Specialty Resins
Non - Reduced WPG Acid value Color volatile Viscosity Solvent Viscosity (lbs/gal) (on nv) Gardner / APHA
Setalux 10-1302 50% 100 - 300 cps Setalux 10-1310 50% 0.04 - 0.27 Pa.s.
Product Information
A. Microgels
MAK/ VM&P/ na 7.7 5 max na na n-BuAc aliphatic na 7.6 3 max na 350 hydrocarbon/ n-BuOH
OH functional acrylic microgel; low viscosity with excellent yellowing resistance and aluminum orientation; non-HAPs OH functional acrylic microgel; rheology control for base coat and single stage; EU number - Setalux 1850 SA-50; non-HAPs
Setal 10-1600 51% 0.6-1.2 / A-100/ xyl/ PGME na 8.3 9 max na 650 8-28 Pa.s. amine Setalux 10-1601 60% 1.5 - 3.0 / A-100/ n-BuAc na 8.1 4 max na 600 10-15 Pa.s. amine Setalux 10-1701 60% 3.5 - 10.0 Pa.s. A-100/ n-BuOH na 8.3 8 max na 500 amine Setalux 10-1803 64% 600 - 1500 n-butyl acetate na 8.7 Setal 10-1821 64% 0.45 - 0.75/ n-BuAc/ xyl na 8.8 3 - 8 Pa.s. 2 max na 300 amine 6 max na 300 amine
opaque SCA modified polyester; (4% SCA on solution), excellent sag resistance, flow and stabilization, good CAB compatibility, for bake CC, air dry or bake pigmented systems; EU number - Setal 90173 SS-50 opaque SCA modified thermoset acrylic; (3.7% SCA on solution); excellent sag resistance, flow and stabilization, for bake CC, air dry or bake pigmented systems; EU number - Setalux 91756 VS-60; low HAPs opaque SCA modified thermoset acrylic; (4% SCA on solution), for bake CC at lower temperature, air dry or bake pigmented systems; EU number - Setalux 71760 VB-60; low HAPs transparent SCA; to increase sag resistance of air dry or low-bake clearcoats and single-stage coatings transparent SCA modified polyester; (2.5% SCA on solution), good rheology control, ambient cure systems, low bake; EU number - Setal 82166 SS-64
C. NCO-free resins
Ketac primer
Setalux 10-1440 66% D - G active xyl/ n-BuOH/ na 8.0 MIBK 155 - 165 10 max amine 240 amine eq. wt. ketimine crosslinking resin; for use in 2.8 and 3.5 VOC Ketac primer systems, extremely fast dry, excellent adhesion and build acetotacetate functional acrylic resin; higher solids, for use with Setalux 10-1440 for 3.5 VOC Ketac primer system; non-HAPs
100 max 1200 acetotacetate functional acrylic resin; for very fast drying, fast sanding APHA ac. ac. eq. wt. primers; improved solvent holdout, salt-spray and humidity resistance 130 ac.ac. eq. wt. acetoacetate modified polyester; very high solids, low viscosity, diluent for use with Setalux 10-1440 in <2.8 VOC systems; non-HAPs acetoacetate modified polyester; for use with Setalux 10-1440 in 2.1 - 2.8 VOC primer systems that require excellent corrosion resistance, fast cure and adhesion amine functional acrylic; fast air dry, low VOC, excellent durability, DSL compliant; non-HAPs epoxy functional acrylic; high solids, DSL compliant; non-HAPs
Setal 26-3705 75% L - P xyl na 8.8 0.5 max 6 max 440 ac.ac. eq. wt.
Setalux 17-1453 55% S - U MAK na 8.0 14 - 18 5 max Setalux 27-1435 80% Z3 - Z5 MAK P - T @ 70% 8.6 1 max in MAK
05/08
Product Information
P - T @ 50% 8.6 10 max 3 max 430 in xyl G - J @ 50% in tol G - J @ 50% in n-BuAc R - V @ 60% in t-BuAc 8.6 9.0 9.0 10 max 10 max 12 max 3 max 3 max 3 max 200 max APHA 250 max APHA 430 430 430 430 430
Setal 11-1114 60% Z1 - Z3 xyl Setal 11-1115 70% X-Z n-BuAc/ MPK Setal 11-1135 60% Y - Z1 tol/ xyl
69%
Z1 - Z3
xyl
Setal 51-1320 55% Y - Z1 T-butyl B - FW @ 40% 8.6 14 max 7 max 375 acetate/A-100 tBac Gardner
Soya Oil
G - I @ 45% in xyl
8.2
10 - 18
5 max
800
Product Information
Tall Oil
H - K @ 40% in xyl U - X @ 40% in xyl O - T @ 45% in tol U+ to X @ 45% in xyl L - O @ 40% in xyl
na na na na na
air dry or force dry coatings Setal 11-1390 in A-100 low viscosity, fast curing conversion varnishes Setal 11-1399 in VM&P/ iBuOH/ tol/ xyl; low HAPs air dry and bake coatings fast curing conversion varnishes, air dry and bake coatings
H - K @ 40% 8.3 10 max 5 max na in xyl F - I @ 45% in xyl 8.3 10 max 8 max na
Soya Oil
Setal 11-1490 50% O - R xyl Setal 11-1492 50% U - W xyl Setal 51-1492 60% Z - Z2 t-BuAc/ A-100/ n-BuAc
positive through dry, durable, air-dry, bake positive through dry, durable, fast dry aerosol applications, higher aliphatic solvent tolerance Setal 11-1492 in t-BuAc blend; non-HAPs positive through dry, durable, good humidity and early water spot resistance, (Setal 21-1491 and 21-1498 are higher solids versions) for air or force dry coatings; low HAPs
B - E @ 40% 8.2 10 max 6 max na in xyl K - O @ 50% in t-BuAC 8.6 12 max 7 max na
Soya Oil
Setal 11-2407 60% Z3 - Z5 VM&P/ xyl Setal 11-2408 50% Z6- to Z7+ MS/ A-100/ xyl Setal 11-2457 50% Z1 - Z3 MS Setal 11-2458 50% Z5 - Z7 MS/ xyl Setal 11-2460 70% U - W A-100/ PMAc/ xyl
7.7
9 max
6 max
na
