importance of highway drainage, surface and sub-surface drainage, construction of roads in water logged areas, Drainage of slopes and erosion control. Unit 4 Highway Maintenance: Causes and types of pavement failure, maintenance of flexible and rigid pavements, strengthening of existing pavement. Text / Reference Books 1. G. V. Rao, Principles of Transportation and Highway Engineering, Tata McGraw-Hill Publishing Company Limited, New Delhi, India. 2. S. K. Khanna and Justo, C. E. G., Highway Engineering, Nemi Chand & Bros.Roorkee, India.
75
76 Text / Reference Books: 1. Elevators Ki, Hydraulic Energy dissipations, Mc Graw-Hill, N.Y., USA.
77 Text Book / Reference Book 1. Raju, N.K. Pre-Stressed Concrete TMH, Delhi, India. 2. Lin, T. H. and Burns, H. N., Design of Pre-Stressed Concrete Structures, Wiley, Canada. 3. I.S.:1343-1980-Code of Practice for Pre-Stressed Concrete, BIS, New Delhi, India.
78
Unit 3 Chimneys; Loads and stresses in chimney shaft, Earthquake and wind effect, Stresses due to temperature difference, combined effect of loads and temperature, temperature. Design of chimney; Silos and Bunkers; Jassens theory, Airys theory, Shallow and deep bins, Rectangular bunkers with slopping bottom, Rectangular bunkers with high side walls; Steel stacks; introduction, force acting on a steel stack, design consideration, design example of stacks. Unit 4 Concrete Shell Structures: Folded plate and cylindrical shell structures; Introduction, structural behaviour of long and short shells, beam and arch action, analysis and design of cylindrical shell structures, Analysis and design of folded plates. Unit 5 Machine foundations; introduction, machine vibration, structural design of foundation to rotary machines, impact machines, vibration characteristics, design consideration of foundation to impact machine, grillage, pile and raft foundation.
79
80
81
82 1. 2. W.H. Graf, Hydraulics of Sediment Transportation, Mc. Graw-Hill, N.Y., USA. R J Garde and K G Rangaraju, Sediment Transport and Alluvial river Problems, Wiley,New Delhi, India.
83
OPEN ELECTIVES
CE - 481 Fundamentals of Environmental Engineering
Course Category: OE L - T - P: 3 - 1 - 0 Credits: 4.0
Fundamentals of chemistry concepts in Environmental Engineering, Fundamentals of Microbiology in Environmental Engineering, Fundamentals of physico chemical and biological processes of water and wastewater treatment, Mass balance and energy balance approach, Environmental Pollution and standards air, water, land and noise Text / Reference Books: 1. Howard S. Peavy, et. Al., Environmental Engineering McGraw-Hill Book Co. 2. Sawyer and McCarty, Chemistry for Environmental Engineering McGraw-Hill Book Co. 3. McKinney, Microbiology for Sanitary Engineers McGraw-Hill Book Co.
84
85 1. 2. 3. 4. 5. 6. Mathur, P. M. 1998: Computer Processing of Remotely-Sensed Images., John Wiley and Sons, UK. Campbell, J. B. 1996: Introduction to Remote Sensing., IInd Edition, Taylor and Francis, London. Paine, D.P., 1981: Aerial Photography and Image Interpretation for Recourse Management,., John Wiley. Sabins, F.F., 1985: Remote Sensing Principles and Applications., Freeman. Lillesand, T. M. and Keiffer, R.W., 1987: Remote Sensing and Image Interpretation., John Wiley Moffit, F. H. and Mikhail, E. M., 1980: Photogrammetry, Harper and Row
86
87
Course Structure
M. Tech. Programme
in
Civil Engineering
88
89
Course Course Title No. Third Semester CE - 701 Earthquake Resistant Design of Structures CE - 790 Seminar-I CE - 791 Lab./Project CE - 792 Dissertation (Preliminary) Total Fourth Semester CE - 792 Dissertation CE - 793 Seminar-II* Total * Related to Dissertation Work Grand Total for the whole course (4-semesters)
4 4 52
1 1 13
2 6 8 2 2 10
90
LIST OF ELECTIVES for M. Tech in STRUCTURAL ENGINEERING Course Course Title Course Course Title No. No. CE - 641 Advanced Soil Mechanics and CE - 646 Offshore Structures Foundation Engineering CE - 642 Advanced Construction Materials CE - 647 Building Services CE - 643 Stability Analysis of Structures CE - 648 Disaster Mitigation and Management CE - 644 Tall Buildings CE - 649 Reliability Based Design CE - 645 Advanced Bridge Design CE - 650 Design of Industrial Structures
91
92
Course Course Title No. Third Semester CE - 711 Spillways and Energy Dissipaters CE - 790 Seminar-I CE - 794 Lab./Project CE - 795 Dissertation (Preliminary) Total Fourth Semester CE - 795 Dissertation CE - 796 Seminar-II Total Grand Total for the whole course (4-semesters)
Sessional University Exam. Marks Theory P/V 25 50 60 100 235 150 150 685 75 75 975 40 40 100 50 150 190
4 4 50
1 1 11
2 6 8 2 2 14
