Anda di halaman 1dari 5

Page 1 of 5

BANGLADESH UNIVERSITY OF ENGINEERING AND TECHNOLOGY, DHAKA -1000 DEPARTMENT OF CIVIL ENGINEERING
Com m itted to Quality A ssurance for Better Bangladesh

APPROVED RATES FOR TESTING OF MATERIALS AND SERVICES


Rates include VAT (15%), Univ. (30%) & Dept. (2%) overheads and effective from 1st July 2013
Department of Civil Engineering reserves the right to change the rates at any time without any prior notice

Contact person: Prof. Dr. Md. Abdur Rouf; Room No 408; Mobile: 01819 557964 PABX Nos: 966 5650-56, 861 6833-38, 861 4640-44, 861 8344-49, Ext. 7226; Fax - 9665639; Web: www.buet.ac.bd/ce

BRTC Office Time : Sat to Wed => 9:00 am - 5:00 pm & Thu => 9:00 am - 1:00 pm
Sl. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Name of Tests AGGREGATES Sieve analysis (CA) / Gradation / FM / Particle Size Sieve analysis (Ballast) Sieve analysis (FA) / FM Wash sieve / Material Finer than #200 sieve / Silt Content Aggregate crushing value(ACV) / Compressive Strength Aggregate Impact value (AIV) Ten percent fine value (TFV) Angularity number (Including sp. gr.) Elongation Index (EI) / Shape Test Flakiness Index (FI) L.A. Abrasion of CA L.A. Abrasion of Ballast (500/= for L.C.) Unit weight of aggregate (CA) Unit weight of aggregate (FA) Soundness with Na2SO4 (2000/= for chem.) Test Rate (Tk.)
2,700 3,200 1,600 2,200 3,200 2,700 5,400 3,200 2,700 3,200 3,800 3,800+500 2,200 1,600 7,700+2,000

Sl. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29

Name of Test BITUMEN Specific gravity / Sp. Gr. / Density Penetration / Grading Loss-on-heating Flash & Fire points Solubility (100/= for Chem.) Ductility 100/= for Chem.) Softening point (R&B) (100/= for Chem.) Thin Film Oven Float test Foaming Test Spot Test Viscocity, Saybolt Furol (S.F.) Viscocity (Kinematic) Viscocity (Absolute / Dynamic) Ash Content / Inorganic Matter Any test on residue from Loss-on-heating test Any test on residue fromThin Film Oven test
Coating & Stripping test with/without Anti-Stripping Agent/Dose

Test Rate (Tk.)


2,300 2,300 2,300 2,300 2,200+100 2,200+100 2,200+100 2,800 2,300 2,300 2,300 4,300 5,900 8,900 4,300 3,900 4,500 3,200 39,400 2,700 6,600+4,000 5,200 3,300 1600 3,000

Soundness with Mg2SO4 (4000/= for chem.) 8,300+4,000 Absorption and Specific Gravity / Density (for Ballast) 3,100 Clay lump & friable particles 2,500 Organic impurities / Salt content / Sulphate content / Salinity 1,900 Coal & lignite (400/= for chemicals) 2,100+400 Mica Content 7,500 Effect of organic impurities (1200/= for chem) 9,200+1,200 Percentage of uncrushed particle (fractured face) 4,000 Foreign material content / Deleterious substance 9,900 Bulking of sand 4,300 Void Ratio / Porosity / Moh. Hardness (500/= for chem.) 3,200+500 Co-efficient of Sand (d10) 2,800 28,900 CBR of Base or Sub-base material Standard Proctor test of aggregate (MDD) 11,300 Modified Proctor or Vibrating Hammer 17,300 BRICKS (Bricks needed for ASTM = 5 nos., BS = 10 nos.)