tough, flexible, excellent color and gloss; low HAPs very high viscosity, tough, excellent exterior durability and gloss retention; low HAPs good flow and leveling, exterior durability with flexibility, architectural metal applications; non-HAPs high drink, good flow and leveling, exterior durability with flexibility; low HAPs high solids flexibilizer for chain stopped alkyds, good flow and leveling, exterior durability with flexibility; low HAPs high drink, faster dry, good flow and leveling, exterior durability with flexibility
B - E @ 40% 7.6 12 max 4 max na in xyl H - K @ 40% 7.6 9 max 4 max 835 in ms T - V @ 40% 7.6 10 max 6 max na in ms A2 - A @ 50% 8.6 10 max 5 max na in PMAc N - Q @ 50% 7.5 10 max 6 max na in VM&P
Product Information
55%
Z2 - Z4
na
7.7
12 max
8 max
na
fast initial cure, good durability; EU number - Setal 177 WS-65; low HAPs excellent flow & leveling, exterior durability, gloss retention, toughness, meets TT-R-266 Type III in a slower solvent; non-HAPs plasticizer resin, tough, good adhesion
B - F@ 40% 7.6 10 max 6 max na in ms I- to K @ 55% in xyl 8.4 13 max 8 max 750
Castor Oil
Soya Oil
Setal 11-3461
70%
B - D
MS
7.8
14 max
8 max
na
good brushability, flow, body, flexible, color stability, and durable; non-HAPs meets performance / composition requirement TT-R-266, Type I, Class A; low HAPs good brushability, flow, body, color stability, and durable; EU number Setal 270 WS-70; low HAPs excellent penetration, very fast dry and excellent hardness development, exterior clears, stains and enamels; EU number - Setal 16 WX-65
Linseed Oil
F. Modified alkyds
Rosin - Phenolic
Setal 12-1341 60% Z2 - Z4 xyl/ VM&P Setal 12-1628 50% X - Z xyl Setal 12-1646 50% W - Y xyl Setal 52-1646 60% X-Z t-BuAc/ A-100/ n-BuAc D - H @ 35% 8.2 22 max 10 max na in VM&P C - F @ 40% in xyl 8.3 26 - 32 11 max na excellent water resistance, hardness and corrosion, air dry and 2K, short, tall oil alkyd, see 22-1343 for HS version good re-coat, short, linseed oil alkyd; improved corrosion resistance meets TT-P-664C for rust inhibiting lacquer resistant primer, air dry and 2K, short, linseed oil alkyd Setal 12-1646 in t-BuAc blend, non-HAPS
G - J @ 40% 8.3 32 max 12 max na in xyl L - P @ 50% in t-BuAc C - E @ 45% in ms na 8.6 32 max 12 max na
Silicone
8.0
8 max
8 max
na
tough, abrasion resistant, meets TT-E-490E, soya oil alkyd; low HAPs
G. Thixotropic alkyds
Setal 11-2332 40%
gel
MS/ xyl
7.0
9 - 14
8 max
na
good flow, brushing and non-sagging, medium tall oil; low HAPs
Product Information
A. Styrenated
Setyrene 13-1405 60% Z2 - Z4 xyl Setyrene 13-1807 50% X - Z VM&P/ tol/ n-BuAc/ xyl
T - V @ 50% 8.3 14 max 6 max na In xyl E - G @ 40% 7.6 10 max 6 max na in xyl
faster-dry enamels, sealers and primers, soya oil alkyd, meets MILE52891B fast-dry enamels and sealers, better flexibility and film integrity, soya/DCO alkyd, Rule 66 solvent blend, meets MIL-E52891B
B. Vinyl toluenated
Setyrene 13-2404 60% Y - Z1 VM&P Setyrene 13-2424 60% Z - Z1 VM&P Setyrene 13-2434 50% Z1 - Z3 VM&P Setyrene 13-2441 60% Z1 - Z3 VM&P/xyl
Soya Oil
na na na
fast dry, aerosol, enamels and wood sealers; non-HAPs very fast dry, stain stopper, aliphatic solubility; low HAPs very fast dry, aerosol and dryfall coatings, higher drink; non-HAPs very fast dry, aliphatic solubility, alkyd holdout and build, Rule 66 solvent; low HAPs
C. Acrylic modified
Setyrene 13-3504 50% P - T xyl Setyrene 53-3504 60% Y - Z1 t-BuAc/ A-100/ n-BuAc
C - E @ 40% 8.1 4 - 10 5 max na in xyl O - T @ 50% in t-BuAc O - S @ 50% in tol D - G @ 40% in VM&P 8.3 8.4 7.9 4 - 10 10 max 10 max 5 max 4 max 5 max na na na
very fast dry, adhesion and durability, decorative enamels, transportation, aerosol Setyrene 13-3504 in t-BuAc blend; non-HAPs fast dry with good gloss, adhesion and durability, suitable for aerosol use fast dry, aliphatic tolerance slower drying, good adhesion, exceptional flow and leveling, roll coat application
ASTM Type I
C - E @ 50% in ms
7.6
2 max
5 max
na
tough and mar-resistant with good adhesion; non-HAPs tough and mar-resistant with good adhesion, eggshell and low gloss finishes; non-HAPs
Product Information
Saturated Polyesters
coil applied coatings, good post-cure flexibility, cold crush flexibility and exterior durability linear polyester for permanent flexibility in coil coatings, metal deco and post formed applications, good combination of flexibility and hardness; low HAPs branched, excellent corrosion resistance, skydrol resistance, for 2K coating systems; EU number - Setal 169 SS-67; low HAPs high hardness, very good adhesion and flexibility, good chemical and water resistance, automotive finishing systems; EU number - Setal 173 VS-60
Setal 16-1094 68% X - Z A-100 na 8.9 10 max 3 max 1618 Setal 16-1169 67% Z1 - Z3 n-BuAc/ xyl na 9.0 4 max 300 max 212 APHA
Setal 16-1173 60% 1.1 - 1.8 Pa.s. A-100/ xyl/ PGME na 8.7 10 max 4 max 817
A. Thermoplastic
