Jupiter
Jupiter CAB
Jupiter Minicab
Jupiter Duplex
APPLICATIONS The process of water softening (removal of total hardness - TH) by the means of ion-exchange resin is the way to remove salts of calcium and magnesium that may form calcareous encrustations. The installation of a softener is recommended to avoid encrustations into pipelines and on domestic and industrial water heating appliances, to save energy and thermal efficiency. Jupiter softeners can be provided on request with manual by-pass to mix the softened water with raw water to comply with any required level of residual total hardness. Domestic use: anti-scale protection of pipes, taps, boilers, heating systems, washing machines, and other installations. Technical use: all applications when removal of total hardness is required. Remark - Use a pre-filter to protect the softener; use a polyphosphate dosing system downstream the softener to avoid any corrosive action due to softened water.
SPECIFICATIONS Non-toxic materials, suitable for drinking water. Control-valve: NORYL. Tank: glass-fibre reinforced polyethylene. Brine tank and cabinet: polyethylene. Treating material: strong cationic ion-exchange resin (Na cycle). > Regeneration: exhausted resin is automatically regenerated by a saturated solution of NaCl (brine). Remark material for regenarion (NaCl) not provided with the softener. WORKING CONDITIONS Max working pressure ___________________________6 BAR Min working pressure _____________________________2 BAR Max working temperature _________________________50C Max concentration Fe ______________________________0,1 ppm Max concentration free Cl ____________________________0,5 ppm
accessories
VARIANTS available
FT softeners with valve Fleck with timer. FV softeners with volumetric valve Fleck.
TH Control Kit
manual by-pass
REFILL
Strong cationic resin, package of 25 litres.
D A
softeners Jupiter
JUPITER ATL - ATM softeners with timer control valve Jupiter 10 ATL 255 Jupiter 15 ATL 255 Jupiter 30 ATL 255 Jupiter 50 ATL 255 Jupiter 70 ATL 255 Jupiter 100 ATL 268 Jupiter 120 ATL 268 Jupiter 150 ATM Jupiter 175 ATM Jupiter 200 ATM Jupiter 230 ATM Jupiter 270 ATM Jupiter 300 ATM JUPITER CAB ATL softeners with timer control valve Jupiter CAB 10 ATL Jupiter CAB 15 ATL Jupiter CAB 30 ATL JUPITER AVL - AVM softeners with volumetric control valve Jupiter 10 AVL 255 Jupiter 15 AVL 255 Jupiter 30 AVL 255 Jupiter 50 AVL 255 Jupiter 70 AVL 255 Jupiter 100 AVL 268 Jupiter 120 AVL 268 Jupiter 150 AVM Jupiter 175 AVM Jupiter 200 AVM Jupiter 230 AVM Jupiter 270 AVM Jupiter 300 AVM 3/4 3/4 3/4 1 1 1 1 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 in/out threads 3/4 3/4 3/4 10 15 30 50 70 100 120 150 175 200 230 270 300
range of products
cycle capacity m3/F 60 90 180 300 420 600 720 900 1050 1200 1380 1620 1800 cycle capacity m3/F 60 90 180 cycle capacity m3/F 60 90 180 300 420 600 720 900 1050 1200 1380 1620 1800 cycle capacity m3/F 25 60 90 180 cycle capacity m3/F 240 450 450 600 600 750 750 900 900 1200 1200 1800
A C
tank volume average brine brine-litres consumption kg 85 85 85 140 140 190 190 340 340 460 460 670 670 1,4 2,5 4,3 7,3 11,3 15 19 30 35 40 46 54 58
