1.
1.1 1.2
2.
2.1 2.2 2.3
3.
3.1 3.2 3.3 3.4
4.
4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9
DETECTORS.................................................................................................................. 38
Automatic fire detectors SecuriStar addressable.................................................................................. 38 Automatic fire detectors SecuriStar conventional................................................................................. 41 Sockets and accessories for SecuriStar detectors ............................................................................... 43 Room indication lamps............................................................................................................................... 46 Automatic fire detectors conventional ex-proofed.................................................................................. 48 Flame detector............................................................................................................................................. 52 Ventilation duct detector ............................................................................................................................ 54 Manual call points addressable ................................................................................................................. 55 Manual call points conventional................................................................................................................ 57
5.
5.1 5.2 5.3 5.4
ACCESSORIES.............................................................................................................. 62
Sirens ........................................................................................................................................................... 62 Flash lights .................................................................................................................................................. 65 Other accessories ....................................................................................................................................... 66 Detector removal and test tools ................................................................................................................ 67
6.
6.1 6.2
7. 8.
9.
9.1 9.2 9.3 9.4 9.5
Introduction
This product catalogue describes the most important components within the fire alarm system SecuriPro. All Securiton fire alarm systems, system components and detectors are developed and manufactured in Switzerland/Germany and comply with the most currently applicable standards (European standards, specifications made by fire brigades as well as European Institutes for Testing and Certification, etc.), as well as representing the cutting edge of technology based upon the most up-to-date scientific knowledge. Securiton's high quality standard has been documented by means of a quality assurance system, which has been certified for all divisions of the company in accordance with ISO 9001:2000. The planning of fire alarm systems, as well as the installation, commissioning and maintenance of products and the systems which they form, require special technical knowledge, and may therefore only be carried out by professionals who have been trained in this field. The product-specific training of technical staff must therefore either be carried out by Securiton or by persons who have been authorised by Securiton for this specific purpose. Additionally, the prevailing regulations and directives specific to the respective country with regard to planning, installation and use of products must be noted and observed without exception. Securiton is not liable for damages and consequential damages occurring as a result of tampering with or modifying our products, or as a result of their improper usage. This is also the case where items have been improperly stored or where there have been other external factors involved. The descriptions and technical data included in this catalogue are up-to-date at the time of release. We reserve the right to make alterations to them, particularly where justified by technological advancements. The illustrated products may also differ visually from the products supplied as a result of continuous further development of products. The layout of this catalogue is subject to copyright. The copying or reuse of text, illustrations and photos in any media (e.g. print, CD-ROM, Internet, etc.) contained within this catalogue - also in an abridged form - is only allowed with our explicit written permission. We assume no liability for typographic errors and obvious mistakes. Please quote the relevant item numbers when making enquiries or placing an order. Delivery conditions are regulated in the General Terms and Conditions of Securiton AG for Export Deliveries
SecuriLan devices MCU Main Control Unit MIC Main Indication and Control Map PCM Partial indication and Control Map PIM Partial Indication Map FBM Fire Brigade Map SIB Serial Interface Board PIB Printer Interface Board OCB Open Collector output Board ARB Alarm Routing Board FTR Fibre Optic Repeater
SecuriLine devices COM Command Module ICM Indication and Control Map IOM Input /Output Module LKM Ventilation Duct Detector MDI Multiple Detector Interface RMU Radio Master Unit ROM Relay Output Module SCI Special-detection Connection Interface SCU Stub Control Unit SDI Single Detector Interface SLI SecuriLine Interface SOM Surveyed Output Module SecuriStar Addressable Fire Detectors SSD Scattered Light Smoke Detector UTD Universal Smoke Detector STD Combined Heat and Smoke Detector
Special Fire Detection ASD Aspiration Smoke Detector ADW Linear Heat Detector TSC Temperature Sensor Cable Wireless Detectors RSD Radio Smoke Detector RCM Radio Contact Module
4300580-0002
20 to 30 V DC 60 mA -5 C to +45 C 120 x 60 x 50 mm
4300828-0002
20 to 30 V DC 36 mA -5 C to +45 C 85 x 90 x 20 mm G 204098
Mains Filter Module MFM 31 The mains filter protects the system against malfunctions caused by electromagnetic disturbances in a wide frequency range, transmitted via mains connection. The MFM is highly recommended in industrial environments or wherever EMC may cause a problem. Technical data Mains voltage Rated current Ambient temperature Leak current Frequency range Dimensions (H x W x D) Overvoltage Arrester OVA 31 The over voltage arrester OVA 31 protects the system against damages due to over voltage on the mains. It conducts high-energy over voltages by means of gas-filled arresters to earth. Low-energy over voltages are eliminated by means of the zinc oxide varistors. Technical data Mains voltage Rated current Ambient temperature Dimensions (H x W x D) Support plate to built into the MCU for LAN and Line modules SPL 21 A Slew able support plate to build into the MCU for mounting LAN/Line modules 4300671 4300429 4300505
