The Smith Meter Model JB10 Meter is a 10", double-case, straight-through type, rotary vane, positive displacement ow meter and is part of the Crude Transportation (CT) Series of large PD meters. The Crude Transportation series PD Meters incorporate updated design features including lightened blades, fullwidth wear strips, Armalloy coated rollers and cam and tungsten carbide roller pins to provide extended service in harsh crude applications. The Crude Transportation series is suitable for both crude oil and rened product applications such as blending, batching and leak detection as well as traditional custody transfer applications.
Options
High Viscosity Meter Clearances To extend operation at maximum flow rate from 200 mPas to 2,000 mPas. High Temperature Meter Clearances To extend operating temperatures from 125F to 200F (52C to 93C). All Iron Trim For operating temperatures above 200F (93C). LPG Trim For low lubricity liquids such as LPG. NACE Construction Special components available to meet requirements of NACE Standard MR-01-75.
Model JB10-S3
Repeatability 0.02% Viscosity Standard: 200 mPas2 (1,000 SSU) maximum. Optional: 2 Pas (10,000 SSU) maximum - specify High Viscosity Meter Clearances. Over 2 Pas: Specify High Viscosity Meter Clearances and derate maximum flow rate in direct proportion to viscosity over 2 Pas (e.g., at 4 Pas, derate Maximum Flow Rate to 50% of normal continuous rating - 2,150 BPH). Temperature Standard Meter Clearances With: Buna N/Teflon: -20F to 125F (-29C to 52C). Viton: 10F to 125F (-12C to 52C). High Temperature Meter Clearances With: Buna N/Teflon: -20F to 200F (-29C to 93C). Viton: 10F to 200F (-12C to 93C). All Iron Trim With: Buna N: -20F to 225F (-29C to 108C). Teflon: -20F to 400F (-29C to 205C). Viton: 10F to 400F (-12C to 205C). Meter Gearing One barrel or ten dekalitres per revolution of meter calibrator output shaft. Five gallons special.
Operating Specications
Maximum Flow Rate Continuous Rating Standard Trim Continuous Rating All Iron or LPG Trim BPH 4,700 3,525 m3/h 740 550
1 Based on a maximum ow rate of 4,700 BPH (740 m3/h). 2 1,000 mPas = 1,000 cP = 1 Pas.
Flow - Cubic Meters per Hour 0 100 200 300 400 500 600 700 800 Data based on 0.82 sp. gr., 2 mPas product. 40 36 32 28 24 20 16 12 8 4 0 0 1,000 2,000 3,000 4,000 Flow - Barrels per Hour 0 5,000 P kPa
JB10-S3 150 2853 1,9653 JB10-S5 300 300 2,068 JB10-S6 300 7403 5,1023 JB10-S7 600 1,4803 10,2043 JB10-S8 900 2,2203 15,3063 Flange Class per ANSI B16.5 Raised Face Flange.
1.0
Dimensions
Inches (mm)
Model JB10-S3 Through S8
D Lifting Eye Top View Anchor Hole
45
H (Drain) 11.0" (279)
A 11.2" (284)
4.6" (117)
6.0"* (152) C
*Includes cover.
Note: Dimensions inches to the nearest tenth (millimetres to the nearest whole mm), each independently dimensioned from respective engineering drawings. Model JB10-S3 JB10-S5 JB10-S6 JB10-S7 JB10-S8 A 33.0" (838) 33.8" (859) 41.0" (1,041) 44.3" (1,125) 62.7" (1,590) B 22.0" (559) 22.0" (559) 21.9" (556) 21.9" (556) 28.0" (711) C 44.0" (1,118) 44.0" (1,118) 44.8" (1,138) 46.4" (1,179) 58.5" (1,486) D 29.8" (757) 29.8" (757) 31.9" (810) 34.0" (864) 46.4" (1,178) E 2.3" (58) 2.3" (58) 4.5" (114) 4.5" (114) 8.4" (212) F 1.1" (28) 1.1" (28) 1.5" (38) 1.1" (28) 1.8" (44) G 21.0" (533) 21.0" (533) 26.0" (660) 26.0" (660) 34.0" (863) H 13.4" (340) 13.4" (340) 13.0" (330) 13.0" (330) 8.8" (222) Weight lb (kg) 2,095 (952) 2,230 (1,014) 2,605 (1,184) 3,985 (1,811) 9,577 (4,353)
3 Maximum W.P. at 100F (38C). 4 All 10" meters with Viton trim have Teon packing gland seals. 5 Standard. Page 2 SS01019 Issue/Rev. 0.7 (7/11)
Ordering Information
Application Operating Conditions Seals Units of Registration Direction of Flow Options and Accessories Batching, Loading, Blending, Inventory Process Control, etc. Liquid Name and sp. gr., Flow Range6, Temp. Range6, Viscosity Range6, Maximum Working Pressure Buna N7 or Viton Gallons, Barrels, Cubic Meters, Tons. Left to right flow (as viewed above) is standard and will be supplied unless right to left flow is specified. As required.
SS01019 Page 3
The specications contained herein are subject to change without notice and any user of said specications should verify from the manufacturer that the specications are currently in effect. Otherwise, the manufacturer assumes no responsibility for the use of specications which may have been changed and are no longer in effect. Contact information is subject to change. For the most current contact information, visit our website at www.fmctechnologies.com/measurementsolutions and click on the Contact Us link in the left-hand column.
Headquarters: 500 North Sam Houston Parkway West, Suite 100, Houston, TX 77067 USA, Phone: +1 (281) 260 2190, Fax: +1 (281) 260 2191 Measurement Products and Equipment: Erie, PA USA +1 (814) 898 5000 Ellerbek, Germany +49 (4101) 3040 Barcelona, Spain +34 (93) 201 0989 Beijing, China +86 (10) 6500 2251 Buenos Aires, Argentina +54 (11) 4312 4736 Burnham, England +44 (1628) 603205 Dubai, United Arab Emirates +971 (4) 883 0303 Los Angeles, CA USA +1 (310) 328 1236 Melbourne, Australia +61 (3) 9807 2818 Moscow, Russia +7 (495) 5648705 Singapore, +65 6861 3011 Integrated Measurement Systems: Corpus Christi, TX USA +1 (361) 289 3400 Kongsberg, Norway +47 (32) 286700 Dubai, United Arab Emirates +971 (4) 883 0303