mm A 665 1096 1096 1580 1580 1850 1850 2000 2000 2350 2350 2460 2460 B 212 189 265 265 300 363 413 486 486 550 550 626 626 mm B 320 320 320 mm A 665 1056 1096 1580 1580 1850 1850 2000 2000 2350 2350 2460 2460 B 212 189 265 265 300 363 413 486 486 550 550 626 626 mm B 530 320 320 320 mm A 1580 1580 1580 1850 1850 1850 1850 2000 2000 2350 2350 2460 B 265 300 300 363 363 413 413 486 486 550 550 626 C 850 850 850 1080 1080 1080 1080 1150 1150 1150 1150 1150 D 600 600 600 600 600 600 600 635 635 742 742 885 C 790 790 790 850 850 1080 1080 1150 1150 1150 1150 1150 1150 D 380 380 380 600 600 600 600 635 635 742 742 885 885 C 790 790 790 850 850 1080 1080 1150 1150 1150 1150 1150 1150 D 380 380 380 600 600 600 600 635 635 742 742 885 885
recommended max flow rate l/h flow rate l/h 800 900 1900 2100 2500 3700 4100 8000 8000 11000 11000 12800 12800 1000 1100 2300 2500 3200 4900 6500 10400 10400 14000 14000 16000 16000
recommended max flow rate l/h flow rate l/h 800 900 1900 1000 1100 2300
in/out resin volume threads litres* 3/4 3/4 3/4 1 1 1 1 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 in/out threads 3/4 3/4 3/4 3/4 10 15 30 50 70 100 120 150 175 200 230 270 300
tank volume average brine brine- litres consumption kg 85 85 85 140 140 190 190 340 340 460 460 670 670 1,4 2,5 4,3 7,3 11,3 15 19 30 35 40 46 54 58
recommended max flow rate l/h flow rate l/h 800 900 1900 2100 2500 3700 4100 8000 8000 11000 11000 12800 12800 1000 1100 2300 2500 3200 4900 6500 10400 10400 14000 14000 16000 16000
JUPITER CAB AVL softeners with volumetric control valve Jupiter Minicab 5 AVL Jupiter CAB 10 AVL Jupiter CAB 15 AVL Jupiter CAB 30 AVL JUPITER DUPLEX AV - AVM duplex softeners with 2 volumetric control valve Jupiter Duplex 40 AV 255 Jupiter Duplex 75 AV 255 Jupiter Duplex 75 AV 278 Jupiter Duplex 100 AV 278 Jupiter Duplex 100 AVM Jupiter Duplex 125 AV 278 Jupiter Duplex 125 AVM Jupiter Duplex 150 AV 278 Jupiter Duplex 150 AVM Jupiter Duplex 200 AV 278 Jupiter Duplex 200 AVM Jupiter Duplex 300 AVM
recommended max flow rate l/h flow rate l/h 800 800 900 1900 1000 1000 1100 2300
in/out resin volume threads litres* 1 1 1 1 2 1 2 1 2 1 2 2 40 75 75 100 100 125 125 150 150 200 200 300
tank volume average brine brine- litres consumption kg 2 x 85 2 x 140 2 x 140 2 x 190 2 x 190 2 x 190 2 x 190 2 x 340 2 x 340 2 x 460 2 x 460 2 x 670 5,8 12 12 15 15 20 20 30 30 40 40 58
recommended max flow rate l/h flow rate l/h 2000 2600 2600 3700 3700 4200 4200 8000 8000 11000 11000 12800 2400 3400 3400 4900 4900 6800 6800 10400 10400 14000 14000 16000
Mars GS
MARS PRL
IRON-REMOVERS WITH PIROLUSITE
Treating material: PYROLUSITE, high stability oxidizing medium: requires less oxigen concentration (< 15%) than other oxidizing media, not affected by the presence of hydrogen sulphide. > Regeneration: no regeneration medium required, the valve automathically back-wash the oxidizing medium.
MARS BRM
IRON-REMOVERS WITH BIRM
Treating material: BIRM, high stability oxidizing medium: requires oxigen concentration (> 15%), affected by the presence of hydrogen sulphide. > Regeneration: no regeneration medium required, the valve automathically back-wash the oxidizing medium.
MARS GS
IRON-REMOVERS WITH Manganese GREEN-SAND
Treating material: manganese GREEN-SAND, high stability oxidizing medium: requires oxigen concentration (> 15%), affected by the presence of hydrogen sulphide. > Regeneration: require potassium permanganate as regeneration medium, the valve automathically regenerate the oxidizing medium. Remark regeneration medium (potassium permanganate) not provided.
VARIANTS available
FT Iron-removers with
valve Fleck with timer.
REFILL
BIRM package of 28,3 litres. Pyrolusite package of 12,5 litres. Manganese GREEN-SAND package of 28,3 litres.