MCU extension box ADB 21A-04 Additional Box having the same dimensions as the MCU box for the extension with further system components and 2 batteries 12 V/40 Ah Technical data Protection class Dimensions (H x W x D) Casing
Securiton Product Catalogue 2007 - SecuriPro
4300673-0004
BS 84/1 with BSP 84 Protection of a SecuriPro system from the effect of lightning strikes This unit is used for the connection of the SecuriLan , MDI lines, or any input/output lines. For two SecuriLan Varistor for low-energy surges Gas-filled arresters for high-energy surges Metallic mounting plate, plastic box Technical data Operating voltage (normal 12V/24V) Rated current Pluggable terminals Dimensions (H x W x D) Lightning protection device for SecuriLine BS 81/1 with BSP 81 Protection of a SecuriPro system from the effect of lightning strikes This unit is used for the connection of the SecuriLine. For two SecuriLine Varistor for low-energy surges Gas-filled arresters for high-energy surges Metallic mounting plate, plastic box Technical data Operating voltage Rated current Pluggable terminals Dimensions (H x W x D) Lightning protection device for SecuriLan and SecuriLine BS 85 with BSP 81 and 84 Protection of a SecuriPro system from the effect of lightning strikes. This unit is used for the connection of the SecuriLan and SecuriLine. For two SecuriLan For two SecuriLine Varistor for low-energy surges Gas-filled arresters for high-energy surges Metallic mounting plate, plastic box Technical data Operating voltage Rated current Pluggable terminals Dimensions (H x W x D)
Securiton Product Catalogue 2007 - SecuriPro
5700109
5700108
5700110
5300643-0005
Main indication and control panel for SecuriPro fire alarm systems for the connection to the redundant communication and power supply bus. The MIC 732 provides a 4x 40 character display with backlight, a numerical input block of 12 keys, five soft keys and 16 LED indicators. Various display languages are implemented, based on the Latin character set. Several MIC 732 can be connected to a SecuriPro communica tion bus SecuriLan . The operating panel MIC 732 contains: Polycarbonate housing Key switch for operation release Technical data Operating voltage Operating current, constant Ambient temperature Protection class Dimensions (H x W x D) Colour VdS-Number
10
Operating and display panel, SecuriLan MIC 734 Main indication and control panel for SecuriPro fire alarm systems for the connection to the redundant communication and power supply bus. The MIC 734 provides a 8x 40 character display with backlight, a numerical input block of 12 keys, five soft keys and 16 LED indicators. Various display languages are implemented, based on the Latin and Cyrillic character set. Several MIC 734 can be connected to a SecuriPro communica tion bus SecuriLan . The operating panel MIC 734 contains: Polycarbonate housing Key switch for operation release Technical data Operating voltage Operating current, constant Ambient temperature Protection class Dimensions (H x W x D) Colour VdS-Number
5300671-0005
11
5300728-0302
Main indication and control panel for SecuriPro fire alarm systems for the connection to the redundant communication and power supply bus. The MIC 742 provides a 4x 40 character display with backlight, a numerical input block of 12 keys, five soft keys and 16 LED indicators. Various display languages are implemented, based on the Latin character set. Several MIC 742 can be connected to a SecuriPro communica tion bus SecuriLan . Furthermore the MIC 742 includes fire brigade control and indication according to Swedish Standard SS 3654. The operating panel MIC 742 contains: Polycarbonate housing No fire brigade key for operation release Technical data Operating voltage Operating current, constant Ambient temperature Protection class Dimensions (H x W x D) Colour SBSC-Number Operating and display panel, SecuriLan
10 to 30 V DC 70 mA -5 C to +45 C IP 32 168 x 360 x 52 mm anthracite violet, RAL 3002005 not received yet
PCM 731 A For switching and indicating functions in a SecuriPro system. Functions on buttons and LEDs can be configured via software. 16 LEDs (8 red and 8 yellow, pair wise) 8 push buttons Technical data Operating voltage Operating current, constant Ambient temperature Protection class Dimensions (H x W x D) Colour VdS-Number Display panel, SecuriLan PCM 731 A Same as PCM 731A, 5300681-0002, except: without housing
Securiton Product Catalogue 2007 - SecuriPro
5300681-0002
5300681-0001
12
PIM 731 A For status indication of detectors, zones or any other system parts. 32 LEDs (16 red and 16 yellow, pair wise) Holder for inscription labels LEDs can be configured via software Technical data Operating voltage Operating current, constant Ambient temperature Protection class Dimensions (H x W x D) Colour VdS-Number Display panel, SecuriLan
5300682-0002
PIM 731 A Same as PIM 731A, 5300682-0002, except: without housing Display panel, SecuriLan PIM 732 A For status indication of detectors, zones or any other system parts. 32 LEDs (all red) Holder for inscription labels LEDs can be configured via software Technical data Operating voltage Operating current, constant Ambient temperature Protection class Dimensions (H x W x D) Colour VdS-Number Display panel, SecuriLan PIM 732 A Same as PIM 732A, 5300683-0002, except: without housing
5300682-0001
5300683-0002
5300683-0001
13
PIM 733 A For status indication of detectors, zones or any other system parts. 32 LEDs (all yellow) Holder for inscription labels LEDs can be configured via software Technical data Operating voltage Operating current, constant Ambient temperature Protection class Dimensions (H x W x D) Colour VdS-Number Display panel, SecuriLan
5300687-0002
PIM 733 A Same as PIM 733A, 5300687-0002, except: without housing Operating panel, SecuriLan KSW 731 For release of SecuriLan operating panels without an integrated key switch. Only in combination with another SecuriLan participant, e.g. PCM 731 Technical data Operating voltage Operating current, constant Ambient temperature Protection class Dimensions (H x W x D) Colour VdS-Number Display panel, SecuriLan