Ashaplt Concrete Mix Design (Marshall) Particle Charge Test of Bitumen Emulsion PAVEMENT Bitumen content (4000/= for Chemical) Water Content Theoritical Max. Sp. Gr. Density Marshall Stability and Flow Test Distillation In-Situ per core cutting Job Mix Formula & Marshall Test TSR Test R.C.C PIPES

7,100 5400 + ** 77,000


36,500

1 2 3 4 5 6 7

Absorption (ASTM / BS Standard) Crushing strength(ASTM / BS Stand; 300/400/= capping mat.) Size & shape (ASTM / BS Standard) Unit Weight (ASTM / BS Standard); 200/300 for LC Unit Wt. & Absorption (ASTM / BS Stand); 200/300 for LC Efflorescence (needed 10 additional bricks)

1500 / 2900 2800 / 5200 2300 / 2300 2400 / 4600 3600 / 6600 2,800

1 2 3 4 5

Pipes (dia upto 600mm) Pipes (dia above 600mm and upto 900mm) Pipes (dia above 900mm and upto 1200mm) Pipes (dia above 1200mm and upto 1524mm) In-situ pipe testing

5,400 5,900 7,600 9,700

6500 + *
5,400 5,900 2,500 12,400

HOLLOW / SPECIAL BRICK BLOCKS / KERB (set of 3 nos.) 8 Comp. strength of Hollow bricks, Paving / Concrete blocks etc. 9 Compressive strength of Road Kerb Stone 10 Absorption 11 Unit weight 12 Comp. strength of Hollow bricks, Paving block incl. unit wt.
2,700 3,300 1,600 2,200

Manhole Covers ^ 1 Load & wt. test on manhole covers (<18 inch or 450 mm Dia) 2 Load & wt. test on manhole covers (>18 inch or 450 mm Dia) Miscellaneous 1 Initail Rate of Absorption/Suction for Brick 2 Alkali-Silica Reactivity for Stone/Sand

Note: ^ Pipe specimens & Manhole covers have to be taken away by 4,500 the Client, immediately after the test is performed.

Notes: [* Field visit fees; inside Dhaka = Tk. 10,000; Greater Dhaka = Tk. 16,000; Adjacent Dhaka= Tk.21,000; Remote Districts = Tk. 30,000; Remote areas = Tk.40,000] [** Field visit fee + Tk. 2000 if Core Cutter/Scanner/Load Cell etc. are needed.] [* & ** Transport, local hospitalities, accommodation (in case of overnight stay) etc. are to be provided by the client]

Page 2 of 5 Sl. No. 1 2 3 4 5 6 7 8 Test Rate (Tk.) 1,600 2,900 2,500 3,000 5,100+300 2,500 6,300 8,700 14,600 Sl. No. 1 2 3 4 5 6 7
Test Rate (Tk.) 6,600+600 2,700 2,200 3,500 2,200 3,200 500 21,600+400 27,000+500 1,600 4,300 5,400 1,100 4,300 5,400 5,400 2,200 18,000 2,000+1,200

Name of Tests CEMENT CONCRETE Concrete cylinders (100x200mm), for a set of 3 nos. Concrete cylinders (150x300mm), for a set of 3 nos. Cubes (< 200mm) , for a set of 3 nos. Cubes (200mm - 300mm), for a set of 3 nos. Cubes (>300mm), each core cutting & testing (300/= for fuel) Concrete Spun, for a set of 3 nos. Concrete beam in flexure, for a set of 3 nos. Concrete slab in flexure, for a set of 3 nos. Concrete Mix Designs

Name of Tests CEMENT (ASTM / AASHTO) Comp. strength, 3, 7 & 28 days (600/= Ottowa Sand) Setting time Fineness Setting time (only) Normal Consistency (only) Density / Sp.Gr. Weight of Cement Bag CEMENT (EN Standard)

9 Con. cylinders casting & testing, for a set of 6 nos. 10 Concrete mix design without admixture 11 Concrete mix design using admixture Destructive and NDT Tests 12 13 14 15 16 17 18 Sl. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 In-Situ per core cutting & testing (without scanning) In-Situ per core cutting & testing (with scanning) In-Situ Hammer Test - per spot / location (min. 3 tests) In-Situ Winsor Pin Test - per spot / location (min. for 3 tests) In-Situ Scanning test - per spot / location (for 2 scans)
In-Lab Block/Kerb per core cutting & testing (300/= LC)