S - V @ 41% 8.2 5 max in xyl U - Y @ 30% 8.0 34 - 40 in tol H - N @41% 9.6 5 max in nBuAc D - G @ 40% 8.3 4 max in tol
na
fast dry, exterior durable, for use in clear and pigmented coatings exceptional dry, adhesion, and sanding properties, for vehicle refinish primers Setalux 17-1261 in exempt solvents; non-HAPs excellent aliphatic tolerance, good compatibility with med oil alkyds, exterior durable, for use in pigmented coatings
B. Acrylic polyols
L - P @ 50% 8.5 10 max 2 max 600 in xyl 125 max 400 APHA 100 max 380 APHA 2 max 600
excellent drying, application and performance properties, a balance of performance and economy good durability, yellow resistant; better flow, leveling and overspray wet-in; EU number - Setalux 1152 SS-51 good appearance, excellent durability and gloss retention, good flow and leveling properties industrial maintenance systems, good exterior durability; low HAPs Acrylic polyol for clearcoat, monocoat and high end industrial topcoats. Very good exterior durability, gloss, end hardness and adhesion over metallic basecoats. excellent durability and drying properties, good pigment grinding resin, good flexibility, better flow, leveling and overspray wet-in, non HAPS, VR and GIF applications; non-HAPs
xyl/ A-100/ na 8.2 6 - 10 n-BuAc M - P @ 50% 8.7 10 max in xyl na 8.3 8 max
Setalux 17-1198 70% Y - Z1 n-butyl acetate na 8.2 4.2 - 9.2 50 max 400 APHA Setalux 17-1445 70% Z1 - Z3 MAK K - N @ 60% 8.5 14 - 18 150 max 400 in MAK APHA
Product Information
30 max 400 APHA 100 max 380 APHA 125 max APHA 400
excellent drying, flow and leveling, durability and yellowing resistance properties, good flexibility, very low color excellent durability and yellowing resistance, low VOCs; EU number Setalux 1156 K-70; non-HAPs good durability, yellowing resistance; VOC compliant; non-HAPs excellent dry, exterior durability, good flexibility and chemical resistance, economy grade This is the same polymer as 17-1608 supplied in an exempt solvent blend for lower VOC applications. Suitable for fast drying, durable 2K systems; non-HAPs Setalux 17-1608 in PMAc Setalux 17-1608 in Oxsol 100; VOC compliant; non-HAPs Setalux 17-1608 in n-BuAc; non-HAPs premium resin, rapid set to touch and dry, superior gloss for Industrial Maintenance and Vehicle Refinish systems; non-HAPs very fast dry, exterior durability, good flexibility and chemical resistance, good adhesion to plastic, excellent application appearance; non-HAPs excellent pigment grinding resin, acid-etch Setalux 17-1762 in n-BuPr; non-HAPs Setalux 17-1152 in xyl buffable in 2 hours, balance of economy and fast cure premium fast cure resin, long pot-life, excellent early hardness development, buffable in 2 hours; non-HAPs excellent durability, non-yellowing and adhesion with metallic basecoats; EU number - Setalux 1156 XS-60
Setalux 17-1488 45% Z2 - Z4 Oxsol 100 na 10.3 6 - 10 Setalux 17-1608 60% Z2 - Z4 xyl
Setalux 57-1608 55% W - Z t-butyl acetate G - K @ 45 8.4 8 - 12 2 max Gardner 600 in tBac Setalux 17-1609 60% Y - Z1 PMAc/ tol Setalux 17-1610 50% Z3 - Z5 Oxsol 100 Setalux 17-1611 60% Y-Z n-BuAc Setalux 17-1619 70% Z4- Z6 PMAc I - L @ 50% 8.7 8 - 12 in tol T - W @ 40% in O-100 10.3 8 - 12 70 max APHA 2 max 40 max APHA 600 600 600
Setalux 17-1745 50% Z2 - Z4 n-BuAc na 8.4 6 - 8 1 max 850 Setalux 17-1762 65% Z2 - Z4 xyl Setalux 17-1763 65% Z1 - Z3 n-BuPr T - V @ 55% 8.4 6 max in xyl V - Y @ 60% 8.4 6 max in n-BuPr 250 max APHA 250 max APHA 125 max APHA 50 max APHA 600 600 400 550
Setalux 17-2152 51% U - X xyl na 8.2 6 - 10 Setalux 17-2400 63% Z2 - Z4 n-BuPr/ xyl Setalux 17-2450 65% Z3 - Z5 n-BuPr U - X @ 55% 8.5 7 - 12 in xyl P - T @ 55% 8.5 7 - 12 in n-BuPr
Product Information
G-Cure 105P70 70% 10000-14000 PM Acetate na 9.1 na 100 max 570 G-Cure 107A70 70% 1500-2500 MnAK na 8.5 na 100 max 460 G-Cure 108A70 70% 3500-5500 MnAK na 8.6 na 100 max 535 G-Cure 109A75 75% 8000-12000 MnAK na 8.7 na 200 max 420 G-Cure 109O60 60% 5000-9000 Oxsol 100 na 10 na 200 max 420 G-Cure 110A77 77% 5000-8000 MnAK na 8.8 na 100 max 500 G-Cure 114A80 80% 3000-6000 MnAK na 8.5 na 200 max 800 G-Cure 114BL80 80% 6000-10000 n-butyl Acetate na 8.6 na 200 max 800 G-Cure 116A70 70% 1000-4000 MnAK na 8.6 na 100 max 700 G-Cure 116BL70 70% 3000-6000 n-butyl Acetate na 8.8 na 100 max 700 G-Cure 176BL76 76% 6500-13000 n-butyl Acetate na 8.6 na 200 max 460 G-Cure 177A70 70% 1500-2500 MnAK na 8.5 na 100 max 460 G-Cure 177BL70 70% 1500-2500 n-butyl Acetate na 8.8 na 100 max 460 G-Cure 192BL80 80% 3000-7000 n-butyl Acetate na 8.6 na 200 max 400 G-Cure 196BL80 80% 9000-12000 n-butyl Acetate na 8.7 na 100 max 800
