Over the past two years we have focused on changing the nature of sub and final distribution.
The results of this are the new Invicta 3 Type B Distribution Board and Invicta 3 Panelboard ranges.
We also offer a range of SP&SN distribution board, fuse combination switches, switch disconnectors,
switch fuses and enclosed MCCBs.
Commercial
Distribution
A Boards, SP&N Distribution Boards 3.2
JK104
JK404H
JK304H
JK706C
Commercial
Distribution
Split Load with 100A Switch Disconnector and 100A 30mA RCCB
JK008
Customer Services Hotline • 01952 675612 Technical Support Helpline • 01952 675689 3.3
Invicta 3 A Boards
SP&N Distribution Boards
Invicta 3 SP&N distribution The range has the following Enclosures are available with
boards features: plain or glazed doors.
Boards are available with 14 & • Ample wiring space, with
29 outgoing ways. The range provision to accept RCBO’s For dimensions see page 3.5.
comes with a 100A 2P switch • Full complement of earth and
disconnector. neutral terminal bars to accept
up to 25mm2 incoming and
16mm2 outgoing cable
• Accepts most consumer unit
accessories
• Suitable for cable entry/exit on
all sides and back
JK114AG
Commercial
Distribution
Depth Width C
SP&N A Boards
A
Invicta 3 SP&N A Boards
B
Dimensions (mm) Fixing Centres (mm)
Height Width Depth A B C
Height
Depth Width
Customer Services Hotline • 01952 675612 Technical Support Helpline • 01952 675689 3.5
Invicta 3 Type B
Distribution Boards
125A and 250A boards with multiple
incomer choices
Our Invicta 3 type B distribution board is the solution for modern commercial installations. The Invicta 3
range includes both 125A and 250A boards with multiple incomer choices.
Our IP65 TP&N distribution boards are suitable for three phase applications where a high IP rating is
required.
Commercial
Distribution
125A Incoming 63A Outgoing
Distribution Boards 3.12
The whole nature of electrical sub and final distribution for commercial installations has
changed in the last few years. Typically there is a demand for more outgoing ways, more RCD
protection, more metering and more control devices.
1
Simple cable entry
The unique patented trunking and cable
entry facility means there is no need to
use paxolin. Cable protection is built into
the endplate cable entry.
2
Ease of metering
You can install a meter next to the
incoming device in the 125A board.
Dual metered boards are also available.
3
The neutral bars
Transparent IP2X neutral cover allows for
ease of cable installation. Screws fully
turned down for easy and fast cabling.
The plus:
Clear labelling
Ease of line identification
L1, L2, L3 mouldings show
through when front cover
is fitted.
Glazed door
The Invicta 3 distribution
board is arguably the best
looking board on the
market. Its glazed door
allows a visual check of
the devices without the
need to open the door.
Electrical distribution is at the heart of a buildings We decided that it was time to design a board that
services. Modern distribution boards must enable meets these growing needs. Our new range of type
designs that meet the demands of the 17th Edition, the B boards makes it easier for you to design and install
need for more metering and the demands for energy electrical distribution systems that meet the needs of
efficient solutions through control devices or building today and the future.
management systems.
Customer Services Hotline • 01952 675612 Technical Support Helpline • 01952 675689 3.9
Invicta 3 Type B Distribution Boards
Meeting the needs of the 17th Edition
The new Invicta 3 range of type B boards has been produced to meet with the new IEE Wiring
Regulations.
Take a look below to see all of the new features we have designed in and how this is going to
make installing a distribution board so much easier.
3
1
5
4
2
6
• The earth and neutral bars are positioned and designed for • 4, 6, 8, 12, 16, 18 & 24 triple pole outgoing ways.
simpler installation.
• IP3X.
• The neutral bars have transparent IP2X shrouding to make
cabling easier. • Obround protected cable entry points.
• The metering kits fit directly into the main board saving space • Top and bottom removable gland plates.
and saving you the expense of buying an extension box.
1 5
Top tap off New single pole blank design is
100A top tap off allows for board easy to fit to both three phase
extensions or MCB up to 100A boards and on a full DIN rail (single
with connection kit. phase and DIN rail
extension boxes).
2 6
Clear shrouded neutral bar to
Metering is integral with the main
IP2X allows the contractor to
board - no need for an additional
install cables without removing
extension box saving time and
the shroud. Ensures safe and easy
money.
installation.
3
Unique trunking entry obround Strong board aesthetics ideal for
system top and bottom enables commercial offices, health care
quick fitting to trunking and and education projects where
without the extra cost in time and boards may be situated in public
materials. areas.
Clear labelling
4
L1, L2, L3 on moulding are visible Choice
with and without the front cover Two choices of boards -
fitted, which show through the 125A and 250A.
cover for ease of line identification.
Invicta 3 Type B Distribution Boards
125A Incoming 63A Outgoing
Invicta 3 125A TP&N Enclosures are available with A hager incoming kit must be
Distribution Boards plain or glazed doors. used.
Surface mounted steel
enclosures. Fully shrouded copper busbar, Complies with BS EN 60439-3.
rated 25kA short circuit
Enclosure degree of protection: conditional current. For dimensions see page 3.25.
