Hot Keys: Ctrl + B Ctrl + Y repeats last and previous commands on the MML interrupts current command being typed or run
Alarm monitoring: ZAHO; d BSC only ZEOL:#; r or CF) ZEEI:BCF=#; displays current active alarms in actual MSC an displays active alarms on BCF (BCF = Site Manage displays the operational state of the site
ZEOH:date,time:BCF=#; displays alarm history for site for the date and time lis ted ZAHO:ET,#; ZAHP:ET,#; ZEEL:BL; displays current alarms for that ET (PCM) displays alarm history for that ET displays locked Sites, Sectors and TRXs on BSC
Investigating Clear Codes: ZTUT:CLR; ZTUL:CLR; displays current clear codes on the MSC displays latest history of clear codes
Canceling Bogus alarms on a Site: (Perform both commands) ZEOR:#:alarm #; ZEFR:#:OMU; cancels alarm on site resets the OMU (Operations and Maintenance Unit)
Canceling Bogus alarms on a BSC: ZACC:####; came in ZACA:####; cancels the alarm using the consecutive # in which it cancels the alarm using the alarm identifier #
Locking and unlocking a Site: ZEFS:bcf #:L; ZEFS:bcf #:U; locks entire Site without Forced Handover unlocks entire Site
Locking and unlocking Sectors: ZEQS:BTS=#:L; locks entire sector down without Forced Handover
ZEQS:BTS=#:L:FHO,#; shuts down entire sector with Forced Handover ZEQS:BTS=#:U; unlocks entire sector
Locking and unlocking TRXs: ZERS:BTS=#,TRX=#:L; ZERS:BTS=#,TRX=#:L:FHO,#; ZERS: BTS=#,TRX=#:U; locks TRX down without Forced Handover shuts down TRX with Forced Handover unlocks TRX
Resetting the Site or OMU: ZEFR:#:SITE; ZEFR:#:OMU; restarts SITE restarts OMU
Bouncing Lap D s on a Site: ZDTI:::PCM=#; ZDTC:lap d #:BL; ZDTC:lap d #:WO; displays Lap D channels for entire site blocks desired Lap D channel places Lap D channel in working state
Error Checking on an ET (PCM): ZYMO:ET,#; ZYEU:ET,#:SLIDL=5; checks error counter for specific ET resets error counter for specific ET
Querying the # of calls on a site: ZERO:BTS=#; ZERO:BTS=#,TRX=#; displays all calls on desired sector displays all calls on desired TRX only
Sparing or Rolling a BCSU: ZUSI:BCSU; on ZFWO:BCSU=0&&8; ZUSC:BCSU,#:SP; Y for Yes displays what BCSU the SP was previously displays what BCSU the BL condition is on spares the BCSU with the BL condition on it executes the command
Status ET alarms on a BSC ZAHP:ET,:::; Show all ET's that are in alarm
Taking an ET out of < xml="true" ns="urn:schemas-microsoft-com:office:smarttags" prefix="st1" namespace="">Seperated State ZUSC:ET,#:SE; (SE-NH) Will place the ET in a Separated - No Hardware state
Status session for User ID and commands: ZIGO: Displays commands run for BSC on specific date and time.
Taking an ET out of BL state: ZUSC:ET,#: WORKING BLOCKED TEST SEPERATED SEPERATED-NO HARDWARE Go back up the tree to get it back into Working
Rolling the BCCH on a Sector: ZDTI:::PCM=#; BCCH on ZDTC:lapd:BL; o ZDTC:lapd:AL; to ZDTC:lapd:WO; to ZDTI:::PCM=#; ZDTC:lapd:AD; ZDTC:lapd:BL; ZDTC:lapd:WO; Find out what TSL the radio is on that you want the Block the TSL on the radio that the BCCH is going t Allow activation of the TSL that the BCCH is going Brings TSL to a working state that the BCCH is going Find out what TSL the radio that HAD the BCCH is on Deny Activation of the TSL that HAD the BCCH on it Block the TSL that the BCCH was on Brings the TSL to a working state
RUN DIAGNOSTICS TEST< xml="true" ns="urn:schemas-microsoft-com:office:office" pr efix="o" namespace=""> Zqus:bcf=xx; Then type TOP and hit enter 9 for testing and hit enter 7 for run test and hit enter Once you get printout (No Diagnostic Faults) Type Top and hit enter 1 for fault display and hit enter Should get True (OK) Exit and you will be back out of TRUE card.