Anda di halaman 1dari 118
AS/NZS 4600:1996 Australian/New Zealand Standard® Cold-formed steel structures by BHP BILLITON on 27 ‘Accessed by BHP BILLITON on 27 Jun 2002 ASINZS 4600:1996 ‘This Joint Australian/New Zealand Standard was prepared by Joint ‘Technical Committee BD/82, Cold-formed Steel Structures. It was approved on behalf of the Council of Standards Australia on 4 October 1996 and on Bebalf of the Council of Standards New Zealand on 4 October 1996. It was published on 5 December 1996. ‘The following interests are represented on Committee BD/82: Association of Consulting Engineers, Australia ‘Australian Chamber of Commerce and Industry. ‘Australian Institute of Steel Construction Bureau of Steel Manufacturers of Australia, CSIRO, Division of Building, Construction and Engineering, Australia Heavy Engineering Research Association, New Zealand Institution of Professional Engineers of New Zealand ‘Metal Building Products Manufacturers Association, Australia ‘Metal Roofing and Cladding Manufacturers Association, New Zealand ‘Metal Trades Industry Association of Australia University of Queensland, Australie University of Sydney, Australia Welding Technology Institute of Australia Review of Standards. To keep abreast of progress in industry, Joint Australien! New Zealand Standards are subject to periodic review and are kept up to date by the issue ‘of amendments or new editions as necessary. It is important therefore thst Standards users ‘ensure that they are in possession of the latest edition, and any amendments thereto, Full details ofall Joint Standards and related publications will be found in the Standards ‘Australia and Standards New Zealand Catalogue of Publications; this information is ‘supplemented each month by the magazines “The Australian Standard” and "Standards New Zealand’, which subscribing members receive, and which give details of new publications lew editions and amendments, and of withdrawn Standards Suggestions for improvements to Joint Standards, addressed to the head office of either Standards Australia or Standards New Zealand, are welcomed. Netiication of any ‘inaccuracy or arsbiguity found ina Joint Australian/New Zealand Standard should be made ‘without delay in order thatthe matter may be investigated and appropriate action taken. This Standard was issued in draft form for comment as DR 95246, Accessed by BHP BILLITON on 27 Jun 2002 AS/NZS 4600:1996 Australian/New Zealand Standard® Cold-formed steel structures PUBLISHED JOINTLY BY: STANDARDS AUSTRALIA, 1 The Crescent, Homebush NSW 2140 Australia STANDARDS NEW ZEALAND Level 10, Radio New Zealand House, 155 The Terrace, Wellington 6001 New Zealand ISBN 0 7337 0795 5

Anda mungkin juga menyukai