IP3X
Supplied without incoming and
outgoing devices.
JK106BG
125A Incomer Kits (note: these incomer kits will only fit the 125A board(s)
² A 300 / 450mm space is required below the board for fitting, see page 3.26 for dimensions.
These kits fit into the main distribution board. (When fitting a meter pack to a JK104B(G) & JK106B(G), a
JK101SE is required to provide additional incoming cable space).
For sub billing metering applications please contact our Technical Support Helpline 0870 607 6677.
Commercial
Distribution
Digital Multifunction Meter Pack ModBus JK140MJ
kWh Meter Pack Pulsed JK142BA
JK140MP
25A 32A 40A 50A 63A Current rating Cat ref. Current rating Cat ref.
NBN125A NBN132A NBN140A NBN150A NBN163A 6A ADB106 6A ADC106
NBN325A NBN332A NBN340A NBN350A NBN363A 10A ADB110 10A ADC110
NCN125A NCN132A NCN140A NCN150A NCN163A 16A ADB116 16A ADC116
NCN325A NCN332A NCN340A NCN350A NCN363A 20A ADB120 20A ADC120
NDN125A NDN132A NDN140A NDN150A NDN163A 25A ADB125 25A ADC125
NDN325A NDN332A NDN340A NDN350A NDN363A 32A ADB132 32A ADC132
40A ADB140 40A ADC140
45A ADB145 45A ADC145
50A ADB150 50A ADC150
Customer Services Hotline • 01952 675612 Technical Support Helpline • 01952 675689 3.13
Invicta 3 Type B Distribution Boards
125A Dual Metered Boards & Data Logger
The lighting and power meter The metered boards are The board is provided with the
board is a compact solution to supplied with meters that offer a 125A incomer pre-fitted helping
meet the demands of energy pulsed output. For modbus to save on installation time.
metering within non-dwelling output please contact our
buildings. Technical Support Helpline For metered board dimensions
01952 675689. see page 3.29.
JKD1812B
Data Logger
Description Cat ref.
ULog allows collection of data from up to 8 pulsed output meters JK107DL
allowing data to be analysed by a remote PC (.csv file output into
spreadsheets / database).
JK107DL
Commercial
Distribution
Dual 125A Meter Incomer Kits (note: these dual meter incomer kits will only fit the 125A board(s)
Customer Services Hotline • 01952 675612 Technical Support Helpline • 01952 675689 3.15
Invicta 3 Type B Distribution Boards
250A Incoming 63A Outgoing
Invicta 3 250A TP&N Fully shrouded copper busbar, Complies with BS EN 60439-3.
Distribution Boards rated 25kA short circuit
Surface mounted steel conditional current. For dimensions see page 3.25.
enclosures.
Supplied without incoming and
Enclosure degree of protection: outgoing devices.
IP3X
A hager incoming kit must be
Enclosures are available with used.
plain or glazed doors.
JK206BG
250A Incomer Kits (note: these incomer kits will only fit the 250A board(s)
¹ A 450mm space is required below the board for fitting, see page 3.26 for dimensions
Commercial
Distribution
Dual Meter 250A Incomer Kits (note: these dual meter incomer kits will only fit the 250A board(s)
2 of each of the following: Meter, 3 Pole CT Block, 3 x Fuses & Carriers on DIN rail, Wiring Loom, Incoming
Shroud, Instructions (including torque settings for electrical connections), Off Set Incoming Links, Neutral
Connection Block and Extension Box with Glazed Doors.
25A 32A 40A 50A 63A Current rating Cat ref. Current rating Cat ref.
NBN125A NBN132A NBN140A NBN150A NBN163A 6A ADB106 6A ADC106
NBN325A NBN332A NBN340A NBN350A NBN363A 10A ADB110 10A ADC110
NCN125A NCN132A NCN140A NCN150A NCN163A 16A ADB116 16A ADC116
NCN325A NCN332A NCN340A NCN350A NCN363A 20A ADB120 20A ADC120
NDN125A NDN132A NDN140A NDN150A NDN163A 25A ADB125 25A ADC125
NDN325A NDN332A NDN340A NDN350A NDN363A 32A ADB132 32A ADC132
40A ADB140 40A ADC140
45A ADB145 45A ADC145
50A ADB150 50A ADC150
Customer Services Hotline • 01952 675612 Technical Support Helpline • 01952 675689 3.17
Invicta 3 Type B Distribution Boards 125A & 250A
DIN Extension Boxes
Extension boxes have plain or Complies with BS EN 62208. Full width enclosure provided
glazed doors and DIN rail with 16 modular ways per row.
chassis.
For dimensions see page 3.26.
