13
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2013.06.19 9565SCAVOL13E1306H1
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2013.06.19 9565SCAVOL13E1306H1
CONTENTS
page
4 5 5 6 7 9 9
3. Characteristics of Super Capacitor 4. Typical Applications 5. Part Number System 6. Rated Specifications
6.1 FC SeriesSMD Type 6.2 FM Series 6.3 FG Series 6.4 FT Series 6.5 FY Series 6.6 FR Series 6.7 FS Series
13 20 22 24 26 28
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2013.06.19 9565SCAVOL13E1306H1
FC
FME FML
Type 5.5V
FM
FMR
FT
FG
FGR
Type 5.5V
FS
FY
series 5.5V
FR
series 5.5V
FE
FA
HV
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2013.06.19 9565SCAVOL13E1306H1
Backup current
mA
High power SuperCapacitor HV Series Low impedance application use FA, FE, FS, FT, FM Series
High ESR
A
0.01 0.1 1 10 102
103 1 hour
104
105
106
1 minute
1 day 1 week
107
Capacitor Aluminum electrolysis capacito Super Capacitor 40 to 85 FRFT few minutes limitless (*1) none applicable applicable (FM and FC series) gas emission (*2)
(*1) Aluminum electrolysis capacitor and Super Capacitor has limited lifetime. However, when used under proper conditions, both can operate sufciently within the designed lifetime of the set they are built in. (*2) There is no harm as it is a mere leak of water vapor which transitioned from water contained in the electrolyte (diluted sulfuric acid). However, application of abnormal voltage surge exceeding maximum operating voltage may result in leakage and explosion.
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2013.06.19 9565SCAVOL13E1306H1
4. Typical Applications
As in the characteristics remarked previously, Super Capacitor has characteristics intermediate between general capacitors and batteries. Because of this, Super Capacitor can be used like a secondary battery when applied to DC circuit. The best suited shows main application examples. applications of Super Capacitor are back-up device for the power shut-down of micro computers and RAM's. The list below
CMOS RAM, IC for clocks Long time back-up 500A and below CMOS micro computer, IC for clocks
Driving motor Subsidiary power supply for driving motor during voltage drop
Power source of toys, LED, buzzer 1 A and below High current supply for a short amount of time Power supply, Subsidiary power supply
FA series FE series
Up to several A
HV series
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2013.06.19 9565SCAVOL13E1306H1
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2013.06.19 9565SCAVOL13E1306H1
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2013.06.19 9565SCAVOL13E1306H1
Dimensions
B0.2 D0.5 H max. L A0.2 Negative terminal K I P I W0.1 Positive terminal
Markings
Polarity (negative)
Displays nominal capacitance, MAX operating voltage serial number, polarity and etc.
Nominal capacitance Series name Polarity (negative) Logo MAX operating voltage Polarity (negative) Nominal capacitance
473 5 .5 V A1
NT
Date code
473 5.5V A1 S
FC0H474ZFTBR32-SS FC0H105ZFTBR44-SS
Standard models
FC Type
Part Number FC0H473ZFTBR24 FC0H104ZFTBR24 FC0H224ZFTBR24 FC0H474ZFTBR32-SS FC0H105ZFTBR44-SS FC0V104ZFTBR24 FC0V224ZFTBR24 FC0V474ZFTBR24 Voltage Max. Nominal Max. ESR current Holding Operating Capacitance Max. at Characteristic Voltage Discharge (at(1kHz) 30 minutes ) Min. (V) (Vdc) system (F) (mA) 5.5 0.047 0.10 0.22 0.47 1.0 0.10 0.22 0.47 50 0.071 0.15 0.33 0.71 1.50 0.09 0.20 0.42 4.2 5.5 5.5 5.5 5.5 3.5 3.5 3.5 25 25 13 7 50 25 25 4.2 4.2 4.2 4.2 Dimension (Unit:mm) D 10.5 10.5 10.5 16.0 21.0 10.5 10.5 10.5 H 5.5 5.5 8.5 9.5 10.5 5.5 5.5 8.5 A 10.8 10.8 10.8 16.3 21.6 10.8 10.8 10.8 B 10.8 10.8 10.8 16.3 21.6 10.8 10.8 10.8 I 3.60.5 3.60.5 6.81.0 3.60.5 3.60.5 3.60.5 7.01.0 3.60.5 W 1.2 1.2 1.2 1.2 1.4 1.2 1.2 1.2 P 5.0 5.0 5.0 5.0 10.0 5.0 5.0 5.0 K 0.70.3 0 0.70.3 0 1.20.5 0 0.70.3 0 0.70.3 0 0.70.3 0 1.20.5 0 0.70.3 0 L
0.3 0.1 0.3 0.1 0.3 0.1 0.5 0.1 0.5 0.1 0.3 0.1 0.3 0.1 0.3 0.1
Weight (g) 1.0 1.0 1.4 4.0 6.7 1.0 1.0 1.4
FCS Type
Part Number FCS0H473ZFTBR24 FCS0H104ZFTBR24 FCS0H224ZFTBR24 FCS0V104ZFTBR24 FCS0V224ZFTBR24 FCS0V474ZFTBR24
Max. Nominal Max. Voltage ESR current Operating Capacitance Max. at Holding Voltage Discharge (at(1kHz) 30 minutes Characteristic ) (Vdc) system (F) (mA) Min. (V) 5.5 0.047 0.10 0.22 0.10 0.22 0.47 100 50 50 100 50 50 0.071 0.15 0.33 0.09 0.20 0.42 4.2 5.5 5.5 3.5 3.5 3.5 4.2 4.2
Dimension (Unit:mm) D 10.7 10.7 10.7 10.7 10.7 10.7 H 5.5 5.5 8.5 5.5 5.5 8.5 A 10.8 10.8 10.8 10.8 10.8 10.8 B 10.8 10.8 10.8 10.8 10.8 10.8 I 3.90.5 3.90.5 3.90.5 3.90.5 3.90.5 3.90.5 W 1.2 1.2 1.2 1.2 1.2 1.2 P 5.0 5.0 5.0 5.0 5.0 5.0 K 0.90.3 0 0.90.3 0 0.90.3 0 0.90.3 0 0.90.3 0 0.90.3 0 L
0.3 0.1 0.3 0.1 0.3 0.1 0.3 0.1 0.3 0.1 0.3 0.1
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2013.06.19 9565SCAVOL13E1306H1
This series is exclusively for reow soldering. It is designed for thermal conduction system such as combination use of infrared The reow condition must be kept within reow prole graphs shown below. second reow. ray and heat blow. Consult with NEC TOKIN before applying other methods.
Applying reow soldering is limited to 2 times. After the rst reow, cool down the capacitor thoroughly to 5-35 before the
Always consult with NEC TOKIN when applying reow soldering in a more severe condition than the condition described here.
FCS Type
FC Type
Reflow profile
Peak temperature
Peak temperature :
Time (sec)
200
250
300
350
400
Peak temperature ()
Above "Reflow Profile" graph indicates temperature at the terminals and capacitor top.
Tp Time exceeding 200 250 240 230 220 210 200 0 10 20 30 Tp (sec) 40 50 60
Peak temperature Over 255 Over 230 Over 220 Over 217 Time between 150 to 200 temperature zone over 170 within 50sec.
Below 260 Within 10sec. Within 45sec. Within 60sec. Within 70sec. 150sec.
Above "Reflow Profile" graph indicates temperature at the terminals and capacitor top.