Nuplex part #17-0105 - For industrial maintenance and automotive refinish. Exhibits superior gloss retention/yellowing resistance and rapid property development. Nuplex part #17-0107 - Heavy-duty maintenance coatings. Excellent chemical and weathering resistance. Nuplex part #17-0108 - Lower VOC version of G-CURE 105. Superior gloss retention/yellowing resistance for low-VOC, spray, brush, and roll applications. Nuplex part #27-0109 - For heavy-duty maintenance and industrial coatings. Improved chemical and weathering resistance. Excellent pigment wetting resin designed for high cross-link density. Nuplex part #17-0109 - This is the same polymer as 109A75 supplied in exempt solvent for lower VOC. Nuplex part #27-0110 - Premium exterior durability with high cross-link density for high performance coatings. Nuplex part #27-0114 - High-solids, low isocyanate demand, flexible and impact resistance. Used in light-duty maintenance, transportation and bridge coatings. Nuplex part #27-0115 - High-solids, low isocyanate demand, flexible and impact resistance. Used in light-duty maintenance, transportation and bridge coatings. Nuplex part #17-0116 - Economy polyol with good durability, hardness, and with very low isocyanate demand. Nuplex part #17-0117 - Economy polyol with good durability, hardness, and with very low isocyanate demand. Nuplex part #27-0176 - This is the same polymer as 107A70 supplied in n-butyl acetate at higher solids content. Nuplex part #17-0177 - Fast set version of G-CURE 107A70 for heavyduty maintenance coatings. Excellent chemical and weathering resistance. Nuplex part #17-0178 - Fast set hydroxyl functional acrylic copolymer designed to produce low VOC high performance coatings. Coatings with an application VOC of 3.0 lbs./gal. can be produced for heavy-duty maintenance and industrial coatings. Excellent chemical and weathering resistance. Nuplex part #27-0192 - Fast Set version of TSAX 13-501. Suitable for high-performance maintenance and transportation coatings. Nuplex part #27-0196 - High-solids, low isocyanate demand. Used in lightduty maintenance, transportation, marine and bridge coatings.
Product Information
G-Cure 601P75 75% 3000-10000 PM Acetate na 9 na 100 max 204 G-Cure 806BL60 61 2000-4000 n-butyl Acetate na 8.5 na 60 max 625 G-Cure 806PT60 60 5000-7500 PM Acetate Toluene na 8.8 na 60 max 625 G-Cure 806X60 58.5 5000-7000 Xylene na 8.5 na 60 max 636 G-Cure 836PT60 60 2000-4000 PM Acetate Toluene na 8.7 na 60 max 625 G-Cure 867PWF60 60 3500-5000 PM Acetate na 8.5 na 100 max 635 Ethyl Benzene HFBA4 G-Cure 867PX60 60 3500-5000 PM Acetate Xylene na 8.6 na 100 max 635 G-Cure 868PWF60 60 4500-6500 G-Cure 869PWF50 50 3500-7000 PM Acetate na 8.5 na 100 max 795 Ethyl Benzene HFBA4 PM Acetate na 8.4 na 100 max 1085 Ethyl Benzene HFBA4
Nuplex part #27-0601 - High cross-linking, good chemical and Skydrol resistance for heavy-duty maintenance and aerospace applications. Nuplex part #17-0806 - These polyols are used primarily in the automotive refinishing market. They have excellent durability/flexibility, and weatherability. They exhibit excellent chemical resistance and hardness on metallic substrates. Nuplex part #17-0807 - These polyols are used primarily in the automotive refinishing market. They have excellent durability/flexibility, and weatherability. They exhibit excellent chemical resistance and hardness on metallic substrates. Nuplex part #17-0808 - These polyols are used primarily in the automotive refinishing market. They have excellent durability/flexibility, and weatherability. They exhibit excellent chemical resistance and hardness on metallic substrates. Nuplex part #17-0836 - These polyols are used primarily in the automotive refinishing market. They have excellent durability/flexibility, and weatherability. They exhibit excellent chemical resistance and hardness on metallic substrates. Nuplex part #17-0867 - Superior end-use range of premium, urethane exterior, and interior maintenance coatings. Outstanding adhesion, corrosion, and chemical resistance. Offers excellent aliphatic polyisocyanate compatibility at low use-levels for development of superior coating properties. Nuplex part #17-0866 - Superior end-use range of premium, urethane exterior, and interior maintenance coatings. Outstanding adhesion, corrosion, and chemical resistance. Offers excellent aliphatic polyisocyanate compatibility at low use-levels for development of superior coating properties. Nuplex part #17-0868 - Modifier, flexibilizer for other G-CURE acrylic resins to improve exterior durability and yellowing resistance. Nuplex part #17-0869 - Rapid tack-free dry time for assembly-line type applications. Modifier for improving the dry-time character of other polyols. Nuplex part #17-0870 - Faster-dry, high-gloss version of G-CURE 869PWF50. Nuplex part #27-0501 - High-solids acrylic polyol for high-performance maintenance and transportation coatings. Nuplex part #27-0722 - Premium exterior durability. Recommended for medium-duty maintenance applications.