JK116EG
JK216E
Three Phase kWh Meters - Direct 63A Three Phase kWh Meters - Direct 100A
Voltage 230/400V~ 50/60Hz, Starting current = 40mA, Voltage 230/400V~ 50/60Hz, Starting current = 80mA,
Base current = 10A, Max current = 63A Base current = 20A, Max current = 100A
Commercial
Distribution
Cable Spreader Boxes for 125A & 250A Primary Boards
JK101SE
JK101DK
Cat ref. Type Coil AC Voltage Power circuit AC1 Cat ref. Description
ESC225S 25A 2NO 230V 50Hz 25A - 400V~ EG010 1 Channel Time Switch (Daily Cycle)
ESC240S 40A 2NO 230V 50Hz 40A - 400V~ EG071 1 Channel TIme Switch (Weekly Cycle)
ESC263S 63A 2NO 230V 50Hz 63A - 400V~ EG103 1 Channel Time Switch (Weekly Cycle - Basic Version)
ESC325S 25A 3NO 230V 50Hz 25A - 400V~ EG203 2 Channel Time Switch (Weekly Cycle - Basic Version)
ESC340S 40A 3NO 230V 50Hz 40A - 400V~ EG103E 1 Channel Time Switch (Weekly Cycle - Evolution Version)
ESC428S 25A 3NO + 1NC 230V 50Hz 25A - 400V~ EG203E 2 Channel Time Switch (Weekly Cycle - Evolution Version)
ESC425S 25A 4NO 230V 50Hz 25A - 400V~ EG493E 4 Channel Time Switch (Weekly / Annual Cycle)
ESC440S 40A 4NO 230V 50Hz 40A - 400V~ EE180 1 Channel Astronomical Time Switch
ESC463S 63A 4NO 230V 50Hz 63A - 400V~ EE181 2 Channel Astronomical Time Swtich
ESC426S 25A 4NC 230V 50Hz 25A - 400V~
Customer Services Hotline • 01952 675612 Technical Support Helpline • 01952 675689 3.19
Invicta 3 Type B Distribution Boards 125A & 250A
Side DIN Boxes
Side extension boxes provide They can be horizontally or For dimensions see page 3.25.
a new concept for distribution vertically attached to distribution
boards to allow DIN rail mounted boards using 1 x JK100HK.
devices to be fitted on site.
* All Side DIN Boxes supplied
with 2x removable gland plates.
JK104BDFG
JK208BDFG
Three Phase kWh Meters - Direct 63A Three Phase kWh Meters - Direct 100A
Voltage 230/400V~ 50/60Hz, Starting current = 40mA, Voltage 230/400V~ 50/60Hz, Starting current = 80mA,
Base current = 10A, Max current = 63A Base current = 20A, Max current = 100A
Commercial
Distribution
Description Cat ref.
Plain door
4 Way Side Extension Box for JK104B Full Width JK104BSF
6 Way Side Extension Box for JK106B Full Width JK106BSF
8 Way Side Extension Box for JK108B Full Width JK108BSF
12 Way Side Extension Box for JK112B Full Width JK112BSF
JK104BSF 16 Way Side Extension Box for JK1116B Full Width JK116BSF
Cat ref. Type Coil AC Voltage Power circuit AC1 Cat ref. Description
ESC225S 25A 2NO 230V 50Hz 25A - 400V~ EG010 1 Channel Time Switch (Daily Cycle)
ESC240S 40A 2NO 230V 50Hz 40A - 400V~ EG071 1 Channel TIme Switch (Weekly Cycle)
ESC263S 63A 2NO 230V 50Hz 63A - 400V~ EG103 1 Channel Time Switch (Weekly Cycle - Basic Version)
ESC325S 25A 3NO 230V 50Hz 25A - 400V~ EG203 2 Channel Time Switch (Weekly Cycle - Basic Version)
ESC340S 40A 3NO 230V 50Hz 40A - 400V~ EG103E 1 Channel Time Switch (Weekly Cycle - Evolution Version)
ESC428S 25A 3NO + 1NC 230V 50Hz 25A - 400V~ EG203E 2 Channel Time Switch (Weekly Cycle - Evolution Version)
ESC425S 25A 4NO 230V 50Hz 25A - 400V~ EG493E 4 Channel Time Switch (Weekly / Annual Cycle)
ESC440S 40A 4NO 230V 50Hz 40A - 400V~ EE180 1 Channel Astronomical Time Switch
ESC463S 63A 4NO 230V 50Hz 63A - 400V~ EE181 2 Channel Astronomical Time Swtich
ESC426S 25A 4NC 230V 50Hz 25A - 400V~
Customer Services Hotline • 01952 675612 Technical Support Helpline • 01952 675689 3.21
Invicta 3 Type B Distribution Boards 125A & 250A
Accessories & Spares
Invicta 3 125A & 250A Accessories
JK222PK
Each trunking kit contains a trunking channel, lid, lid joining brackets, connecting brackets and end caps.
