536293
7 2
4 or 5 6 3
Relay description
8 1 2 3 4 7 6 9 5
535189
535192
523151
523152
10
1 Spring return pushbutton for testing the contacts (green: , red: ). 2 Mechanical relay status indicator. 3 Removable lock-down door enabling forced maintaining of the contacts for test or maintenance purposes. During operation, this lock-down door must always be in the closed position. 4 LED (depending on version) indicating the relay status. 5 Removable legend for relay identification. 6 Four notches for rail mounting adapter or panel mounting adapter with fixing lugs. 7 Eight, eleven or fourteen Faston type pins. 8 Area by which the product can be easily gripped. 9 Mounting adapter enabling direct mounting of the relay on a panel. 10 Mounting adapter enabling direct mounting of the relay on a rail.
6
535190
Socket description
1 Sockets with mixed contact terminals (1) 1 Connection by screw clamp terminals or connector. 2 Fourteen female contacts for the relay pins. 3 Location for protection modules. 4 Locking components for plastic and metal maintaining clamps. 5 Locating slot for mounting on rail with fixing clip. 6 Two or four fixing holes for panel mounting.
Outputs
2 4 3
Inputs
12
5 6
535191
Relay supply
1
Inputs
Outputs
2 4 3
Sockets with separate contact terminals (2) 1 Connection by connector. 2 Eight, eleven or fourteen female contacts for the relay pins. 3 Location for protection modules. 4 Locking components for plastic and metal maintaining clamps. rail with fixing clip. 5 Locating slot for mounting on 6 Two fixing holes for panel mounting. 7 Location for bus jumpers (see mounting on sockets on page 28202/8).
12
(1) The inputs are mixed with the relays supply terminals, with the outputs being located on the opposite side of the socket. (2) The inputs and outputs are separated from the relay supply terminals.
5 7
Relay supply
28202-EN_Ver2.1.fm/2
Characteristics
General characteristics
Conforming to standards Product certifications C Ambient air temperature around Storage the device Operation C Vibration resistance Conforming to IEC/EN 60068-2-6 Degree of protection Conforming to IEC/EN 60529 Shock resistance Opening conforming to IEC/EN 60068-2-27 Closing Protection category Mounting position IEC/EN 61810-1 (iss. 2), UL 508, CSA C22-2 n 14 UL, CSA - 40 + 85 - 40 + 55 > 6 gn (10...50 Hz) IP 40 10 gn 5 gn RT I Any
Insulation characteristics
Rated insulation voltage (Ui) Rated impulse withstand voltage (Uimp) Dielectric strength Between coil and contact (rms voltage) Between poles Between contacts V kV
250 (IEC), 300 (UL, CSA) 3.6 (1.2/50 s) 2500 2500 1500
Contact characteristics
Relay type Number and type of contacts Contact materials Conventional thermal For ambient current (Ith) temperature 55 C Rated operational current Conforming to IEC N/O in utilisation categories N/C AC-1 and DC-1 Conforming to UL Maximum operating rate No-load In operating cycles/hour Under load Switchable current Minimum Switching voltage Maximum Minimum Rated load (resistive) RXM 2AB111 2 C/O AgNi 12 12 6 12 18 000 1200 10 / 250 17 12 / 250 V 12 / 28 V 3000 336 170 20 % 10 0.1 See curves below RXM 3AB111 3 C/O 10 10 5 10 RXM 4AB111 4 C/O 6 6 3 8 RXM 4GB111 4 C/O AgAu 3 2 1 3
Switching capacity
Maximum Minimum
1 4
mA V V A A VA W mW
14
1 4
1V 4V
1V 4V
3 / 250 3 / 28 750 84 15
1V 4V
4
Current
1
10 6 3
107
106
0,4
A D C
100 150
105 0
D C
B
3 0,3 10,8 0,6 0,4 0,2 cos 0,1 0
28 50
A RXM 2AB111
B RXM 3AB111
C RXM 4AB111
D RXM 4GB111
28202-EN_Ver2.1.fm/3
Coil characteristics
Average consumption Drop-out voltage threshold Operating time (response time) Between coil energisation and making of the On-delay contact Between coil de-energisation and making of the Off-delay contact Control circuit voltage Uc Relay control voltage codes DC Average resistance at 20 C 10% Operating voltage limits Relay control voltage codes AC Average resistance at 20 C 15% Operating voltage limits
1 4 1 4 1 4 1 4
VA W
ms ms ms ms V
5 5
20 20 12 JD 160 9.6 13.2 24 BD 650 19.2 26.4 B7 180 19.2 26.4 48 ED 2600 38.4 52.8 E7 770 38.4 52.8 110 FD 11 000 88 121 120 F7 4430 96 132 125 GD 11 000 100 138 220 MD 14 000 176 242 230 P7 15 000 184 253 240 U7 15 500 192 264
Min. Max.