G-Cure 870BLX50 50 3000-5000 PM Acetate Toluene na 8.4 na 100 max 822 TSAX 13-501 70% 3000-7000 n-butyl Acetate na 8.6 na 200 max 400 TSAX 13-722 72.5% 1000-3500 MnAK na 8.6 na 150 max 500
Product Information
10
TSAX 13-916 70% 1000-1800 Xylene na 8.4 na 100 max 950 TSAX 13-939 60 5000-7500 PM Acetate Toluene na 8.8 na 60 max 625 TSAX 13-955 80% 3000-7000 n-butyl Acetate na 8.6 na 200 max 400 TSAX 14-057 80% 2000-5000 Xylene Ethylbenzene na 8.7 na 200 max 435 TSAX 14-284 70% 10000-14000 PM Acetate na 9.1 na 100 max 570 TSAX 14-313 65 15000-19000 n-butyl Acetate na 8.7 na 200 max 638 TSAX 14-412 70% 2500-6000 MnAK na 8.5 na 100 max 460
Nuplex part #17-0391 - Economy polyol with very low isocyanate demand for light-duty maintenance. Nuplex part #17-0393 - These polyols are used primarily in the automotive refinishing market. They have excellent durability/flexibility, and weatherability. They exhibit excellent chemical resistance and hardness on metallic substrates. Nuplex part #27-0395 - Fast Set high-solids, good impact resistance polyol for high-performance maintenance and transportation coatings. Nuplex part #27-0057 - Premium exterior durability. Recommended for medium to heavy-duty maintenance applications. Nuplex part #17-0284 - Designed for high build, higher volume solids acrylic urethane topcoats and primers. Formulations can be designed for high gloss, lower solvent industrial maintenance coatings. Nuplex part #17-0313 - Superior end-use range of premium, urethane exterior, and interior maintenance coatings. Outstanding adhesion, corrosion, and chemical resistance. Offers excellent aliphatic polyisocyanate compatibility at low use-levels for development of superior coating properties. Nuplex part #17-0941 - Lower color version of 107A70.
Product Information
11
Epoxy Esters
Setal 18-1011 50% W - Y Xylene Setal 18-1123 50% W - Y xyl Setal 18-1127 60% Y - Z1 MS Setal 18-1301 70% Z - Z2 n-BuAc Setal 28-4001 75% Z4 - Z6 MS
I - L @ 40 8 2.5 max 7 max Gardner na in xylene J - M @ 40% 8.0 5 max 6 max na in xyl H - J @ 40% in ms R - U @ 60% in n-BuAc YZ1 @ 65% in MS 7.7 8.5 7.9 10 max 3 max 12 max 6 max 6 max 10 max na na na
Broad use in corrosion-resistant primers for metal. Can be air-dried, forcedried, or crosslinked with an amino crosslinker in a bake application. fast dry, excellent adhesion, chemical and corrosion resistance, industrial primer applications general purpose primers, DIY, trade sales; non-HAPs high solids; non-HAPs high solids, general purpose primers, DIY, trade sales
Iso-Butylated
F - G
iso-BuOH/ tol
na
8.3
2 max
1 max
na
harder, lower viscosity, quicker cure than Setamine 19-1001 very fast curing, suitable for high-speed wood coatings, 0.7% max free formaldehyde fastest curing, suitable for high-speed wood coatings, 0.7% max free formaldehyde ultra low free formaldehyde < .02%, low HAPs
Setamine 19-1020 60% Y - Z1 iso-BuOH/ xyl na 8.5 2 max 1 max na Setamine 19-1023 50% W - Z iso-BuOH/ xyl na 8.5 2 max 1 max na Setamine 19-1050 63% X - Z1 iso-BuOH na 8.4 3 max 50 max APHA na
Setamine 19-3138 70% 1.1 - 1.7 Pa.s. n-BuOH na 8.6 0.8 max 50 max na
butylated melamine-formaldehyde; fast cure, excellent acid etch, EU number - Setamine US-138 BB-70; low HAPs
Product Information
12
Tall Oil
Soya Oil
modifier for cure and telegraphing resistance, high acid value, improves crosslink density in bake systems
B. Chain-stopped alkyds
Tall Oil
Setal 21-1392 75% Z4 - Z6 n-BuAc/ tol U - W @ 65% in n-BuAc 9.1 15 max 8 max 450 good wetting and adhesion, economical
Soya Oil
Setal 21-1491 75% Z1 - Z3 MIBK/ MPK/ xyl Setal 21-1493 75% Z - Z2 xyl/ MPK Setal 21-1494 75% Z2 - Z4 tol/ MPK Setal 21-1498 75% Z3 - Z5 n-BuAc/ MAK
J - M @ 60% 8.7 12 max 8 max 1200 in xyl G - I @ 60% in xyl 8.8 10 max 6 max 1200
very fast air dry, excellent hardness, high gloss, good humidity, excellent color retention and early water spot resistance excellent corrosion resistance and QUV excellent hardness, slight improvement in salt spray and QUV versus Setal 21-1491 Setal 21-1491 in n-BuAc/ MAK; non-HAPs
M - P @ 60% 8.8 12 max 8 max 1100 in xyl R - U @ 65% in n-BuAc 8.9 12 max 10 max 1200
Tall Oil
F - H @ 70% in xyl
9.0
5 max
7 max
380
low VOC general metal bake coatings meets HS TTE-489 mil spec, excellent modifying resin for short oil alkyd systems; low HAPs good flexibility, durability, high film build; low HAPs
B - D @ 60% 8.7 14 max 7 max 1700 in n-BuAc E - I @ 60% in MAK 8.6 10 max 8 max na
Soya / Linseed
Setal 21-2662 80% Z3 - Z5 MAK/ xyl
Non-Oxidizing
Setal 21-2820 75% Z3 - Z5 n-BuAc/ xyl/ tol T - V @ 65% 8.9 24 - 32 6 max 350 in n-BuAc