JK06TK
Commercial
Distribution
Rated at 125A max
JK106BD
JK106BF
Customer Services Hotline • 01952 675612 Technical Support Helpline • 01952 675689 3.23
Invicta 3 125A / 250A Type B
TP&N Dsitribution Boards
L1
JK106B/BG 550 465 132.5 365 100 350
L2
L2
JK112B/BG 850 465 132.5 365 100 650
L3
JK116B/BG 950 465 132.5 365 100 750
Height
C
JK118B/BG 1100 465 132.5 365 100 900
L1 L2 L3
Commercial
Distribution
JK124B/BG 1250 465 132.5 365 100 1050
Width
Contactor Incomers
Dimensions (mm)
Height Width Depth
JK10634C 300 465 165.5
JK11004C 450 465 234.5
JK21604C 450 465 234.5
C
250A Side DIN Boxes
Width
Customer Services Hotline • 01952 675612 Technical Support Helpline • 01952 675689 3.25
Invicta 3 Dimensions
DIN Extension & Cable Spreader Boxes
125A DIN Extension Boxes
A
Width
Commercial
Distribution
Height
C
250A Side Extension Boxes
Customer Services Hotline • 01952 675612 Technical Support Helpline • 01952 675689 3.27
Invicta 3 Dimensions
Dual Meter Incomer Kits
B
Height
L1 L2 L3 N
Depth
Width
ISOLATE SUPPLY
BEFORE REMOVING COVER
L3
L1
Commercial
Distribution
L2
L3
L1
L2
L3
L1
L2
L3
L1
L2
L3
L1
L2
L3
L1
L2
L3
L1 L2 L3
Height
UN UN
LOCK LOCK
ISOLATE SUPPLY
BEFORE REMOVING COVER
L1
L2
L3
L1
L2
L3
L1 L2 L3
L1 L2 L3
Depth
Width
Customer Services Hotline • 01952 675612 Technical Support Helpline • 01952 675689 3.29
Invicta 3 Panelboards
Helping you to meet Part L2 of the
Building Regulations
The last few years have seen a major change in the design and installation of commercial electrical
distribution systems. The panelboard is at the heart of such a system, whether acting as the main
incoming board or as part of the sub distribution. Modern electrical distribution systems have more
RCD protection, more metering and more control devices. Panelboards have to offer a flexible solution
to help meet these needs.
The new Invicta 3 panelboard range includes 250A, 400A, 630A & 800A panelboards with new MCCB
incomers. Prewired meter packs allow installers to fit metering into the board for both the incoming and
outgoing ways. All the internal wiring is included. Installation is fast and simple, thanks to a number
of features. There is generous space where it is needed for cable bending radii at the top, bottom and
sides of the board and twin and earth neutral bars allow easy identification of earth and neutral
conductors with the corresponding phase conductors.
Commercial
Distribution
250A Incoming 125A Outgoing
Panelboards 3.36
1 2 3
Glazed door Key hole fixing point Pre-wired meter packs
The glazed door allows devices The key hole fixing points aid Installer only has to fit the packs
to be viewed without opening the installer when fitting the into the board. All internal wiring
the door. board to the wall, the central 5th is included.
keyhole makes levelling easier.
Customer Services Hotline • 0870 240 2400 Technical Support Helpline • 0870 607 6677 3.33
Invicta 3 Panelboards
Meeting the needs for distribution
Take a look below to see all the new features we have designed in and how this is going to make
installing a panelboard so much easier.
3
5
2
4
1
• The earth and neutral bars are positioned and deisgned for • Removable gland plates.
simpler installation.
• The metering kits fit directly into the main board saving space
and saving you the expense of buying an extension box.
1 5
bars To lighten the product when fixing
Allows easy identification of earth to the wall, pan assemblies can
& neutral conductors with also be purchased as a separate
corresponding line conductors. part for fitting into cubicle
switchboards.
2 6
Sufficient space for cable bending The Invicta 3 panelboards have
radii at the top, bottom and sides. been designed to suite perfectly
with the Invicta 3 Type B
distribution boards.
3 7
The top and bottom removable The glazed door allows devices
gland plates allows the installer to to be viewed without opening the
prepare cable entries away from door.
the board preventing ingress of
swarf etc.
4 8
Installer only has to fit the packs Key lock, cable extension boxes,
into the board. All internal wiring is meter packs, DIN rail boxes.
included. Invicta 3 panel boards are
adaptable for contractor on site
build and tailored solutions.
Invicta 3 Panelboard System (250A Rated)
250A Incoming 125A Outgoing
Options Internal separation Form 3A. Outgoers Outgoing MCCBs
Key lock, meter pack, DIN rail, 4, 6, 8, 12, 16 Triple Pole 1 & 3 pole MCCB 70mm2 flexible. Single pole 16-125A
extension box, spreader box. outgoing ways. 1 & 3 pole MCCB 95mm2 solid. (10 ratings)
Fixed thermal, fixed magnetic
Construction Cable Capacity Incomers Busbar Ratings trips.
Enclosures manufactured from 3 and 4 pole MCCB. Busbar rated current 250A Triple pole 25-125A (6 ratings),
1.2mm DC01M cold reduced Cable capacity 185mm2 continuous. adjustable thermal fixed
mild steel, phosphate pretreated max lug width 25mm. Busbar rated short-time magnetic trips.
and powder coated to 00A01 3 and 4 pole non auto MCCB. withstand current 25kA for 1s
BS4800. Cable capacity 185mm2 direct connected (unconditional). Form 3B is achieved using the
max lug width 25mm optional terminal shield (see
Specification Direct connection kit. MCCB accessories on page
Complies with BS EN 61439-2. M8 hexagonal bolt. 4.38).
Enclosure degree of protection: (Larger cables can be connected
IP3X by using extended connections, For accessories see page 3.37.
see page 4.38 MCCB section). For dimensions see page 3.47.
