2 2
www.ancon.com.au
Ancon designs and manufactures high integrity steel products for the construction industry. Through continuous programmes of new product development, inward investment and employee advancement, the company is committed to maintaining the highest level of customer service within a dynamic and challenging industry. Masonry Support Systems Windposts and Lintels Wall Ties and Restraint Fixings Channel and Bolt Fixings Tension and Compression Systems Stainless Steel Fabrications Flooring and Formed Sections Shear Load Connectors Stainless Steel Reinforcement Reinforcing Bar Couplers Reinforcement Continuity Systems Punching Shear Reinforcement Precast Concrete Accessories
A comprehensive range of stainless steel reinforcing bar is available from Ancon. Stainless steel offers many advantages to the specifier and its use in the Construction Industry continues to increase. Stainless steel reinforcement ensures a high degree of corrosion resistance without requiring additional protection.
Stainless Steel Reinforcement Range Tying Wire Bending and Threading Physical Properties BT Stainless Steel Couplers Other Ancon Products
4 4 4 5-6 7 7
Tying Wire
Tying wire 1.2mm in diameter is available in grade 316 stainless steel.
1.4301 0.224 0.397 0.620 0.893 1.589 2.482 3.878 6.353 9.927 15.512
1.4462 0.221 0.392 0.612 0.882 1.569 2.451 3.829 6.273 9.801 15.315
www.ancon.com.au
Physical Properties
Extended Temperature Performance Stainless Steels are high temperature alloys and Staibar, Stairib and Staifix Hiproof have excellent mechanical performance at elevated temperature. Tests show that on tensile testing at room temperature, after exposure to a heating regime of 600C for 2 hours, the bars show a negligible reduction in tensile stress whilst that for conventional carbon steel shows a significant drop in value over the same temperature cycle. Austenitic stainless steels do not undergo the ductile to brittle condition change of conventional carbon steel as temperature falls. Impact tests on notched bars show a ductile mode of failure at temperatures as low as -196C. Austenitic stainless steel bars are therefore suitable for use in cryogenic and high temperature applications. Low Magnetic Permeability Austenitic grades of stainless steel have extremely low magnetic permeability characteristics and are virtually non-magnetic. This property can be very helpful to the designer of structures housing equipment such as electric arc furnaces, magnetic resonance imaging (MRI) units or other sensitive electronic equipment where a neutral magnetic environment is a requirement. Please note, Staifix Hiproof (Duplex) is a magnetic steel.
Note: Plain round 1.4462 (Duplex) bars are available in diameters from 6mm to 50mm; the mechanical properties of the bars are dependent upon the bar size and will vary in tensile strength from 450MPa - 650MPa minimum. Please contact Ancon Building Products for further information.
www.ancon.com.au
Masonry Support Systems Windposts and Lintels Wall Ties and Restraint Fixings Channel and Bolt Fixings Tension and Compression Systems Stainless Steel Fabrications Flooring and Formed Sections Shear Load Connectors Stainless Steel Reinforcement Reinforcing Bar Couplers Reinforcement Continuity Systems Punching Shear Reinforcement Precast Concrete Accessories
Ancon Building Products 114 Kurrajong Avenue Mount Druitt Sydney NSW 2770 Australia Tel: 1300 304 320 Fax: +61 (0) 2 9675 3390 Ancon Building Products 4/15 Terrace Place Murarrie Brisbane QLD 4172 Australia Tel: 1300 304 320 Fax: +61 (0) 7 3395 6693 International Enquiries: +61 (0) 2 8808 1111 Email: info@ancon.com.au Web: www.ancon.com.au Overseas Offices: Ancon Building Products Sheffield United Kingdom www.ancon.co.uk Ancon Building Products GesmbH Vienna Austria www.ancon.at
These products are available from:
Ancon Building Products 7-9 Second Avenue Sunshine Melbourne VIC 3020 Australia Tel: 1300 304 320 Fax: +61 (0) 3 9311 1777 Ancon Building Products 82 Chisholm Crescent Kewdale Perth WA 6105 Australia Tel: 1300 304 320 Fax: +61 (0) 8 9453 2300
Ancon (Schweiz) AG Ried bei Kerzers Switzerland www.ancon.ch Ancon GmbH Nuremberg Germany www.anconbp.de
The construction applications and details provided in this literature are indicative only. In every case, project working details should be entrusted to appropriately qualified and experienced persons. Whilst every care has been exercised in the preparation of this document to ensure that any advice, recommendations or information is accurate, no liability or responsibility of any kind is accepted in respect of Ancon Building Products. With a policy of continuous product development Ancon Building Products reserves the right to modify product design and specification without due notice.