LIST OF ELECTIVES Course No. Course Title CE - 601 Higher Numerical Analysis CE - 609 Construction Planning and Management CE - 621 Water Reclamation and Reuse CE - 625 Air Pollution Control
Course No. Course Title CE - 662 Water Resources Engineering CE - 663 Experimental Methods in Fluids CE - 664 Hydrogeology and Ground Water Modeling CE - 685 Solid and Hazardous Waste
94 Total Course Course Title No. Third Semester CE - 721 Water Treatment Plant Design and Operation CE - 790 Seminar-I CE - 797 Lab./Project CE - 798 Dissertation (Preliminary) Total Fourth Semester CE - 798 Dissertation CE - 799 Seminar-II Total Grand Total for the whole course (4-semesters) 22 L 5 T 5 P 150 450 600 Total Marks 100 50 100 100 350 250 50 300 1850
Sessional University Exam. Marks Theory P/V 25 50 60 100 235 150 150 685 75 75 975 40 40 100 50 150 190
4 4 48
1 1 10
2 4 6 2 2 17
95
LIST OF ELECTIVES for M. Tech. in ENVIRONMENTAL ENGINEERING Course No. Course Title Course No. Course Title CE - 601 Higher Numerical Analysis CE - 685 Solid and Hazardous Waste Management CE - 681 Dispersion and Effects of Pollution CE - 686 Environmental Policies and Impact In Environment Analysis CE - 682 Statistical Procedures in CE - 687 Industrial Water Treatment and Corrosion Environmental Monitoring Control CE - 683 Instrumental Methods for CE - 688 Anaerobic Technology for Waste water Environmental Analysis Treatment CE - 684 Environmental Toxicology
96
97
98
II - Semester
CE 606 Finite Element Analysis
(L-T-P : 4-1-0) Sessional : 25 marks University Exam: 75 marks Introduction, various types of finite elements, parametric and local coordinates, discretization, energy and variational approaches, convergence criteria, Applications: plane stress and plane strain problems; axisymetric solids, plate and shell structures, field problems .
99
III - Semester
CE 701 Earthquake Resistant Design of Structures
Sessional : 25 marks University Exam: 75 marks (L-T-P : 4-1-0)
Characteristics of earthquakes: Earthquake terminology, magnitude, intensity, measurement of ground motion, frequency-magnitude relationship, liquefaction. Strong ground motion: Acceleration time histories, peak parameters (peak ground acceleration / velocity / displacement), response spectrum, site effects. Earthquake analysis of structures: Idealization of structures, response spectrum analysis, equivalent force concepts, torsionally coupled systems. Concepts of earthquake resistant design: objectives, ductility, ductility reduction factor, over-strength, response reduction factor, design response spectrum, lateral stiffness, building configuration, base isolation, concept of structural control. Building codes: Performance of buildings in past earthquakes, historical perspective of code development, Indian code (IS: 1893), provisions for buildings, Retrofitting and strengthening of structures (IS: 13935). Detailing for reinforced concrete and masonry buildings, provisions of IS: 13920, IS: 4326, IS: 13927, IS: 13928
CE 702
Computational Lab/Project
Sessional : 60 marks University Exam: 40 marks
(L-T-P : 0-0-6)
Electives
CE 641 Advanced Soil Mechanics and Foundation Engineering
(L-T-P : 4-1-0) Sessional : 25 marks University Exam: 75 marks Soil exploration for hydraulic structures and buildings, SPT, dynamic, static cone penetration tests and geophysical method; Bearing capacity, settlement and lateral pressure; Design of shallow foundations; Spread, strip and combined footings (conventional and elastic line methods); Raft footing, Design of deep foundations; Piles and pile groups, pile caps;
101 design of retaining walls and sheet piles; Principles of design of cofferdams and diaphragm walls; design of machine foundations.
102 Balanced cantilever Bridge, Arch bridges, Bowstring girder bridges, Prestressed Bridges; Steel Bridges: Plate girder bridge, Box girder bridge, Cable Stayed Bridge, Cantilever bridge; Design of pier and abutments, pile and well foundations, Bearings, Seismic design considerations.
103
104
105 Water quality, Gas Transfer and aeration, Coagulation, Flocculation, Sedimentation, Flotation, Filtration, Chemical Precipitation, Disinfection, Water stabilization, Adsorption, Ion Exchange , Reverse osmosis
II - Semester
CE 626 Biological Processes of Wastewater Treatment
(L-T-P : 4-1-0) Sessional marks : 25 University Exam marks: 75 Types of reactors, Reactor profiles, Plug flow reactor and completely mixed reactors, kinetics of microbial growth and substrate utilization, types of biological reactors, activated sludge process, trickling filter, biological nitrification and denitrification, stabilization ponds, Anaerobic processes Fundamentals and process design parameters.
