Well known brands, highest levels of quality and functionality for every aspect of building services.
4 3 5 10 6 12 11 M
"
3 5 6 12 11 M
A range of products to allow comprehensive control of all the lighting within the building.
Pump and Fan Speed Control Pump and Fan Motor Control Digital Controllers
A wide range of variable speed drives to fit a variety of buildings applications. Improve performance, reduce maintenance costs and save some energy with a variable speed drive solution. Increase the life of the motors used within the building by applying soft start control techniques.
Complete range of digital controllers having advanced web serving capabilities. Simple input/output structure to allow complete flexibility in the layout and design of the building management system. Complete range from unitary single function controllers to full freely programmable controllers all available in standard DIN mounted packages. Complete range of sensors designed to collect information from the building environment. Complemented by a complete range of actuators to provide the necessary control of plant. To simplify the installation of the electrical and mechanical services. Choose from a wide range of panel equipment products designed to make life easier. Enhanced range of Gateway units allowing fieldbus devices the ability to connect straight to the ethernet (LAN) communications backbone. Complete range of industrial design Ethernet hubs/routers and switches to ensure reliable data transmission.
8 3
LON Works
Sensors/actuators
6 12 11
"
13 M
10 Panel Equipment
User interface
11 Gateways
12 Networking Components
13 User Interfaces
Range of operator interface panels from simple two line alfanumeric to colour touchscreen versions. Full communications capabilities to the controllers enabling easy control of the system. A comprehensive library of software programs to allow complete monitoring and control of the building.
Supervision software
14 1 2
14 Supervision Software
Description
Sepam 2000 is a multi-function microprocessor protection relay.
Description
Modular medium voltage protection relay to make life easier, designed to evolve in step with one electrical installation.
Description
Medium voltage outdoor switchgear interface unit. Provides the necessary control and monitoring for the Ringmaster range of ring main units and extensible switchboards.
Description
Fully integrated range of protection relays for the low voltage air circuit breakers.
Description
Complete range of main low voltage circuit breakers with integral communicating protection and measurement relays.
Description
Range of integral protection relays with advanced communication capabilities.
Features
Control and monitoring of the associated medium voltage circuit breaker or contractor Integrated power measurement Remote control capabilities (open/close/reset) Visibility of protection settings Waveform capture during fault conditions to determine status of switchgear Operator display for fault messages Comprehensive protection library Modbus communications
Features
Remote monitoring and control of device Integrated power management Remote visibility of protection settings remotely Optional measurement and communications of harmonics up to the 51st Fault identification and remote diagnostic information On-board event log to capture faults that appear on the electrical network Programmable load shedding/load restoration functions
Features Features
Advanced protection functions Remote monitoring of the following functions: three phase currents maximum demand protection settings switchgear status Modbus communications via PowerLogic network interface units SC150 and DC150 Communications for MCCB moulded case circuit breakers from 160A 1250A Remote transmission of the following data: three phase currents maximum demand protection settings remote control status indication Modbus communications via PowerLogic network interface units SC150 and DC150
Features
Compact design, which can be assembled in the ideal location to simplify operation Advanced HMI (Human Machine Interface) provides simplified operation and maintenance Remote control and monitoring Embedded Modbus communications Remote visibility of the following data: three phase currents maximum demand protection settings
Features
Modbus communications Comprehensive battery charging/monitoring for remote control of circuit breaker under power loss conditions Remote control and status indication of the switchgear/ circuit breaker A number of units can be linked to provide automatic reconfiguration of the medium voltage supply network
Lighting Controls
A range of products to allow comprehensive control of all the lighting within the building.
Dimming modules
Switching modules
Description
Complete range of metering units to allow energy data to be collected.
Description
The PowerLogic Power Meter is a cost effective, high performance meter. It can operate as a standalone device or as part of a PowerLogic system.
Description
LON based controllers allowing simple on/off programmed sequences to be performed.
Description
For higher capacity switching requirements or many channels of lighting circuits, the Momentum range of building controllers is the ideal choice.
