Anda di halaman 1dari 10

2803 THRU 2824

HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON ARRAYS


1 2 3 4 5 6 7 8 9 18 17 16 15 14 13 12 11 10

Featuring continuous load current ratings to 500 mA for each of the drivers, the Series ULN28xxA/LW and ULQ28xxA/LW highvoltage, high-current Darlington arrays are ideally suited for interfacing between low-level logic circuitry and multiple peripheral power loads. Typical power loads totaling over 260 W (350 mA x 8, 95 V) can be controlled at an appropriate duty cycle depending on ambient temperature and number of drivers turned on simultaneously. Typical loads include relays, solenoids, stepping motors, magnetic print hammers, multiplexed LED and incandescent displays, and heaters. All devices feature open-collector outputs with integral clamp diodes. The ULx2803A, ULx2803LW, ULx2823A, and ULN2823LW have series input resistors selected for operation directly with 5 V TTL or CMOS. These devices will handle numerous interface needs particularly those beyond the capabilities of standard logic buffers. The ULx2804A, ULx2804LW, ULx2824A, and ULN2824LW have series input resistors for operation directly from 6 V to 15 V CMOS or PMOS logic outputs. The ULx2803A/LW and ULx2804A/LW are the standard Darlington arrays. The outputs are capable of sinking 500 mA and will withstand at least 50 V in the off state. Outputs may be paralleled for higher load current capability. The ULx2823A/LW and ULx2824A/ LW will withstand 95 V in the off state. These Darlington arrays are furnished in 18-pin dual in-line plastic packages (suffix A) or 18-lead small-outline plastic packages (suffix LW). All devices are pinned with outputs opposite inputs to facilitate ease of circuit board layout. Prefix ULN devices are rated for operation over the temperature range of -20C to +85C; prefix ULQ devices are rated for operation to -40C.

Data Sheet 29304.3E

Dwg. No. A-10,322A

Note that the ULx28xxA series (dual in-line package) and ULx28xxLW series (smalloutline IC package) are electrically identical and share a common terminal number assignment.

ABSOLUTE MAXIMUM RATINGS


Output Voltage, VCE (x2803x and x2804x) ..................... 50 V (x2823x and x2824x) ..................... 95 V Input Voltage, VIN .............................. 30 V Continuous Output Current, IC .... 500 mA Continuous Input Current, IIN ....... 25 mA Power Dissipation, PD (one Darlington pair) .................. 1.0 W (total package) ..................... See Graph Operating Temperature Range, TA Prefix ULN .............. -20C to + 85C Prefix ULQ ............... -40C to +85C Storage Temperature Range, TS ................................ -55C to +150C

FEATURES
I TTL, DTL, PMOS, or CMOS Compatible Inputs I Output Current to 500 mA I Output Voltage to 95 V I Transient-Protected Outputs I Dual In-Line Package or Wide-Body Small-Outline Package

x = Character to identify specific device. Characteristic shown applies to family of devices with remaining digits as shown. See matrix on next page.

2803 THRU 2824 HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON ARRAYS


DEVICE PART NUMBER DESIGNATION
VCE(MAX) IC(MAX) Logic 5V TTL, CMOS 6-15 V CMOS, PMOS 50 V 500 mA Part Number ULN2803A* ULN2803LW* ULN2804A* ULN2804LW* ULN2823A* ULN2823LW ULN2824A* ULN2824LW 95 V 500 mA

*Also available for operation between -40C and +85C. To order, change prefix from ULN to ULQ.

PARTIAL SCHEMATICS
ULx28x3A/LW (Each Driver)
COM
2.7K

ALLOWABLE PACKAGE POWER DISSIPATION IN WATTS

2.5

2.0

7.2K

3K

SUFFIX 'A', R JA = 60C/W

1.5

Dwg. No. A-9651

1.0

SUFFIX 'LW', R

ULx28x4A/LW (Each Driver)


COM
10.5K

0.5

JA

= 80C/W

0 25

50 75 100 125 AMBIENT TEMPERATURE IN C

150

7.2K

3K

Dwg. GP-018B

Dwg. No. A-9898A

x = Character to identify specific device. Specification shown applies to family of devices with remaining digits as shown. See matrix above.

