Vishay Semiconductors
TYPICAL APPLICATIONS
Rectifying bridge for large motor drives
600 A
PRODUCT SUMMARY
IF(AV) Type Modules - Diode, High Voltage
I2t
For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
www.vishay.com 1
VSKD600 Series
Vishay Semiconductors
Standard Diodes, 600 A (SUPER MAGN-A-PAK Power Modules)
FORWARD CONDUCTION
PARAMETER Maximum average forward current at case temperature Maximum RMS forward current SYMBOL IF(AV) IF(RMS) TEST CONDITIONS 180 conduction, half sine wave 180 conduction, half sine wave at TC = 100 C t = 10 ms Maximum peak, one-cycle forward, non-repetitive surge current IFSM t = 8.3 ms t = 10 ms t = 8.3 ms t = 10 ms Maximum I2t for fusing I2t t = 8.3 ms t = 10 ms t = 8.3 ms Maximum I2t for fusing Low level value of threshold voltage High level value of threshold voltage Low level value of forward slope resistance High level value of forward slope resistance Maximum forward voltage drop I2t VF(TO)1 VF(TO)2 rf1 rf2 VFM No voltage reapplied 100 % VRRM reapplied No voltage reapplied 100 % VRRM reapplied VALUES 600 100 942 19.0 20.1 16.2 Sinusoidal half wave, initial TJ = TJ maximum 17.2 1805 1683 1319 1230 18 050 0.70 0.77 0.28 0.25 1.45 kA2s V m V kA2s kA UNITS A C A
t = 0.1 ms to 10 ms, no voltage reapplied (16.7 % x x IF(AV) < I < x IF(AV)), TJ = TJ maximum (I > x IF(AV)), TJ = TJ maximum (16.7 % x x IF(AV) < I < x IF(AV)), TJ = TJ maximum (I > x IF(AV)), TJ = TJ maximum Ipk = 1800 A, TJ = 25 C, tp = 10 ms sine pulse
BLOCKING
PARAMETER RMS insulation voltage Maximum peak reverse and off-state leakage current SYMBOL VINS IRRM t=1s TJ = TJ maximum, rated VRRM applied TEST CONDITIONS VALUES 3000 50 UNITS V mA
SUPER MAGN-A-PAK
www.vishay.com 2
For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
VSKD600 Series
Standard Diodes, 600 A Vishay Semiconductors (SUPER MAGN-A-PAK Power Modules)
RthJC CONDUCTION
CONDUCTION ANGLE 180 120 90 60 30 SINUSOIDAL CONDUCTION 0.009 0.011 0.014 0.021 0.037 RECTANGULAR CONDUCTION 0.006 0.011 0.015 0.022 0.038 TJ = TJ maximum K/W TEST CONDITIONS UNITS
Note The table above shows the increment of thermal resistance RthJC when devices operate at different conduction angles than DC
150 140 130 120 110 100 30 90 80 0 100 200 300 400 500 600 700 Average Forward Current (A) 60
Conduction Angle
700 600 500 400 300 200 100 0 0 100 200 300 400 500 600 Average Forward Current (A)
Conduction Angle
90 120 180
150 140 130 120 110 100 30 90 80 0 200 400 600 800 1000 Average Forward Current (A) 60 90 120 180 DC
Conduction Period
1000 900 800 700 600 500 400 300 200 100 0 0 200 400 600 800 1000 Average Forward Current (A) VSKD600.. Series Per Junction TJ = 150C RMS Limit
Conduction Period
DC 180 120 90 60 30
For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
www.vishay.com 3
VSKD600 Series
Vishay Semiconductors
Standard Diodes, 600 A (SUPER MAGN-A-PAK Power Modules)
Peak Half Sine Wave Forward Current (A ) 20000 18000 16000 14000 12000 10000 8000 6000 4000 0.01 VSKD600.. Series Per Junction 0.1 Pulse Train Duration (s) 1
18000
At Any Rated Load Condition And With Rated VRRM Applied Following Surge. 16000 Initial T J = 150C @ 60 Hz 0.0083 s 14000 @ 50 Hz 0.0100 s 12000 10000 8000 6000 4000 1 10 100
Number Of Equal Amplitude Half Cycle Current Pulses (N )
Maximum Non Repetitive Surge Curren t Versus Pulse Train Duration . Initial T = 150C J No Voltage Reapplied Rated VRRM Reapplied
1000
R th
0 0.
DC 800
600
180 (Sine)
K/ W 0. 12 K/ W 0.1 6K /W
0. 08
400 VSKD600.. Series Per Junction TJ = 150C 0 200 400 600 800
0 0. 6
SA
W K/
W K/
= 2 0.0 W K/ -D ta el R
200
0
1000 0
25
50
75
100
125
150
3000
R th
02 0.
K /W 4K /W 0.0 5K /W
0. 0
0. 03
SA
W K/
= /W 1K 0.0 -D ta el
600
1200 0
25
50
75
100
125
150
www.vishay.com 4
For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
VSKD600 Series
Standard Diodes, 600 A Vishay Semiconductors (SUPER MAGN-A-PAK Power Modules)
4500
R th
4000 3500 3000 2500 2000 1500 1000 500 0 0 300 600 900 1200 1500 1800 0 3 x VSKD600.. Series Three Phase Bridge Connected T J = 150C 120 (Rect)
0. 02
K/ W 0.0 3K /W
0.0 5 K/ W
SA
= 01 0. W K/ -D ta el R
0.08
K/ W
0.12 K /W 0.2 K/ W
25
50
75
100
125
150
0.01
Steady State Value: R thJC = 0.065 K/W (DC Operation) 0.001 0.001 0.01 0.1 1 10 100
For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
www.vishay.com 5
VSKD600 Series
Vishay Semiconductors
Standard Diodes, 600 A (SUPER MAGN-A-PAK Power Modules)
VSK
1 1 2 3 4 -
D
2
600
3
20
4
Module type Circuit configuration D = 2 diodes in series (see Circuit Configuration table) Current rating Voltage code x 100 = VRRM (see Voltage Ratings table)
CIRCUIT CONFIGURATION
CIRCUIT DESCRIPTION CIRCUIT CONFIGURATION CODE D
3
CIRCUIT DRAWING
www.vishay.com 6
For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
Outline Dimensions
Vishay Semiconductors
31.0 (1.22)
50.0 (1.97)
44.0 (1.73)
28.0 (1.10)
52 (2.05)
3 26.0 (0.98) 112.0 (4.41) 124.0 (4.88) 1.0 (0.039) 149.0 (5.67)
20.1 (0.78)
www.vishay.com 1
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishays knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customers responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customers technical experts. Product specifications do not expand or otherwise modify Vishays terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Revision: 12-Mar-12