5300687-0001
5300647-0005
5300647-0003
14
2.2 SecuriLine
Operating and display panel, SecuriLine ICM 731/1 Code input unit for indicating and controlling sectors or zones in SecuriPro FAS. Up to 9 functions free programmable 8 LED for status indication Code input key block Lamp test button Key switch Technical data Operating voltage Operating current, constant Ambient temperature Protection class Dimensions (H x W x D) Colour VdS-Number Operating and display panel, SecuriLine ICM 731/1 Same as ICM 731, 5300676-0007, except: without housing
5300676-0007
5300676-0005
15
5300678-0005
Operating and display unit for indicating and controlling sectors or zones in SecuriPro FAS. 6 LED (2 red, 2 yellow, 2 green) for status indication, free programmable 3 buttons, free programmable Lamp test button Key switch Technical data Operating voltage Operating current, constant Ambient temperature Protection class Dimensions (H x W x D) Colour VdS-Number Operating and display panel, SecuriLine KIM 732 Same as KIM 732, 5300678-0005, except: without housing 5300678-0003
16
4300534-0002
17
Separation rip for FGG 716 CRB 01 Compensation rip in order to cover the gap between two small sizes panels aor blind plate which are fitted in a big sized cabinet FGG 716 Technical data Material Colour Table stand TST 01 For mounting a SecuriPro panel on a table or on a wall. Fits for cabinet FGG 716 or FGG 717 (2 units TST 01 needed) Technical data Material Colour
4300530-0002
4300531-0002
Levelling Wedge LWE 716 The levelling wedge LWE 716 is used when several FGG 71x have to be mounted one under the other, or when no map inclination is desired. For FGG 716 1 LWE 716 is required For FGG 717 3 LWE 716 are required Technical data Material Colour 4300532-0002
Key hole covering set KCS 71 The key hole covering set is used for MICs, where no key switch is required for MIC731/732/733/734 Technical data Material Colour 234150
18
4300457-0003
ARB 71/1A Interface to an alarm transmission unit. Outputs for alarm / fault / switch on control / others and inputs for monitoring the status of the transmission unit. An emergency alarm path can activate the alarm output in case of a system failure. with distance holders, no box
4300811-0003
Technical data Operating voltage Operating current, constant Ambient temperature Dimensions (H x W x D) VdS-Number
19
SIB 71/1A Interface to an alarm management system SLS. Interface type RS232 with distance holders, no box
4300773-0123
Technical data Operating voltage Operating current, constant Ambient temperature Dimensions (H x W x D) Serial interface board, SecuriLan
SIB 71/2A Interface to a serial log printer. Interface type RS232 with distance holders, no box Technical data Operating voltage Operating current, constant Ambient temperature Dimensions (H x W x D) Serial interface board, SecuriLan
4300786-0223
SIB 71/4A Interface to a paging system via ESPA protocol. Interface type RS 232 with distance holders, no box Technical data Operating voltage Operating current, constant Ambient temperature Dimensions (H x W x D) Serial interface board, SecuriLan
4300829-0423
SIB 71/4A Same as SIB 71/4A 4300829.0423, except: Interface type RS 422
4300829-0433
20
PIB 71 Interface to a printer via standard parallel printer cable. with distance holders, no box Technical data Operating voltage Operating current, constant Ambient temperature Dimensions (H x W x D) Printer module, SecuriLan ILP 151 Integrated log printer, for continuous logging of events in SecuriPro fire alarm systems, with paper winding device. Thermal printer to the SecuriPro FAS incl. LPM 151, PIB 71 and GPR/11347 Technical data Operating voltage Operating current, constant Ambient temperature Dimensions (H x W x D) Printer module, SecuriLan
4300774-0002
5700115-0002
GPR/11347 Spare paper roll for Log Printer ILP151, 11m Delivery unit 1 pcs.
3610346
21
SLR 811 SecuriLan repeater for the extension of the system communication bus from 1500 m up to max. 2700 m. max. 1 repeater per LAN in fire alarm systems totally 2 repeaters (LAN 1 and LAN 2) inclusive support rail to be mounted in the MCU Technical data Operating voltage Operating current, constant Max. cable length LAN Ambient temperature Dimensions (H x W x D) Fibre optic module, multimode, SecuriLan FTR 811 Fibre optic twisted pair repeater for the connection of multimode fibre optic cable. Bus or loop topology is possible. Multimode cable (62,5/125 m); 1320 nm 2 repeater per fibre optic segment no configuration is necessary from Release R 01.03.00.004 no emergency path inclusive support plate APL21 to be mounted into the MCU Technical data Operating voltage Operating current, constant Max. cable length LAN (Twisted pair) Max. fibre optic cable length Fibre optic cable Wave length Ambient temperature Dimensions (H x W x D)
5700101
27 V DC 40 mA 2700 m 0 C to +60 C 95 x 45 x 38 mm
5700102
22
FTR 813 consisting of 2 items: LR01 (Repeater bridging type) ATR 22 (Support rail) Photo without ATR22 Fibre optic twisted pair repeater for the connection of single mode fibre optic cable in a bus topology. Bridging type Single mode cable (9/125 m); 1320 nm 2 repeater per fibre optic segment LAN 1 2 repeater per fibre optic segment LAN 2 no configuration is necessary from Release R 01.03.00.004 no emergency path support rail ATR22 (to be ordered separately) to be mounted in the MCU Technical data Operating voltage Power consumption Max. cable length LAN (Twisted pair) Max. fibre optic cable length Fibre optic cable Wave length Ambient temperature Dimensions (H x W x D) 4700059 4700061
23
FTR 813 PP consisting of 2 items: LR01 PP (Repeater end type) ATR 22 (Support rail) Photo without ATR22 Fibre optic twisted pair repeater for the connection of single mode fibre optic cable in a bus topology. End type (point to point) Single mode cable (9/125 m); 1320 nm 2 repeater per fibre optic segment LAN 1 2 repeater per fibre optic segment LAN 2 no configuration is necessary from Release R 01.03.00.004 no emergency path support rail ATR22 (to be ordered separately) to be mounted in the MCU Technical data Operating voltage Power consumption Max. cable length LAN (Twisted pair) Max. fibre optic cable length Fibre optic cable Wave length Ambient temperature Dimensions (H x W x D) 4700060 4700061
24
4300788-0003