modifier for pre-cat lacquers and conversion varnishes, plasticizer, promotes adhesion; low HAPs
Product Information
13
Soya
ultra high solids, VOC compliant interior and exterior stains, modifier for waterborne systems to improve chalk adhesion; low HAPs
ultra high solids, VOC compliant interior and exterior stains, modifier for waterborne systems to improve chalk adhesion, slightly slower dry than Setal 21-3461; low HAPs This is the lower HAPs alternative of the popular 21-3461, offering high solids with good drying properties for durable exterior or interior architectural end uses; low HAPs ultra high solids, for use in stains or for pigment grinding, modifier for waterborne systems to improve chalk adhesion; low HAPs High solids very long-oil alkyd resin; very good brushability, leveling, filling, high gloss, low yellowing tendency, and good through-hardening
Linseed
Sunflower
E. Modified alkyds
n-BuAc/ MPK/ xyl/ G - I @ 60% 8.8 15 max 13 max na MIBK in xyl W - Y @ 70% 8.6 12 max 8 max na in ms
rosin / phenolic modified, for non-lifting primer vehicle, HS TTP-664C type; low HAPs 30 % silicone-modified, tough, abrasion resistant, meets TT-E-490E and MIL- PRF-24635C; non-HAPs
F. Copolymer alkyds
I - N @ 60% 8.2 8 max 6 max na in xyl V - X @ 70% in MPK U - X @ 70% in n-BuAc W - Z @ 70% in MPK 8.5 8.6 8.5 15 max 15 max 2 max 5 max 7 max 6 max 1300 1300 1300
vt modified, very fast set and dry speed, good specular gloss, aliphatic solvent tolerant acrylic modified, excellent exterior durability, good early water resistance Setyrene 23-3317 in n-BuAc/ MAK; non-HAPs acrylic modified, superior durability and early water resistance
Setyrene 23-3317 80% Z5 - Z7 MAK/ MPK/ xyl Setyrene 23-3319 80% Z5 - Z7 n-BuAc/ MAK Setyrene 23-3320 75% Z3 - Z6 MAK/ MPK/ nBuAc/ A100/ MIBK
soya oil, 350 g/l VOC compliant varnishes, blending resin for conventional systems to reduce viscosity; non-HAPs
Product Information
14
2.8 lb. VOC, general industrial or appliance use, stain and chemical resistance, excellent corrosion resistance 2.3 lb. VOC, general industrial or appliance use, general purpose workhorse resin < 2.3 lb. VOC, excellent hardness, toughness, gloss, flow, durability, lower temperature cure, telegraph resistance; non-HAPs < 2.3 lb. VOC, linear flexibilizing resin, high performance, outstanding balance of flex, hardness and impact resistance, good chemical resistance for 2K systems; low HAPs 2.8 lb. VOC, tough, hard, flexible coatings with good exterior exposure, for 2K systems flexibilizing modifier, good chemical resistance, for 2K systems; low HAPs slightly branched, outstanding flexibility, chemical and solvent resistance, durability, for aerospace topcoats; EU number - Setal 168 SS-80; low HAPs Polyester polyol for automotive 1K or 2K clearcoats or topcoats; very good outdoor durability, gloss retention and no yellowing in QUV, good mechanical properties and chemical resistance
Setal 26-1035 90% Z3 - Z5 xyl/ tol na 8.9 5 max 5 max 280 Setal 26-1056 95% Z4 - Z6 n-BuAc S - V @ 85% 8.9 26 - 30 4 max 250 in n-BuAc
Setal 26-1610 98% Z3 - Z5 tol na 8.8 3 max 3 max 260 Setal 26-1611 84% Z3 - Z5+ n-BuOH/ xyl/ tol Setal 26-1617 80% W - Y n-BuAc/ tol D - F @ 65% 9.1 10 max 3 max 300 in xyl na 8.9 3 max 3 max 380
Setal 26-1688 80% 1.3 - 3.5 Pa.s. n-BuAc/ xyl na 9.2 2 max
Setal 26-1715 72% Z1+ - Z3+ Aromatic 100/xylene na 8.8 9 - 13 25 max 400 APHA
Setalux 27-1026 80% Z2+ to Z4+ MAK Setalux 27-1316 80% Z3 - Z5 n-BuAc Setalux 27-1460 74% Z5 max
R - U @70% in MAK
8.7
10 max
2 max
480
2.3 to 3.2 lb. VOC formulations, excellent durability; non-HAPs 2.0 to 2.8 lb. VOC formulations, economical, good balance of cost and performance; non-HAPs Acrylic polyol for very low VOC clearcoats and topcoats; faster drying flow VOC coatings, very good flow and leveling, excellent durability and chemical resistance; low HAPs 2.0 to 2.8 lb. VOC formulations, bake or 2K, low VOC modifier; non-HAPs 2.0 to 2.8 lb. VOC formulations, fast dry, exterior durable; non-HAPs 2.3 to 3.2 lb. VOC formulations, premium quality; non-HAPs excellent pigment wetting properties, blending resin for low VOCs; non-HAPs
MAK/t-butyl na 8.9 6 - 10 50 max APHA 400 acetate/methyl acetate 100 max APHA 100 max APHA 3 max 100 max 400 400 400 320
Setalux 27-1550 80% Z1 - Z3 MAK na 8.7 4 max Setalux 27-1590 80% Z1 - Z3 MAK na 8.6 4 max Setalux 27-1597 80% Z4 - Z6 MAK Setalux 27-2677 90% Z5 - Z6 n-BuPr U - X @ 70% in MAK na 8.8 9.3 8 max 3 - 5
Product Information
15