Features
Comprehensive power monitoring: Revenue-class accuracy 0.2% current/voltage Time/date stamping Digital and analogue I/O Digital and analogue I/O to allow other metering units/transducers to be used e.g. water, gas, etc. Advanced communication using Modbus or Modbus TCP/IP protocols Fully integrated web-serving module, allowing all the data to be viewed using standard Internet browser software Analysis and recording: Harmonics analysis Voltage disturbance records On-board memory to store data and events
Features
Compact DIN rail mounted 16A single channel 4 x 8A channels switching LON Mark compatible service
Features
An economical metering solution Ease of installation Modbus communications allowing remote meter reading LCD Display Designed for reliability
Features
DIN rail mounted small footprint AC or DC power supply options Optional web-server module for remote control of lighting Modbus or Modbus TCP/IP communications Optional processor module to allow complete control of area in the event of communications loss
Description
Complete range of dimming modules for lamps up to 1kW.
Features
Full LON Mark devices 1 10v analogue output DIN rail mounted Low power consumption
Lighting Controls
Presence detection
Local controls
Altivar 08E
Altivar 28
Altivar 28E
Description
Passive infrared or photo detector range allowing complete feasibility for every application.
Description
Stylish design to complement any workspace. LON based infrared transmitter/receiver devices allowing remote manual control.
Description
The Altivar 08E is a compact, functional drive that has been developed to control low power motors. Suitable for simple motor control applications and ideal for replacing mechanical and electro-mechanical solutions.
Description
The Altivar 28 is a sensorless flux vector drive, in a simple compact design with a high level of versatility.
Description
The Altivar 28E is a sensorless flux vector drive, in a simple compact design with a high level of versatility.
Features
Internal or external versions 250v AC switched versions Complete LON Mark range of devices for indoor applications (24v DC/230v AC) Integral light sensitive element to prevent lights being operated during daylight hours
Range
0.75 15 kW
Range
0.75 4 kW
Features
European style front plate Matched infrared transmitter/receiver All functions accessible via IR transmitter Low power consumption
Range
0.18 0.75 kW
Features
In-built application functions Local or remote control option Integrated EMC filters Side by side mounting IP21 Integrated mobus communications In-built PI regulator
Features
In-built application functions Local or remote control option Integrated EMC filters Side by side mounting IP55 Integrated mobus communications In-built PI regulator
Features
Easy to install Integrated RFI filters In-built drive and motor protection Compact design High ingress protection IP65
Application examples
Small fans Boilers Condensed water pumps
Altivar 38
Altivar 58
Description
The optimum speed drive for pump and fan applications. Simple and easy to install, commission and maintain with the functionality and options required.
Description
The Altivar 58 is a sensorless flux vector drive in a modular design to offer a small, versatile inverter delivering outstanding performance across a wide application range.
Description
The Altivar 58 is a sensorless flux vector drive in a modular design to offer a small, versatile inverter delivering outstanding performance across a wide application range.
Description
The LH4 soft start reduces mechanical stress by eliminating sudden torque changes on starting and stopping. Increase the life of drivebelts, chain and shaft drive by utilising smooth acceleration ramps.
Description
The Altistart 48 is a new concept in motor starting. The torque control system enables linear acceleration and deceleration without external feedback, allowing a more flexible and precise control over motor starting.
Description
The enclosed soft start is easy to apply to new or existing applications. Each unit comes complete and ready to install.
Range
0.75 315 kW
Range
0.75 75 kW
Range
0.75 75 kW
Range
0.9 21A
Features
In-built application macros Local circuit breaking and isolation of the motor Protection for the drive and motor Building services communication options, including LON Work, Johnsons N2 and Modbus Ethernet option with in-built webserver Application options including pump switching card
Features
In-built application macros IP21 Removable operators terminal Wide range of networking capabilities including ethernet with in-built webserver and Modbus communications In-built PI regulator Registered for enhanced capital allowance
Features
In-built application macros Removable operators terminal Wide range of networking capabilities including ethernet with in-built webserver and Modbus communications In-built PI regulator Registered for enhanced capital allowance Totally enclosed version (IP55 available)
Range
0.9 80A
Range
4 1200A
Features
Integrated isolator local/remote key switch and pushbutton control IP54 protection Pre-wired power terminals Undervoltage trip available as option
Features
DIN rail mounting Indication LEDs Set up via three simple dials No programming required Internal bypass circuit
Features
Local display Integrated modbus 485 Communication gateways available Inbuilt thermal protection Assignable I/O
Application example
Utility water pumps
Application example
Compressor applications Chilled water units
Application examples
Compressors Supply/extract fans
Application example
Compressor or chiller starting
Digital Controllers
Complete range of digital controllers having advanced web-serving capabilities. Simple input/output structure to allow complete flexibility in the layout and design of the building management system. Momentum BC1 Micro BC2 Premium BC3
A range of simple starters for every pump and fan application in the building.