Special detector connection interface for the integration of Securitons special fire detection systems such as ASD, ADW, TSC 4 inputs and 2 relay outputs, freely programmable. with distance holders, no box integrated SecuriLine interface for automatic addressing and automatic short circuit isolation by fully functionality of the multifunctional detector loop SecuriLine . Technical data Operating voltage Operating current, constant Relay outputs Ambient temperature Dimensions (H x W x D) VdS-Number Special detector interface module, SecuriLine SCI 82 Same as SCI 82, 4300788-0003, except: incl. installation box DOS816 sm Special detector interface module, SecuriLine
4300788-0005
SCI 82 installation set Same as SCI 82, 4300788-0003, except: incl. fastening bow for mounting into the ADW511 box SecuriLine interface module, SecuriLine SLI 51A Communication interface for the integration of Securitons Aspira tion Smoke Detector system ASD 516 to SecuriLine . to be mounted into the ASD516 integrated SecuriLine interface for automatic addressing and automatic short circuit isolation by fully functionality of the multifunctional detector loop SecuriLine. Technical data Operating voltage 16 to 30 V DC Operating current SecuriLine (typically / max.) 0.9 / 1.3mA Relay output (VDC / A / W) 60 / 2 / 30 Ambient temperature -5 C to +45 C Dimensions (L x W x H) 95 x 58 x 17 mm
4300789-0201
4301018-0201
25
4300464-0003
Provides 8 conventional fire detection lines. A max. of 32 detectors can be connected to each line. Additionally, 3 freely programmable open collector outputs are available with distance holders, no box integrated SecuriLine interface for automatic addressing and automatic short circuit isolation by fully functionality of the multifunctional detector loop SecuriLine. Technical data Operating voltage Operating current, constant Ambient temperature Dimensions (H x W x D) VdS-Number Conventional detector interface module, SecuriLine MDI 82 Same as MDI82, 4300464-0003, except: incl. installation box DOS816 sm Conventional detector interface module, SecuriLine MDI 82 Same as MDI82, 4300464-0003, except: incl. installation box Rittal IP 66
4300464-0005
4300464-0006
26
Multiple Detector Interface module, for detector technology series 140/150, SecuriLine MDI 140
4301030-0003
With the Multiple Detector Interface MDI 140, fire detectors and alarm transmitters of series 140 and 150 can be connected to a SecuriPro fire alarm control panel MCU 211B. The MDI 140 permits the replacement / renovation of an HX/HS fire alarm control panel by a SecuriPro -MCU 211B without it being necessary to replace the existing fire detectors of series 140 or 150. The MDI 140 has emergency alarm capability and, in the event of a CPU failure (MDI or MCU), can recognize a fire alarm of a detector and process it as an emergency alarm. Supports the following 140 series devices: ORM 140; ORM 140K; WDM 240; WMM 241; UFM 840; IFM 841; DFM 155; FT 513; ADX 156 Supports the following 150 series devices: ORM 150; ORM 150K; WDM 152; WMM 153; DFM 155; FT 513; ADX 156; SBS 157; UAS 159; RKM 150 provides 8 fire detection lines or 4 loops with distance holders, no box integrated SecuriLine interface for automatic addressing and automatic short circuit isolation by fully functionality of the multifunctional detector loop SecuriLine. Technical data Operating voltage Operating current, constant Ambient temperature Dimensions (L x W x D) VdS-Number
27
4300808-0001
Addressing module for detectors, contacts, controls and signalling devices. With emergency alarm transmission. Provides 3 inputs and 1 open collector output, freely programmable integrated SecuriLine interface for automatic addressing and automatic short circuit isolation by fully functionality of the multifunctional detector loop SecuriLine . Technical data Operating voltage Operating current, constant Ambient temperature Colour Dimensions (H x W x D) Single detector interface module, SecuriLine SDI 81A Addressing module for detectors, contacts, controls and signalling devices. No emergency alarm transmission. Provides 3 inputs and 1 output, freely programmable integrated SecuriLine interface for automatic addressing and automatic short circuit isolation by fully functionality of the multifunctional detector loop SecuriLine . Technical data Operating voltage Operating current, constant Ambient temperature Colour Dimensions (H x W x D) 4300808-0001
28
4300645-0002
Same as SDI81A, 4300808-0001, except: Mounted into a phoenix box Provides 3 inputs and 2 output, freely programmable
4300807-0002
To be mounted on the mounting rail into the EPSU. For technical monitoring of the power supply EPSU and fault transmission to the SecuriPro Same as SDI81A, 4300808-0001, except: Mounted into a phoenix box
29
COM 81 Command module for control and signal reception Provides 1 relay output and 1 input, freely programmable with distance holders, no box integrated SecuriLine interface for automatic addressing and automatic short circuit isolation by fully functionality of the multifunctional detector loop SecuriLine . Technical data Operating voltage Operating current, constant Relay contact Ambient temperature Dimensions (H x W x D) VdS-Number In- output module, SecuriLine COM 81 Same as COM 81, 4300458-0003, except: incl. installation box DOS816 sm In- output module, SecuriLine
4300458-0003
4300458-0005
COM 81 Same as COM 81, 4300458-0003, except: incl. installation box Rittal IP 66
4300458-0006
30
ROM 81/1 For control of loads up to 230VAC. Provides 3 changeover relay output contacts and 1 input, freely programmable with distance holders, no box integrated SecuriLine interface for automatic addressing and automatic short circuit isolation by fully functionality of the multifunctional detector loop SecuriLine. Technical data Operating voltage Operating current, constant Relay contact Ambient temperature Dimensions (H x W x D) VdS-Number Relay output module, SecuriLine
4300647-0003
ROM 81/1 Same as ROM 81/1 4300647-0003, except: incl. installation box DOS816 sm Relay output module, SecuriLine ROM 81/A For repair and extensions only. Compatible to Release 0101 - 0103 with distance holders, no box Relay output module, SecuriLine ROM 81/A For repair and extensions only. Compatible to Release 0101 - 0103 incl. installation box DOS816 sm
4300647-0005
4300755-0003
4300755-0005
31