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2013.06.19 9565SCAVOL13E1306H1
(mm) Mark A B 3802 TBR24 3302 1001 210.8 25.50.5 25.51.0 20.5 130.5 TBR32 3802 1001 210.8 20.5 130.5 TBR44
R:10
D E
t
1001
801
W t
33.51.0 2.0
45.51.0 2.0
P0
D0
(mm) Mark W A B P0 P1 P2 F D0 t1 E TBR24 24.0 11.4 13.0 4.0 16.0 2.0 11.5 1.55 0.4 1.75 Product height 5.5mm Product height 8.5mm 6.0 8.4 TBR32 32.0 18.0 20.0 4.0 24.0 2.0 14.2 1.55 0.5 1.75 10.0 28.4 TBR44 44.0 23.0 25.0 4.0 32.0 2.0 20.2 1.55 0.5 1.75 12.0 40.4
F B
P1 Forward direction P2 P0
D0
t2
TBR32/44
t1
A
F W
B
t2 G
t2
P1
R0.75
0.2
Land pattern
(mm) Part Number FC0H473ZFTBR24 FC0H104ZFTBR24 FC0H224ZFTBR24 FC0H474ZFTBR32-SS FC0H105ZFTBR44-SS FC0V104ZFTBR24 FC0V224ZFTBR24 FC0V474ZFTBR24 FCS0H473ZFTBR24 FCS0H104ZFTBR24 FCS0H224ZFTBR24 FCS0V104ZFTBR24 FCS0V224ZFTBR24 FCS0V474ZFTBR24 A 5.0 5.0 5.0 5.0 10.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 B 4.6 4.6 4.6 10.0 10.5 4.6 4.6 4.6 4.9 4.9 4.9 4.9 4.9 4.9 C 2.5 2.5 2.5 2.5 3.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5
Lead terminal
(mm) Part Number FC0H473ZFTBR24 FC0H104ZFTBR24 FC0H224ZFTBR24 FC0H474ZFTBR32-SS FC0H105ZFTBR44-SS FC0V104ZFTBR24 FC0V224ZFTBR24 FC0V474ZFTBR24 FCS0H473ZFTBR24 FCS0H104ZFTBR24 FCS0H224ZFTBR24 FCS0V104ZFTBR24 FCS0V224ZFTBR24 FCS0V474ZFTBR24 A 5.0 5.0 5.0 5.0 10.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 B 3.6 3.6 3.6 6.8 7.0 3.6 3.6 3.6 3.9 3.9 3.9 3.9 3.9 3.9 C 1.2 1.2 1.2 1.2 1.4 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2
Logo
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2013.06.19 9565SCAVOL13E1306H1
Specications
Series name Item Category temperature range MAX operating voltage Capacitance Capacitance allowance ESR Current (30-minutes value) Capacitance ESR Current (30 minutes value) * Surge Appearance No obvious abnormality 25 to 70 5.5Vdc, 3.5Vdc Refer to standard ratings 80 , 20 Refer to standard ratings Refer to standard ratings More than 90% of initial ratings Not to exceed 120% of initial ratings Not to exceed 120% of initial ratings Refer to Measurement Conditions Refer to Measurement Conditions Measured at 1kHz, 10mA ; See also Measurement Conditions Refer to Measurement Conditions Surge voltage4.0V (3.5V type, 3.6V type) 6.3V (5.5V type) Charge30 sec. Discharge9min 30sec. Number of cycles1000 Series resistance 0.047F 300 0.10F 150 0.22F 56 0.47F 30 1.0F 15 Discharge resistance0 Temperature702 FC 5.5V type, 3.5V type Test conditions (conforming to JIS C 5160-1)
* Vibration resistance
Capacitance ESR Capacitance ESR Capacitance ESR Current (30 minutes value) Capacitance ESR Current (30 minutes value) Capacitance ESR Current (30 minutes value) Appearance Capacitance ESR Current (30 minutes value) Appearance Capacitance ESR Current (30 minutes value) Appearance Capacitance
50% higher than initial value 400% or less than initial value
Phase 6
200% or less than initial value Satisfy initial ratings 1.5CV (mA) or below Within 20% of initial value Satisfy initial ratings Satisfy initial ratings
Satisfy initial ratings No obvious abnormality Satisfy initial ratings No obvious abnormality Satisfy initial ratings No obvious abnormality Within 20% of initial value Not to exceed 120% of initial ratings Not to exceed 120% of initial ratings No obvious abnormality Within 30% of initial value Below 200% of initial ratings Below 200% of initial ratings No obvious abnormality
Conforms to 4.13 Frequency10 to 55 Hz Testing time6 hours Cooled down to ambient temperature after reow soldering, then the product must fulll the condition stated left. (See page 10 for reow condition) Conforms to 4.12 Temperature condition25 Room temperature 70 Room temperature Number of cycles5 Cycles Conforms to 4.14 Temperature402 Relative humidity90 to 95 RH Testing time2408 hours Conforms to 4.15 Voltage appliedMAX operating voltage Series protection resistance0 48 Testing time1000 0Hours Charging condition Voltage applied5.0Vdc (Terminal at the case's side be negative) Series resistance0 Charging time24 hours Let stand for 24 hours in condition described below with terminals opened. Ambient temperatureLower than 25 Relative humidityLower than 70%RH
* Temperature cycle
ESR Current (30 minutes value) Appearance Capacitance ESR Current (30 minutes value) Appearance
5.5V type: Voltage between terminal leads higher than 4.2V 3.5V type: Not specied
Storage
As for items with * , it must fulll the above condition after the reow soldering. (See page 10 for reow conditions)
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2013.06.19 9565SCAVOL13E1306H1
6.2 FM Series
Dimensions
10.50.5 T0.5
11.50.5
0.40.1 51
0.50.1 50.5
0.40.1
Unitmm
Markings
Negative polarity identification
NT
MAX operating voltage Nominal capacitance
5.5V
473
A1
E FME type marking L FML type marking RFMR type marking Date code
Polarity
2.2 to 5mm
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2013.06.19 9565SCAVOL13E1306H1
Specications
5.5V Type
Part Number Bulk FM0H103ZF FM0H223ZF FM0H473ZF FM0H104ZF FM0H224ZF Ammo pack FM0H103ZFTP FM0H223ZFTP FM0H473ZFTP FM0H104ZFTP FM0H224ZFTP MAX operating voltage Vdc 5.5 5.5 5.5 5.5 5.5
Nominal capacitance
Charge Discharge system(F) system(F)
To complete the part number, insert lead length (16mm or 18mm) in to the "( )"
3.5V Type
Part Number Bulk FM0V473ZF FM0V104ZF FM0V224ZF Ammo pack FM0V473ZFTP FM0V104ZFTP FM0V224ZFTP MAX operating voltage Vdc 3.5 3.5 3.5
Nominal capacitance
Charge system(F) Discharge system(F)
To complete the part number, insert lead length (16mm or 18mm) in to the "( )"
6.5V Type
Part Number Bulk FM0J473ZF Ammo pack FM0J473ZFTP MAX operating voltage Vdc 6.5
Nominal capacitance
Charge system(F) Discharge system(F)
T mm 6.5
Weight g 1.6
0.047
0.062
To complete the part number, insert lead length (16mm or 18mm) in to the "( )"
0.022 0.047
To complete the part number, insert lead length (16mm or 18mm) in to the "( )"
0.062
To complete the part number, insert lead length (16mm or 18mm) in to the "( )"
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2013.06.19 9565SCAVOL13E1306H1
FMC Type
Dimensions
b 0.5
Chip parts applicable to treatment in bond hardening furnace (1605 for 12010 seonds)
T0.5
a 0.5
0.40.1 51
d1 0.1 50.5
d 2 0.1
Unitmm
Markings
Negative polarity identification
NT
MAX operating voltage Nominal capacitance
5.5V
473
K1
Specications
Part Number Bulk Ammo pack Nominal Voltage MAX MAX a MAX ESR holding operating capacitance current at at 1 kHz voltage 30 min. characteristics Charge Discharge (mm) V Vdc system(F) system(F) mA 5.5 5.5 5.5 0.047 0.10 0.06 0.13 0.33 100 50 25 0.071 0.15 0.50 4.2 4.2 4.2 11.5 11.5 b (mm) 10.5 10.5 T (mm) 5.0 6.5 9.0 d1 (mm) 0.5 0.5 0.6 d2 (mm) 0.4 0.4 0.6 Weight g 1.3 1.6 3.5
15.0 14.0
To complete the part number, insert lead length (16mm or 18mm) in to the "( )"
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2013.06.19 9565SCAVOL13E1306H1
P1
L
W4
W2
t3
W0
W1
P0
D0
t2
t1
Unitmm Item Component Height Component Width Symbol a b Value 11.5 10.5 Tolerance 0.5 0.5 5.5 V type 3.5 V type FME type FML type 6.5 V type FMR type FMC type : 5.0/0.010F to 0.047F, 6.5/0.047F : 5.0/0.047F to 0.10F, 6.5/0.22F : 5.0/0.022F to 0.047F : 5.0/0.033F : 6.5/0.047F, 0.10F : 6.5/0.047F : 5.0/0.047F, 6.5/0.10F Remarks
Component Thickness
0.5
Lead-wire Width Lead-wire Thickness Pitch between Component Sprocket Hole Pitch Sprocket Hole to Lead Lead Spacing Component Alignment Tape Width Hold-down tape Width Sprocket Hole Position Hold-down Tape Position Component's Bottom Line Position Sprocket Hole Diameter Total tape Thickness Defect Component Cut-off Position
W4 t3 P P0 P1 P2 F
0.5 0.4 12.7 12.7 3.85 6.35 5.0 2.0 Max. 18.0 12.5 Min. 9.0 3.0 Max. 16.0 18.0 4.0 0.7 1.5 Max. 11.0 Max.
0.1 0.1 1.0 0.3 0.7 1.3 0.5 1.0 0.5 0.5 0.5 0.5 0.2 0.2 No protrusion of tape. Including tilting caused by bending lead wire.