Enclosed D.O.L
Description Description
The LE1 enclosed direct on-line starter range offers a convenient method of starting, contacting and protecting pump and fan applications.
Description
The next level controller up from the Momentum having greater processing power and I/O capabilities. Comprising a rack, which integrates a power supply and processor, with two or three slots into which additional discrete I/O, analogue I/O, counter modules, communication modules and safety modules may be fitted.
Description
More powerful controller for demanding applications. A rack based system enabling the modules of a controller to be fitted power supply, processor, digital I/O, analogue communication, modules and other application specific modules. Up to 16 racks may be distributed over a bus, up to 100m in length, without the need for extra hardware.
Description
As for the DOL range, the LE3 enclosed range offers the same degree of benefits for star delta starting.
Remote I/O system constructed from up to four fundamental components that easily snap together in various combinations to form versatile control systems. The four components are: I/O bases Communication adapters Processors Option adapters
Range Range
1 80A 4 265A
Features Features
Range of factory assembled options available IP55/65 protection Available in a range of enclosure types Communication options available Available with or without pushbutton control IP55/65 protection Adjustable starting times
Features Features
Analogue/digital or mixed I/O combinations Thermocouple inputs Up to 32 I/O Extendable by master/slave with other momentum BC1 units Processor option to ensure local controls remain in the event of comms bus failure Optional web server module allows direct interrogation via browser software Communications supported include Modbus/Modbus ethernet Battery back up option Single or dual programming ports Up to 248 I/O Combined I/O and variable display Single or dual programming ports Supports multiple protocols at once Web server option to allow direct connection to the local area network Easily upgradable by adding plug in I/O Can be re-programmed remotely on-line or off-line
Features
4, 6, 8 or 12 way racks 2048 digital and 256 analogue I/O Optional web-serving module to allow remote access/monitoring via Ethernet or the World Wide Web Modbus and Modbus TCP/IP protocols supports Safety relays can be embedded to provide secure shutdown sequences in the event of failures within the building 96k on board RAM PCMIA memory extension 256k option
Application example
Local pump or fan control
Application example
Local pump or fan control
Digital Controllers
LON Works
Complete range from unitary single function controllers to full freely programmable controllers, all available in standard DIN mounted packages.
Quantum BC4
Description
Most powerful controller within the range. The Quantum platform offers the right solution for high performance applications. It provides flexible I/O configurations and powerful performance. A wide range of modules and fieldbus connections are supported as well as its innovative web server module.
Description
Freely programmable LON based controller with plug in high power switching relay option.
Description
Unitary controller range designed for plug and play functionality for the control system.
Description
Simple PT1000 sensor range designed to work with the entire range of LON and building controllers.
Description
Complete range of programmable LON Mark compatible devices, from arithmetic to logic modules.
Features
64kb flash ram DIN rail mounted 24V DC power supply FTT10 LON interface 8 inputs/8 outputs Analogue inputs (0 10V/4 20mA/Resistive) Analogue outputs (0 10V)
Features
DIN rail mounted Simple interfacing Wide selection of control devices: fan coil controllers time scheduling electric/water radiator controllers front controllers boiler controllers user interface modules
Features Features
Compact design Simple installation Self powered Accurate Range includes: duct space outdoor immersion pin DIN rail mounted LON Mark compatible devices Small footprint Available modules include: arithmetic logic module status module I/O module (2 x DI, 2 x AI, 3 x DO, 1 x AO 0-10v). Room controllers pre-programmed for heating/ventilation/presence detection and lighting control
Features
2, 3, 4, 6, 10 or 16 slot backplanes Flash memory with battery backup. A wide range of I/O modules including a timestamp module with Ims resolution using the GPS satellite system, motion modules and 96 point high density modules Option adaptors Up to 2.5mb on board RAM 64000 I/O point capacity Wide variety of communications options and protocols Can be programmed on-line or off-line Web server module allows access to data from any computer either on or off site
Sensors /Actuators
Complete range of sensors designed to collect information from the buildings environment. Complimented by a complete range of actuators to provide the necessary control of plant. Duct sensors Outside air sensors Immersion sensors
Sensors /Actuators
Space sensors
Pressure sensors
Description
A low cost, direct output temperature sensor used to measure air temperature in ducts. Units contain either a high quality thermistor, nickel or platinum sensing element suitable for use in the range -10C to +60C.