IOM 81A For control of loads up to 60VDC. Provides 5 changeover relay output contacts and 3 optocoupler inputs, freely programmable with distance holders, no box integrated SecuriLine interface for automatic addressing and automatic short circuit isolation by fully functionality of the multifunctional detector loop SecuriLine. Technical data Operating voltage Operating current, constant Relay contact Input voltage Ambient temperature Dimensions (H x W x D) VdS-Number Relay output module, SecuriLine IOM 81A Same as IOM 81 4300461-0003, except: incl. installation box DOS816 sm
4300757-0003
4300757-0005
32
4300460-0003
In combination with the line termination device LUG 81 or LUG82, the SOM81 provides 3 monitored relay outputs, especially designed for driving alarm devices. An input for the emergency alarm path allows the alarm transmission even in case of a system processor failure. The 3 outputs are freely programmable. Per output, one LUG device is needed. with distance holders, no box integrated SecuriLine interface for automatic addressing and automatic short circuit isolation by fully functionality of the multifunctional detector loop SecuriLine. Technical data Operating voltage Operating current Fuses at each output Max. output voltage Ambient temperature Dimensions (H x W x D) VdS-Number Surveyed relay output module, SecuriLine SOM 81 Same as SOM 81, 4300460-0003, except: incl. installation box DOS816 sm Surveyed relay output module, SecuriLine SOM 81 Same as SOM 81, 4300460-0003, except: incl. installation box Rittal IP 66
4300460-0005
4300460-0006
33
Line terminator, for SOM 81 LUG 82 Line termination device, to be built-in alarm medias, connected to SOM 81 outputs. Technical data Operating voltage Operating current (monitoring) Rated current Ambient temperature Line terminator, for SOM 81 LUG 81 Line termination device, to be built-in alarm medias, connected to SOM 81 outputs. Technical data Operating voltage Operating current (monitoring) Rated current Ambient temperature Stick control unit, SecuriLine
5700089
15 to 30 V DC 4 mA 1A -20 C to +50 C
5700088
SCU 81 Driver module for a stub line within a SecuriLine . Up to 32 Se curiLine devices can be connected to one SCU 81. with distance holders, no box integrated SecuriLine interface for automatic addressing and automatic short circuit isolation by fully functionality of the multifunctional detector loop SecuriLine . Technical data Operating voltage Operating current, constant Ambient temperature Dimensions (H x W x D) VdS-Number Stick control unit, SecuriLine SCU 81 Same as SCU 81, 4300459-0003, except: incl. installation box DOS816 sm
4300459-0003
4300459-0005
34
RMU 251AP The RMU 251 is the interface between wireless detectors and the SecuriLine . Is consists of the Radio SecuriLine Interface RSI 51 and the Radio Master Module RMM51 (antenna) It is monitoring all 28 radio communication channels against foreign signals and manages the communication from and to the associated radio detectors. Controls up to 60 radio detectors For wireless smoke detectors RSD 532, radio contact module RCM 51 and wireless picture detectors RPD 412 RSI51 in installation box DOS816 sm, for surface mounting The battery for the RSI is an option and has to be ordered separately integrated SecuriLine interface for automatic addressing and automatic short circuit isolation by fully functionality of the multifunctional detector loop SecuriLine. Technical data Operating voltage Operating current, max Ambient temperature Protection class Dimensions RSI51 (L x W x D) Dimensions RMM51 (D x H) VdS-Number Radio Master Unit, SecuriLine
5700120-0001
RMM 51
RSI 51
RMU 251UP Same as RMU 251 AP (5700120-0001), except: RSI 51 in installation box DOS816 fm, for flush mounting Radio Master Unit, SecuriLine RMM 51 RSI 51 Same as RMU 251 AP (5700120-0001), except: RSI 51 with distance holders, no box for installation inside the MCU box Battery 9 V for RSI 51, option BAT 9V Optional 9V alkaline block battery for RSI 51
5700121-0001
5700122-0001 5700123-0001
2360039-0001
35
36
-25 to +60 C up to IP 54 125 x 160 x 45 mm ABS pure white, similar RAL 9010
-25 to +60 C up to IP 54 125 x 160 x 45 mm ABS pure white, similar RAL 9010
37
5000571-0001
15 to 30 V DC max. 0.25 mA -20 C to +60 C (incl. USB 501) IP 44 white 118 x 78 mm EN 54/7 and EN 54/5 G 204015
38
SecuriStar fire detector STD 531 MC Scattered Light Smoke Detector, personalized colour. Same as STD 531, except: Colour according to any RAL Number 5000571-0291
SecuriStar fire detector SSD 531 Scattered light smoke detector. Optical detector for early detection of smothering and open fire. addressable self monitoring of all detector parts false alarm resistant alarm evaluation Pre-warning and alarm level constant sensitivity through dust compensation several colour versions available integrated SecuriLine interface for automatic addressing and automatic short circuit isolation by fully functionality of the multifunctional detector loop SecuriLine . Technical data Operating voltage Operating current (normal) Ambient temperature Protection class Colour Dimensions (D x H) Complies regulation VdS-Number SecuriStar fire detector SSD 531 MC Scattered Light Smoke Detector, personalized colour. Same as SSD 531, except: Colour according to any RAL Number 5000573-0291 5000573-0001
15 to 30 V DC max. 0.25 mA -20 C to +60 C (incl. USB 501) IP 44 white 118 x 78 mm EN 54/7 G 297050
39
SecuriStar fire detector UTD 531-1 Universal temperature detector for early detection of open fire creating a high temperature rise. addressable false alarm resistant alarm evaluation maximum and differential heat alarm integrated SecuriLine interface for automatic addressing and automatic short circuit isolation by fully functionality of the multifunctional detector loop SecuriLine . Technical data Operating voltage Operating current (normal) Ambient temperature Protection class (incl. USB 501) Colour Dimensions (D x H) Complies regulation VdS-Number SecuriStar fire detector UTD 531-2 same as UTD 531-1, except: Complies regulation SecuriStar fire detector UTD 531-3 same as UTD 531-1, except: Complies regulation EN 54/5 B 5100154-0003
5100154-0001
5100154-0002
EN 54/5 A2
40
5000545-0001
41
SecuriStar fire detector UTD 521-1 Universal temperature detector for early detection of open fire creating a high temperature rise. conventional false alarm resistant alarm evaluation maximum and differential heat alarm Connection to SecuriLine via MDI module Technical data Operating voltage Operating current (normal) Ambient temperature Protection class (incl. USB 501) Colour Dimensions (D x H) Complies regulation VdS-Number SecuriStar fire detector UTD 521-2 same as UTD 521-1, except: Complies regulation SecuriStar fire detector UTD 521-3 same as UTD 521-1, except: Complies regulation EN 54/5 B 5100153-0003 EN 54/5 A2 5100153-0002