A D
range of products
PYROLUSITE volume litres* 25 50 75 100 125 150 200 200 300 PYROLUSITE volume litres* 25 50 75 100 125 150 200 200 300 BIRM volume litres* 25 50 75 100 125 150 200 200 300 BIRM volume litres* 25 50 75 100 125 150 200 200 300 mm A 1320 1580 1580 1850 1850 2000 2350 2350 2460 mm A 1320 1580 1580 1850 1850 2000 2350 2350 2460 mm A 1320 1580 1580 1850 1850 2000 2350 2350 2460 mm A 1320 1580 1580 1850 1850 2000 2350 2350 2460 B 205 265 330 363 413 486 550 550 626 B 205 265 330 363 413 486 550 550 626 B 205 265 330 363 413 486 550 550 626 B 205 265 330 363 413 486 550 550 626
recommended flow rate l/h 500 800 1300 1500 2000 2500 3400 3400 3400 recommended flow rate l/h 500 800 1300 1500 2000 2500 3400 3400 3400 recommended flow rate l/h 500 800 1300 1500 2000 2500 3400 3400 3400 recommended flow rate l/h 500 800 1300 1500 2000 2500 3400 3400 3400
max flow rate l/h 750 1200 1900 2200 2900 3600 5000 5000 6500 max flow rate l/h 750 1200 1900 2200 2900 3600 5000 5000 6500 max flow rate l/h 750 1200 1900 2200 2900 3600 5000 5000 6500 max flow rate l/h 750 1200 1900 2200 2900 3600 5000 5000 6500
mm A 1320 1580 1580 1850 1850 B 205 265 330 363 413 C 420 420 420 420 420 D 266 266 266 266 266
chlorine-removers Venus
removal of chlorine and chlorate compounds
APPLICATIONS Chlorine, chlorides and chlorate componds such as pesticides and other toxic componds occasionally found in drinking water are removed by a bed of granular activated carbon (GAC). GAC with its wide porous structure performs the highest absoptive action to ensure the removal of bad tastes, odours and toxic compounds. In addition GAC grants a fine filtration to achieve the highest aesthetical results. Domestic use: removal of bad tastes and odours due to chlorine; removal of toxic compounds. Technical use: anti-chlorine treatment of process water for food industry, chemical, pharmaceutical; pre-treatment for the protection of reverse osmosis membranes. Remark - Use a pre-filter to protect the chlorine-remover; a postfilter is recommended to avoid release of fines into the hydraulic circuit.
SPECIFICATIONS Non-toxic materials, suitable for drinking water. Control-valve: NORYL. Tank: glass-fibre reinforced polyethylene. Treating material: granular activated carbon from coconut shell. > Regeneration: no regeneration medium required, the valve automathically back-wash the GAC. WORKING CONDITIONS Max working pressure ____________________________6 BAR Min working pressure _____________________________2 BAR Max working temperature __________________________50C Max content free Cl _________________________________2 mg/l
Venus
VARIANTS available
FT Chlorine-removers with valve Fleck with timer. FV Chlorine-removers with volumetric valve Fleck.
REFILL
Granular activated carbon, package of 25 kg.
chlorine-removers Venus
VENUS ATL - ATM chlorine-removers with timer control valve Venus 25 ATL 263 Venus 50 ATL 263 Venus 75 ATL 263 Venus 100 ATL 263 Venus 125 ATL 263 Venus 150 ATL 263 Venus 200 ATL 263 Venus 200 ATM Venus 300 ATM in/out threads 1 1 1 1 1 1 1 1 1/2 1 1/2
range of products
carbon volume litres* 25 50 75 100 125 150 200 200 300 mm A 1320 1580 1580 1850 1850 2000 2350 2350 2460 B 205 265 330 363 413 486 550 550 626 nominal flow rate l/h 500 800 1400 1600 2100 2600 3600 3600 4700 max flow rate l/h 700 1100 1800 2100 2800 3500 4700 4700 6200
VENUS AVL - AVM chlorine-removers with volumetric control valve Venus 25 AVL 263 Venus 50 AVL 263 Venus 75 AVL 263 Venus 100 AVL 263 Venus 125 AVL 263 Venus 150 AVL 263 Venus 200 AVL 263 Venus 200 AVM Venus 300 AVM
mm A 1320 1580 1580 1850 1850 2000 2350 2350 2460 B 205 265 330 363 413 486 550 550 626
nominal flow rate l/h 500 800 1400 1600 2100 2600 3600 3600 4700
max flow rate l/h 700 1100 1800 2100 2800 3500 4700 4700 6200
SPECIFICATIONS Non-toxic materials, suitable for drinking water. Control-valve: NORYL. Tank: glass-fibre reinforced polyethylene. Treating material: quartzite sand. > Regeneration: no regeneration medium required, the valve automathically back-wash the quartzite sand.
WORKING CONDITIONS Max working pressure ____________________________6 BAR Min working pressure _____________________________2 BAR Max working temperature _________________________50C
Sand
VARIANTS available
FT Filters with valve Fleck
with timer.