8 Comp. strength 2 & 28 days (400/= EN Sand) 9 Comp. strength 2, 7 & 28 days (500/= EN Sand) 46,500 ROD (Miscellaneous) 51,900
4,900+200+** 9,600+400+**

10 Coupler 11 MS Bar above 32 mm 12 13 14 15 16 17 18 19 MS Bar above 50 mm Elongation at 5D as per ISO 6935 Per Set Shafft Rod 40 mm Shafft Rod 50 mm Bult Welded Joint Density Transverse Breaking Load of Rail Shear Test for Rod

4,900+100+*

4,450+50+*
8,700+300+**

In-Lab Supplied Core Testing (Per core) (300/= LC)

5,000+300 1,800+300 Test Rate (Tk.) 4,000 18,700 24,800 2,800 4,300 4,900 5,900 8,000 9,700 237,600 7,300 3,800 9,400 7,300 16,200 10,800 14,000 21,600

Name of Tests CALIBRATION Pressure gauge / Dial Gauge Hydraulic Jack with pressure gauge (Regular) Hydraulic Jack with pressure gauge (Large) + 800 kg Deflection dial Proving ring (< 100 kN ) Proving ring (100 kN to 500 kN ) Proving ring (> 500 kN ) Dynamometer Compression / TensionTesting Machine (with one dial) Calibration of Concrete Mix Batching Plant Balance and Weight Electronic Balance upto 20kg / Platform Scale / Balance CA measuring potable fara / Measuring cub Schmidt Hammer (Rebound) Weight < 2kg / Load Cell Weight Box Balance upto 300kg

35 Test on Admixture (Mineral) for Cement/Concrete Durability / Soundness 1 Expansion of Mortar ASTM C1038 2 Sulfate Resistance ASTM C1012 Sl. No.

ask at the counter

6,300 11,300+1,100

17 Balance above 300kg to 1000kg 18 Balance above 1000kg 19 20 21 22 23 26 27 28 29 30 31 32 33 Cement Testing Apparatus Mixture Machine (Mortar cube & setting) Blaine Apparatus/Vibration Machine/Joilting Table Vicat Apparatus Cement Autoclave Machine Cylinder Mould Calibration Survey Equipment Theodolite Level Total Station Miscellaneous Equipment / Devices Vernear Scale/ Micro meter Steel Scale Thermometer Sieve Tacheometer Outside Laboratory / In-situ Calibration

Name of Tests ROD (set of 3 nos.)

Test Rate (Tk.)

7,300 Any grade of Rebar 1,900 7,300 1 Tension test incl. wt. & elongation (upto 25mm) Tension test incl. wt. & elongation (above 25mm & upto 32mm) 2,800 5,700 2 900 7,300 3 Bend test (upto 25mm) 1,000 2,200 4 Bend test (above 25mm) 5 Rebend test (upto 25mm) 1,300 1,400 11,800 6 Rebend test (above 25mm) 6,500 9,100 7 Stress-strain curves (Mod.of Elasticity); Strand 7,200/= 2,500 32,400 8 Deformation Measurement Bolt, Angle & Plate (set of 3 nos.) 2,300 1,600 9 Bolt, Tension test upto 30mm 3,400+500 1,600 10 Bolt, Tension test above 30mm (LC 500/=) 1,800 2,500 11 Bolt, Shear test upto 20mm 12 Bolt, Shear test above 20mm (LC 500/=) 1,900+500 2,800 2,300+900 11,800 13 Angle / Plate, Tension test upto 16mm (LC 900/=) 14 Angle / Plate, Tension test above 16mm (LC 2000/=) 2,500+2,000 9700 + ** 12,400

