Wartsila Services Version 1.00 Reference PH300 Date 11.29.10 Document No. PR40030/EAA Page 1(3)
2. Prerequisites
The participants in this course should have sufficient experience in the operation and maintenance of diesel engines as well as its system.
3. Course Objective
On completion of this training, the trainees are able to maintain the engine in a safer way and will make more effective contributions to the operation of the engine, this will also improve the participants skills on proper working practices with diesel engines. Enhance knowledge about component stress cause by thermal and mechanical load are also taught.
4. Duration
The standard duration of the Engine Sulzer ZA40S Operation and Practical Advanced is 5 days.
5. Venue
The ENGINE course can be delivered in one of the Wrtsil Land & Sea Academy (WLSA) training centres world-wide, or on board a vessel.
Distribution: Wrtsil Network. Validity: From November 29, 2010 until further notice. Wrtsil Corporation John Stenbergin ranta 2 P.O. Box 196, FI-00531 Helsinki Tel. +358 (0)10 709 0000 Fax +358 (0)10 709 5700 www.wartsila.com V.A.T. FI01286311 Trade Register No. 31.232 Registered Office: Helsinki
Wartsila Services, Version 1.00 Reference PH300 Date 11.29.10 Document No. PR40030/EAA Page 2(3)
Course Specification
6. Main Content
Main Data Design & Function Engine Block, Bearings & Oil Sump Main Bearing Inspections Fuel Injection Equipments, Overhaul and Calibration Cylinder Head Disassembly and Assembly, Overhauling Procedure Pistons and Conn Rods, Disassembly and Assembly Overhaul Procedure and Wear Measurement Hands-on training on Sulzer ZA40S Engine and on engine simulator
Day 2
Main Data of Sulzer ZA40S Discussed / explained engine specifics Familiarization with the Engine
Distribution: Wrtsil Network. Validity: From November 29, 2010 until further notice. Wrtsil Corporation John Stenbergin ranta 2 P.O. Box 196, FI-00531 Helsinki Tel. +358 (0)10 709 0000 Fax +358 (0)10 709 5700 www.wartsila.com V.A.T. FI01286311 Trade Register No. 31.232 Registered Office: Helsinki
Wrtsil Services Version 1.0 Reference PH300 Date 11.10.10 Document No. PR40030/EAA Page 3(3)
Course specification
Design & Function of Sulzer ZA40S Understand the design and function of major components. Also theoretically know how the basic maintenance works are carried out. Engine Block, Bearings & Oil Sump Described construction, system components, oil and water flow, hydraulic jacks and tightening specs, things to remember Main Bearing Inspections Overhauling procedure and safety aspects, Condition evaluation
Day 3
Fuel Injection Equipments, Theoretical Understanding the function and maintenance principles of fuel injection equipment is playing a major role when operating the diesel engine safely and economically. Fuel Injection Equipments, Overhaul and Calibration Hands-on activities on safe and correct procedure of doing overhaul and needed adjustment
Day 4
Cylinder Head Dis-assy & Assembly, Overhauling Procedure Described construction, system components and parts special features Assessment of Different Components Condition evaluation and wear measurements Pistons and Conn Rods, Dis & Assembly Described construction, system components, parts special features Overhaul Procedure and Wear Measurement, Safe and Correct procedure of working on the engine component. Connecting Rod Ovality Calibration, big-end Correct procedure and wear limits to be observed Crankshaft Describe construction and taking alignment.
Distribution: Wrtsil Network. Validity: From November 29, 2010 until further notice. Wrtsil Corporation John Stenbergin ranta 2 P.O. Box 196, FI-00531 Helsinki Tel. +358 (0)10 709 0000 Fax +358 (0)10 709 5700 www.wartsila.com V.A.T. FI01286311 Trade Register No. 31.232 Registered Office: Helsinki
Wrtsil Services Version 1.0 Reference PH300 Date 11.10.10 Document No. PR40030/EAA Page 4(3)
Course specification
Day 5
Liner, Dis-assy and Assembly Safe and correct procedure to be observed, using the right tools. Honing of Liner Liner Wear Calibration Correct procedure and wear limits to be observed. Assembly of major engine components to engine block Discussions, Test and Course Evaluation
Distribution: Wrtsil Network. Validity: From November 29, 2010 until further notice. Wrtsil Corporation John Stenbergin ranta 2 P.O. Box 196, FI-00531 Helsinki Tel. +358 (0)10 709 0000 Fax +358 (0)10 709 5700 www.wartsila.com V.A.T. FI01286311 Trade Register No. 31.232 Registered Office: Helsinki