REFILL
Quartzite, package of 25 kg.
range of products
quartzite volume litres* 25 50 75 100 125 150 200 200 300 mm A 1320 1580 1580 1850 1850 2000 2350 2350 2460 B 205 265 330 363 413 486 550 550 626 nominal flow rate l/h 500 800 1400 1600 2100 2600 3600 3600 4700 max flow rate l/h 700 1100 1800 2100 2800 3500 4700 4700 6200
Sand AVL - AVM filters with volumetric control valve Sand 25 AVL 263 Sand 50 AVL 263 Sand 75 AVL 263 Sand 100 AVL 263 Sand 125 AVL 263 Sand 150 AVL 263 Sand 200 AVL 263 Sand 200 AVM Sand 300 AVM
mm A 1320 1580 1580 1850 1850 2000 2350 2350 2460 B 205 265 330 363 413 486 550 550 626
nominal flow rate l/h 500 800 1400 1600 2100 2600 3600 3600 4700
max flow rate l/h 700 1100 1800 2100 2800 3500 4700 4700 6200
sterilizers UV
for water sterilization with ultra-violet rays lamp
APPLICATIONS Removal of micro-organisms. Domestic use: production of sterilized water for drinking use. Technical use: production of sterilized water for food industry, chemical, pharmaceutical. Sterilization of zoo-technical appliances (milking machines, troughs, water collection circuits and reservoirs). Remark: Use a fine (minimum 5 micron) pre-filter to ensure the UV unit efficacy. WORKING CONDITIONS Max working pressure _____________________ 9 BAR Min working pressure _______________________ 2 BAR Max working temperature ___________________ 35C Water aspect _______________________________ transparent Max turbidity ______________________________ 0,5 JU (Jackson Units) Max content Fe ____________________________ 0,3 mg/l Max content Mn______________________________ 0,05 mg/l Max total dissolved salinity __________________ 500 mg/l SPECIFICATIONS Non-toxic materials, suitable for drinking water. Treating chamber: bright stainless steel AISI 304. UV lamp radiation energy: > 30000 mWsec/cm2. Electrical functioning: 220 Volt - 50 Hz.
UV 300-600
UV 1200-2800
IN/OUT connections 1/8 male threads 1/2 male threads 3/4 male threads 1 male threads
vessel material stainless steel stainless steel stainless steel stainless steel
treating chamber material stainless steel stainless steel stainless steel stainless steel
control flow rate electrical panel l/h aborption watt no no yes yes 300 600 1200 2800 12 16 30 40
A/C plug with transformer treatment chamber connection cover cap covering holder quartz covering
UV lamp
INSTALLATION SCHEME
check-valve by-pass valves water mains pre-filter
0000000
OM 1200 OM 2800
installations
R e d : Fa i l u r e
WATER STERILIZER
220V - 50 Hz - Max 9 bar
sterilizer
control panel
SPARE PARTS
Quartz coverings. UV lamps.
11
The most extensive range of products in the water filtration/treatment sector. Advice on all aspects of water treatment, filtration and conditioning. Information Bureau at your service with all the latest technical and commercial information. Punctual delivery to all areas. Detailed installation and servicing instructions provided with all products.
FILTERS SX Plastic housings and cartridges with standard flat seals (DOE). Height of models 4, 5, 7, 10, 20. FILTERS BX Plastic housings and cartridges featuring quick-fit connections with 45 mm double O-ring collar. Height of models 5, 7, 10, 20. FILTERS AX Plastic housings and cartridges featuring quick-fit connections with 39,70 mm double O-ring collar. Height of models 5, 7, 10, 20. FILTERS K Brass head housings and cartridges featuring quick-fit connections with double O-ring. Height of models 5, 7, 10, 20. ANTI-SCALE SYSTEMS Proportional and non-proportional dosing systems with polyphosphate crystals. Height of models 4, 5, 7, 10.
Brass-head proportional dosing systems with polyphosphate powder or with ready-to-use polyphosphate refill. Template models, in-line models, T connection models, models with or without by-pass valve. Magnetic anti-scale systems. TECHNO APPLIANCES Automatic softeners with timer or volumetric control valves. Models with integrated or with separated brine tank. Capacity of models from 5 to 300 litres. Automatic iron-removing appliances with timer or volumetric control valves. Capacity of models from 25 to 300 litres.
AfWA /AAE
Automatic chlorine-removing appliances with timer or volumetric control valves. Capacity of models from 25 to 300 litres. Quartzite sand filters impurity-removing appliances with timer or volumetric control valves. Capacity of models from 25 to 300 litres. UV-lamp units for water sterilization. Flow rate from 120 to 2800 litres/h.