Description
Low cost, direct output temperature sensors for measuring outside air temperature. Units contain either a high quality thermistor, nickel or platinum sensing element, suitable for use in the range -40C to +60C.
Description
Immersion sensors are used for measuring the temperature of liquids in pipework. Units contain either a high quality thermistor, nickel or platinum element.
Description
A low cost, direct output sensor used to measure air temperature in indoor spaces. Units contain either a high quality thermistor, nickel or platinum sensing element.
Description
Comfort temperature measurement can be best achieved by taking into account the radiant effect of surfaces within the controlled space. The comfort temperature is specified as the average of the conductive temperature and the radiant temperature.
Description
Nautilus pressure switches from Telemecanique are easy to set up and connect, are reliable and robust and can be used for a variety of different applications, such as lifting platforms, air conditioning and packaging.
Features Features
The sensors are housed in IP67 rated enclosures Fast response times to changes in outside air temperature Protected against the element from the effects of direct sunlight Variety of sensors that can be used for: High temperature applications, such as boiler flues and medium/high temperature hot water systems up to 400C Supplied in standard lengths of 150mm to 230mm Fitted to an IP67 rated enclosure
Features
Ambient range of -10C to +60C Dimensions are 83mm x 83mm x 27mm
Features
Sensing element is fitted into a 150mm long brass probe with holes to allow air to flow directly over the sensing element The IP67 rated enclosure has fixing lugs for direct duct mounting A neoprene gasket is supplied to seal onto the duct Flange plate is available for adjustment of penetration depth
Features Features
Low cost black bulb temperature sensor used to measure radiant heat in indoor spaces Can be used for mounting outside Units contain either a high quality thermistor, platinum or nickel sensing element Most types of fluids controlled from steam to corrosive fluids Pressure ratings from 1bar (vacuum) to pressures of 600 bars Electro-mechanical switches with fixed or adjustable differential Electronic switches with solid state and analogue outputs
Sensors /Actuators
Sensors /Actuators
Photo-electric detectors
Proximity switches
Modulating actuators
Description
The XUK range of photo electric offer the most comprehensive range of 50 mm x 50 mm format sensors in the market place. They offer complete flexibility, protection against cross interference and are reliable for detection of shiny surfaces.
Description
The XS1N range of proximity switches provide optimum performance, allowing extended maintenance free operation. They are extremely competitively priced and are ideal for confined spaces.
Description
The VA/DA range of actuators require a 24 AC/DC or 230V AC supply and can accept either an on/off or floating (raise/lower) control signal output. They are available in 4, 8, 16, 32Nm torque ratings and can have auxiliary switches and feedback potentiometer options fitted. The direction of rotation can be reserved and the angle of mechanical travel can be limited by up to 30C from either end.
Description
The VA/DM range of actuators require 24V AC/DC or 230V AC supply and accept a modulating control signal input. They are available in 8, 16, 24 or 32Nm torque ratings and can have auxiliary switch options fitted. The direction of rotation can be reversed and the angle of mechanical travel can be limited by up to 30 from either end.
Description
The VC range of 2 and 3-port valves for modulating and on/off control applications.
Features
PNP/NPN output Universal AC/DC relay output Light or dark programmable switching Stability LED IP65 protection
Features
Short body from 33mm Fast switching up to 5kHz 200mA switching capacity Overload and short circuit protection Pre-wired or plug-in connection
Features
Reversible rotation Mechanically set rotation limits 0-10V DC or 4-20mA input control signal
Features
Reversible rotation Mechanically set rotation limits On/off or floating input control signal Up to 20 actuators can be connected in parallel
Panel Equipment
To simplify the installation of the electrical and mechanical services. Choose from a wide range of panel equipment products designed to make life easier. Sarel enclosures TeSys Tego Power
Panel Equipment
Power supplies
Pilot devices
Terminal blocks
Description
The Sarel range of enclosures includes wall and floor mounting options on a variety of different materials, including steel, glass re-inforced polyester and stainless steel and a variety of protection rating IP66.