5100153-0001
42
5000547-0001
43
SecuriStar detector socket USB 501-4 Base for addressable and conventional SecuriStar detectors For concrete mounting integrated 6 wire terminal detector fixing be means of bayonet connection Optional extra large cover ring 177mm available (3110470) Technical data Ambient temperature Protection class Colour Dimensions (D x H) SecuriStar fire detector USB 501 MC Base for addressable and conventional SecuriStar detectors, personalized colour. Same as USB 501, except: Colour according to any RAL Number 5000573-0291 5000547-0004
44
Cover ring RING 158 MC Cover ring for USB501-2 and USB501-4, personalized colour Extra large cover ring, diameter 177mm. For detector base USB501-2 and USB501-4 Existing white ring has to be removed and replaced by this coloured ring. Colour Inscription plate for SecuriStar detectors DNP Detector numbering plate for SecuriStar detectors Additional terminal block for SecuriStar detector socket USB Term Optional reserve terminal block for cross-connections 2510802
3110464
3110320
Dust cover for SecuriStar detectors DPROT 500 Dust cover for SecuriStar Detectors, 500 units Cover ring RING 177 Extra large cover ring, diameter 177mm. For detector base USB501-2 and USB501-4 For replacement of older detector sockets, which cover ring was bigger than the USB standard cover ring 3110470 VE100383
45
209708
46
Room indication lamp for SecuriStar detector RAL 722 Detector alarm indication lamp for SecuriStar detectors. For direct installation in ceiling panels or door frame. Can be used with or without cover plate for dry environment Technical data Operating voltage Operating current Protection class Colour lamp Colour cover Ambient temperature Dimensions (H x W x D) Room indication lamp for SecuriStar detector Cover plate RAL 722 Accessory for RAL 722 Technical data Dimensions (L x W) 192198
6900244
86 x 86 mm
Room indication lamp for SecuriStar detector Raised floor console HKS 718 Accessory for RAL 722 and USB501 Technical data Dimensions (Length) 144223
47
24 V max. 0.15 mA -20 C to +60 C white IP 42 80 x 32 mm EEx ia IIC T4 G 296035 ZELM 01 ATEX 0066
48
IR-flame detector Ex-i, only in combination with GTW DF 1101 Ex Flame detector for explosion-hazard areas with three infrared sensors and the specially developed evaluating algorithms for the highest application requirements VdS approved, without socket. Conventional, two-wire installation Triple-sensor infrared flame detector Two sensors for detection in various wavelengths (4...4.8m and 5.1...6m) Third sensor for increased resistance to sunlight (0.7...1.1m) Microprocessor-controlled signal evaluation Selective evaluation of flicker frequency Excellent immunity to false alarms due to specially developed fuzzy algorithms and the latest wavelet diagnosis Selectable application algorithms Extremely high resistance to: electromagnetic influence, sunlight and heat radiation, humidity and corrosion Two different sensitivity and integration stages Large angle of vision (min. 90) High IP protection category (IP 67) Large operating temperature range (-35... +70C) Connection to SecuriLine via MDI and GTW0x module Technical data Detection angle Operating temperature Operating voltage Operating current Protection class Colour Dimensions (W x H x D) Flammability protection cat. VdS-Number Detector base and accessories to DF 1101 Ex Please refer to flame detectors DF1191 / 1192 6400004
90 -35 C to +70 C 16 - 28 V DC 0.5 mA IP 67 white RAL9010 135 x 135 x 77mm EEx ib IIC T4 G299085
49
Heat detector Ex-i, only in combination with GTW WMM 216 Ex-i For use in explosion zones 1 and 2. The alarm criteria is the max. temperature, approved by VdS and ATEX. Conventional detector, connected via GTW and MDI module to the SecuriLine max. 10 detectors per GTW line LED indication on the detector semiconductor temperature sensor 2-wire connection fits to socket base 143 Ex-I Socket is an option Technical data Operating voltage Operating current (normal) Ambient temperature Colour Alarm threshold Max. heat alarm level Protection class Dimensions (D x H) Flammability protection cat. VdS-Number Ex approval Detector socket Ex-i 143 Ex-i Base for explosion proofed detectors ORM 130 Ex-i, WDM 215 Ex-i and WMM 216 Ex-I in explosion zones 1 and 2. For dry and dump rooms, surface mounting Technical data Colour Dimensions (D x H) Protection class VdS-Number 5000515 5100146
24 V max. 0.15 mA -20 C to +60 C white according EN54, class A1 57 C 3 C IP 22 80 x 32 mm EEx ia IIC T6 G 296034 ZELM 01 ATEX 0066
white 80 x 32 mm IP 42 G 297056
50
DC isolating converter, for detector series 130 Ex-i GTW 01 Barrier between safe area and hazardous area for the connection of one conventional detector line. Max 10 conventional detectors per line For ORM 130 Ex-i,WDM 130 Ex-i,WMM 130 Ex-i Limitation of voltage and current Galvanic decoupling of intrinsically safe fire detectors Mounted outside of the hazardous area Technical data Ex-zone Input voltage Rated current Output voltage Signal transmission Protection class Dimensions (H x W x D) Flammability protection cat. VdS-Number DC isolating converter, for detector series 130 Ex-i GTW 02 same as GTW 01, except: Barrier between safe area and hazardous area for the connection of two conventional detector line. 5700081 5700080
IIA, IIB, IIC 20 to 30 V DC 0 mA to 35 mA min. 15.5 V DC max. 21.5 V DC Current increase IP 54 CW 159 x 167 x 82 mm EEx ia G 297052
51
52
Technical data Detection angle Operating temperature Operating voltage Operating current Protection class Colour Dimensions (W x H x D) VdS-Number Detector base for DF 1191 / 1192 / 1101 Ex DFB 1190
6800078
Base for DF 1191, DF 1192 and DF 1101 Ex For indoor application, surface mounting for outdoor application, a rain hood is available
Rain hood for DF 1191 / 1192 / 1101 Ex Rain hood Rain protection for outdoor application Rain hood for DF 1191 / 1192 / 1101 Ex Mounting bracket This mounting bracket is used to fix the flame detector at the correct angle. Ball and socket joint for DF 1191 / 1192 / 1101 Ex Ball and socket joint The ball and socket joint is used to line up the flame detector with the object to be monitored. Current limitation resistor for DF 1191 / 1192 / 1101 Ex Current limitation resistor 470 , 5%, 2W 1110089 6800081 6800080 6800079
End of line resistor for DF 1191 / 1192 End of line resistor 3k 3k , 1%, 0.6 W , 1%, 0.6 W 1130262