h
W W0 W1 W2 H D0 t1 t2 L
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2013.06.19 9565SCAVOL13E1306H1
P1
W4
W2
t3
W0
W1
P0
D0
t2
t1
Unitmm Item Component Height Component Width Component Thickness Lead-wire Width Lead-wire Thickness Pitch between Component Sprocket Hole Pitch Sprocket Hole to Lead Lead Spacing Component Alignment Tape Width Hold-down tape Width Sprocket Hole Position Hold-down Tape Position Component's Bottom Line Position Sprocket Hole Diameter Total tape Thickness Defect Component Cut-off Position Symbol a b c W4 t3 P P0 P1 P2 F Value 15.0 14.0 9.0 0.6 0.6 25.4 12.7 3.85 6.35 5.0 2.0 Max. 18.0 12.5 Min. 9.0 3.0 Max. 16.0 18.0 4.0 0.67 1.7 Max. 11.0 Max. Tolerance 0.5 0.5 0.5 0.1 0.1 1.0 0.3 0.7 1.3 0.5 1.0 0.5 0.5 0.5 0.5 0.2 0.2 No protrusion of tape Including tilting caused by bending lead wire Remarks
h
W W0 W1 W2 H D0 t1 t2 L
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2013.06.19 9565SCAVOL13E1306H1
Specications
Category temperature range MAX operating voltage Capacitance Capacitance allowance ESR Current (30-minutes value) Capacitance ESR Current (30 minutes value) Item Series name 25 to 70 5.5V type, 3.5V type, 6.5V type FMC type FML, FME type 25 to 70 5.5Vdc 0.022F, 0.033F, 0.047F 80 , 20 Refer to standard ratings Refer to standard ratings More than 90% of initial ratings Not to exceed 120% of initial ratings Not to exceed 120% of initial ratings Refer to Measurement Conditions Refer to Measurement Conditions Test conditions (conforming to JIS C 5160-1)
Refer to standard ratings Refer to standard ratings More than 90% of initial ratings Not to exceed 120% of initial ratings Not to exceed 120% of initial ratings
Measured at 1kHz, 10mA ; See also Measurement Conditions Refer to Measurement Conditions Surge voltage4.0V (3.5V type) 6.3V (5.5V type) 7.4V (6.5V type) Charge30 sec. Discharge9min 30sec. Number of cycles1000 Series resistance 0.010F 1500 0.022F 560 0.033F 510 0.047F 300 0.068F 240 0.10F 150 0.22F 56 0.33F 51 Discharge resistance0 Temperature702
Capacitance ESR Capacitance ESR Capacitance ESR Current (30 minutes value) Capacitance ESR Current (30 minutes value) Capacitance ESR Current (30 minutes value) Appearance
50% or higher than initial value 400% or less than initial value
50% or higher than initial value 400% or less than initial value
200% or less than initial value Satisfy initial ratings 1.5CV (mA) or below Within 20% of initial value Satisfy initial ratings Satisfy initial ratings
200% or less than initial value Satisfy initial ratings 1.5CV (mA) or below Within 20% of initial value Satisfy initial ratings Satisfy initial ratings
Conforms to 4.9 Conforms to 4.13 Frequency10 to 55 Hz Testing time6 hours Conforms to 4.11 Solder temp2455 Dipping time50.5 sec. 1.6mm from the bottom should be dipped. Conforms to 4.10 Solder temp26010 Dipping time101 sec. 1.6mm from the bottom should be dipped. Conforms to 4.12 Temperature condition25 Room temperature 70 Room temperature Number of cycles5 Cycles Conforms to 4.14 Temperature402 Relative humidity90 to 95 RH Testing time2408 hours Conforms to 4.15 Temperature702 Voltage appliedMAX operating voltage Series protection resistance0 48 Testing time1000 0Hours Charging condition Voltage applied5.0Vdc (Terminal at the case's side be negative) Series resistance0 Charging time24 hours Let stand for 24 hours in condition described below with terminals opened. Ambient temperatureLower than 25 Relative humidityLower than 70%RH
No obvious abnormality Over 3/4 of the terminal should be covered by the new solder
No obvious abnormality Over 3/4 of the terminal should be covered by the new solder Satisfy initial ratings No obvious abnormality Satisfy initial ratings No obvious abnormality Within 20% of initial value Not to exceed 120% of initial ratings Not to exceed 120% of initial ratings No obvious abnormality Within 30% of initial value Below 200% of initial ratings Below 200% of initial ratings No obvious abnormality
Solderability Capacitance ESR Current (30 minutes value) Appearance Capacitance ESR Current (30 minutes value) Appearance ESR Current (30 minutes value) Appearance Capacitance ESR Current (30 minutes value) Appearance Capacitance
Satisfy initial ratings No obvious abnormality Satisfy initial ratings No obvious abnormality Within 20% of initial value Not to exceed 120% of initial ratings Not to exceed 120% of initial ratings No obvious abnormality Within 30% of initial value Below 200% of initial ratings Below 200% of initial ratings No obvious abnormality 5.5V type: Voltage between terminal leads higher than 4.2V 3.5V type: Not specied 6.5V type: Not specied
Temperature cycle
Storage
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2013.06.19 9565SCAVOL13E1306H1
Specications
Item Category temperature range MAX operating voltage Capacitance Capacitance allowance ESR Current (30-minutes value) Capacitance ESR Surge Current (30 minutes value) Appearance Capacitance ESR Capacitance ESR Capacitance ESR Current (30 minutes value) Capacitance ESR Current (30 minutes value) Capacitance ESR Current (30 minutes value) Appearance Solderability Capacitance ESR Current (30 minutes value) Appearance Temperature cycle Capacitance ESR Current (30 minutes value) Appearance Capacitance High temp. and high humidity resistance ESR Current (30 minutes value) Appearance Capacitance High temperature load ESR Current (30 minutes value) Appearance Series name 40 to 85 5.5Vdc, 3.5Vdc 0.047F, 0.10F 80 , 20 Refer to standard ratings Refer to standard ratings More than 90% of initial ratings Not to exceed 120% of initial ratings Not to exceed 120% of initial ratings No obvious abnormality 50% or higher than initial value 400% or less than initial value 30% or higher than initial value Below 700% of the initial value 200% or less than initial value Satisfy initial ratings 1.5CV (mA) or below Within 20% of initial value Satisfy initial ratings Satisfy initial ratings Refer to Measurement Conditions Refer to Measurement Conditions Measured at 1kHz, 10mA ; See also Measurement Conditions Surge voltage4.0V (3.5V type) 6.3V (5.5V type) Charge30 sec. Discharge9min 30sec. Number of cycles1000 Series resistance 0.047F 300 0.10F 150 Discharge resistance0 Temperature852 Conforms to 4.17 Phase1252 Phase2252 Phase3402 Phase4252 Phase5702 Phase6252 Conforms to 4.9 Conforms to 4.13 Frequency10 to 55 Hz Testing time6 hours Conforms to 4.11 Solder temp2455 Dipping time50.5 sec. 1.6mm from the bottom should be dipped. Conforms to 4.10 Solder temp26010 Dipping time101 sec. 1.6mm from the bottom should be dipped. Conforms to 4.12 Temperature condition40 Room temperature 85 Room temperature Number of cycles5 Cycles Conforms to 4.14 Temperature402 Relative humidity90 to 95 RH Testing time2408 hours Conforms to 4.15 Temperature852 Voltage appliedMAX operating voltage Series protection resistance0 48 Testing time1000 0Hours Charging condition Voltage applied5.0Vdc (Terminal at the case's side be negative) Series resistance0 Charging time24 hours Let stand for 24 hours in condition described below with terminals opened. Ambient temperatureLower than 25 Relative humidityLower than 70%RH Refer to Measurement Conditions FMR type Test conditions (conforming to JIS C 5160-1)
Phase 6
No terminal damage Satisfy initial ratings No obvious abnormality Over 3/4 of the terminal should be covered by the new solder Satisfy initial ratings No obvious abnormality Satisfy initial ratings No obvious abnormality Within 20% of initial value Not to exceed 120% of initial ratings Not to exceed 120% of initial ratings No obvious abnormality Within 30% of initial value Below 200% of initial ratings Below 200% of initial ratings No obvious abnormality
5.5V type: Voltage between terminal leads higher than 4.2V 3.5V type: Not specied
Storage
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2013.06.19 9565SCAVOL13E1306H1
6.3 FG Series
Dimensions
D 0.5
H MAX. 0.3 MIN. MIN.
