Installation of USB
ROI-S05752
2.
-94-
Installation of USB
3.
Insert the CD-ROM of the USB driver to the PC and select Search for the best driver in these locations and check Search removal media [floppy, CD-ROM...], then, Click on the Next button,
4.
5.
-95-
6.
Click Finish button in the Found New Hardware Wizard after installation has been completed.
-96-
Dial-up Setting
2.
The Network Connections window appears. Click on the Create a new connection in the Network Tasks category.
-97-
3.
The Welcome to the New Connection Wizard window appears. Click on the Next button to continue.
4.
Select Connect to the network at my workplace and Click on the Next button to continue.
-98-
Dial-up Setting
5.
Select option Dial-up connection and Click on the Next button to continue.
6.
On the New Connection Wizard window, enter LCT in the Company Name entry field and Click on the Next button to continue.
-99-
7.
Enter phone number in the Phone number entry field and Click on the Next button to continue.
8.
Verify that the connection LCT has displayed as the connection registered. You can also create a shortcut on your desktop if you need. Click on the Finish button.
-100-
Dial-up Setting
9.
10. Verify that Modem-USB Modem Driver [COM(#)] is displayed on the General dialog box connect using check box, and select Show icon in notification area when connected in the LCT Properties dialog. Then, Click on the Configure button.
-101-
11. On Modem Configuration dialog, check that unchecked all five boxes, then Click on the OK button,
12. Retain the default setting on the Options tab, click the Security tab.
-102-
Dial-up Setting
13. Retain the default setting on the Security tab, click the Networking tab.
14. On the Networking tab, verify that PPP... is displayed in the Type of dial-up server I am calling setting field, unchecked File and Printer... and Client for Microsoft...., Client for Microsoft Networks.
-103-
15. Click Settings button, unchecked all the boxes in the PPP Settings dialog as shown below. Click OK to go back to the previous window. Point Internet Protocol (TCP/IP) and then click Properties.
16. Verify that both Obtain an IP address automatically and Obtain DNS server address automatically are selected.
-104-
Dial-up Setting
18. In the Advanced TCP/IP Settings dialog, mark check box of Use default gateway on remote network and for the PPP link is unchecked, then Click OK.
19. Retain the default setting on the Advanced tab and click OK.
-105-
-106106 pages