V V
Min. Max.
V V
Socket characteristics
Socket type Relay types used Product certifications Conventional thermal current (Ith) Degree of protection Conforming to IEC/EN 60529 Connection Solid cable 1 conductor without cable end 2 conductors Flexible cable with cable end 1 conductor 2 conductors Maximum tightening torque Contact terminal arrangement Bus jumper (Ith: 5 A) RXZ E2S108M RXM 211111 RXZ E2S111M RXZ E2S114M RXZ E2M114M RXZ E2M114 RXM 311111 RXM 411111 RXM 211111(1) RXM 211111(1) RXM 411111 RXM 411111
UL, CSA 12 10 IP 20 mm2 0,52,5 mm2 0,51,5 mm2 (AWG 20AWG 14) (AWG 20AWG 16) mm2 0,51,5 mm2 0,50,75 mm2 (AWG 20AWG 16) (AWG 20AWG 18) mm2 0,21,5 mm2 0,20,75 mm2 (AWG 24AWG 16) (AWG 24AWG 18) mm2 0,20,75 mm2 0,20,5 mm2 (AWG 24AWG 18) (AWG 24AWG 20) Nm 0.6 (M3 screw) Separate Mixed Yes No (1) When mounting relay RXM 211111 on socket RXZ E2M1111, the thermal current must not exceed 10 A. A Old ranges New range
Substitution table
RXN Miniature relays RXN 21E1111
RXN 41G1111 RXN 21E1111TQ RXN 41G1111TQ
RXL
RXL 2A12B111 RXL 3A10B111 RXL 4A06B111 RXL 4G06B111 RXL 2A12B111TQ RXL 4A06B111TQ RXZ E1M114 RXZ 7G RXZ E1M114M RXZ E11111M RXW 040MD RZM 040W RZM 03111 RZM 041117 RZM 02111
RXM
RXM 2AB111 RXM 3AB111 RXM 4AB111 RXM 4GB111 RXM 2AB111TQ RXM 4AB111TQ RXZ E2M114 RXZ E2M114M RXZ E2M114M RXZ E21111M RXM 040W RXM 040W RXM 040W (2) RXM 041117 RXM 021112(2) RXZ 400 RXZ R335 RXZ L420
Sockets
RXZ E1M114 RXZ 7G RXZ E1M114M RXZ E11111M
Protection modules
RXW 040MD RZM 040W RZM 03111 RZM 041117 RZM 02111
Accessories
RXZ 200 RXZ 200 RXZ R235 RXZ R235 RXZ L320 RXZ L320 (2) 1 Protection module without LED. Presentation: page 28202/2 2 8 2 0 2 -E N _ V e r2 .1 .fm /4 References: pages 28202/5 and 28202/6 Dimensions: pages 28202/7 and 28202/8 Schemes: page 28202/9
References
535189
Weight kg 0.036 0.036 0.036 0.036 0.036 0.036 0.036 0.036 0.036 0.036
RXM 1AB2F7
4 12 4224 4248 42110 42220 1224 1248 12120 12230 12240 4 12 4224 4248 42110 42125 1224 1248 12120 12230
535189
Miniature relays with low level contacts, without LED (sold in lots of 10)
Control circuit voltage Number and type of contacts Thermal current (Ith) 4 C/O - 3 A Unit Weight reference kg RXM 4GB1JD 0.036 RXM 4GB1BD 0.036 RXM 4GB1ED 0.036 RXM 4GB1FD 0.036 RXM 4GB1B7 RXM 4GB1E7 RXM 4GB1F7 RXM 4GB1P7 0.036 0.036 0.036 0.036
RXM 4GB2F7
4 12 4224 4248 42110 1224 1248 12120 12230 4 12 4224 4248 42110 1224 1248 12120 12230 12240
Miniature relays with low level contacts, with LED (sold in lots of 10)
RXM 4GB2JD RXM 4GB2BD RXM 4GB2ED RXM 4GB2FD RXM 4GB2B7 RXM 4GB2E7 RXM 4GB2F7 RXM 4GB2P7 RXM 4GB2U7
28202-EN_Ver2.1.fm/5
References (continued)
535235
Weight kg 0.036 0.036 0.036 0.036 0.036 0.036 0.036 0.036 0.036
4 12 4224 4248 42110 42220 1224 1248 12120 12230 4 24 1224 12230
535211
Sockets
Contact terminal arrangement Mixed Connection Screw clamp terminals Connector Separate Connector Relay type RXM 21111(3) RXM 41111 RXM 21111(3) RXM 41111 RXM 21111 RXM 31111 RXM 41111 Sold in lots of 10 10 10 10 10 Unit reference RXZ E2M114 (1) RXZ E2M114M (1) RXZ E2S108M (2) RXZ E2S111M (1) RXZ E2S114M (1) Weight kg 0.048 0.056 0.058 0.066 0.070