Markings on sleeve
Date code Serial number A1 001 A1 FG 5.5 V 0.22 F
Super Capacitor
FG 5.5 V 0.22 F
Sleeve
FG Type
Specications
Part Number FG0H103ZF FG0H223ZF FG0H473ZF FG0H104ZF FG0H224ZF FG0H474ZF FG0H105ZF FG0H225ZF FG0H475ZF FG0V155ZF MAX operating voltage Vdc 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 3.5 Nominal capacitance
Charge system (F)
MAX Voltage MAX ESR current at holding at 1 kHz Discharge 30 min. characteristics system (F) mA V 0.013 0.028 0.060 0.13 0.28 0.60 1.3 2.8 6.0 2.2 300 200 200 100 100 120 65 35 35 65 0.015 0.033 0.071 0.15 0.33 0.71 1.5 3.3 7.1 1.5 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2
Dimension (unit:mm) D 11.0 11.0 11.0 11.0 13.0 14.5 16.5 21.5 28.5 16.5 H 5.5 5.5 5.5 6.5 9.0 18.0 19.0 19.0 22.0 14.0 P 5.08 5.08 5.08 5.08 5.08 5.08 5.08 7.62 10.16 5.08 2.7 2.7 2.7 2.7 2.2 2.4 2.7 3.0 6.1 3.1 d1 0.2 0.2 0.2 0.2 0.4 0.4 0.4 0.6 0.6 0.4 d2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.4 1.2
Weight g 0.9 1.0 1.0 1.3 2.5 5.1 7.0 12.1 27.3 5.2
0.010 0.022 0.047 0.10 0.22 0.47 1.0 2.2 4.7 1.5
FGH Type
Specications
Part Number FGH0H104ZF FGH0H224ZF FGH0H474ZF FGH0H105ZF MAX operating voltage Vdc 5.5 5.5 5.5 5.5 Nominal capacitance
Charge system (F)
MAX Voltage MAX ESR current at holding at 1 kHz Discharge 30 min. characteristics system (F) mA V 0.10 0.22 0.47 1.0 100 100 65 35 0.15 0.33 0.71 1.5 4.2 4.2 4.2 4.2
Dimension (unit:mm) D 11.0 11.0 16.5 21.5 H 5.5 7.0 8.0 9.5 P 5.08 5.08 5.08 7.62 2.7 2.7 2.7 3.0 d1 0.2 0.2 0.4 0.6 d2 1.2 1.2 1.2 1.2
FGR Type
Specications
Part Number FGR0H474ZF FGR0H105ZF FGR0H225ZF MAX operating voltage Vdc 5.5 5.5 5.5 Nominal capacitance
Charge system (F) Discharge at 1 kHz 30 min. system (F)
MAX ESR
Dimension (unit:mm) D 14.5 16.5 21.5 H 18.0 19.0 19.0 P 5.08 5.08 7.62 2.4 2.7 3.0 d1 0.4 0.4 0.6 d2 1.2 1.2 1.2
120 65 35
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2013.06.19 9565SCAVOL13E1306H1
Specications
Item Category temperature range MAX operating voltage Capacitance Capacitance allowance ESR Current (30-minutes value) Capacitance ESR Current (30 minutes value) Series name FG, FGH type 25 to 70 5.5Vdc, 3.5Vdc FG0.010F to 4.7F FGH0.10F to 1.0F 80 , 20 Refer to standard ratings Refer to standard ratings More than 90% of initial ratings Not to exceed 120% of initial ratings Not to exceed 120% of initial ratings FGR type 40 to 85 5.5Vdc 0.47F to 2.2F 80 , 20 Refer to standard ratings Refer to standard ratings More than 90% of initial ratings Not to exceed 120% of initial ratings Not to exceed 120% of initial ratings Test conditions (conforming to JIS C 5160-1)
Refer to Measurement Conditions Refer to Measurement Conditions Measured at 1kHz, 10mA ; See also Measurement Conditions Refer to Measurement Conditions Surge voltage6.3V (5.5V type) 4.0V(3.5V type) Charge30 sec. Discharge9min 30sec. Number of cycles1000 Series resistance 0.010F 1500 0.022F 560 0.047F 300 0.10F 150 0.22F 56 0.47F 30 1.0F, 1.5F 15 2.2F, 4.7F 10 Discharge resistance0 Temperature852 (FGR) 702 (FG, FGH)
Capacitance ESR Capacitance ESR Characteristics Capacitance in different ESR temperature Current (30 minutes value) Capacitance ESR Current (30 minutes value) Lead strength (tensile) Capacitance ESR Vibration resistance Current (30 minutes value) Appearance Solderability Capacitance ESR Current (30 minutes value) Appearance Capacitance ESR Current (30 minutes value) Appearance Capacitance ESR Current (30 minutes value) Appearance Capacitance ESR Current (30 minutes value) Appearance
50% or higher than initial value 400% or less than initial value
200% or less than initial value Satisfy initial ratings 1.5CV (mA) or below Within 20% of initial value Phase Satisfy initial ratings 6 Satisfy initial ratings No terminal damage Satisfy initial ratings No obvious abnormality Over 3/4 of the terminal should be covered by the new solder Satisfy initial ratings No obvious abnormality Satisfy initial ratings No obvious abnormality Within 20% of initial value Not to exceed 120% of initial ratings Not to exceed 120% of initial ratings No obvious abnormality Within 30% of initial value Below 200% of initial ratings Below 200% of initial ratings No obvious abnormality
50% or higher than initial value 400% or less than initial value Phase 30% or higher than initial value 3 700% or less than initial value 200% or less than initial value Phase Satisfy initial ratings 5 1.5CV (mA) or below Within 20% of initial value Phase Satisfy initial ratings 6 Satisfy initial ratings No terminal damage Phase 2 Satisfy initial ratings No obvious abnormality Over 3/4 of the terminal should be covered by the new solder Satisfy initial ratings No obvious abnormality Satisfy initial ratings No obvious abnormality Within 20% of initial value Not to exceed 120% of initial ratings Not to exceed 120% of initial ratings No obvious abnormality Within 30% of initial value Below 200% of initial ratings Below 200% of initial ratings No obvious abnormality
Conforms to 4.17 Phase1 252 Phase2 252 Phase3 402 (FGR) Phase4 252 Phase5 702 (FG, FGH) 852 (FGR) Phase6 252
Conforms to 4.9 Conforms to 4.13 Frequency10 to 55 Hz Testing time6 hours Conforms to 4.11 Solder temp2455 Dipping time50.5 sec. 1.6mm from the bottom should be dipped. Conforms to 4.10 Solder temp26010 Dipping time101 sec. 1.6mm from the bottom should be dipped. Conforms to 4.12 Temperature conditionCategory MIN tempRoom temp Category MAX tempRoom temp Number of cycles5 Cycles Conforms to 4.14 Temperature402 Relative humidity90 to 95 RH Testing time2408 hours Conforms to 4.15 TempCategory MAX temp 2 Voltage appliedMAX operating voltage Series protection resistance0 48 Testing time1000 0Hours Charging condition Voltage applied5.0Vdc (Terminal at the case's side be negative) Series resistance0 Charging time24 hours
Temperature cycle
5.5V type: Voltage between terminal leads higher than 4.2V 3.5V type: Not specied
Storage
Let stand for 24 hours in condition described below with terminals opened. Ambient temperatureLower than 25 Relative humidityLower than 70%RH
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2013.06.19 9565SCAVOL13E1306H1
6.4 FT Series
Dimensions
D 0.5
MIN. H MAX.
Markings on sleeve
Date code
0.3 MIN.
A1 001 FT 5.5 V
Super Capacitor
Sleeve
Serial number
FT
5.5 V
A1 85 0.22 F
85 0.22 F
Specications
Part Number FT0H104ZF FT0H224ZF FT0H474ZF FT0H105ZF FT0H225ZF FT0H335ZF FT0H565ZF MAX operating voltage Vdc 5.5 5.5 5.5 5.5 5.5 5.5 5.5 Nominal capacitance
Charge system (F) Discharge system (F)
MAX ESR MAX current at 1 kHz at 30 min. mA 16 10 6.5 3.5 1.8 1.0 0.6 0.15 0.33 0.71 1.5 3.3 5.0 8.4
Dimension (unit:mm) D 11.5 14.5 16.5 21.5 28.5 36.5 44.5 H 8.5 12.0 13.0 13.0 14.0 15.0 17.0 P 5.08 5.08 5.08 7.62 10.16 15.00 20.00 d1 0.4 0.4 0.4 0.6 0.6 0.6 1.0 d2 1.2 1.2 1.2 1.2 1.4 1.7 1.4 2.7 2.2 2.7 3.0 6.1 6.1 6.1
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2013.06.19 9565SCAVOL13E1306H1
Specications
Item Category temperature range MAX operating voltage Capacitance Capacitance allowance ESR Current (30-minutes value) Capacitance ESR Current (30 minutes value) Series name 40 to 85 5.5Vdc 0.1F to 5.6F 80 , 20 Refer to standard ratings Refer to standard ratings More than 90% of initial ratings Not to exceed 120% of initial ratings Not to exceed 120% of initial ratings Refer to Measurement Conditions Refer to Measurement Conditions Measured at 1kHz, 10mA ; See also Measurement Conditions Surge voltage6.3V Charge30 sec. Discharge9min 30sec. Number of cycles1000 Series resistance 0.10F 0.22F 0.47F 1.0F 2.2F 3.3F 5.6F Discharge resistance0 Temperature852 Conforms to 4.17 Phase1252 Phase2252 Phase3402 Phase4252 Phase5702 Phase6252 Conforms to 4.9 Conforms to 4.13 Frequency10 to 55 Hz Testing time6 hours Conforms to 4.11 Solder temp2455 Dipping time50.5 sec. 1.6mm from the bottom should be dipped. Conforms to 4.10 Solder temp26010 Dipping time101 sec. 1.6mm from the bottom should be dipped. Conforms to 4.12 Temperature condition40 Room temperature 85 Room temperature Number of cycles5 Cycles Conforms to 4.14 Temperature402 Relative humidity90 to 95 RH Testing time2408 hours Conforms to 4.15 Temperature852 Voltage appliedMAX operating voltage Series protection resistance0 48 Testing time1000 0Hours Refer to Measurement Conditions FT type Test conditions (conforming to JIS C 5160-1)
150 56 30 15 10 10 10
Capacitance ESR Capacitance ESR Capacitance ESR Current (30 minutes value) Capacitance ESR Current (30 minutes value) Capacitance ESR Current (30 minutes value) Appearance
Phase 6
50% or higher than initial value 400% or less than initial value 30% or higher than initial value 700% or less than initial value 200% or less than initial value Satisfy initial ratings 1.5CV (mA) or below Within 20% of initial value Satisfy initial ratings Satisfy initial ratings
No terminal damage Satisfy initial ratings No obvious abnormality Over 3/4 of the terminal should be covered by the new solder Capacitance ESR Current (30 minutes value) Appearance Capacitance ESR Current (30 minutes value) Appearance Capacitance Satisfy initial ratings No obvious abnormality Satisfy initial ratings No obvious abnormality Within 20% of initial value Not to exceed 120% of initial ratings Not to exceed 120% of initial ratings No obvious abnormality Within 30% of initial value Below 200% of initial ratings Below 200% of initial ratings No obvious abnormality
Solderability
Temperature cycle
ESR Current (30 minutes value) Appearance Capacitance ESR Current (30 minutes value) Appearance
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2013.06.19 9565SCAVOL13E1306H1
6.5 FY Series
Dimensions
H MAX. H 0.5 for FYL MIN.