34 Compression / TensionTesting Machine (with one dial) 35 Protable Weighing Bridge

Notes: [* Field visit fees; inside Dhaka = Tk. 10,000; Greater Dhaka = Tk. 16,000; Adjacent Dhaka= Tk.21,000; Remote Districts = Tk. 30,000; Remote areas = Tk.40,000] [** Field visit fee + Tk. 2000 if Core Cutter/Scanner/Load Cell etc. are needed.] [* & ** Transport, local hospitalities, accommodation (in case of overnight stay) etc. are to be provided by the client]

Page 3 of 5 Sl. Name of SOIL Tests 3,000+900 No. H.T. Wire, Tension test; for a set of 3 nos. 6,000 Index & Physical properties Strand / Cable, Tension test, for a set of 3 nos. 10,800 1 Sp. gr. Fibre Glass Stainers / Pipes, Tension test, for a set of 3 nos. 3,600 2 Unit weight (wet & dry) Fibre Glass, Compression test, for 1 sample 1,600 3 Void ratio (Sp. Gr. & Unit Wt.) 1,400+500 Hardness test (Rockwell), for a set of 3 nos. (LC 500/=) 4 Moisture content Impact test, for a set of 3 nos. (LC 1000/=) 1,800+1,000 5 Linear Shrinkage Spring test, for per specimen 2,400 6 Skrinkage limit Bond / Weld Test or Rop lapping test 3,800 7 Liquid limit and Plastic limit 5,800+1,000 8 Sheet Pile, Wt. per m, Dim.; (LC 1000/=) Grain size analysis by wash sieving Sheet Pile, Section Modulus / Moment of Inertia.; (LC 2000/=) 9,700+2,000 9 Hydrometer, sieve analysis & sp. gr. Aluminium Column, Compression test 6,300+1,000 10 Organic matter content 4,800+3,000 11 MS Box Welding, Compressive Strength; (LC 3000/=) Loss on ingnition 9,700 12 Scaffolding / Steel Props / Jog Sand equivalent test 5,800 Compaction and density tests Dog Spike 4,200+800 13 Steel Sleeper; (LC 800/=) Max. and Min. density of cohesionless soil 83,800+8,000 14 Standard Proctor Compaction test Prestressing Anchorage System; (LC 5000/=) Timber Test Modified Proctor Compaction test 15 18 Timber , Compression test, for 1 sample (LC 1000/=) 9,800+1,000 Permeability and seepage characteristics 19 Timber, Flexure test, for 1 sample (LC 1000/=) 5,500+1,000 16 Permeability of cohesieve soil by 1-dimensional consolidn 3,300+1,000 17 20 Moisture Content Permeability of cohesionless soil (falling head) Permeability of cohesionless soil (constant head) 21 Hardness 6,600+1,000 18 Consolidation and swelling characteristics TILES (set of 5 nos.) 1 Size & shape / Warpe 1,600 19 One dimensional consolidation (e - log p, Cc,Cr,Cv) 2 Absorption (with flexural needs additional 5 nos.) 1,600 20 Swelling Index / Swelling Pressure 3 Flexural / Modulus of Rupture 2,200 Strength and deformation characteristics RUBBER / PLASTIC / PVC MATERIALS 21 Unconfined compression test 1 Tension, for a set of 5 samples 2,600 22 Lab. California Bearing Ratio (CBR) of soils 2 Hardness, for 1 sample 1,600 Direct shear tests 3 Flexural, for a set of 5 samples 3,100 23 Consolidated Drained test 4 Compression, for 1 sample 3,100 24 Consolidated quick test 5 Compression stiffness, for 1 sample 4,300 25 Unconsolidated quick test 6 Water Stopper - Tension, Dim., Elongation; LC 500/= 4,000+500 Triaxial shear tests 7 Water Stopper - Sp. Gr. / Hardness 3,800 26 Consolidated Drained compression test 27 Con. undrained compression test with pore pressure Soil Boring (Including relevant tests & report) 28 Con. undrained compression test without pore pressure Soil Boring per bore 29 Uncon. undrained compression test without pore press Within Dhaka City - depth upto 60'-0" 59,400 30 Con. undrained extension test without pore pressure Within Dhaka City - depth upto 100'-0" Consultation 31 Cyclic Triaxial Test Outside Dhaka City - depth upto 60'-0" with teacher 32 Bentonite Geotechnical Tests (Field) Outside Dhaka City - depth upto 100'-0" is required (Notes: Minimum 3 borings for a particular site; 33 Field CBR (6 spots+2 Proctor/max-min density + 2 sieve/Hydrometer) Guidelines : upto 3 katha - 3 nos; 3 - 5 katha - 5 nos; 6 - 10 katha - 8 nos) Filed CBR per spot with field density (in addition Proctor/max-min 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
Hooks/Anchore Bolt, Tension test ; for a set of 3 no.(LC 900/=)
Field density per spots (In addition proctor/max-min density and sieve/Hydrometer tests are needed to be done - please consult wth 36 respective Teacher) Min total fees: within Dhaka City - Tk.75,000/** and outside Dhaka City - Tk.1,00,000/-**