115 Northeast Cutoff, Box 15036 W Worcester, Massachusetts 01615-0036 (508) 853-5000 Copyright 1977, 1999 Allegro MicroSystems, Inc.

2803 THRU 2824

HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON ARRAYS


Types ULx2803A, ULx2803LW, ULx2804A, and ULx2804LW ELECTRICAL CHARACTERISTICS at +25C (unless otherwise noted).
Characteristic Output Leakage Current Symbol ICEX Test Fig. 1A Applicable Devices All Test Conditions VCE = 50 V, TA = 25C VCE = 50 V, TA = 70C 1B Collector-Emitter Saturation Voltage VCE(SAT) 2 ULx2804x All VCE = 50 V, TA = 70C, VIN = 1.0 V IC = 100 mA, IB = 250 A lC = 200 mA, IB = 350 A IC = 350 mA, IB = 500 A Input Current IIN(ON) 3 ULx2803x ULx2804x VIN = 3.85 V VIN = 5.0 V VIN = 12 V IIN(OFF) Input Voltage VIN(ON) 4 5 All ULx2803x lC = 500 A, TA = 70C VCE = 2.0 V, lC = 200 mA VCE = 2.0 V, IC = 250 mA VCE = 2.0 V, lC = 300 mA ULx2804x VCE = 2.0 V, lC = 125 mA VCE = 2.0 V, lC = 200 mA VCE = 2.0 V, IC = 275 mA VCE = 2.0 V, lC = 350 mA Input Capacitance Turn-On Delay Turn-Off Delay Clamp Diode Leakage Current Clamp Diode Forward Voltage CIN tPLH tPHL IR VF 8 8 6 All All All All 0.5 EIN to 0.5 EOUT 0.5 EIN to 0.5 EOUT VR = 50 V, TA = 25C VR = 50 V, TA = 70C 7 All IF = 350 mA Min. 50 Limits Typ. Max. <1 <1 <5 0.9 1.1 1.3 0.93 0.35 1.0 65 15 0.25 0.25 1.7 50 100 500 1.1 1.3 1.6 1.35 0.5 1.45 2.4 2.7 3.0 5.0 6.0 7.0 8.0 25 1.0 1.0 50 100 2.0 Units A A A V V V mA mA mA A V V V V V V V pF s s A A V

Complete part number includes prefix to operating temperature range: ULN = -20C to +85C, ULQ = -40C to +85C and a suffix to identify package style: A = DIP, LW = SOIC.

www.allegromicro.com

2803 THRU 2824 HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON ARRAYS


Types ULx2823A, ULN2823LW, ULx2824A, and ULN2824LW ELECTRICAL CHARACTERISTICS at +25C (unless otherwise noted).
Characteristic Output Leakage Current Symbol ICEX Test Fig. 1A Applicable Devices All Test Conditions VCE = 95 V, TA = 25C VCE = 95 V, TA = 70C 1B Collector-Emitter Saturation Voltage VCE(SAT) 2 ULx2824x All VCE = 95 V, TA = 70C, VIN = 1.0 V IC = 100 mA, IB = 250 A lC = 200 mA, IB = 350 A IC = 350 mA, IB = 500 A Input Current IIN(ON) 3 ULx2823x ULx2824x VIN = 3.85 V VIN = 5.0 V VIN = 12 V IIN(OFF) Input Voltage VIN(ON) 4 5 All ULx2823x lC = 500 A, TA = 70C VCE = 2.0 V, lC = 200 mA VCE = 2.0 V, IC = 250 mA VCE = 2.0 V, lC = 300 mA ULx2824x VCE = 2.0 V, lC = 125 mA VCE = 2.0 V, lC = 200 mA VCE = 2.0 V, IC = 275 mA VCE = 2.0 V, lC = 350 mA Input Capacitance Turn-On Delay Turn-Off Delay Clamp Diode Leakage Current Clamp Diode Forward Voltage CIN tPLH tPHL IR VF 8 8 6 All All All All 0.5 EIN to 0.5 EOUT 0.5 EIN to 0.5 EOUT VR = 95 V, TA = 25C VR = 95 V, TA = 70C 7 All IF = 350 mA Min. 50 Limits Typ. Max. <1 <1 <5 0.9 1.1 1.3 0.93 0.35 1.0 65 15 0.25 0.25 1.7 50 100 500 1.1 1.3 1.6 1.35 0.5 1.45 2.4 2.7 3.0 5.0 6.0 7.0 8.0 25 1.0 1.0 50 100 2.0 Units A A A V V V mA mA mA A V V V V V V V pF s s A A V