Markings on sleeve
D 0.5
0.3 MIN.
Sleeve
FYD Type
Specications
Part Number FYD0H223ZF FYD0H473ZF FYD0H104ZF FYD0H224ZF FYD0H474ZF FYD0H105ZF FYD0H145ZF FYD0H225ZF MAX operating voltage Vdc 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 Nominal capacitance
Charge system (F)
MAX Voltage MAX ESR current at holding at 1 kHz Discharge 30 min. characteristics system (F) mA V 0.033 0.070 0.14 0.35 0.75 1.6 2.1 3.3 220 220 100 120 65 35 45 35 0.033 0.071 0.15 0.33 0.71 1.5 2.1 3.3 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2
Dimension (unit:mm) D 11.5 11.5 13.0 14.5 16.5 21.5 21.5 28.5 H 8.5 8.5 8.5 15.0 15.0 16.0 19.0 22.0 P 5.08 5.08 5.08 5.08 5.08 7.62 7.62 10.16 2.7 2.7 2.2 2.4 2.7 3.0 3.0 6.1 d1 0.4 0.4 0.4 0.4 0.4 0.6 0.6 0.6 d2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.4
FYH Type
Specications
Part Number FYH0H223ZF FYH0H473ZF FYH0H104ZF FYH0H224ZF FYH0H474ZF FYH0H105ZF MAX operating voltage Vdc 5.5 5.5 5.5 5.5 5.5 5.5 Nominal capacitance
Charge system (F)
MAX Voltage MAX ESR current at holding at 1 kHz Discharge 30 min. characteristics system (F) mA V 0.033 0.075 0.16 0.30 0.70 1.5 200 100 50 60 35 20 0.033 0.071 0.15 0.33 0.71 1.5 4.2 4.2 4.2 4.2 4.2 4.2
Dimension (unit:mm) D 11.5 13.0 16.5 16.5 21.5 28.5 H 7.0 7.0 7.5 9.5 10.0 11.0 P 5.08 5.08 5.08 5.08 7.62 10.16 2.7 2.2 2.7 2.7 3.0 6.1 d1 0.4 0.4 0.4 0.4 0.6 0.6 d2 1.2 1.2 1.2 1.2 1.2 1.4
FYL Type
Specications
Part Number FYL0H103ZF FYL0H223ZF FYL0H473ZF MAX operating voltage Vdc 5.5 5.5 5.5 Nominal capacitance
Charge system (F) Discharge at 1 kHz 30 min. system (F)
MAX ESR
Dimension (unit:mm) D 11.0 11.0 12.0 H 5.0 5.0 5.0 P 5.08 5.08 5.08 2.7 2.7 2.7 d1 0.2 0.2 0.2 d2 1.2 1.2 1.2
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2013.06.19 9565SCAVOL13E1306H1
Specications
Category temperature range MAX operating voltage Capacitance Capacitance allowance ESR Current (30-minutes value) Capacitance ESR Current (30 minutes value) Item Series name FY type (FYD, FYH, FYL) 25 to 70 5.5Vdc Refer to standard ratings 80 , 20 FYD0.022F to 2.2F FYH0.022F to 1.0F FYL 0.010F to 0.047F Refer to Measurement Conditions Refer to Measurement Conditions Measured at 1kHz, 10mA ; See also Measurement Conditions Surge voltage6.3V Charge30 sec. Discharge9min 30sec. Number of cycles1000 Series resistance 0.010F 0.022F 0.047F 0.068F 0.10F 0.22F 0.47F 1.0F, 1.4F 2.2F Discharge resistance0 Temperature702 Refer to Measurement Conditions Test conditions (conforming to JIS C 5160-1)
More than 90% of initial ratings Not to exceed 120% of initial ratings Not to exceed 120% of initial ratings
Capacitance ESR Capacitance ESR Capacitance ESR Current (30 minutes value) Capacitance ESR Current (30 minutes value) Capacitance ESR Current (30 minutes value) Appearance
50% or higher than initial value 400% or less than initial value
Phase 6
200% or less than initial value Satisfy initial ratings 1.5CV (mA) or below Within 20% of initial value Satisfy initial ratings Satisfy initial ratings
Conforms to 4.9 Conforms to 4.13 Frequency10 to 55 Hz Testing time6 hours Conforms to 4.11 Solder temp2455 Dipping time50.5 sec. 1.6mm from the bottom should be dipped. Conforms to 4.10 Solder temp26010 Dipping time101 sec. 1.6mm from the bottom should be dipped. Conforms to 4.12 Temperature condition25 Room temperature 70 Room temperature Number of cycles5 Cycles Conforms to 4.14 Temperature402 Relative humidity90 to 95 RH Testing time2408 hours Conforms to 4.15 Temperature702 Voltage appliedMAX operating voltage Series protection resistance0 48 Testing time1000 0Hours Charging condition Voltage applied5.0Vdc (Terminal at the case's side be negative) Series resistance0 Charging time24 hours Let stand for 24 hours in condition described below with terminals opened. Ambient temperatureLower than 25 Relative humidityLower than 70%RH
No obvious abnormality Over 3/4 of the terminal should be covered by the new solder
Solderability Capacitance ESR Current (30 minutes value) Capacitance ESR Current (30 minutes value) Appearance Capacitance High temp. and high humidity resistance ESR Current (30 minutes value) Appearance Capacitance High temperature load ESR Current (30 minutes value) Appearance Appearance
Satisfy initial ratings No obvious abnormality Satisfy initial ratings No obvious abnormality Within 20% of initial value Not to exceed 120% of initial ratings Not to exceed 120% of initial ratings No obvious abnormality Within 30% of initial value Below 200% of initial ratings Below 200% of initial ratings No obvious abnormality
Temperature cycle
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2013.06.19 9565SCAVOL13E1306H1
6.6 FR Series
Dimensions
D 0.5
MIN. H MAX.
Markings on sleeve
Date code
0.3 MIN.
Serial number
Sleeve
Specications
Part Number FR0H223ZF FR0H473ZF FR0H104ZF FR0H224ZF FR0H474ZF FR0H105ZF MAX operating voltage Vdc 5.5 5.5 5.5 5.5 5.5 5.5 Nominal capacitance
Charge system (F)
MAX Voltage MAX ESR current at holding at 1 kHz Discharge 30 min. characteristics system (F) mA V 0.028 0.060 0.15 0.33 0.75 1.6 220 110 150 180 100 60 0.033 0.071 0.15 0.33 0.71 1.5 4.2 4.2 4.2 4.2 4.2 4.2
Dimension (unit:mm) D 11.5 14.5 14.5 14.5 16.5 21.5 H 14.0 14.0 15.5 21.0 21.5 22.0 P 5.08 5.08 5.08 5.08 5.08 7.62 2.7 2.4 2.4 2.4 2.7 3.0 d1 0.4 0.4 0.4 0.4 0.4 0.6 d2 1.2 1.2 1.2 1.2 1.2 1.2
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2013.06.19 9565SCAVOL13E1306H1
Specications
Item Category temperature range MAX operating voltage Capacitance Capacitance allowance ESR Current (30-minutes value) Capacitance ESR Current (30 minutes value) Series name 40 to 85 5.5Vdc 0.022F to 1.0F 80 , 20 Refer to standard ratings Refer to standard ratings More than 90% of initial ratings Not to exceed 120% of initial ratings Not to exceed 120% of initial ratings Refer to Measurement Conditions Refer to Measurement Conditions Measured at 1kHz, 10mA ; See also Measurement Conditions Surge voltage6.3V (5.5V type) Charge30 sec. Discharge9min 30sec. Number of cycles1000 Series resistance 0.022F 0.047F 0.068F 0.10F 0.22F 0.47F 1.0F Discharge resistance0 Temperature702 Conforms to 4.17 Phase1252 Phase2252 Phase3402 Phase4252 Phase5702 Phase6252 Conforms to 4.9 Conforms to 4.13 Frequency10 to 55 Hz Testing time6 hours Conforms to 4.11 Solder temp2455 Dipping time50.5 sec. 1.6mm from the bottom should be dipped. Conforms to 4.10 Solder temp26010 Dipping time101 sec. 1.6mm from the bottom should be dipped. Conforms to 4.12 Temperature condition40 Room temperature 85 Room temperature Number of cycles5 Cycles Conforms to 4.14 Temperature402 Relative humidity90 to 95 RH Testing time2408 hours Conforms to 4.15 Temperature852 Voltage appliedMAX operating voltage Series protection resistance0 48 Testing time1000 0Hours Charging condition Voltage between terminal leads higher than 4.2V Storage Voltage applied5.0Vdc (Terminal at the case's side be negative) Series resistance0 Charging time24 hours Let stand for 24 hours in condition described below with terminals opened. Ambient temperatureLower than 25 Relative humidityLower than 70%RH Refer to Measurement Conditions FR type Test conditions (conforming to JIS C 5160-1)
Capacitance ESR Capacitance ESR Capacitance ESR Current (30 minutes value) Capacitance ESR Current (30 minutes value) Capacitance ESR Current (30 minutes value) Appearance
Phase 6
50% or higher than initial value 400% or less than initial value 30% or higher than initial value 700% or less than initial value 200% or less than initial value Satisfy initial ratings 1.5CV (mA) or below Within 20% of initial value Satisfy initial ratings Satisfy initial ratings
No terminal damage Satisfy initial ratings No obvious abnormality Over 3/4 of the terminal should be covered by the new solder Capacitance ESR Current (30 minutes value) Appearance Capacitance ESR Current (30 minutes value) Appearance Capacitance Satisfy initial ratings No obvious abnormality Satisfy initial ratings No obvious abnormality Within 20% of initial value Not to exceed 120% of initial ratings Not to exceed 120% of initial ratings No obvious abnormality Within 30% of initial value Below 200% of initial ratings Below 200% of initial ratings No obvious abnormality
Solderability
Temperature cycle
ESR Current (30 minutes value) Appearance Capacitance ESR Current (30 minutes value) Appearance
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2013.06.19 9565SCAVOL13E1306H1
6.7 FS Series
Dimensions
D 0.5
MIN. H MAX.