ROD (Miscellaneous)

Test Rate (Tk.) 1,700 1600 2,700 800 1,600 1,300 2,700 2,200 4,300 2,800 2,400 3,600 4,900 5,400 6,500 11,300 5,400 10,800 11,300 11,300 3,200 13,200 6,500 5,400 4,300 27,000 21,600 21,600 10,800 21,600
Pl consult teacher

11,200 54,000 + ** 6,500+ **

34
5,400+**

density and sieve/Hydrometer tests are needed to be done - please consult wth respective Teacher) Min total fees: within Dhaka City Tk.50,000/-** & outside Dhaka City - Tk.75,000/-**

1 2 3 4 5 6

Field density(8 spots+2 Proctor/max-min density+2 sieve/Hydrometer GEOTEXTILES / BAGS (for a set of 3 no. samples) Apparent/Effective Opening Size (AOS/EOS)/Pore Size (3 3,600 9 Trapozoidal Tearing Strength specimen) Burst Test Index 2,700 10 Unit Weight / Mass (3 specimen) Index Puncture Resistance or CBR Puncture (10 specimen) 2,700 11 Ver. Permeability Under 2 kN/m2 and 200 kN/m2 Cone Penetration Test 2,700 12 Vertical Permeability Under 2 kN/m2 Pressure Grab Tensile strength & elongation (5 specimen x 2-dir) 3,600 13 Water Permeability by Permittivity Hor. Water Permeability Under 2kN/m2 pressure 7,600 14 Horizontal Water Permeability Test 35 3,600 1,100 15 Strip/Wide-Width Tensile strength & elong) (5 specimen x 2-dir) 1 Grab Test (Long. & X-dir. & Top & Bot. seam) of Geo Bag
Test for rubber durability-deterioration in an air oven, ASTM D573 (set of 3)

54,000 + **

3,600 1,700 7,000 4,300 3,600 7,600+300 4,300 12,300

7 Seam Strength (6 specimen) 8 Thickness (10 specimen)


Vulcanized rubber and thermoplastic elastomer in tension and elongation at break, ASTM D412 (set of 3)

ELASTOMERIC BEARINGS 1 2 3,900+600 4,400 8,900 5,800+600 5,100+600 1,900 1,900 8 9 3,800 3,100 1,900 3,100 3,800 4,500+3,200

Short duration compression test on plain and steel laminated elastomeric bearings for bridges, ASTM D4014 (set of 1) Long duration compression test on plain and steel laminated 3 elastomeric bearings for bridges, ASTM D4014 (set of 1)

4 Determination of shear modulus, ASTM D4014 (set of 3) 5 Test for compression set, ASTM D395 (set of 4) 6 Dimension Test 7 Determination of durometer hardness, ASTM D2240 (set of 1)

