Anda di halaman 1dari 3

Agents of Erosion

Erosion operates closely with weathering. Erosion essentially involves the removal of material which has often already been weathered. The key agents of erosion are rivers, moving ice (glaciation) and the sea. Junior Cert. Students are required to know about the work of rivers and either glaciation or the work of the sea.

Rivers
For this section of the course, the student is required to know the three main stages of a rivers course together with the major features found at each stage. How and why rivers erode, transport and deposit material should also be studied. Finally, how human activities and man interact should also be noted. A rivers ability to erode depends mainly upon:

The speed of the river (increases with steepness of slope) The volume of water in the river (increased water means increased ability to carry material)

A river transports its material :

In suspension (carried in the water) In solution (dissolved in the water) As bedload (rolled along the bed of the river)

A river deposits its material :

When it slows down (usually when it comes to flatter land) When its volume decreases (e.g. in times of drought) When it reaches the sea.

The three stages of a rivers course are: 1. Upper Course (stage of Youth) 2. Middle Course (stage of Maturity) 3. Lower Course (stage of OldAge) The Upper Course Here, the river is mainly concerned with erosion. The river valley has a V-shape. Key features a student should know about would be interlocking spurs, waterfalls and rapids. The Middle Course Here the river is concerned with both erosion and deposition. It is eroding its sides and now the valley has a broader flatter profile. The river twists and turns (meanders) with its broader valley. Key features a student should know about would be meanders and flood plains. The Lower Course At this stage, the river is flowing on a very gentle slope, therefore it is flowing more slowly. This lack of speed means the river is unable to carry all its load. Deposition now occurs and the key features of this stage are depositional ones deltas and ox-bow lakes being obvious examples.

Rivers and mankind

Advantages of rivers include:

Can Can Can Can

provide H.E.P. (hydro-electric power) be used for transport be used for recreational purposes be used for irrigation purposes.

Disadvantages include:

Can cause flooding which may lead to loss of life, damage to crops and damage to property.

Moving Ice (Glaciation)


Key features of glacial erosion Key features of glacial depositon Glaciers and Mankind.

How glaciers form Glaciers form is cold conditions when winter snows do not melt in the summer. Over time this snow accumulates and, due to the overlying weight, it turns to ice. In time this ice becomes a glacier and moves downslope due to gravity. Ireland was at one time much colder than now and the last ice glacial period in Ireland finished about 10,000 years ago. Glacial erosion Glaciors erode by (a) plucking here the glacier pauses and melts a little. When it re-freezes and moves on it plucks material from the floor and sides of the valley. (b) abrasion in this case, the glacier scrapes the bed and sides of the valley with the boulders it has embedded in it) Key features of erosion are:

cirque (corrie) the birthplace of a glacier glaciated (U-shaped) valley ribbon lake (found on the glacial valley floor) In general, erosion takes place in the upland and deposition on the lowlands.

Glacial deposition Glaciers normally deposit material when they reach lower levels and begin to melt. This material is usually unsorted and remains as it was when first picked up by the glacier. Typical examples of this are:

Boulder clay (glacial till) which gets spread over large areas such as the Midlands of Ireland Drumlins, which are oval-shaped hills formed by glacial deposition.

However, sometimes the features deposited on lowlands are associated with melt-water flowing from the front of the glacier. These features differ in that the material is sorted and rounded as it has been affected by running water. An esker (a long winding ridge of sand and gravel laid down on the bed of a stream flowing with the melting glacier) would be the most significant of these features . Glaciers and mankind

Advantages of glaciation include:

Many glaciated eskers and valleys provide excellent routeways Glacial lakes can sometimes be used as reservoirs or to help in H.E.P. production Glaciated areas often provide very attractive scenery Sands and gravel from glacial deposits can be used in the construction industry.

Disadvantages include:

Some of the soil laid down by glaciers can be of very poor quality and badly drained Glaciers sometimes remove the soil cover from an area and leave just bare rock.

The Sea (Coastal Landforms)


As with rivers and ice, the sea erodes, transports and deposits material, thereby changing the shape of coast lines. Sea Erosion is caused by waves. The strength of the waves depends on the strength of the wind and the fetch (the distance the wave travels). Waves reaching the West of Ireland will have a greater fetch than those on the east coast. Waves erode mainly by:

Hydraulic action (power of the water hitting the shore) Abrasion (stones etc. bashed against the shore by the waves) Solution (when certain rocks e.g. chalk are dissolved by the water)

Key features of erosion would include bays, cliffs and caves. Destructive waves is the term used for waves which erode the coastline. Constructive waves are those which lead to the fomation of new features along the coast. This usually happens when the coastline is shallow. Here, waves are forced to slow down and they then deposit material which may have been removed elsewhere. Sea deposition A beach is formed when constructive waves deposit material along the shore. This is most likely to happen in a bay. Most other features of deposition are associated with longshore drift. This is where material (sand etc) is carried along the shore by currents. When this material meets an obstruction such as a headland, it gets deposited. Key features of longshore drift include:

spit (a ridge of sand projecting out from the shore) tombolo (where a spit links an island to the mainland) lagoon (a lake formed when a spit claces off a bay.

Coasts and mankind The sea is of huge benefit to man for food, transport etc. Many cities are situated on the coast and mankind has often tried to control how the sea shapes the coastline. Mankind tries to control coasts in order to prevent flooding ; reclaim land from the sea; stop the erosion of amenities such as beaches.

Anda mungkin juga menyukai