Test lam for DF 1191 / 1192 / 1101 Ex Flame detector test lamp for non-explosion hazard areas for explosion hazard areas
Securiton Product Catalogue 2007 - SecuriPro
On request
53
54
Manual call point, EN54/BS, IP 67 MCP 545-4 Single action break glass, according to EN54-11. Delivered with transparent plastic cover and with test key. for high humidity environment conditions Integrated status LED integrated SecuriLine interface for automatic addressing and automatic short circuit isolation by fully functionality of the multifunctional detector loop SecuriLine. Technical data Operating voltage Operating current (norm) Ambient temperature Protection class Colour Dimensions (W x H x D)
Securiton Product Catalogue 2007 - SecuriPro
225799
Manual call point, Vds, IP 52 MCP 535-1 Double action break glass, according to VdS. Delivered without inscription label and key, to be ordered separately. for dry rooms surface or flush mounting key protected integrated status LED blue and yellow versions available IP54 versions available integrated SecuriLine interface for automatic addressing and automatic short circuit isolation by fully functionality of the multifunctional detector loop SecuriLine. Technical data Operating voltage Operating current (norm) Ambient temperature Protection class Colour Dimensions (H x W x D) VdS-Number Manual call point, VdS, IP 54 MCP 535-2 Same as MCP 535-1, except: Protection class IP 54 6200146-0002 6200146-0001
15 to 30 V DC max. 0.25 mA -20 C to +50 C IP 52 red, RAL 3000 135 x 135 x 37 mm G 299036
56
57
Manual call point, Ex proof FTX 515 Single action break glass, for hazardous areas. The detector offers IP67 class protection. The cable entry occurs via means of cable screw connection from below. surface mounting connection to SecuriLine via MDI82 Technical data Operating voltage Operating current (normal) Ambient temperature Protection class Colour Dimensions (W x H x D) Certificate Number Manual call point, VdS, Ex, IP 52 MCP 525-1 Double action break glass, according to VdS, ATEX approved. Delivered without inscription label and key, to be ordered separately. for dry rooms surface or flush mounting connection to SecuriLine via MDI82 key protected integrated status LED blue and yellow versions available IP54 versions available For Ex-zone 2 Technical data Operating voltage Operating current (normal) Ambient temperature Protection class Flammability protection cat. Colour Dimensions (H x W x D) VdS-Number Ex approval Manual call point, VdS, Ex, IP 54 MCP 525-2 Same as MCP 525-1, except: Protection class IP 54 6200149-0002 6200149-0001 203793
max. 30 V DC 0 mA -30 C to +70 C IP 67 red, RAL 3001 120 x 126 x 75 mm BAS02 ATEX2105X
15 to 30 V DC 0 mA -20 C to +50 C IP 52 EEx n l IIB T6 red, RAL 3000 135 x 135 x 37 mm G 299102 PTB 01 ATEX 2163 X
58
4.10
Accessory for MCP GLASS MCP Spare break glass for MCP VdS types. MCP 525, MCP 535 Delivery unit 1 (10?) pce. Accessory for MCP KEY MCP Key to open the MCP. MCP 525, MCP 535 Accessory for MCP Inscription label MCP525/535 Inlay label for the MCP 525/535, with Logo Securiton. Available in the following versions [Language/Text]: German / Fire brigade (0001); German / House Alarm (0003) English / Fire Alarm (0011) Italian / Fire (0016) Swedish / Fire (0021) Croatia / Fire (0026) Russian / Fire (0031) Czech / Fire (0036) Hungarian / Fire (0041) Slovakian / Fire (0046) Polish / Fire (0051) Portuguese / Fire (0056) Spanish / Fire (0061) Neutral (0100) Accessory for MCP CPS 845 Seal for locking the MCP EN54/BS types. MCP 545-x,MCP521-1,ECP521-1E,FTN516,FTX515 Delivery unit 5 pcs. Accessory for MCP UP Set Adapter Plate for MCP 521-2 and MCP 545-2
Securiton Product Catalogue 2007 - SecuriPro
6200010
6200147
3740835-xxxx
222860
193801
59
4.11
Wireless detectors
RSD 532 Wireless smoke detector, complying with EN 54/7. Early detection of smothering and open fire with smoke emission. High reliability of the radio connection through the use of 28 channels in 2 frequency ranges. The radio system is fulfilling the highest existing standard for intrusion systems VdS class 2. The radio master unit RMU 251 is the interface to SecuriPro and controls up to 32 RSD 532. The RSD532 is delivered inclusive socket, without battery. addressable self monitoring of all detector parts periodical radio link test pre-warning levels for smoke adjustable sensitivity constant sensitivity through dust compensation 2 contamination levels 2 battery warning levels socket switch for monitoring against detector removal up to 5 years battery lifetime Technical data Operating voltage Operating current (average) Radio frequency bands Ambient temperature (permanent) Protection class Colour Dimensions (D x H) Complies regulation VdS-Number 5000593-0201
3 V DC 0.12 mA 433.15 to 434.65 MHz 868.07 to 868.53 MHz -20 C to +60 C (incl. USB 501) IP 42 white 80 x 92 mm EN 54/7 and EN 54/5 G 205098
Battery for radio smoke detector LBP 301 Lithium Battery Pack for RSD 532 4000256-0201
60
Radio contact module RCM 51 Wireless contact detector module, having 4 surveyed alarm lines. Any kind of contacts can be monitored and transmitted to Se curiPro , typically magnet contacts for doors and windows and glass break detectors.. High reliability of the radio connection through the use of 28 channels in 2 frequency ranges. The radio system is fulfilling the highest existing standard for intrusion systems VdS class 2. The radio master unit RMU 251 is the interface to SecuriPro and controls up to 60 RCM 51. The RCM 51 is delivered without battery. Each line individually addressable periodical radio link test magnet for window or door monitoring available (option) up to 3 years battery lifetime Technical data Operating voltage Operating current (average) Radio frequency bands Ambient temperature (permanent) Environmental class VdS 2227 Colour Dimensions (L x W x D) 5700145-0101
3.6V DC 138 to 258 mA 433.15 to 434.65 MHz 868.07 to 868.53 MHz -5 C to +45 C I RAL 9003 190 x 54 x 23.4 mm
Battery for radio contact module LBP 303 Lithium Battery Pack for RCM 51 4000266-0201
Permanent magnet for radio contact module PMA 41 For external mounting beside the RCM 51 module. Activates the RCM internal reed contact 234990
61
62