Test for determining the adhesion on rigid substrates, ASTM D429 (set of 1) Dimensional test (external and internal) giving number & 10 thickness of steel plates, elastomer parallelism, 11 Ash content 12 Heat Resistence test at 100 C for 72 hours 13 After ageing 14

Notes: [* Field visit fees; inside Dhaka = Tk. 10,000; Greater Dhaka = Tk. 16,000; Adjacent Dhaka= Tk.21,000; Remote Districts = Tk. 30,000; Remote areas = Tk.40,000] [** Field visit fee + Tk. 2000 if Core Cutter/Scanner/Load Cell etc. are needed.] [* & ** Transport, local hospitalities, accommodation (in case of overnight stay) etc. are to be provided by the client]

Page 4 of 5 Sl. No. Name of Tests WATER TESTS Routine Drinking Water Parameters (Package) 1 2 3 4 5 6 7 8 9 10 11 1 2 3 4 5 6 7 pH Color (True or Apparent) Turbidity Total Hardness Chloride (Cl) Total Dissolved Solids (TDS) Manganese (Mn) Arsenic (As) Total Iron (Fe) -Phenanthroline Method Total Coliform(TC)/Thermotolerent Coliform (TTC) Fecal Coliform (FC) Environmental Quality of Soil, Sludge and Solids pH Electrical Conductivity Organic Matter (Dry Combustion Method) Organic Matter (Wet Combustion Method) Water Soluble Cl / PO4 / SO4 (each) Metal Analysis Following T. Extraction and / or TCLP: Total Extraction Charges (each sample) Toxic Characteristics Leaching Procedure (TCLP) Ca/Cd/Co/Cr/Cu/Fe/Mg/Mn/Ni/Pb/Zn - using FLAAS + Aluminum (Al) - using GFAAS Arsenic (As) - using GFAAS Mercury (Hg) - Cold Vapor Method Selenium (Se) - using GFAAS / Ba Na or K (each) - using FLAAS Mixed Liquor Suspended Solids (MLSS) Mixed Liquor Volatile Solids (MLVSS) Pb or Cd release from Tableware (each) Air Quality Monitoring ++ Parameters (upon discussion) CO SOx NOx CH4 SPM PM10 PM2.5 Test Rate (Tk.) Sl. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 Name of Tests Miscellaneous Water Quality Parameters pH Color (True or Apparent) Color Scanning at Specific Wavelength/UV-VISRange Turbidity Carbon-di-Oxide (CO2) / Acidity P-Alkalinity/ M-Alkalinity/T-Alkalinity Carbonate (CO3) or Bi-carbonate (HCO3) + pH Total Hardness Ca - Hardness Mg - Hardness Chloride (Cl) Fluoride (F) Ammonia-Nitrogen (NH3 - N) Nitrate - Nitrogen (NO3 - N) Nitrite - Nitrogen (NO2 - N) Total Nitrogen (TN) Total Kjeldahl Nitrogen (TKN) / Organic Nitrogen Chlorine Content - Total Cl2 Chlorine Content - Free Cl2 Iodine Content Bromine Content Break Point Chlorination Total Solids (TS)
Total Suspended Solids (TSS)/Insoluble Solids/(TSS+TDS+TS) 100+200 100+100 900+200 150+150 100+100 150+150 300+200 600+200 1,900+800 1,900+800 550+250 400+100 600+400 350+250 350+250 3,900+1,500 11,000+3,000 350+250 350+250 300+200 300+200 6,400+1,200 800+100 1,400+400 750+150 600+400 1,700+1,000 250+250 2,700+500 600+200 600+200 400+200 1,800+300 1,350+350 1,200+600 1,200+600 250+250 1,500+1,200 1,100+400 3,300+500 1,000+500 2,800+1,000 3,100+1,200 2,200+800 1,300+400 1,100+400 1,500+1,000 650+150 900+400 1,500+600 700+400 700+400 2,800+1,000 2,800+1,000 2,800+1,000 8,300+2,500

Test Rate (Tk.)