Incomer Kits
For RCD incomer option & tailored solutions contact our Technical Support Helpline on 0870 607 6677
See page XX for auxiliaries
Outgoing Devices
Commercial
Supplied with DIN Rail
Distribution
Description Cat ref. Cat ref.
Plain door Glazed door
1 Row 26 Mod (300mm Height) JN201BE JN201BEG
2 Row 52 Mod (450mm Height) JN203BE JN203BEG
JN201BE
JN205BE
Comprises of a digital multi function meter, 3 x control circuit fuse carriers, wiring harness and CTs. The
meter pack fits directly into the main panelboard.
When ordering these meter packs please contact technical support (01952 675689).
JN201BA
Accessories
JN001BP
Customer Services Hotline • 01952 675612 Technical Support Helpline • 01952 675689 3.37
Invicta 3 Panelboard System (400A Rated)
400A Incoming 125A Outgoing
Options Specification Cable capacity 240mm2. Busbar rated short-time
Key lock, meter pack, DIN rail, Complies with BS EN 61439-2. Max lug width 35mm on withstand current 35kA for 1s
extension box, spreader box. Enclosure degree of protection: extended connections fitted to direct connected (unconditional)
IP3X incomer.
Construction Internal separation Direct connection kit. Outgoing MCCBs
Enclosures manufactured from Form 3A M10 hexagonal bolt Single pole 16-125A
1.5mm DC01M cold reduced 6, 8, 12, 16, 18 Triple Pole (10 ratings).
mild steel, phosphate pretreated outgoing ways. Cable Capacity Outgoers Fixed thermal, fixed magnetic
and powder coated to 00A01 1 & 3 pole MCCB 70mm2 flexible. trips.
BS4800. Cable Capacity Incomers 1 & 3 pole MCCB 95mm2 solid. Triple pole 20-125A (6 ratings)
3 and 4 pole MCCB. adjustable thermal fixed
Cable capacity 240mm2 Busbar Ratings magnetic trips.
max lug width 35mm. Busbar rated current:
3 and 4 pole non auto MCCB. 400A continuous For dimensions see page 3.48.
Incomer Kits
For RCD incomer option contact our technical support helpline on 0870 607 6677
Outgoing Devices
Commercial
Distribution
Supplied with DIN Rail.
JF805E
These meter packs fit directly into the main panelboard. Suitable for single incoming cable.
When ordering these meter packs please contact technical support (01952 675689).
JF403BA
Accessories
Customer Services Hotline • 01952 675612 Technical Support Helpline • 01952 675689 3.39
Invicta 3 Panelboard System (630A / 800A Rated)
630A / 800A Incoming 125 / 250A Outgoing
Construction The removal of the gland plates Incomers Outgoing MCCBs
Enclosure manufactured from and cable spreader also allows Switch Disconnector 630A/800A. Single pole up to 125A - 70mm2
1.5mm DC01M cold reduced the mounting of DIN rail MCCB 400A/630A. flexible.
mild steel, phosphate pretreated extension boxes and meter Direct connection 800A. Single pole up to 125A - 95mm2
and powder coated to 00A01 packs. M12 hexagonal bolt. solid.
BS4800. Triple pole up to 250A -120mm2
Specification Busbar Ratings flexible.
Removable gland plates are Complies with BS EN 60439-1. Busbar rated current: 800A
provided top and bottom for Enclosure degree of protection: Busbar rated short time Incomers Cable capacity
ease of installation. IP3X withstand current 35kA for 400A – 2 x 240mm2
Internal separation. 1x direct connection 630A – 2 x 240mm2
Form 3A. (unconditional).
8, 12, 18 TP outgoing ways. For dimensions see page 3.48.
JF608B
Incomer Kits
Commercial
Distribution
JF80404B Pan Assembly JF80404BPA
JF80612B Pan Assembly JF80612BPA
Customer Services Hotline • 01952 675612 Technical Support Helpline • 01952 675689 3.41
Invicta 3 Panelboard System (630A / 800A Rated)
DIN Extension Boxes, Cable Spreader Boxes
DIN Extensions Boxes have plain Cable spreader boxes are used For dimensions see page 3.48.
or glazed doors and DIN rail for additional cabling space
chassis. therefore do not require doors. If For a h3 MCCBs see page 4.34
doors are desired optional door onwards.
kits are available.