106
III - Semester
CE 721 Water Treatment Plant Design and Operation
(L-T-P : 4-1-0) Sessional marks : 25 University Exam marks: 75 Treatment flowsheets, Mass balance calculations, Treatment plant hydraulics, Flow measurement, Parshall flume Manifold hydraulic design, Aeration Rapid mixing, Flocculation, Sedimentation, Granular media filtration, Hydraulic profile, Chemical precipitation, chlorine contact tank, Sludge handling
Electives
CE 681 Dispersion and Effects of Pollutants in Environment
(L-T-P : 4-1-0) Sessional marks : 25 University Exam marks: 75 Impacts of pollutants on environment , Environmental Pollution, Effluent disposal into lakes, rivers and oceans, Ocean outfall design, Dispersion of contaminants in air and water surface and ground water, Pollutant transport
107 aspects of data anlysis, Risk assessment, Design of experiments, Optimisation Methods
108 EIA techniques for industrial facility construction and operation, Legal aspects- Legislation in the Indian context, Acts related to air and water, Case Studies
109
CE- 613
Fluvial Hydraulics
Sessional : 25 marks University Exam: 75 marks
(L-T-P : 4-1-0)
Sediment properties, Initiation of motion, Bed forms, Bed load, suspended load and total load equations, Velocity distribution in alluvial
110 streams, Sediment sampling Design of stable channels in alluvium. Regime concept and rational methods: Hydraulics of alluvial rivers, Meandering, aggradation, degradation and localized scour problems. River models. Sediment flow through pipes.
CE 614
Rigid Dams
University Exam: 75 marks
General: Types, characteristics, Relative merits and demerits, Site investigations and selections, preparation and treatment of the foundation grouting. Gravity dams : Forces acting, Stability requirements, design criteria, modes of failure and factor of safety, methods of analysis, dam profile. Stress analysis in Gravity dams, Normal and shear stresses, Principal stresses, Internal stresses, Zoning of gravity dams, galleries in dams, stress concentration around openings, joints in dams, construction of gravity dams. Arch Dam : General consideration, types and characteristics, Forces acting on Arch dams, Design criteria, Cylinder theory and elastic theory of design, Construction of arch dams. Buttress dam : Merits, Types and characteristics, Forces acting, design of deck buttresses, Unit column theory, Construction of buttress dam.
II - Semester
CE - 616
(L-T-P : 4-1-0)
Design storms, Probable maximum precipitation, Stream flow measurement, Stream flow generation, Separation of stream flow components, Derivation of unit hydrograph, Synthetic unit hydrograph, Statistical and Probability analysis of hydrological data, Probability and stochastic methods of flood frequency, Regional flood frequency
111 analysis, Risk, Reliability and safety factor, Flood routing, Linear regression and Correlation, Mathematical models in hydrology.
112 programming problem, Solution by graphical and Simplex methods, Duality. Probability, sample space, events. Solution of simple problems using laws of Probability. Conditional probability, Dependent and Independent events. Addition and Multiplication theorems of Probability. Repeated trials. Random Variables, Binomial, Normal and other distributions
III - Semester
CE 711 Spillways and Energy Dissipaters
(L-T-P : 4-1-0) Sessional : 25 marks University Exam: 75 marks Types of spillways, stability, Performance and design, Energy dissipaters and stilling basin, Intake gates and valves, Outlet works, Stream-bed protection works.
Electives
CE 601 Higher Numerical Analysis
(L-T-P : 4-1-0) Sessional : 25 marks University Exam: 75 marks Linear equations and eigenvalue problems; Accuracy of approximate calculations; Non-linear equations, interpolation: Langrange, Newtons and Hermite interpolation; Differentiation and evaluation of single and multiple integrals; Numerical solution of differential equation, finite difference methods, Initial and boundary value problems.
113
114 Linear and non-linear seepage through porous media, Equations of motion, Seepage model, Kozney and Carmon equation, steady state seepage: Unconfined aquifers: with positive and negative recharge, Leaky artesian aquifers; one and two layered systems, Aquifers with inclined impervious boundary , Method of images, Partially penetrating wells, Non-equilibrium seepage, Determination of aquifer constants, sea water intrusion in costal aquifers, model studies and numerical analysis of ground water problems: Finite element and finite difference technique.
115 Solid Wastes; origin, characteristics, quantity and analysis, Effects of solid wastes- municipal, agricultural and industrial, Storage, collection and transport of solid wastes, Solid waste disposal and treatment, Sanitary landfill, Composting, Incenaration, Pyrolysis, Biogas recovery, Refuse treatment for product recovery, Hazardous wastes- classification, alternative in management, Treatment- biological and chemical, Disposal of hazardous wastes.