200+200 550+250 1,800+400 2,100+500 1,700+700 1,300+500 2,900+2,500 1,100+400 3,300+500 1,000+500 3,100+1,200 2,200+800 1,300+400 3,300+600 3,300+600 1,200+600

6,200 + 2,200 = 8,400

9 10 11

1 2 3 4 5 6 7 8 Engine Exhaust Monitoring (CO, NOX, HC, CO2, O2) - Min.** 9 Total Dust in Air (Method AS/NZS 3580.10.1:2003) (each) Noise Monitoring 1 Minimum Fee * Sample Collection Charges +++ 1 Sampling for Bacteriological Analysis ** 2 Sampling for Physical and Chemical Analysis ** Tubewell Design 1 Tubewell Design (depth up to 600'), incl. 8 nos. sand test ^^ 2 Tubewell Design (depth above 600'), Incl. 11 nos. sand test ^^
For complete design, fees would be Tk. 14,000/= instead of 10,800; ^^ For Inverted Tubewell design; Extra fees = Tk. 2,200/

For the rate please ask at the counter

3,200+800

16,600+5,000

6500 + ** 6500 + **

11,900+9,300
11,900+13,700

Total Dissolved Solids (TDS) Silica Content (SiO2) Colloidal Silica Electrical Conductivity (EC) Total Phosphorous (TP) Orthophosphate (PO4) Hydrogen Sulphide (H2S) / Odor Sulphate (SO4) Organic Matter *** Biochemical oxygen Demand (BOD) - 5 day Chemical Oxygen Demand (COD) KMnO4 Value Dissolved Oxygen (DO) Boron (B) Manganese (Mn): UV - VIS Aluminum (Al) - using GFAAS Arsenic (As) - using GFAAS Cyanide (Cn) Mercury(Hg)-Cold Vapor Method (Mini. 30 days required) Selenium (Se) - using GFAAS / Ba Na or K (each) - using FLAAS Ca/Cd/Co/Cr/Cu/Fe/Mg/Mn/Ni/Pb/Zn - using FLAAS Nickel (Ni) and/or Cobalt (Co) (for Drinking Water) Total Iron (Fe) - Phenanthroline Method Ferrous Iron (Fe2+) Ferric Iron (Fe3+) Total Coliform(TC)/Thermotolerent Coliform (TTC) Fecal Coliform (FC) E. Coli

54 Magnesium Density 55 Sodium Absorption Ratio (SAR) 56 Algae / Chlorophyll_a

Notes : + Plus Total Extraction Charge = 13,000+500 +++ Sampling charge may vary depending on the area to be sampled ++ Additional fee includes: * Cost depends on the client's requirements Sampling Charge for Air Quality Monitoring (without PM2.5) = 12,600 ** Usual field visit fees apply in addition to above Sampling Charge for Air Quality Monitoring (with PM2.5) = 18,800 *** Only for Solids / Sludge

Notes: [* Field visit fees; inside Dhaka = Tk. 10,000; Greater Dhaka = Tk. 16,000; Adjacent Dhaka= Tk.21,000; Remote Districts = Tk. 30,000; Remote areas = Tk.40,000] [** Field visit fee + Tk. 2000 if Core Cutter/Scanner/Load Cell etc. are needed.] [* & ** Transport, local hospitalities, accommodation (in case of overnight stay) etc. are to be provided by the client]

Page 5 of 5 Sl. No. 1 2 3 4 5 6 Name of Tests GRP Board Sandwich Panel Tensile Strength (5 nos. from each Sample) Tensile Modulus (5 nos. from each Sample) Flexural Strength (127 mm x 12.7 mm x 3.2mm; 5 nos) Flexural Modulus (100 mm x 10 mm x 4mm; 5 nos.) Impact Strength (5 nos. from each Sample) Water Absorption (76.2 mm x 25.4 mm x 6mm; 3 nos.) Test Rate (Tk.)
3,800 9,900 3,800 9,900 3,800 2,500

Sl. No.