Protection modules
RXZ E2S114M + Relay RXM 4AB2F7 Description Voltage V Diode RC circuit
535212
For use with All sockets All sockets All sockets All sockets All sockets All sockets
Sold in lots of 20 20 20 20 20 20
Unit reference RXM 040W RXM 041BN7 RXM 041FU7 RXM 021RB RXM 021BN RXM 021FP
Varistor
RXM 041117
Timing relays
Description
535195
66666
Sold in lots of 10 10 10 10 10 10 10
Weight kg
Accessories
Description RE XL411 Metal maintaining clamp Plastic maintaining clamp Bus jumper, 2-pole (Ith: 5 A) Mounting adapter for 3 rails (5) Mounting adapter with fixing lugs for panel Clip-in legends For use with All sockets All sockets All sockets with separate contacts All relays All relays All relays (sheet of 108 legends) All sockets except RXZ E2M114 Unit reference RXZ 400 RXZ R335 RXZ S2 RXZ E2DA RXZ E2FA RXZ L520 RXZ L420 Weight kg 0.001 0.005 0.005 0.004 0.002 0.080 0.001
536484
RXZ 400
(1) Thermal current Ith: 10 A (2) Thermal current Ith: 12 A (3) When mounting relay RXM 211111 on socket RXZ E2M1111, the thermal current must not exceed 10 A. (4) Please consult the "Zelio Time timing relays" catalogue. (5) Test button becomes inaccessible.
28202-EN_Ver2.1.fm/6
Dimensions
Dimensions
Miniature relays RXM 111111
Common view RXM 2 Pin side view RXM 3 RXM 4
= 6,5 6 4 4
= = =
27
Sockets
RXZ E2M114 RXZ E2M114M
40 19 25,5
43 17
24 6 14 5 22 2 12 1 44 8 42 4 34 7 32 3 24 14 6 5
(4)
34 7 44 8 42 4 32 3
22 12 2 1
(1)
79 61
39,5
80
(1)
(3)
(2)
11 A2 14 41 12 31 11 A1 13 21 10 9
(3)
(2)
A2 14 41 12 31 11 21 10
A1 13 11 9
50
23,5 27
3,5
9 23 7 69 30
21 30
67
RXZ E2S108M
RXZ E2S111M
RXZ E2S114M
61 19
41 12 44 8 42 4 11 9 14 5 12 1 31 9 34 6 32 3 22 2 24 5 12 1 21 8 14 4 11 7 41 12 44 8 42 4 31 11 34 7 32 3 21 11 10 9 24 14 6 5 22 12 2 1
79
(1)
38
(3)
(2)
A2 14 A1 13
38
A2 14 13
A1
A2 14 13
A1
3,5
23 7 70
(5) 29
23,5 27
23,5 27
23,5 27
(1) Relays (2) Add-on protection module (3) Maintaining clamp (4) 2 elongated holes 3.5 x 6.5 (5) 2 bus jumpers
38
28202-EN_Ver2.1.fm/7
40
Dimensions (continued)
Dimensions (continued)
Plastic clamp and clip-in legends
RXZ R335 RXZ L420 Mounting on all sockets (1)
57 12
26,5 14,2
(1)
27
81
Bus jumper
RXZ S2 Mounting on sockets with separate contacts (view from below) Example of bus jumper mounting on sockets
Metal clamp
RXZ 400
25 7,3 22
2,2
22 2,3
(1)
(1)
42
(2)
(2)
0,8
(1) 2 bus jumpers (polarity A2) (2) 2 bus jumpers (polarity A1)
38
43
48
3,5 6 23 51 4 24 48 49
3
3,5
4 24
28202-EN_Ver2.1.fm/8
38
94,5
Schemes
Schemes
Miniature relays RXM 211111
A2 14 44 12 42
RXM 311111
A2 14 24 34 12 22 32
RXM 411111
14 24 34 12 22 32 42 44 A2 4 42 8 44 12 41 14 A2
A1
A1
11
11
21
11
21
41
31
31
1 12 5 14 9 11 13 A1
4 42 8 44 12 41 14 A2
1 12 4 14 7 11 13 A1
2 22 5 24 8 21
3 32 6 34 9 31 14 A2
1 12 5 14 9 11 13 A1
2 22 6 24 10 21
3 32 7 34 11 31
41
28202-EN_Ver2.1.fm/9
A1