Markings on sleeve
Date code
0.3 MIN.
Serial number
Sleeve
Specications
Part Number FS0H223ZF FS0H473ZF FS0H104ZF FS0H224ZF FS0H474ZF FS0H105ZF FS1A474ZF FS1A105ZF FS1B105ZF FS1B505ZF MAX operating voltage Vdc 5.5 5.5 5.5 5.5 5.5 5.5 11.0 11.0 12.0 12.0 Nominal capacitance
Charge system (F) Discharge system (F)
MAX ESR MAX current at 1 kHz at 30 min. mA 60.0 40.0 25.0 25.0 13.0 7.0 7.0 7.0 7.5 4.0 0.033 0.071 0.15 0.33 0.71 1.5 1.41 3.0 3.6 18.0
Dimension (unit:mm) D 11.5 13.0 16.5 16.5 21.5 28.5 28.5 28.5 28.5 44.8 H 8.5 8.5 8.5 13.0 13.0 14.0 25.5 31.5 38.0 60.0 P 5.08 5.08 5.08 5.08 7.62 10.16 10.16 10.16 10.16 20.00 2.7 2.2 2.7 2.7 3.0 6.1 6.1 6.1 6.1 9.5 d1 0.4 0.4 0.4 0.4 0.6 0.6 0.6 0.6 0.6 1.0 d2 1.2 1.2 1.2 1.2 1.2 1.4 1.4 1.4 1.4 1.4
0.022 0.047 0.10 0.22 0.47 1.0 0.47 1.0 1.0 5.0
0.033 0.072 0.15 0.33 0.75 1.3 0.60 1.3 1.3 6.5
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2013.06.19 9565SCAVOL13E1306H1
Specications
Item Category temperature range MAX operating voltage Capacitance Capacitance allowance ESR Current (30-minutes value) Capacitance ESR Current (30 minutes value) Series name 25 to 70 5.5Vdc, 11Vdc, 12Vdc 5.5V0.022F to 1.0F 11V0.47, 1.0 12V1.0F, 5.0F 80 , 20 Refer to Measurement Conditions Refer to Measurement Conditions Measured at 1kHz, 10mA ; See also Measurement Conditions Surge voltage6.3V (5.5V type) 12.6V (11V type) 13.6V (12V type) Charge30 sec. Discharge9min 30sec. Number of cycles1000 Series resistance 0.022F 0.047F 0.10F 0.22F 0.47F 1.0F 5.0F Discharge resistance0 Temperature702 Refer to Measurement Conditions FS type Test conditions (conforming to JIS C 5160-1)
5.5V0.0022F to 1.0F 11V0.47F, 1.0F 12V1.0F, 5.0F Refer to standard ratings More than 90% of initial ratings Not to exceed 120% of initial ratings Not to exceed 120% of initial ratings
Capacitance ESR Capacitance ESR Capacitance ESR Current (30 minutes value) Capacitance ESR Current (30 minutes value) Capacitance ESR Current (30 minutes value) Appearance
50% or higher than initial value 300% or less than initial value
Phase 6
150% or less than initial value Satisfy initial ratings 1.5CV (mA) or below Within 20% of initial value Satisfy initial ratings Satisfy initial ratings
No terminal damage Satisfy initial ratings No obvious abnormality Over 3/4 of the terminal should be covered by the new solder Capacitance ESR Current (30 minutes value) Appearance Capacitance ESR Current (30 minutes value) Appearance Capacitance Satisfy initial ratings No obvious abnormality Satisfy initial ratings No obvious abnormality Over 90% of the initial value (5.5V type) Within 20% of initial value (11V type, 12Vtype) Not to exceed 120% of initial ratings Not to exceed 120% of initial ratings No obvious abnormality Over 85% of the initial value (5.5V type) Within 20% of initial value (11V type, 12Vtype) Below 200% of initial ratings Below 200% of initial ratings No obvious abnormality
Conforms to 4.9 Conforms to 4.13 Frequency10 to 55 Hz Testing time6 hours Conforms to 4.11 Solder temp2455 Dipping time50.5 sec. 1.6mm from the bottom should be dipped. Conforms to 4.10 Solder temp26010 Dipping time101 sec. 1.6mm from the bottom should be dipped. Conforms to 4.12 Temperature condition25 Room temperature 70 Room temperature Number of cycles5 Cycles Conforms to 4.14 Temperature402 Relative humidity90 to 95 RH Testing time2408 hours Conforms to 4.15 Temperature702 Voltage appliedMAX operating voltage Series protection resistance0 48 Testing time1000 0Hours
Solderability
Temperature cycle
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2013.06.19 9565SCAVOL13E1306H1
Dimensions
H MAX.
Markings on sleeve
D 0.5
MAX.
Date code
2.0 MAX.
A1 001 A1 001
FA FA
Serial number
5V 0.1 F 5V 0.1 F
FA FA
5V 0.1 F 5V 0.1 F
Sleeve
P 0.5
Specications
Part Number FA0H473ZF MAX operating voltage Vdc 5.5 5.5
Terminal
Nominal capacitance
Charge system (F)
MAX ESR
Dimension (unit:mm) D 21.5 16.0 H 15.5 15.5 P 7.6 5.1 5.5 5.0 d1 0.6 0.4 d2 1.2 1.2
Weight g 6.2 25 12
FA0H474ZF
FA0H224ZF
FA0H104ZF
FA1A474ZF
FA1A224ZF
11.0
11.0
11.0
11.0
5.5
5.5
5.5
10
10
10
10
0.47
0.75
2.5
3.5
0.71
0.47
0.75
4.0
1.41
44.5
36.5
28.5
16.0
44.5
36.5
28.5
28.5
27.5
25.5
25.0
18.5
16.5
16.5
15.0
10.2
20.0
15.0
9.5
9.5
9.5
5.0
9.5
9.5
9.5
1.0
1.0
0.6
0.4
1.0
0.6
0.6
1.4
1.4
1.4
1.2
1.4
1.7
1.4
7.5 55 32
65
42
83
FE Series
Dimensions
H MAX.
MIN.
D 0.5
Markings on sleeve
0.3 MIN.
Sleeve
P 0.5
d1 0.1 d2 0.1
Specications
Part Number FE0H473ZF
Terminal
Nominal capacitance
Charge system (F) Discharge system (F)
MAX ESR MAX current at 1 kHz at 30 min. mA 14.0 6.5 3.5 1.8 1.0 0.6 0.071 0.15 0.33 0.71 1.5 2.3
Dimension (unit:mm) D 14.5 16.5 21.5 28.5 36.5 44.5 H 14.0 14.0 15.5 16.5 18.5 18.5 P 5.1 5.1 7.6 2.2 2.7 3.0 6.1 6.1 6.1 d1 0.4 0.4 0.6 0.6 0.6 1.0 d2 1.2 1.2 1.2 1.4 1.7 1.4
FE0H104ZF
FE0H224ZF
5.5
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2013.06.19 9565SCAVOL13E1306H1
Specications
Item Category temperature range MAX operating voltage Capacitance Capacitance allowance ESR Current (30-minutes value) Capacitance ESR Current (30 minutes value) Series name FA 25 to 70 5.5Vdc, 11Vdc 5.5V0.047F to 1.0F 11V0.022F to 0.47F 80 , 20 Refer to standard ratings Refer to standard ratings 5.5Vdc 0.047F to 1.5F 80 , 20 Refer to standard ratings Refer to standard ratings More than 90% of initial ratings Not to exceed 120% of initial ratings Not to exceed 120% of initial ratings Refer to Measurement Conditions Refer to Measurement Conditions Measured at 1kHz, 10mA ; See also Measurement Conditions Refer to Measurement Conditions Surge voltage6.3V (5.5V type) 12.6V (11V type) Charge30 sec. Discharge9min 30sec. Number of cycles1000 Series resistance 0.047F 0.10F 0.22F 0.47F 1.0F, 1.5F Discharge resistance0 Temperature702 Conforms to 4.17 Phase1252 Phase2252 Phase3402 (FE type) Phase4252 Phase5702 Phase6252 Conforms to 4.9 Conforms to 4.13 Frequency10 to 55 Hz Testing time6 hours Conforms to 4.11 Solder temp2455 Dipping time50.5 sec. 1.6mm from the bottom should be dipped. Conforms to 4.10 Solder temp26010 Dipping time101 sec. 1.6mm from the bottom should be dipped. Conforms to 4.12 Temperature condition25 (40 for FE type) Room temperature 70 Room temperature Number of cycles5 Cycles Conforms to 4.14 Temperature402 Relative humidity90 to 95 RH Testing time2408 hours Conforms to 4.15 Temperature702 Voltage appliedMAX operating voltage Series protection resistance0 48 Testing time1000 0Hours FE 40 to 70 Test conditions (conforming to JIS C 5160-1)
300 150 56 30 15
Capacitance ESR Capacitance ESR Capacitance ESR Current (30 minutes value) Capacitance ESR Current (30 minutes value) Capacitance ESR Current (30 minutes value) Appearance
Phase 3 Phase 5
Phase 2
70% or higher than initial value 300% or less than initial value
Phase 2
Phase 6
150% or less than initial value Satisfy initial ratings 1.5CV (mA) or below Within 20% of initial value Satisfy initial ratings Satisfy initial ratings
Phase 3
Phase 5 Phase 6
40% or higher than initial value 400% or less than initial value 200% or less than initial value Satisfy initial ratings 1.5CV (mA) or below Within 20% of initial value Satisfy initial ratings Satisfy initial ratings
No terminal damage Satisfy initial ratings No obvious abnormality Over 3/4 of the terminal should be covered by the new solder
No terminal damage Satisfy initial ratings No obvious abnormality Over 3/4 of the terminal should be covered by the new solder Satisfy initial ratings No obvious abnormality Satisfy initial ratings No obvious abnormality Within 20% of initial value Not to exceed 120% of initial ratings Not to exceed 120% of initial ratings No obvious abnormality Within 30% of initial value Below 200% of initial ratings Below 200% of initial ratings No obvious abnormality
Solderability Capacitance ESR Current (30 minutes value) Appearance Capacitance ESR Current (30 minutes value) Appearance Capacitance High temp. and high humidity resistance ESR Current (30 minutes value) Appearance High temperature load Capacitance ESR Current (30 minutes value) Appearance
Satisfy initial ratings No obvious abnormality Satisfy initial ratings No obvious abnormality Over 90% of initial value Not to exceed 120% of initial ratings Not to exceed 120% of initial ratings No obvious abnormality Over 85% of initial value Below 120% of initial ratings Below 200% of initial ratings No obvious abnormality
Temperature cycle
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2013.06.19 9565SCAVOL13E1306H1
HV
Positive terminal
Dimensions
1 818
d D F0.5
15Min.