JF801E
JF805E
JF803BA
Commercial
Distribution
Invicta 3 Panelboards (800A Incoming 125A Outgoing)
Incomer Kits
Outgoing Devices
MCCBs - 125A 18kA Single Pole
MCCBs x250 40kA - Triple Pole
Rating. Cat ref. Rating. 18kA Fixed Thermal 25kA Fixed Thermal
100A HNB100H 16A HDA014Z HHA014Z
125A HNB125H 20A HDA018Z HHA018Z
160A HNB160H 25A HDA023Z HHA023Z
200A HNB200H 32A HDA030Z HHA030Z
250A HNB250H 40A HDA038Z HHA038Z
50A HDA048Z HHA048Z
63A HDA061Z HHA061Z
80A HDA078Z HHA078Z
100A HDA098Z HHA098Z
125A HDA123Z HHA123Z
Customer Services Hotline • 01952 675612 Technical Support Helpline • 01952 675689 3.43
Invicta 3 Panelboard System (630A / 800A Rated)
Accessories
Accessories
JN001BP
Customer Services Hotline • 01952 675612 Technical Support Helpline • 01952 675689 3.45
Invicta 3 Panelboard System
Dimensions (mm)
ISOLATE BEFORE
Height Width Depth
JN204B/G 950 700 160
REMOVING COVER
L1
L2
JN206B/G 1100 700 160
L3
L1
JN208B/G 1100 700 160
L2
L3
JN212B/G 1250 700 160
JN216B/G 1550 700 160
Commercial
Distribution
ISOLATE BEFORE
Height
REMOVING COVER
2
1 7
7
8
Terminals
3 9
2 8
4 10
3 9
5 11
4 10
6 12
5 11
6 12
B1
Neutral Earth Bond
2 x 6 x 50mm 2 x 6 x 50mm 1 x 3 x 50mm
B2
L1 L2 L3
B3
Depth
Cables outgoing ways:
25 - 50mm2 CSA Flex
25 - 70mm2 CSA Solid
Extension Boxes
Dimensions (mm)
Height Width Depth
JN201BE/G 300 700 160
JN203BE/G 450 700 160
JN205BE 300 700 125
Height
Depth
Width
Customer Services Hotline • 01952 675612 Technical Support Helpline • 01952 675689 3.47
Invicta 3 Panelboard System (400A, 630A & 800A Rated)
Dimensions
Primary Boards
Dimensions (mm)
Height Width Depth
ISOLATE BEFORE
REMOVING COVER
JF406B/G 1250 900 220
L1 JF408B/G 1250 900 220
L2
L3
L1
JF412B/G 1400 900 220
L2
L2
L3
JF418B/G 1700 900 220
JF808B/G 1250 900 220
Height
ISOLATE BEFORE
REMOVING COVER JF812B/G 1400 900 220
JF818B/G 1700 900 220
1
2
10
11
JF60204B/G 1250 900 220
1 10
9 18
B1
B2
B3
JF80210B/G 1400 900 220
JF80408B/G 1400 900 220
L1 L2 L3 JF80414B/G 1700 900 220
JF80612B/G 1700 900 220
Terminals
Depth
Extension Boxes
Dimensions (mm)
Height Width Depth
JF801E/G 300 900 220
Depth JF803E/G 450 900 220
JF805E 300 900 158
JF806E 450 900 158
Width
Dimensions (mm)
Height Width Depth
ISOLATE BEFORE
REMOVING COVER
JHF812B/G 2050 900 220
L1 JHF818B/G 2200 900 220
L2
L3
L1
JHF80206B/G 1900 900 220
L2
L2
L3
JHF80210B/G 2050 900 220
JHF80408B/G 2050 900 220
Commercial
Distribution
Height
ISOLATE BEFORE
REMOVING COVER JHF80414B/G 2200 900 220
JHF80612B/G 2200 900 220
1 10
2 11
1 10
3 12
2 11
4 13
3 12
5 14
4 13
6 15
5 14
7 16
6 15
8 17
7 16
9 18
8 17
9 18
B1
B2
B3
L1 L2 L3
Depth
Width
Customer Services Hotline • 01952 675612 Technical Support Helpline • 01952 675689 3.49
Fuse Combination Switches 20 - 800A
SPSN, TP&N, TPSN
Description All versions will accept standard Note: Maximum rated
The Hager range of fuse BS88 fuse links and can be fuse links are fitted in
combination switches has been converted to switch all fuse combination
designed to complement both disconnector by fitting copper switches.
the TP&N and panelboard ranges links.
by providing individual protection Cable Capacity
and control of Utilisation category 20A = 16mm2
individual circuits. AC22B - 630 - 800A 32A = 16mm2
AC23 - 20 - 400A 63A = 25mm2
The enclosures up to 100A have 100A = 95mm2
been designed to provide Product features 125A = 95mm2
adequate cabling space without Complies with: 160A = 95mm2
the need for additional cable BS EN 60947-3 200A = 240mm2
spreader boxes. IP31. 250A = 240mm2
315A = 240mm2
Operation of the device is through Range: SPSN 20-100A (4 400A = 240mm2
a door mounted rotary handle ratings) TPN 20-630A 630A = 2 x 300mm2
which is mechanically interlocked (12 ratings) TPSN 20- 800A = 2 x 300mm2
to prevent access to live conduc- 630A (12 ratings)
tors when the switch is in the For dimensions see page 3.51.
on position. The handle is also
padlockable in the off position. For technical information see
page 3.52.