Setamine 29-1100 85% Y - Z1 n-BuOH/ EtOH na 8.9 1 max 1 max na Setamine 29-3090 80% Z3 - Z6 n-BuOH
butylated urea formaldehyde; broad general use, lower VOCs, high gloss; low HAPs butylated melamine-formaldehyde; crosslinker for low VOCs; low HAPs
Product Information
W1
A. Thermoplastic Emulsion
Setaqua 6479 50 Acrocryl 63-980 50
950 cps
8.5 8.5
4 25
Designed for cosolvent free; low VOC coatings for a wide range of architectural applications. Designed for high performance interior/exterior coatings; exhibits high degree of durability. Designed for coalescent-free low-temperature film formation; used to formulate low-odor and low/zero VOC broadwall finishes, with good scrub, block, and mud-cracking resistance. High molecular weight PVAc copolymer exhibiting outstanding scrub and wear resistance. Adhesion promoted; excellent flexibility; cement compatibility; resistance to aging and light; waterproof membranes; caulking, sealing, gap filler compounds. Carboxyl-functional copolymer; good mechanical stability and pigment loading. Excellent adhesion to metal, wood, and plastic; blends well with water reducible resins; general industrial finishes. High gloss; excellent corrosion resistance; industrial direct to metal topcoat enamels. Good pigment wetting; carrier vehicle modifier; pigment vehicle. Used in anti-corrosive coatings of relatively low PVC; offers hard, impact resistant films with high water and salt spray resistance. High performance interior wall binder; high stain and water resistance with good scrub performance. Fine particle size; adhesion promoted; excellent film performance; variety of paint types and gloss levels; excellent tannin stain resistance. Surfactant stabilized; VA/VeoVA copolymer exhibiting excellent wet adhesion and pigment binding characteristics. High water and alkali resistant polymer with very fine particle size; excellent adhesion to a broad range of substrates; used in primer/sealers, textured coatings, masonry and industrial paints. Moderately soft styrene acrylic for use in modified cementitious systems; typically two component for repair and patch mortars. Surfactant free; fine particle size; excellent pigment wetting; excellent speed of cure and water resistance; traffic paints. Fine particle size; APE free; adhesion promoter; high performance; high quality interior/exterior paint systems. Adhesion promoter; high performance; high quality interior/exterior paint systems. Hydrophobic; very fine particle size; high alkali and UV resistance; high performance deco and light industrial clear and pigmented applications.
950 cps
Acropol 63-953 55 2,000 cps 5.2 2 Acropol 63-993 55 3,500 cps 5.2 13
Setaqua 6402 57 1,600 cps 8.0 0 Setalux 6438 Setalux 6472 Setalux 6490 Setalux 6482 45 40 44 52 750 cps 100 cps 200 cps 200 cps 9.5 7.5 8.5 8.5 65 40 25 85
Setaqua 6471 48 700 cps 8.5 20 Viscopol 1904 50 1,000 cps 7.0 15
Setaqua 6400 50 6,000 cps 6.0 17 Setaqua 6476 47 30 secs 9.2 5 Setaqua 6463 50 500 cps 10.0 5 Setaqua 6409 Setaqua 6488 50 50 500 cps 500 cps 8.5 8.7 18 18
Product Information
W2
Setalux 37-5045 55 200 cps 7.5 0 Setalux 37-6756 40 1000 cps max 8.0 na Setalux 6766 40 150 cps 8.5 50
B. Self-Crosslinking Emulsion
All acrylic; very good flexibility and elongation properties; good durability and dirt pick-up resistance; elastomeric coatings. Self-crosslinking emulsion with rapid hardness development, good sandability and excellent film and in-can clarity. Recommended for OEM wood clear coat applications; non-HAPs Excellent block and chemical resistance; plastic, wood and concrete coatings. All acrylic; APE free; improved durability; excellent film clarity, gloss, durability and stain resistance; concrete applications. Gradient morphology; good balance of hardness, flexibility and chemical resistance; general purpose for metal and wood. APE free; gradient morphology; high gloss; excellent blocking resistance; improved durability; wood and concrete. Crosslinking; hydrophobic; UV durable for high performance glazes/sealers over concrete, wood, metal substrates. Crosslinking; hydrophobic; UV durable for high performance glazes/sealers over concrete, wood, metal substrates. Crosslinking; hydrophobic; UV durable for high performance glazes/sealers over concrete, wood, metal substrates; ideal for primed or DTS baking applications. Excellent exterior durability; adhesion; excellent flow and leveling; industrial enamels and maintenance primers; crosslink with melamine. NMP free polyurethane emulsion; good hardness development and chemical & abrasion resistance; flooring, furniture & joinery application.