5Min.
2 2535
D1Max.
L2Max.
6.31
Terminal Details
0.90.1 Thickness 0.8t 2.6 150.1 6.8 7.5
2.1
Standard models
Part Number HVZ0E105NF HVZ0E275NF HVZ0E475NF HVZ0E106NF HVZ0E226NF HVZ0E506NF HVZ0E107NF-LT HVZ0E207NF-LT MAX operating voltage Vdc 2.7 2.7 2.7 2.7 2.7 2.5 2.7 2.7 Nomical capacitance F 1.0 2.7 4.7 10.0 22.0 50.0 100.0 200.0 MAX ESR MAX current at 1kHz at 30 min. m mA 300 300 100 100 100 50 30 30 0.8 2.2 3.8 8.0 18.0 40.0 81.0 162.0 Dimension (unit:mm) D 8.0 8.0 10.0 10.0 12.5 18.0 25.0 35.0 L 12.0 22.0 20.0 35.0 35.0 40.0 50.0 50.0 F 3.5 3.5 5.0 5.0 5.0 7.5 d 0.6 0.6 0.6 0.6 0.6 0.8 0.5 0.5 0.5 0.5 0.5 0.5 2.0 2.0 2.0 2.0 2.0 2.0 Weight g 1.0 1.9 2.5 4.0 10.0 14.0 28.0 61.5
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2013.06.19 9565SCAVOL13E1306H1
Specications
Items Operating Temperature Range Maximum Operating Voltage Nominal Capacitance Capacitance Allowance Equivalent Series Resistance (ESR) Current at 30 minutes Temperature Capacitance variation of ESR characteristic Phase Capacitance 4 ESR Current at 30min Phase Capacitance 5 ESR Current at 30min Lead strength Vibration Resistance Capacitance ESR Current at 30min Appearance Solderability Specication 25 60 (22F, 50F, 100F, 200F) 25 70 (1.0F, 2.7F, 4.7F, 10F) 2.7Vdc (50F type has 2.5Vdc) 1.0F, 2.7F, 4.7F, 10F, 22F, 50F, 100F, 200F 30% Showing Standard list Showing Standard list More than 70% of initial value Not exceed 5 times of initial value Not exceed 150% of initial value Meet initial standard value Not exceed 1.5CV(mA) Within 20% of initial Meet initial standard value Meet initial standard value No pin disconnection Meet initial standard value Test Condition Conforming JIS C 5160- 2
Conforms to 4.5 Conforms to 4.9 Frequency :1055Hz Test Duration :6 hours Conforms to 4.7 Temperature: 2455 , Time: 50.5second Should be dipped up to 1.6mm from lower end of Capacitor Conforms to 4.6 Temperature: 2455 , Time: 50.5second Should be dipped up to 1.6mm from lower end of Capacitor Conforms to 4.8 25 Room TempMax. Temp.Room Temp 5 cycles * Max. Temperature Conforms to 4.14 402 9090%RH, 2408hours Conforms to 4.10 Max. Operation temperature 2 Max. Operating Voltage Series protection resistance : 0 48 10001000 0hours Max Operation Temp
No obvious abnormality 3/4 or more of pin surface Should be covered with new solder Meet initial standard value
Temperature Cycle
Capacitor ESR Current at 30minutes Appearance Capacitor ESR Current at 30minutes Appearance Capacitor ESR Current at 30minutes Appearance Capacitor ESR Current at 30minutes Appearance
No obvious abnormality Within 20% of initial value Not exceed 1.5 times of initial value Not exceed 1.5 times of initial value No obvious abnormality Within 30% of initial value Not exceed 2 times of initial value Not exceed 2 times of initial value No obvious abnormality
Humidity Resistance
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2013.06.19 9565SCAVOL13E1306H1
7. Packing
1. FM Series
(1) Bulk
Packing methodPack in vinyl bags then pack them into cardboard boxes. Standard packing quantity1000pcs (100pcs / vinyl bag10) HoweverFM0H104ZF-L1 and FM0H224ZF-L1800pcs, FMC0H334ZF400pcs, FMC0H334ZF-L1300pcs
(2) Taping
2. FC Series
Part name FC0H473ZFTBR24 FC0H104ZFTBR24 FC0H224ZFTBR24 FC0H474ZFTBR32-SS FC0H105ZFTBR44-SS FC0V104ZFTBR24 FC0V224ZFTBR24 FC0V474ZFTBR24 FCS0H473ZFTBR24 FCS0H104ZFTBR24 FCS0H224ZFTBR24 FCS0V104ZFTBR24 FCS0V224ZFTBR24 FCS0V474ZFTBR24
Packing unit 1000 PCS. / reel 1000 PCS. / reel 500 PCS. / reel 200 PCS. / reel 150 PCS. / reel 1000 PCS. / reel 1000 PCS. / reel 500 PCS. / reel 1000 PCS. / reel 1000 PCS. / reel 500 PCS. / reel 1000 PCS. / reel 1000 PCS. / reel 500 PCS. / reel
UnitPises
800 400 400 300 240 FG 2000 2000 2000 1600 800 300 240 1000 400 400 FT
400 400
Packing method: Pin the terminal onto a conductive mat; then pack it into individual cardboard box with insulation material. Standard packing quantity: see chart below. UnitPises
Series name FA 5.5V type 11V type Capacitance 0.10F 90 50 0.22F 50 30 0.47F 30 20 1.0F 20 1.4F 1.5F 2.2F 3.3F 4.7F 5.0F 5.6F FE 90 50 30 20 FS 5.5V type 11V type, 12V type 90 50 50 50 20 FYD 90 90 50 FY FYH 90 50 FYL FR 90 160 90 50 FG FT 90 50 30 20
Packing methodPack in vinyl bags then pack them into cardboard boxes. Standard packing quantity10,000pcs(1F), 5,000pcs(2.7F, 4.7F), 4,000pcs(10F), 1,500pcs(22F), 750pcs(50F), 200pcs(100F, 200F)
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2013.06.19 9565SCAVOL13E1306H1
b. SUS nickel base copper base reow lead-free solder plating (100% Sn, reow processed) c. Iron copper base lead-free solder plating (100% Sn)
Series FA FE FS FR FT FY Part Number All FA Series All FE Series All FS Series All FR Series All FT Series All FYD type All FYH type FYL0H473ZF FYL0H223ZF FYL0H103ZF FG0H103ZF FG0H223ZF FG0H473ZF FG0H104ZF FG0H224ZF FG0H474ZF FG0H105ZF FG0H225ZF FG0H475ZF FGH0H104ZF FGH0H224ZF FGH0H474ZF FGH0H105ZF All FGR type All FM Series FC0H473ZFTBR24 FC0H104ZFTBR24 FC0H224ZFTBR24 FC0H474ZFTBR32-SS FC0H105ZFTBR44-SS FC0V104ZFTBR24 FC0V224ZFTBR24 FC0V474ZFTBR24 FCS0H473ZFTBR24 FCS0H104ZFTBR24 FCS0H224ZFTBR24 FCS0V104ZFTBR24 FCS0V224ZFTBR24 FCS0V474ZFTBR24 All HV Series Plating a a a a a a a a b b b b b b a a a a a b b a a a a b b b a a b b b b b b b b b c Sleeve PET (Blue) PET (Blue) PET (Blue) PET (Blue) PET (Blue) PET (Blue) PET (Blue) PET (Blue) PET (Blue) PET (Blue) PETBlue PETBlue PETBlue PETBlue PETBlue PETBlue PETBlue PETBlue PETBlue PETBlue PETBlue PETBlue PETBlue PETBlue No tube used No tube used No tube used No tube used No tube used No tube used No tube used No tube used No tube used No tube used No tube used No tube used No tube used No tube used No tube used PET (Blue)
FG
FM
FC
HV
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2013.06.19 9565SCAVOL13E1306H1
9. Measurement Conditions
(1) Capacitance ( Charge System )
Capacitance is calculated from expression (9) by measuring the charge time constant ( ) of the capacitor (C). Prior to measurement, short between both pins of the capacitor for 30 minutes or more to let it discharge. In addition, follow the indication of the product when determining the polarity of the capacitor during charging. Capacitance: C = RC (F) (9) 3.5 V 5.5 V 6.5 V 11 V EO: 3.0 (V) Product with maximum operating voltage 5.0 (V) Product with maximum operating voltage 6.0 (V) Product with maximum operating voltage 10.0 (V) Product with maximum operating voltage
VC
Swich EO RC
+
12.0 (V) Product with maximum operating voltage : Time from start of charging until Vc becomes RC: See table below (). 0.632E0 (V) (sec) 12 V
0.010F 0.022F 0.033F 0.047F 0.10F 0.22F 0.33F 0.47F 1.0F 1.4F 1.5F 2.2F 3.3F 4.7F 5.0F 5.6F
FY FR FYD FYH FYL 5000 1000 1000 2000 2000 2000 2000 1000 1000 1000 2000 1000 2000 1000 510 510 510 1000 510 1000 FA FE FS 200 100 51 200 100 51 51 200 100 100 100 510 200 100 200 100 510 200 100 510 200 100
*Capacitance values according to the constant current discharge method. *HV series capacitance is measured by discharge system.