JFD206
Commercial
Distribution
250A Fuse Combination Switch TP&SN JFG425U JZA701
315A Fuse Combination Switch TP&SN JFH431U JZA702
400A Fuse Combination Switch TP&SN JFH440U JZA702
630A Fuse Combination Switch TP&SN JFI463U JZA703
800A Fuse Combination Switch TP&SN JFI480U JZA703
JFG416U
Copper Links
Customer Services Hotline • 01952 675612 Technical Support Helpline • 01952 675689 3.51
Switch Disconnectors 20-800A
TP&N, TP&SN
Description Operation of the device is Cable Capacity
The hager range of switch through a door mounted rotary 20A = 16mm2
disconnector has been designed handle which is mechanically 32A = 16mm2
to complement the FCS, TPN interlocked to prevent access to 63A = 50mm2
and panelboard ranges by live conductors when the switch 100A = 50mm2
providing individual protection is in the on position. The 125A = 50mm2
and control of individual circuits handle is also padlockable in the 160A = 95mm2
up to 800A. off position. 200A = 95mm2
250A = 150mm2
The enclosures have been Utilisation category 315A = 185mm2
designed to provide adequate AC-21 400A = 240mm2
cabling space without the need AC-22 630A = 2 x 300mm2
for additional cable spreader 800A = 2 x 300mm2
boxes. Product features
Complies with: For technical information see
BS EN 60947-3 page 3.53.
IP31.
Commercial
Distribution
IP65 Switch Disconnectors Triple Pole and Neutral
JG01S
Customer Services Hotline • 01952 675612 Technical Support Helpline • 01952 675689 3.53
Enclosed MCCBs & Switch Fuses
The Hager range of enclosed 4 Pole versions are available and Non-Auto MCCB RCCB add-on adjustable from
MCCBs has been designed for 4 pole plus RCCB add-on are Triple pole 125A 0.03A, 0.1A, 0.3A, 1A, 3A, 10A
individual circuit protection and avialble. Four pole 125A
complements our Invicta 3 Time delay - Instananious, 60ms,
distribution system. Construction Specification 150ms, 300ms, 500ms, 1s
MCCB Complies with BS EN 61439-2
The devices are mounted in IP31 Single pole 63 - 125A (3 ratings) For Enclosed MCCB technical
enclosures, with cable knock Triple pole 63 - 125A (3 ratings) Cable Capacity details and dimensions see page
outs top and bottom. Four pole 63 - 125A (3 ratings) 63 - 125A 3.60.
Flexible: min 6mm², max 70mm²
Both single and triple pole MCCB-RCCB Rigid: min 6mm², max 95mm² For Switch Fuse dimensions see
devices are equipped with fully Four pole + RCCB 63A & 100A page 3.61.
rated neutral links. (2 ratings)
Switch Fuses
All dimensions are in mm and exclude the handle. All dimensions are in mm and exclude the handle.
Add 70mm to the depth to allow for the handle (110mm for 630 / Add 70mm to the depth to allow for the handle
800A)
Dimensions (mm)
Dimensions (mm) Description Width Height Depth
Description Width Height Depth JAB302 20A TPN 200 250 150
JFB202U 20A SPSN 200 250 150 JAB303 32A TPN 200 250 150
JFB203U 32A SPSN 200 250 150 JAB306 63A TPN 200 250 150
JFB302U 20A TPN 200 250 150 JAB310 100A TPN 200 250 150
Commercial
Distribution
JFB303U 32A TPN 200 250 150 JAC312 125A TPN 250 300 150
JFB402U 20A TPSN 200 250 150 JAC316 160A TPN 250 300 150
JFB403U 32A TPSN 200 250 150 JAE320 200A TPN 375 400 200
JFD206U 63A SPSN 300 325 150 JAE325 250A TPN 375 400 200
JFD306U 63A TPN 300 325 150 JAG331 315A TPN 375 500 200
JFD406U 63A TPSN 300 325 150 JAG340 400A TPN 375 500 200
JFE210U 100A SPSN 375 400 200 JAH363 630A TPN 500 650 300
JFE310U 100A TPN 375 400 200 JAH380 800A TPN 500 650 300
JFE410U 100A TPSN 375 400 200 JAB402 20A TPSN 200 250 150
JFG312U 125A TPN 375 500 200 JAB403 32A TPSN 200 250 150
JFG412U 125A TPSN 375 500 200 JAB406 63A TPSN 200 250 150
JFG316U 160A TPN 375 500 200 JAB410 100A TPSN 200 250 150
JFG416U 160A TPSN 375 500 200 JAC412 125A TPSN 250 300 150
JFG320U 200A TPN 375 500 200 JAC416 160A TPSN 250 300 150
JFG420U 200A TPSN 375 500 200 JAE420 200A TPSN 375 400 200
JFG325U 250A TPN 375 500 200 JAE425 250A TPSN 375 400 200
JFG425U 250A TPSN 375 500 200 JAG431 315A TPSN 375 500 200
JFH331U 315A TPN 500 650 300 JAG440 400A TPSN 375 500 200
JFH431U 315A TPSN 500 650 300 JAH463 630A TPSN 500 650 300
JFH340U 400A TPN 500 650 300 JAH480 800A TPSN 500 650 300
JFH440U 400A TPSN 500 650 300
JFI363U 630A TPN 600 800 350
JFI463U 630A TPSN 600 800 350
JFI380U 800A TPN 600 800 350
JFI480U 800A TPSN 600 800 350
Dimensions (mm)
Rating Width Height Depth
JZA701 125 / 250A 375 200 200
JZA702 315 / 400A 500 250 300
JZA703 630 / 800A 600 300 350
Customer Services Hotline • 01952 675612 Technical Support Helpline • 01952 675689 3.55
Fuse Combination Switches
Thermal current lth (40ºC) 20A 32A 63A 100A 125A 160A 200A