Name of Tests Non-Asbestos Fibre-Cement Board

Test Rate (Tk.)

1 Modulus of Rupture (6" X 12")

Consultancy on Pile Load Capacity 1 Test Supervision & Report (per Pile) Consultancy on Pile Integrity

72000 + **

Per Pile (see conditions a,b,c) (a) Minimum fees for integrity tests in each visit (within Dhaka City-Tk.50,000/-** , outside Dhaka City-Tk.75,000**) 1 1900 + ** (b) Integrity tests be done on all piles for a structure (c) Pile load test be done on at least 1% of piles selected on the basis of integrity results

3 4 5 6 7 8 9

2 nos. Parallel to Fibre Lay from Same Sheet 5,200+800 2 nos. Parpendicular to Fibre Lay from Same Sheet Modulus of Elasticity (6" X 12") 2 nos. Parallel to Fibre Lay from Same Sheet 10,200+800 2 nos. Parpendicular to Fibre Lay from Same Sheet 1,900 Density (from MOR Test) 2,500 Size & Shape (5 nos.) 2,000+600 Water Absorption (4" X 4"; 3 nos. from Per Sheet) 2,500 Moisture Content (from MOR Test) Water Tightness (24" X 20"; 3 nos. One from each Sheet) 7,700+600 1,000 pH Value (from MOR Test) Heat & Rain Wall Structures (5' X 4'; 2 nos.; One from 25,100 each Sheet)

Various Consultancy Services


1 Land Survey (Plannimetric/Topographic/Contour) by Total Station and GPS 2 Cost Estimation of Civil Structures 3 Asset Evaluation of Civil Structures/Industries/Properties 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 9 10 11 12

Design of Building, Bridges, Airport, Offshore Structures, Drainage Structures etc. Structural Evaluation of Old Civil Structures without Drawings/Records Quality Assurance (QA) of Civil Structures / Flat Certification on Structural Stability of Civil Structures Design Checking of various Concrete and Steel Structures Investigation of Civil Engineering Projects Assessment of Safety for old Structures Strengthening of Existing Structures Environmental Site Assessment (e.g. for LPG plants, Power plants) Environmental Impact Assessment (EIA) of Civil Engineering Projects Environmental Monitoring of Civil Engineering Projects Design of Solid Waste Disposal Systems Design of Water and Wastewater Treatment Systems Design of Iron Removal Plants Plumbing and Sewer Systems Design Solid, Hazardous and Industrial Waste Management and Pollution Control Design of Water Supply System Training on Water Quality, Water Supply and Sanitation Design and Analysis of Shallow and Deep Foundations Design and Analysis of Embankments Design and Analysis of Earth Retaining Structures Planning of Soil Investigation Programs Planning and Design of Soil Improvement Schemes Seismic Design of Foundation Seismic Hazard Analysis Microzonation Maps Transportation Impact Assessment (TIA) of Civil Engineering Projects Traffic Studies (Volume, O-D, Speed, Delay, Parking etc.) Traffic Forecasting Geometric and Structural Design of Pavements, Parking Lots etc. Planning and Design of Inland Container Terminal/Depot (ICT / ICD) Planning and Design of Airport Terminal Design of Runway Pavement Design of Road/Highways/Bridge/Culverts Planning and Design of Flyover / Underpass / Interchange Road Accident Investigation/Safety Measure/Road Safety Auditing Development of Transportation Model Training on Traffic Studies, Traffic Management, Transportation Planning, Traffic Safety

Notes: [* Field visit fees; inside Dhaka = Tk. 10,000; Greater Dhaka = Tk. 16,000; Adjacent Dhaka= Tk.21,000; Remote Districts = Tk. 30,000; Remote areas = Tk.40,000] [** Field visit fee + Tk. 2000 if Core Cutter/Scanner/Load Cell etc. are needed.] [* & ** Transport, local hospitalities, accommodation (in case of overnight stay) etc. are to be provided by the client]

Anda mungkin juga menyukai