FM, FME FMR, FML 5000 2000 Discharge 2000 1000 0H: Discharge 0V: 1000
FG FGH FGR 5000 2000 1000 2000 1000 1000 Discharge FMC 1000 Discharge Discharge 1000 Discharge 510 Discharge 510 200 100
In the diagram below, charging is performed for a duration of 30 minutes, once the voltage of the condensor terminal Then, use a constant current load device and measure the time for the terminal voltage to drop from 3.0 to 2.5 V upon discharge at 0.22 mA for 0.22 F, for example, and calculate the static capacitance according to the equation shown below. Note: The current value is 1 mA discharged per 1F.
SW 0.22mA(I) A
5.5V
Voltage
V1 : 3.0V V1 : 2.5V
CapactanceC
I(T2T1) V1V2
V1 V2
(F)
5.5V
30 min.
T1
T2
Duration (sec.)
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2013.06.19 9565SCAVOL13E1306H1
In the diagram below, charging is performed for a duration of 30 minutes, once the voltage of the capacitor terminal reaches 3.5V. Then, use a constant current load device and measure the time for the terminal voltage to drop from 1.8 to 1.5V upon discharge at 1 mA per 1F, and calculate the static capacitance according to the equation shown below.
SW
(V) 3.5V V1 V2 V1 : 1.8V V2 : 1.5V
I(T2T1) V1V2
A R
(F)
3.5V
T1 30 minutes
T2
Time (sec.)
In the diagram below, charging is performed for a duration of 30 minutes, once the voltage of the capacitor terminal reaches Max. operating voltage. Then, use a constant current load device and measure the time for the terminal voltage to drop from 2.0 to 1.5V upon discharge at 1 mA per 1F, and calculate the static capacitance according to the equation shown below.
SW
(V) 3.5V V1 V2 V1 : 2.0V V2 : 1.5V
I(T2T1) V1V2
A R
(F)
3.5V
T1 30 minutes
T2
Time (sec.)
ESR
0.01
()
VC
Current shall be calculated from the equation below. Prior to measurement, both lead terminals must be short-circuited for a minimum of 30 minutes. The lead terminal connected to the metal can case is connected to the negative side of the power supply. Eo2.5Vdc (HVseries 50F) 2.7Vdc (HVseries except 50F) 3.0Vdc (3.5V type) 5.0Vdc (5.5V type) Rc1000 (0.010F, 0.022F, 0.047F) 100 (0.10F, 0.22F, 0.47F) 10 (1.0F, 1.5F, 2.2F, 4.7F) 2.2 (HVseries) VR Current (A) RC
VR RC
SW C
EO
The self-discharge characteristic is measured by charging a voltage of 5.0 Vdc (charge protection resistance: 0) according to the capacitor polarity for 24 hours, then releasing between the pins for 24 hours and measuring the pin-to-pin voltage. The test should be carried out in an environment with an ambient temperature of 25 or below and relative humidity of 70% RH or below. Super Capacitors Vol.13 37
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2013.06.19 9565SCAVOL13E1306H1
10.
1. Circuitry design
1.1 Useful life
The electrical double layered capacitor (super capacitor) uses electrolyte and is sealed with rubber etc. Water in the electrolyte can evaporate in use over long periods at high temperatures, thus reducing electrostatic capacity which in turn will it is used in. Therefore, controlling the usage environment will ensure prolonged life of the part. Basic breakdown mode is an open mode due to increased internal resistance. create greater internal resistance. The characteristics of the super capacitor can vary greatly depending on the environment
Based on eld data, the fail rate is calculated at approx. 0.006Fit. We estimate that unreported failures are ten times this amount. Therefore, we assume that the fail rate is below 0.06Fit.
Performance may be compromised, and in some cases leakage or damage may occur if applied voltage exceeds maximum
As super capacitors contain a high level of internal resistance, they are not recommended for use as electrical smoothing Performance may be compromised, and in some cases leakage or damage may occur if a super capacitor is used in ripple
As applied voltage balance to each super capacitor is lost when used in series connection, excess voltage may be applied to some super capacitors, which will not only negatively affect its performance but may also cause leakage and/or damage. pressure resistor/voltage divider) when using super capacitors in series connection. Allow ample margin for maximum voltage or attach a circuit for applying equal voltage to each super capacitor (partial Also, arrange super capacitors so that the temperature between each capacitor will not vary.
The outer sleeve wrapped around the super capacitor indicates that it is sealed, however the outer sleeve is not guaranteed for insulation purposes. Therefore, it cannot be used where insulation is necessary.
The super capacitor is manufactured so that the terminal on the outer case is negative (-). Align the (-) symbol during use. Even though discharging has been carried out prior to shipping, any residual electrical charge may negatively affect other parts.
Useful life of the super capacitor will be signicantly affected if used near heat emitting items (coils, power transistors, and posistors etc) where the super capacitor itself may become heated.
This device cannot be used in any acidic, alkaline or similar type of environment. 38 Super Capacitors Vol.13
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2013.06.19 9565SCAVOL13E1306H1
HV series super capacitors are tted with pressure valves Make an opening in the top of the pressure valve to avoid any of 18mm or less, and at least a 3mm opening for models with a diameter of 22mm.
damage to the super capacitor when the pressure valve is in use. Allow at least a 2mm opening for models with a diameter
2. Mounting
Except for the FC series, it is not possible to mount this capacitor onto an IR / VPS reow furnace. Do not immerse the
Keep solder under 260 and soldering time to within 10 seconds when using the ow automatic soldering method. (Except
Care must be taken to prevent the soldering iron from touching other parts when soldering. Keep the tip of the soldering iron capacitor resistance is likely to increase if the terminals are overheated.
under 400 and soldering time to within 3 seconds. Always make sure that the temperature of the tip is controlled. Internal
Do not attempt to bend or polish the capacitor terminals with sand paper etc. Soldering may not be possible if the metallic plating is removed from the top of the terminals.
Except for the FM series, cleaning, coating, and potting must not be carried out. Consult us if this type of procedure is Terminals should be dried at less than the maximum operating temperature after cleaning.
3. Storage
Make sure that the super capacitor is stored according to the following conditions: Temp.: 535 (Standard 25), Humidity: 2070% (Standard: 50%). Do not allow the build up of condensation through sudden temperature change.
Make sure that there are no corrosive gasses like sulfur dioxide as penetration of the lead terminals is possible. Always store this item in an area with low dust and dirt levels. Make sure that the packaging will not be deformed through heavy loading, movement and/or knocks. Keep out of direct sunlight, and away from radiation, static electricity, and magnetic elds.
This item may be stored up to one year from the date of delivery if stored at the conditions stated above. conditions, we recommend that the soldering is checked.
This product should be safe to use even after being stored for over a 1 year period. However, depending on the storage
4. Dismantling
There is a small amount of electrolyte stored within thecapacitor. Do not attempt to dismantle as direct skin contact with the electrolyte will cause burning. This product should be treated as industrial waste and not is not to be disposed of by re.
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2013.06.19 9565SCAVOL13E1306H1
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2013.06.19 9565SCAVOL13E1306H1
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2013.06.19 9565SCAVOL13E1306H1
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2013.06.19 9565SCAVOL13E1306H1
(2)
(3)
Unless otherwise shown, the quality level of NEC TOKINs electronic component products included in documents such as catalogues, data sheets or data books is the standard quality level. This manual is subject to change without notice. The contents of this manual are based on data which is correct as of June 2013, and they may be changed without notice. If our products are used for mass-production design, please cousult with a member of our companys sales staff by way of precaution. R eprinting and copying of this manual without prior written permission from NEC TOKIN Corporation are not permitted. Industrial property problems n the event any problems associated with industrial property of a third party arising as a result of I the use of our products, NEC TOKIN assumes no responsibility for problems other than problems directly associated with the constitution and manufacturing method of the products. Should any of these products come under the category of strategic goods or services (according to Japans foreign trade and foreign exchange regulations), the sender must obtain an export license from the Japanese Government befor said products can be exported outside Japan.
(4) (5)
(6)
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2013.06.19 9565SCAVOL13E1306H1