Description
The TeSys range sets new standards in power, control and protection components for industrial automation applications. Innovations in design and safety associated with the traditional features of the world leading d range ensure that TeSys is the first choice for todays demanding user.
Description
Tego Power is a modular system, which standardises and simplifies the implementation of motor starters with is pre-wired control and power circuits.
Description
The 4BC range of power supplies and transformers offer a multitude of options to the system designer and panel builder alike.
Description
The Harmony range of pilot devices gives the full compliment of indicators and control components for the panel facia incorporating pushbuttons switches and indicators.
Description
Schneider Electric offer a range of screw and spring loaded terminal blocks for use in control panel construction. Ranging from a current carrying capacity of up to 46 amps. Flexible terminals for all your power and control requirements.
Features Features
Designed for use with the popular ranges of K and D contactors from Telemecanique and with GV2 motor protection circuit breakers Simply connect contactors and circuit breakers to complete a full starter, and then clip it into a sub-base. All necessary control and power connections are made automatically Tego Power can handle direct on line and reversing starters of up to 18A (1.5kW at 415V) Communication couplers are available with screw terminal or Telefast connectors. Couplers for AS-i, Interbus S, Profibus DP, DeviceNet, CAN Open and FIP are also available Switch mode PSU Rectified PSU AC transformers offering an output of: 12, 24, 48v DC 12, 24, 48, 110, 240v DC
Features
Standard 22mm facing Inter-changeable sub-assemblies Labels available Simple locking system for quick and easy installation
Features
Integral backplates Mounting options Gland plates Handle and lock options
Features
Each contactor has a snap-on safety cover to prevent manual operation Separation of control and power circuits reduce the chances of wiring errors 1 N/O and 1 N/C auxiliary contact are built-in as standard on all ratings to simplify design and selection Full range of complementary accessories to support flexible design requirements Four different connection solutions to meet all requirements Quickfit spring terminals Screw, ring and faston terminals
Features
Specific terminals of neutral and earth connection Fused terminals available Diode terminals available All terminals suitable for all types of mounting rail
Panel Equipment
Gateways
Enhanced range of Gateway units allowing fieldbus devices the ability to connect straight to the Ethernet (LAN) Communications backbone.
Interface units
Intelligent relays
Panel components
EGX 200
EGX 400
ECC21
Description
Schneider Electric can offer a complete range of interface units to meet your demands. The range includes control relays, timing relays and interfaces for analogue signals.
Description
The Zelio Logic range are compact programmable relays capable of many automated applications. Up to 20 I/O points can be accommodated as standard, with extension module available.
Description
To ease the installation of all panel equipment Schneider Electric offer a full range of ancillary equipment to ease the panel construction.
Description
Modbus to Modbus Ethernet convertor allowing real time data to be transmitted from the devices to suitable software servers.
Description
Larger memory capacity device for customised web page development, allowing real time data to be viewed over the web.
Description
The optional ECC21 card for the CM4000 and CM3000 Circuit Monitors enables direct connection to an Ethernet LAN/WAN. Onboard web pages allow viewings of real time data from a connected browser across five pre-defined pages which can be customised by the end user. These pages can also display data from slave devices daisy chained on a circuit monitors RS-485 port.
Features
DIN rail Trunking Connectors/crimps Telefast wiring systems Power distribution busbar Mounting plates Fixing accessories
Features
DIN rail or panel mount 24V DC power supply Two RS485 ports each with 32 connected devices (64 max) Interface unit for the following range of Electrical Metering and Monitoring devices. Sepam 1000+/2000 Power meters/circuit monitors Low voltage switchgear Third party Modbus devices
Features
Up to ten customisable web pages 8mb on board memory DIN rail or panel mount 24V DC power supply Two RS485 parts each with 32 connected devices (64 max)
Features
Plug in relays two and four pole Holding features Analogue and digital interface modules
Features
Simple programming software Starter pack available 24 or 240V versions Digital and Analogue I/O Clear text display
Features
Five web pages Direct connection of the circuit monitor to the Ethernet network RS485 serial port to allow communications to other switchgear/devices
Application example
Parking barriers Automatic doors Escalators Pumping systems
Gateways
Networking Components
Complete range of industrial design Ethernet hubs/routers and switches to ensure reliable data transmission
Jace NP
Jace 5 series
Hubs 4 TP and 4 TX
Hubs 3TP/2FL
Description
Compact PC platform based on the same feature set as the Jace 5 series of controllers, but with additional functionality such as larger on board memory for data logging capabilities.