Complete part number includes prefix to operating temperature range: ULN = -20C to +85C, ULQ = -40C to +85C and a suffix to identify package style: A = DIP, LW = SOIC. Note that the ULQ2823LW and ULQ2824LW are not presently available.

115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 (508) 853-5000

2803 THRU 2824

HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON ARRAYS


TEST FIGURES
FIGURE 1A
OPEN VCE

FIGURE 1B
OPEN VCE

FIGURE 2
OPEN

A OPEN ICEX VIN

A ICEX

I hFE = C IB

V IB
Dwg. No. A-9729A Dwg. No. A-9730A

VCE

IC
Dwg. No. A-9731A

FIGURE 3
OPEN

FIGURE 4
OPEN VCE

FIGURE 5
OPEN

A IIN mA VIN OPEN IIN A VIN V VCE


Dwg. No. A-9732A Dwg. No. A-9733A

IC

V IC
Dwg. No. A-9734A

FIGURE 6
VR

FIGURE 7

FIGURE 8
VIN INPUT 50% 50%

A IR OPEN OPEN V VF

IF
OUTPUT t pHL 50% t pHL 50%

+50 V

Vin Dwg. No. A-9735A Dwg. No. A-9736A ULx28x3x ULx28x4x 3.5 V 12 V
PULSE GENERATOR PRR = 10KHz DC = 50%

INPUT 93 30

100 OUT 50 pF

www.allegromicro.com

2803 THRU 2824 HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON ARRAYS


ALLOWABLE COLLECTOR CURRENT AS A FUNCTION OF DUTY CYCLE
ULx28xxA
600 600

ALLOWABLE COLLECTOR CURRENT AS A FUNCTION OF DUTY CYCLE


ULx28xxLW

OUTPUT CURRENT IN mA/CHANNEL

400 4 5 8 200 NUMBER OF OUTPUTS CONDUCTING SIMULTANEOUSLY 7 6

OUTPUT CURRENT IN mA/CHANNEL

400 4 5 6 7 8 200 NUMBER OF OUTPUTS CONDUCTING SIMULTANEOUSLY

TA = +50C RJA = 60C/W

TA = +50C RJA = 80C/W

0 0 20 40 60 80 100
Dwg. GP-070-2

0 0 20 40 60 80 100
Dwg. GP-070-4

DUTY CYCLE IN PER CENT

DUTY CYCLE IN PER CENT

600

600

1
OUTPUT CURRENT IN mA/CHANNEL

1
OUTPUT CURRENT IN mA/CHANNEL

2 400 4 5 6 8 200 NUMBER OF OUTPUTS CONDUCTING SIMULTANEOUSLY TA = +70C RJA = 60C/W 7 3

2 400 3 4 5 6 8 200 NUMBER OF OUTPUTS CONDUCTING SIMULTANEOUSLY TA = +70C RJA = 80C/W 7

0 0 20 40 60 80 100
Dwg. GP-070-1

0 0 20 40 60 80 100
Dwg. GP-070-3

DUTY CYCLE IN PER CENT

DUTY CYCLE IN PER CENT

x = Characters to identify specific device. Specification shown applies to family of devices with remaining digits as shown.