Fuse size: BS A1 A1 A2-A3 A4 B1-B2 B1-B2 B1-B2 B1-B3
Rated insulated voltage
Ui (V) 800 800 800 800 800 800 800
Impulse voltages Uimp 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 12000 12000 -
Operational current Ie (A) A B A B A B A B A B A B A B
415V ac AC-22A/AC-23B 20 20 32 32 63 63 100 100 125 125 160 160 200 200
Motor power (kW) 400V ac 9 15 30 51 63 80 100
Reactive power 400V ac (kVAR) 15 45 25 45 55 60 75
Overload capacity
Short-circuit with fuses (kA Rms) 50 50 50 50 50 50 50
Fuse rating (A) BS88 20 32 63 100 125 160 200
Making & Breaking Capacity
Breaking capacity 400V AC-23B
160 256 500 800 1000 1280 1600
(A Rms)
Making capacity 400V AC-23B
200 320 630 1000 1250 1600 2000
(A Rms)
Withstand mechanical
20,000 20,000 10,000 10,000 10,000 10,000 10,000
(number of operations)
Withstand electrical
- - - - - - **
(number of operations)
Tightening torque 2 2 6 9 9 9 20
Connection (mm2)
Minimum Cu cable section 2.5 2.5 10 25 35 50 70
Maximum Cu cable section 16 16 25 95 95 95 240
Fuse types NIT20 NIT32 TIS63 TCP100 TF125 TF160 TF200
Commercial
Icw rated short time withstand
Distribution
1.26 1.26 1.5 1.5 7 7 7 9
value (kA/s)
R.M.S value (kA) 0.16 0.256 0.504 0.64 1 1.28 1.28 2
Peak withstand value (kA) - - - - 20 20 18 30
Rated short circuit making
1.8 1.8 2.1 2.1 11.9 11.9 11.9 15.3
capacity (kA)
Rated impulse withstand voltage
8 8 8 8 8 8 8 8
Uimp (kV)
Mechanical endurance
100,000 100,000 100,000 100,000 10,000 10,000 10,000 10,000
(number of operations)
Maximum cable size 16 16 50 50 50 95 95 150
Tightening torque (Nm) 2 2 4 4 9 9 9 20
Table 9
Customer Services Hotline • 01952 675612 Technical Support Helpline • 01952 675689 3.57
IP65 Enclosed Isolating Switch
IP65 Enclosed Isolating Switch
Dimensions (mm)
Description Width Height Depth
JG00S 10A TPN 100 136 74
JG01S 16A TPN 100 136 105
JG02S 25A TPN 100 136 105
JG03S 40A TPN 136 201 105
JG04S 63A TPN 136 201 118
JG05S 80A TPN 136 201 118
Commercial
Distribution
Fuse Switch A switch in which one or more poles 23 Switching of highly inductive loads.
have a fuse carrier/link which forms the 3. The suffix A or B, which indicates whether the unit is suitable
moving contact. for frequent or infrequent operation.
A Frequent operation
B infrequent operation.
The definitions of these two basic types of fuse combination units
have now been extended to include units suitable for making, For example a fuse-combination unit feeding a 400V AC circuit of
breaking and isolation and units which are only suitable for providing mixed resistive and inductive loads which would need to be operated
isolation for maintenance work. frequently would require a minimum utilisation category of AC-22A.
If the load was highly inductive, i.e. motor loads, then the minimum
Definition Symbol Function
utilisation category would be AC-23A.
Switch Fuse Making and
breaking current Generally, category AC-23 does not cover the switching of
capacitors. Usually this is the subject of agreement between
manufacturer and user.
Disconnector Fuse Isolating
Motor Power Circuit Protection
Fuse-combination units can be used very effectively for motor power
Switch Disconnector Making, breaking circuit protection, the energy limiting HRC fuse offering very good
Fuse and isolating protection to its associated starter. Category AC-23A should be
specified for this duty. Special motor circuit protection fuse links are
available which eliminate the need to fit a larger bodied fuse just to
Fuse Switch Making and
take care of the starting current of the motor.
breaking current
The protection of motor power circuits should not be confused with
Fuse Disconnector Isolating the direct switching of a single motor. If a fuse-combination unit is
required to perform this function then it must comply with the
requirements of Appendix A of BS EN 60947-3 which makes
Fuse Switch Making, breaking provision for different utilisation categories for this application.
Disconnector and isolating
Customer Services Hotline • 01952 675612 Technical Support Helpline • 01952 675689 3.59
Enclosed MCCBs
Characteristics
Series JG**
MCCB 63A to 125A MCCB
MCCB + RCCB Add on block 63A & 100A
Voltage rating in AC 240 / 415 V
IP Protection IP3X
Enclosure body type Steel
Powder coat Grey white RAL
Enclosure paint type
9002
Cable entry VIA End PLATES/ Kos
Terminal Connection capacity
maximum terminal capacity 95mm²
Enclosure earth stud M8
Installation
Mounting Wall
Dimensions (mm)
Width Height Depth Connection Knockouts
Height
Commercial
Distribution
Customer Services Hotline • 01952 675612 Technical Support Helpline • 01952 675689 3.61