Description
Stand alone controllers designed to integrate many protocols to a common TCP/IP web-based server.
Technology
Ethernet 10Mbps/Fast Ethernet 100Mbps
Technology
Ethernet 10Mps
Technology
Ethernet 10Mps/Fast Ethernet 100Mps
Interface Interface
4 x 10BaseT (RJ45) 4 x 100BaseTX (RJ45) 3 x 10BaseT (RJ45) 2 x 10BaseFL (ST)
Interface
1 x 10BaseT (RJ45), 1 x 10Base FL (ST) 1 x 100BaseTX (RJ45), 1 x 100Base FX (SC)
Features
Embedded power PC platform Java application control engines Multiple protocol support including: LON Works FTT10 Modbus TCP/IP Bacnet* Modbus* others (upon request)* Full web serving capabilities can be viewed locally or remotely from anywhere using standard browser software
*via two RS485/232 interfaces
Features
Stand alone configuration Multiple communication ports supporting simultaneous protocols e.g. Modbus Modbus TCP/IP Bacnet LON Works others upon request Distributes real time control and building automation functions across an Ethernet network
Redundancy Redundancy
Power supply Power supply Optical ring structure
Redundancy Features
Potential-free contact to indicate defaults Maximum number of cascaded hubs: four Connect segments to supply shared communication among building controllers Enable communication with devices such as Momentum I/O
Features
Potential-free contact to indicate defaults Maximum number of cascaded hubs: eleven
Power supply
Features
Potential-free contact to indicate defaults Auto sensing half/full duplex Secure transmissions in areas of high electromagnetic interference Cable long distance between islands
Networking Components
User Interface
Range of operator interface panels from simple two line alfanumeric to colour touchscreen versions. Full communications capabilities to the controllers enabling easy control of the system.
Bridges
Technology
Ethernet 10Mbps/Fast Ethernet 100Mbps
Technology
RS485, Ethernet 10Mbps Modbus Plus, Ethernet 10mbps
Description
The suite of operator terminals to suit the needs of building automation from simple text displays, through semi-graphic displays to advanced graphical terminals for full graphical mimic of building.
Interface
5 x 10BaseT/100Base TX (RJ45), 2 x 100 Base TX (RJ45) 5 x 10BaseT/100Base TX (RJ45), 2 x 100Base FX (SC) 8 x 10BaseT/100Base TX (RJ45)
Interface
RS486, 10BaseT (RJ45) Modbus Plus, 10BaseT (RJ46)
Redundancy
Power supply
Redundancy
Power supply Optical and/or copper ring structure Fast media redundancy (<0.3s) Double ring structure
Features
Transparent communication between device(s) on Ethernet Modbus TCP/IP and device(s) on RS485 Modbus, or between devices on Ethernet Modbus TCP/IP and devices on Modbus Plus
Features
Touchscreen operation for quick and easy pinpointing of alarms and access to data Full graphical representation of installation report printing functions Full alarm management functions, with alarm data saved to permanent memory three levels of password Real-time trending of data variables easy program upgrades with plug-in memory cards System diagnostics pages built-in as standard Connection via standard serial communications or via Ethernet TCP/IP
Features
Potential-free contact to indicate defaults Management via Web Browser between islands
Supervision Software
A comprehensive library of software programs to allow complete monitoring and control of the building.
Supervision Software
Vijeo look
PowerLogic SMS
BCON
Description
This client-based supervisory software has advanced graphics and data recording. Full web-serving capabilities allowing access to the data from any PC.
Description
Monitoring and control software for the electrical equipment within the building. Full web-serving capabilities with simple pre-configured blocks to allow easy installation/upgrades.
Description
Flexible network server for all the ethernet connected controllers. Supports and integrates standard open protocols used within the building management systems such as Bacnet, LON Works and Modbus TCP/IP.