Siren, 24V SP 205 Acoustical alarm device for fire alarm systems. Surface mounting. 1 signal tone, 2.3 Hz modulation Technical data Volume Operating voltage Operating current Ambient temperature Protection class Dimensions (H x W x D) Colour Siren, for mounting in detector socket USB501 SIR 715 Electronic siren for mounting into the detector socket base USB501-x. The siren is driven directly from the fire alarm detector. At the socket terminal, either a socket siren or a room indication lamp can be connected. 1 signal tone, 4 Hz modulation Technical data Volume Operating voltage Operating current Ambient temperature Protection class Dimensions (H x W x D) 218847 6300068
ca. 60 dB (A) in 1 m distance +6 to +10 V DC max. 5 mA 0 C to +60 C mounted in USB 501 35 x 152 x 10 mm
63
LSW 750 For use in a SecuriPro Fire alarm system. This low power siren is designed to connect directly to SecuriLine via 2 wire. No further power supply line is necessary. It is activated and powered from SecuriLine. 3 signal tones, hard wired controllable volume 2nd tone for 2 stage alarm also available in white colour integrated SecuriLine interface for automatic addressing and automatic short circuit isolation by fully functionality of the multifunctional detector loop SecuriLine. Technical data Volume Operating voltage Operating current Ambient temperature Protection class Dimensions (H x W x D) Material Colour
4300873-0201
64
65
5 to 30 V DC max. 3 mA 4A 9A 40 x 23 x 15 mm
66
5600075
4.5 m
5600076
5.5 m
5.5 m
4.5 m
67
Telescopic pole UTP 6 Pole for various detector removal and test devices. Technical data extendable from Telescopic pole UTP 7 Pole for various detector removal and test devices. Technical data extendable from Telescopic pole extension UTP 5 Extension piece 1.35 m for the telescopic pole types UTP 6 and UTP 7. Technical data Working height up to Smoke test aerosol 918/5 test gas can For function test of approx. 200 smoke detector in maintenance mode. Free of halogenated hydrocarbons. 6900124 3330253 5600073 5600072
1.7 to 3.0 m
2.2 to 4.0 m
6.0 m / 7,00 m
Detector protection basket SRS 01 Basket against mechanical damages. Suitable for detector series SecuriStar and 130. Technical data Material 5000586
Steel, nickel-plated
68
153 x 67 x 102 mm 12 V DC 7 Ah
153 x 92 x 102 mm 12 V DC 12 Ah
69
Battery Battery 18 Ah 2 units necessary for 24V systems VdS approved Technical data Dimensions (H x W x D) Operating voltage Capacity Battery Battery 26 Ah 2 units necessary for 24V systems VdS approved Technical data Dimensions (H x W x D) Operating voltage Capacity Battery Battery 45 Ah 2 units necessary for 24V systems VdS approved Technical data Dimensions (H x W x D) Operating voltage Capacity Battery Battery 65 Ah 2 units necessary for 24V systems VdS approved Technical data Dimensions (H x W x D) Operating voltage Capacity 2310006 2310003 2310002 2310034
183 x 78 x 169 mm 12 V DC 18 Ah
70
71
Power Supply Unit EPSU 24/10 Power supply unit for EPSU. Technical data Operating voltage Output voltage Output current Dimensions (H x W x D) Protection category Case Colour Weight VdS-Number Power Supply Unit EPSU 24/03 Same as EPSU 24/10, except: Output current max. 3 A. This product is in preparation and is not available at this moment. Temperature Sensor for EPSU 24V/10A EPSU TEMP Temperature Sensor for EPSU 24V/10A To ensure optimal battery charging conditions, the power supplys charging voltage is checked by an external temperature sensor module. Intolerable battery temperatures of over 45 C are displayed by the built-in LEDs on the front side of the EPSU 24/10. The use of this temperature is according to the VdS regulations compulsory and not an option. Cabinet for additional batteries EPSU BAT Cabinet for additional batteries max. 4x45Ah 6100030-0103 4400053 4400052
230 VAC 19.8 26.4 VDC max. 10.0 A 160 x160 x 90 mm IP 20 light grey RAL 7035 1.7 kg G 297034
72
7. Commissioning tools
Commissioning set standard, for SecuriPro IBS Standard Tool set for commissioning, bug fixing, maintenance and test of SecuriPro installations. The set consist of the following parts: SecuriLine Monitor, including flat cable for connection to the SCB01 Serial-LON-Talk-Adapter SLTA Connection cable, SLTA-SecuriLan Adapter plug, SLTA cable-SecuriLan Key, type DOM Standard PC communication cable 9 pin GALEP EPROM programmer IC removing tool PLCC Antistatic mat with accessories Tool-suitcase SecuriLine tester STB 01 A Hand held control device for testing and trouble shooting of the SecuriLine installation and their participants. Includes the AD/DC adapter (230VAC/24VDC) and an RS232 serial interface to a PC. 6900376
VE010903
Radio Tool Connection Set, for SecuriPro RTC 95 Special flat-type communication cable to be connected between the RSI 51 and a computer. This cable allows the RSI 51 box to be closed during a long term data logging Range Measuring Equipment for radio detectors, for SecuriPro RME 961 Using the RME 961 (Radio Measurement Equipment) and a laptop, the best possible location for the RDS 96 (detector simulators) and the RMM 96 (remote antenna) can be determined. Sources and transmitters that cause disturbances can be found using measured values. Data gathering on the PC permits longterm tests and detection of sporadic disturbances. The RME 961 is a suitcase, containing the following parts: Radio detector simulator RDS 96 (4 pcs.) Antenna: RMM 96 pre-fabricated with 10 m cable and connector Radio measurement interface RMI 96 12V DC plug-in power supply unit RS 232 serial connection cable USB serial converter with CD-ROM Tesa Powerstrips, large Lithium Battery Pack LBP 303
Securiton Product Catalogue 2007 - SecuriPro
4300876
230804
73
8. Software
PC Software for SecuriPro SecuriWin PC Software for personalizing, commissioning and test of SecuriPro fire alarm systems. Interface licence SIB-IF-LICENCE Interface protocoll for Alarm Management Systems. Connection via SIB71 module VE010810 VE010809
74
4300529-0002
4300528-0002
94300833
4300773-0002
75
MIC732 spare front MIC 732-02 Spare Front for MIC 732 incl. ICB 05, ICB 02, LCD and hole for key switch MIC734 spare front MIC 734 Spare Front Spare Front for MIC 734 incl. ICB 05, ICB 12, LCD 02 and hole for key switch ILP 151 printer module LPM 151 Spare LPM 151 printer module 4300763 95300671 5300643-0002
3610319
Securiton AG, Alarm- and Security Systems Alpenstrasse 20 CH-3052 Zollikofen/Berne Phone +41 31 910 11 22, Fax +41 31 911 25 32 www.securiton.eu - export@securiton.ch Securiton Product Catalogue 2007 - SecuriPro
Representative Office Asia No. 19A, Lorong Rahim Kajai 13 T.T.D.I. 60000 Kuala Lumpur, Malaysia Phone. +60 3 7725 1699, Fax +60 3 7725 1677 www.securiton.eu - asia@securiton.com.my
76