Setalux 37-6768 40 100 cP max 8.0 8 Setalux 37-6770 Setalux 37-6781 Setaqua 6572 Setaqua 6573 44 44 50 700 cps 75 cps 400 cps 400 cps 9.0 7.5 8.8 8.8 15 17 32 14
C. Thermoset Acrylic
50
Setaqua 6576 50 3,000 cps 7.0 48 Setaqua 6562 44 300 cps 7.5 15 Setal X11707 36 1,000 Pa.s 8.0 <0 Setal X11712 Setalux X11717 45 35 0.55 Pa.s 100 Pa.s 7.0 8.5 -- --
D. Polyurethane Dispersions
Fatty acid modified; NMP free; primer and topcoat for metal. Good hardness and chemical resistance for deco and wood applications. TOFA based; fast dry; excellent gloss retention; good corrosion resistance; low application viscosity; general purpose industrial coatings.
E. Acrylic/Urethane Hybrid
TOFA based; superior hydrolytic stability; good early water resistance; very fast dry; good corrosion resistance; general industrial coatings. Soya/TOFA chain stopped alkyd featuring fast air dry; primers and gloss enamels; can be force dried or stoved. Soya based; improved durability; 2.8 lb/gal VOC; good flexibility; industrial coatings. Chemical-, corrosion-, and humidity resistance; good adhesion and durability; blend with Setalux 37-3372 for faster dry; bake primer for maintenance.
High performance urethane-modified alkyd suitable for both wood and metal applications. Fast drying and durable; non-HAPs
Creating the Solution Together! Waterborne resins (continued) XIII Waterborne resins (continued)
TWO COMPONENTS % NVM Viscosity pH/AV Tg/MFFT (C) Features:
Product Information
W3
A. Acrylic Dispersions
Setaqua 6511 47 5.5 cPa.s 8.0 12 Setaqua 6512 42 4.5 cPa.s 8.0 32 Setaqua 6520 45 10 cPa.s 6.8 45
All acrylic; 400 HEW on solids; crosslink with isocyanates; economical; good flexibility; industrial high gloss varnishes and topcoats. All acrylic; 800 HEW on solids; crosslink with isocyanates; economical; good flexibility; industrial high gloss varnishes and topcoats. All acrylic; 530 HEW on solids; very good drying properties, good mechanical properties and good water resistance; primers and topcoats; non-HAPs
B. Rheology Modifiers
Setaqua 6801 24
22.5 Pa.s
6.4
Optimized rheology for excellent atomization and aluminium orientation; zero VOCs; VR and OEM basecoat.
Setaqua 6802 24 65 Pa.s 7.0 51 Same as Setalux 37-6801 with increased pseudoplasticity.
C. Polyester Polyols
630 HEW; water soluble after neutralization; good pigment wetting; good stabilization of aluminum pigments; grind resin for waterborne basecoats. Excellent pigment wetting; good stabilization of aluminum pigments; improves film forming and flow; automotive OEM and VR basecoats.
key
AcAc EW: low HAPs: non-HAPs: Non - iso: aceto acetate equivalent weight, on n.v. low HAPs content, generally 7 pbw or less based on total solvent zero HAPs content, based on total solvent non-isocyanate containing coating resins system SCA VR GIF sag control agent vehicle refinishes general industrial finishes
high solids resins (>70% unless otherwise specified) can typically be used to produce coatings at 3.5 pounds per gallon VOC
All information, recommendations and suggestions, concerning the product and its use, are believed to be reliable. However, Nuplex Resins gives no assurance as to the accuracy, completeness, or adequacy for a particular purpose. It is the users responsibility to determine the suitability for its own use of the products. No guarantee or warranty (whether expressed or implied including the warranties of merchantability and fitness for a particular purpose which are hereby disclaimed) is made by Nuplex Resins as to the results to be obtained from using the described products, nor shall Nuplex Resins be liable for any use by others of the described products. Users are responsible for ensuring compliance with local legislation and for obtaining the necessary certifications and authorizations. All orders are subject to the general conditions of sale of Nuplex Resins, which are printed overleaf and/or can be downloaded from www.nuplexresins.com. All of users general terms and conditions are herewith deemed rejected. Nuplex Resins owns all copyrights and other intellectual property rights in the content of this document. Reproduction or redistribution in any form is not allowed.
Nuplex Resins
Louisville, KY 40209
Phone: 1.800.873.5410
www.nuplexresins.com
05/08