Description
Simple supervisory software for smaller buildings. Supported functions include: Lighting HVAC Security and CCTV Energy monitoring/analysis
Features
Ethernet TCP/IP communications Pre-configured HMI choose from a library of animated applets Supports all products (LON devices via suitable gateway e.g. Jace 5) Full report generation/historical recording Can be used to supervise industrial automation process as well as building control allowing a single point of control and monitoring for factories
Features
Powerful functions Waveform/Harmonic analysis Real time data (power/volts/amps) Alarm handling Full power network reconfiguration using building controller Switchgear maintenance history Energy analysis and reporting Supports all devices in the PowerLogic range and any other Modbus/Modbus TCP/IP compatible device
Features
Java enabled graphical interface Unlimited users over intra/internets using standard browser software Audit trail of users/changes to the system Database for alarms/logs/graphics Synchronises controller databases, central scheduling for the system, control and energy management Comprehensive on-line help (HTML format)
Features
SMS alarm notification Supports EIB Modbus and LON devices on the network Advanced graphical interface Web-serving capabilities Opc server based Can support many other third party protocols
Computer requirements
Windows 2000/XP
Typical Architectures
HVAC control and monitoring
In this example architecture, no PC is required, as the field devices have embedded web-serving capabilities. It demonstrates how the application of the Ethernet network can significantly reduce the amount of proprietary cabling installed in the building. All alarm handling and data logging is performed at the Jace NP unit hard drive for analysis at a later date. The RAS or Remote Access Server allows complete interrogation of the system from the Jace or other web-serving devices connected to the LAN.
Typical Architectures
Metering
In this example two circuit monitor devices are installed at each floor. They act as a data concentrator for the field sub meters, which maybe installed next to the electrical distribution boards. The circuit monitors act as the analyst in the floor, identifying and capturing events such as harmonics, undervoltages, currents etc. Each circuit monitor has an embedded web-server allowing the data to be viewed locally or remotely over the local area network. For historical data, PowerLogic SMS client/server suite is installed on a PC to trend and the record the data.
Web-server page
(HVAC)
MODBUS Web-server page FAN COIL FAN COIL FAN COIL PM 500 RAS VSD main Air Handling Unit MOMENTUM PREMIUM MODBUS Supervising PC + Data logging PM 500 Sub metering PM 500 CM 4000
Web-server page Heating plant controller PM 500 PM 500 Sub metering PM500
CM 4000
Local I/O
Web-server page
Web-server page
Typical Architectures
Typical Architectures
For the low voltage network a similar philosophy exists in that the devices all have Modbus communication capabilities which also allow them to be integrated into the web server module seamlessly. The Premium or Micro controller can be used to automatically run safe start-up/shut down sequences such as: Generator starting Load shedding Power restoration Time schedules All of the previous examples can use the same ethernet backbone allowing simple/open intelligent building management systems to be developed. Web-server page EGX 400
The system can use the same components to test the emergency lighting system via a standard web browser interface.
Web-server page
MOMENTUM
MOMENTUM
PREMIUM
High voltage circuit breaker Lights Web-server page Local I/O Lamps Web-server page
MOMENTUM
DC 15O
PREMIUM CONTROLLER
Web-server page Lights PIR Presence detection Input I/O to security system JACE 5 Web-server page MCCB MCCB Web-server page CIRCUIT MONITOR Dimmer LON LON LON LON CM 4000 MCCB MCCB
LON
LON
LON
VSD CONTROLLER
HMI
PM 500
PM 500
PM 500
Electrical power
Schneider Electric is involved in the entire electrical distribution chain from power plants to end users.
Infrastructure
Schneider Electric is involved in developing infrastructure and transportation systems around the world, in areas where no failures can be tolerated. Marine engineering Harbour installations Airports Rail transportation
CM 4000 Power generation and transmission Power plant MV/LV auxiliary equipment Transmission network monitoring and control HV substation monitoring and control Power distribution HV/MV and MV/LV distribution substations MV/LV supply substations MV and LV network management
HV
HV
Switchgear monitoring
Buildings
Schneider Electric has a wide range of attractive and functional products for the commercial, industrial and residential sectors. We can offer a range of solutions in the area of building management for cost effective building control. Stores Warehouses Hotels Offices Hospitals Retail outlets Single family homes
LV Devices
Industrial process
LON LON LON LON Lighting control To meet your needs in industry, we focus on performance in all areas. Our products adapt to each specific business and environment, from production lines to continuous processes in a variety of industries. Automotive Pharmaceutical Packaging Water Handling Food and beverage