115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 (508) 853-5000

2803 THRU 2824

HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON ARRAYS


INPUT CURRENT AS A FUNCTION OF INPUT VOLTAGE
ULx28x3x
2.5

SATURATION VOLTAGE AS A FUNCTION OF COLLECTOR CURRENT


600

2.0
IN

INPUT CURRENT IN mA I

X MA

IM

UM

COLLECTOR CURRENT IN mA

400
TY PI M CA AX L .S AT UR AT IO N VO LT AG E

1.5
TY PIC AL

1.0

200

0.5

AREA OF NORMAL OPERATION WITH STANDARD OR SCHOTTKY TTL

0 2.0 3.0 4.0 INPUT VOLTAGE


Dwg. GP-069

0
5.0 6.0

0.5

1.0

1.5

2.0
Dwg. GP-067

COLLECTOR-EMITTER SATURATION VOLTAGE

ULx28x4x
2.0

COLLECTOR CURRENT AS A FUNCTION OF INPUT CURRENT


600

COLLECTOR CURRENT IN mA

INPUT CURRENT IN mA IIN

1.5

400
CA L

TY

1.0

MA

PI

XIM

UM

A TYPIC

200

0.5

'D EQ .R X A M

T PU IN

T EN RR U C

0 5 6 7 8 9 10 11 12
Dwg. GP-069-1

0 0 200 400 600


Dwg. GP-068

INPUT VOLTAGE

INPUT CURRENT IN A

x = Characters to identify specific device. Characteristic shown applies to family of devices with remaining digits as shown.

www.allegromicro.com

2803 THRU 2824 HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON ARRAYS


PACKAGE DESIGNATOR A DIMENSIONS
Dimensions in Inches (controlling dimensions)
0.014 0.008

18

10

0.430 0.280 0.240


MAX

0.300
BSC

0.070 0.045

0.100 0.920 0.880


BSC

0.005
MIN

0.210
MAX

0.015
MIN

0.150 0.115 0.022 0.014


Dwg. MA-001-18A in

Dimensions in Millimeters (for reference only)


18 10 0.355 0.204

10.92 7.11 6.10


MAX

7.62
BSC

1.77 1.15

2.54 23.37 22.35


BSC

0.13
MIN

5.33
MAX

0.39
MIN

3.81 2.93 0.558 0.356


Dwg. MA-001-18A mm

NOTES:1. Exact body and lead configuration at vendors option within limits shown. 2. Lead spacing tolerance is non-cumulative. 3. Lead thickness is measured at seating plane or below.

115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 (508) 853-5000

2803 THRU 2824

HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON ARRAYS


PACKAGE DESIGNATOR LW DIMENSIONS
Dimensions in Inches (for reference only)
18 10 0.0125 0.0091

0.2992 0.2914

0.419 0.394

0.050 0.016 0.020 0.013

3 0.4625 0.4469

0.050
BSC

0 TO 8

0.0926 0.1043 0.0040 MIN.


Dwg. MA-008-18A in

Dimensions in Millimeters (controlling dimensions)


18 10 0.32 0.23

7.60 7.40

10.65 10.00

1.27 0.40 0.51 0.33

3 11.75 11.35

1.27
BSC

0 TO 8

2.65 2.35 0.10 MIN.


Dwg. MA-008-18A mm

NOTES:1. Exact body and lead configuration at vendors option within limits shown. 2. Lead spacing tolerance is non-cumulative.

www.allegromicro.com

2803 THRU 2824 HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON ARRAYS

The products described here are manufactured under one or more U.S. patents or U.S. patents pending. Allegro MicroSystems, Inc. reserves the right to make, from time to time, such departures from the detail specifications as may be required to permit improvements in the performance, reliability, or manufacturability of its products. Before placing an order, the user is cautioned to verify that the information being relied upon is current. Allegro products are not authorized for use as critical components in life-support devices or systems without express written approval. The information included herein is believed to be accurate and reliable. However, Allegro MicroSystems, Inc. assumes no responsibility for its use; nor for any infringement of patents or other rights of third parties which may result from its use.

115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 (508) 853-5000

Anda mungkin juga menyukai